blob: 19fe01b5c53ff23d265a8c1e2fb6f1502e705faa [file] [log] [blame]
Chip Boling6e27b352020-02-14 09:10:01 -06001/*
2 * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
Andrea Campanella7167ebb2020-02-24 09:56:38 +01003 * Copyright 2020-present Open Networking Foundation
4
Chip Boling6e27b352020-02-14 09:10:01 -06005 * Licensed under the Apache License, Version 2.0 (the "License");
6 * you may not use this file except in compliance with the License.
7 * You may obtain a copy of the License at
Andrea Campanella7167ebb2020-02-24 09:56:38 +01008
Chip Boling6e27b352020-02-14 09:10:01 -06009 * http://www.apache.org/licenses/LICENSE-2.0
Andrea Campanella7167ebb2020-02-24 09:56:38 +010010
Chip Boling6e27b352020-02-14 09:10:01 -060011 * Unless required by applicable law or agreed to in writing, software
12 * distributed under the License is distributed on an "AS IS" BASIS,
13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 * See the License for the specific language governing permissions and
15 * limitations under the License.
16 */
Andrea Campanella7167ebb2020-02-24 09:56:38 +010017 /*
Chip Boling6e27b352020-02-14 09:10:01 -060018 * NOTE: This file was generated, manual edits will be overwritten!
19 *
20 * Generated by 'goCodeGenerator.py':
21 * https://github.com/cboling/OMCI-parser/README.md
22 */
23
24package generated
25
26import "github.com/deckarep/golang-set"
27
28// XdslLineInventoryAndStatusDataPart8ClassID is the 16-bit ID for the OMCI
29// Managed entity xDSL line inventory and status data part 8
30const XdslLineInventoryAndStatusDataPart8ClassID ClassID = ClassID(414)
31
32var xdsllineinventoryandstatusdatapart8BME *ManagedEntityDefinition
33
34// XdslLineInventoryAndStatusDataPart8 (class ID #414)
35// This ME extends the attributes defined in the xDSL line inventory and status data parts-1..4.
36//
37// Relationships
38// This is one of the status data MEs associated with an xDSL UNI. The ONU automatically creates or
39// deletes an instance of this ME upon creation or deletion of a PPTP xDSL UNI part 1 that supports
40// these attributes.
41//
42// Attributes
43// Managed Entity Id
44// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
45// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R)
46// (mandatory) (2-bytes)
47//
48// Retransmission Used Downstream Rtx_Usedds
49// Retransmission used downstream (RTX_USEDds): This parameter specifies whether [ITU-T G.998.4]
50// retransmission is used (i.e., active in showtime) in the downstream transmit direction. The
51// valid range of values is given in clause-7.5.1.38 of [ITU-T G.997.1]. (R) (mandatory) (1 byte)
52//
53// Retransmission Used Upstream Rtx_Usedus
54// Retransmission used upstream (RTX_USEDus): This parameter specifies whether [ITUT G.998.4]
55// retransmission is used (i.e., active in showtime) in the upstream transmit direction. The valid
56// range of values is given in clause 7.5.1.38 of [ITU-T G.997.1]. (R) (mandatory) (1 byte)
57//
58// Date_Time_Stamping Of Near_End Test Parameters Stamp_Test_Ne
59// (R) (optional) (7-bytes)
60//
61// Date_Time_Stamping Of Far_End Test Parameters Stamp_Test_Fe
62// Date/time-stamping of far-end test parameters (STAMP-TEST-FE): This parameter indicates the
63// date/time when the far-end test parameters that can change during showtime were last updated.
64// See clause 7.5.1.36.4 of [ITUT-G.997.1]. The format of this parameter is the same as STAMP-TEST-
65// NE. (R) (optional) (7-bytes)
66//
67// Date_Time_Stamping Of Last Successful Downstream Olr Operation Stamp_Olr_Ds
68// Date/time-stamping of last successful downstream OLR operation (STAMP-OLR-ds): This parameter
69// indicates the date/time of the last successful OLR execution in the downstream direction that
70// has modified the bits or gains. See clause-7.5.1.37.1 of [ITU-T G.997.1]. The format of this
71// parameter is the same as STAMP-TEST-NE. (R) (optional) (7 bytes)
72//
73// Date_Time_Stamping Of Last Successful Upstream Olr Operation Stamp_Olr_Us
74// Date/time-stamping of last successful upstream OLR operation (STAMP-OLR-us): This parameter
75// indicates the date/time of the last successful OLR execution in the upstream direction that has
76// modified the bits or gains. See clause-7.5.1.37.2 of [ITU-T G.997.1]. The format of this
77// parameter is the same as STAMP-TEST-NE. (R) (optional) (7 bytes)
78//
79type XdslLineInventoryAndStatusDataPart8 struct {
80 ManagedEntityDefinition
81 Attributes AttributeValueMap
82}
83
84func init() {
85 xdsllineinventoryandstatusdatapart8BME = &ManagedEntityDefinition{
86 Name: "XdslLineInventoryAndStatusDataPart8",
87 ClassID: 414,
88 MessageTypes: mapset.NewSetWith(
89 Get,
90 ),
91 AllowedAttributeMask: 0xfc00,
92 AttributeDefinitions: AttributeDefinitionMap{
93 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
94 1: ByteField("RetransmissionUsedDownstreamRtxUsedds", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
95 2: ByteField("RetransmissionUsedUpstreamRtxUsedus", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
96 3: MultiByteField("DateTimeStampingOfNearEndTestParametersStampTestNe", OctetsAttributeType, 0x2000, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, true, false, 3),
97 4: MultiByteField("DateTimeStampingOfFarEndTestParametersStampTestFe", OctetsAttributeType, 0x1000, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, true, false, 4),
98 5: MultiByteField("DateTimeStampingOfLastSuccessfulDownstreamOlrOperationStampOlrDs", OctetsAttributeType, 0x0800, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, true, false, 5),
99 6: MultiByteField("DateTimeStampingOfLastSuccessfulUpstreamOlrOperationStampOlrUs", OctetsAttributeType, 0x0400, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, true, false, 6),
100 },
101 Access: CreatedByOnu,
102 Support: UnknownSupport,
103 }
104}
105
106// NewXdslLineInventoryAndStatusDataPart8 (class ID 414) creates the basic
107// Managed Entity definition that is used to validate an ME of this type that
108// is received from or transmitted to the OMCC.
109func NewXdslLineInventoryAndStatusDataPart8(params ...ParamData) (*ManagedEntity, OmciErrors) {
110 return NewManagedEntity(*xdsllineinventoryandstatusdatapart8BME, params...)
111}