agent/Makefile.in - openolt - Gitiles

 # Copyright (C) 2018 Open Networking Foundation
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation, either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.

 ########################################################################
 ##
 ##
 ##        Config
 ##
 ##
 TOP_DIR=`pwd`
 OPENOLTDEVICE ?= generic

 #
 # Three vendor proprietary source files are required to build BAL.
 # SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK.
 # sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK.
 # ACCTON_BAL_<BAL_VER>-<DEV_VER>.patch - Accton/Edgecore's patch.
 BAL_MAJOR_VER = 3
 BAL_MINOR_VER = 0
 BAL_REV_A_VER = 3
 BAL_REV_B_VER = 3
 BAL_API_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER)
 BAL_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_REV_B_VER)
 SDK_VER = 6.5.13
 DEV_VER ?= 201904171432
 #
 # Version of Open Network Linux (ONL).
 ONL_KERN_VER_MAJOR = 4.14
 #
 # Build directory
 BUILD_DIR = build
 #
 # GRPC installation
 GRPC_ADDR = https://github.com/grpc/grpc
 GRPC_DST = /tmp/grpc
 GRPC_VER = v1.10.x

 USER := $(shell echo $(USER))
 #
 ########################################################################
 ##
 ##
 ##        Install prerequisites
 ##
 ##
 HOST_SYSTEM = $(shell uname | cut -f 1 -d_)
 SYSTEM ?= $(HOST_SYSTEM)

 LIBGRPC_PATH=$(shell pkg-config --libs-only-L grpc | sed s/-L// | sed s/\ //g)
 LIBPROTOBUF_PATH=$(shell PKG_CONFIG_ALLOW_SYSTEM_LIBS=true pkg-config --libs-only-L protobuf | sed s/-L// | sed s/\ //g)

 CXX = @CXX@
 CXXFLAGS += @CXXFLAGS@
 CXXFLAGS += $(shell pkg-config --cflags-only-I grpc++)
 CPPFLAGS += `pkg-config --cflags protobuf grpc`
 CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix
 LDFLAGS += @LDFLAGS@
 LDFLAGS += `pkg-config --libs protobuf grpc++ grpc` -ldl -lgpr
 CXXFLAGSDEVICE = -I./device -I./device/$(OPENOLTDEVICE) -I./device/generic

 export CXX CXXFLAGS

 prereq:
 	sudo apt-get -q -y install git pkg-config build-essential autoconf libtool libgflags-dev libgtest-dev clang libc++-dev unzip docker.io
 	sudo apt-get install -y build-essential autoconf libssl-dev gawk debhelper dh-systemd init-system-helpers

 	# Install GRPC, libprotobuf and protoc
 	rm -rf $(GRPC_DST)
 	git clone -b $(GRPC_VER) $(GRPC_ADDR) $(GRPC_DST)
 	cd $(GRPC_DST) && git submodule update --init
 	cd $(GRPC_DST)/third_party/protobuf && ./autogen.sh && ./configure
 	make -C $(GRPC_DST)/third_party/protobuf
 	sudo make -C $(GRPC_DST)/third_party/protobuf install
 	sudo ldconfig
 	make -C $(GRPC_DST)
 	sudo make -C $(GRPC_DST) install
 	sudo ldconfig

 docker:
 	echo $(USER)
 	sudo groupadd -f docker
 ifneq "$(USER)" ""
 	sudo usermod -aG docker $(USER)
 endif

 ########################################################################
 ##
 ##
 ##        ONL
 ##
 ##
 ONL_REPO = $(OPENOLTDEVICE)-onl
 ONL_DIR = $(BUILD_DIR)/$(ONL_REPO)
 onl:
 	if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \
 		mkdir -p $(ONL_DIR); \
 		git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux; \
 		cp download/Makefile.onl $(ONL_DIR)/Makefile; \
 		install -m 755 download/build-$(OPENOLTDEVICE).sh $(ONL_DIR)/OpenNetworkLinux; \
 		make -C $(ONL_DIR) $(OPENOLTDEVICE)-$(ONL_KERN_VER_MAJOR); \
 	fi;
 onl-force:
 	make -C $(ONL_DIR) $(OPENOLTDEVICE)-$(ONL_KERN_VER_MAJOR)
 distclean-onl:
 	sudo rm -rf $(ONL_DIR)

 ########################################################################
 ##
 ##
 ##        Broadcom LIBRARY APIs
 ##
 ##
 BAL_API_DIR = $(BUILD_DIR)/bal-api-$(BAL_API_VER)

 bal-api-$(BAL_API_VER):
 	if [ ! -d "$(BAL_API_DIR)" ]; then \
 		mkdir -p $(BAL_API_DIR); \
 		git clone https://github.com/balapi/bal-api-3.0.git $(BAL_API_DIR); \
 	fi;
 bal-api-clean:
 	rm $(BAL_API_DIR)

 ########################################################################
 ##
 ##
 ##        BAL
 ##
 ##
 BAL_ZIP = SW-BCM68620_$(subst .,_,$(BAL_VER)).tgz
 SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
 ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch
 BAL_DIR = $(BUILD_DIR)/$(OPENOLTDEVICE)-bal
 BCM_SDK = $(BAL_DIR)/switch_sdk/$(SDK_VER)
 BALLIBDIR = $(BAL_DIR)/build/host_reference/host_api
 BALLIBNAME = bal_host_api
 BAL_INC = -I$(BAL_DIR)/host_driver/bal/bal_include \
           -I$(BAL_DIR)/host_driver/topology \
           -I$(BAL_DIR)/host_driver/utils \
           -I$(BAL_DIR)/host_driver/api \
           -I$(BAL_DIR)/host_customized/os_abstraction \
           -I$(BAL_DIR)/host_customized/os_abstraction/posix \
           -I$(BAL_DIR)/host_customized/config \
           -I$(BAL_DIR)/host_driver/api_conn_mgr \
           -I$(BAL_DIR)/host_driver/conn_mgr \
           -I$(BAL_DIR)/host_driver/api/host/topology \
           -I$(BAL_DIR)/host_reference/cli \
           -I$(BAL_DIR)/host_reference/api_cli \
           -I$(BAL_API_DIR)/include \
           -I$(BAL_API_DIR)/include/object_model
 CXXFLAGS += $(BAL_INC) -I $(BAL_DIR)/lib/cmdline
 CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST -DENABLE_LOG -DENABLE_CLI

 sdk: onl bal-api-$(BAL_API_VER)
 ifeq ("$(wildcard $(BAL_DIR))","")
 	mkdir $(BAL_DIR)
 	tar zxvf download/$(BAL_ZIP) --strip 1 -C $(BAL_DIR)
 	cp download/$(SDK_ZIP) $(BCM_SDK)
 	chmod -R 744 $(BAL_DIR)
 	cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR)
 	# For fixed Broadcom bug, The patch file have provided temporary change in BAL v3.0
 	# Broadcom CS8250563: Getting the wrong state using NNI interface?
 	# Broadcom CS8341292: I got error message "Failed to allocate message for NNI state change!"
 	cat download/ACCTON_BAL_$(BAL_VER)-V$(DEV_VER)_r1-bug-fixed.patch | patch -p1 -d $(BAL_DIR)
 	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) ONL_DIR=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux SW_UTIL_SHELL=y OPEN_SOURCE=y
 	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board
 endif

 bal-release: sdk
 	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board

 bal-clean:
 	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) clean

 ########################################################################
 ##
 ##
 ##        OpenOLT API
 ##
 ##
 OPENOLT_PROTOS_DIR = ../protos
 OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
 CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens
 protos:
 	make -C $(OPENOLT_PROTOS_DIR) all
 protos-clean:
 	-make -C $(OPENOLT_PROTOS_DIR) clean

 ########################################################################
 ##
 ##
 ##        common
 ##
 ##
 common/%.o: common/%.cc
 	$(CXX) $(CXXFLAGS) -I./common -c $< -o $@

 ########################################################################
 ##
 ##
 ##        device
 ##
 ##
 device/$(OPENOLTDEVICE)/%.o: device/$(OPENOLTDEVICE)/%.cc
 	$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@

 device/generic/%.o: device/generic/%.cc
 	$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@

 ########################################################################
 ##
 ##
 ##        sim
 ##
 ##
 SIM_SRCS = $(wildcard sim/*.cc) $(wildcard common/*.cc)
 SIM_OBJS = $(SIM_SRCS:.cc=.o)
 SIM_DEPS = $(SIM_SRCS:.cc=.d)
 sim: sim/openoltsim
 sim/openoltsim: protos $(SIM_OBJS)
 	$(CXX) -pthread -L/usr/local/lib $(SIM_OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -lgrpc++ -lgrpc -lpthread -ldl
 sim/%.o: sim/%.cc
 	$(CXX) -std=c++11 -fpermissive -Wno-literal-suffix -I./common -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens -c $< -o $@
 clean-sim:
 	rm -f sim/openoltsim $(SIM_OBJS) $(SIM_DEPS)

 ########################################################################
 ##
 ##
 ##        openolt
 ##
 ##
 SRCS = $(wildcard src/*.cc) $(wildcard common/*.cc) $(wildcard device/$(OPENOLTDEVICE)/*.cc)
 OBJS = $(SRCS:.cc=.o)
 DEPS = $(SRCS:.cc=.d)
 .DEFAULT_GOAL := all
 all: $(BUILD_DIR)/openolt
 $(BUILD_DIR)/openolt: sdk protos $(OBJS)
 	$(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $@ -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc)
 	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/$(OPENOLTDEVICE)/release/release_$(OPENOLTDEVICE)_V$(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(DEV_VER).tar.gz $(BUILD_DIR)/.
 	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_reference/host_api/strip/libbal_host_api.so $(BUILD_DIR)/.
 	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_driver/dev_mgmt_daemon/dev_mgmt_daemon $(BUILD_DIR)/.
 	ln -sf $(LIBGRPC_PATH)/libgrpc.so.6 $(BUILD_DIR)/libgrpc.so.6
 	ln -sf $(LIBGRPC_PATH)/libgrpc++.so.1 $(BUILD_DIR)/libgrpc++.so.1
 	ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 $(BUILD_DIR)/libstdc++.so.6
 	strip $(BUILD_DIR)/openolt
 src/%.o: src/%.cc
 	$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -I./common -c $< -o $@

 deb:
 	cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(DEV_VER).tar.gz mkdebian/debian
 	cp $(BUILD_DIR)/openolt mkdebian/debian
 	cp $(BUILD_DIR)/libgrpc.so.6 mkdebian/debian
 	cp $(BUILD_DIR)/libgrpc++.so.1 mkdebian/debian
 	cp $(BUILD_DIR)/libstdc++.so.6 mkdebian/debian
 	cp $(BUILD_DIR)/libbal_host_api.so mkdebian/debian
 	cp -a scripts/init.d mkdebian/debian
 	cd mkdebian && ./build_$(OPENOLTDEVICE)_deb.sh
 	mv *.deb $(BUILD_DIR)/openolt.deb
 	make deb-cleanup

 src/%.o: %.cpp
 	$(CXX) -MMD -c $< -o $@

 deb-cleanup:
 	rm -f mkdebian/debian/$(OPENOLTDEVICE).debhelper.log
 	rm -f mkdebian/debian/$(OPENOLTDEVICE).postinst.debhelper
 	rm -f mkdebian/debian/$(OPENOLTDEVICE).postrm.debhelper
 	rm -f mkdebian/debian/$(OPENOLTDEVICE).substvars
 	rm -rf mkdebian/debian/$(OPENOLTDEVICE)/
 	rm -f mkdebian/debian/libgrpc++.so.1
 	rm -f mkdebian/debian/libgrpc.so.6
 	rm -f mkdebian/debian/openolt
 	rm -f mkdebian/debian/release_$(OPENOLTDEVICE)_V$(BAL_MAJOR_VER).$(DEV_VER).tar.gz
 	rm -rf mkdebian/debian/tmp/
 	rm -f $(OPENOLTDEVICE)_$(BAL_VER)+edgecore-V$(DEV_VER)_amd64.changes

 clean: protos-clean deb-cleanup
 	rm -f $(OBJS) $(DEPS)
 	rm -rf $(OPENOLT_PROTOS_DIR)/googleapis
 	rm -f $(BUILD_DIR)/libgrpc.so.6 $(BUILD_DIR)/libgrpc++.so.1
 	rm -f $(BUILD_DIR)/libbal_api_dist.so
 	rm -f $(BUILD_DIR)/openolt
 	rm -f $(BUILD_DIR)/bal_core_dist
 	rm -f $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_MAJOR_VER).$(DEV_VER).tar.gz
 	rm -f $(BUILD_DIR)/openolt.deb

 distclean:
 	rm -rf $(BUILD_DIR)

 .PHONY: onl sdk bal protos prereq sim
	# Copyright (C) 2018 Open Networking Foundation
	#
	# This program is free software: you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation, either version 3 of the License, or
	# (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program. If not, see <http://www.gnu.org/licenses/>.

	########################################################################
	##
	##
	## Config
	##
	##
	TOP_DIR=`pwd`
	OPENOLTDEVICE ?= generic

	#
	# Three vendor proprietary source files are required to build BAL.
	# SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK.
	# sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK.
	# ACCTON_BAL_<BAL_VER>-<DEV_VER>.patch - Accton/Edgecore's patch.
	BAL_MAJOR_VER = 3
	BAL_MINOR_VER = 0
	BAL_REV_A_VER = 3
	BAL_REV_B_VER = 3
	BAL_API_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER)
	BAL_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_REV_B_VER)
	SDK_VER = 6.5.13
	DEV_VER ?= 201904171432
	#
	# Version of Open Network Linux (ONL).
	ONL_KERN_VER_MAJOR = 4.14
	#
	# Build directory
	BUILD_DIR = build
	#
	# GRPC installation
	GRPC_ADDR = https://github.com/grpc/grpc
	GRPC_DST = /tmp/grpc
	GRPC_VER = v1.10.x

	USER := $(shell echo $(USER))
	#
	########################################################################
	##
	##
	## Install prerequisites
	##
	##
	HOST_SYSTEM = $(shell uname \| cut -f 1 -d_)
	SYSTEM ?= $(HOST_SYSTEM)

	LIBGRPC_PATH=$(shell pkg-config --libs-only-L grpc \| sed s/-L// \| sed s/\ //g)
	LIBPROTOBUF_PATH=$(shell PKG_CONFIG_ALLOW_SYSTEM_LIBS=true pkg-config --libs-only-L protobuf \| sed s/-L// \| sed s/\ //g)

	CXX = @CXX@
	CXXFLAGS += @CXXFLAGS@
	CXXFLAGS += $(shell pkg-config --cflags-only-I grpc++)
	CPPFLAGS += `pkg-config --cflags protobuf grpc`
	CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix
	LDFLAGS += @LDFLAGS@
	LDFLAGS += `pkg-config --libs protobuf grpc++ grpc` -ldl -lgpr
	CXXFLAGSDEVICE = -I./device -I./device/$(OPENOLTDEVICE) -I./device/generic

	export CXX CXXFLAGS

	prereq:
	sudo apt-get -q -y install git pkg-config build-essential autoconf libtool libgflags-dev libgtest-dev clang libc++-dev unzip docker.io
	sudo apt-get install -y build-essential autoconf libssl-dev gawk debhelper dh-systemd init-system-helpers

	# Install GRPC, libprotobuf and protoc
	rm -rf $(GRPC_DST)
	git clone -b $(GRPC_VER) $(GRPC_ADDR) $(GRPC_DST)
	cd $(GRPC_DST) && git submodule update --init
	cd $(GRPC_DST)/third_party/protobuf && ./autogen.sh && ./configure
	make -C $(GRPC_DST)/third_party/protobuf
	sudo make -C $(GRPC_DST)/third_party/protobuf install
	sudo ldconfig
	make -C $(GRPC_DST)
	sudo make -C $(GRPC_DST) install
	sudo ldconfig

	docker:
	echo $(USER)
	sudo groupadd -f docker
	ifneq "$(USER)" ""
	sudo usermod -aG docker $(USER)
	endif

	########################################################################
	##
	##
	## ONL
	##
	##
	ONL_REPO = $(OPENOLTDEVICE)-onl
	ONL_DIR = $(BUILD_DIR)/$(ONL_REPO)
	onl:
	if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \
	mkdir -p $(ONL_DIR); \
	git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux; \
	cp download/Makefile.onl $(ONL_DIR)/Makefile; \
	install -m 755 download/build-$(OPENOLTDEVICE).sh $(ONL_DIR)/OpenNetworkLinux; \
	make -C $(ONL_DIR) $(OPENOLTDEVICE)-$(ONL_KERN_VER_MAJOR); \
	fi;
	onl-force:
	make -C $(ONL_DIR) $(OPENOLTDEVICE)-$(ONL_KERN_VER_MAJOR)
	distclean-onl:
	sudo rm -rf $(ONL_DIR)

	########################################################################
	##
	##
	## Broadcom LIBRARY APIs
	##
	##
	BAL_API_DIR = $(BUILD_DIR)/bal-api-$(BAL_API_VER)

	bal-api-$(BAL_API_VER):
	if [ ! -d "$(BAL_API_DIR)" ]; then \
	mkdir -p $(BAL_API_DIR); \
	git clone https://github.com/balapi/bal-api-3.0.git $(BAL_API_DIR); \
	fi;
	bal-api-clean:
	rm $(BAL_API_DIR)

	########################################################################
	##
	##
	## BAL
	##
	##
	BAL_ZIP = SW-BCM68620_$(subst .,_,$(BAL_VER)).tgz
	SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
	ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch
	BAL_DIR = $(BUILD_DIR)/$(OPENOLTDEVICE)-bal
	BCM_SDK = $(BAL_DIR)/switch_sdk/$(SDK_VER)
	BALLIBDIR = $(BAL_DIR)/build/host_reference/host_api
	BALLIBNAME = bal_host_api
	BAL_INC = -I$(BAL_DIR)/host_driver/bal/bal_include \
	-I$(BAL_DIR)/host_driver/topology \
	-I$(BAL_DIR)/host_driver/utils \
	-I$(BAL_DIR)/host_driver/api \
	-I$(BAL_DIR)/host_customized/os_abstraction \
	-I$(BAL_DIR)/host_customized/os_abstraction/posix \
	-I$(BAL_DIR)/host_customized/config \
	-I$(BAL_DIR)/host_driver/api_conn_mgr \
	-I$(BAL_DIR)/host_driver/conn_mgr \
	-I$(BAL_DIR)/host_driver/api/host/topology \
	-I$(BAL_DIR)/host_reference/cli \
	-I$(BAL_DIR)/host_reference/api_cli \
	-I$(BAL_API_DIR)/include \
	-I$(BAL_API_DIR)/include/object_model
	CXXFLAGS += $(BAL_INC) -I $(BAL_DIR)/lib/cmdline
	CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST -DENABLE_LOG -DENABLE_CLI

	sdk: onl bal-api-$(BAL_API_VER)
	ifeq ("$(wildcard $(BAL_DIR))","")
	mkdir $(BAL_DIR)
	tar zxvf download/$(BAL_ZIP) --strip 1 -C $(BAL_DIR)
	cp download/$(SDK_ZIP) $(BCM_SDK)
	chmod -R 744 $(BAL_DIR)
	cat download/$(ACCTON_PATCH) \| patch -p1 -d $(BAL_DIR)
	# For fixed Broadcom bug, The patch file have provided temporary change in BAL v3.0
	# Broadcom CS8250563: Getting the wrong state using NNI interface?
	# Broadcom CS8341292: I got error message "Failed to allocate message for NNI state change!"
	cat download/ACCTON_BAL_$(BAL_VER)-V$(DEV_VER)_r1-bug-fixed.patch \| patch -p1 -d $(BAL_DIR)
	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) ONL_DIR=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux SW_UTIL_SHELL=y OPEN_SOURCE=y
	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board
	endif

	bal-release: sdk
	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board

	bal-clean:
	make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) clean

	########################################################################
	##
	##
	## OpenOLT API
	##
	##
	OPENOLT_PROTOS_DIR = ../protos
	OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
	CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens
	protos:
	make -C $(OPENOLT_PROTOS_DIR) all
	protos-clean:
	-make -C $(OPENOLT_PROTOS_DIR) clean

	########################################################################
	##
	##
	## common
	##
	##
	common/%.o: common/%.cc
	$(CXX) $(CXXFLAGS) -I./common -c $< -o $@

	########################################################################
	##
	##
	## device
	##
	##
	device/$(OPENOLTDEVICE)/%.o: device/$(OPENOLTDEVICE)/%.cc
	$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@

	device/generic/%.o: device/generic/%.cc
	$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@

	########################################################################
	##
	##
	## sim
	##
	##
	SIM_SRCS = $(wildcard sim/.cc) $(wildcard common/.cc)
	SIM_OBJS = $(SIM_SRCS:.cc=.o)
	SIM_DEPS = $(SIM_SRCS:.cc=.d)
	sim: sim/openoltsim
	sim/openoltsim: protos $(SIM_OBJS)
	$(CXX) -pthread -L/usr/local/lib $(SIM_OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -lgrpc++ -lgrpc -lpthread -ldl
	sim/%.o: sim/%.cc
	$(CXX) -std=c++11 -fpermissive -Wno-literal-suffix -I./common -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens -c $< -o $@
	clean-sim:
	rm -f sim/openoltsim $(SIM_OBJS) $(SIM_DEPS)

	########################################################################
	##
	##
	## openolt
	##
	##
	SRCS = $(wildcard src/.cc) $(wildcard common/.cc) $(wildcard device/$(OPENOLTDEVICE)/*.cc)
	OBJS = $(SRCS:.cc=.o)
	DEPS = $(SRCS:.cc=.d)
	.DEFAULT_GOAL := all
	all: $(BUILD_DIR)/openolt
	$(BUILD_DIR)/openolt: sdk protos $(OBJS)
	$(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $@ -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc)
	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/$(OPENOLTDEVICE)/release/release_$(OPENOLTDEVICE)_V$(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(DEV_VER).tar.gz $(BUILD_DIR)/.
	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_reference/host_api/strip/libbal_host_api.so $(BUILD_DIR)/.
	ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_driver/dev_mgmt_daemon/dev_mgmt_daemon $(BUILD_DIR)/.
	ln -sf $(LIBGRPC_PATH)/libgrpc.so.6 $(BUILD_DIR)/libgrpc.so.6
	ln -sf $(LIBGRPC_PATH)/libgrpc++.so.1 $(BUILD_DIR)/libgrpc++.so.1
	ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 $(BUILD_DIR)/libstdc++.so.6
	strip $(BUILD_DIR)/openolt
	src/%.o: src/%.cc
	$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -I./common -c $< -o $@

	deb:
	cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(DEV_VER).tar.gz mkdebian/debian
	cp $(BUILD_DIR)/openolt mkdebian/debian
	cp $(BUILD_DIR)/libgrpc.so.6 mkdebian/debian
	cp $(BUILD_DIR)/libgrpc++.so.1 mkdebian/debian
	cp $(BUILD_DIR)/libstdc++.so.6 mkdebian/debian
	cp $(BUILD_DIR)/libbal_host_api.so mkdebian/debian
	cp -a scripts/init.d mkdebian/debian
	cd mkdebian && ./build_$(OPENOLTDEVICE)_deb.sh
	mv *.deb $(BUILD_DIR)/openolt.deb
	make deb-cleanup

	src/%.o: %.cpp
	$(CXX) -MMD -c $< -o $@

	deb-cleanup:
	rm -f mkdebian/debian/$(OPENOLTDEVICE).debhelper.log
	rm -f mkdebian/debian/$(OPENOLTDEVICE).postinst.debhelper
	rm -f mkdebian/debian/$(OPENOLTDEVICE).postrm.debhelper
	rm -f mkdebian/debian/$(OPENOLTDEVICE).substvars
	rm -rf mkdebian/debian/$(OPENOLTDEVICE)/
	rm -f mkdebian/debian/libgrpc++.so.1
	rm -f mkdebian/debian/libgrpc.so.6
	rm -f mkdebian/debian/openolt
	rm -f mkdebian/debian/release_$(OPENOLTDEVICE)_V$(BAL_MAJOR_VER).$(DEV_VER).tar.gz
	rm -rf mkdebian/debian/tmp/
	rm -f $(OPENOLTDEVICE)_$(BAL_VER)+edgecore-V$(DEV_VER)_amd64.changes

	clean: protos-clean deb-cleanup
	rm -f $(OBJS) $(DEPS)
	rm -rf $(OPENOLT_PROTOS_DIR)/googleapis
	rm -f $(BUILD_DIR)/libgrpc.so.6 $(BUILD_DIR)/libgrpc++.so.1
	rm -f $(BUILD_DIR)/libbal_api_dist.so
	rm -f $(BUILD_DIR)/openolt
	rm -f $(BUILD_DIR)/bal_core_dist
	rm -f $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_MAJOR_VER).$(DEV_VER).tar.gz
	rm -f $(BUILD_DIR)/openolt.deb

	distclean:
	rm -rf $(BUILD_DIR)

	.PHONY: onl sdk bal protos prereq sim