| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // Dot1AgMaintenanceAssociationClassID is the 16-bit ID for the OMCI |
| // Managed entity Dot1ag maintenance association |
| const Dot1AgMaintenanceAssociationClassID = ClassID(300) // 0x012c |
| |
| var dot1agmaintenanceassociationBME *ManagedEntityDefinition |
| |
| // Dot1AgMaintenanceAssociation (Class ID: #300 / 0x012c) |
| // This ME models an [IEEE 802.1ag] service defined on a bridge port. An MA is a set of endpoints |
| // on opposite sides of a network, all existing at a defined maintenance level. One of the |
| // endpoints resides on the local ONU; the others are understood to be configured in a consistent |
| // way on external equipment. [ITUT Y.1731] refers to the MA as a maintenance entity group (MEG). |
| // |
| // An MA is created and deleted by the OLT. |
| // |
| // Relationships |
| // Any number of MAs may be associated with a given MD, or may stand on their own without an MD. |
| // One or more MAs may be associated with a MAC bridge or an IEEE 802.1p mapper. An MA exists at |
| // one of eight possible maintenance levels. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies an instance of this ME. The values 0 and 0xFFFF are reserved. |
| // (R, setbycreate) (mandatory) (2-bytes) |
| // |
| // Md Pointer |
| // This pointer specifies the dot1ag maintenance domain with which this MA is associated. A null |
| // pointer specifies that the MA is not associated with an MD. (R,-W, setbycreate) (mandatory) |
| // (2-bytes) |
| // |
| // Short Ma Name Format |
| // This attribute specifies one of several possible formats for the short MA name attribute. Value |
| // 1, the primary VLAN ID, is recommended to be the default. (R,-W, setbycreate) (mandatory) |
| // (1-byte) |
| // |
| // Short MA Name 1 |
| // These two attributes may be regarded as an octet string whose value is the left-justified MA |
| // name. Because the MA name may or may not be a printable character string, an octet string is the |
| // appropriate representation. If the short MA name format specifies a character string, the string |
| // is null-terminated; otherwise, its length is determined by the short MA name format. Note that |
| // binary comparisons of the short MA name are made in other CFM state machines, so blanks, |
| // alphabetic case, etc., are significant. Also, note that the MD name and the MA short name must |
| // be packed (with additional bytes) into 48-byte CFM message headers. (R,-W) (mandatory) (25-bytes |
| // * 2 attributes) |
| // |
| // Short MA Name 2 |
| // These two attributes may be regarded as an octet string whose value is the left-justified MA |
| // name. Because the MA name may or may not be a printable character string, an octet string is the |
| // appropriate representation. If the short MA name format specifies a character string, the string |
| // is null-terminated; otherwise, its length is determined by the short MA name format. Note that |
| // binary comparisons of the short MA name are made in other CFM state machines, so blanks, |
| // alphabetic case, etc., are significant. Also, note that the MD name and the MA short name must |
| // be packed (with additional bytes) into 48-byte CFM message headers. (R,-W) (mandatory) (25-bytes |
| // * 2 attributes) |
| // |
| // Continuity Check Message Ccm Interval |
| // 3: 100 ms |
| // |
| // 4: 1 s |
| // |
| // 5: 10 s |
| // |
| // 6: 1 min |
| // |
| // 7: 10 min |
| // |
| // Short intervals should be used judiciously, as they can interfere with the network's ability to |
| // handle subscriber traffic. The recommended value is 1-s. (R,-W, setbycreate) (mandatory) |
| // (1-byte) |
| // |
| // Continuity check message (CCM) interval: If CCMs are enabled on an MEP, the CCM interval |
| // attribute specifies the rate at which they are generated. The MEP also expects to receive CCMs |
| // from each of the other MEPs in its CC database at this rate. |
| // |
| // 0: CCM transmission disabled |
| // |
| // 1: 3.33 ms |
| // |
| // 2: 10 ms |
| // |
| // Associated Vlans |
| // This attribute is a list of up to 12 VLAN IDs with which this MA is associated. Once a set of |
| // VLANs is defined, the ONU should deny operations to other dot1ag MAs or dot1ag default MD level |
| // entries that conflict with the set membership. The all-zeros value indicates that this MA is not |
| // associated with any VLANs. Assuming that the attribute is not 0, the first entry is understood |
| // to be the primary VLAN. Except forwarded linktrace messages (LTMs), CFM messages emitted by MPs |
| // in this MA are tagged with the primary VLAN ID. (R,-W) (mandatory) (2-bytes/entry * |
| // 12-entries-=-24-bytes) |
| // |
| // Mhf Creation |
| // This attribute determines whether the bridge creates an MHF, under circumstances defined in |
| // clause 22.2.3 of [IEEE 802.1ag]. This attribute is an enumeration with the following values: |
| // |
| // 1 None. No MHFs are created on this bridge for this MA. |
| // |
| // 2 Default (IEEE 802.1ag term). The bridge can create MHFs on this VID on any port through which |
| // the VID can pass. |
| // |
| // 3 Explicit. The bridge can create MHFs on this VID on any port through which the VID can pass, |
| // but only if an MEP exists at some lower maintenance level. |
| // |
| // 4 Defer. This value causes the ONU to use the setting of the parent MD. This is recommended to |
| // be the default value. |
| // |
| // (R,-W, setbycreate) (mandatory) (1-byte) |
| // |
| type Dot1AgMaintenanceAssociation struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| dot1agmaintenanceassociationBME = &ManagedEntityDefinition{ |
| Name: "Dot1AgMaintenanceAssociation", |
| ClassID: 300, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xfe00, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: Uint16Field("MdPointer", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1), |
| 2: ByteField("ShortMaNameFormat", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2), |
| 3: MultiByteField("ShortMaName1", OctetsAttributeType, 0x2000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 3), |
| 4: MultiByteField("ShortMaName2", OctetsAttributeType, 0x1000, 25, toOctets("AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=="), mapset.NewSetWith(Read, Write), false, false, false, 4), |
| 5: ByteField("ContinuityCheckMessageCcmInterval", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5), |
| 6: Uint16Field("AssociatedVlans", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6), |
| 7: ByteField("MhfCreation", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewDot1AgMaintenanceAssociation (class ID 300) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewDot1AgMaintenanceAssociation(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*dot1agmaintenanceassociationBME, params...) |
| } |