blob: 78dd97e8905956742074ae6c7c8f8debca631883 [file] [log] [blame]
/*
* Copyright 2018-present Open Networking Foundation
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
* http://www.apache.org/licenses/LICENSE-2.0
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package core
import (
"context"
"encoding/hex"
"encoding/json"
"errors"
"fmt"
"io"
"io/ioutil"
"os"
"strconv"
"sync"
"syscall"
"time"
"github.com/cenkalti/backoff/v3"
"github.com/opencord/openolt-scale-tester/config"
"github.com/opencord/voltha-lib-go/v3/pkg/db/kvstore"
"github.com/opencord/voltha-lib-go/v3/pkg/log"
"github.com/opencord/voltha-lib-go/v3/pkg/techprofile"
oop "github.com/opencord/voltha-protos/v3/go/openolt"
"google.golang.org/grpc"
"google.golang.org/grpc/codes"
"google.golang.org/grpc/status"
)
const (
ReasonOk = "OK"
TechProfileKVPath = "service/voltha/technology_profiles/%s/%d" // service/voltha/technology_profiles/xgspon/<tech_profile_tableID>
DTWorkFlow = "DT"
)
type OnuDeviceKey struct {
onuID uint32
ponInfID uint32
}
type OpenOltManager struct {
ipPort string
deviceInfo *oop.DeviceInfo
OnuDeviceMap map[OnuDeviceKey]*OnuDevice `json:"onuDeviceMap"`
TechProfile map[uint32]*techprofile.TechProfileIf
clientConn *grpc.ClientConn
openOltClient oop.OpenoltClient
testConfig *config.OpenOltScaleTesterConfig
rsrMgr *OpenOltResourceMgr
lockRsrAlloc sync.RWMutex
}
func init() {
_, _ = log.AddPackage(log.JSON, log.DebugLevel, nil)
}
func NewOpenOltManager(ipPort string) *OpenOltManager {
log.Infow("initialized openolt manager with ipPort", log.Fields{"ipPort": ipPort})
return &OpenOltManager{
ipPort: ipPort,
OnuDeviceMap: make(map[OnuDeviceKey]*OnuDevice),
lockRsrAlloc: sync.RWMutex{},
}
}
func (om *OpenOltManager) readAndLoadTPsToEtcd() {
var byteValue []byte
var err error
// Verify that etcd is up before starting the application.
etcdIpPort := "http://" + om.testConfig.KVStoreHost + ":" + strconv.Itoa(om.testConfig.KVStorePort)
client, err := kvstore.NewEtcdClient(etcdIpPort, 5)
if err != nil || client == nil {
log.Fatal("error-initializing-etcd-client")
return
}
// Load TPs to etcd for each of the specified tech-profiles
for _, tpID := range om.testConfig.TpIDList {
// Below should translate to something like "/app/ATT-64.json"
// The TP file should exist.
tpFilePath := "/app/" + om.testConfig.WorkflowName + "-" + strconv.Itoa(tpID) + ".json"
// Open our jsonFile
jsonFile, err := os.Open(tpFilePath)
// if we os.Open returns an error then handle it
if err != nil {
log.Fatalw("could-not-find-tech-profile", log.Fields{"err": err, "tpFile": tpFilePath})
}
log.Debugw("tp-file-opened-successfully", log.Fields{"tpFile": tpFilePath})
// read our opened json file as a byte array.
if byteValue, err = ioutil.ReadAll(jsonFile); err != nil {
log.Fatalw("could-not-read-tp-file", log.Fields{"err": err, "tpFile": tpFilePath})
}
var tp techprofile.TechProfile
if err = json.Unmarshal(byteValue, &tp); err != nil {
log.Fatalw("could-not-unmarshal-tp", log.Fields{"err": err, "tpFile": tpFilePath})
} else {
log.Infow("tp-read-from-file", log.Fields{"tp": tp, "tpFile": tpFilePath})
}
kvPath := fmt.Sprintf(TechProfileKVPath, om.deviceInfo.Technology, tpID)
tpJson, err := json.Marshal(tp)
err = client.Put(context.Background(), kvPath, tpJson)
if err != nil {
log.Fatalw("tp-put-to-etcd-failed", log.Fields{"tpPath": kvPath, "err": err})
}
// verify the PUT succeeded.
kvResult, err := client.Get(context.Background(), kvPath)
if kvResult == nil {
log.Fatal("tp-not-found-on-kv-after-load", log.Fields{"key": kvPath, "err": err})
} else {
var KvTpIns techprofile.TechProfile
var resPtr = &KvTpIns
if value, err := kvstore.ToByte(kvResult.Value); err == nil {
if err = json.Unmarshal(value, resPtr); err != nil {
log.Fatal("error-unmarshal-kv-result", log.Fields{"err": err, "key": kvPath, "value": value})
} else {
log.Infow("verified-ok-that-tp-load-was-good", log.Fields{"tpID": tpID, "kvPath": kvPath})
_ = jsonFile.Close()
continue
}
}
}
}
}
func (om *OpenOltManager) Start(testConfig *config.OpenOltScaleTesterConfig) error {
var err error
om.testConfig = testConfig
// Establish gRPC connection with the device
if om.clientConn, err = grpc.Dial(om.ipPort, grpc.WithInsecure(), grpc.WithBlock()); err != nil {
log.Errorw("Failed to dial device", log.Fields{"ipPort": om.ipPort, "err": err})
return err
}
om.openOltClient = oop.NewOpenoltClient(om.clientConn)
// Populate Device Info
if deviceInfo, err := om.populateDeviceInfo(); err != nil {
log.Error("error fetching device info", log.Fields{"err": err, "deviceInfo": deviceInfo})
return err
}
// Read and load TPs to etcd.
om.readAndLoadTPsToEtcd()
log.Info("etcd-up-and-running--tp-loaded-successfully")
if om.rsrMgr = NewResourceMgr("ABCD", om.testConfig.KVStoreHost+":"+strconv.Itoa(om.testConfig.KVStorePort),
"etcd", "openolt", om.deviceInfo); om.rsrMgr == nil {
log.Error("Error while instantiating resource manager")
return errors.New("instantiating resource manager failed")
}
om.TechProfile = make(map[uint32]*techprofile.TechProfileIf)
if err = om.populateTechProfilePerPonPort(); err != nil {
log.Error("Error while populating tech profile mgr\n")
return errors.New("error-loading-tech-profile-per-ponPort")
}
// Start reading indications
go om.readIndications()
// Provision OLT NNI Trap flows as needed by the Workflow
if err = ProvisionNniTrapFlow(om.openOltClient, om.testConfig, om.rsrMgr); err != nil {
log.Error("failed-to-add-nni-trap-flow", log.Fields{"err": err})
}
// Provision ONUs one by one
go om.provisionONUs()
return nil
}
func (om *OpenOltManager) populateDeviceInfo() (*oop.DeviceInfo, error) {
var err error
if om.deviceInfo, err = om.openOltClient.GetDeviceInfo(context.Background(), new(oop.Empty)); err != nil {
log.Errorw("Failed to fetch device info", log.Fields{"err": err})
return nil, err
}
if om.deviceInfo == nil {
log.Errorw("Device info is nil", log.Fields{})
return nil, errors.New("failed to get device info from OLT")
}
log.Debugw("Fetched device info", log.Fields{"deviceInfo": om.deviceInfo})
return om.deviceInfo, nil
}
func (om *OpenOltManager) provisionONUs() {
var numOfONUsPerPon uint
var i, j, onuID uint32
var err error
oltChan := make(chan bool)
numOfONUsPerPon = om.testConfig.NumOfOnu / uint(om.deviceInfo.PonPorts)
if oddONUs := om.testConfig.NumOfOnu % uint(om.deviceInfo.PonPorts); oddONUs > 0 {
log.Warnw("Odd number ONUs left out of provisioning", log.Fields{"oddONUs": oddONUs})
}
totalOnusToProvision := numOfONUsPerPon * uint(om.deviceInfo.PonPorts)
log.Infow("***** all-onu-provision-started ******",
log.Fields{"totalNumOnus": totalOnusToProvision,
"numOfOnusPerPon": numOfONUsPerPon,
"numOfPons": om.deviceInfo.PonPorts})
for i = 0; i < om.deviceInfo.PonPorts; i++ {
for j = 0; j < uint32(numOfONUsPerPon); j++ {
// TODO: More work with ONU provisioning
om.lockRsrAlloc.Lock()
sn := GenerateNextONUSerialNumber()
om.lockRsrAlloc.Unlock()
log.Debugw("provisioning onu", log.Fields{"onuID": j, "ponPort": i, "serialNum": sn})
if onuID, err = om.rsrMgr.GetONUID(i); err != nil {
log.Errorw("error getting onu id", log.Fields{"err": err})
continue
}
log.Infow("onu-provision-started-from-olt-manager", log.Fields{"onuId": onuID, "ponIntf": i})
go om.activateONU(i, onuID, sn, om.stringifySerialNumber(sn), oltChan)
// Wait for complete ONU provision to succeed, including provisioning the subscriber
<-oltChan
log.Infow("onu-provision-completed-from-olt-manager", log.Fields{"onuId": onuID, "ponIntf": i})
// Sleep for configured time before provisioning next ONU
time.Sleep(time.Duration(om.testConfig.TimeIntervalBetweenSubs))
}
}
log.Info("******** all-onu-provisioning-completed *******")
// TODO: We need to dump the results at the end. But below json marshall does not work
// We will need custom Marshal function.
/*
e, err := json.Marshal(om)
if err != nil {
fmt.Println(err)
return
}
fmt.Println(string(e))
*/
// Stop the process once the job is done
_ = syscall.Kill(syscall.Getpid(), syscall.SIGINT)
}
func (om *OpenOltManager) activateONU(intfID uint32, onuID uint32, serialNum *oop.SerialNumber, serialNumber string, oltCh chan bool) {
log.Debugw("activate-onu", log.Fields{"intfID": intfID, "onuID": onuID, "serialNum": serialNum, "serialNumber": serialNumber})
// TODO: need resource manager
var pir uint32 = 1000000
var onuDevice = OnuDevice{
SerialNum: serialNumber,
OnuID: onuID,
PonIntf: intfID,
openOltClient: om.openOltClient,
testConfig: om.testConfig,
rsrMgr: om.rsrMgr,
}
var err error
onuDeviceKey := OnuDeviceKey{onuID: onuID, ponInfID: intfID}
Onu := oop.Onu{IntfId: intfID, OnuId: onuID, SerialNumber: serialNum, Pir: pir}
now := time.Now()
nanos := now.UnixNano()
milliStart := nanos / 1000000
onuDevice.OnuProvisionStartTime = time.Unix(0, nanos)
if _, err = om.openOltClient.ActivateOnu(context.Background(), &Onu); err != nil {
st, _ := status.FromError(err)
if st.Code() == codes.AlreadyExists {
log.Debug("ONU activation is in progress", log.Fields{"SerialNumber": serialNumber})
oltCh <- false
} else {
nanos = now.UnixNano()
milliEnd := nanos / 1000000
onuDevice.OnuProvisionEndTime = time.Unix(0, nanos)
onuDevice.OnuProvisionDurationInMs = milliEnd - milliStart
log.Errorw("activate-onu-failed", log.Fields{"Onu": Onu, "err ": err})
onuDevice.Reason = err.Error()
oltCh <- false
}
} else {
nanos = now.UnixNano()
milliEnd := nanos / 1000000
onuDevice.OnuProvisionEndTime = time.Unix(0, nanos)
onuDevice.OnuProvisionDurationInMs = milliEnd - milliStart
onuDevice.Reason = ReasonOk
log.Infow("activated-onu", log.Fields{"SerialNumber": serialNumber})
}
om.OnuDeviceMap[onuDeviceKey] = &onuDevice
// If ONU activation was success provision the ONU
if err == nil {
// start provisioning the ONU
go om.OnuDeviceMap[onuDeviceKey].Start(oltCh)
}
}
func (om *OpenOltManager) stringifySerialNumber(serialNum *oop.SerialNumber) string {
if serialNum != nil {
return string(serialNum.VendorId) + om.stringifyVendorSpecific(serialNum.VendorSpecific)
}
return ""
}
func (om *OpenOltManager) stringifyVendorSpecific(vendorSpecific []byte) string {
tmp := fmt.Sprintf("%x", (uint32(vendorSpecific[0])>>4)&0x0f) +
fmt.Sprintf("%x", uint32(vendorSpecific[0]&0x0f)) +
fmt.Sprintf("%x", (uint32(vendorSpecific[1])>>4)&0x0f) +
fmt.Sprintf("%x", (uint32(vendorSpecific[1]))&0x0f) +
fmt.Sprintf("%x", (uint32(vendorSpecific[2])>>4)&0x0f) +
fmt.Sprintf("%x", (uint32(vendorSpecific[2]))&0x0f) +
fmt.Sprintf("%x", (uint32(vendorSpecific[3])>>4)&0x0f) +
fmt.Sprintf("%x", (uint32(vendorSpecific[3]))&0x0f)
return tmp
}
// readIndications to read the indications from the OLT device
func (om *OpenOltManager) readIndications() {
defer log.Errorw("Indications ended", log.Fields{})
indications, err := om.openOltClient.EnableIndication(context.Background(), new(oop.Empty))
if err != nil {
log.Errorw("Failed to read indications", log.Fields{"err": err})
return
}
if indications == nil {
log.Errorw("Indications is nil", log.Fields{})
return
}
// Create an exponential backoff around re-enabling indications. The
// maximum elapsed time for the back off is set to 0 so that we will
// continue to retry. The max interval defaults to 1m, but is set
// here for code clarity
indicationBackoff := backoff.NewExponentialBackOff()
indicationBackoff.MaxElapsedTime = 0
indicationBackoff.MaxInterval = 1 * time.Minute
for {
indication, err := indications.Recv()
if err == io.EOF {
log.Infow("EOF for indications", log.Fields{"err": err})
// Use an exponential back off to prevent getting into a tight loop
duration := indicationBackoff.NextBackOff()
if duration == backoff.Stop {
// If we reach a maximum then warn and reset the backoff
// timer and keep attempting.
log.Warnw("Maximum indication backoff reached, resetting backoff timer",
log.Fields{"max_indication_backoff": indicationBackoff.MaxElapsedTime})
indicationBackoff.Reset()
}
time.Sleep(indicationBackoff.NextBackOff())
indications, err = om.openOltClient.EnableIndication(context.Background(), new(oop.Empty))
if err != nil {
log.Errorw("Failed to read indications", log.Fields{"err": err})
return
}
continue
}
if err != nil {
log.Infow("Failed to read from indications", log.Fields{"err": err})
break
}
// Reset backoff if we have a successful receive
indicationBackoff.Reset()
om.handleIndication(indication)
}
}
func (om *OpenOltManager) handleIndication(indication *oop.Indication) {
switch indication.Data.(type) {
case *oop.Indication_OltInd:
log.Info("received olt indication")
case *oop.Indication_IntfInd:
intfInd := indication.GetIntfInd()
log.Infow("Received interface indication ", log.Fields{"InterfaceInd": intfInd})
case *oop.Indication_IntfOperInd:
intfOperInd := indication.GetIntfOperInd()
if intfOperInd.GetType() == "nni" {
log.Info("received interface oper indication for nni port")
} else if intfOperInd.GetType() == "pon" {
log.Info("received interface oper indication for pon port")
}
/*
case *oop.Indication_OnuDiscInd:
onuDiscInd := indication.GetOnuDiscInd()
log.Infow("Received Onu discovery indication ", log.Fields{"OnuDiscInd": onuDiscInd})
*/
case *oop.Indication_OnuInd:
onuInd := indication.GetOnuInd()
log.Infow("Received Onu indication ", log.Fields{"OnuInd": onuInd})
case *oop.Indication_OmciInd:
omciInd := indication.GetOmciInd()
log.Debugw("Received Omci indication ", log.Fields{"IntfId": omciInd.IntfId, "OnuId": omciInd.OnuId, "pkt": hex.EncodeToString(omciInd.Pkt)})
case *oop.Indication_PktInd:
pktInd := indication.GetPktInd()
log.Infow("Received packet indication ", log.Fields{"PktInd": pktInd})
/*
case *oop.Indication_PortStats:
portStats := indication.GetPortStats()
log.Infow("Received port stats", log.Fields{"portStats": portStats})
case *oop.Indication_FlowStats:
flowStats := indication.GetFlowStats()
log.Infow("Received flow stats", log.Fields{"FlowStats": flowStats})
*/
case *oop.Indication_AlarmInd:
alarmInd := indication.GetAlarmInd()
log.Infow("Received alarm indication ", log.Fields{"AlarmInd": alarmInd})
}
}
func (om *OpenOltManager) populateTechProfilePerPonPort() error {
var tpCount int
for _, techRange := range om.deviceInfo.Ranges {
for _, intfID := range techRange.IntfIds {
om.TechProfile[intfID] = &(om.rsrMgr.ResourceMgrs[intfID].TechProfileMgr)
tpCount++
log.Debugw("Init tech profile done", log.Fields{"intfID": intfID})
}
}
//Make sure we have as many tech_profiles as there are pon ports on the device
if tpCount != int(om.deviceInfo.GetPonPorts()) {
log.Errorw("Error while populating techprofile",
log.Fields{"numofTech": tpCount, "numPonPorts": om.deviceInfo.GetPonPorts()})
return errors.New("error while populating techprofile mgrs")
}
log.Infow("Populated techprofile for ponports successfully",
log.Fields{"numofTech": tpCount, "numPonPorts": om.deviceInfo.GetPonPorts()})
return nil
}