| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import unittest |
| import functools |
| from mock import patch, call, Mock, PropertyMock |
| import requests_mock |
| |
| import os, sys |
| |
| # Hack to load synchronizer framework |
| test_path=os.path.abspath(os.path.dirname(os.path.realpath(__file__))) |
| xos_dir=os.path.join(test_path, "../../..") |
| if not os.path.exists(os.path.join(test_path, "new_base")): |
| xos_dir=os.path.join(test_path, "../../../../../../orchestration/xos/xos") |
| services_dir = os.path.join(xos_dir, "../../xos_services") |
| sys.path.append(xos_dir) |
| sys.path.append(os.path.join(xos_dir, 'synchronizers', 'new_base')) |
| # END of hack to load synchronizer framework |
| |
| # Generate model from xproto |
| def get_models_fn(service_name, xproto_name): |
| name = os.path.join(service_name, "xos", xproto_name) |
| if os.path.exists(os.path.join(services_dir, name)): |
| return name |
| else: |
| name = os.path.join(service_name, "xos", "synchronizer", "models", xproto_name) |
| if os.path.exists(os.path.join(services_dir, name)): |
| return name |
| raise Exception("Unable to find service=%s xproto=%s" % (service_name, xproto_name)) |
| # END generate model from xproto |
| |
| def match_onos_req(req): |
| request = req.json()['devices'] |
| if not request['of:0000000ce2314000']: |
| return False |
| else: |
| if not request['of:0000000ce2314000']['basic']['driver'] == 'voltha': |
| return False |
| if not request['of:0000000ce2314000']['accessDevice']['vlan'] == 1 or not request['of:0000000ce2314000']['accessDevice']['uplink'] == "129": |
| return False |
| return True |
| |
| def match_json(desired, req): |
| if desired!=req.json(): |
| raise Exception("Got request %s, but body is not matching" % req.url) |
| return False |
| return True |
| |
| class TestSyncOLTDevice(unittest.TestCase): |
| def setUp(self): |
| global DeferredException |
| self.sys_path_save = sys.path |
| sys.path.append(xos_dir) |
| sys.path.append(os.path.join(xos_dir, 'synchronizers', 'new_base')) |
| |
| # Setting up the config module |
| from xosconfig import Config |
| config = os.path.join(test_path, "../model_policies/test_config.yaml") |
| Config.clear() |
| Config.init(config, "synchronizer-config-schema.yaml") |
| # END setting up the config module |
| |
| from synchronizers.new_base.mock_modelaccessor_build import build_mock_modelaccessor |
| # build_mock_modelaccessor(xos_dir, services_dir, [get_models_fn("olt-service", "volt.xproto")]) |
| |
| # FIXME this is to get jenkins to pass the tests, somehow it is running tests in a different order |
| # and apparently it is not overriding the generated model accessor |
| build_mock_modelaccessor(xos_dir, services_dir, [get_models_fn("olt-service", "volt.xproto"), |
| get_models_fn("vsg", "vsg.xproto"), |
| get_models_fn("../profiles/rcord", "rcord.xproto")]) |
| |
| import synchronizers.new_base.modelaccessor |
| from sync_olt_device import SyncOLTDevice, DeferredException |
| self.sync_step = SyncOLTDevice |
| |
| pon_port = Mock() |
| pon_port.port_id = "00ff00" |
| |
| # Create a mock OLTDevice |
| o = Mock() |
| o.volt_service.voltha_url = "voltha_url" |
| o.volt_service.voltha_port = 1234 |
| o.volt_service.voltha_user = "voltha_user" |
| o.volt_service.voltha_pass = "voltha_pass" |
| |
| o.device_type = "ponsim_olt" |
| o.host = "172.17.0.1" |
| o.port = "50060" |
| o.uplink = "129" |
| o.driver = "voltha" |
| |
| # feedback state |
| o.device_id = None |
| o.admin_state = None |
| o.oper_status = None |
| o.of_id = None |
| o.id = 1 |
| |
| o.tologdict.return_value = {'name': "Mock VOLTServiceInstance"} |
| |
| o.save.return_value = "Saved" |
| |
| o.pon_ports.all.return_value = [pon_port] |
| |
| self.o = o |
| |
| def tearDown(self): |
| self.o = None |
| sys.path = self.sys_path_save |
| |
| @requests_mock.Mocker() |
| def test_get_of_id_from_device(self, m): |
| logical_devices = { |
| "items": [ |
| {"root_device_id": "123", "id": "0001000ce2314000", "datapath_id": "55334486016"}, |
| {"root_device_id": "0001cc4974a62b87", "id": "0001000000000001"} |
| ] |
| } |
| m.get("http://voltha_url:1234/api/v1/logical_devices", status_code=200, json=logical_devices) |
| self.o.device_id = "123" |
| self.o = self.sync_step.get_ids_from_logical_device(self.o) |
| self.assertEqual(self.o.of_id, "0001000ce2314000") |
| self.assertEqual(self.o.dp_id, "of:0000000ce2314000") |
| |
| with self.assertRaises(Exception) as e: |
| self.o.device_id = "idonotexist" |
| self.sync_step.get_ids_from_logical_device(self.o) |
| self.assertEqual(e.exception.message, "Can't find a logical_device for OLT device id: idonotexist") |
| |
| @requests_mock.Mocker() |
| def test_sync_record_fail_add(self, m): |
| """ |
| Should print an error if we can't add the device in VOLTHA |
| """ |
| m.post("http://voltha_url:1234/api/v1/devices", status_code=500, text="MockError") |
| |
| with self.assertRaises(Exception) as e: |
| self.sync_step().sync_record(self.o) |
| self.assertEqual(e.exception.message, "Failed to add OLT device: MockError") |
| |
| @requests_mock.Mocker() |
| def test_sync_record_fail_no_id(self, m): |
| """ |
| Should print an error if VOLTHA does not return the device id |
| """ |
| m.post("http://voltha_url:1234/api/v1/devices", status_code=200, json={"id": ""}) |
| |
| with self.assertRaises(Exception) as e: |
| self.sync_step().sync_record(self.o) |
| self.assertEqual(e.exception.message, "VOLTHA Device Id is empty. This probably means that the OLT device is already provisioned in VOLTHA") |
| |
| @requests_mock.Mocker() |
| def test_sync_record_fail_enable(self, m): |
| """ |
| Should print an error if device.enable fails |
| """ |
| m.post("http://voltha_url:1234/api/v1/devices", status_code=200, json={"id": "123"}) |
| m.post("http://voltha_url:1234/api/v1/devices/123/enable", status_code=500, text="EnableError") |
| |
| with self.assertRaises(Exception) as e: |
| self.sync_step().sync_record(self.o) |
| |
| self.assertEqual(e.exception.message, "Failed to enable OLT device: EnableError") |
| |
| @requests_mock.Mocker() |
| def test_sync_record_success(self, m): |
| """ |
| If device.enable succed should fetch the state, retrieve the of_id and push it to ONOS |
| """ |
| |
| expected_conf = { |
| "type": self.o.device_type, |
| "host_and_port": "%s:%s" % (self.o.host, self.o.port) |
| } |
| |
| m.post("http://voltha_url:1234/api/v1/devices", status_code=200, json={"id": "123"}, additional_matcher=functools.partial(match_json, expected_conf)) |
| m.post("http://voltha_url:1234/api/v1/devices/123/enable", status_code=200) |
| m.get("http://voltha_url:1234/api/v1/devices/123", json={"oper_status": "ACTIVE", "admin_state": "ENABLED"}) |
| logical_devices = { |
| "items": [ |
| {"root_device_id": "123", "id": "0001000ce2314000", "datapath_id": "55334486016"}, |
| {"root_device_id": "0001cc4974a62b87", "id": "0001000000000001"} |
| ] |
| } |
| m.get("http://voltha_url:1234/api/v1/logical_devices", status_code=200, json=logical_devices) |
| |
| self.sync_step().sync_record(self.o) |
| self.assertEqual(self.o.admin_state, "ENABLED") |
| self.assertEqual(self.o.oper_status, "ACTIVE") |
| self.assertEqual(self.o.of_id, "0001000ce2314000") |
| self.assertEqual(self.o.save.call_count, 2) # we're updating the backend_status when activating and then adding logical device ids |
| |
| @requests_mock.Mocker() |
| def test_sync_record_success_mac_address(self, m): |
| """ |
| A device should be pre-provisioned via mac_address, the the process is the same |
| """ |
| |
| del self.o.host |
| del self.o.port |
| self.o.mac_address = "00:0c:e2:31:40:00" |
| |
| expected_conf = { |
| "type": self.o.device_type, |
| "mac_address": self.o.mac_address |
| } |
| |
| m.post("http://voltha_url:1234/api/v1/devices", status_code=200, json={"id": "123"}, |
| additional_matcher=functools.partial(match_json, expected_conf)) |
| m.post("http://voltha_url:1234/api/v1/devices/123/enable", status_code=200) |
| m.get("http://voltha_url:1234/api/v1/devices/123", json={"oper_status": "ACTIVE", "admin_state": "ENABLED"}) |
| logical_devices = { |
| "items": [ |
| {"root_device_id": "123", "id": "0001000ce2314000", "datapath_id": "55334486016"}, |
| {"root_device_id": "0001cc4974a62b87", "id": "0001000000000001"} |
| ] |
| } |
| m.get("http://voltha_url:1234/api/v1/logical_devices", status_code=200, json=logical_devices) |
| |
| self.sync_step().sync_record(self.o) |
| self.assertEqual(self.o.admin_state, "ENABLED") |
| self.assertEqual(self.o.oper_status, "ACTIVE") |
| self.assertEqual(self.o.of_id, "0001000ce2314000") |
| self.assertEqual(self.o.save.call_count, 2) |
| |
| @requests_mock.Mocker() |
| def test_sync_record_enable_timeout(self, m): |
| """ |
| If device.enable fails we need to tell the suer |
| """ |
| |
| expected_conf = { |
| "type": self.o.device_type, |
| "host_and_port": "%s:%s" % (self.o.host, self.o.port) |
| } |
| |
| m.post("http://voltha_url:1234/api/v1/devices", status_code=200, json={"id": "123"}, |
| additional_matcher=functools.partial(match_json, expected_conf)) |
| m.post("http://voltha_url:1234/api/v1/devices/123/enable", status_code=200) |
| m.get("http://voltha_url:1234/api/v1/devices/123", [ |
| {"json": {"oper_status": "ACTIVATING", "admin_state": "ENABLED"}, "status_code": 200}, |
| {"json": {"oper_status": "ERROR", "admin_state": "FAILED"}, "status_code": 200} |
| ]) |
| |
| logical_devices = { |
| "items": [ |
| {"root_device_id": "123", "id": "0001000ce2314000", "datapath_id": "55334486016"}, |
| {"root_device_id": "0001cc4974a62b87", "id": "0001000000000001"} |
| ] |
| } |
| m.get("http://voltha_url:1234/api/v1/logical_devices", status_code=200, json=logical_devices) |
| |
| with self.assertRaises(Exception) as e: |
| self.sync_step().sync_record(self.o) |
| |
| self.assertEqual(e.exception.message, "It was not possible to activate OLTDevice with id 1") |
| self.assertEqual(self.o.oper_status, "ERROR") |
| self.assertEqual(self.o.admin_state, "FAILED") |
| self.assertEqual(self.o.save.call_count, 1) |
| |
| @requests_mock.Mocker() |
| def test_sync_record_already_existing_in_voltha(self, m): |
| # mock device feedback state |
| self.o.device_id = "123" |
| self.o.admin_state = "ENABLED" |
| self.o.oper_status = "ACTIVE" |
| self.o.dp_id = "of:0000000ce2314000" |
| self.o.of_id = "0001000ce2314000" |
| |
| self.sync_step().sync_record(self.o) |
| self.o.save.assert_not_called() |
| |
| @requests_mock.Mocker() |
| def test_delete_record(self, m): |
| self.o.of_id = "0001000ce2314000" |
| self.o.device_id = "123" |
| |
| m.post("http://voltha_url:1234/api/v1/devices/123/disable", status_code=200) |
| m.delete("http://voltha_url:1234/api/v1/devices/123/delete", status_code=200) |
| |
| self.sync_step().delete_record(self.o) |
| |
| self.assertEqual(m.call_count, 2) |
| |
| @requests_mock.Mocker() |
| def test_delete_unsynced_record(self, m): |
| |
| self.sync_step().delete_record(self.o) |
| |
| self.assertEqual(m.call_count, 0) |
| |
| if __name__ == "__main__": |
| unittest.main() |