| /* |
| * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net) |
| * Copyright 2020-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /* |
| * NOTE: This file was generated, manual edits will be overwritten! |
| * |
| * Generated by 'goCodeGenerator.py': |
| * https://github.com/cboling/OMCI-parser/README.md |
| */ |
| |
| package generated |
| |
| import "github.com/deckarep/golang-set" |
| |
| // Vdsl2LineInventoryAndStatusDataPart1ClassID is the 16-bit ID for the OMCI |
| // Managed entity VDSL2 line inventory and status data part 1 |
| const Vdsl2LineInventoryAndStatusDataPart1ClassID = ClassID(168) // 0x00a8 |
| |
| var vdsl2lineinventoryandstatusdatapart1BME *ManagedEntityDefinition |
| |
| // Vdsl2LineInventoryAndStatusDataPart1 (Class ID: #168 / 0x00a8) |
| // This ME extends the xDSL line configuration MEs. The ME name was chosen because its attributes |
| // were initially unique to ITU-T G.993.2 VDSL2. Due to continuing standards development, some |
| // attributes - and therefore this ME - have also become applicable to other Recommendations, |
| // specifically [ITU-T G.992.3] and [ITU-T G.992.5]. |
| // |
| // This ME contains general and downstream attributes. |
| // |
| // Relationships |
| // This is one of the status data MEs associated with an xDSL UNI. It is meaningful if the PPTP |
| // supports [ITU-T G.992.3], [ITU-T G.992.5] or [ITU-T G.993.2]. The ONU automatically creates or |
| // deletes an instance of this ME upon creation and deletion of a PPTP xDSL UNI part 1 that |
| // supports these attributes. |
| // |
| // Attributes |
| // Managed Entity Id |
| // This attribute uniquely identifies each instance of this ME. Through an identical ID, this ME is |
| // implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R) (mandatory) (2-bytes) |
| // |
| // Vdsl2 Transmission System Capability Xtu C |
| // VDSL2 transmission system capability xTUC: This attribute extends the xTU-C transmission system |
| // capability attribute of the xDSL line inventory and status data part 1 to include xTU-C VDSL2 |
| // capabilities. It is defined by bits 57..64 of Table 9.7.12-1. (R) (mandatory) (1-byte) |
| // |
| // Vdsl2 Transmission System |
| // This attribute reports the transmission system in use. It extends the xDSL transmission system |
| // attribute of the xDSL line inventory and status data part 2 ME with a byte that includes VDSL2 |
| // capabilities currently in use. It is defined by bits 57..64 of Table 9.7.12-1. (R) (mandatory) |
| // (1-byte) |
| // |
| // Vdsl2 Profile |
| // This attribute identifies the profile in use. It is a bit map (0 if not allowed, 1 if allowed) |
| // with the following definition: |
| // |
| // Bit Meaning |
| // |
| // 1 (LSB) ITU-T G.993.2 profile 8a |
| // |
| // 2 ITU-T G.993.2 profile 8b |
| // |
| // 3 ITU-T G.993.2 profile 8c |
| // |
| // 4 ITU-T G.993.2 profile 8d |
| // |
| // 5 ITU-T G.993.2 profile 12a |
| // |
| // 6 ITU-T G.993.2 profile 12b |
| // |
| // 7 ITU-T G.993.2 profile 17a |
| // |
| // 8 ITU-T G.993.2 profile 30a |
| // |
| // (R) (mandatory) (1-byte) |
| // |
| // Vdsl2 Limit Psd Mask And Bandplan |
| // This attribute defines the limit PSD mask and band plan in use. It is a bit map as defined by |
| // Table 9.7.6-1. (R) (mandatory) (8-bytes) |
| // |
| // Vdsl2 Us0 Psd Mask |
| // This attribute defines the US0 PSD mask in use. It is a bit map as defined by Table 9.7.62. (R) |
| // (mandatory) (4-bytes) |
| // |
| // Actsnrmodeds |
| // This attribute indicates whether transmitter-referred virtual noise is active on the line in the |
| // downstream direction. |
| // |
| // 1 Virtual noise inactive |
| // |
| // 2 Virtual noise active |
| // |
| // (R) (mandatory) (1-byte) |
| // |
| // The following four attributes have similar definitions. In each case, valid attribute values are |
| // 1, 2, 4, 8. In ADSL applications, the corresponding value is fixed at 1, and therefore need not |
| // be specified. For VDSL2, it is equal to the size of the subcarrier group used to compute these |
| // attributes (see clause-11.4.1 of [ITUT G.993.2]). |
| // |
| // Hlingds |
| // This attribute contains the number of subcarriers per group used to report HLINpsds. (R) |
| // (mandatory) (1-byte) |
| // |
| // Hloggds |
| // This attribute contains the number of subcarriers per group used to report HLOGpsds. (R) |
| // (mandatory) (1-byte) |
| // |
| // Qlngds |
| // This attribute contains the number of subcarriers per group used to report QLNpsds. (R) |
| // (mandatory) (1-byte) |
| // |
| // Snrgds |
| // This attribute contains the number of subcarriers per group used to report SNRpsds. (R) |
| // (mandatory) (1-byte) |
| // |
| // Mrefpsdds Table |
| // The downstream medley reference PSD table contains the set of breakpoints exchanged in the |
| // MREFPSDds fields of the O-PRM message of [ITU-T G.993.2]. |
| // |
| // The format is similar to that specified for the PSD descriptor in [ITUT-G.993.2]. In [ITU-T |
| // G.993.2], the first byte gives the size of the table, each entry of which is 3-bytes. In the |
| // OMCI definition, the first byte is omitted because the size of the table is known from the |
| // response to the get command. |
| // |
| // (R) (mandatory) (3 * N bytes, where N is the number of breakpoints) |
| // |
| // Trellisds |
| // 0 Trellis not used |
| // |
| // 1 Trellis used |
| // |
| // (R) (mandatory for ITU-T G.993.2 VDSL2, optional for others) (1-byte) |
| // |
| // This attribute reports whether trellis coding is in use in the downstream direction. |
| // |
| // Actual Rate Adaptation Mode Downstream |
| // The ACT-RA-MODEds attribute indicates the actual active RA mode in the downstream direction. |
| // |
| // 1 MANUAL |
| // |
| // 2 AT_INIT |
| // |
| // 3 DYNAMIC |
| // |
| // 4 DYNAMIC with SOS ([ITU-T G.993.2] only) |
| // |
| // (R) (optional) (1-byte) |
| // |
| // Actual Impulse Noise Protection Robust Operations Channel Roc Downstream |
| // Actual impulse noise protection robust operations channel (ROC) downstream: The ACTINP-ROC-ds |
| // attribute reports the actual INP of the ROC in the downstream direction expressed in multiples |
| // of T4k. The INP of this attribute is equal to the integer value multiplied by 0.1 symbols. Valid |
| // values and usage are given in clause 7.5.1.34.1 of [ITUT-G.997.1]. (R) (optional) (1-byte) |
| // |
| // Snr Margin Roc Downstream |
| // The SNRM-ROC-ds attribute reports the actual signal-to-noise margin of the ROC in the downstream |
| // direction. Its value ranges from 0 (-64.0-dB) to 1270 (+63.0-dB). The special value 0xFFFF |
| // indicates that the attribute is out of range. (R) (optional) (2-bytes) |
| // |
| type Vdsl2LineInventoryAndStatusDataPart1 struct { |
| ManagedEntityDefinition |
| Attributes AttributeValueMap |
| } |
| |
| func init() { |
| vdsl2lineinventoryandstatusdatapart1BME = &ManagedEntityDefinition{ |
| Name: "Vdsl2LineInventoryAndStatusDataPart1", |
| ClassID: 168, |
| MessageTypes: mapset.NewSetWith( |
| Get, |
| GetNext, |
| ), |
| AllowedAttributeMask: 0xfffe, |
| AttributeDefinitions: AttributeDefinitionMap{ |
| 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0), |
| 1: ByteField("Vdsl2TransmissionSystemCapabilityXtuC", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1), |
| 2: ByteField("Vdsl2TransmissionSystem", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2), |
| 3: ByteField("Vdsl2Profile", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3), |
| 4: Uint64Field("Vdsl2LimitPsdMaskAndBandplan", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4), |
| 5: Uint32Field("Vdsl2Us0PsdMask", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5), |
| 6: ByteField("Actsnrmodeds", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6), |
| 7: ByteField("Hlingds", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7), |
| 8: ByteField("Hloggds", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read), false, false, false, 8), |
| 9: ByteField("Qlngds", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9), |
| 10: ByteField("Snrgds", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10), |
| 11: TableField("MrefpsddsTable", TableAttributeType, 0x0020, TableInfo{nil, 3}, mapset.NewSetWith(Read), false, false, false, 11), |
| 12: ByteField("Trellisds", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, false, false, 12), |
| 13: ByteField("ActualRateAdaptationModeDownstream", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, true, false, 13), |
| 14: ByteField("ActualImpulseNoiseProtectionRobustOperationsChannelRocDownstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14), |
| 15: Uint16Field("SnrMarginRocDownstream", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read), false, true, false, 15), |
| }, |
| Access: CreatedByOnu, |
| Support: UnknownSupport, |
| } |
| } |
| |
| // NewVdsl2LineInventoryAndStatusDataPart1 (class ID 168) creates the basic |
| // Managed Entity definition that is used to validate an ME of this type that |
| // is received from or transmitted to the OMCC. |
| func NewVdsl2LineInventoryAndStatusDataPart1(params ...ParamData) (*ManagedEntity, OmciErrors) { |
| return NewManagedEntity(*vdsl2lineinventoryandstatusdatapart1BME, params...) |
| } |