| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // XdslXtuCPerformanceMonitoringHistoryDataClassID is the 16-bit ID for the OMCI |
| // Managed entity xDSL xTU-C performance monitoring history data |
| const XdslXtuCPerformanceMonitoringHistoryDataClassID = ClassID(112) // 0x0070 |
| |
| var xdslxtucperformancemonitoringhistorydataBME *ManagedEntityDefinition |
| |
| // XdslXtuCPerformanceMonitoringHistoryData (Class ID: #112 / 0x0070) |
| // This ME collects PM data on the xTUC to xTUR path as seen from the xTU-C. Instances of this ME |
| // are created and deleted by the OLT. |
| // |
| // For a complete discussion of generic PM architecture, refer to clause I.4. |
| // |
| // Relationships |
| // An instance of this ME is associated with an xDSL UNI. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is |
| // implicitly linked to an instance of the PPTP xDSL UNI part 1. (R, setbycreate) (mandatory) |
| // (2-bytes) |
| // |
| // Interval End Time |
| // This attribute identifies the most recently finished 15-min interval. (R) (mandatory) (1-byte) |
| // |
| // Threshold Data 1_2 Id |
| // Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 and 2 MEs |
| // that contain PM threshold values. (R,-W, setbycreate) (mandatory) (2-bytes) |
| // |
| // Loss Of Frame Seconds |
| // (R) (mandatory) (2-bytes) |
| // |
| // Loss Of Signal Seconds |
| // (R) (mandatory) (2-bytes) |
| // |
| // Loss Of Link Seconds |
| // (R) (mandatory) (2-bytes) |
| // |
| // Loss Of Power Seconds |
| // (R) (mandatory) (2-bytes) |
| // |
| // Errored Seconds Es |
| // Errored seconds (ES): This attribute counts 1-s intervals with one or more CRC8 anomalies summed |
| // over all received bearer channels, or one or more loss of signal (LOS) defects, or one or more |
| // SEF defects, or one or more LPR defects. (R) (mandatory) (2-bytes) |
| // |
| // Severely Errored Seconds |
| // This attribute counts severely errored seconds (SES-L). An SES is declared if, during a 1-s |
| // interval, there were 18 or more CRC8 anomalies in one or more of the received bearer channels, |
| // or one or more LOS defects, or one or more SEF defects, or one or more LPR defects. |
| // |
| // If the relevant Recommendation ([ITUT G.992.3], [ITUT G.992.5] or [ITUT G.993.2]) supports a 1-s |
| // normalized CRC-8 anomaly counter increment, the 1-s SES counter follows this value instead of |
| // counting CRC-8 anomalies directly. |
| // |
| // If a common CRC is applied over multiple bearer channels, then each related CRC-8 anomaly is |
| // counted only once for the whole set of bearer channels over which the CRC is applied. |
| // |
| // (R) (mandatory) (2-bytes) |
| // |
| // Line Initializations |
| // This attribute counts the total number of full initializations attempted on the line, both |
| // successful and failed. (R) (mandatory) (2-bytes) |
| // |
| // Failed Line Initializations |
| // This attribute counts the total number of failed full initializations during the accumulation |
| // period. A failed full initialization occurs when showtime is not reached at the end of the full |
| // initialization procedure. (R) (mandatory) (2-bytes) |
| // |
| // Short Initializations |
| // This attribute counts the total number of fast retrains or short initializations attempted on |
| // the line, successful and failed. Fast retrain is defined in [ITUT G.992.2]. Short initialization |
| // is defined in [ITUT-G.992.3] and [ITUT G.992.4]. (R) (optional) (2-bytes) |
| // |
| // Failed Short Initializations |
| // This attribute counts the total number of failed fast retrains or short initializations during |
| // the accumulation period, e.g., when: |
| // |
| // - a CRC error is detected; |
| // |
| // - a timeout occurs; |
| // |
| // - a fast retrain profile is unknown. |
| // |
| // (R) (optional) (2-bytes) |
| // |
| // Fec Seconds |
| // This attribute counts seconds during which there was an FEC anomaly. (R) (mandatory) (2-bytes) |
| // |
| // Unavailable Seconds |
| // This attribute counts 1-s intervals during which the xDSL UNI is unavailable. The line becomes |
| // unavailable at the onset of 10 contiguous SES-Ls. The 10 SES-Ls are included in unavailable |
| // time. Once unavailable, the line becomes available at the onset of 10-contiguous seconds that |
| // are not severely errored. The 10-s with no SESLs are excluded from unavailable time. Some |
| // attribute counts are inhibited during unavailability - see clause 7.2.7.13 of [ITUT G.997.1]. |
| // (R) (mandatory) (2-bytes) |
| // |
| // Sos Success Count, Near End |
| // The SOS-SUCCESS-NE attribute is a count of the total number of successful SOS procedures |
| // initiated by the near-end xTU on the line during the accumulation period. Successful SOS is |
| // defined in clause-12.1.4 of [ITUT G.993.2]. (R) (optional) (2-bytes) |
| // |
| // Sos Success Count, Far End |
| // The SOS-SUCCESS-FE attribute is a count of the total number of successful SOS procedures |
| // initiated by the far-end xTU on the line during the accumulation period. Successful SOS is |
| // defined in clause 12.1.4 of [ITUT-G.993.2]. (R) (optional) (2-bytes) |
| // |
| type XdslXtuCPerformanceMonitoringHistoryData struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| xdslxtucperformancemonitoringhistorydataBME = &ManagedEntityDefinition{ |
| Name: "XdslXtuCPerformanceMonitoringHistoryData", |
| ClassID: 112, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| GetCurrentData, |
| ), |
| AllowedAttributeMask: 0xffff, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: ByteField("IntervalEndTime", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1), |
| 2: Uint16Field("ThresholdData12Id", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2), |
| 3: Uint16Field("LossOfFrameSeconds", CounterAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3), |
| 4: Uint16Field("LossOfSignalSeconds", CounterAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4), |
| 5: Uint16Field("LossOfLinkSeconds", CounterAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5), |
| 6: Uint16Field("LossOfPowerSeconds", CounterAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6), |
| 7: Uint16Field("ErroredSecondsEs", CounterAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7), |
| 8: Uint16Field("SeverelyErroredSeconds", CounterAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8), |
| 9: Uint16Field("LineInitializations", CounterAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9), |
| 10: Uint16Field("FailedLineInitializations", CounterAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10), |
| 11: Uint16Field("ShortInitializations", CounterAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, true, false, 11), |
| 12: Uint16Field("FailedShortInitializations", CounterAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12), |
| 13: Uint16Field("FecSeconds", CounterAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, false, false, 13), |
| 14: Uint16Field("UnavailableSeconds", CounterAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14), |
| 15: Uint16Field("SosSuccessCount,NearEnd", CounterAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, true, false, 15), |
| 16: Uint16Field("SosSuccessCount,FarEnd", CounterAttributeType, 0x0001, 0, mapset.NewSetWith(Read), false, true, false, 16), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| Alarms: AlarmMap{ |
| 0: "Loss of frame seconds", |
| 1: "Loss of signal seconds", |
| 2: "Loss of link seconds", |
| 3: "Loss of power seconds", |
| 4: "Errored seconds", |
| 5: "Severely errored seconds", |
| 6: "Line initializations", |
| 7: "Failed line initializations", |
| 8: "Short initializations", |
| 9: "Failed short initializations", |
| 10: "FEC seconds", |
| 11: "Unavailable seconds", |
| }, |
| } |
| } |
| |
| // NewXdslXtuCPerformanceMonitoringHistoryData (class ID 112) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewXdslXtuCPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*xdslxtucperformancemonitoringhistorydataBME, params...) |
| } |