| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // XdslLineInventoryAndStatusDataPart5ClassID is the 16-bit ID for the OMCI |
| // Managed entity xDSL line inventory and status data part 5 |
| const XdslLineInventoryAndStatusDataPart5ClassID = ClassID(325) // 0x0145 |
| |
| var xdsllineinventoryandstatusdatapart5BME *ManagedEntityDefinition |
| |
| // XdslLineInventoryAndStatusDataPart5 (Class ID: #325 / 0x0145) |
| // This ME extends the attributes defined in the xDSL line inventory and status data parts 1..4. |
| // This ME reports FEXT and NEXT attributes, and pertains to Annex C of [ITUT G.992.3] (ADSL2) and |
| // Annex C of [ITUT G.992.5] (ADSL2plus). |
| // |
| // Relationships |
| // This is one of the status data MEs associated with an xDSL UNI. The ONU automatically creates or |
| // deletes an instance of this ME upon creation or deletion of a PPTP xDSL UNI part 1 that supports |
| // these attributes. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is |
| // implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R) (mandatory) (2-bytes) |
| // |
| // Fext Downstream Snr Margin |
| // The FEXT SNRMds attribute is the downstream SNR margin measured during FEXTR duration at the |
| // ATU-R. The attribute value ranges from 0 (-64.0-dB) to 1270 (+63.0-dB). The special value 0xFFFF |
| // indicates that the attribute is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Next Downstream Snr Margin |
| // The NEXT SNRMds attribute is the downstream SNR margin measured during NEXTR duration at the |
| // ATU-R. The attribute value ranges from 0 (-64.0-dB) to 1270 (+63.0-dB). The special value 0xFFFF |
| // indicates that the attribute is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Fext Upstream Snr Margin |
| // The FEXT SNRMus attribute is the upstream SNR margin (see clause 7.5.1.16 of [ITUT G.997.1]) |
| // measured during FEXTC duration at the ATU-C. The attribute value ranges from 0 (-64.0-dB) to |
| // 1270 (+63.0-dB). The special value 0xFFFF indicates that the attribute is out of range. (R) |
| // (mandatory) (2-bytes) |
| // |
| // Next Upstream Snr Margin |
| // The NEXT SNRMus attribute is the upstream SNR margin (see clause 7.5.1.16 of [ITUT-G.997.1]) |
| // measured during NEXTC duration at the ATU-C. The attribute value ranges from 0 (-64.0-dB) to |
| // 1270 (+63.0-dB). The special value 0xFFFF indicates that the attribute is out of range. (R) |
| // (mandatory) (2-bytes) |
| // |
| // Fext Downstream Maximum Attainable Data Rate |
| // The FEXT ATTNDRds attribute is the maximum downstream net data rate calculated from FEXT |
| // downstream SNR(f) (see clause 7.5.1.28.3.1 of [ITUT G.997.1]). The rate is coded in bits per |
| // second. (R) (mandatory) (4-bytes) |
| // |
| // Next Downstream Maximum Attainable Data Rate |
| // The NEXT ATTNDRds attribute is the maximum downstream net data rate calculated from NEXT |
| // downstream SNR(f) (see clause 7.5.1.28.3.2 of [ITUT G.997.1]). The rate is coded in bits per |
| // second. (R) (mandatory) (4-bytes) |
| // |
| // Fext Upstream Maximum Attainable Data Rate |
| // The FEXT ATTNDRus attribute is the maximum upstream net data rate calculated from FEXT upstream |
| // SNR(f) (see clause 7.5.1.28.6.1 of [ITUT G.997.1]). The rate is coded in bits per second. (R) |
| // (mandatory) (4-bytes) |
| // |
| // Next Upstream Maximum Attainable Data Rate |
| // The NEXT ATTNDRus attribute is the maximum upstream net data rate calculated from NEXT upstream |
| // SNR(f) (see clause 7.5.1.28.6.2 of [ITUT G.997.1]). The rate is coded in bits per second. (R) |
| // (mandatory) (4-bytes) |
| // |
| // Fext Downstream Actual Power Spectral Density |
| // The FEXT ACTPSDds attribute is the average downstream transmit PSD over the used subcarriers |
| // (see clause-7.5.1.21.1 of [ITUT G.997.1]) calculated from the REFPSDds and RMSGIds for FEXTR |
| // duration. The attribute value ranges from 0 (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special |
| // value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Next Downstream Actual Power Spectral Density |
| // The NEXT ACTPSDds attribute is the average downstream transmit PSD over the used subcarriers |
| // (see clause-7.5.1.21.2 of [ITUT G.997.1]) calculated from the REFPSDds and RMSGIds for NEXTR |
| // duration. The attribute value ranges from 0 (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special |
| // value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Fext Upstream Actual Power Spectral Density |
| // The FEXT ACTPSDus attribute is the average upstream transmit PSD over the used subcarriers (see |
| // clause-7.5.1.22.1 of [ITUT G.997.1]) calculated from the REFPSDus and RMSGIus for FEXTC |
| // duration. The attribute value ranges from 0 (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special |
| // value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Next Upstream Actual Power Spectral Density |
| // The NEXT ACTPSDus attribute is the average upstream transmit PSD over the used subcarriers (see |
| // clause-7.5.1.22.2 of [ITUT G.997.1]) calculated from the REFPSDus and RMSGIus for NEXTC |
| // duration. The attribute value ranges from 0 (-90.0-dBm/Hz) to 900 (0.0-dBm/Hz). The special |
| // value 0xFFFF indicates that the parameter is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Fext Downstream Actual Aggregate Transmit Power |
| // The FEXT ACTATPds attribute is the total amount of transmit power (see clause 7.5.1.24.1 of |
| // [ITUT G.997.1]) calculated from PSDds measured during FEXTR duration at the ATU-R. The attribute |
| // value ranges from 0 (-31.0-dBm) to 620 (+31.0-dBm). The special value 0xFFFF indicates that the |
| // parameter is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Next Downstream Actual Aggregate Transmit Power |
| // The NEXT ACTATPds attribute is the total amount of transmit power (see clause 7.5.1.24.2 of |
| // [ITUT G.997.1]) calculated from PSDds measured during NEXTR duration at the ATU-R. The attribute |
| // value ranges from 0 (-31.0-dBm) to 620 (+31.0-dBm). The special value 0xFFFF indicates that the |
| // parameter is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Fext Upstream Actual Aggregate Transmit Power |
| // The FEXT ACTATPus attribute is the total transmit power (see clause 7.5.1.25.1 of [ITUT |
| // G.997.1]) calculated from PSDus measured during FEXTC duration at the ATU-C. The attribute value |
| // ranges from 0 (-31.0-dBm) to 620 (+31.0-dBm). The special value 0xFFFF indicates that the |
| // parameter is out of range. (R) (mandatory) (2-bytes) |
| // |
| // Next Upstream Actual Aggregate Transmit Power |
| // The NEXT ACTATPus attribute is the total transmit power (see clause 7.5.1.25.2 of [ITUT |
| // G.997.1]) calculated from PSDus measured during NEXTC duration at the ATU-C. The attribute value |
| // ranges from 0 (-31.0-dBm) to 620 (+31.0-dBm). The special value 0xFFFF indicates that the |
| // parameter is out of range. (R) (mandatory) (2-bytes) |
| // |
| type XdslLineInventoryAndStatusDataPart5 struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| xdsllineinventoryandstatusdatapart5BME = &ManagedEntityDefinition{ |
| Name: "XdslLineInventoryAndStatusDataPart5", |
| ClassID: 325, |
| MessageTypes: mapset.NewSetWith( |
| Get, |
| ), |
| AllowedAttributeMask: 0xffff, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0), |
| 1: Uint16Field("FextDownstreamSnrMargin", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1), |
| 2: Uint16Field("NextDownstreamSnrMargin", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2), |
| 3: Uint16Field("FextUpstreamSnrMargin", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3), |
| 4: Uint16Field("NextUpstreamSnrMargin", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4), |
| 5: Uint32Field("FextDownstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5), |
| 6: Uint32Field("NextDownstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6), |
| 7: Uint32Field("FextUpstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7), |
| 8: Uint32Field("NextUpstreamMaximumAttainableDataRate", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8), |
| 9: Uint16Field("FextDownstreamActualPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9), |
| 10: Uint16Field("NextDownstreamActualPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10), |
| 11: Uint16Field("FextUpstreamActualPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11), |
| 12: Uint16Field("NextUpstreamActualPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12), |
| 13: Uint16Field("FextDownstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13), |
| 14: Uint16Field("NextDownstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14), |
| 15: Uint16Field("FextUpstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, false, false, 15), |
| 16: Uint16Field("NextUpstreamActualAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read), false, false, false, 16), |
| }, |
| Access: CreatedByOnu, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewXdslLineInventoryAndStatusDataPart5 (class ID 325) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewXdslLineInventoryAndStatusDataPart5(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*xdsllineinventoryandstatusdatapart5BME, params...) |
| } |