| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // XdslLineConfigurationProfilePart3ClassID is the 16-bit ID for the OMCI |
| // Managed entity xDSL line configuration profile part 3 |
| const XdslLineConfigurationProfilePart3ClassID ClassID = ClassID(106) |
| |
| var xdsllineconfigurationprofilepart3BME *ManagedEntityDefinition |
| |
| // XdslLineConfigurationProfilePart3 (class ID #106) |
| // The overall xDSL line configuration profile is modelled in several parts, all of which are |
| // associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single |
| // pointer, which refers to the entire set of line configuration profile parts). |
| // |
| // Relationships |
| // An instance of this ME may be associated with zero or more instances of an xDSL UNI. |
| // |
| // Attributes |
| // Managed Entity Id |
| // Managed entity ID: This attribute uniquely identifies each instance of this ME. All xDSL and |
| // VDSL2 line configuration profiles and extensions that pertain to a given PPTP xDSL UNI must |
| // share a common ME ID. (R, setbycreate) (mandatory) (2-bytes) |
| // |
| // Loop Diagnostics Mode Forced Ldsf |
| // Only while the line power management state is L3 can the line be forced into loop diagnostic |
| // mode. When loop diagnostic procedures complete successfully, the ONU resets this attribute to 0. |
| // The line remains in the L3 idle state. The loop diagnostics data are available at least until |
| // the line is forced to the L0 state. As long as loop diagnostic procedures have not completed |
| // successfully, attempts are made to do so, until the loop diagnostic mode is no longer forced on |
| // the line through this configuration parameter. If loop diagnostic procedures cannot be completed |
| // successfully after a vendordiscretionary number of retries or within a vendor-discretionary |
| // timeout, then an initialization failure occurs. (R,-W, setbycreate) (mandatory) (1-byte) |
| // |
| // Automode Cold Start Forced |
| // Automode is defined as the case where multiple operation modes are enabled in xTSE (Table |
| // 9.7.12-1) and where the selection of the operation mode to be used for transmission depends, not |
| // only on the common capabilities of both xTUs (as exchanged in [ITU-T G.994.1]), but also on |
| // achievable data rates under given loop conditions. (R,-W, setbycreate) (mandatory if automode is |
| // supported) (1-byte) |
| // |
| // L2 Atpr |
| // L2ATPR: This parameter specifies the maximum aggregate transmit power reduction that can be |
| // performed in the L2 request (i.e., at the transition of L0 to L2 state) or through a single |
| // power trim in the L2 state. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and |
| // [ITUT-G.992.5]. This attribute ranges from 0 (0-dB) dB to 31 (31-dB). (R, W, setbycreate) |
| // (mandatory) (1 byte) |
| // |
| // L2 Atprt |
| // L2ATPRT: This parameter specifies the total maximum aggregate transmit power reduction (in |
| // decibels) that can be performed in an L2 state. This is the sum of all reductions of L2 requests |
| // (i.e., at transitions from L0 to L2 state) and power trims. This attribute ranges from 0 (0 dB) |
| // dB to 31 (31 dB). (R, W, setbycreate) (mandatory) (1 byte) |
| // |
| // Force Inp Downstream |
| // Force INP downstream: When set to 1, the FORCEINPds attribute forces the framer settings of all |
| // downstream bearer channels to be selected such that the impulse noise protection (INP) computed |
| // according to the formula specified in the relevant Recommendation is greater than or equal to |
| // the minimal INP requirement. The default value 0 disables this function. (R, W) (mandatory for |
| // [ITU-T G.993.2], optional for other Recommendations that support it) (1 byte) |
| // |
| // Force Inp Upstream |
| // Force INP upstream: When set to 1, the FORCEINPus attribute forces the framer settings of all |
| // upstream bearer channels to be selected such that the INP computed according to the formula |
| // specified in the relevant Recommendation is greater than or equal to the minimal INP |
| // requirement. The default value 0 disables this function. (R, W) (mandatory for [ITU-T G.993.2], |
| // optional for other Recommendations that support it) (1 byte) |
| // |
| // Update Request Flag For Near_End Test Parameters |
| // Update request flag for near-end test parameters: The UPDATE-TEST-NE attribute forces an update |
| // of all near-end test parameters that can be updated during showtime in [ITU-T G.993.2]. Update |
| // is triggered by setting this attribute to 1, whereupon the near-end test parameters are expected |
| // to be updated within 10-s, and the ONU should reset the attribute value to 0. The update request |
| // flag is independent of any autonomous update process in the system. The update request attribute |
| // must be prepared to accept another set after a period not to exceed 3-min, a period that starts |
| // when the flag is set via the OMCI or by an autonomous process in the system. (R,-W) (optional) |
| // (1-byte) |
| // |
| // Update Request Flag For Far_End Test Parameters |
| // Update request flag for far-end test parameters: The UPDATE-TEST-FE attribute forces an update |
| // of all far-end test parameters that can be updated during showtime in [ITU-T G.993.2]. Update is |
| // triggered by setting this attribute to 1, whereupon the far-end test parameters are expected to |
| // be updated within 10-s, and the ONU should reset the attribute value to 0. The update request |
| // flag is independent of any autonomous update process in the system. The update request attribute |
| // must be prepared to accept another set after a period not to exceed 3-min, a period that starts |
| // when the flag is set via the OMCI or by an autonomous process in the system. (R,-W) (optional) |
| // (1-byte) |
| // |
| // Inm Inter Arrival Time Offset Upstream |
| // INM inter-arrival time offset upstream: INMIATOus is the inter-arrival time (IAT) offset that |
| // the xTU-C receiver uses to determine in which bin of the IAT histogram the IAT is reported. |
| // Valid values for INMIATO range from 3 to 511 discrete multi-tone (DMT) symbols in steps of 1 DMT |
| // symbol. (R,-W) (optional) (2-bytes) |
| // |
| // Inm Inter_Arrival Time Step Upstream |
| // INM inter-arrival time step upstream: INMIATSus is the IAT step that the xTU-C receiver uses to |
| // determine in which bin of the IAT histogram the IAT is reported. Valid values for INMIATS range |
| // from 0 to 7 in steps of 1. (R,-W) (optional) (1-byte) |
| // |
| // Inm Cluster Continuation Value Upstream |
| // INM cluster continuation value upstream: INMCCus is the cluster continuation value that the |
| // xTU-C receiver uses in the cluster indication process described in the applicable |
| // Recommendation. Valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol. |
| // (R,-W) (optional) (1-byte) |
| // |
| // Inm Equivalent Inp Mode Upstream |
| // INM equivalent INP mode upstream: INM_INPEQ_MODEus is the INM equivalent INP mode that the xTU-C |
| // receiver uses in the computation of the equivalent INP, as defined in the applicable |
| // Recommendation. Valid values for INM_INPEQ_MODE are 0..4. (R,-W) (optional) (1-byte) |
| // |
| // Inm Inter Arrival Time Offset Downstream |
| // INM inter-arrival time offset downstream: INMIATOds is the IAT offset that the xTU-R receiver |
| // uses to determine in which bin of the IAT histogram the IAT is reported. Valid values for |
| // INMIATO range from 3 to 511 DMT symbols in steps of 1 DMT symbol. (R,-W) (optional) (2-bytes) |
| // |
| // Inm Inter_Arrival Time Step Downstream |
| // INM inter-arrival time step downstream: INMIATSds is the IAT step that the xTU-R receiver uses |
| // to determine in which bin of the IAT histogram the IAT is reported. Valid values for INMIATS |
| // range from 0 to 7 in steps of 1. (R,-W) (optional) (1-byte) |
| // |
| // Inm Cluster Continuation Value Downstream |
| // INM cluster continuation value downstream: INMCCds is the cluster continuation value that the |
| // xTU-R receiver uses in the cluster indication process described in the applicable |
| // Recommendation. Valid values for INMCC range from 0 to 64 DMT symbols in steps of 1 DMT symbol. |
| // (R,-W) (optional) (1-byte) |
| // |
| // Inm Equivalent Inp Mode Downstream |
| // INM equivalent INP mode downstream: INM_INPEQ_MODEds is the INM equivalent INP mode that the |
| // xTU-R receiver uses in the computation of the equivalent INP, as defined in the applicable |
| // Recommendation. Valid values for INM_INPEQ_MODE are 0..4. (R,-W) (optional) (1-byte) |
| // |
| type XdslLineConfigurationProfilePart3 struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| xdsllineconfigurationprofilepart3BME = &ManagedEntityDefinition{ |
| Name: "XdslLineConfigurationProfilePart3", |
| ClassID: 106, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xffff, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: ByteField("LoopDiagnosticsModeForcedLdsf", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1), |
| 2: ByteField("AutomodeColdStartForced", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2), |
| 3: ByteField("L2Atpr", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3), |
| 4: ByteField("L2Atprt", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4), |
| 5: ByteField("ForceInpDownstream", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5), |
| 6: ByteField("ForceInpUpstream", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6), |
| 7: ByteField("UpdateRequestFlagForNearEndTestParameters", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), true, true, false, 7), |
| 8: ByteField("UpdateRequestFlagForFarEndTestParameters", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), true, true, false, 8), |
| 9: Uint16Field("InmInterArrivalTimeOffsetUpstream", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9), |
| 10: ByteField("InmInterArrivalTimeStepUpstream", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10), |
| 11: ByteField("InmClusterContinuationValueUpstream", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11), |
| 12: ByteField("InmEquivalentInpModeUpstream", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12), |
| 13: Uint16Field("InmInterArrivalTimeOffsetDownstream", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13), |
| 14: ByteField("InmInterArrivalTimeStepDownstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14), |
| 15: ByteField("InmClusterContinuationValueDownstream", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15), |
| 16: ByteField("InmEquivalentInpModeDownstream", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, Write), false, true, false, 16), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewXdslLineConfigurationProfilePart3 (class ID 106) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewXdslLineConfigurationProfilePart3(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*xdsllineconfigurationprofilepart3BME, params...) |
| } |