| # Copyright 2019 Ciena Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # IMAGE SELECTION |
| # --------------- |
| # By default no defaults are set and the image tags specified in the helm |
| # charts will be used. If you would like to use the images generated from the |
| # HEAD of the "master" git branches, then uncomment this below block and |
| # set "<VALUE>" to "master". Similarly, if you want to use the images |
| # generated from the HEAD of the "voltha-2.1" git branches, then uncomment |
| # this block and replace "<VALUE>" with "voltha-2.1". |
| defaults: |
| image_tag: master |
| |
| # OFAGENT IMPLEMENTATION |
| # ---------------------- |
| # There are currently two implementations of OFAGENT: the original written in |
| # Python and the reimplementation written in Go. The variable `use_ofagent_go` |
| # can be used to optionally use the new Go implementation. This is done by |
| # setting that value to `true`. Along with this change you will also need |
| # to set the Docker image information below (search for START_OFAGENT_GO). |
| use_ofagent_go: false |
| |
| ofagent: |
| log_level: debug |
| |
| replicas: |
| cli: ~ |
| |
| images: |
| onos: |
| repository: voltha/voltha-onos |
| # IMAGE_SELECTION |
| # --------------- |
| # The helm chart used to deploy ONOS is the public ONOS helm chart so, |
| # there is a need to specify the exact image repository and image tag. |
| # If you would like to use the "master", "voltha-2.1", or other image |
| # just replace the "tag" value below. |
| tag: master |
| |
| # IMAGE_SELECTION |
| # --------------- |
| # Below are a list of all the images utilized by kind-voltha. This list is |
| # provided as a conveinence if you would like to override on a per image |
| # basis. If you are using the defaults, master, or voltha-2.1 branch there |
| # is no need to utilize this list. |
| # adapter_open_olt: |
| # repository: voltha/voltha-openolt-adapter |
| # tag: 2.1.1 |
| # adapter_open_onu: |
| # repository: voltha/voltha-openonu-adapter |
| # tag: 2.1.0 |
| # adapter_simulated_olt: |
| # repository: voltha/voltha-adapter-simulated-olt |
| # tag: master |
| # adapter_simulated_onu: |
| # repository: voltha/voltha-adapter-simulated-onu |
| # tag: master |
| # bbsim: |
| # repository: voltha/bbsim |
| # tag: master |
| # afrouter: |
| # repository: voltha/voltha-afrouter |
| # tag: master |
| # afrouterd: |
| # repository: voltha/voltha-afrouterd |
| # tag: master |
| # cli: |
| # repository: voltha/voltha-cli |
| # tag: 2.1.1 |
| # START_OFAGENT_GO - Uncomment the following block to use the Go implementation |
| # of the ofagent |
| # ofagent: |
| # repository: voltha/ofagent-go |
| # tag: master |
| # END_OFAGENT_GO |
| # ofagent: |
| # repository: volta/voltha-ofagent-go |
| # tag: 2.1.1 |
| # ro_core: |
| # repository: voltha/voltha-ro-core |
| # tag: 2.1.1 |
| # rw_core: |
| # repository: voltha/voltha-rw-core |
| # tag: 2.1.1 |
| |
| deployments: |
| etcdOperator: true |
| backupOperator: false |
| restoreOperator: false |
| |
| voltha-etcd-cluster: |
| clusterSize: 1 |
| autoCompactionRetention: 1 |
| |
| onos_env: |
| - name: POD_IP |
| valueFrom: |
| fieldRef: |
| fieldPath: status.podIP |
| - name: NAMESPACE |
| valueFrom: |
| fieldRef: |
| fieldPath: metadata.namespace |
| - name: ONOS_APPS |
| value: "drivers,openflow-base,hostprovider" |
| |
| # Customization for BBSIM |
| kafka_broker: 'voltha-kafka.voltha.svc.cluster.local:9092' |
| pon_ports: 1 |
| onus_per_pon_port: 1 |
| auth: true |
| dhcp: true |
| |
| # SHOCK THE MONKEY OR LET LOSE THE DOGS OF WAR |
| # The VOLTHA charts have support for adding extra labels to deployments and |
| # pods. These extra labels can be used to integrate with other utilities |
| # such as kube-monkey to add a bit of chaos to the cluster. Below are some |
| # settings that can be uncommented to opt-in VOLTHA deployments/pods to |
| # kube-monkey. For example, if you want ALL deployments and pods to opt-in |
| # then uncomment the `extra_deployment_labels` and `extra_pod_label` blocks. |
| # If you want to be more selected then comment the blocks that pertain to the |
| # targets you care about. |
| |
| #extra_deployment_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #extra_pod_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #rw_core_deployment_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #rw_core_pod_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #ro_core_deployment_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #ro_core_pod_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #ofagent_deployment_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #ofagent_pod_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #openolt_deployment_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #openolt_pod_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #openonu_deployment_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #openonu_pod_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #simolt_deployment_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #simolt_pod_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #simonu_deployment_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |
| # |
| #simonu_pod_labels: |
| # kube-monkey/enabled: enabled |
| # kube-monkey/identifier: monkey-victim |
| # kube-monkey/mtbf: 1 |
| # kube-monkey/kill-mode: fixed |
| # kube-monkey/kill-value: 1 |