| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // GemInterworkingTerminationPointClassID is the 16-bit ID for the OMCI |
| // Managed entity GEM interworking termination point |
| const GemInterworkingTerminationPointClassID = ClassID(266) // 0x010a |
| |
| var geminterworkingterminationpointBME *ManagedEntityDefinition |
| |
| // GemInterworkingTerminationPoint (Class ID: #266 / 0x010a) |
| // An instance of this ME represents a point in the ONU where the IW of a bearer service (usually |
| // Ethernet) to the GEM layer takes place. At this point, GEM packets are generated from the bearer |
| // bit stream (e.g., Ethernet) or the bearer bit stream is reconstructed from GEM packets. |
| // |
| // Instances of this ME are created and deleted by the OLT. |
| // |
| // Relationships |
| // One instance of this ME exists for each transformation of a data stream into GEM frames and vice |
| // versa. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory) |
| // (2-bytes) |
| // |
| // Gem Port Network Ctp Connectivity Pointer |
| // This attribute points to an instance of the GEM port network CTP. (R,-W, setbycreate) |
| // (mandatory) (2-bytes) |
| // |
| // Interworking Option |
| // This attribute identifies the type of non-GEM function that is being interworked. The options |
| // are as follows. |
| // |
| // 0 Circuit-emulated TDM |
| // |
| // 1 MAC bridged LAN |
| // |
| // 2 Reserved |
| // |
| // 3 Reserved |
| // |
| // 4 Video return path |
| // |
| // 5 IEEE 802.1p mapper |
| // |
| // 6 Downstream broadcast |
| // |
| // 7 MPLS PW TDM service |
| // |
| // (R,-W, setbycreate) (mandatory) (1-byte) |
| // |
| // Service Profile Pointer |
| // This attribute points to an instance of a service profile: |
| // |
| // CES service profile if IW option-=-0 |
| // |
| // MAC bridge service profile if IW option-=-1 |
| // |
| // Video return path service profile if IW option-=-4 |
| // |
| // IEEE 802.1p mapper service profile if IW option-=-5 |
| // |
| // Null pointer if IW option-=-6 |
| // |
| // CES service profile if IW option-=-7 |
| // |
| // (R,-W, setbycreate) (mandatory) (2-bytes) |
| // |
| // NOTE - The video return path (VRP) service profile is defined in [ITU-T G.984.4]. |
| // |
| // Interworking Termination Point Pointer |
| // This attribute is used for the CES and IEEE 802.1p mapper service without a MAC bridge. |
| // Depending on the service provided, it points to the associated instance of the following MEs: |
| // |
| // PPTP CES UNI |
| // |
| // Logical N * 64 kbit/s sub-port CTP |
| // |
| // PPTP Ethernet UNI |
| // |
| // In all other GEM services, the relationship between the related service TP and this GEM IW TP is |
| // derived from other ME relations; this attribute is set to a null pointer and not used. (R,-W, |
| // setbycreate) (mandatory) (2-bytes) |
| // |
| // Pptp Counter |
| // This value reports the number of PPTP ME instances associated with this GEM IW TP. (R) |
| // (optional) (1-byte) |
| // |
| // Operational State |
| // This attribute indicates whether the ME is capable of performing its function. Valid values are |
| // enabled (0) and disabled (1). (R) (optional) (1-byte) |
| // |
| // Gal Profile Pointer |
| // 5 GAL Ethernet profile for IEEE 802.1p mapper |
| // |
| // 6 Null pointer |
| // |
| // 7 Null pointer |
| // |
| // (R,-W, setbycreate) (mandatory) (2-bytes) |
| // |
| // This attribute points to an instance of the GAL profile. The relationship between the IW option |
| // and the related GAL profile is as follows. |
| // |
| // Interworking option GAL profile type |
| // |
| // 0 Null pointer |
| // |
| // 1 GAL Ethernet profile |
| // |
| // 3 GAL Ethernet profile for data service |
| // |
| // 4 GAL Ethernet profile for video return path |
| // |
| // Gal Loopback Configuration |
| // This attribute sets the loopback configuration when using GEM mode: |
| // |
| // 0 No loopback |
| // |
| // 1 Loopback of downstream traffic after GAL |
| // |
| // The default value of this attribute is 0. When the IW option is 6 (downstream broadcast), this |
| // attribute is not used. (R,-W) (mandatory) (1-byte) |
| // |
| type GemInterworkingTerminationPoint struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| geminterworkingterminationpointBME = &ManagedEntityDefinition{ |
| Name: "GemInterworkingTerminationPoint", |
| ClassID: 266, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xff00, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: Uint16Field("GemPortNetworkCtpConnectivityPointer", PointerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1), |
| 2: ByteField("InterworkingOption", EnumerationAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2), |
| 3: Uint16Field("ServiceProfilePointer", PointerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3), |
| 4: Uint16Field("InterworkingTerminationPointPointer", PointerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4), |
| 5: ByteField("PptpCounter", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, true, false, 5), |
| 6: ByteField("OperationalState", EnumerationAttributeType, 0x0400, 0, mapset.NewSetWith(Read), true, true, false, 6), |
| 7: Uint16Field("GalProfilePointer", PointerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7), |
| 8: ByteField("GalLoopbackConfiguration", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| Alarms: AlarmMap{ |
| 0: "Deprecated", |
| }, |
| } |
| } |
| |
| // NewGemInterworkingTerminationPoint (class ID 266) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewGemInterworkingTerminationPoint(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*geminterworkingterminationpointBME, params...) |
| } |