| /* |
| * Copyright 2018-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef __VENDOR_H__ |
| #define __VENDOR_H__ |
| #include "device.h" |
| #define VENDOR_ID "EdgeCore" |
| #define ASFVOLT16 |
| #define MODEL_ID "asfvolt16" |
| #define MAX_SUPPORTED_PON 16 |
| #define ONU_BIT_TRANSMISSION_DELAY 0.1004823/1000 /* unit: ns to us */ |
| #define MINIMUM_ONU_RESPONSE_RANGING_TIME 1572135 /* hardcore: this is ranging time for the shortest distance, typically 35us */ |
| #define DEFAULT_MAC_SYSTEM_MODE BCMOLT_SYSTEM_MODE_XGS__2_X |
| #define DEFAULT_PON_MODE BCMOLT_PON_TYPE_XGPON |
| |
| // DeviceInfo definitions |
| |
| #define ONU_ID_START 1 |
| #define ONU_ID_END 32 |
| #define MAX_ONUS_PER_PON (ONU_ID_END - ONU_ID_START + 1) |
| |
| #define MAX_ALLOC_ID_PER_ONU 4 |
| #define ALLOC_ID_START 1024 |
| #define ALLOC_ID_END (ALLOC_ID_START + MAX_ONUS_PER_PON * MAX_ALLOC_ID_PER_ONU) |
| |
| #define GEM_PORT_ID_PER_ALLOC_ID 8 |
| #define GEM_PORT_ID_START 1024 |
| #define GEM_PORT_ID_END (GEM_PORT_ID_START + MAX_ONUS_PER_PON * MAX_ALLOC_ID_PER_ONU * GEM_PORT_ID_PER_ALLOC_ID) |
| |
| #define FLOW_ID_START 1 |
| #define FLOW_ID_END 65535 |
| #define MAX_FLOW_ID FLOW_ID_END |
| #define INVALID_FLOW_ID 0 |
| |
| #define MAC_DEVICE_ACTIVATION_DELAY 2000000 // in microseconds |
| |
| /////////////////////////////////////////////////////// |
| // Constants relevant for decoding PON Trx EEPROM Data |
| |
| // Uncomment below line when you need dynamic transceiver detection support |
| // #define DYNAMIC_PON_TRX_SUPPORT |
| |
| |
| #define TOTAL_PON_TRX_PORTS 16 // total PON transceiver ports |
| #define TOTAL_PON_PORTS 16 // total PON ports (we could have up to 2 PON ports on the OLT MAC mapped to the external PON Trx) |
| const int trx_port_to_pon_port_map[TOTAL_PON_TRX_PORTS][TOTAL_PON_PORTS/TOTAL_PON_TRX_PORTS]={{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10}, |
| {11},{12},{13},{14},{15}}; |
| #define PONS_PER_TRX (TOTAL_PON_TRX_PORTS/TOTAL_PON_PORTS) // if there are more than one OLT MAC device, |
| // they all have to be of the same type for this to work. |
| |
| const int bus_index[TOTAL_PON_TRX_PORTS] = { |
| 47, 48, 37, 38, 35, 36, 33, 34, |
| 39, 40, 41, 42, 43, 44, 45, 46 |
| }; |
| |
| |
| // FIXME: Check the correctness of the below constants for this platform |
| |
| #define PORT_ADDRESS 50 |
| |
| #define NAME_EEPROM "sfp_eeprom" |
| |
| #define EEPROM_VENDOR_NAME_START_IDX 148 |
| #define EEPROM_VENDOR_NAME_LENGTH 16 |
| |
| #define EEPROM_VENDOR_OUI_START_IDX 165 |
| #define EEPROM_VENDOR_OUI_LENGTH 3 |
| |
| #define EEPROM_VENDOR_PART_NUMBER_START_IDX 168 |
| #define EEPROM_VENDOR_PART_NUMBER_LENGTH 16 |
| |
| #define EEPROM_VENDOR_REVISION_START_IDX 184 |
| #define EEPROM_VENDOR_REVISION_LENGTH 2 |
| |
| #define EEPROM_DOWNSTREAM_WAVELENGTH_START_IDX 186 |
| #define EEPROM_DOWNSTREAM_WAVELENGTH_LENGTH 2 |
| #define EEPROM_WAVELENGTH_RESOLUTION 0.05 |
| |
| // Define valid values below in case of Combo PON Trx is supported |
| // #define EEPROM_DOWNSTREAM_SECONDARY_WAVELENGTH_START_IDX 120 |
| // #define EEPROM_DOWNSTREAM_SECONDARY_WAVELENGTH_LENGTH 2 |
| |
| |
| class PonTrx: public PonTrxBase { |
| // override the base member functions if you need a different implementation |
| public: |
| // Get MAC System mode based on the olt mac id and the set of SFP IDs provided |
| pair<bcmolt_system_mode, bool> get_mac_system_mode(int, set<int>); |
| |
| }; |
| |
| #endif |