VOL-2408 - Refactor / Use voltha-lib-go Logging
Change-Id: I6e7d9eaba49c104cd50bb5692a2ff9733014fac4
diff --git a/vendor/github.com/opencord/voltha-lib-go/v2/pkg/log/log.go b/vendor/github.com/opencord/voltha-lib-go/v2/pkg/log/log.go
new file mode 100644
index 0000000..fe3a4e0
--- /dev/null
+++ b/vendor/github.com/opencord/voltha-lib-go/v2/pkg/log/log.go
@@ -0,0 +1,763 @@
+/*
+ * Copyright 2018-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//Package log provides a structured Logger interface implemented using zap logger. It provides the following capabilities:
+//1. Package level logging - a go package can register itself (AddPackage) and have a logger created for that package.
+//2. Dynamic log level change - for all registered packages (SetAllLogLevel)
+//3. Dynamic log level change - for a given package (SetPackageLogLevel)
+//4. Provides a default logger for unregistered packages
+//5. Allow key-value pairs to be added to a logger(UpdateLogger) or all loggers (UpdateAllLoggers) at run time
+//6. Add to the log output the location where the log was invoked (filename.functionname.linenumber)
+//
+// Using package-level logging (recommended approach). In the examples below, log refers to this log package.
+// 1. In the appropriate package add the following in the init section of the package. The log level can be changed
+// and any number of default fields can be added as well. The log level specifies the lowest log level that will be
+// in the output while the fields will be automatically added to all log printouts.
+//
+// log.AddPackage(mylog.JSON, log.WarnLevel, log.Fields{"anyFieldName": "any value"})
+//
+//2. In the calling package, just invoke any of the publicly available functions of the logger. Here is an example
+// to write an Info log with additional fields:
+//
+//log.Infow("An example", mylog.Fields{"myStringOutput": "output", "myIntOutput": 2})
+//
+//3. To dynamically change the log level, you can use 1)SetLogLevel from inside your package or 2) SetPackageLogLevel
+// from anywhere or 3) SetAllLogLevel from anywhere.
+//
+
+package log
+
+import (
+ "errors"
+ "fmt"
+ zp "go.uber.org/zap"
+ zc "go.uber.org/zap/zapcore"
+ "path"
+ "runtime"
+ "strings"
+)
+
+const (
+ // DebugLevel logs a message at debug level
+ DebugLevel = iota
+ // InfoLevel logs a message at info level
+ InfoLevel
+ // WarnLevel logs a message at warning level
+ WarnLevel
+ // ErrorLevel logs a message at error level
+ ErrorLevel
+ // PanicLevel logs a message, then panics.
+ PanicLevel
+ // FatalLevel logs a message, then calls os.Exit(1).
+ FatalLevel
+)
+
+// CONSOLE formats the log for the console, mostly used during development
+const CONSOLE = "console"
+
+// JSON formats the log using json format, mostly used by an automated logging system consumption
+const JSON = "json"
+
+// Logger represents an abstract logging interface. Any logging implementation used
+// will need to abide by this interface
+type Logger interface {
+ Debug(...interface{})
+ Debugln(...interface{})
+ Debugf(string, ...interface{})
+ Debugw(string, Fields)
+
+ Info(...interface{})
+ Infoln(...interface{})
+ Infof(string, ...interface{})
+ Infow(string, Fields)
+
+ Warn(...interface{})
+ Warnln(...interface{})
+ Warnf(string, ...interface{})
+ Warnw(string, Fields)
+
+ Error(...interface{})
+ Errorln(...interface{})
+ Errorf(string, ...interface{})
+ Errorw(string, Fields)
+
+ Fatal(...interface{})
+ Fatalln(...interface{})
+ Fatalf(string, ...interface{})
+ Fatalw(string, Fields)
+
+ With(Fields) Logger
+
+ // The following are added to be able to use this logger as a gRPC LoggerV2 if needed
+ //
+ Warning(...interface{})
+ Warningln(...interface{})
+ Warningf(string, ...interface{})
+
+ // V reports whether verbosity level l is at least the requested verbose level.
+ V(l int) bool
+}
+
+// Fields is used as key-value pairs for structured logging
+type Fields map[string]interface{}
+
+var defaultLogger *logger
+var cfg zp.Config
+
+var loggers map[string]*logger
+var cfgs map[string]zp.Config
+
+type logger struct {
+ log *zp.SugaredLogger
+ parent *zp.Logger
+}
+
+func intToAtomicLevel(l int) zp.AtomicLevel {
+ switch l {
+ case DebugLevel:
+ return zp.NewAtomicLevelAt(zc.DebugLevel)
+ case InfoLevel:
+ return zp.NewAtomicLevelAt(zc.InfoLevel)
+ case WarnLevel:
+ return zp.NewAtomicLevelAt(zc.WarnLevel)
+ case ErrorLevel:
+ return zp.NewAtomicLevelAt(zc.ErrorLevel)
+ case PanicLevel:
+ return zp.NewAtomicLevelAt(zc.PanicLevel)
+ case FatalLevel:
+ return zp.NewAtomicLevelAt(zc.FatalLevel)
+ }
+ return zp.NewAtomicLevelAt(zc.ErrorLevel)
+}
+
+func intToLevel(l int) zc.Level {
+ switch l {
+ case DebugLevel:
+ return zc.DebugLevel
+ case InfoLevel:
+ return zc.InfoLevel
+ case WarnLevel:
+ return zc.WarnLevel
+ case ErrorLevel:
+ return zc.ErrorLevel
+ case PanicLevel:
+ return zc.PanicLevel
+ case FatalLevel:
+ return zc.FatalLevel
+ }
+ return zc.ErrorLevel
+}
+
+func levelToInt(l zc.Level) int {
+ switch l {
+ case zc.DebugLevel:
+ return DebugLevel
+ case zc.InfoLevel:
+ return InfoLevel
+ case zc.WarnLevel:
+ return WarnLevel
+ case zc.ErrorLevel:
+ return ErrorLevel
+ case zc.PanicLevel:
+ return PanicLevel
+ case FatalLevel:
+ return FatalLevel
+ }
+ return ErrorLevel
+}
+
+func getDefaultConfig(outputType string, level int, defaultFields Fields) zp.Config {
+ return zp.Config{
+ Level: intToAtomicLevel(level),
+ Encoding: outputType,
+ Development: true,
+ OutputPaths: []string{"stdout"},
+ ErrorOutputPaths: []string{"stderr"},
+ InitialFields: defaultFields,
+ EncoderConfig: zc.EncoderConfig{
+ LevelKey: "level",
+ MessageKey: "msg",
+ TimeKey: "ts",
+ StacktraceKey: "stacktrace",
+ LineEnding: zc.DefaultLineEnding,
+ EncodeLevel: zc.LowercaseLevelEncoder,
+ EncodeTime: zc.ISO8601TimeEncoder,
+ EncodeDuration: zc.SecondsDurationEncoder,
+ EncodeCaller: zc.ShortCallerEncoder,
+ },
+ }
+}
+
+// SetLogger needs to be invoked before the logger API can be invoked. This function
+// initialize the default logger (zap's sugaredlogger)
+func SetDefaultLogger(outputType string, level int, defaultFields Fields) (Logger, error) {
+ // Build a custom config using zap
+ cfg = getDefaultConfig(outputType, level, defaultFields)
+
+ l, err := cfg.Build()
+ if err != nil {
+ return nil, err
+ }
+
+ defaultLogger = &logger{
+ log: l.Sugar(),
+ parent: l,
+ }
+
+ return defaultLogger, nil
+}
+
+// AddPackage registers a package to the log map. Each package gets its own logger which allows
+// its config (loglevel) to be changed dynamically without interacting with the other packages.
+// outputType is JSON, level is the lowest level log to output with this logger and defaultFields is a map of
+// key-value pairs to always add to the output.
+// Note: AddPackage also returns a reference to the actual logger. If a calling package uses this reference directly
+//instead of using the publicly available functions in this log package then a number of functionalities will not
+// be available to it, notably log tracing with filename.functionname.linenumber annotation.
+//
+// pkgNames parameter should be used for testing only as this function detects the caller's package.
+func AddPackage(outputType string, level int, defaultFields Fields, pkgNames ...string) (Logger, error) {
+ if cfgs == nil {
+ cfgs = make(map[string]zp.Config)
+ }
+ if loggers == nil {
+ loggers = make(map[string]*logger)
+ }
+
+ var pkgName string
+ for _, name := range pkgNames {
+ pkgName = name
+ break
+ }
+ if pkgName == "" {
+ pkgName, _, _, _ = getCallerInfo()
+ }
+
+ if _, exist := loggers[pkgName]; exist {
+ return loggers[pkgName], nil
+ }
+
+ cfgs[pkgName] = getDefaultConfig(outputType, level, defaultFields)
+
+ l, err := cfgs[pkgName].Build()
+ if err != nil {
+ return nil, err
+ }
+
+ loggers[pkgName] = &logger{
+ log: l.Sugar(),
+ parent: l,
+ }
+ return loggers[pkgName], nil
+}
+
+//UpdateAllLoggers create new loggers for all registered pacakges with the defaultFields.
+func UpdateAllLoggers(defaultFields Fields) error {
+ for pkgName, cfg := range cfgs {
+ for k, v := range defaultFields {
+ if cfg.InitialFields == nil {
+ cfg.InitialFields = make(map[string]interface{})
+ }
+ cfg.InitialFields[k] = v
+ }
+ l, err := cfg.Build()
+ if err != nil {
+ return err
+ }
+
+ loggers[pkgName] = &logger{
+ log: l.Sugar(),
+ parent: l,
+ }
+ }
+ return nil
+}
+
+// Return a list of all packages that have individually-configured loggers
+func GetPackageNames() []string {
+ i := 0
+ keys := make([]string, len(loggers))
+ for k := range loggers {
+ keys[i] = k
+ i++
+ }
+ return keys
+}
+
+// UpdateLogger deletes the logger associated with a caller's package and creates a new logger with the
+// defaultFields. If a calling package is holding on to a Logger reference obtained from AddPackage invocation, then
+// that package needs to invoke UpdateLogger if it needs to make changes to the default fields and obtain a new logger
+// reference
+func UpdateLogger(defaultFields Fields) (Logger, error) {
+ pkgName, _, _, _ := getCallerInfo()
+ if _, exist := loggers[pkgName]; !exist {
+ return nil, errors.New(fmt.Sprintf("package-%s-not-registered", pkgName))
+ }
+
+ // Build a new logger
+ if _, exist := cfgs[pkgName]; !exist {
+ return nil, errors.New(fmt.Sprintf("config-%s-not-registered", pkgName))
+ }
+
+ cfg := cfgs[pkgName]
+ for k, v := range defaultFields {
+ if cfg.InitialFields == nil {
+ cfg.InitialFields = make(map[string]interface{})
+ }
+ cfg.InitialFields[k] = v
+ }
+ l, err := cfg.Build()
+ if err != nil {
+ return nil, err
+ }
+
+ // Set the logger
+ loggers[pkgName] = &logger{
+ log: l.Sugar(),
+ parent: l,
+ }
+ return loggers[pkgName], nil
+}
+
+func setLevel(cfg zp.Config, level int) {
+ switch level {
+ case DebugLevel:
+ cfg.Level.SetLevel(zc.DebugLevel)
+ case InfoLevel:
+ cfg.Level.SetLevel(zc.InfoLevel)
+ case WarnLevel:
+ cfg.Level.SetLevel(zc.WarnLevel)
+ case ErrorLevel:
+ cfg.Level.SetLevel(zc.ErrorLevel)
+ case PanicLevel:
+ cfg.Level.SetLevel(zc.PanicLevel)
+ case FatalLevel:
+ cfg.Level.SetLevel(zc.FatalLevel)
+ default:
+ cfg.Level.SetLevel(zc.ErrorLevel)
+ }
+}
+
+//SetPackageLogLevel dynamically sets the log level of a given package to level. This is typically invoked at an
+// application level during debugging
+func SetPackageLogLevel(packageName string, level int) {
+ // Get proper config
+ if cfg, ok := cfgs[packageName]; ok {
+ setLevel(cfg, level)
+ }
+}
+
+//SetAllLogLevel sets the log level of all registered packages to level
+func SetAllLogLevel(level int) {
+ // Get proper config
+ for _, cfg := range cfgs {
+ setLevel(cfg, level)
+ }
+}
+
+//GetPackageLogLevel returns the current log level of a package.
+func GetPackageLogLevel(packageName ...string) (int, error) {
+ var name string
+ if len(packageName) == 1 {
+ name = packageName[0]
+ } else {
+ name, _, _, _ = getCallerInfo()
+ }
+ if cfg, ok := cfgs[name]; ok {
+ return levelToInt(cfg.Level.Level()), nil
+ }
+ return 0, errors.New(fmt.Sprintf("unknown-package-%s", name))
+}
+
+//GetDefaultLogLevel gets the log level used for packages that don't have specific loggers
+func GetDefaultLogLevel() int {
+ return levelToInt(cfg.Level.Level())
+}
+
+//SetLogLevel sets the log level for the logger corresponding to the caller's package
+func SetLogLevel(level int) error {
+ pkgName, _, _, _ := getCallerInfo()
+ if _, exist := cfgs[pkgName]; !exist {
+ return errors.New(fmt.Sprintf("unregistered-package-%s", pkgName))
+ }
+ cfg := cfgs[pkgName]
+ setLevel(cfg, level)
+ return nil
+}
+
+//SetDefaultLogLevel sets the log level used for packages that don't have specific loggers
+func SetDefaultLogLevel(level int) {
+ setLevel(cfg, level)
+}
+
+// CleanUp flushed any buffered log entries. Applications should take care to call
+// CleanUp before exiting.
+func CleanUp() error {
+ for _, logger := range loggers {
+ if logger != nil {
+ if logger.parent != nil {
+ if err := logger.parent.Sync(); err != nil {
+ return err
+ }
+ }
+ }
+ }
+ if defaultLogger != nil {
+ if defaultLogger.parent != nil {
+ if err := defaultLogger.parent.Sync(); err != nil {
+ return err
+ }
+ }
+ }
+ return nil
+}
+
+func getCallerInfo() (string, string, string, int) {
+ // Since the caller of a log function is one stack frame before (in terms of stack higher level) the log.go
+ // filename, then first look for the last log.go filename and then grab the caller info one level higher.
+ maxLevel := 3
+ skiplevel := 3 // Level with the most empirical success to see the last log.go stack frame.
+ pc := make([]uintptr, maxLevel)
+ n := runtime.Callers(skiplevel, pc)
+ packageName := ""
+ funcName := ""
+ fileName := ""
+ var line int
+ if n == 0 {
+ return packageName, fileName, funcName, line
+ }
+ frames := runtime.CallersFrames(pc[:n])
+ var frame runtime.Frame
+ var foundFrame runtime.Frame
+ more := true
+ for more {
+ frame, more = frames.Next()
+ _, fileName = path.Split(frame.File)
+ if fileName != "log.go" {
+ foundFrame = frame // First frame after log.go in the frame stack
+ break
+ }
+ }
+ parts := strings.Split(foundFrame.Function, ".")
+ pl := len(parts)
+ if pl >= 2 {
+ funcName = parts[pl-1]
+ if parts[pl-2][0] == '(' {
+ packageName = strings.Join(parts[0:pl-2], ".")
+ } else {
+ packageName = strings.Join(parts[0:pl-1], ".")
+ }
+ }
+
+ if strings.HasSuffix(packageName, ".init") {
+ packageName = strings.TrimSuffix(packageName, ".init")
+ }
+
+ if strings.HasSuffix(fileName, ".go") {
+ fileName = strings.TrimSuffix(fileName, ".go")
+ }
+
+ return packageName, fileName, funcName, foundFrame.Line
+}
+
+func getPackageLevelSugaredLogger() *zp.SugaredLogger {
+ pkgName, fileName, funcName, line := getCallerInfo()
+ if _, exist := loggers[pkgName]; exist {
+ return loggers[pkgName].log.With("caller", fmt.Sprintf("%s.%s:%d", fileName, funcName, line))
+ }
+ return defaultLogger.log.With("caller", fmt.Sprintf("%s.%s:%d", fileName, funcName, line))
+}
+
+func getPackageLevelLogger() Logger {
+ pkgName, _, _, _ := getCallerInfo()
+ if _, exist := loggers[pkgName]; exist {
+ return loggers[pkgName]
+ }
+ return defaultLogger
+}
+
+func serializeMap(fields Fields) []interface{} {
+ data := make([]interface{}, len(fields)*2)
+ i := 0
+ for k, v := range fields {
+ data[i] = k
+ data[i+1] = v
+ i = i + 2
+ }
+ return data
+}
+
+// With returns a logger initialized with the key-value pairs
+func (l logger) With(keysAndValues Fields) Logger {
+ return logger{log: l.log.With(serializeMap(keysAndValues)...), parent: l.parent}
+}
+
+// Debug logs a message at level Debug on the standard logger.
+func (l logger) Debug(args ...interface{}) {
+ l.log.Debug(args...)
+}
+
+// Debugln logs a message at level Debug on the standard logger with a line feed. Default in any case.
+func (l logger) Debugln(args ...interface{}) {
+ l.log.Debug(args...)
+}
+
+// Debugw logs a message at level Debug on the standard logger.
+func (l logger) Debugf(format string, args ...interface{}) {
+ l.log.Debugf(format, args...)
+}
+
+// Debugw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Debugw(msg string, keysAndValues Fields) {
+ l.log.Debugw(msg, serializeMap(keysAndValues)...)
+}
+
+// Info logs a message at level Info on the standard logger.
+func (l logger) Info(args ...interface{}) {
+ l.log.Info(args...)
+}
+
+// Infoln logs a message at level Info on the standard logger with a line feed. Default in any case.
+func (l logger) Infoln(args ...interface{}) {
+ l.log.Info(args...)
+ //msg := fmt.Sprintln(args...)
+ //l.sourced().Info(msg[:len(msg)-1])
+}
+
+// Infof logs a message at level Info on the standard logger.
+func (l logger) Infof(format string, args ...interface{}) {
+ l.log.Infof(format, args...)
+}
+
+// Infow logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Infow(msg string, keysAndValues Fields) {
+ l.log.Infow(msg, serializeMap(keysAndValues)...)
+}
+
+// Warn logs a message at level Warn on the standard logger.
+func (l logger) Warn(args ...interface{}) {
+ l.log.Warn(args...)
+}
+
+// Warnln logs a message at level Warn on the standard logger with a line feed. Default in any case.
+func (l logger) Warnln(args ...interface{}) {
+ l.log.Warn(args...)
+}
+
+// Warnf logs a message at level Warn on the standard logger.
+func (l logger) Warnf(format string, args ...interface{}) {
+ l.log.Warnf(format, args...)
+}
+
+// Warnw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Warnw(msg string, keysAndValues Fields) {
+ l.log.Warnw(msg, serializeMap(keysAndValues)...)
+}
+
+// Error logs a message at level Error on the standard logger.
+func (l logger) Error(args ...interface{}) {
+ l.log.Error(args...)
+}
+
+// Errorln logs a message at level Error on the standard logger with a line feed. Default in any case.
+func (l logger) Errorln(args ...interface{}) {
+ l.log.Error(args...)
+}
+
+// Errorf logs a message at level Error on the standard logger.
+func (l logger) Errorf(format string, args ...interface{}) {
+ l.log.Errorf(format, args...)
+}
+
+// Errorw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Errorw(msg string, keysAndValues Fields) {
+ l.log.Errorw(msg, serializeMap(keysAndValues)...)
+}
+
+// Fatal logs a message at level Fatal on the standard logger.
+func (l logger) Fatal(args ...interface{}) {
+ l.log.Fatal(args...)
+}
+
+// Fatalln logs a message at level Fatal on the standard logger with a line feed. Default in any case.
+func (l logger) Fatalln(args ...interface{}) {
+ l.log.Fatal(args...)
+}
+
+// Fatalf logs a message at level Fatal on the standard logger.
+func (l logger) Fatalf(format string, args ...interface{}) {
+ l.log.Fatalf(format, args...)
+}
+
+// Fatalw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func (l logger) Fatalw(msg string, keysAndValues Fields) {
+ l.log.Fatalw(msg, serializeMap(keysAndValues)...)
+}
+
+// Warning logs a message at level Warn on the standard logger.
+func (l logger) Warning(args ...interface{}) {
+ l.log.Warn(args...)
+}
+
+// Warningln logs a message at level Warn on the standard logger with a line feed. Default in any case.
+func (l logger) Warningln(args ...interface{}) {
+ l.log.Warn(args...)
+}
+
+// Warningf logs a message at level Warn on the standard logger.
+func (l logger) Warningf(format string, args ...interface{}) {
+ l.log.Warnf(format, args...)
+}
+
+// V reports whether verbosity level l is at least the requested verbose level.
+func (l logger) V(level int) bool {
+ return l.parent.Core().Enabled(intToLevel(level))
+}
+
+// With returns a logger initialized with the key-value pairs
+func With(keysAndValues Fields) Logger {
+ return logger{log: getPackageLevelSugaredLogger().With(serializeMap(keysAndValues)...), parent: defaultLogger.parent}
+}
+
+// Debug logs a message at level Debug on the standard logger.
+func Debug(args ...interface{}) {
+ getPackageLevelSugaredLogger().Debug(args...)
+}
+
+// Debugln logs a message at level Debug on the standard logger.
+func Debugln(args ...interface{}) {
+ getPackageLevelSugaredLogger().Debug(args...)
+}
+
+// Debugf logs a message at level Debug on the standard logger.
+func Debugf(format string, args ...interface{}) {
+ getPackageLevelSugaredLogger().Debugf(format, args...)
+}
+
+// Debugw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func Debugw(msg string, keysAndValues Fields) {
+ getPackageLevelSugaredLogger().Debugw(msg, serializeMap(keysAndValues)...)
+}
+
+// Info logs a message at level Info on the standard logger.
+func Info(args ...interface{}) {
+ getPackageLevelSugaredLogger().Info(args...)
+}
+
+// Infoln logs a message at level Info on the standard logger.
+func Infoln(args ...interface{}) {
+ getPackageLevelSugaredLogger().Info(args...)
+}
+
+// Infof logs a message at level Info on the standard logger.
+func Infof(format string, args ...interface{}) {
+ getPackageLevelSugaredLogger().Infof(format, args...)
+}
+
+//Infow logs a message with some additional context. The variadic key-value
+//pairs are treated as they are in With.
+func Infow(msg string, keysAndValues Fields) {
+ getPackageLevelSugaredLogger().Infow(msg, serializeMap(keysAndValues)...)
+}
+
+// Warn logs a message at level Warn on the standard logger.
+func Warn(args ...interface{}) {
+ getPackageLevelSugaredLogger().Warn(args...)
+}
+
+// Warnln logs a message at level Warn on the standard logger.
+func Warnln(args ...interface{}) {
+ getPackageLevelSugaredLogger().Warn(args...)
+}
+
+// Warnf logs a message at level Warn on the standard logger.
+func Warnf(format string, args ...interface{}) {
+ getPackageLevelSugaredLogger().Warnf(format, args...)
+}
+
+// Warnw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func Warnw(msg string, keysAndValues Fields) {
+ getPackageLevelSugaredLogger().Warnw(msg, serializeMap(keysAndValues)...)
+}
+
+// Error logs a message at level Error on the standard logger.
+func Error(args ...interface{}) {
+ getPackageLevelSugaredLogger().Error(args...)
+}
+
+// Errorln logs a message at level Error on the standard logger.
+func Errorln(args ...interface{}) {
+ getPackageLevelSugaredLogger().Error(args...)
+}
+
+// Errorf logs a message at level Error on the standard logger.
+func Errorf(format string, args ...interface{}) {
+ getPackageLevelSugaredLogger().Errorf(format, args...)
+}
+
+// Errorw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func Errorw(msg string, keysAndValues Fields) {
+ getPackageLevelSugaredLogger().Errorw(msg, serializeMap(keysAndValues)...)
+}
+
+// Fatal logs a message at level Fatal on the standard logger.
+func Fatal(args ...interface{}) {
+ getPackageLevelSugaredLogger().Fatal(args...)
+}
+
+// Fatalln logs a message at level Fatal on the standard logger.
+func Fatalln(args ...interface{}) {
+ getPackageLevelSugaredLogger().Fatal(args...)
+}
+
+// Fatalf logs a message at level Fatal on the standard logger.
+func Fatalf(format string, args ...interface{}) {
+ getPackageLevelSugaredLogger().Fatalf(format, args...)
+}
+
+// Fatalw logs a message with some additional context. The variadic key-value
+// pairs are treated as they are in With.
+func Fatalw(msg string, keysAndValues Fields) {
+ getPackageLevelSugaredLogger().Fatalw(msg, serializeMap(keysAndValues)...)
+}
+
+// Warning logs a message at level Warn on the standard logger.
+func Warning(args ...interface{}) {
+ getPackageLevelSugaredLogger().Warn(args...)
+}
+
+// Warningln logs a message at level Warn on the standard logger.
+func Warningln(args ...interface{}) {
+ getPackageLevelSugaredLogger().Warn(args...)
+}
+
+// Warningf logs a message at level Warn on the standard logger.
+func Warningf(format string, args ...interface{}) {
+ getPackageLevelSugaredLogger().Warnf(format, args...)
+}
+
+// V reports whether verbosity level l is at least the requested verbose level.
+func V(level int) bool {
+ return getPackageLevelLogger().V(level)
+}