blob: b7adf13acc9facddc3a05f8b3859042f276e3994 [file] [log] [blame]
---
# Copyright 2019 Ciena Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# IMAGE SELECTION
# ---------------
# By default no defaults are set and the image tags specified in the helm
# charts will be used. If you would like to use the images generated from the
# HEAD of the "master" git branches, then uncomment this below block and
# set "<VALUE>" to "master". Similarly, if you want to use the images
# generated from the HEAD of the "voltha-2.1" git branches, then uncomment
# this block and replace "<VALUE>" with "voltha-2.1".
defaults:
image_tag: master
image_pullPolicy: Always
private_etcd_cluster: false
private_kafka_cluster: false
# OPENONU-ADAPTER IMPLEMENTATION
# ------------------------------
# There are currently two implementations of OPENONU-ADAPTER: the original
# written in Python and the reimplementation written in Go. The variable
# `use_openonu_adapter_go` can be used to optionally use the new Go
# implementation. This is done by setting that value to `true`.
#
# Along with this change you will also may need to set the Docker image
# information below (search for START_OPENONU_ADAPTER_GO).
use_openonu_adapter_go: false
#images:
# onos:
# repository: voltha/voltha-onos
# IMAGE_SELECTION
# ---------------
# The helm chart used to deploy ONOS is the public ONOS helm chart so,
# there is a need to specify the exact image repository and image tag.
# If you would like to use the "master", "voltha-2.1", or other image
# just replace the "tag" value below.
# tag: master
# IMAGE_SELECTION
# ---------------
# Below are a list of all the images utilized by kind-voltha. This list is
# provided as a conveinence if you would like to override on a per image
# basis. If you are using the defaults, master, or voltha-2.1 branch there
# is no need to utilize this list.
# adapter_open_olt:
# repository: voltha/voltha-openolt-adapter
# tag: 2.1.1
# adapter_open_onu:
# repository: voltha/voltha-openonu-adapter
# tag: 2.1.0
# adapter_simulated_olt:
# repository: voltha/voltha-adapter-simulated-olt
# tag: 2.1.1
# adapter_simulated_onu:
# repository: voltha/voltha-adapter-simulated-onu
# tag: 2.1.1
# bbsim:
# repository: voltha/bbsim
# tag: master
# ofagent:
# repository: voltha/voltha-ofagent-go
# tag: master
# rw_core:
# repository: voltha/voltha-rw-core
# tag: 2.1.1
# START_OPENONU_ADAPTER_GO - Uncomment the following block to use the
# Go implementation of the openonu-adapter
# adapter_open_onu_go:
# repository: voltha-openonu-adapter-go
# tag: master
# END_OPENONU_ADAPTER_GO
etcd:
replicas: 1
extraEnv:
- name: ETCD_AUTO_COMPACTION_RETENTION
value: "1"
- name: ETCD_SNAPSHOT_COUNT
value: "100000"
- name: ETCD_HEARTBEAT_INTERVAL
value: "100"
- name: ETCD_ELECTION_TIMEOUT
value: "1000"
- name: ETCD_MAX_SNAPSHOTS
value: "5"
- name: ETCD_QUOTA_BACKEND_BYTES
value: "0"
- name: ETCD_MAX_REQUEST_BYTES
value: "1572864"
- name: ETCD_GRPC_KEEPALIVE_MIN_TIME
value: "5s"
- name: ETCD_GRPC_KEEPALIVE_TIMEOUT
value: "5s"
- name: ETCD_DEBUG
value: "false"
kafka:
zookeeper:
replicaCount: 1
persistence:
enabled: false
replicas: 1
persistence:
enabled: false
envOverrides:
KAFKA_LOG4J_ROOT_LOGLEVEL: ERROR
KAFKA_TOOLS_LOG4J_LOGLEVEL: ERROR
# yamllint disable-line rule:line-length
KAFKA_LOG4J.LOGGERS: "kafka.zookeeper=ERROR,state.change.logger=ERROR,kafka=ERROR,kafka.controller=ERROR"
KAFKA_LOG_RETENTION_HOURS: 1
KAFKA_DEFAULT_REPLICATION_FACTOR: 1
KAFKA_OFFSETS_TOPIC_REPLICATION_FACTOR: 1
# voltha:
# fullNameOverride: voltha
# open-olt:
# fullNameOverride: voltha-adapter-openolt
# open-onu:
# fullNameOverride: voltha-adapter-openonu
onos:
image:
repository: voltha/voltha-onos
tag: master
pullPolicy: Always
onos_env:
- name: POD_IP
valueFrom:
fieldRef:
fieldPath: status.podIP
- name: NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
- name: ONOS_APPS
value: "drivers,openflow-base,hostprovider"
# No persistent volume in Atomix to have clean state for each re-deploy of ONOS
atomix:
persistence:
enabled: false
# Customization for BBSIM
bbsim:
nni: 1
pon: 1
onu: 1
sadisFormat: "att"
kafkaEventTopic: "bbsim"
enableEvents: false
# SHOCK THE MONKEY OR LET LOSE THE DOGS OF WAR
# The VOLTHA charts have support for adding extra labels to deployments and
# pods. These extra labels can be used to integrate with other utilities
# such as kube-monkey to add a bit of chaos to the cluster. Below are some
# settings that can be uncommented to opt-in VOLTHA deployments/pods to
# kube-monkey. For example, if you want ALL deployments and pods to opt-in
# then uncomment the `extra_deployment_labels` and `extra_pod_label` blocks.
# If you want to be more selected then comment the blocks that pertain to the
# targets you care about.
# extra_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# extra_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# rw_core_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# rw_core_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# ofagent_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# ofagent_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# openolt_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# openolt_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# openonu_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# openonu_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# simolt_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# simolt_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# simonu_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# simonu_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1