| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // TrafficDescriptorClassID is the 16-bit ID for the OMCI |
| // Managed entity Traffic descriptor |
| const TrafficDescriptorClassID = ClassID(280) // 0x0118 |
| |
| var trafficdescriptorBME *ManagedEntityDefinition |
| |
| // TrafficDescriptor (Class ID: #280 / 0x0118) |
| // The traffic descriptor is a profile that allows for traffic management. A priority controlled |
| // ONU can point from a MAC bridge port configuration data ME to a traffic descriptor in order to |
| // implement traffic management (marking, policing). A rate controlled ONU can point to a traffic |
| // descriptor from either a MAC bridge port configuration data ME or a GEM port network CTP to |
| // implement traffic management (marking, shaping). |
| // |
| // Packets are determined to be green, yellow or red as a function of the ingress packet rate and |
| // the settings in this ME. The colour indicates drop precedence (eligibility), subsequently used |
| // by the priority queue ME to drop packets conditionally during congestion conditions. Packet |
| // colour is also used by the optional mode 1 DBA status reporting function described in [ITUT |
| // G.984.3]. Red packets are dropped immediately. Yellow packets are marked as drop eligible, and |
| // green packets are marked as not drop eligible, according to the egress colour marking attribute. |
| // |
| // The algorithm used to determine the colour marking is specified by the meter type attribute. If |
| // [bIETF RFC 4115] is used, then: |
| // |
| // CIR4115-=-CIR |
| // |
| // EIR4115-=-PIR - CIR (EIR: excess information rate) |
| // |
| // CBS4115-=-CBS |
| // |
| // EBS4115-=-PBS - CBS. |
| // |
| // Relationships |
| // This ME is associated with a GEM port network CTP or a MAC bridge port configuration data ME. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. (R, setbycreate) (mandatory) |
| // (2-bytes) |
| // |
| // Cir |
| // This attribute specifies the committed information rate, in bytes per second. The default is 0. |
| // (R,-W, setbycreate) (optional) (4-bytes) |
| // |
| // Pir |
| // This attribute specifies the peak information rate, in bytes per second. The default value 0 |
| // accepts the ONU's factory policy. (R,-W, setbycreate) (optional) (4-bytes) |
| // |
| // Cbs |
| // This attribute specifies the committed burst size, in bytes. The default is 0. (R,-W, |
| // setbycreate) (optional) (4-bytes) |
| // |
| // Pbs |
| // This attribute specifies the peak burst size, in bytes. The default value 0 accepts the ONU's |
| // factory policy. (R,-W, setbycreate) (optional) (4-bytes) |
| // |
| // Colour Mode |
| // This attribute specifies whether the colour marking algorithm considers pre-existing marking on |
| // ingress packets (colour-aware) or ignores it (colour-blind). In colour-aware mode, packets can |
| // only be demoted (from green to yellow or red, or from yellow to red). The default value is 0. |
| // |
| // 0 Colour-blind |
| // |
| // 1 Colour-aware |
| // |
| // (R,-W, setbycreate) (optional) (1-byte) |
| // |
| // Ingress Colour Marking |
| // This attribute is meaningful in colour-aware mode. It identifies how pre-existing drop |
| // precedence is marked on ingress packets. For DEI and PCP marking, a drop eligible indicator is |
| // equivalent to yellow; otherwise, the colour is green. For DSCP AF marking, the lowest drop |
| // precedence is equivalent to green; otherwise, the colour is yellow. The default value is 0. |
| // |
| // 0 No marking (ignore ingress marking) |
| // |
| // 2 DEI [IEEE 802.1ad] |
| // |
| // 3 PCP 8P0D [IEEE 802.1ad] |
| // |
| // 4 PCP 7P1D [IEEE 802.1ad] |
| // |
| // 5 PCP 6P2D [IEEE 802.1ad] |
| // |
| // 6 PCP 5P3D [IEEE 802.1ad] |
| // |
| // 7 DSCP AF class [IETF RFC 2597] |
| // |
| // (R,-W, setbycreate) (optional) (1-byte) |
| // |
| // Egress Colour Marking |
| // 2 DEI [IEEE 802.1ad] |
| // |
| // 3 PCP 8P0D [IEEE 802.1ad] |
| // |
| // 4 PCP 7P1D [IEEE 802.1ad] |
| // |
| // 5 PCP 6P2D [IEEE 802.1ad] |
| // |
| // 6 PCP 5P3D [IEEE 802.1ad] |
| // |
| // 7 DSCP AF class [IETF RFC 2597] |
| // |
| // (R,-W, setbycreate) (optional) (1-byte) |
| // |
| // This attribute specifies how drop precedence is to be marked by the ONU on egress packets. If |
| // set to internal marking only, the externally visible packet contents are not modified, but the |
| // packet is identified in a vendor-specific local way that indicates its colour to the priority |
| // queue ME. It is possible for the egress marking to differ from the ingress marking; for example, |
| // ingress PCP marking could be translated to DEI egress marking. The default value is 0. |
| // |
| // 0 No marking |
| // |
| // 1 Internal marking only |
| // |
| // Meter Type |
| // This attribute specifies the algorithm used to determine the colour of the packet. The default |
| // value is 0. |
| // |
| // 0 Not specified |
| // |
| // 1 [b-IETF RFC 4115] |
| // |
| // 2 [b-IETF RFC 2698] |
| // |
| // (R, setbycreate) (optional) (1-byte) |
| // |
| type TrafficDescriptor struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| trafficdescriptorBME = &ManagedEntityDefinition{ |
| Name: "TrafficDescriptor", |
| ClassID: 280, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xff00, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: Uint32Field("Cir", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 1), |
| 2: Uint32Field("Pir", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2), |
| 3: Uint32Field("Cbs", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3), |
| 4: Uint32Field("Pbs", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4), |
| 5: ByteField("ColourMode", EnumerationAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5), |
| 6: ByteField("IngressColourMarking", EnumerationAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6), |
| 7: ByteField("EgressColourMarking", EnumerationAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7), |
| 8: ByteField("MeterType", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate), false, true, false, 8), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewTrafficDescriptor (class ID 280) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewTrafficDescriptor(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*trafficdescriptorBME, params...) |
| } |