| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // PhysicalPathTerminationPointVideoAniClassID is the 16-bit ID for the OMCI |
| // Managed entity Physical path termination point video ANI |
| const PhysicalPathTerminationPointVideoAniClassID = ClassID(90) // 0x005a |
| |
| var physicalpathterminationpointvideoaniBME *ManagedEntityDefinition |
| |
| // PhysicalPathTerminationPointVideoAni (Class ID: #90 / 0x005a) |
| // This ME represents an RF video ANI in the ONU, where physical paths terminate and physical path |
| // level functions are performed. |
| // |
| // The ONU automatically creates an instance of this ME per port as follows. |
| // |
| // o When the ONU has video ANI ports built into its factory configuration. |
| // |
| // o When a cardholder is provisioned to expect a circuit pack of the video ANI type. |
| // |
| // o When a cardholder provisioned for plug-and-play is equipped with a circuit pack of the video |
| // ANI type. Note that the installation of a plug-and-play card may indicate the presence of video |
| // ANI ports via equipment ID as well as its type, and indeed may cause the ONU to instantiate a |
| // port-mapping package that specifies video ANI ports. |
| // |
| // The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to |
| // expect a video ANI circuit pack, nor is it equipped with a video ANI circuit pack. |
| // |
| // Relationships |
| // An instance of this ME is associated with each instance of a real or pre-provisioned video ANI |
| // port. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. This 2-byte number indicates the |
| // physical position of the ANI. The first byte is the slot ID (defined in clause 9.1.5). The |
| // second byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes) |
| // |
| // Administrative State |
| // This attribute locks (1) and unlocks (0) the functions performed by this ME. Administrative |
| // state is further described in clause-A.1.6. (R,-W) (mandatory) (1-byte) |
| // |
| // Operational State |
| // This attribute indicates whether the ME is capable of performing its function. Valid values are |
| // enabled (0) and disabled (1). (R) (optional) (1-byte) |
| // |
| // Arc |
| // See clause A.1.4.3. (R,-W) (optional) (1-byte) |
| // |
| // Arc Interval |
| // See clause A.1.4.3. (R,-W) (optional) (1-byte) |
| // |
| // Frequency Range Low |
| // This attribute indicates the lower of the two possible frequency ranges supported. Different |
| // frequency ranges are indicated by code points: |
| // |
| // 0 No low band |
| // |
| // 1 50..550 MHz |
| // |
| // 2 50..750 MHz |
| // |
| // 3 50..870 MHz |
| // |
| // 4..255 Reserved |
| // |
| // (R) (mandatory) (1-byte) |
| // |
| // Frequency Range High |
| // This attribute indicates the higher of the two frequency ranges supported. Different frequency |
| // ranges are indicated by code points: |
| // |
| // 0 No high band |
| // |
| // 1 550..750 MHz |
| // |
| // 2 550..870 MHz |
| // |
| // 3 950..2050 MHz |
| // |
| // 4 2150..3250 MHz |
| // |
| // 5 950..3250 MHz |
| // |
| // 6..255 Reserved |
| // |
| // (R) (mandatory) (1-byte) |
| // |
| // Signal Capability |
| // 0 No signal level measurement capability |
| // |
| // 1 Total optical power level |
| // |
| // 2 Fixed frequency pilot tone power level |
| // |
| // 3 Total optical power level and fixed frequency pilot tone power level |
| // |
| // 4 Variable frequency pilot tone power level |
| // |
| // 5 Total optical power level and variable frequency pilot tone power level |
| // |
| // 6 Broadband RF power level |
| // |
| // 7 Total optical power level and broadband RF power level |
| // |
| // 8..255 Reserved |
| // |
| // (R) (mandatory) (1-byte) |
| // |
| // This attribute indicates the capability of the ONU to measure the video signal level. |
| // Capabilities are indicated by code points, as follows. |
| // |
| // Optical Signal Level |
| // This attribute is an unsigned integer that returns the current measurement of the total optical |
| // signal level. The unit of this attribute is decibel-microwatt optical. |
| // |
| // o If signal capability-= 0, 2, 4 or 6, this attribute is undefined. |
| // |
| // o If signal capability-=1, 3, 5 or 7, this attribute describes the total optical power that is |
| // generating photocurrent on the receiver. |
| // |
| // (R) (optional) (1-byte) |
| // |
| // Pilot Signal Level |
| // This attribute indicates the current measurement of the pilot signal level or broadband RF |
| // level. The unit of this attribute is decibel-microvolt at the RF video service port. |
| // |
| // o If signal capability-= 0 or 1, then this attribute is undefined. |
| // |
| // o If signal capability-= 2, 3, 4 or 5, this attribute reports the pilot signal level at the |
| // output of the video UNI. |
| // |
| // o If signal capability-= 6 or 7, this attribute reports the total RF power level at the output |
| // of the video UNI. |
| // |
| // (R) (optional) (1-byte) |
| // |
| // Signal Level Min |
| // This attribute indicates the minimum optical RF power per channel that results in a CNR of |
| // 47-dBc for a channel of 4.5 MHz bandwidth at a receive optical power of -5-dBm. The unit of this |
| // attribute is decibel-microwatt optical. (R) (mandatory) (1-byte) |
| // |
| // Signal Level Max |
| // This attribute indicates the maximum optical RF power per channel that results in a CTB of |
| // -57-dBc for an 80-channel ensemble of carriers at a perchannel optical modulation index (OMI) of |
| // 3.5%. The unit of this attribute is decibel-microwatt optical. (R) (mandatory) (1-byte) |
| // |
| // Pilot Frequency |
| // This attribute specifies the frequency of the pilot channel receiver. The unit of this attribute |
| // is hertz. |
| // |
| // o If signal capability-= 0, 1, 6 or 7, this attribute is undefined. |
| // |
| // o If signal capability-= 2 or 3, this attribute is functionally RO. |
| // |
| // o If signal capability-= 4 or 5, this attribute is RW. |
| // |
| // (R,-W) (optional) (4-bytes) |
| // |
| // Agc Mode |
| // This attribute allows the discovery and configuration of the ONU's AGC capabilities. The |
| // attribute contains a code point for several AGC types. The ONU displays the currently used AGC |
| // mode. The OLT can discover new modes via the set command; the ONU denies attempts to set an |
| // unsupported mode. The code points are as follows. |
| // |
| // 0 No AGC |
| // |
| // 1 Broadband RF AGC |
| // |
| // 2 Optical AGC |
| // |
| // 3..255 Reserved |
| // |
| // (R,-W) (optional) (1-byte) |
| // |
| // Agc Setting |
| // This attribute indicates the measurement offset that the ONU should use in AGC. The attribute |
| // has a step size of 0.1-dB, represented as a signed integer. |
| // |
| // The theoretical nominal RF signal is 80 channels of NTSC video, each with a per-channel OMI of |
| // 3.5%. An ONU presented with such a signal should produce its specified output when this |
| // attribute is set to zero. |
| // |
| // If total optical power is used for AGC, this attribute provides the OMI offset for any NTSC |
| // carriers present from the theoretical 3.5% value. For example, if the actual signal uses an OMI |
| // of 7.0% per channel (3-dB higher), then the ONU should be given an AGC setting of 30 (coded |
| // 0x1E). |
| // |
| // If broadband RF power is used for AGC, this attribute provides the total power offset for any |
| // NTSC carriers present from the theoretical 80-channel value. For example, if an actual signal |
| // contains 40 NTSC channels (3-dB lower), then the ONU should be given an AGC setting of -30 |
| // (coded 0xE2). |
| // |
| // (R,-W) (optional) (1-byte) |
| // |
| // Video Lower Optical Threshold |
| // This attribute specifies the optical level used to declare the video OOR low alarm. Valid values |
| // are -12 to +6-dBm in 0.1-dB increments, represented as a 2s complement integer. (Coding -120 to |
| // +60, where 0x00-= 0-dBm, 0x88-= -12.0 dBm, etc.) Upon ME instantiation, the ONU sets this |
| // attribute to 0xA1 (-9.5-dBm). (R,-W) (optional) (1-byte) |
| // |
| // NOTE - Because the power measurement returned in the optical signal level attribute has a |
| // resolution of 1-dB, it is possible that the measured value could appear to be in-range, even |
| // though an out-of-range alarm has been declared against a threshold with 0.1-dB resolution. |
| // |
| // Video Upper Optical Threshold |
| // This attribute specifies the optical level used to declare the video OOR high alarm. Valid |
| // values are -12 to +6-dBm in 0.1-dB increments, represented as a 2s complement integer. (Coding |
| // -120 to +60, 0x00-= 0-dBm, 0x88-= -12.0-dBm, etc.) Upon ME instantiation, the ONU sets this |
| // attribute to 0x19 (+2.5-dBm). (R,-W) (optional) (1-byte) |
| // |
| type PhysicalPathTerminationPointVideoAni struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| // Attribute name constants |
| |
| const PhysicalPathTerminationPointVideoAni_AdministrativeState = "AdministrativeState" |
| const PhysicalPathTerminationPointVideoAni_OperationalState = "OperationalState" |
| const PhysicalPathTerminationPointVideoAni_Arc = "Arc" |
| const PhysicalPathTerminationPointVideoAni_ArcInterval = "ArcInterval" |
| const PhysicalPathTerminationPointVideoAni_FrequencyRangeLow = "FrequencyRangeLow" |
| const PhysicalPathTerminationPointVideoAni_FrequencyRangeHigh = "FrequencyRangeHigh" |
| const PhysicalPathTerminationPointVideoAni_SignalCapability = "SignalCapability" |
| const PhysicalPathTerminationPointVideoAni_OpticalSignalLevel = "OpticalSignalLevel" |
| const PhysicalPathTerminationPointVideoAni_PilotSignalLevel = "PilotSignalLevel" |
| const PhysicalPathTerminationPointVideoAni_SignalLevelMin = "SignalLevelMin" |
| const PhysicalPathTerminationPointVideoAni_SignalLevelMax = "SignalLevelMax" |
| const PhysicalPathTerminationPointVideoAni_PilotFrequency = "PilotFrequency" |
| const PhysicalPathTerminationPointVideoAni_AgcMode = "AgcMode" |
| const PhysicalPathTerminationPointVideoAni_AgcSetting = "AgcSetting" |
| const PhysicalPathTerminationPointVideoAni_VideoLowerOpticalThreshold = "VideoLowerOpticalThreshold" |
| const PhysicalPathTerminationPointVideoAni_VideoUpperOpticalThreshold = "VideoUpperOpticalThreshold" |
| |
| func init() { |
| physicalpathterminationpointvideoaniBME = &ManagedEntityDefinition{ |
| Name: "PhysicalPathTerminationPointVideoAni", |
| ClassID: PhysicalPathTerminationPointVideoAniClassID, |
| MessageTypes: mapset.NewSetWith( |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xffff, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0), |
| 1: ByteField(PhysicalPathTerminationPointVideoAni_AdministrativeState, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1), |
| 2: ByteField(PhysicalPathTerminationPointVideoAni_OperationalState, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), true, true, false, 2), |
| 3: ByteField(PhysicalPathTerminationPointVideoAni_Arc, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), true, true, false, 3), |
| 4: ByteField(PhysicalPathTerminationPointVideoAni_ArcInterval, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4), |
| 5: ByteField(PhysicalPathTerminationPointVideoAni_FrequencyRangeLow, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5), |
| 6: ByteField(PhysicalPathTerminationPointVideoAni_FrequencyRangeHigh, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6), |
| 7: ByteField(PhysicalPathTerminationPointVideoAni_SignalCapability, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7), |
| 8: ByteField(PhysicalPathTerminationPointVideoAni_OpticalSignalLevel, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, true, false, 8), |
| 9: ByteField(PhysicalPathTerminationPointVideoAni_PilotSignalLevel, UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, true, false, 9), |
| 10: ByteField(PhysicalPathTerminationPointVideoAni_SignalLevelMin, UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10), |
| 11: ByteField(PhysicalPathTerminationPointVideoAni_SignalLevelMax, UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, false, false, 11), |
| 12: Uint32Field(PhysicalPathTerminationPointVideoAni_PilotFrequency, UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12), |
| 13: ByteField(PhysicalPathTerminationPointVideoAni_AgcMode, UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13), |
| 14: ByteField(PhysicalPathTerminationPointVideoAni_AgcSetting, UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, Write), false, true, false, 14), |
| 15: ByteField(PhysicalPathTerminationPointVideoAni_VideoLowerOpticalThreshold, UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, Write), false, true, false, 15), |
| 16: ByteField(PhysicalPathTerminationPointVideoAni_VideoUpperOpticalThreshold, UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, Write), false, true, false, 16), |
| }, |
| Access: CreatedByOnu, |
| Support: UnknownSupport, |
| Alarms: AlarmMap{ |
| 0: "Video LOS", |
| 1: "Video OOR low", |
| 2: "Video OOR high", |
| }, |
| } |
| } |
| |
| // NewPhysicalPathTerminationPointVideoAni (class ID 90) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewPhysicalPathTerminationPointVideoAni(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*physicalpathterminationpointvideoaniBME, params...) |
| } |