| /* |
| * Copyright 2018-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "indications.h" |
| #include "core.h" |
| #include "core_data.h" |
| #include "core_utils.h" |
| #include "stats_collection.h" |
| #include "translation.h" |
| #include "state.h" |
| #include "trx_eeprom_reader.h" |
| |
| #include <string> |
| |
| extern "C" |
| { |
| #include <bcmos_system.h> |
| #include <bcmolt_api.h> |
| #include <bcmolt_host_api.h> |
| #include <bcmolt_api_model_api_structs.h> |
| } |
| |
| using grpc::Status; |
| |
| bool subscribed = false; |
| uint32_t nni_intf_id = 0; |
| #define current_device 0 |
| |
| static void OmciIndication(bcmolt_devid olt, bcmolt_msg *msg); |
| |
| #define INTERFACE_STATE_IF_DOWN(state) \ |
| ((state == BCMOLT_INTERFACE_STATE_INACTIVE || \ |
| state == BCMOLT_INTERFACE_STATE_PROCESSING || \ |
| state == BCMOLT_INTERFACE_STATE_ACTIVE_STANDBY) ? BCMOS_TRUE : BCMOS_FALSE) |
| #define INTERFACE_STATE_IF_UP(state) \ |
| ((state == BCMOLT_INTERFACE_STATE_ACTIVE_WORKING) ? BCMOS_TRUE : BCMOS_FALSE) |
| #define ONU_STATE_IF_DOWN(state) \ |
| ((state == BCMOLT_ONU_OPERATION_INACTIVE || \ |
| state == BCMOLT_ONU_OPERATION_DISABLE || \ |
| state == BCMOLT_ONU_OPERATION_ACTIVE_STANDBY) ? BCMOS_TRUE : BCMOS_FALSE) |
| #define ONU_STATE_IF_UP(state) \ |
| ((state == BCMOLT_ONU_OPERATION_ACTIVE) ? BCMOS_TRUE : BCMOS_FALSE) |
| #define ONU_ACTIVATION_COMPLETED_SUCCESS(state) \ |
| ((state == BCMOLT_RESULT_SUCCESS) ? BCMOS_TRUE : BCMOS_FALSE) |
| #define ONU_ACTIVATION_COMPLETED_FAIL(state) \ |
| ((state != BCMOLT_RESULT_SUCCESS) ? BCMOS_TRUE : BCMOS_FALSE) |
| #define SET_OPER_STATE(indication,state) \ |
| (INTERFACE_STATE_IF_UP(state)) ? indication->set_oper_state("up") : \ |
| indication->set_oper_state("down") |
| #define GET_FLOW_TYPE(type) \ |
| (type == BCMOLT_FLOW_TYPE_UPSTREAM) ? "upstream" : \ |
| (type == BCMOLT_FLOW_TYPE_DOWNSTREAM) ? "downstream" : \ |
| (type == BCMOLT_FLOW_TYPE_MULTICAST) ? "multicast" : "unknown" |
| |
| std::string bcmolt_to_grpc_intf_type(bcmolt_interface_type intf_type) |
| { |
| if (intf_type == BCMOLT_INTERFACE_TYPE_NNI) { |
| return "nni"; |
| } else if (intf_type == BCMOLT_INTERFACE_TYPE_PON) { |
| return "pon"; |
| } else if (intf_type == BCMOLT_INTERFACE_TYPE_HOST) { |
| return "host"; |
| } |
| return "unknown"; |
| } |
| |
| std::string bcmolt_to_grpc_interface_rf__intf_type(bcmolt_interface_type intf_type) |
| { |
| if (intf_type == BCMOLT_INTERFACE_TYPE_NNI) { |
| return "nni"; |
| } else if (intf_type == BCMOLT_INTERFACE_TYPE_PON) { |
| return "pon"; |
| } else if (intf_type == BCMOLT_INTERFACE_TYPE_HOST) { |
| return "host"; |
| } |
| return "unknown"; |
| } |
| |
| inline uint64_t get_pon_stats_alarms_data(bcmolt_interface pon_ni, bcmolt_onu_id onu_id, bcmolt_onu_itu_pon_stats_data_id stat) { |
| bcmos_errno err; |
| bcmolt_onu_itu_pon_stats itu_pon_stat; /* declare main API struct */ |
| bcmolt_onu_key key = {}; /* declare key */ |
| bcmolt_stat_flags clear_on_read = BCMOLT_STAT_FLAGS_NONE; /* declare 'clear on read' flag */ |
| |
| key.pon_ni = pon_ni; |
| key.onu_id = onu_id; |
| |
| /* Initialize the API struct. */ |
| BCMOLT_STAT_INIT(&itu_pon_stat, onu, itu_pon_stats, key); |
| switch (stat) { |
| case BCMOLT_ONU_ITU_PON_STATS_DATA_ID_RDI_ERRORS: |
| BCMOLT_FIELD_SET_PRESENT(&itu_pon_stat.data, onu_itu_pon_stats_data, rdi_errors); |
| err = bcmolt_stat_get(dev_id, &itu_pon_stat.hdr, clear_on_read ? BCMOLT_STAT_FLAGS_CLEAR_ON_READ : BCMOLT_STAT_FLAGS_NONE); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get rdi_errors, err = %s\n", bcmos_strerror(err)); |
| return err; |
| } |
| return itu_pon_stat.data.rdi_errors; |
| /* It is a further requirement |
| case BCMOLT_ONU_ITU_PON_STATS_DATA_ID_BIP_ERRORS: |
| BCMOLT_FIELD_SET_PRESENT(&itu_pon_stat.data, onu_itu_pon_stats_data, bip_errors); |
| err = bcmolt_stat_get(dev_id, &itu_pon_stat.hdr, clear_on_read ? BCMOLT_STAT_FLAGS_CLEAR_ON_READ : BCMOLT_STAT_FLAGS_NONE); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get bip_errors, err = %s\n", bcmos_strerror(err)); |
| return err; |
| } |
| return itu_pon_stat.data.bip_errors; |
| */ |
| default: |
| return BCM_ERR_INTERNAL; |
| } |
| |
| return err; |
| } |
| |
| /*std::string getOnuRegistrationId(uint32_t intf_id, uint32_t onu_id){ |
| bcmbal_subscriber_terminal_key key; |
| bcmbal_subscriber_terminal_cfg sub_term_obj = {}; |
| uint8_t *list_mem;// to fetch config details for ONU |
| bcmos_errno err = BCM_ERR_OK; |
| |
| key.sub_term_id =onu_id; |
| key.intf_id = intf_id; |
| BCM_LOG(INFO, openolt_log_id,"Processing subscriber terminal cfg get for: %d",key.intf_id); |
| |
| BCMBAL_CFG_INIT(&sub_term_obj, subscriber_terminal, key); |
| |
| BCMBAL_CFG_PROP_GET(&sub_term_obj, subscriber_terminal, all_properties); |
| char *reg_id = (char*)malloc(sizeof(char)*MAX_REGID_LENGTH); |
| memset(reg_id, '\0', MAX_REGID_LENGTH); |
| |
| //set memory to use for variable-sized lists |
| list_mem = (uint8_t*)malloc(BAL_DYNAMIC_LIST_BUFFER_SIZE); |
| |
| if (list_mem == NULL) |
| { |
| BCM_LOG(ERROR,openolt_log_id,"Memory allocation failed while handling subscriber terminal \ |
| cfg get subscriber_terminal_id(%d), Interface ID(%d)",key.sub_term_id, key.intf_id); |
| return reg_id; |
| } |
| |
| memset(list_mem, 0, BAL_DYNAMIC_LIST_BUFFER_SIZE); |
| BCMBAL_CFG_LIST_BUF_SET(&sub_term_obj, subscriber_terminal, list_mem, BAL_DYNAMIC_LIST_BUFFER_SIZE); |
| |
| //call API |
| err = bcmbal_cfg_get(DEFAULT_ATERM_ID, &sub_term_obj.hdr); |
| |
| if (err != BCM_ERR_OK) |
| { |
| BCM_LOG(ERROR,openolt_log_id, "Failed to get information from BAL subscriber_terminal_id(%d), Interface ID(%d)", |
| key.sub_term_id, key.intf_id); |
| free(list_mem); |
| return reg_id; |
| } |
| |
| BCM_LOG(INFO,openolt_log_id, "Get Subscriber cfg sent to OLT for Subscriber Id(%d) on Interface(%d)", |
| key.sub_term_id, key.intf_id); |
| |
| for (int i=0; i<MAX_REGID_LENGTH ; i++){ |
| reg_id[i]=sub_term_obj.data.registration_id.arr[i]; |
| } |
| |
| free(list_mem); |
| return reg_id; |
| }*/ |
| |
| static void OltOperIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::OltIndication* olt_ind = new openolt::OltIndication; |
| std::string admin_state; |
| |
| switch (msg->subgroup) { |
| case BCMOLT_DEVICE_AUTO_SUBGROUP_CONNECTION_COMPLETE: |
| admin_state = "up"; |
| olt_ind->set_oper_state("up"); |
| break; |
| case BCMOLT_DEVICE_AUTO_SUBGROUP_DISCONNECTION_COMPLETE: |
| admin_state = "down"; |
| olt_ind->set_oper_state("down"); |
| break; |
| case BCMOLT_DEVICE_AUTO_SUBGROUP_CONNECTION_FAILURE: |
| admin_state = "failure"; |
| olt_ind->set_oper_state("failure"); |
| break; |
| } |
| ind.set_allocated_olt_ind(olt_ind); |
| |
| if (msg->subgroup == BCMOLT_DEVICE_AUTO_SUBGROUP_CONNECTION_COMPLETE) { |
| /* register for omci indication */ |
| { |
| bcmolt_rx_cfg rx_cfg = {}; |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OmciIndication; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_omci_packet; |
| rx_cfg.module = BCMOS_MODULE_ID_OMCI_TRANSPORT; |
| bcmolt_ind_subscribe(current_device, &rx_cfg); |
| } |
| state.activate(); |
| } |
| else { |
| state.deactivate(); |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void LosIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::LosIndication* los_ind = new openolt::LosIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_PON_INTERFACE: |
| switch (msg->subgroup) { |
| case BCMOLT_PON_INTERFACE_AUTO_SUBGROUP_LOS: |
| { |
| bcmolt_pon_interface_los* bcm_los_ind = (bcmolt_pon_interface_los *) msg; |
| int intf_id = interface_key_to_port_no(bcm_los_ind->key.pon_ni, |
| BCMOLT_INTERFACE_TYPE_PON); |
| std::string status = alarm_status_to_string(bcm_los_ind->data.status); |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "LOS indication : intf_id: %d port: %d status %s\n", |
| bcm_los_ind->key.pon_ni, intf_id, status.c_str()); |
| |
| los_ind->set_intf_id(intf_id); |
| los_ind->set_status(status); |
| |
| alarm_ind->set_allocated_los_ind(los_ind); |
| ind.set_allocated_alarm_ind(alarm_ind); |
| break; |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void IfIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::IntfIndication* intf_ind = new openolt::IntfIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_PON_INTERFACE: |
| switch (msg->subgroup) { |
| case BCMOLT_PON_INTERFACE_AUTO_SUBGROUP_STATE_CHANGE_COMPLETED: |
| { |
| bcmolt_pon_interface_key *key = |
| &((bcmolt_pon_interface_state_change_completed*)msg)->key; |
| bcmolt_pon_interface_state_change_completed_data *data = |
| &((bcmolt_pon_interface_state_change_completed*)msg)->data; |
| |
| intf_ind->set_intf_id(key->pon_ni); |
| SET_OPER_STATE(intf_ind, data->new_state); |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "intf indication, intf_type %s, intf_id %d, oper_state %s\n", |
| bcmolt_to_grpc_intf_type(BCMOLT_INTERFACE_TYPE_PON).c_str(), key->pon_ni, intf_ind->oper_state().c_str()); |
| |
| ind.set_allocated_intf_ind(intf_ind); |
| break; |
| } |
| } |
| break; |
| case BCMOLT_OBJ_ID_NNI_INTERFACE: |
| switch (msg->subgroup) { |
| case BCMOLT_NNI_INTERFACE_AUTO_SUBGROUP_STATE_CHANGE: |
| { |
| OPENOLT_LOG(INFO, openolt_log_id, "intf indication, intf_id: %d\n", |
| ((bcmolt_nni_interface_state_change *)msg)->key.id); |
| bcmolt_nni_interface_key *key = |
| &((bcmolt_nni_interface_state_change *)msg)->key; |
| bcmolt_nni_interface_state_change_data *data = |
| &((bcmolt_nni_interface_state_change *)msg)->data; |
| |
| intf_ind->set_intf_id(key->id); |
| SET_OPER_STATE(intf_ind, data->new_state); |
| ind.set_allocated_intf_ind(intf_ind); |
| break; |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void IfOperIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::IntfOperIndication* intf_oper_ind = new openolt::IntfOperIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_PON_INTERFACE: |
| switch (msg->subgroup) { |
| case BCMOLT_PON_INTERFACE_AUTO_SUBGROUP_STATE_CHANGE_COMPLETED: |
| { |
| bcmolt_pon_interface_key *key = &((bcmolt_pon_interface_state_change_completed*)msg)->key; |
| bcmolt_pon_interface_state_change_completed_data *data = &((bcmolt_pon_interface_state_change_completed*)msg)->data; |
| intf_oper_ind->set_intf_id(key->pon_ni); |
| intf_oper_ind->set_type(bcmolt_to_grpc_intf_type(BCMOLT_INTERFACE_TYPE_PON)); |
| SET_OPER_STATE(intf_oper_ind, data->new_state); |
| OPENOLT_LOG(INFO, openolt_log_id, "intf oper state indication, intf_type %s, intf_id %d, oper_state %s\n", |
| intf_oper_ind->type().c_str(), key->pon_ni, intf_oper_ind->oper_state().c_str()); |
| ind.set_allocated_intf_oper_ind(intf_oper_ind); |
| break; |
| } |
| } |
| case BCMOLT_OBJ_ID_NNI_INTERFACE: |
| switch (msg->subgroup) { |
| case BCMOLT_NNI_INTERFACE_AUTO_SUBGROUP_STATE_CHANGE: |
| { |
| bcmolt_nni_interface_key *key = &((bcmolt_nni_interface_state_change *)msg)->key; |
| bcmolt_nni_interface_state_change_data *data = &((bcmolt_nni_interface_state_change *)msg)->data; |
| bcmolt_interface intf_id = key->id; |
| bcmolt_interface_type intf_type = BCMOLT_INTERFACE_TYPE_NNI; |
| intf_oper_ind->set_intf_id(key->id); |
| intf_oper_ind->set_type(bcmolt_to_grpc_intf_type(BCMOLT_INTERFACE_TYPE_NNI)); |
| SET_OPER_STATE(intf_oper_ind, data->new_state); |
| OPENOLT_LOG(INFO, openolt_log_id, "intf oper state indication, intf_type %s, intf_id %d, oper_state %s\n", |
| intf_oper_ind->type().c_str(), key->id, intf_oper_ind->oper_state().c_str()); |
| ind.set_allocated_intf_oper_ind(intf_oper_ind); |
| break; |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuAlarmIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuAlarmIndication* onu_alarm_ind = new openolt::OnuAlarmIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_XGPON_ALARM: |
| { |
| bcmolt_onu_xgpon_alarm_data *data = &((bcmolt_onu_xgpon_alarm *)msg)->data; |
| bcmolt_onu_key *key = &((bcmolt_onu_xgpon_alarm *)msg)->key; |
| |
| int port_no = interface_key_to_port_no(key->pon_ni, BCMOLT_INTERFACE_TYPE_PON); |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "onu alarm indication, pon_ni %d, onu_id %d, port_no %d, los_status %s, lob_status %s, lopc_miss_status %s, lopc_mic_error_status %s\n", key->pon_ni, key->onu_id, port_no, alarm_status_to_string(data->xgpon_onu_alarm.losi).c_str(), alarm_status_to_string(data->xgpon_onu_alarm.lobi).c_str(), alarm_status_to_string(data->xgpon_onu_alarm.lopci_miss).c_str(), alarm_status_to_string(data->xgpon_onu_alarm.lopci_mic_error).c_str()); |
| |
| onu_alarm_ind->set_los_status(alarm_status_to_string(data->xgpon_onu_alarm.losi)); |
| onu_alarm_ind->set_lob_status(alarm_status_to_string(data->xgpon_onu_alarm.lobi)); |
| onu_alarm_ind->set_lopc_miss_status(alarm_status_to_string(data->xgpon_onu_alarm.lopci_miss)); |
| onu_alarm_ind->set_lopc_mic_error_status(alarm_status_to_string(data->xgpon_onu_alarm.lopci_mic_error)); |
| onu_alarm_ind->set_intf_id(key->pon_ni); |
| onu_alarm_ind->set_onu_id(key->onu_id); |
| alarm_ind->set_allocated_onu_alarm_ind(onu_alarm_ind); |
| ind.set_allocated_alarm_ind(alarm_ind); |
| break; |
| } |
| case BCMOLT_ONU_AUTO_SUBGROUP_GPON_ALARM: |
| { |
| bcmolt_onu_gpon_alarm_data *data = &((bcmolt_onu_gpon_alarm *)msg)->data; |
| bcmolt_onu_key *key = &((bcmolt_onu_gpon_alarm *)msg)->key; |
| onu_alarm_ind->set_los_status(alarm_status_to_string(data->gpon_onu_alarm.losi)); |
| onu_alarm_ind->set_lofi_status(alarm_status_to_string(data->gpon_onu_alarm.lofi)); |
| onu_alarm_ind->set_loami_status(alarm_status_to_string(data->gpon_onu_alarm.loami)); |
| onu_alarm_ind->set_intf_id(key->pon_ni); |
| onu_alarm_ind->set_onu_id(key->onu_id); |
| alarm_ind->set_allocated_onu_alarm_ind(onu_alarm_ind); |
| ind.set_allocated_alarm_ind(alarm_ind); |
| break; |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuDyingGaspIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::DyingGaspIndication* dgi_ind = new openolt::DyingGaspIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_DGI: |
| { |
| bcmolt_onu_dgi* dgi_data = (bcmolt_onu_dgi *)msg; |
| bcmolt_onu_key *key = &((bcmolt_onu_dgi *)msg)->key; |
| |
| int port_no = interface_key_to_port_no(key->pon_ni, BCMOLT_INTERFACE_TYPE_PON); |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "onu dyinggasp indication, pon_ni %d, onu_id %d, port_no %d, status %s\n", |
| key->pon_ni, key->onu_id, port_no, alarm_status_to_string(dgi_data->data.alarm_status).c_str()); |
| |
| dgi_ind->set_status(alarm_status_to_string(dgi_data->data.alarm_status)); |
| dgi_ind->set_intf_id(key->pon_ni); |
| dgi_ind->set_onu_id(key->onu_id); |
| |
| alarm_ind->set_allocated_dying_gasp_ind(dgi_ind); |
| ind.set_allocated_alarm_ind(alarm_ind); |
| break; |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuDiscoveryIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| //Ignore the onu discovery when agent is not connected to VOLTHA |
| if (!state.is_connected()) { |
| bcmolt_msg_free(msg); |
| return; |
| } |
| |
| openolt::Indication ind; |
| openolt::OnuDiscIndication* onu_disc_ind = new openolt::OnuDiscIndication; |
| openolt::SerialNumber* serial_number = new openolt::SerialNumber; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_PON_INTERFACE: |
| switch (msg->subgroup) { |
| case BCMOLT_PON_INTERFACE_AUTO_SUBGROUP_ONU_DISCOVERED: |
| { |
| bcmolt_pon_interface_key *key = |
| &((bcmolt_pon_interface_onu_discovered *)msg)->key; |
| |
| bcmolt_pon_interface_onu_discovered_data *data = |
| &((bcmolt_pon_interface_onu_discovered *)msg)->data; |
| |
| bcmolt_serial_number *in_serial_number = &(data->serial_number); |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "onu discover indication, pon_ni %d, serial_number %s\n", |
| key->pon_ni, serial_number_to_str(in_serial_number).c_str()); |
| |
| onu_disc_ind->set_intf_id(key->pon_ni); |
| serial_number->set_vendor_id(reinterpret_cast<const char *>(in_serial_number->vendor_id.arr), 4); |
| serial_number->set_vendor_specific(reinterpret_cast<const char *>(in_serial_number->vendor_specific.arr), 8); |
| onu_disc_ind->set_allocated_serial_number(serial_number); |
| ind.set_allocated_onu_disc_ind(onu_disc_ind); |
| break; |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OmciIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::OmciIndication* omci_ind = new openolt::OmciIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_OMCI_PACKET: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_omci_packet*)msg)->key; |
| bcmolt_onu_omci_packet_data *data = &((bcmolt_onu_omci_packet*)msg)->data; |
| |
| OPENOLT_LOG(DEBUG, omci_log_id, "OMCI indication: pon_ni %d, onu_id %d\n", |
| key->pon_ni, key->onu_id); |
| |
| omci_ind->set_intf_id(key->pon_ni); |
| omci_ind->set_onu_id(key->onu_id); |
| omci_ind->set_pkt(data->buffer.arr, data->buffer.len); |
| |
| ind.set_allocated_omci_ind(omci_ind); |
| break; |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void PacketIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ACCESS_CONTROL: |
| switch (msg->subgroup) { |
| case BCMOLT_ACCESS_CONTROL_AUTO_SUBGROUP_RECEIVE_ETH_PACKET: |
| { |
| int32_t gemport_id; |
| bcmolt_access_control_receive_eth_packet *pkt = |
| (bcmolt_access_control_receive_eth_packet*)msg; |
| bcmolt_access_control_receive_eth_packet_data *pkt_data = |
| &((bcmolt_access_control_receive_eth_packet*)msg)->data; |
| |
| // Set the gemport_id to be passed to is_packet_allowed function |
| gemport_id = pkt_data->svc_port_id == BCMOLT_SERVICE_PORT_ID_INVALID ? -1 : pkt_data->svc_port_id; |
| |
| // Allow the packet to host only if "is_packet_allowed" routine returns true, else drop the packet. |
| if (! is_packet_allowed(pkt_data, gemport_id) ) { |
| OPENOLT_LOG(WARNING, openolt_log_id, "packet not allowed to host\n"); |
| bcmolt_msg_free(msg); |
| return; |
| } |
| openolt::PacketIndication* pkt_ind = new openolt::PacketIndication; |
| pkt_ind->set_intf_type(bcmolt_to_grpc_interface_rf__intf_type( |
| (bcmolt_interface_type)pkt_data->interface_ref.intf_type)); |
| pkt_ind->set_intf_id((bcmolt_interface_id)pkt_data->interface_ref.intf_id); |
| pkt_ind->set_pkt(pkt_data->buffer.arr, pkt_data->buffer.len); |
| pkt_ind->set_gemport_id(pkt_data->svc_port_id); |
| if (pkt_data->svc_port_id != BCMOLT_SERVICE_PORT_ID_INVALID) { // case of packet-in from the PON interface |
| pon_gem pg((uint32_t)pkt_data->interface_ref.intf_id, pkt_data->svc_port_id); |
| // Find to onu-uni mapping for the pon-gem key |
| bcmos_fastlock_lock(&pon_gem_to_onu_uni_map_lock); |
| auto it = pon_gem_to_onu_uni_map.find(pg); |
| bcmos_fastlock_unlock(&pon_gem_to_onu_uni_map_lock, 0); |
| if (it == pon_gem_to_onu_uni_map.end()) { |
| bcmolt_msg_free(msg); |
| OPENOLT_LOG(ERROR, openolt_log_id, "onu-uni reference not found for packet-in on gemport=%d, pon_intf_id=%d", pkt_data->svc_port_id, pkt_data->interface_ref.intf_id); |
| return; |
| } |
| pkt_ind->set_onu_id(std::get<0>(it->second)); |
| pkt_ind->set_uni_id(std::get<1>(it->second)); |
| } |
| ind.set_allocated_pkt_ind(pkt_ind); |
| |
| if (pkt_data->interface_ref.intf_type == BCMOLT_INTERFACE_TYPE_PON) { |
| OPENOLT_LOG(INFO, openolt_log_id,"packet indication, ingress intf_type %s, ingress intf_id %d, gem_port %d, onu_id=%d, uni_id=%d\n", |
| pkt_ind->intf_type().c_str(), pkt_ind->intf_id(), pkt_ind->gemport_id(), pkt_ind->onu_id(), pkt_ind->uni_id()); |
| } else if (pkt_data->interface_ref.intf_type == BCMOLT_INTERFACE_TYPE_NNI ) { |
| OPENOLT_LOG(INFO, openolt_log_id, "packet indication, ingress intf_type %s, ingress intf_id %d\n", |
| pkt_ind->intf_type().c_str(), pkt_ind->intf_id()); |
| } |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void ItuPonAllocConfigCompletedInd(bcmolt_devid olt, bcmolt_msg *msg) { |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ITUPON_ALLOC: |
| switch (msg->subgroup) { |
| case BCMOLT_ITUPON_ALLOC_AUTO_SUBGROUP_CONFIGURATION_COMPLETED: |
| { |
| bcmolt_itupon_alloc_configuration_completed *pkt = |
| (bcmolt_itupon_alloc_configuration_completed*)msg; |
| bcmolt_itupon_alloc_configuration_completed_data *pkt_data = |
| &((bcmolt_itupon_alloc_configuration_completed*)msg)->data; |
| |
| alloc_cfg_compltd_key key((uint32_t)pkt->key.pon_ni, (uint32_t) pkt->key.alloc_id); |
| alloc_cfg_complete_result res; |
| res.pon_intf_id = pkt->key.pon_ni; |
| res.alloc_id = pkt->key.alloc_id; |
| |
| pkt_data->status == BCMOLT_RESULT_SUCCESS ? res.status = ALLOC_CFG_STATUS_SUCCESS: res.status = ALLOC_CFG_STATUS_FAIL; |
| switch (pkt_data->new_state) { |
| case BCMOLT_ACTIVATION_STATE_NOT_CONFIGURED: |
| res.state = ALLOC_OBJECT_STATE_NOT_CONFIGURED; |
| break; |
| case BCMOLT_ACTIVATION_STATE_INACTIVE: |
| res.state = ALLOC_OBJECT_STATE_INACTIVE; |
| break; |
| case BCMOLT_ACTIVATION_STATE_PROCESSING: |
| res.state = ALLOC_OBJECT_STATE_PROCESSING; |
| break; |
| case BCMOLT_ACTIVATION_STATE_ACTIVE: |
| res.state = ALLOC_OBJECT_STATE_ACTIVE; |
| break; |
| default: |
| OPENOLT_LOG(ERROR, openolt_log_id, "invalid itu pon alloc activation new_state, pon_intf %u, alloc_id %u, new_state %d\n", |
| pkt->key.pon_ni, pkt->key.alloc_id, pkt_data->new_state); |
| res.state = ALLOC_OBJECT_STATE_NOT_CONFIGURED; |
| } |
| OPENOLT_LOG(INFO, openolt_log_id, "received itu pon alloc cfg complete ind, pon intf %u, alloc_id %u, status %u, new_state %u\n", |
| pkt->key.pon_ni, pkt->key.alloc_id, pkt_data->status, pkt_data->new_state); |
| |
| bcmos_fastlock_lock(&alloc_cfg_wait_lock); |
| // Push the result from BAL to queue |
| std::map<alloc_cfg_compltd_key, Queue<alloc_cfg_complete_result> *>::iterator it = alloc_cfg_compltd_map.find(key); |
| if (it == alloc_cfg_compltd_map.end()) { |
| // could be case of spurious aysnc response, OR, the application timed-out waiting for response and cleared the key. |
| bcmolt_msg_free(msg); |
| OPENOLT_LOG(ERROR, openolt_log_id, "alloc config key not found for alloc_id = %u, pon_intf = %u\n", pkt->key.alloc_id, pkt->key.pon_ni); |
| bcmos_fastlock_unlock(&alloc_cfg_wait_lock, 0); |
| return; |
| } |
| if (it->second) { |
| // Push the result |
| it->second->push(res); |
| } |
| bcmos_fastlock_unlock(&alloc_cfg_wait_lock, 0); |
| } |
| } |
| } |
| |
| bcmolt_msg_free(msg); |
| } |
| |
| static void ItuPonGemConfigCompletedInd(bcmolt_devid olt, bcmolt_msg *msg) { |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ITUPON_GEM: |
| switch (msg->subgroup) { |
| case BCMOLT_ITUPON_GEM_AUTO_SUBGROUP_CONFIGURATION_COMPLETED: |
| { |
| bcmolt_itupon_gem_configuration_completed *pkt = |
| (bcmolt_itupon_gem_configuration_completed*)msg; |
| bcmolt_itupon_gem_configuration_completed_data *pkt_data = |
| &((bcmolt_itupon_gem_configuration_completed*)msg)->data; |
| |
| gem_cfg_compltd_key key((uint32_t)pkt->key.pon_ni, (uint32_t) pkt->key.gem_port_id); |
| gem_cfg_complete_result res; |
| res.pon_intf_id = pkt->key.pon_ni; |
| res.gem_port_id = pkt->key.gem_port_id; |
| |
| pkt_data->status == BCMOLT_RESULT_SUCCESS ? res.status = GEM_CFG_STATUS_SUCCESS: res.status = GEM_CFG_STATUS_FAIL; |
| switch (pkt_data->new_state) { |
| case BCMOLT_ACTIVATION_STATE_NOT_CONFIGURED: |
| res.state = GEM_OBJECT_STATE_NOT_CONFIGURED; |
| break; |
| case BCMOLT_ACTIVATION_STATE_INACTIVE: |
| res.state = GEM_OBJECT_STATE_INACTIVE; |
| break; |
| case BCMOLT_ACTIVATION_STATE_PROCESSING: |
| res.state = GEM_OBJECT_STATE_PROCESSING; |
| break; |
| case BCMOLT_ACTIVATION_STATE_ACTIVE: |
| res.state = GEM_OBJECT_STATE_ACTIVE; |
| break; |
| default: |
| OPENOLT_LOG(ERROR, openolt_log_id, "invalid itu pon gem activation new_state, pon_intf %u, gem_port_id %u, new_state %d\n", |
| pkt->key.pon_ni, pkt->key.gem_port_id, pkt_data->new_state); |
| res.state = GEM_OBJECT_STATE_NOT_CONFIGURED; |
| } |
| OPENOLT_LOG(INFO, openolt_log_id, "received itu pon gem cfg complete ind, pon intf %u, gem_port_id %u, status %u, new_state %u\n", |
| pkt->key.pon_ni, pkt->key.gem_port_id, pkt_data->status, pkt_data->new_state); |
| |
| uint32_t gem_cfg_key_check_counter = 1; |
| std::map<gem_cfg_compltd_key, Queue<gem_cfg_complete_result> *>::iterator it; |
| while(true) { |
| bcmos_fastlock_lock(&gem_cfg_wait_lock); |
| // Push the result from BAL to queue |
| it = gem_cfg_compltd_map.find(key); |
| |
| if (it != gem_cfg_compltd_map.end()) { |
| bcmos_fastlock_unlock(&gem_cfg_wait_lock, 0); |
| break; |
| } else if (it == gem_cfg_compltd_map.end() && gem_cfg_key_check_counter < MAX_GEM_CFG_KEY_CHECK) { |
| /*During removal of gemport, indication from BAL arriving soon even before we start waiting for gemport cfg completion |
| by pushing empty cfg_result for gem_cfg_compltd_key. To handle this scenario delaying to push gem cfg completion indication |
| to Queue by 6ms.*/ |
| bcmos_fastlock_unlock(&gem_cfg_wait_lock, 0); |
| bcmos_usleep(6000); |
| } else { |
| // could be case of spurious aysnc response, OR, the application timed-out waiting for response and cleared the key. |
| bcmolt_msg_free(msg); |
| OPENOLT_LOG(ERROR, openolt_log_id, "gem config key not found for gem_port_id = %u, pon_intf = %u\n", pkt->key.gem_port_id, pkt->key.pon_ni); |
| bcmos_fastlock_unlock(&gem_cfg_wait_lock, 0); |
| return; |
| } |
| gem_cfg_key_check_counter++; |
| } |
| |
| bcmos_fastlock_lock(&gem_cfg_wait_lock); |
| if (it->second) { |
| // Push the result |
| it->second->push(res); |
| } |
| bcmos_fastlock_unlock(&gem_cfg_wait_lock, 0); |
| } |
| } |
| } |
| |
| bcmolt_msg_free(msg); |
| } |
| |
| static void FlowOperIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| OPENOLT_LOG(DEBUG, openolt_log_id, "flow oper state indication\n"); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void FlowIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| OPENOLT_LOG(DEBUG, openolt_log_id, "flow indication\n"); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void TmQIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| OPENOLT_LOG(DEBUG, openolt_log_id, "traffic mgmt queue indication\n"); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void TmSchedIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| OPENOLT_LOG(DEBUG, openolt_log_id, "traffic mgmt sheduler indication\n"); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void McastGroupIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| OPENOLT_LOG(DEBUG, openolt_log_id, "mcast group indication\n"); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuStartupFailureIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuStartupFailureIndication* sufi_ind = new openolt::OnuStartupFailureIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_SUFI: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_sufi*)msg)->key; |
| bcmolt_onu_sufi_data *data = &((bcmolt_onu_sufi*)msg)->data; |
| |
| OPENOLT_LOG(WARNING, openolt_log_id, "onu startup failure indication, intf_id %d, onu_id %d, alarm %d\n", |
| key->pon_ni, key->onu_id, data->alarm_status); |
| |
| sufi_ind->set_intf_id(key->pon_ni); |
| sufi_ind->set_onu_id(key->onu_id); |
| sufi_ind->set_status(alarm_status_to_string(data->alarm_status)); |
| alarm_ind->set_allocated_onu_startup_fail_ind(sufi_ind); |
| |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuSignalDegradeIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuSignalDegradeIndication* sdi_ind = new openolt::OnuSignalDegradeIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_SDI: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_sdi*)msg)->key; |
| bcmolt_onu_sdi_data *data = &((bcmolt_onu_sdi*)msg)->data; |
| |
| OPENOLT_LOG(WARNING, openolt_log_id, "onu signal degrade indication, intf_id %d, onu_id %d, alarm %d, BER %d\n", |
| key->pon_ni, key->onu_id, data->alarm_status, data->ber); |
| |
| sdi_ind->set_intf_id(key->pon_ni); |
| sdi_ind->set_onu_id(key->onu_id); |
| sdi_ind->set_status(alarm_status_to_string(data->alarm_status)); |
| sdi_ind->set_inverse_bit_error_rate(data->ber); |
| alarm_ind->set_allocated_onu_signal_degrade_ind(sdi_ind); |
| |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuDriftOfWindowIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuDriftOfWindowIndication* dowi_ind = new openolt::OnuDriftOfWindowIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_DOWI: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_dowi*)msg)->key; |
| bcmolt_onu_dowi_data *data = &((bcmolt_onu_dowi*)msg)->data; |
| |
| OPENOLT_LOG(WARNING, openolt_log_id, "onu drift of window indication, intf_id %d, onu_id %d, alarm %d, drift %d, new_eqd %d\n", |
| key->pon_ni, key->onu_id, data->alarm_status, data->drift_value, data->new_eqd); |
| |
| dowi_ind->set_intf_id(key->pon_ni); |
| dowi_ind->set_onu_id(key->onu_id); |
| dowi_ind->set_status(alarm_status_to_string(data->alarm_status)); |
| dowi_ind->set_drift(data->drift_value); |
| dowi_ind->set_new_eqd(data->new_eqd); |
| alarm_ind->set_allocated_onu_drift_of_window_ind(dowi_ind); |
| |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuLossOfOmciChannelIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuLossOfOmciChannelIndication* looci_ind = new openolt::OnuLossOfOmciChannelIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_LOOCI: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_looci*)msg)->key; |
| bcmolt_onu_looci_data *data = &((bcmolt_onu_looci*)msg)->data; |
| |
| OPENOLT_LOG(WARNING, openolt_log_id, "onu loss of OMCI channel indication, intf_id %d, onu_id %d, alarm %d\n", |
| key->pon_ni, key->onu_id, data->alarm_status); |
| |
| looci_ind->set_intf_id(key->pon_ni); |
| looci_ind->set_onu_id(key->onu_id); |
| looci_ind->set_status(alarm_status_to_string(data->alarm_status)); |
| alarm_ind->set_allocated_onu_loss_omci_ind(looci_ind); |
| |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuSignalsFailureIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuSignalsFailureIndication* sfi_ind = new openolt::OnuSignalsFailureIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_SFI: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_sfi*)msg)->key; |
| bcmolt_onu_sfi_data *data = &((bcmolt_onu_sfi*)msg)->data; |
| |
| OPENOLT_LOG(WARNING, openolt_log_id, "onu signals failure indication, intf_id %d, onu_id %d, alarm %d, BER %d\n", |
| key->pon_ni, key->onu_id, data->alarm_status, data->ber); |
| |
| sfi_ind->set_intf_id(key->pon_ni); |
| sfi_ind->set_onu_id(key->onu_id); |
| sfi_ind->set_status(alarm_status_to_string(data->alarm_status)); |
| sfi_ind->set_inverse_bit_error_rate(data->ber); |
| alarm_ind->set_allocated_onu_signals_fail_ind(sfi_ind); |
| |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuTransmissionInterferenceWarningIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuTransmissionInterferenceWarning* tiwi_ind = new openolt::OnuTransmissionInterferenceWarning; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_TIWI: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_tiwi*)msg)->key; |
| bcmolt_onu_tiwi_data *data = &((bcmolt_onu_tiwi*)msg)->data; |
| |
| OPENOLT_LOG(WARNING, openolt_log_id, "onu transmission interference warning indication, intf_id %d, onu_id %d, alarm %d, drift %d\n", |
| key->pon_ni, key->onu_id, data->alarm_status, data->drift_value); |
| |
| tiwi_ind->set_intf_id(key->pon_ni); |
| tiwi_ind->set_onu_id(key->onu_id); |
| tiwi_ind->set_status(alarm_status_to_string(data->alarm_status)); |
| tiwi_ind->set_drift(data->drift_value); |
| alarm_ind->set_allocated_onu_tiwi_ind(tiwi_ind); |
| |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuActivationCompletedIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::OnuIndication* onu_ind = new openolt::OnuIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_ONU_ACTIVATION_COMPLETED: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_onu_activation_completed*)msg)->key; |
| bcmolt_onu_onu_activation_completed_data*data = &((bcmolt_onu_onu_activation_completed*)msg)->data; |
| |
| onu_ind->set_intf_id(key->pon_ni); |
| onu_ind->set_onu_id(key->onu_id); |
| if (ONU_ACTIVATION_COMPLETED_SUCCESS(data->status)) |
| onu_ind->set_oper_state("up"); |
| if (ONU_ACTIVATION_COMPLETED_FAIL(data->status)) |
| onu_ind->set_oper_state("down"); |
| switch (data->fail_reason) { |
| case BCMOLT_ACTIVATION_FAIL_REASON_RANGING: |
| onu_ind->set_fail_reason(openolt::OnuIndication_ActivationFailReason_ONU_ACTIVATION_FAIL_REASON_RANGING); |
| break; |
| case BCMOLT_ACTIVATION_FAIL_REASON_PASSWORD_AUTHENTICATION: |
| onu_ind->set_fail_reason(openolt::OnuIndication_ActivationFailReason_ONU_ACTIVATION_FAIL_REASON_PASSWORD_AUTHENTICATION); |
| break; |
| case BCMOLT_ACTIVATION_FAIL_REASON_LOS: |
| onu_ind->set_fail_reason(openolt::OnuIndication_ActivationFailReason_ONU_ACTIVATION_FAIL_REASON_LOS); |
| break; |
| case BCMOLT_ACTIVATION_FAIL_REASON_ONU_ALARM: |
| onu_ind->set_fail_reason(openolt::OnuIndication_ActivationFailReason_ONU_ACTIVATION_FAIL_ONU_ALARM); |
| break; |
| case BCMOLT_ACTIVATION_FAIL_REASON_SWITCH_OVER: |
| onu_ind->set_fail_reason(openolt::OnuIndication_ActivationFailReason_ONU_ACTIVATION_FAIL_SWITCH_OVER); |
| break; |
| default: |
| onu_ind->set_fail_reason(openolt::OnuIndication_ActivationFailReason_ONU_ACTIVATION_FAIL_REASON_NONE); |
| } |
| // Setting the admin_state state field based on a valid onu_id does not make any sense. |
| // The adapter too does not seem to interpret this seriously. |
| // Legacy code, lets keep this as is for now. |
| (key->onu_id)?onu_ind->set_admin_state("up"):onu_ind->set_admin_state("down"); |
| ind.set_allocated_onu_ind(onu_ind); |
| OPENOLT_LOG(INFO, openolt_log_id, "onu indication, pon_ni %d, onu_id %d, onu_state %s, onu_admin %s\n", |
| key->pon_ni, key->onu_id, (data->status==BCMOLT_RESULT_SUCCESS)?"up":"down", |
| (key->onu_id)?"up":"down"); |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuLossOfKeySyncFailureIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuLossOfKeySyncFailureIndication* loss_of_sync_fail_ind = new openolt::OnuLossOfKeySyncFailureIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_LOKI: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_loki*)msg)->key; |
| bcmolt_onu_loki_data *data = &((bcmolt_onu_loki*)msg)->data; |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Got onu loss of key sync, intf_id %d, onu_id %d, alarm_status %d\n", |
| key->pon_ni, key->onu_id, data->alarm_status); |
| |
| loss_of_sync_fail_ind->set_intf_id(key->pon_ni); |
| loss_of_sync_fail_ind->set_onu_id(key->onu_id); |
| loss_of_sync_fail_ind->set_status(alarm_status_to_string(data->alarm_status)); |
| alarm_ind->set_allocated_onu_loss_of_sync_fail_ind(loss_of_sync_fail_ind); |
| |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuItuPonStatsAlarmRaisedIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuItuPonStatsIndication* onu_itu_pon_stats_ind = new openolt::OnuItuPonStatsIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_ITU_PON_STATS_ALARM_RAISED: |
| { |
| bcmolt_onu_key *onu_key = &((bcmolt_onu_itu_pon_stats_alarm_raised*)msg)->key; |
| bcmolt_onu_itu_pon_stats_alarm_raised_data *data = &((bcmolt_onu_itu_pon_stats_alarm_raised*)msg)->data; |
| |
| if (_BCMOLT_FIELD_MASK_BIT_IS_SET(data->presence_mask, BCMOLT_ONU_ITU_PON_STATS_ALARM_RAISED_DATA_ID_STAT)) { |
| switch (data->stat) |
| { |
| case BCMOLT_ONU_ITU_PON_STATS_DATA_ID_RDI_ERRORS: |
| uint64_t rdi_errors; |
| openolt::RdiErrorIndication* rdi_err_ind = new openolt::RdiErrorIndication; |
| rdi_errors = get_pon_stats_alarms_data(onu_key->pon_ni, onu_key->onu_id, data->stat); |
| onu_itu_pon_stats_ind->set_intf_id(onu_key->pon_ni); |
| onu_itu_pon_stats_ind->set_onu_id(onu_key->onu_id); |
| rdi_err_ind->set_rdi_error_count(rdi_errors); |
| rdi_err_ind->set_status("on"); |
| onu_itu_pon_stats_ind->set_allocated_rdi_error_ind(rdi_err_ind); |
| OPENOLT_LOG(INFO, openolt_log_id, "Got onu raised alarm indication, intf_id %d, onu_id %d, \ |
| rdi_errors %"PRIu64"\n", onu_key->pon_ni, onu_key->onu_id, rdi_errors); |
| alarm_ind->set_allocated_onu_itu_pon_stats_ind(onu_itu_pon_stats_ind); |
| break; |
| /* It is a further requirement |
| case BCMOLT_ONU_ITU_PON_STATS_DATA_ID_BIP_ERRORS: |
| uint64_t bip_errors; |
| bip_errors = get_pon_stats_alarms_data(onu_key->pon_ni, onu_key->onu_id, data->stat); |
| onu_itu_pon_stats_ind->set_intf_id(onu_key->pon_ni); |
| onu_itu_pon_stats_ind->set_onu_id(onu_key->onu_id); |
| OPENOLT_LOG(INFO, openolt_log_id, "Got onu raised alarm indication, intf_id %d, onu_id %d, \ |
| bip_errors %"PRIu64"\n", onu_key->pon_ni, onu_key->onu_id, bip_errors); |
| alarm_ind->set_allocated_onu_itu_pon_stats_ind(onu_itu_pon_stats_ind); |
| break; |
| */ |
| } |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuItuPonStatsAlarmClearedIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuItuPonStatsIndication* onu_itu_pon_stats_ind = new openolt::OnuItuPonStatsIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_ITU_PON_STATS_ALARM_CLEARED: |
| { |
| bcmolt_onu_key *onu_key = &((bcmolt_onu_itu_pon_stats_alarm_cleared*)msg)->key; |
| bcmolt_onu_itu_pon_stats_alarm_cleared_data *data = &((bcmolt_onu_itu_pon_stats_alarm_cleared*)msg)->data; |
| |
| if (_BCMOLT_FIELD_MASK_BIT_IS_SET(data->presence_mask, BCMOLT_ONU_ITU_PON_STATS_ALARM_CLEARED_DATA_ID_STAT)) { |
| switch (data->stat) |
| { |
| case BCMOLT_ONU_ITU_PON_STATS_DATA_ID_RDI_ERRORS: |
| uint64_t rdi_errors; |
| openolt::RdiErrorIndication* rdi_err_ind = new openolt::RdiErrorIndication; |
| |
| rdi_errors = get_pon_stats_alarms_data(onu_key->pon_ni, onu_key->onu_id, data->stat); |
| onu_itu_pon_stats_ind->set_intf_id(onu_key->pon_ni); |
| onu_itu_pon_stats_ind->set_onu_id(onu_key->onu_id); |
| rdi_err_ind->set_rdi_error_count(rdi_errors); |
| rdi_err_ind->set_status("off"); |
| onu_itu_pon_stats_ind->set_allocated_rdi_error_ind(rdi_err_ind); |
| OPENOLT_LOG(INFO, openolt_log_id, "Got onu cleared alarm indication, intf_id %d, onu_id %d, \ |
| rdi_errors %"PRIu64"\n", onu_key->pon_ni, onu_key->onu_id, rdi_errors); |
| alarm_ind->set_allocated_onu_itu_pon_stats_ind(onu_itu_pon_stats_ind); |
| break; |
| /* It is a further requirement |
| case BCMOLT_ONU_ITU_PON_STATS_DATA_ID_BIP_ERRORS: |
| uint64_t bip_errors; |
| bip_errors = get_pon_stats_alarms_data(onu_key->pon_ni, onu_key->onu_id, data->stat); |
| onu_itu_pon_stats_ind->set_intf_id(onu_key->pon_ni); |
| onu_itu_pon_stats_ind->set_onu_id(onu_key->onu_id); |
| onu_itu_pon_stats_ind->set_bip_errors(bip_errors); |
| OPENOLT_LOG(INFO, openolt_log_id, "Got onu cleared alarm indication, intf_id %d, onu_id %d, \ |
| bip_errors %"PRIu64"\n", onu_key->pon_ni, onu_key->onu_id, bip_errors); |
| alarm_ind->set_allocated_onu_itu_pon_stats_ind(onu_itu_pon_stats_ind); |
| break; |
| */ |
| } |
| ind.set_allocated_alarm_ind(alarm_ind); |
| } |
| } |
| } |
| } |
| |
| oltIndQ.push(ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuDeactivationCompletedIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| openolt::Indication ind; |
| |
| openolt::Indication onu_ind; |
| openolt::OnuIndication* onu_ind_data = new openolt::OnuIndication; |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_ONU_DEACTIVATION_COMPLETED: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_onu_deactivation_completed*)msg)->key; |
| bcmolt_onu_onu_deactivation_completed_data *data = |
| &((bcmolt_onu_onu_deactivation_completed*)msg)->data; |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Got onu deactivation, intf_id %d, onu_id %d, fail_reason %d, result_status %s\n", |
| key->pon_ni, key->onu_id, data->fail_reason, bcmolt_result_to_string(data->status).c_str()); |
| |
| onu_ind_data->set_intf_id(key->pon_ni); |
| onu_ind_data->set_onu_id(key->onu_id); |
| onu_ind_data->set_oper_state("down"); |
| onu_ind_data->set_admin_state("down"); |
| onu_ind.set_allocated_onu_ind(onu_ind_data); |
| |
| onu_deact_compltd_key onu_key((uint32_t)key->pon_ni, (uint32_t) key->onu_id); |
| onu_deactivate_complete_result res; |
| res.pon_intf_id = (uint32_t)key->pon_ni; |
| res.onu_id = (uint32_t) key->onu_id; |
| res.result = data->status; |
| res.reason = data->fail_reason; |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "received onu deactivate result, pon intf %u, onu_id %u, status %u, reason %u\n", |
| key->pon_ni, key->onu_id, data->status, data->fail_reason); |
| |
| bcmos_fastlock_lock(&onu_deactivate_wait_lock); |
| // Push the result from BAL to queue |
| std::map<onu_deact_compltd_key, Queue<onu_deactivate_complete_result> *>::iterator it = onu_deact_compltd_map.find(onu_key); |
| if (it == onu_deact_compltd_map.end()) { |
| // could be case of spurious aysnc response, OR, the application timed-out waiting for response and cleared the key. |
| // OR most importantly, could be a case of ONU going down (reboot, PON cable plug-out) where |
| // BCMOLT_ONU_AUTO_SUBGROUP_ONU_DEACTIVATION_COMPLETED is received without any explicit request from the application. |
| // The application has to take care handling spurious indications. |
| OPENOLT_LOG(WARNING, openolt_log_id, "onu deactivate completed key not found for pon intf %u, onu_id %u\n", |
| key->pon_ni, key->onu_id); |
| } |
| else if (it->second) { |
| // Push the result |
| it->second->push(res); |
| } |
| bcmos_fastlock_unlock(&onu_deactivate_wait_lock, 0); |
| } |
| } |
| } |
| |
| oltIndQ.push(onu_ind); |
| bcmolt_msg_free(msg); |
| } |
| |
| static void OnuRssiMeasurementCompletedIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_ONU: |
| switch (msg->subgroup) { |
| case BCMOLT_ONU_AUTO_SUBGROUP_RSSI_MEASUREMENT_COMPLETED: |
| { |
| bcmolt_onu_key *key = &((bcmolt_onu_rssi_measurement_completed*)msg)->key; |
| bcmolt_onu_rssi_measurement_completed_data *data = &((bcmolt_onu_rssi_measurement_completed*)msg)->data; |
| double rx_power_mean_dbm = 0.0; |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "ONU RSSI Measurement Completed indication - pon_id: %d, onu_id: %d, status: %d, fail_reason: %d\n", |
| key->pon_ni, key->onu_id, data->status, data->fail_reason); |
| |
| if (data->status == BCMOLT_RESULT_SUCCESS) { |
| auto trx_eeprom_reader = |
| #ifdef ASGVOLT64 |
| TrxEepromReader{TrxEepromReader::DEVICE_GPON, TrxEepromReader::RX_POWER, key->pon_ni}; |
| #else |
| TrxEepromReader{TrxEepromReader::DEVICE_XGSPON, TrxEepromReader::RX_POWER, key->pon_ni}; |
| #endif |
| auto power = trx_eeprom_reader.read_power_mean_dbm(); |
| |
| if (power.second) { |
| rx_power_mean_dbm = power.first.first; |
| OPENOLT_LOG(INFO, openolt_log_id, "ONU RSSI Measurement Completed indication - rx_power_mean_dbm: %f\n", rx_power_mean_dbm); |
| } else { |
| OPENOLT_LOG(ERROR, openolt_log_id, "ONU RSSI Measurement Completed indication - Rx power read failure\n"); |
| } |
| } else { |
| OPENOLT_LOG(ERROR, openolt_log_id, "ONU RSSI Measurement Completed indication - failure"); |
| } |
| |
| // for internal use insert into map |
| onu_rssi_compltd_key onu_key((uint32_t)key->pon_ni, (uint32_t)key->onu_id); |
| onu_rssi_complete_result res; |
| res.pon_intf_id = (uint32_t)key->pon_ni; |
| res.onu_id = (uint32_t)key->onu_id; |
| res.status = bcmolt_result_to_string(data->status); |
| res.reason = data->fail_reason; |
| res.rx_power_mean_dbm = rx_power_mean_dbm; |
| |
| bcmos_fastlock_lock(&onu_rssi_wait_lock); |
| auto it = onu_rssi_compltd_map.find(onu_key); |
| if (it == onu_rssi_compltd_map.end()) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "ONU RSSI Measurement Completed key not found for pon intf %u, onu_id %u\n", |
| key->pon_ni, key->onu_id); |
| } else if (it->second) { |
| it->second->push(res); |
| } else { |
| OPENOLT_LOG(WARNING, openolt_log_id, "ONU RSSI Measurement Completed queue not found for pon intf %u, onu_id %u\n", |
| key->pon_ni, key->onu_id); |
| } |
| bcmos_fastlock_unlock(&onu_rssi_wait_lock, 0); |
| } |
| } |
| } |
| |
| bcmolt_msg_free(msg); |
| } |
| |
| /* removed by BAL v3.0 |
| bcmos_errno OnuProcessingErrorIndication(bcmbal_obj *obj) { |
| openolt::Indication ind; |
| openolt::AlarmIndication* alarm_ind = new openolt::AlarmIndication; |
| openolt::OnuProcessingErrorIndication* onu_proc_error_ind = new openolt::OnuProcessingErrorIndication; |
| |
| bcmbal_subscriber_terminal_key *key = |
| &(((bcmbal_subscriber_terminal_processing_error*)obj)->key); |
| |
| OPENOLT_LOG(WARNING, openolt_log_id, "onu processing error indication, intf_id %d, onu_id %d\n", |
| key->intf_id, key->sub_term_id); |
| |
| onu_proc_error_ind->set_intf_id(key->intf_id); |
| onu_proc_error_ind->set_onu_id(key->sub_term_id); |
| |
| alarm_ind->set_allocated_onu_processing_error_ind(onu_proc_error_ind); |
| ind.set_allocated_alarm_ind(alarm_ind); |
| |
| oltIndQ.push(ind); |
| return BCM_ERR_OK; |
| } |
| */ |
| |
| static void GroupIndication(bcmolt_devid olt, bcmolt_msg *msg) { |
| |
| switch (msg->obj_type) { |
| case BCMOLT_OBJ_ID_GROUP: |
| switch (msg->subgroup) { |
| case BCMOLT_GROUP_AUTO_SUBGROUP_COMPLETE_MEMBERS_UPDATE: |
| { |
| bcmolt_group_key *key = &((bcmolt_group_complete_members_update*)msg)->key; |
| bcmolt_group_complete_members_update_data *data = |
| &((bcmolt_group_complete_members_update*)msg)->data; |
| |
| if (data->result == BCMOLT_RESULT_SUCCESS) { |
| OPENOLT_LOG(INFO, openolt_log_id, "Complete members update indication for group %d (successful)\n", key->id); |
| } else { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Complete members update indication for group %d (failed with reason %d)\n", key->id, data->fail_reason); |
| } |
| } |
| } |
| } |
| bcmolt_msg_free(msg); |
| } |
| |
| Status SubscribeIndication() { |
| bcmolt_rx_cfg rx_cfg = {}; |
| bcmos_errno rc; |
| |
| if (subscribed) { |
| return Status::OK; |
| } |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_DEVICE; |
| rx_cfg.rx_cb = OltOperIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_device_auto_subgroup_connection_complete; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, |
| "Olt connection complete state indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_DEVICE; |
| rx_cfg.rx_cb = OltOperIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_device_auto_subgroup_disconnection_complete; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, |
| "Olt disconnection complete state indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_DEVICE; |
| rx_cfg.rx_cb = OltOperIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_device_auto_subgroup_connection_failure; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, |
| "Olt connection failure state indication subscribe failed"); |
| |
| /* Interface LOS indication */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_PON_INTERFACE; |
| rx_cfg.rx_cb = LosIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_pon_interface_auto_subgroup_los; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "LOS indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_PON_INTERFACE; |
| rx_cfg.rx_cb = IfOperIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_pon_interface_auto_subgroup_state_change_completed; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, |
| "PON Interface operations state change indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_NNI_INTERFACE; |
| rx_cfg.rx_cb = IfOperIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_nni_interface_auto_subgroup_state_change; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, |
| "NNI Interface operations state change indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuAlarmIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_xgpon_alarm; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu alarm indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuAlarmIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_gpon_alarm; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu alarm indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuDyingGaspIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_dgi; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu dying-gasp indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_PON_INTERFACE; |
| rx_cfg.rx_cb = OnuDiscoveryIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_pon_interface_auto_subgroup_onu_discovered; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu discovery indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuStartupFailureIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_sufi; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, |
| "onu startup failure indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuSignalDegradeIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_sdi; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu sdi indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuDriftOfWindowIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_dowi; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu dowi indication subscribe failed"); |
| |
| /* LOOCI indication */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuLossOfOmciChannelIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_looci; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu looci indication subscribe failed"); |
| |
| /* SFI indication */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuSignalsFailureIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_sfi; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu sfi indication subscribe failed"); |
| |
| /* TIWI indication */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuTransmissionInterferenceWarningIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_tiwi; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu tiwi indication subscribe failed"); |
| |
| /* ONU Activation Completed Indication */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuActivationCompletedIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_onu_activation_completed; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, |
| "onu activation completed indication subscribe failed"); |
| |
| /* ONU Deactivation Completed Indication */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuDeactivationCompletedIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_onu_deactivation_completed; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, |
| "onu deactivation indication subscribe failed"); |
| |
| /* ONU Loss of Key Sync Indiction */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuLossOfKeySyncFailureIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_loki; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu loss of key sync indication subscribe failed"); |
| |
| /* ONU ITU-PON Raised Stats Indiction */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuItuPonStatsAlarmRaisedIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_itu_pon_stats_alarm_raised; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu itu-pon raised stats indication subscribe failed"); |
| |
| /* ONU ITU-PON Cleared Stats Indiction */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuItuPonStatsAlarmClearedIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_itu_pon_stats_alarm_cleared; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "onu itu-pon cleared stats indication subscribe failed"); |
| |
| /* Packet-In by Access_Control */ |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ACCESS_CONTROL; |
| rx_cfg.rx_cb = PacketIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_access_control_auto_subgroup_receive_eth_packet; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "Packet indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ITUPON_ALLOC; |
| rx_cfg.rx_cb = ItuPonAllocConfigCompletedInd; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_itupon_alloc_auto_subgroup_configuration_completed; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "ITU PON Alloc Configuration Complete Indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ITUPON_GEM; |
| rx_cfg.rx_cb = ItuPonGemConfigCompletedInd; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_itupon_gem_auto_subgroup_configuration_completed; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "ITU PON Gem Configuration Complete Indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_GROUP; |
| rx_cfg.rx_cb = GroupIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_group_auto_subgroup_complete_members_update; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "Complete members update indication subscribe failed"); |
| |
| rx_cfg.obj_type = BCMOLT_OBJ_ID_ONU; |
| rx_cfg.rx_cb = OnuRssiMeasurementCompletedIndication; |
| rx_cfg.flags = BCMOLT_AUTO_FLAGS_NONE; |
| rx_cfg.subgroup = bcmolt_onu_auto_subgroup_rssi_measurement_completed; |
| rc = bcmolt_ind_subscribe(current_device, &rx_cfg); |
| if(rc != BCM_ERR_OK) |
| return Status(grpc::StatusCode::INTERNAL, "ONU RSSI Measurement indication subscription failed"); |
| |
| subscribed = true; |
| |
| return Status::OK; |
| } |