| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // Vdsl2LineConfigurationExtensions3ClassID is the 16-bit ID for the OMCI |
| // Managed entity VDSL2 line configuration extensions 3 |
| const Vdsl2LineConfigurationExtensions3ClassID = ClassID(410) // 0x019a |
| |
| var vdsl2lineconfigurationextensions3BME *ManagedEntityDefinition |
| |
| // Vdsl2LineConfigurationExtensions3 (Class ID: #410 / 0x019a) |
| // This ME extends the xDSL line configuration MEs. |
| // |
| // An instance of this ME is created and deleted by the OLT. |
| // |
| // Relationships |
| // An instance of this ME may be associated with zero or more instances of an xDSL UNI.//// The overall xDSL line configuration profile is modelled in several parts, all of which are |
| // associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single |
| // pointer, which refers to the entire set of line configuration parts). |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. All xDSL and VDSL2 line |
| // configuration profiles and extensions that pertain to a given PPTP xDSL UNI must share a common |
| // ME ID. (R, setbycreate) (mandatory) (2-bytes) |
| // |
| // Ripolicyds |
| // This attribute indicates which policy shall be applied to determine the triggers for re- |
| // initialization in the downstream direction. A valid range of values is given in clause |
| // 7.3.1.1.12.1 of [ITU-T G.997.1]. (R,-W) (optional) (1-byte) |
| // |
| // Ripolicyus |
| // This attribute indicates which policy shall be applied to determine the triggers for re- |
| // initialization in the upstream direction. A valid range of values is given in clause |
| // 7.3.1.1.12.2 of [ITU-T G.997.1]. (R,-W) (optional) (1-byte) |
| // |
| // Reinit_Time_Thresholdds |
| // This attribute indicates defines the downstream threshold for re-initialization based on SES, to |
| // be used by the VTU receiver when re-initialization policy 1 is used in downstream. A valid range |
| // of values is given in clause 7.3.1.1.13.1 of [ITU-T G.997.1]. (R,-W) (optional) (1-byte) |
| // |
| // Reinit_Time_Thresholdus |
| // This attribute indicates defines the upstream threshold for re-initialization based on SES, to |
| // be used by the VTU receiver when reinitialization policy 1 is used in upstream. A valid range of |
| // values is given in clause 7.3.1.1.13.2 of [ITU-T G.997.1]. (R,-W) (optional) (1-byte) |
| // |
| // Rxrefvnsfus |
| // If SNRM_MODE = 4, this attribute defines the upstream receiver-referred virtual noise scaling |
| // factor. The attribute value ranges from 0 (-64.0-dBm) to 255 (+63.5-dBm) - see clause 7.3.1.7.5 |
| // of [ITU-T G.997.1]. (R,-W) (optional) (1-byte) |
| // |
| // Txrefvnsfds |
| // If SNRM_MODE = 4, this attribute defines the downstream transmitter referred virtual noise |
| // scaling factor. The attribute value ranges from 0 (-64.0-dBm) to 255 (+63.5-dBm) - see clause |
| // 7.3.1.7.6 of [ITU-T G.997.1]. (R,-W) (optional) (1-byte) |
| // |
| // Rtx_Modeds |
| // This attribute controls the mode of operation of [ITU-T G.998.4] retransmission in the |
| // downstream direction. A valid range of values is given in clause 7.3.1.11 of [ITU-T G.997.1]. |
| // (R,-W) (mandatory) (1-byte) |
| // |
| // Rtx_Modeus |
| // This attribute controls the mode of operation of [ITU-T G.998.4] retransmission in the upstream |
| // direction. A valid range of values is given in clause 7.3.1.11 of [ITU-T G.997.1]. (R,-W) |
| // (mandatory) (1-byte) |
| // |
| // Leftr_Thresh |
| // If retransmission is used in a given transmit direction, LEFTR_THRESH specifies the threshold |
| // for declaring a near-end ''leftr'' defect. LEFTR_THRESH is equal to the integer value of this |
| // attribute multiplied by 0.01. Valid values and usage are given in clause 7.3.1.12 of [ITU-T |
| // G.997.1]. (R,-W) (mandatory) (1-byte) |
| // |
| // Maxdelayoctet_Split Parameter Mdosplit |
| // MAXDELAYOCTET-split parameter (MDOSPLIT): This attribute defines the percentage of the |
| // MAXDELAYOCTET_ext if operating in [ITU-T G.998.4] or MAXDELAYOCTET in other cases allocated to |
| // the downstream direction. MDOSPLIT is equal to the integer value of this attribute multiplied by |
| // 1%. Valid values and usage are given in clause 7.3.1.14 of [ITUT-G.997.1]. (R,-W) (optional) |
| // (1-byte) |
| // |
| // Attndr Method Attndr_Method |
| // ATTNDR Method (ATTNDR_METHOD): This attribute specifies the method to be used for the |
| // calculation of the ATTNDR in the downstream and upstream direction. Valid values are given in |
| // clause 7.3.1.15.1 of [ITU-T G.997.1]. (R,-W) (optional) (1-byte) |
| // |
| // Attndr Maxdelayoctet_Split Parameter Attndr_Mdosplit |
| // ATTNDR MAXDELAYOCTET-split parameter (ATTNDR_MDOSPLIT): This attribute defines the percentage of |
| // the MAXDELAYOCTET_ext if operating in [ITU-T G.998.4] or MAXDELAYOCTET in other cases allocated |
| // to the downstream direction to be used in the improved method for calculation of the ATTNDR. The |
| // valid values are identical to the values of the line configuration parameter MDOSPLIT. See |
| // clause 7.3.1.15.2 of [ITUT-G.997.1]. (R,-W) (optional) (1-byte) |
| // |
| type Vdsl2LineConfigurationExtensions3 struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| // Attribute name constants |
| |
| const Vdsl2LineConfigurationExtensions3_Ripolicyds = "Ripolicyds" |
| const Vdsl2LineConfigurationExtensions3_Ripolicyus = "Ripolicyus" |
| const Vdsl2LineConfigurationExtensions3_ReinitTimeThresholdds = "ReinitTimeThresholdds" |
| const Vdsl2LineConfigurationExtensions3_ReinitTimeThresholdus = "ReinitTimeThresholdus" |
| const Vdsl2LineConfigurationExtensions3_Rxrefvnsfus = "Rxrefvnsfus" |
| const Vdsl2LineConfigurationExtensions3_Txrefvnsfds = "Txrefvnsfds" |
| const Vdsl2LineConfigurationExtensions3_RtxModeds = "RtxModeds" |
| const Vdsl2LineConfigurationExtensions3_RtxModeus = "RtxModeus" |
| const Vdsl2LineConfigurationExtensions3_LeftrThresh = "LeftrThresh" |
| const Vdsl2LineConfigurationExtensions3_MaxdelayoctetSplitParameterMdosplit = "MaxdelayoctetSplitParameterMdosplit" |
| const Vdsl2LineConfigurationExtensions3_AttndrMethodAttndrMethod = "AttndrMethodAttndrMethod" |
| const Vdsl2LineConfigurationExtensions3_AttndrMaxdelayoctetSplitParameterAttndrMdosplit = "AttndrMaxdelayoctetSplitParameterAttndrMdosplit" |
| |
| func init() { |
| vdsl2lineconfigurationextensions3BME = &ManagedEntityDefinition{ |
| Name: "Vdsl2LineConfigurationExtensions3", |
| ClassID: Vdsl2LineConfigurationExtensions3ClassID, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xfff0, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field(ManagedEntityID, PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: ByteField(Vdsl2LineConfigurationExtensions3_Ripolicyds, UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, true, false, 1), |
| 2: ByteField(Vdsl2LineConfigurationExtensions3_Ripolicyus, UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, true, false, 2), |
| 3: ByteField(Vdsl2LineConfigurationExtensions3_ReinitTimeThresholdds, UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, true, false, 3), |
| 4: ByteField(Vdsl2LineConfigurationExtensions3_ReinitTimeThresholdus, UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, true, false, 4), |
| 5: ByteField(Vdsl2LineConfigurationExtensions3_Rxrefvnsfus, UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, true, false, 5), |
| 6: ByteField(Vdsl2LineConfigurationExtensions3_Txrefvnsfds, UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, true, false, 6), |
| 7: ByteField(Vdsl2LineConfigurationExtensions3_RtxModeds, UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7), |
| 8: ByteField(Vdsl2LineConfigurationExtensions3_RtxModeus, UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8), |
| 9: ByteField(Vdsl2LineConfigurationExtensions3_LeftrThresh, UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9), |
| 10: ByteField(Vdsl2LineConfigurationExtensions3_MaxdelayoctetSplitParameterMdosplit, UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, true, false, 10), |
| 11: ByteField(Vdsl2LineConfigurationExtensions3_AttndrMethodAttndrMethod, UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, true, false, 11), |
| 12: ByteField(Vdsl2LineConfigurationExtensions3_AttndrMaxdelayoctetSplitParameterAttndrMdosplit, UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, true, false, 12), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewVdsl2LineConfigurationExtensions3 (class ID 410) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewVdsl2LineConfigurationExtensions3(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*vdsl2lineconfigurationextensions3BME, params...) |
| } |