| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // AniGClassID is the 16-bit ID for the OMCI |
| // Managed entity ANI-G |
| const AniGClassID = ClassID(263) // 0x0107 |
| |
| var anigBME *ManagedEntityDefinition |
| |
| // AniG (Class ID: #263 / 0x0107) |
| // This ME organizes data associated with each access network interface supported by a GPON ONU. |
| // The ONU automatically creates one instance of this ME for each PON physical port. |
| // |
| // Relationships |
| // An instance of this ME is associated with each instance of a physical PON interface. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. Its value indicates the physical |
| // position of the PON interface. The first byte is the slot ID, defined in clause 9.1.5. The |
| // second byte is the port ID. (R) (mandatory) (2-bytes) |
| // |
| // Sr Indication |
| // This Boolean attribute indicates the ONU's capability to report queue status for DBA. The value |
| // true means that status reporting is available for all TCONTs that are associated with the ANI. |
| // (R) (mandatory) (1-byte) |
| // |
| // Total TCont Number |
| // This attribute indicates the total number of T-CONTs that can be supported on this ANI. (R) |
| // (mandatory) (2-bytes) |
| // |
| // Gem Block Length |
| // This attribute specifies the queue occupancy reporting granularity for DBA, expressed in bytes. |
| // This attribute is meaningful only in ITUT G.984.x systems. (R, W) (mandatory) (2 bytes) |
| // |
| // In ITU-T G.984 systems, the value set by the OLT is used by all TCONTs on this ANI. Upon ME |
| // instantiation, the ONU sets this attribute to 48. See [ITUT G.984.3] for further details. |
| // |
| // In all other ITU-T PON systems, the unit for queue occupancy reporting is fixed in at 4-bytes by |
| // the respective TC layer specification. |
| // |
| // Piggyback Dba Reporting |
| // This attribute indicates the ONU's piggyback DBA reporting format capabilities. [ITUT G.984.3] |
| // defines two possible piggyback reporting modes. For reporting mode 0, the single field is the |
| // entire report. For reporting mode 1, the DBA report is two fields long. Mode 0 is mandatory for |
| // ITU-T G.984 ONUs that support piggyback DBA reporting; mode 1 is optional. Subsequent PON |
| // specifications allows only one mode, which should be reported in this attribute as code point 0. |
| // |
| // The following coding indicates the ONU's piggyback DBA reporting mode capabilities: |
| // |
| // 0 Mode 0 only |
| // |
| // 1 Modes 0 and 1 |
| // |
| // 2 Deprecated |
| // |
| // 3 Deprecated |
| // |
| // 4 Piggyback DBA reporting not supported |
| // |
| // (R) (mandatory) (1-byte) |
| // |
| // Deprecated |
| // This attribute should be set to 0 by the ONU and ignored by the OLT. (R) (mandatory) (1-byte) |
| // |
| // Signal Fail Threshold |
| // Signal fail (SF) threshold: This attribute specifies the downstream bit error rate (BER) |
| // threshold to detect the SF alarm. When this value is y, the BER threshold is 10-y. Valid values |
| // are 3..8. Upon ME instantiation, the ONU sets this attribute to 5. (R,-W) (mandatory) (1-byte) |
| // |
| // Signal Degrade Threshold |
| // Signal degrade (SD) threshold: This attribute specifies the downstream BER threshold to detect |
| // the SD alarm. When this value is x, the BER threshold for SD is 10-x. Valid values are 4..10. |
| // The SD threshold must be lower than the SF threshold; i.e., x-> y. Upon ME instantiation, the |
| // ONU sets this attribute to 9. (R,-W) (mandatory) (1-byte) |
| // |
| // Arc |
| // See clause A.1.4.3. (R,-W) (optional) (1-byte) |
| // |
| // Arc Interval |
| // See clause A.1.4.3. (R,-W) (optional) (1-byte) |
| // |
| // Optical Signal Level |
| // This attribute reports the current measurement of the total downstream optical signal level. Its |
| // value is a 2s complement integer referred to 1- mW (i.e., 1-dBm), with 0.002 dB granularity. (R) |
| // (optional) (2-bytes) |
| // |
| // Lower Optical Threshold |
| // This attribute specifies the optical level the ONU uses to declare the downstream low received |
| // optical power alarm. Valid values are -127 dBm (coded as 254) to 0 dBm (coded as 0) in 0.5 dB |
| // increments. The default value 0xFF selects the ONU's internal policy. (R,-W) (optional) (1-byte) |
| // |
| // Upper Optical Threshold |
| // This attribute specifies the optical level the ONU uses to declare the downstream high received |
| // optical power alarm. Valid values are -127 dBm (coded as 254) to 0 dBm (coded as 0) in 0.5 dB |
| // increments. The default value 0xFF selects the ONU's internal policy. (R,-W) (optional) (1-byte) |
| // |
| // Onu Response Time |
| // This attribute indicates the ONU's actual response time. This attribute is in the range |
| // 34..36-us. Although this attribute is expressed in nanoseconds, its accuracy is likely to be |
| // more coarse. Furthermore, the value may change from one activation cycle to the next. Valid |
| // values are: |
| // |
| // 0 (Null, function not supported) |
| // |
| // 34000 to 36000 (response time in nanoseconds) |
| // |
| // All other values reserved |
| // |
| // (R) (optional) (2-bytes) |
| // |
| // Transmit Optical Level |
| // This attribute reports the current measurement of mean optical launch power. Its value is a 2s |
| // complement integer referred to 1-mW (i.e., 1-dBm), with 0.002 dB granularity. (R) (optional) |
| // (2-bytes) |
| // |
| // Lower Transmit Power Threshold |
| // This attribute specifies the minimum mean optical launch power that the ONU uses to declare the |
| // low transmit optical power alarm. Its value is a 2s complement integer referred to 1-mW (i.e., |
| // dBm), with 0.5-dB granularity. The default value -63.5 (0x81) selects the ONU's internal policy. |
| // (R,-W) (optional) (1-byte) |
| // |
| // Upper Transmit Power Threshold |
| // This attribute specifies the maximum mean optical launch power that the ONU uses to declare the |
| // high transmit optical power alarm. Its value is a 2s complement integer referred to 1-mW (i.e., |
| // dBm), with 0.5-dB granularity. The default value -63.5 (0x81) selects the ONU's internal policy. |
| // (R,-W) (optional) (1-byte) |
| // |
| type AniG struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| anigBME = &ManagedEntityDefinition{ |
| Name: "AniG", |
| ClassID: 263, |
| MessageTypes: mapset.NewSetWith( |
| Get, |
| Set, |
| Test, |
| ), |
| AllowedAttributeMask: 0xffff, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0), |
| 1: ByteField("SrIndication", EnumerationAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1), |
| 2: Uint16Field("TotalTcontNumber", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2), |
| 3: Uint16Field("GemBlockLength", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3), |
| 4: ByteField("PiggybackDbaReporting", EnumerationAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4), |
| 5: ByteField("Deprecated", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, true, 5), |
| 6: ByteField("SignalFailThreshold", UnsignedIntegerAttributeType, 0x0400, 5, mapset.NewSetWith(Read, Write), false, false, false, 6), |
| 7: ByteField("SignalDegradeThreshold", UnsignedIntegerAttributeType, 0x0200, 9, mapset.NewSetWith(Read, Write), false, false, false, 7), |
| 8: ByteField("Arc", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), true, true, false, 8), |
| 9: ByteField("ArcInterval", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, true, false, 9), |
| 10: Uint16Field("OpticalSignalLevel", SignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, true, false, 10), |
| 11: ByteField("LowerOpticalThreshold", SignedIntegerAttributeType, 0x0020, 255, mapset.NewSetWith(Read, Write), false, true, false, 11), |
| 12: ByteField("UpperOpticalThreshold", SignedIntegerAttributeType, 0x0010, 255, mapset.NewSetWith(Read, Write), false, true, false, 12), |
| 13: Uint16Field("OnuResponseTime", UnsignedIntegerAttributeType, 0x0008, 35000, mapset.NewSetWith(Read), false, true, false, 13), |
| 14: Uint16Field("TransmitOpticalLevel", SignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14), |
| 15: ByteField("LowerTransmitPowerThreshold", SignedIntegerAttributeType, 0x0002, 129, mapset.NewSetWith(Read, Write), false, true, false, 15), |
| 16: ByteField("UpperTransmitPowerThreshold", SignedIntegerAttributeType, 0x0001, 129, mapset.NewSetWith(Read, Write), false, true, false, 16), |
| }, |
| Access: CreatedByOnu, |
| Support: UnknownSupport, |
| Alarms: AlarmMap{ |
| 0: "Low received optical power", |
| 1: "High received optical power", |
| 2: "SF", |
| 3: "SD", |
| 4: "Low transmit optical power", |
| 5: "High transmit optical power", |
| 6: "Laser bias current", |
| }, |
| } |
| } |
| |
| // NewAniG (class ID 263) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewAniG(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*anigBME, params...) |
| } |