| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // MacBridgePortConfigurationDataClassID is the 16-bit ID for the OMCI |
| // Managed entity MAC bridge port configuration data |
| const MacBridgePortConfigurationDataClassID = ClassID(47) // 0x002f |
| |
| var macbridgeportconfigurationdataBME *ManagedEntityDefinition |
| |
| // MacBridgePortConfigurationData (Class ID: #47 / 0x002f) |
| // This ME models a port on a MAC bridge. Instances of this ME are created and deleted by the OLT. |
| // |
| // Relationships |
| // An instance of this ME is linked to an instance of the MAC bridge service profile. Additional |
| // bridge port control capabilities are provided by implicitly linked instances of some or all of://// o MAC bridge port filter table data;//// o MAC bridge port filter pre-assign table;//// o VLAN tagging filter data;//// o Dot1 rate limiter.//// Real-time status of the bridge port is provided by implicitly linked instances of://// o MAC bridge port designation data;//// o MAC bridge port bridge table data;//// o Multicast subscriber monitor.//// Bridge port PM collection is provided by implicitly linked instances of://// o MAC bridge port PM history data;//// o Ethernet frame PM history data upstream and downstream;//// o Ethernet frame extended PM (preferred). |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory) |
| // (2-bytes) |
| // |
| // Bridge Id Pointer |
| // This attribute points to an instance of the MAC bridge service profile. (R,-W, setbycreate) |
| // (mandatory) (2-bytes) |
| // |
| // Port Num |
| // This attribute is the bridge port number. It must be unique among all ports associated with a |
| // particular MAC bridge service profile. (R,-W, setbycreate) (mandatory) (1-byte) |
| // |
| // Tp Type |
| // This attribute identifies the type of TP associated with this MAC bridge port. Valid values are |
| // as follows. |
| // |
| // 1 Physical path termination point Ethernet UNI |
| // |
| // 2 Interworking virtual circuit connection (VCC) termination point |
| // |
| // 3 IEEE 802.1p mapper service profile |
| // |
| // 4 IP host config data or IPv6 host config data |
| // |
| // 5 GEM interworking termination point |
| // |
| // 6 Multicast GEM interworking termination point |
| // |
| // 7 Physical path termination point xDSL UNI part 1 |
| // |
| // 8 Physical path termination point VDSL UNI |
| // |
| // 9 Ethernet flow termination point |
| // |
| // 10 Reserved |
| // |
| // 11 Virtual Ethernet interface point |
| // |
| // 12 Physical path termination point MoCA UNI |
| // |
| // 13 Ethernet in the first mile (EFM) bonding group |
| // |
| // (R,-W, setbycreate) (mandatory) (1-byte) |
| // |
| // Tp Pointer |
| // NOTE 1 - When the TP type is very high-speed digital subscriber line (VDSL) or xDSL, the two |
| // MSBs may be used to indicate a bearer channel. |
| // |
| // This attribute points to the TP associated with this MAC bridge port. The TP type attribute |
| // indicates the type of the TP; this attribute contains its instance identifier (ME ID). (R,-W, |
| // setbycreate) (mandatory) (2-bytes) |
| // |
| // Port Priority |
| // This attribute denotes the priority of the port for use in (rapid) spanning tree algorithms. The |
| // range is 0..255. (R,-W, setbycreate) (optional) (2-bytes) |
| // |
| // Port Path Cost |
| // This attribute specifies the contribution of the port to the path cost towards the spanning tree |
| // root bridge. The range is 1..65535. (R,-W, setbycreate) (mandatory) (2-bytes) |
| // |
| // Port Spanning Tree Ind |
| // The Boolean value true enables (R)STP LAN topology change detection at this port. The value |
| // false disables topology change detection. (R,-W, setbycreate) (mandatory) (1-byte) |
| // |
| // Deprecated 1 |
| // This attribute is not used. If present, it should be ignored by both the ONU and the OLT, except |
| // as necessary to comply with OMCI message definitions. (R,-W, setbycreate) (optional) (1-byte) |
| // |
| // Deprecated 2 |
| // This attribute is not used. If present, it should be ignored by both the ONU and the OLT, except |
| // as necessary to comply with OMCI message definitions. (R,-W, setbycreate) (1-byte) (optional) |
| // |
| // Port Mac Address |
| // If the TP associated with this port has a MAC address, this attribute specifies it. (R) |
| // (optional) (6-bytes) |
| // |
| // Outbound Td Pointer |
| // This attribute points to a traffic descriptor that limits the traffic rate leaving the MAC |
| // bridge. (R,-W) (optional) (2-byte) |
| // |
| // Inbound Td Pointer |
| // This attribute points to a traffic descriptor that limits the traffic rate entering the MAC |
| // bridge. (R,-W) (optional) (2-byte) |
| // |
| // Mac Learning Depth |
| // This attribute specifies the maximum number of MAC addresses to be learned by this MAC bridge |
| // port. The default value 0 specifies that there is no administratively imposed limit. (R,-W, |
| // setbycreate) (optional) (1-byte) |
| // |
| // NOTE 2 - If this attribute is not zero, its value overrides the value set in the MAC learning |
| // depth attribute of the MAC bridge service profile. |
| // |
| // Lasp Id Pointer |
| // This attribute points to an instance of the LASP ME. (R,W, setbycreate) (optional) (2 bytes) |
| // |
| type MacBridgePortConfigurationData struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| macbridgeportconfigurationdataBME = &ManagedEntityDefinition{ |
| Name: "MacBridgePortConfigurationData", |
| ClassID: 47, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xfffc, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: Uint16Field("BridgeIdPointer", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1), |
| 2: ByteField("PortNum", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2), |
| 3: ByteField("TpType", EnumerationAttributeType, 0x2000, 1, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3), |
| 4: Uint16Field("TpPointer", PointerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4), |
| 5: Uint16Field("PortPriority", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5), |
| 6: Uint16Field("PortPathCost", UnsignedIntegerAttributeType, 0x0400, 1, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6), |
| 7: ByteField("PortSpanningTreeInd", EnumerationAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7), |
| 8: ByteField("Deprecated1", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, true, 8), |
| 9: ByteField("Deprecated2", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, true, 9), |
| 10: MultiByteField("PortMacAddress", OctetsAttributeType, 0x0040, 6, toOctets("AAAAAAAA"), mapset.NewSetWith(Read), false, true, false, 10), |
| 11: Uint16Field("OutboundTdPointer", PointerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11), |
| 12: Uint16Field("InboundTdPointer", PointerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12), |
| 13: ByteField("MacLearningDepth", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 13), |
| 14: Uint16Field("LaspIdPointer", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 14), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| Alarms: AlarmMap{ |
| 0: "Port blocking", |
| }, |
| } |
| } |
| |
| // NewMacBridgePortConfigurationData (class ID 47) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewMacBridgePortConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*macbridgeportconfigurationdataBME, params...) |
| } |