Import of https://github.com/cboling/omci at commit 7495182a09db38a9b6454a4a457fdd111c1618ac
Change-Id: I3250449080300b21b9d81c64dcc33f98f2e4cd1b
diff --git a/generated/vdsl2lineinventoryandstatusdatapart3.go b/generated/vdsl2lineinventoryandstatusdatapart3.go
new file mode 100644
index 0000000..9ce1dd7
--- /dev/null
+++ b/generated/vdsl2lineinventoryandstatusdatapart3.go
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Vdsl2LineInventoryAndStatusDataPart3ClassID is the 16-bit ID for the OMCI
+// Managed entity VDSL2 line inventory and status data part 3
+const Vdsl2LineInventoryAndStatusDataPart3ClassID ClassID = ClassID(170)
+
+var vdsl2lineinventoryandstatusdatapart3BME *ManagedEntityDefinition
+
+// Vdsl2LineInventoryAndStatusDataPart3 (class ID #170)
+// This ME extends the other xDSL line inventory and status data MEs with attributes specific to
+// VDSL2. This ME contains per-band attributes for both directions. These same attributes are
+// defined in the xDSL line inventory and status data part 2 ME, but only for a single band. [ITUT
+// G.993.2] allows for VDSL2 to have as many as five bands upstream and as many as five bands
+// downstream.
+//
+// Relationships
+// This is one of the status data MEs associated with an xDSL UNI. It is required only if VDSL2 is
+// supported by the PPTP. The ONU automatically creates or deletes an instance of this ME upon
+// creation or deletion of a PPTP xDSL UNI part 1 that supports these attributes.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R)
+// (mandatory) (2-bytes)
+//
+// Downstream Line Attenuation Per Band
+// Downstream line attenuation per band: The LATNds attribute is defined per usable band. It is the
+// squared magnitude of the channel characteristics function, H(f), averaged over this band, and
+// measured during loop diagnostic mode and initialization. The exact definition is included in the
+// relevant xDSL Recommendation. The upstream line attenuation per band ranges from 0 (0.0-dB) to
+// 1270 (+127.0-dB). The special value 0xFFFF indicates that the line attenuation per band is out
+// of the range to be represented. (R) (mandatory) (3-bands * 2-bytes-=-6-bytes)
+//
+// Upstream Line Attenuation Per Band
+// Upstream line attenuation per band: The LATNus attribute is defined per usable band. It is the
+// squared magnitude of the channel characteristics function H(f) averaged over this band, and
+// measured during loop diagnostic mode and initialization. The exact definition is included in the
+// relevant xDSL Recommendation. The upstream line attenuation per band ranges from 0 (0.0-dB) to
+// 1270 (+127.0-dB). The special value 0xFFFF indicates that line attenuation per band is out of
+// range to be represented. (R) (mandatory) (4-bands * 2-bytes-=-8-bytes)
+//
+// Downstream Signal Attenuation Per Band
+// NOTE 1 - During showtime, only a subset of the subcarriers may be transmitted by the xTU-C, as
+// compared to loop diagnostic mode and initialization. Therefore, the downstream signal
+// attenuation value during showtime may be significantly lower than the downstream signal
+// attenuation value during loop diagnostic mode and initialization.
+//
+// Upstream Signal Attenuation Per Band
+// NOTE 2 - During showtime, only a subset of the subcarriers may be transmitted by the xTU-R, as
+// compared to loop diagnostic mode and initialization. Therefore, the upstream signal attenuation
+// value during showtime may be significantly lower than the upstream signal attenuation value
+// during loop diagnostic mode and initialization.
+//
+// Downstream Snr Margin Per Band
+// Downstream SNR margin per band: The SNRMpbds attribute is defined per usable band. The
+// downstream SNR margin per band is the maximum increase of noise power received at the xTU-R,
+// such that the BER requirements are met for all downstream bearer channels. Each array value
+// ranges from 0 (-64.0-dB) to 1270 (+63.0-dB). The special value 0xFFFF indicates that the
+// attribute is out of range to be represented. (R) (mandatory) (3 bands * 2-bytes-=-6-bytes)
+//
+// Upstream Snr Margin Per Band
+// Upstream SNR margin per band: The SNRMpbus attribute is defined per usable band. The upstream
+// SNR margin per band is the maximum increase of noise power received at the xTU-C, such that the
+// BER requirements are met for all upstream bearer channels. Each array value ranges from 0
+// (-64.0-dB) to 1270 (+63.0-dB). The special value 0xFFFF indicates that the attribute is out of
+// range to be represented. (R) (mandatory) (4 bands * 2-bytes-= 8-bytes)
+//
+type Vdsl2LineInventoryAndStatusDataPart3 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ vdsl2lineinventoryandstatusdatapart3BME = &ManagedEntityDefinition{
+ Name: "Vdsl2LineInventoryAndStatusDataPart3",
+ ClassID: 170,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ ),
+ AllowedAttributeMask: 0xfc00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: MultiByteField("DownstreamLineAttenuationPerBand", OctetsAttributeType, 0x8000, 3, toOctets("AAAA"), mapset.NewSetWith(Read), false, false, false, 1),
+ 2: Uint32Field("UpstreamLineAttenuationPerBand", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+ 3: MultiByteField("DownstreamSignalAttenuationPerBand", OctetsAttributeType, 0x2000, 3, toOctets("AAAA"), mapset.NewSetWith(Read), false, false, false, 3),
+ 4: Uint32Field("UpstreamSignalAttenuationPerBand", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+ 5: MultiByteField("DownstreamSnrMarginPerBand", OctetsAttributeType, 0x0800, 3, toOctets("AAAA"), mapset.NewSetWith(Read), false, false, false, 5),
+ 6: Uint32Field("UpstreamSnrMarginPerBand", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewVdsl2LineInventoryAndStatusDataPart3 (class ID 170) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVdsl2LineInventoryAndStatusDataPart3(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*vdsl2lineinventoryandstatusdatapart3BME, params...)
+}