| /* |
| Copyright (C) 2018 Open Networking Foundation |
| |
| This program is free software: you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation, either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include "indications.h" |
| #include "core.h" |
| #include "utils.h" |
| extern "C" |
| { |
| #include <bcmos_system.h> |
| #include <bal_api.h> |
| #include <bal_api_end.h> |
| } |
| |
| using grpc::Status; |
| |
| Queue<openolt::Indication> oltIndQ; |
| //Queue<openolt::Indication*> oltIndQ; |
| |
| bool subscribed = false; |
| |
| bcmos_errno OmciIndication(bcmbal_obj *obj); |
| |
| bcmos_errno OltIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::OltIndication* olt_ind = new openolt::OltIndication; |
| Status status; |
| |
| bcmbal_access_terminal_ind *acc_term_ind = (bcmbal_access_terminal_ind *)obj; |
| if (acc_term_ind->data.oper_status == BCMBAL_STATUS_UP) { |
| olt_ind->set_oper_state("up"); |
| } else { |
| olt_ind->set_oper_state("down"); |
| } |
| ind.set_allocated_olt_ind(olt_ind); |
| std::cout << "olt indication, oper_state:" << ind.olt_ind().oper_state() << std::endl; |
| oltIndQ.push(ind); |
| |
| // Enable all PON interfaces. |
| for (int i = 0; i < MAX_SUPPORTED_INTF; i++) { |
| status = EnablePonIf_(i); |
| if (!status.ok()) { |
| // FIXME - raise alarm to report error in enabling PON |
| } |
| } |
| |
| /* register for omci indication */ |
| { |
| bcmbal_cb_cfg cb_cfg = {}; |
| uint16_t ind_subgroup; |
| |
| cb_cfg.module = BCMOS_MODULE_ID_NONE; |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_PACKET; |
| ind_subgroup = BCMBAL_IND_SUBGROUP(packet, itu_omci_channel_rx); |
| cb_cfg.p_object_key_info = NULL; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)OmciIndication; |
| bcmbal_subscribe_ind(0, &cb_cfg); |
| } |
| |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno LosIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| std::cout << "LOS indication " << std::endl; |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno IfIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::IntfIndication* intf_ind = new openolt::IntfIndication; |
| |
| std::cout << "intf indication, intf_id:" |
| << ((bcmbal_interface_ind *)obj)->key.intf_id << std::endl; |
| |
| intf_ind->set_intf_id(((bcmbal_interface_ind *)obj)->key.intf_id); |
| if (((bcmbal_interface_ind *)obj)->data.oper_status == BCMBAL_STATUS_UP) { |
| intf_ind->set_oper_state("up"); |
| } else { |
| intf_ind->set_oper_state("down"); |
| } |
| ind.set_allocated_intf_ind(intf_ind); |
| |
| oltIndQ.push(ind); |
| |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno IfOperIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::IntfOperIndication* intf_oper_ind = new openolt::IntfOperIndication; |
| std::cout << "intf oper state indication, intf_id:" |
| << ((bcmbal_interface_oper_status_change *)obj)->key.intf_id |
| << " type:" << ((bcmbal_interface_oper_status_change *)obj)->key.intf_type |
| << " oper_state:" << ((bcmbal_interface_oper_status_change *)obj)->data.new_oper_status |
| << " admin_state:" << ((bcmbal_interface_oper_status_change *)obj)->data.admin_state |
| << std::endl; |
| |
| intf_oper_ind->set_intf_id(((bcmbal_interface_oper_status_change *)obj)->key.intf_id); |
| |
| if (((bcmbal_interface_oper_status_change *)obj)->key.intf_type == BCMBAL_INTF_TYPE_NNI) { |
| intf_oper_ind->set_type("nni"); |
| } else if (((bcmbal_interface_oper_status_change *)obj)->key.intf_type == BCMBAL_INTF_TYPE_PON) { |
| intf_oper_ind->set_type("pon"); |
| } else { |
| intf_oper_ind->set_type("unknown"); |
| } |
| |
| if (((bcmbal_interface_oper_status_change *)obj)->data.new_oper_status == BCMBAL_STATUS_UP) { |
| intf_oper_ind->set_oper_state("up"); |
| } else { |
| intf_oper_ind->set_oper_state("down"); |
| } |
| |
| ind.set_allocated_intf_oper_ind(intf_oper_ind); |
| |
| oltIndQ.push(ind); |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno OnuAlarmIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| std::cout << "onu alarm indication" << std::endl; |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno OnuDyingGaspIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::OnuIndication* onu_ind = new openolt::OnuIndication; |
| openolt::SerialNumber* serial_number = new openolt::SerialNumber; |
| |
| bcmbal_subscriber_terminal_key *key = |
| &(((bcmbal_subscriber_terminal_dgi*)obj)->key); |
| |
| bcmbal_subscriber_terminal_dgi_data *data = |
| &(((bcmbal_subscriber_terminal_dgi*)obj)->data); |
| |
| |
| std::cout << "onu dying-gasp indication, intf_id:" |
| << key->intf_id |
| << ", onu_id:" |
| << key->sub_term_id |
| << ", alarm: " |
| << data->dgi_status << std::endl; |
| |
| onu_ind->set_intf_id(key->intf_id); |
| onu_ind->set_onu_id(key->sub_term_id); |
| const char* zeros4 = "0000"; |
| const char* zeros8 = "00000000"; |
| serial_number->set_vendor_id(zeros4); |
| serial_number->set_vendor_specific(zeros8); |
| onu_ind->set_allocated_serial_number(serial_number); |
| //ONU is dying, set operating state to down |
| onu_ind->set_oper_state("down"); |
| //TODO: set admin state to unknow ? For now assume that it is up otherwise |
| //we would not have received the alarm |
| onu_ind->set_admin_state("up"); |
| |
| |
| ind.set_allocated_onu_ind(onu_ind); |
| |
| oltIndQ.push(ind); |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno OnuDiscoveryIndication(bcmbal_cfg *obj) { |
| openolt::Indication ind; |
| openolt::OnuDiscIndication* onu_disc_ind = new openolt::OnuDiscIndication; |
| openolt::SerialNumber* serial_number = new openolt::SerialNumber; |
| |
| bcmbal_subscriber_terminal_key *key = |
| &(((bcmbal_subscriber_terminal_sub_term_disc*)obj)->key); |
| |
| bcmbal_subscriber_terminal_sub_term_disc_data *data = |
| &(((bcmbal_subscriber_terminal_sub_term_disc*)obj)->data); |
| |
| bcmbal_serial_number *in_serial_number = &(data->serial_number); |
| |
| std::cout << "onu discover indication, intf_id:" |
| << key->intf_id |
| << " serial_number:" |
| << serial_number_to_str(in_serial_number) << std::endl; |
| |
| onu_disc_ind->set_intf_id(key->intf_id); |
| serial_number->set_vendor_id(reinterpret_cast<const char *>(in_serial_number->vendor_id), 4); |
| serial_number->set_vendor_specific(reinterpret_cast<const char *>(in_serial_number->vendor_specific), 8); |
| onu_disc_ind->set_allocated_serial_number(serial_number); |
| ind.set_allocated_onu_disc_ind(onu_disc_ind); |
| |
| oltIndQ.push(ind); |
| |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno OnuIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::OnuIndication* onu_ind = new openolt::OnuIndication; |
| openolt::SerialNumber* serial_number = new openolt::SerialNumber; |
| |
| bcmbal_subscriber_terminal_key *key = |
| &(((bcmbal_subscriber_terminal_ind*)obj)->key); |
| |
| bcmbal_subscriber_terminal_ind_data *data = |
| &(((bcmbal_subscriber_terminal_ind*)obj)->data); |
| |
| bcmbal_serial_number *in_serial_number = &(data->serial_number); |
| |
| std::cout << "onu indication, intf_id:" |
| << key->intf_id |
| << " serial_number:" |
| << serial_number_to_str(in_serial_number) << std::endl; |
| |
| onu_ind->set_intf_id(key->intf_id); |
| onu_ind->set_onu_id(key->sub_term_id); |
| serial_number->set_vendor_id(reinterpret_cast<const char *>(in_serial_number->vendor_id), 4); |
| serial_number->set_vendor_specific(reinterpret_cast<const char *>(in_serial_number->vendor_specific), 8); |
| onu_ind->set_allocated_serial_number(serial_number); |
| if (data->oper_status == BCMBAL_STATE_UP) { |
| onu_ind->set_oper_state("up"); |
| } else { |
| onu_ind->set_oper_state("down"); |
| } |
| if (data->admin_state == BCMBAL_STATE_UP) { |
| onu_ind->set_admin_state("up"); |
| } else { |
| onu_ind->set_admin_state("down"); |
| } |
| |
| ind.set_allocated_onu_ind(onu_ind); |
| |
| oltIndQ.push(ind); |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno OnuOperIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::OnuIndication* onu_ind = new openolt::OnuIndication; |
| openolt::SerialNumber* serial_number = new openolt::SerialNumber; |
| |
| bcmbal_subscriber_terminal_key *key = |
| &(((bcmbal_subscriber_terminal_oper_status_change*)obj)->key); |
| |
| bcmbal_subscriber_terminal_oper_status_change_data *data = |
| &(((bcmbal_subscriber_terminal_oper_status_change*)obj)->data); |
| |
| |
| std::cout << "onu oper state indication, intf_id:" |
| << key->intf_id |
| << " onu_id: " |
| << key->sub_term_id |
| << " old oper state: " |
| << data->old_oper_status |
| << " new oper state:" |
| << data->new_oper_status << std::endl; |
| |
| onu_ind->set_intf_id(key->intf_id); |
| onu_ind->set_onu_id(key->sub_term_id); |
| const char* zeros4 = "0000"; |
| const char* zeros8 = "00000000"; |
| serial_number->set_vendor_id(zeros4); |
| serial_number->set_vendor_specific(zeros8); |
| onu_ind->set_allocated_serial_number(serial_number); |
| if (data->new_oper_status == BCMBAL_STATE_UP) { |
| onu_ind->set_oper_state("up"); |
| } else { |
| onu_ind->set_oper_state("down"); |
| } |
| if (data->admin_state == BCMBAL_STATE_UP) { |
| onu_ind->set_admin_state("up"); |
| } else { |
| onu_ind->set_admin_state("down"); |
| } |
| |
| ind.set_allocated_onu_ind(onu_ind); |
| |
| oltIndQ.push(ind); |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno OmciIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::OmciIndication* omci_ind = new openolt::OmciIndication; |
| bcmbal_packet_itu_omci_channel_rx *in = |
| (bcmbal_packet_itu_omci_channel_rx *)obj; |
| |
| std::cout << "omci indication" << std::endl; |
| |
| omci_ind->set_intf_id(in->key.packet_send_dest.u.itu_omci_channel.intf_id); |
| omci_ind->set_onu_id(in->key.packet_send_dest.u.itu_omci_channel.sub_term_id); |
| omci_ind->set_pkt(in->data.pkt.val, in->data.pkt.len); |
| |
| ind.set_allocated_omci_ind(omci_ind); |
| oltIndQ.push(ind); |
| |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno PacketIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::PacketIndication* pkt_ind = new openolt::PacketIndication; |
| bcmbal_packet_bearer_channel_rx *in = (bcmbal_packet_bearer_channel_rx *)obj; |
| |
| std::cout << "packet indication" |
| << " intf_id:" << in->data.intf_id |
| << " svc_port:" << in->data.svc_port |
| << " flow_id:" << in->data.flow_id |
| << std::endl; |
| |
| pkt_ind->set_intf_id(in->data.intf_id); |
| pkt_ind->set_gemport_id(in->data.svc_port); |
| pkt_ind->set_flow_id(in->data.flow_id); |
| pkt_ind->set_pkt(in->data.pkt.val, in->data.pkt.len); |
| |
| ind.set_allocated_pkt_ind(pkt_ind); |
| oltIndQ.push(ind); |
| |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno FlowOperIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| std::cout << "flow oper state indication" << std::endl; |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno FlowIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| std::cout << "flow indication" << std::endl; |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno TmQIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| std::cout << "traffic mgmt queue indication" << std::endl; |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno TmSchedIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| std::cout << "traffic mgmt sheduler indication" << std::endl; |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno McastGroupIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| std::cout << "mcast group indication" << std::endl; |
| return BCM_ERR_OK; |
| } |
| |
| Status SubscribeIndication() { |
| bcmbal_cb_cfg cb_cfg = {}; |
| uint16_t ind_subgroup; |
| |
| if (subscribed) { |
| return Status::OK; |
| } |
| |
| cb_cfg.module = BCMOS_MODULE_ID_NONE; |
| |
| |
| /* OLT device indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_ACCESS_TERMINAL; |
| ind_subgroup = bcmbal_access_terminal_auto_id_ind; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)OltIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Olt indication subscribe failed"); |
| } |
| |
| /* Interface LOS indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_INTERFACE; |
| ind_subgroup = bcmbal_interface_auto_id_los; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)LosIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "LOS indication subscribe failed"); |
| } |
| |
| /* Interface indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_INTERFACE; |
| ind_subgroup = bcmbal_interface_auto_id_ind; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)IfIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Interface indication subscribe failed"); |
| } |
| |
| /* Interface operational state change indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_INTERFACE; |
| ind_subgroup = bcmbal_interface_auto_id_oper_status_change; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)IfOperIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Interface operations state change indication subscribe failed"); |
| } |
| |
| /* onu alarm indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_SUBSCRIBER_TERMINAL; |
| ind_subgroup = bcmbal_subscriber_terminal_auto_id_sub_term_alarm; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)OnuAlarmIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "onu alarm indication subscribe failed"); |
| } |
| |
| /* onu dying-gasp indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_SUBSCRIBER_TERMINAL; |
| ind_subgroup = bcmbal_subscriber_terminal_auto_id_dgi; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)OnuDyingGaspIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "onu dying-gasp indication subscribe failed"); |
| } |
| |
| /* onu discovery indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_SUBSCRIBER_TERMINAL; |
| ind_subgroup = bcmbal_subscriber_terminal_auto_id_sub_term_disc; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)OnuDiscoveryIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "onu discovery indication subscribe failed"); |
| } |
| |
| /* onu indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_SUBSCRIBER_TERMINAL; |
| ind_subgroup = bcmbal_subscriber_terminal_auto_id_ind; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)OnuIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "onu indication subscribe failed"); |
| } |
| /* onu operational state change indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_SUBSCRIBER_TERMINAL; |
| ind_subgroup = bcmbal_subscriber_terminal_auto_id_oper_status_change; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)OnuOperIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "onu operational state change indication subscribe failed"); |
| } |
| |
| /* Packet (bearer) indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_PACKET; |
| ind_subgroup = bcmbal_packet_auto_id_bearer_channel_rx; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)PacketIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Packet indication subscribe failed"); |
| } |
| |
| /* Flow Operational State Change */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_FLOW; |
| ind_subgroup = bcmbal_flow_auto_id_oper_status_change; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)FlowOperIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Flow operational state change indication subscribe failed"); |
| } |
| /* Flow Indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_FLOW; |
| ind_subgroup = bcmbal_flow_auto_id_ind; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)FlowIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Flow indication subscribe failed"); |
| } |
| |
| /* TM queue indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_TM_QUEUE; |
| ind_subgroup = bcmbal_tm_queue_auto_id_ind; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)TmQIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Traffic mgmt queue indication subscribe failed"); |
| } |
| |
| /* TM sched indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_TM_SCHED; |
| ind_subgroup = bcmbal_tm_sched_auto_id_ind; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)TmSchedIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Traffic mgmt queue indication subscribe failed"); |
| } |
| |
| /* Multicast group indication */ |
| cb_cfg.obj_type = BCMBAL_OBJ_ID_GROUP; |
| ind_subgroup = bcmbal_group_auto_id_ind; |
| cb_cfg.p_subgroup = &ind_subgroup; |
| cb_cfg.ind_cb_hdlr = (f_bcmbal_ind_handler)McastGroupIndication; |
| if (BCM_ERR_OK != bcmbal_subscribe_ind(DEFAULT_ATERM_ID, &cb_cfg)) { |
| return Status(grpc::StatusCode::INTERNAL, "Multicast group indication subscribe failed"); |
| } |
| |
| subscribed = true; |
| |
| return Status::OK; |
| } |