| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // IpHostConfigDataClassID is the 16-bit ID for the OMCI |
| // Managed entity IP host config data |
| const IpHostConfigDataClassID = ClassID(134) // 0x0086 |
| |
| var iphostconfigdataBME *ManagedEntityDefinition |
| |
| // IpHostConfigData (Class ID: #134 / 0x0086) |
| // The IP host config data configures IPv4 based services offered on the ONU. The ONU automatically |
| // creates instances of this ME if IP host services are available. A possible IPv6 stack is |
| // supported through the IPv6 host config data ME. In this clause, references to IP addresses are |
| // understood to mean IPv4. |
| // |
| // Relationships |
| // An instance of this ME is associated with the ONU ME. Any number of TCP/UDP config data MEs can |
| // point to the IP host config data, to model any number of ports and protocols. Performance may be |
| // monitored through an implicitly linked IP host PM history data ME. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. The ONU creates as many instances |
| // as there are independent IPv4 stacks on the ONU. To facilitate discovery, IP host config data |
| // MEs should be numbered from 0 upwards. The ONU should create IP(v4) and IPv6 host config data |
| // MEs with separate ME IDs, such that other MEs can use a single TP type attribute to link with |
| // either. (R) (mandatory) (2 bytes) |
| // |
| // Ip Options |
| // This attribute is a bit map that enables or disables IP-related options. The value 1 enables the |
| // option while 0 disables it. The default value of this attribute is 0. |
| // |
| // 0x01 Enable DHCP |
| // |
| // 0x02 Respond to pings |
| // |
| // 0x04 Respond to traceroute messages |
| // |
| // 0x08 Enable IP stack |
| // |
| // 0x10..0x80 Reserved |
| // |
| // (R,-W) (mandatory) (1-byte) |
| // |
| // Mac Address |
| // This attribute indicates the MAC address used by the IP node. (R) (mandatory) (6-bytes) |
| // |
| // Onu Identifier |
| // A unique ONU identifier string. If set to a non-null value, this string is used instead of the |
| // MAC address in retrieving dynamic host configuration protocol (DHCP) parameters. If the string |
| // is shorter than 25 characters, it must be null terminated. Its default value is 25 null bytes. |
| // (R,-W) (mandatory) (25-bytes) |
| // |
| // Several attributes of this ME may be paired together into two categories, manual settings and |
| // current values. |
| // |
| // While the IP stack is disabled, there is no IP connectivity to the external world from this ME |
| // instance. |
| // |
| // While DHCP is disabled, the current values are always the same as the manual settings. While |
| // DHCP is enabled, the current values are those assigned by DHCP, or undefined (0) if DHCP has |
| // never assigned values. |
| // |
| // Ip Address |
| // The address used for IP host services; this attribute has the default value 0. (R,-W) |
| // (mandatory) (4-bytes) |
| // |
| // Mask |
| // The subnet mask for IP host services; this attribute has the default value 0. (R,-W) (mandatory) |
| // (4-bytes) |
| // |
| // Gateway |
| // The default gateway address used for IP host services; this attribute has the default value 0. |
| // (R,-W) (mandatory) (4-bytes) |
| // |
| // Primary Dns |
| // The address of the primary DNS server; this attribute has the default value 0. (R,-W) |
| // (mandatory) (4-bytes) |
| // |
| // Secondary Dns |
| // The address of the secondary DNS server; this attribute has the default value 0. (R,-W) |
| // (mandatory) (4-bytes) |
| // |
| // Current Address |
| // Current address of the IP host service. (R) (optional) (4-bytes) |
| // |
| // Current Mask |
| // Current subnet mask for the IP host service. (R) (optional) (4-bytes) |
| // |
| // Current Gateway |
| // Current default gateway address for the IP host service. (R) (optional) (4-bytes) |
| // |
| // Current Primary Dns |
| // Current primary DNS server address. (R) (optional) (4-bytes) |
| // |
| // Current Secondary Dns |
| // Current secondary DNS server address. (R) (optional) (4-bytes) |
| // |
| // Domain Name |
| // If DHCP indicates a domain name, it is presented here. If no domain name is indicated, this |
| // attribute is set to a null string. If the string is shorter than 25-bytes, it must be null |
| // terminated. The default value is 25 null bytes. (R) (mandatory) (25-bytes) |
| // |
| // Host Name |
| // If DHCP indicates a host name, it is presented here. If no host name is indicated, this |
| // attribute is set to a null string. If the string is shorter than 25-bytes, it must be null |
| // terminated. The default value is 25 null bytes. (R) (mandatory) (25-bytes) |
| // |
| // Relay Agent Options |
| // This attribute is a pointer to a large string ME whose content specifies one or more DHCP relay |
| // agent options. (R, W) (optional) (2-bytes) |
| // |
| // The contents of the large string are parsed by the ONU and converted into text strings. Variable |
| // substitution is based on defined three-character groups, each of which begins with the '%' |
| // character. The string '%%' is an escape mechanism whose output is a single '%' character. When |
| // the ONU cannot perform variable substitution on a substring of the large string, it generates |
| // the specified option as an exact quotation of the provisioned substring value. |
| // |
| // Provisioning of the large string is separate from the operation of setting the pointer in this |
| // attribute. It is the responsibility of the OLT to ensure that the large string contents are |
| // correct and meaningful. |
| // |
| // Three-character variable definitions are as follows. The first variable in the large string must |
| // specify one of the option types. Both options for a given IP version may be present if desired, |
| // each introduced by its option identifier. Terminology is taken from clause 3.9.3 of [b-BBF |
| // TR-101]. |
| // |
| // %01, %18 Specifies that the following string is for option 82 sub-option 1, agent circuit-ID |
| // (IPv4) or option 18, interface-ID (IPv6). The equivalence permits the same large string to be |
| // used in both IP environments. |
| // |
| // %02, %37 Specifies that the following string is for option 82 sub-option 2, relay agent remote- |
| // ID (IPv4) or option 37, relay agent remote-ID (IPv6). The equivalence permits the same large |
| // string to be used in both IP environments. |
| // |
| // %SL In [b-BBF TR-101], this is called a slot. In an ONU, this variable refers to a shelf. It |
| // would be meaningful if the ONU has multiple shelves internally or is daisy-chained to multiple |
| // equipment modules. The range of this variable is "0".. "99" |
| // |
| // %SU In TR-101, this is called a sub-slot. In fact, it represents a cardholder. The range of this |
| // variable is "0".. "99" |
| // |
| // %PO UNI port number. The range of this variable is "0".. "999" |
| // |
| // %AE ATM or Ethernet. This variable can take on the values "atm" or "eth". |
| // |
| // %SV S-VID for Ethernet UNI, or ATM virtual path identifier (VPI) for ATM UNI, as it exists on |
| // the DHCP request received upstream across the UNI. Range "0".. "4096" for S-VID; range "0".. |
| // "255" for VPI. The value "4096" indicates no S-VID tag. |
| // |
| // %CV C-VID (Q-VID) for Ethernet UNI, or ATM virtual circuit identifier (VCI) for ATM UNI, as it |
| // exists on the DHCP request received upstream across the UNI. Range "0".. "4096" for C-VID; range |
| // "0".."65535" for VCI. The value "4096" indicates no C-VID tag. |
| // |
| // Spaces in the provisioned string are significant. |
| // |
| // Example: if the large string were provisioned with the value |
| // |
| // %01%SL/%SU/%PO:%AE/%SV.%CV<null>, |
| // |
| // then the ONU would generate the following DHCP option 82 agent circuit-ID string for an Ethernet |
| // UNI that sent a DHCP request with no S tag and C tag = 3210 on shelf 2, slot 3, port 4. |
| // |
| // 2/3/4:eth/4096.3210 |
| // |
| // With the same provisioning, the ONU would generate the following DHCP option 82 agent circuit-ID |
| // string for an ATM UNI that sent a DHCP request on VPI = 123 and VCI = 4567 on shelf 2, slot 3, |
| // port 4. |
| // |
| // 2/3/4:atm/123.4567 |
| // |
| type IpHostConfigData struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| iphostconfigdataBME = &ManagedEntityDefinition{ |
| Name: "IpHostConfigData", |
| ClassID: 134, |
| MessageTypes: mapset.NewSetWith( |
| Get, |
| Set, |
| Test, |
| ), |
| AllowedAttributeMask: 0xffff, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0), |
| 1: ByteField("IpOptions", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1), |
| 2: MultiByteField("MacAddress", OctetsAttributeType, 0x4000, 6, toOctets("AAAAAAAA"), mapset.NewSetWith(Read), false, false, false, 2), |
| 3: MultiByteField("OnuIdentifier", OctetsAttributeType, 0x2000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 3), |
| 4: Uint32Field("IpAddress", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4), |
| 5: Uint32Field("Mask", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5), |
| 6: Uint32Field("Gateway", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6), |
| 7: Uint32Field("PrimaryDns", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7), |
| 8: Uint32Field("SecondaryDns", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8), |
| 9: Uint32Field("CurrentAddress", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), true, true, false, 9), |
| 10: Uint32Field("CurrentMask", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), true, true, false, 10), |
| 11: Uint32Field("CurrentGateway", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), true, true, false, 11), |
| 12: Uint32Field("CurrentPrimaryDns", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), true, true, false, 12), |
| 13: Uint32Field("CurrentSecondaryDns", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), true, true, false, 13), |
| 14: MultiByteField("DomainName", OctetsAttributeType, 0x0004, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), true, false, false, 14), |
| 15: MultiByteField("HostName", OctetsAttributeType, 0x0002, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read), true, false, false, 15), |
| 16: Uint16Field("RelayAgentOptions", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, Write), true, true, false, 16), |
| }, |
| Access: CreatedByOnu, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewIpHostConfigData (class ID 134) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewIpHostConfigData(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*iphostconfigdataBME, params...) |
| } |