| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // PhysicalPathTerminationPointXdslUniPart1ClassID is the 16-bit ID for the OMCI |
| // Managed entity Physical path termination point xDSL UNI part 1 |
| const PhysicalPathTerminationPointXdslUniPart1ClassID = ClassID(98) // 0x0062 |
| |
| var physicalpathterminationpointxdslunipart1BME *ManagedEntityDefinition |
| |
| // PhysicalPathTerminationPointXdslUniPart1 (Class ID: #98 / 0x0062) |
| // This ME represents the point where physical paths terminate on an xDSL CO modem (xTU-C). The |
| // xDSL ME family is used for ADSL VDSL2 and FAST services. A legacy family of VDSL MEs remains |
| // valid for ITUT G.993.1 VDSL, if needed. It is documented in [ITUT G.983.2]. |
| // |
| // The ONU automatically creates an instance of this ME per port: |
| // |
| // o when the ONU has xDSL ports built into its factory configuration; |
| // |
| // o when a cardholder is provisioned to expect a circuit pack of the xDSL type; |
| // |
| // o when a cardholder provisioned for plug-and-play is equipped with a circuit pack of the xDSL |
| // type. Note that the installation of a plug-and-play card may indicate the presence of xDSL ports |
| // via equipment ID as well as its type, and indeed may cause the ONU to instantiate a port-mapping |
| // package that specifies xDSL ports. |
| // |
| // The ONU automatically deletes instances of this ME when a cardholder is neither provisioned to |
| // expect an xDSL circuit pack, nor is it equipped with an xDSL circuit pack. |
| // |
| // Relationships |
| // An instance of this ME is associated with each instance of a real or pre-provisioned xDSL port. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. This 2 byte number indicates the |
| // physical position of the UNI. The six LSBs of the first byte are the slot ID, defined in clause |
| // 9.1.5. The two MSBs indicate the channel number in some of the implicitly linked MEs, and must |
| // be 0 in the PPTP itself. This reduces the possible number of physical slots to 64. The second |
| // byte is the port ID, with the range 1..255. (R) (mandatory) (2-bytes) |
| // |
| // Loopback Configuration |
| // This attribute represents the loopback configuration of this physical interface. |
| // |
| // 0 No loopback |
| // |
| // 1 Loopback2 - a loopback at the ONU towards the OLT. The OLT can execute a physical level |
| // loopback test after loopback2 is set. |
| // |
| // Upon ME instantiation, the ONU sets this attribute to 0. (R,-W) (mandatory) (1-byte) |
| // |
| // Administrative State |
| // This attribute locks (1) and unlocks (0) the functions performed by this ME. Administrative |
| // state is further described in clause A.1.6. (R,-W) (mandatory) (1-byte) |
| // |
| // Operational State |
| // This attribute indicates whether the ME is capable of performing its function. Valid values are |
| // enabled (0) and disabled (1). (R) (optional) (1-byte) |
| // |
| // Xdsl Line Configuration Profile |
| // This attribute points to an instance of the xDSL line configuration profiles (part 1, 2 and 3) |
| // MEs, and if necessary, also to VDSL2 line configuration extensions (1 and 2) MEs, also to |
| // vectoring line configuration extension MEs. Upon ME instantiation, the ONU sets this attribute |
| // to 0, a null pointer. (R,-W) (mandatory) (2-bytes) |
| // |
| // Xdsl Subcarrier Masking Downstream Profile |
| // This attribute points to an instance of the xDSL subcarrier masking downstream profile ME. Upon |
| // ME instantiation, the ONU sets this attribute to 0, a null pointer. (R,-W) (mandatory) (2-bytes) |
| // |
| // Xdsl Subcarrier Masking Upstream Profile |
| // This attribute points to an instance of the xDSL subcarrier masking upstream profile ME. Upon ME |
| // instantiation, the ONU sets this attribute to 0, a null pointer. (R,-W) (mandatory) (2-bytes) |
| // |
| // Xdsl Downstream Power Spectral Density Psd Mask Profile |
| // xDSL downstream power spectral density (PSD) mask profile: This attribute points to an instance |
| // of the xDSL PSD mask profile ME that defines downstream parameters. Upon ME instantiation, the |
| // ONU sets this attribute to 0, a null pointer. (R,-W) (mandatory) (2-bytes) |
| // |
| // Xdsl Downstream Rfi Bands Profile |
| // This attribute points to an instance of the xDSL downstream RFI bands profile ME. Upon ME |
| // instantiation, the ONU sets this attribute to 0, a null pointer. (R,-W) (mandatory) (2-bytes) |
| // |
| // Arc |
| // See clause A.1.4.3. (R,-W) (optional) (1-byte) |
| // |
| // Arc Interval |
| // See clause A.1.4.3. (R,-W) (optional) (1-byte) |
| // |
| // Modem Type |
| // This attribute specifies the modem type. If the hardware cannot support the requested modem |
| // type, the ONU should deny the provisioning command. For backward compatibility, the attribute is |
| // optional, with a default of ATM. |
| // |
| // 0 undefined |
| // |
| // 1 ATM (default) |
| // |
| // 2 PTM (Ethernet) |
| // |
| // (R,-W) (optional) (1-byte) |
| // |
| // NOTE - Many newer VDSL2 chip sets support only PTM. The ATM default is retained for backward |
| // compatibility, but implementers should be aware that the default may need to be overridden by |
| // provisioning before the xDSL UNI can be brought into service. |
| // |
| // Upstream Psd Mask Profile |
| // This attribute points to an instance of the xDSL PSD mask profile that defines upstream |
| // parameters. Upon ME instantiation, the ONU sets this attribute to 0, a null pointer. (R,-W) |
| // (optional) (2-bytes) |
| // |
| // Network Specific Extensions Pointer |
| // This attribute points to a network address ME that contains the path and name of a file |
| // containing network specific parameters for the associated UNI. Upon ME instantiation, the ONU |
| // sets this attribute to 0xFFFF, a null pointer. (R,-W) (optional) (2-bytes) |
| // |
| type PhysicalPathTerminationPointXdslUniPart1 struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| // Attribute name constants |
| |
| const PhysicalPathTerminationPointXdslUniPart1_LoopbackConfiguration = "LoopbackConfiguration" |
| const PhysicalPathTerminationPointXdslUniPart1_AdministrativeState = "AdministrativeState" |
| const PhysicalPathTerminationPointXdslUniPart1_OperationalState = "OperationalState" |
| const PhysicalPathTerminationPointXdslUniPart1_XdslLineConfigurationProfile = "XdslLineConfigurationProfile" |
| const PhysicalPathTerminationPointXdslUniPart1_XdslSubcarrierMaskingDownstreamProfile = "XdslSubcarrierMaskingDownstreamProfile" |
| const PhysicalPathTerminationPointXdslUniPart1_XdslSubcarrierMaskingUpstreamProfile = "XdslSubcarrierMaskingUpstreamProfile" |
| const PhysicalPathTerminationPointXdslUniPart1_XdslDownstreamPowerSpectralDensityPsdMaskProfile = "XdslDownstreamPowerSpectralDensityPsdMaskProfile" |
| const PhysicalPathTerminationPointXdslUniPart1_XdslDownstreamRfiBandsProfile = "XdslDownstreamRfiBandsProfile" |
| const PhysicalPathTerminationPointXdslUniPart1_Arc = "Arc" |
| const PhysicalPathTerminationPointXdslUniPart1_ArcInterval = "ArcInterval" |
| const PhysicalPathTerminationPointXdslUniPart1_ModemType = "ModemType" |
| const PhysicalPathTerminationPointXdslUniPart1_UpstreamPsdMaskProfile = "UpstreamPsdMaskProfile" |
| const PhysicalPathTerminationPointXdslUniPart1_NetworkSpecificExtensionsPointer = "NetworkSpecificExtensionsPointer" |
| |
| func init() { |
| physicalpathterminationpointxdslunipart1BME = &ManagedEntityDefinition{ |
| Name: "PhysicalPathTerminationPointXdslUniPart1", |
| ClassID: PhysicalPathTerminationPointXdslUniPart1ClassID, |
| MessageTypes: mapset.NewSetWith( |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xfff8, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0), |
| 1: ByteField(PhysicalPathTerminationPointXdslUniPart1_LoopbackConfiguration, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1), |
| 2: ByteField(PhysicalPathTerminationPointXdslUniPart1_AdministrativeState, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2), |
| 3: ByteField(PhysicalPathTerminationPointXdslUniPart1_OperationalState, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), true, true, false, 3), |
| 4: Uint16Field(PhysicalPathTerminationPointXdslUniPart1_XdslLineConfigurationProfile, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4), |
| 5: Uint16Field(PhysicalPathTerminationPointXdslUniPart1_XdslSubcarrierMaskingDownstreamProfile, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5), |
| 6: Uint16Field(PhysicalPathTerminationPointXdslUniPart1_XdslSubcarrierMaskingUpstreamProfile, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6), |
| 7: Uint16Field(PhysicalPathTerminationPointXdslUniPart1_XdslDownstreamPowerSpectralDensityPsdMaskProfile, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7), |
| 8: Uint16Field(PhysicalPathTerminationPointXdslUniPart1_XdslDownstreamRfiBandsProfile, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8), |
| 9: ByteField(PhysicalPathTerminationPointXdslUniPart1_Arc, UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), true, true, false, 9), |
| 10: ByteField(PhysicalPathTerminationPointXdslUniPart1_ArcInterval, UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10), |
| 11: ByteField(PhysicalPathTerminationPointXdslUniPart1_ModemType, UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11), |
| 12: Uint16Field(PhysicalPathTerminationPointXdslUniPart1_UpstreamPsdMaskProfile, UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12), |
| 13: Uint16Field(PhysicalPathTerminationPointXdslUniPart1_NetworkSpecificExtensionsPointer, UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, true, false, 13), |
| }, |
| Access: CreatedByOnu, |
| Support: UnknownSupport, |
| Alarms: AlarmMap{ |
| 0: "NE LOF", |
| 1: "NE LOS", |
| 2: "NE LOL", |
| 3: "NE LPR", |
| 4: "Card alm", |
| 5: "FE LOF", |
| 6: "FE LOS", |
| 7: "FE LOL", |
| 8: "FE LPR", |
| 9: "DRT up", |
| 10: "DRT down", |
| 11: "LINIT", |
| 12: "LCD", |
| 13: "NCD", |
| 14: "LCD-FE", |
| 15: "NCD-FE", |
| 16: "File not found", |
| 17: "OOS", |
| 18: "OOS-FE", |
| 19: "LOR", |
| 20: "LOM", |
| 21: "LOR-FE", |
| 22: "LOM-FE", |
| }, |
| } |
| } |
| |
| // NewPhysicalPathTerminationPointXdslUniPart1 (class ID 98) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewPhysicalPathTerminationPointXdslUniPart1(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*physicalpathterminationpointxdslunipart1BME, params...) |
| } |