| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // XdslChannelConfigurationProfilePart2ClassID is the 16-bit ID for the OMCI |
| // Managed entity xDSL channel configuration profile part 2 |
| const XdslChannelConfigurationProfilePart2ClassID ClassID = ClassID(412) |
| |
| var xdslchannelconfigurationprofilepart2BME *ManagedEntityDefinition |
| |
| // XdslChannelConfigurationProfilePart2 (class ID #412) |
| // This ME contains the channel configuration profile for an xDSL UNI. An instance of this ME is |
| // created and deleted by the OLT. |
| // |
| // NOTE - If [ITUT G.997.1] compatibility is required, bit rates should only be set to integer |
| // multiples of 1000-bits/s. The ONU may reject attempts to set other values for bit rate |
| // attributes. |
| // |
| // Relationships |
| // An instance of this ME may be associated with zero or more instances of the PPTP xDSL UNI part |
| // 1. |
| // |
| // Attributes |
| // Managed Entity Id |
| // Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an |
| // identical ID, this ME is implicitly linked to an instance of the xDSL channel configuration |
| // profile. (R, setbycreate) (mandatory) (2-bytes) |
| // |
| // Minimum Expected Throughput For Retransmission Minetr_Rtx |
| // Minimum expected throughput for retransmission (MINETR_RTX): If retransmission is used in a |
| // given transmit direction, this attribute specifies the minimum expected throughput for the |
| // bearer channel, in bits per second. See clause 7.3.2.1.8 of [ITU-T G.997.1]. (R,-W) (mandatory) |
| // (4-bytes) |
| // |
| // Maximum Expected Throughput For Retransmission Maxetr_Rtx |
| // Maximum expected throughput for retransmission (MAXETR_RTX): If retransmission is used in a |
| // given transmit direction, this parameter specifies the maximum expected throughput for the |
| // bearer channel, in bits per second. See clause 7.3.2.1.9 of [ITU-T G.997.1]. (R,-W) (mandatory) |
| // (4-bytes) |
| // |
| // Maximum Net Data Rate For Retransmission Maxndr_Rtx |
| // Maximum net data rate for retransmission (MAXNDR_RTX): If retransmission is used in a given |
| // transmit direction, this parameter specifies the maximum net data rate for the bearer channel, |
| // in bits per second. See clause 7.3.2.1.10 of [ITUT-G.997.1]. (R,-W) (mandatory) (4-bytes) |
| // |
| // Maximum Delay For Retransmission Delaymax_Rtx |
| // Maximum delay for retransmission (DELAYMAX_RTX): If retransmission is used in a given transmit |
| // direction, this parameter specifies the maximum for the instantaneous delay due to the effect of |
| // retransmission only. This delay is defined as the integer value of this attribute multiplied by |
| // 1-ms. The valid delay values are given in clause 7.3.2.11 of [ITU-T G.997.1]. (R,-W) (mandatory) |
| // (1-bytes) |
| // |
| // Minimum Delay For Retransmission Delaymin_Rtx |
| // Minimum delay for retransmission (DELAYMIN_RTX): If retransmission is used in a given transmit |
| // direction, this parameter specifies the minimum for the instantaneous delay due to the effect of |
| // retransmission only. This delay is defined as the integer value of this attribute multiplied by |
| // 1 ms. The valid delay values are given in clause 7.3.2.12 of [ITU-T G.997.1]. (R,-W) (mandatory) |
| // (1-bytes) |
| // |
| // Minimum Impulse Noise Protection Against Single High Impulse Noise Event Shine For Retransmission Inpmin_Shine_Rtx |
| // Minimum impulse noise protection against single high impulse noise event (SHINE) for |
| // retransmission (INPMIN_SHINE_RTX): If retransmission is used in a given transmit direction, this |
| // parameter specifies the minimum INP against a SHINE for the bearer channel if it is transported |
| // over DMT symbols with a subcarrier spacing of 4.3125-kHz. The valid range of values is given in |
| // clause-7.3.2.13 of [ITU-T G.997.1]. (R,-W) (mandatory) (1-bytes) |
| // |
| // Minimum Impulse Noise Protection Against Shine For Retransmission For Systems Using 8.625 Khz Subcarrier Spacing Inpmin8_Shine_Rtx |
| // Minimum impulse noise protection against SHINE for retransmission for systems using 8.625 kHz |
| // subcarrier spacing (INPMIN8_SHINE_RTX): If retransmission is used in a given transmit direction, |
| // this parameter specifies the minimum INP against SHINE for the bearer channel if it is |
| // transported over DMT symbols with a subcarrier spacing of 8.625-kHz. The valid range of values |
| // is given in clause 7.3.2.14 of [ITUT-G.997.1]. (R,-W) (mandatory) (1-bytes) |
| // |
| // Shineratio_Rtx |
| // SHINERATIO_RTX: If retransmission is used in a given transmit direction, this parameter |
| // specifies the SHINE ratio. This ratio is defined as the integer value of this attribute |
| // multiplied by 0.001. The valid range of values is given in clause-7.3.2.15 of [ITU-T G.997.1]. |
| // (R,-W) (mandatory) (1-bytes) |
| // |
| // Minimum Impulse Noise Protection Against Rein For Retransmission Inpmin_Rein_Rtx |
| // Minimum impulse noise protection against REIN for retransmission (INPMIN_REIN_RTX): If |
| // retransmission is used in a given transmit direction, this parameter specifies the minimum INP |
| // against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier |
| // spacing of 4.3125 kHz. The valid range of values is given in clause-7.3.2.16 of [ITU-T G.997.1]. |
| // (R,-W) (mandatory) (1-bytes) |
| // |
| // Minimum Impulse Noise Protection Against Rein For Retransmission For Systems Using 8.625_Khz Subcarrier Spacing Inpmin8_Rein_Rtx |
| // Minimum impulse noise protection against REIN for retransmission for systems using 8.625-kHz |
| // subcarrier spacing (INPMIN8_REIN_RTX): If retransmission is used in a given transmit direction, |
| // this parameter specifies the minimum INP against REIN for the bearer channel if it is |
| // transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The valid range of values |
| // is given in clause 7.3.2.17 of [ITU-T G.997.1]. (R,-W) (mandatory) (1-bytes) |
| // |
| // Rein Inter_Arrival Time For Retransmission Iat_Rein_Rtx |
| // REIN inter-arrival time for retransmission (IAT_REIN_RTX): If retransmission is used in a given |
| // transmit direction, this parameter specifies the IAT that shall be assumed for REIN protection. |
| // The valid range of values is given in clause 7.3.2.18 of [ITU-T G.997.1]. (R,-W) (mandatory) |
| // (1-bytes) |
| // |
| // Target Net Data Rate Target_Ndr |
| // Target net data rate (TARGET_NDR): If retransmission is not used in a given transmit direction, |
| // this parameter specifies the target net data of the bearer channel, in bits per second. See |
| // clause 7.3.2.19.1 of [ITU-T G.997.1]. (R,-W) (mandatory) (4-bytes) |
| // |
| // Target Expected Throughput For Retransmission Target_Etr |
| // Target expected throughput for retransmission (TARGET_ETR): If retransmission is used in a given |
| // transmit direction, this parameter specifies the target expected throughput for the bearer |
| // channel, in bits per second. See clause 7.3.2.19.2 of [ITUT-G.997.1]. (R,-W) (mandatory) |
| // (4-bytes) |
| // |
| type XdslChannelConfigurationProfilePart2 struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| xdslchannelconfigurationprofilepart2BME = &ManagedEntityDefinition{ |
| Name: "XdslChannelConfigurationProfilePart2", |
| ClassID: 412, |
| MessageTypes: mapset.NewSetWith( |
| Create, |
| Delete, |
| Get, |
| Set, |
| ), |
| AllowedAttributeMask: 0xfff8, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0), |
| 1: Uint32Field("MinimumExpectedThroughputForRetransmissionMinetrRtx", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1), |
| 2: Uint32Field("MaximumExpectedThroughputForRetransmissionMaxetrRtx", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2), |
| 3: Uint32Field("MaximumNetDataRateForRetransmissionMaxndrRtx", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3), |
| 4: ByteField("MaximumDelayForRetransmissionDelaymaxRtx", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4), |
| 5: ByteField("MinimumDelayForRetransmissionDelayminRtx", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5), |
| 6: ByteField("MinimumImpulseNoiseProtectionAgainstSingleHighImpulseNoiseEventShineForRetransmissionInpminShineRtx", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6), |
| 7: ByteField("MinimumImpulseNoiseProtectionAgainstShineForRetransmissionForSystemsUsing8625KhzSubcarrierSpacingInpmin8ShineRtx", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7), |
| 8: ByteField("ShineratioRtx", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8), |
| 9: ByteField("MinimumImpulseNoiseProtectionAgainstReinForRetransmissionInpminReinRtx", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9), |
| 10: ByteField("MinimumImpulseNoiseProtectionAgainstReinForRetransmissionForSystemsUsing8625KhzSubcarrierSpacingInpmin8ReinRtx", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, false, false, 10), |
| 11: ByteField("ReinInterArrivalTimeForRetransmissionIatReinRtx", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11), |
| 12: Uint32Field("TargetNetDataRateTargetNdr", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12), |
| 13: Uint32Field("TargetExpectedThroughputForRetransmissionTargetEtr", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, false, false, 13), |
| }, |
| Access: CreatedByOlt, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewXdslChannelConfigurationProfilePart2 (class ID 412) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewXdslChannelConfigurationProfilePart2(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*xdslchannelconfigurationprofilepart2BME, params...) |
| } |