| /* |
| * Copyright 2018-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef __VENDOR_H__ |
| #define __VENDOR_H__ |
| #include "device.h" |
| #define VENDOR_ID "generic" |
| #define MODEL_ID "generic" |
| |
| // DeviceInfo definitions |
| |
| #define ONU_ID_START 1 |
| #define ONU_ID_END 32 |
| #define MAX_ONUS_PER_PON 32 |
| |
| #define ALLOC_ID_START 1024 |
| #define ALLOC_ID_END 16383 |
| |
| #define GEM_PORT_ID_START 1024 |
| #define GEM_PORT_ID_END 65535 |
| |
| #define FLOW_ID_START 1 |
| #define FLOW_ID_END 65535 |
| #define MAX_FLOW_ID 65535 |
| #define INVALID_FLOW_ID 0 |
| |
| #define MAC_DEVICE_ACTIVATION_DELAY 200000 // in microseconds |
| |
| #define DEFAULT_MAC_SYSTEM_MODE BCMOLT_SYSTEM_MODE_GPON__16_X |
| //#define DEFAULT_MAC_SYSTEM_MODE BCMOLT_SYSTEM_MODE_XGS__2_X |
| #define DEFAULT_PON_MODE BCMOLT_PON_TYPE_GPON |
| // #define DEFAULT_PON_MODE BCMOLT_PON_TYPE_XGPON |
| |
| |
| #define TOTAL_PON_TRX_PORTS 16 // total PON transceiver ports |
| #define TOTAL_PON_PORTS 16 // total PON ports (we could have up to 2 PON ports on the OLT MAC mapped to the external PON Trx) |
| const int trx_port_to_pon_port_map[TOTAL_PON_TRX_PORTS][TOTAL_PON_PORTS/TOTAL_PON_TRX_PORTS]={{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10}, |
| {11},{12},{13},{14},{15}}; |
| #define PONS_PER_TRX (TOTAL_PON_TRX_PORTS/TOTAL_PON_PORTS) // if there are more than one OLT MAC device, |
| // they all have to be of the same type for this to work. |
| |
| const int bus_index[TOTAL_PON_TRX_PORTS] = { |
| 41, 42, 56, 55, 43, 44, 54, 53, |
| 45, 46, 52, 51, 47, 48, 50, 49 |
| }; |
| |
| |
| #define PORT_ADDRESS 50 |
| |
| #define NAME_EEPROM "sfp_eeprom" |
| |
| #define EEPROM_VENDOR_NAME_START_IDX 148 |
| #define EEPROM_VENDOR_NAME_LENGTH 16 |
| |
| #define EEPROM_VENDOR_OUI_START_IDX 165 |
| #define EEPROM_VENDOR_OUI_LENGTH 3 |
| |
| #define EEPROM_VENDOR_PART_NUMBER_START_IDX 168 |
| #define EEPROM_VENDOR_PART_NUMBER_LENGTH 16 |
| |
| #define EEPROM_VENDOR_REVISION_START_IDX 184 |
| #define EEPROM_VENDOR_REVISION_LENGTH 2 |
| |
| #define EEPROM_DOWNSTREAM_WAVELENGTH_START_IDX 186 |
| #define EEPROM_DOWNSTREAM_WAVELENGTH_LENGTH 2 |
| #define EEPROM_WAVELENGTH_RESOLUTION 0.05 |
| |
| // Define valid values below in case of Combo PON Trx is supported |
| // #define EEPROM_DOWNSTREAM_SECONDARY_WAVELENGTH_START_IDX 120 |
| // #define EEPROM_DOWNSTREAM_SECONDARY_WAVELENGTH_LENGTH 2 |
| |
| class PonTrx: public PonTrxBase { |
| // override the base member functions if you need a different implementation |
| }; |
| |
| |
| #endif |