agent/test/src/test_core.cc - openolt - Gitiles

 /*
  * Copyright 2018-present Open Networking Foundation

  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at

  * http://www.apache.org/licenses/LICENSE-2.0

  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include "gtest/gtest.h"
 #include "Queue.h"
 #include "bal_mocker.h"
 #include "core.h"
 #include "core_data.h"
 #include <future>
 using namespace testing;
 using namespace std;

 extern std::map<alloc_cfg_compltd_key,  Queue<alloc_cfg_complete_result> *> alloc_cfg_compltd_map;
 extern dev_log_id openolt_log_id;
 extern bcmos_fastlock alloc_cfg_wait_lock;
 extern bool ALLOC_CFG_FLAG;

 class TestOltEnable : public Test {
  protected:
   virtual void SetUp() {
   }

   virtual void TearDown() {
     // Code here will be called immediately after each test
     // (right before the destructor).
   }
 };

 // This is used to set custom bcmolt_cfg value to bcmolt_cfg pointer coming in
 // bcmolt_cfg_get__bal_state_stub.
 ACTION_P(SetArg1ToBcmOltCfg, value) { *static_cast<bcmolt_olt_cfg*>(arg1) = value; };

 // This is used to set custom bcmolt_onu_cfg value to bcmolt_onu_cfg pointer coming in
 // bcmolt_cfg_get__onu_state_stub.
 ACTION_P(SetArg1ToBcmOltOnuCfg, value) { *static_cast<bcmolt_onu_cfg*>(arg1) = value; };

 // This is used to set custom bcmolt_tm_sched_cfg value to bcmolt_tm_sched_cfg pointer coming in
 // bcmolt_cfg_get__tm_sched_stub.
 ACTION_P(SetArg1ToBcmOltTmSchedCfg, value) { *static_cast<bcmolt_tm_sched_cfg*>(arg1) = value; };

 // This is used to set custom bcmolt_pon_interface_cfg value to bcmolt_pon_interface_cfg pointer coming in
 // bcmolt_cfg_get__pon_intf_stub.
 ACTION_P(SetArg1ToBcmOltPonCfg, value) { *static_cast<bcmolt_pon_interface_cfg*>(arg1) = value; };

 // This is used to set custom bcmolt_nni_interface_cfg value to bcmolt_nni_interface_cfg pointer coming in
 // bcmolt_cfg_get__nni_intf_stub.
 ACTION_P(SetArg1ToBcmOltNniCfg, value) { *static_cast<bcmolt_nni_interface_cfg*>(arg1) = value; };

 // This is used to set custom bcmolt_flow_cfg value to bcmolt_flow_cfg pointer coming in
 // bcmolt_cfg_get__flow_stub.
 ACTION_P(SetArg1ToBcmOltFlowCfg, value) { *static_cast<bcmolt_flow_cfg*>(arg1) = value; };

 // Create a mock function for bcmolt_cfg_get__bal_state_stub C++ function
 MOCK_GLOBAL_FUNC2(bcmolt_cfg_get__bal_state_stub, bcmos_errno(bcmolt_oltid, void*));
 MOCK_GLOBAL_FUNC2(bcmolt_cfg_get__onu_state_stub, bcmos_errno(bcmolt_oltid, void*));
 MOCK_GLOBAL_FUNC2(bcmolt_cfg_get__tm_sched_stub, bcmos_errno(bcmolt_oltid, void*));
 MOCK_GLOBAL_FUNC2(bcmolt_cfg_get__pon_intf_stub, bcmos_errno(bcmolt_oltid, void*));
 MOCK_GLOBAL_FUNC2(bcmolt_cfg_get__nni_intf_stub, bcmos_errno(bcmolt_oltid, void*));
 MOCK_GLOBAL_FUNC2(bcmolt_cfg_get__flow_stub, bcmos_errno(bcmolt_oltid, void*));


 // Test Fixture for OltEnable

 // Test 1: OltEnableSuccess case
 TEST_F(TestOltEnable, OltEnableSuccess){
     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     bcmos_errno host_init_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_get_res = BCM_ERR_NOT_CONNECTED;
     bcmos_errno olt_oper_res = BCM_ERR_OK;

     bcmolt_olt_cfg olt_cfg = { };
     bcmolt_olt_key olt_key = { };
     BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key);
     olt_cfg.data.bal_state = BCMOLT_BAL_STATE_BAL_AND_SWITCH_READY;

     Status olt_enable_res;

     ON_CALL(balMock, bcmolt_host_init(_)).WillByDefault(Return(host_init_res));
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__bal_state_stub, bcmolt_cfg_get__bal_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltCfg(olt_cfg), Return(bal_cfg_get_stub_res)));
     EXPECT_CALL(balMock, bcmolt_cfg_get(_, _))
                          .Times(BCM_MAX_DEVS_PER_LINE_CARD)
                          .WillRepeatedly(Return(bal_cfg_get_res));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_res));

     olt_enable_res = Enable_(1, NULL);
     ASSERT_TRUE( olt_enable_res.error_message() == Status::OK.error_message() );
 }

 // Test 2: OltEnableFail_host_init_fail
 TEST_F(TestOltEnable, OltEnableFail_host_init_fail) {
     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     bcmos_errno host_init_res = BCM_ERR_INTERNAL;

     Status olt_enable_res;

     // Ensure that the state of the OLT is in deactivated to start with..
     state.deactivate();

     ON_CALL(balMock, bcmolt_host_init(_)).WillByDefault(Return(host_init_res));

     olt_enable_res = Enable_(1, NULL);
     ASSERT_TRUE( olt_enable_res.error_message() != Status::OK.error_message() );
 }

 // Test 3: OltEnableSuccess_PON_Device_Connected
 TEST_F(TestOltEnable, OltEnableSuccess_PON_Device_Connected) {

     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     bcmos_errno host_init_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_get_res = BCM_ERR_OK;
     bcmos_errno olt_oper_res = BCM_ERR_OK;

     bcmolt_olt_cfg olt_cfg = { };
     bcmolt_olt_key olt_key = { };
     BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key);
     olt_cfg.data.bal_state = BCMOLT_BAL_STATE_BAL_AND_SWITCH_READY;

     Status olt_enable_res;

     // Ensure that the state of the OLT is in deactivated to start with..
     state.deactivate();

     ON_CALL(balMock, bcmolt_host_init(_)).WillByDefault(Return(host_init_res));
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__bal_state_stub, bcmolt_cfg_get__bal_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltCfg(olt_cfg), Return(bal_cfg_get_stub_res)));
     EXPECT_CALL(balMock, bcmolt_cfg_get(_, _))
                          .Times(BCM_MAX_DEVS_PER_LINE_CARD)
                          .WillRepeatedly(Return(bal_cfg_get_res));

     olt_enable_res = Enable_(1, NULL);
     ASSERT_TRUE( olt_enable_res.error_message() == Status::OK.error_message() );

 }

 // Test 4: OltEnableFail_All_PON_Enable_Fail
 TEST_F(TestOltEnable, OltEnableFail_All_PON_Enable_Fail) {

     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     bcmos_errno host_init_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_get_res = BCM_ERR_NOT_CONNECTED;
     bcmos_errno olt_oper_res = BCM_ERR_INTERNAL;

     bcmolt_olt_cfg olt_cfg = { };
     bcmolt_olt_key olt_key = { };
     BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key);
     olt_cfg.data.bal_state = BCMOLT_BAL_STATE_BAL_AND_SWITCH_READY;

     Status olt_enable_res;

     // Ensure that the state of the OLT is in deactivated to start with..
     state.deactivate();

     ON_CALL(balMock, bcmolt_host_init(_)).WillByDefault(Return(host_init_res));
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__bal_state_stub, bcmolt_cfg_get__bal_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltCfg(olt_cfg), Return(bal_cfg_get_stub_res)));
     EXPECT_CALL(balMock, bcmolt_cfg_get(_, _))
                          .Times(BCM_MAX_DEVS_PER_LINE_CARD)
                          .WillRepeatedly(Return(bal_cfg_get_res));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_res));

     olt_enable_res = Enable_(1, NULL);

     ASSERT_TRUE( olt_enable_res.error_message() != Status::OK.error_message() );
 }

 // Test 5 OltEnableSuccess_One_PON_Enable_Fail : One PON device enable fails, but all others succeed.
 TEST_F(TestOltEnable, OltEnableSuccess_One_PON_Enable_Fail) {

     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     bcmos_errno host_init_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_get_res = BCM_ERR_NOT_CONNECTED;
     bcmos_errno olt_oper_res_fail = BCM_ERR_INTERNAL;
     bcmos_errno olt_oper_res_success = BCM_ERR_OK;

     bcmolt_olt_cfg olt_cfg = { };
     bcmolt_olt_key olt_key = { };
     BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key);
     olt_cfg.data.bal_state = BCMOLT_BAL_STATE_BAL_AND_SWITCH_READY;

     Status olt_enable_res;

     // Ensure that the state of the OLT is in deactivated to start with..
     state.deactivate();

     ON_CALL(balMock, bcmolt_host_init(_)).WillByDefault(Return(host_init_res));
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__bal_state_stub, bcmolt_cfg_get__bal_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltCfg(olt_cfg), Return(bal_cfg_get_stub_res)));
     EXPECT_CALL(balMock, bcmolt_cfg_get(_, _))
                          .Times(BCM_MAX_DEVS_PER_LINE_CARD)
                          .WillRepeatedly(Return(bal_cfg_get_res));
     // For the the first PON mac device, the activation result will fail, and will succeed for all other PON mac devices.
     EXPECT_CALL(balMock, bcmolt_oper_submit(_, _))
                          .WillOnce(Return(olt_oper_res_fail))
                          .WillRepeatedly(Return(olt_oper_res_success));
     olt_enable_res = Enable_(1, NULL);

     ASSERT_TRUE( olt_enable_res.error_message() == Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////
 // For testing Enable/Disable functionality
 ////////////////////////////////////////////////////////////////////////

 int num_of_pon_port = 16;

 // Create a mock function for bcmolt_cfg_get__olt_topology_stub C++ function
 MOCK_GLOBAL_FUNC2(bcmolt_cfg_get__olt_topology_stub, bcmos_errno(bcmolt_oltid, void*));

 class TestOltDisableReenable : public Test {
  protected:
   virtual void SetUp() {
     NiceMock<BalMocker> balMock;
     bcmos_errno bal_cfg_get_stub_res = BCM_ERR_OK;

     bcmolt_olt_cfg olt_cfg = { };
     bcmolt_olt_key olt_key = { };

     BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key);

     olt_cfg.data.topology.topology_maps.len = num_of_pon_port;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__olt_topology_stub, bcmolt_cfg_get__olt_topology_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltCfg(olt_cfg), Return(bal_cfg_get_stub_res)));

     ProbeDeviceCapabilities_();

   }

   virtual void TearDown() {
     // Code here will be called immediately after each test
     // (right before the destructor).
   }
 };


 // Test Fixture for OltDisable

 // Test 1: OltDisableSuccess  case
 TEST_F(TestOltDisableReenable, OltDisableSuccess){
     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     bcmos_errno olt_oper_res = BCM_ERR_OK;

     Status olt_disable_res;
     state.deactivate();
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_res));
     olt_disable_res = Disable_();
     ASSERT_TRUE( olt_disable_res.error_message() == Status::OK.error_message() );

 }

 // Test 2: OltDisableAllPonFailed  case
 TEST_F(TestOltDisableReenable, OltDisableAllPonFailed){
     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     bcmos_errno olt_oper_res = BCM_ERR_INTERNAL;

     Status olt_disable_res;
     state.deactivate();
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_res));
     olt_disable_res = Disable_();
     ASSERT_TRUE( olt_disable_res.error_code() == grpc::StatusCode::INTERNAL);
 }


 // Test Fixture for OltReenable

 // Test 1: OltReenableSuccess  case
 TEST_F(TestOltDisableReenable, OltReenableSuccess){
     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     uint32_t pon_id = 0;
     bcmos_errno olt_cfg_get_tmstub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     Status olt_reenable_res;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;

     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .Times(num_of_pon_port)
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     bcmolt_tm_sched_cfg tm_sched_cfg;
     bcmolt_tm_sched_key tm_sched_key = {.id = 1004};
     BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key);
     tm_sched_cfg.data.state = BCMOLT_CONFIG_STATE_NOT_CONFIGURED;

     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__tm_sched_stub, bcmolt_cfg_get__tm_sched_stub(_, _))
                      .Times(num_of_pon_port)
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltTmSchedCfg(tm_sched_cfg), Return(olt_cfg_get_tmstub_res)));

     olt_reenable_res = Reenable_();
     ASSERT_TRUE( olt_reenable_res.error_message() == Status::OK.error_message() );

 }

 // Test 2: OltReenableAllPonFailed case
 TEST_F(TestOltDisableReenable, OltReenableAllPonFailed){
     // NiceMock is used to suppress 'WillByDefault' return errors.
     // This is described in https://github.com/arangodb-helper/gtest/blob/master/googlemock/docs/CookBook.md
     NiceMock<BalMocker> balMock;
     uint32_t pon_id = 0;
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     bcmos_errno olt_oper_res = BCM_ERR_INTERNAL;
     Status olt_reenable_res;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;

     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .Times(num_of_pon_port)
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));
     EXPECT_CALL(balMock,bcmolt_oper_submit(_, _))
                          .Times(num_of_pon_port)
                          .WillRepeatedly(Return(olt_oper_res));

     olt_reenable_res = Reenable_();
     ASSERT_TRUE( olt_reenable_res.error_code() == grpc::StatusCode::INTERNAL);
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing ProbeDeviceCapabilities functionality
 ////////////////////////////////////////////////////////////////////////////
 class TestProbeDevCapabilities : public Test {
     protected:
         NiceMock<BalMocker> balMock;
         bcmos_errno olt_res_success = BCM_ERR_OK;
         bcmos_errno olt_res_fail = BCM_ERR_COMM_FAIL;
         bcmos_errno dev_res_success = BCM_ERR_OK;
         bcmos_errno dev_res_fail = BCM_ERR_COMM_FAIL;

         virtual void SetUp() {
             bcmos_errno bal_cfg_get_stub_res = BCM_ERR_OK;

             bcmolt_olt_cfg olt_cfg = { };
             bcmolt_olt_key olt_key = { };

             BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key);

             olt_cfg.data.topology.topology_maps.len = num_of_pon_port;
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - If querying the OLT fails, the method must return error
 TEST_F(TestProbeDevCapabilities, ProbeDev_OltQueryFailed) {

     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__olt_topology_stub, bcmolt_cfg_get__olt_topology_stub(_,_))
                      .WillOnce(Return(olt_res_fail));

     Status query_status = ProbeDeviceCapabilities_();
     ASSERT_TRUE( query_status.error_message() != Status::OK.error_message() );
 }

 // Test 2 - If all devices are queried successfully, the method must return Status::OK
 TEST_F(TestProbeDevCapabilities, ProbeDev_OltQuerySucceeded_DevQueriesSucceeded) {

     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__olt_topology_stub, bcmolt_cfg_get__olt_topology_stub(_,_))
                      .WillOnce(Return(olt_res_success));

     EXPECT_CALL(balMock, bcmolt_cfg_get(_, _))
         .WillRepeatedly(Return(dev_res_success));

     Status query_status = ProbeDeviceCapabilities_();

     ASSERT_TRUE( query_status.error_message() == Status::OK.error_message() );
 }

 // Test 3 - After successfully probing the OLT, even if probing all devices failed, the method must return error
 TEST_F(TestProbeDevCapabilities, ProbedDev_OltQuerySucceeded_AllDevQueriesFailed) {

     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__olt_topology_stub, bcmolt_cfg_get__olt_topology_stub(_,_))
                      .WillOnce(Return(olt_res_success));

     EXPECT_CALL(balMock, bcmolt_cfg_get(_, _))
         .WillRepeatedly(Return(dev_res_fail));

     Status query_status = ProbeDeviceCapabilities_();

     ASSERT_TRUE( query_status.error_message() != Status::OK.error_message() );
 }

 // Test 4 - After successfully probing the OLT, if probing some devices fail, the method returns success
 TEST_F(TestProbeDevCapabilities, ProbedDev_OltQuerySucceeded_SomeDevQueriesFailed) {

     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__olt_topology_stub, bcmolt_cfg_get__olt_topology_stub(_,_))
                      .WillOnce(Return(olt_res_success));

     EXPECT_CALL(balMock, bcmolt_cfg_get(_, _))
         .WillOnce(Return(olt_res_success))
         .WillRepeatedly(Return(dev_res_fail));

     Status query_status = ProbeDeviceCapabilities_();

     ASSERT_TRUE( query_status.error_message() == Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing EnablePonIf functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestEnablePonIf : public Test {
     protected:
         uint32_t pon_id = 0;
         NiceMock<BalMocker> balMock;

         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - EnablePonIf, Downstream DefaultSched & DefaultQueues creation success case
 TEST_F(TestEnablePonIf, EnablePonIfDefaultSchedQueuesSuccess) {
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_get_tmstub_res = BCM_ERR_OK;
     bcmos_errno olt_oper_sub_res = BCM_ERR_OK;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));

     bcmolt_tm_sched_cfg tm_sched_cfg;
     bcmolt_tm_sched_key tm_sched_key = {.id = 1004};
     BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key);
     tm_sched_cfg.data.state = BCMOLT_CONFIG_STATE_NOT_CONFIGURED;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__tm_sched_stub, bcmolt_cfg_get__tm_sched_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltTmSchedCfg(tm_sched_cfg), Return(olt_cfg_get_tmstub_res)));

     Status status = EnablePonIf_(pon_id);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - EnablePonIf success but Downstream DefaultSched Query failure case
 TEST_F(TestEnablePonIf, EnablePonIfSuccessDefaultSchedQueryFailure) {
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_get_tmstub_res = BCM_ERR_INTERNAL;
     bcmos_errno olt_oper_sub_res = BCM_ERR_OK;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));

     bcmolt_tm_sched_cfg tm_sched_cfg;
     bcmolt_tm_sched_key tm_sched_key = {.id = 1004};
     BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key);
     tm_sched_cfg.data.state = BCMOLT_CONFIG_STATE_CONFIGURED;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__tm_sched_stub, bcmolt_cfg_get__tm_sched_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltTmSchedCfg(tm_sched_cfg), Return(olt_cfg_get_tmstub_res)));

     Status status = EnablePonIf_(pon_id);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 3 - EnablePonIf success but Downstream DefaultSched already in Configured state
 TEST_F(TestEnablePonIf, EnablePonIfSuccessDefaultSchedAlreadyConfigured) {
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_get_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_get_tmstub_res = BCM_ERR_OK;
     bcmos_errno olt_oper_sub_res = BCM_ERR_OK;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));
     ON_CALL(balMock, bcmolt_cfg_get(_, _)).WillByDefault(Return(olt_cfg_get_res));

     bcmolt_tm_sched_cfg tm_sched_cfg;
     bcmolt_tm_sched_key tm_sched_key = {.id = 1004};
     BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key);
     tm_sched_cfg.data.state = BCMOLT_CONFIG_STATE_CONFIGURED;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__tm_sched_stub, bcmolt_cfg_get__tm_sched_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltTmSchedCfg(tm_sched_cfg), Return(olt_cfg_get_tmstub_res)));

     Status status = EnablePonIf_(pon_id);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 4 - EnablePonIf success but Downstream DefaultSched & DefaultQueues creation failed
 TEST_F(TestEnablePonIf, EnablePonIfSuccessDefaultSchedQueuesFailed) {
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_err = BCM_ERR_INTERNAL;
     bcmos_errno olt_cfg_get_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_get_tmstub_res = BCM_ERR_OK;
     bcmos_errno olt_oper_sub_res = BCM_ERR_OK;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     EXPECT_CALL(balMock, bcmolt_cfg_set(_, _))
                          .WillOnce(Return(olt_cfg_set_res))
                          .WillRepeatedly(Return(olt_cfg_set_err));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));
     ON_CALL(balMock, bcmolt_cfg_get(_, _)).WillByDefault(Return(olt_cfg_get_res));

     bcmolt_tm_sched_cfg tm_sched_cfg;
     bcmolt_tm_sched_key tm_sched_key = {.id = 1004};
     BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key);
     tm_sched_cfg.data.state = BCMOLT_CONFIG_STATE_NOT_CONFIGURED;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__tm_sched_stub, bcmolt_cfg_get__tm_sched_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltTmSchedCfg(tm_sched_cfg), Return(olt_cfg_get_tmstub_res)));

     Status status = EnablePonIf_(pon_id);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 5 - EnablePonIf already enabled success
 TEST_F(TestEnablePonIf, EnablePonIfAlreadyEnabled) {
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_ACTIVE_WORKING;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     Status status = EnablePonIf_(pon_id);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 6 - EnablePonIf - enable onu discovery failure case
 TEST_F(TestEnablePonIf, EnablePonIfEnableOnuDiscFailed) {
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_INTERNAL;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = EnablePonIf_(pon_id);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 7 - EnablePonIf failure case
 TEST_F(TestEnablePonIf, EnablePonIfFailed) {
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     bcmos_errno olt_oper_sub_res = BCM_ERR_INTERNAL;

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));

     Status status = EnablePonIf_(pon_id);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing SetStateUplinkIf functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestSetStateUplinkIf : public Test {
     protected:
         uint32_t intf_id = 0;
         NiceMock<BalMocker> balMock;

         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - SetStateUplinkIf NNI intf already enabled, Upstream DefaultSched & DefaultQueues creation success case
 TEST_F(TestSetStateUplinkIf, SetStateUplinkIfAlreadyEnabledDefaultSchedQueuesSuccess) {
     bcmos_errno olt_cfg_get_nni_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_get_tmstub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;

     bcmolt_nni_interface_key nni_key;
     bcmolt_nni_interface_cfg nni_cfg;
     nni_key.id = intf_id;
     BCMOLT_CFG_INIT(&nni_cfg, nni_interface, nni_key);
     nni_cfg.data.state = BCMOLT_INTERFACE_STATE_ACTIVE_WORKING;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__nni_intf_stub, bcmolt_cfg_get__nni_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltNniCfg(nni_cfg), Return(olt_cfg_get_nni_stub_res)));

     bcmolt_tm_sched_cfg tm_sched_cfg;
     bcmolt_tm_sched_key tm_sched_key = {.id = 1004};
     BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key);
     tm_sched_cfg.data.state = BCMOLT_CONFIG_STATE_NOT_CONFIGURED;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__tm_sched_stub, bcmolt_cfg_get__tm_sched_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltTmSchedCfg(tm_sched_cfg), Return(olt_cfg_get_tmstub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = SetStateUplinkIf_(intf_id, true);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - SetStateUplinkIf, NNI interface already disabled case
 TEST_F(TestSetStateUplinkIf, SetStateUplinkIfAlreadyDisabled) {
     bcmos_errno olt_cfg_get_nni_stub_res = BCM_ERR_OK;

     bcmolt_nni_interface_key nni_key;
     bcmolt_nni_interface_cfg nni_cfg;
     nni_key.id = intf_id;
     BCMOLT_CFG_INIT(&nni_cfg, nni_interface, nni_key);
     nni_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__nni_intf_stub, bcmolt_cfg_get__nni_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltNniCfg(nni_cfg), Return(olt_cfg_get_nni_stub_res)));

     Status status = SetStateUplinkIf_(intf_id, false);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 3 - SetStateUplinkIf Enable success, Upstream DefaultSched & DefaultQueues creation success case
 TEST_F(TestSetStateUplinkIf, SetStateUplinkIfDefaultSchedQueuesSuccess) {
     bcmos_errno olt_cfg_get_nni_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_get_tmstub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     bcmos_errno olt_oper_sub_res = BCM_ERR_OK;

     bcmolt_nni_interface_key nni_key;
     bcmolt_nni_interface_cfg nni_cfg;
     nni_key.id = intf_id;
     BCMOLT_CFG_INIT(&nni_cfg, nni_interface, nni_key);
     nni_cfg.data.state = BCMOLT_INTERFACE_STATE__BEGIN;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__nni_intf_stub, bcmolt_cfg_get__nni_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltNniCfg(nni_cfg), Return(olt_cfg_get_nni_stub_res)));

     bcmolt_tm_sched_cfg tm_sched_cfg;
     bcmolt_tm_sched_key tm_sched_key = {.id = 1004};
     BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key);
     tm_sched_cfg.data.state = BCMOLT_CONFIG_STATE_NOT_CONFIGURED;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__tm_sched_stub, bcmolt_cfg_get__tm_sched_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltTmSchedCfg(tm_sched_cfg), Return(olt_cfg_get_tmstub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));

     Status status = SetStateUplinkIf_(intf_id, true);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 4 - SetStateUplinkIf Enable failure case
 TEST_F(TestSetStateUplinkIf, SetStateUplinkIfEnableFailure) {
     bcmos_errno olt_cfg_get_nni_stub_res = BCM_ERR_OK;
     bcmos_errno olt_oper_sub_res = BCM_ERR_INTERNAL;

     bcmolt_nni_interface_key nni_key;
     bcmolt_nni_interface_cfg nni_cfg;
     nni_key.id = intf_id;
     BCMOLT_CFG_INIT(&nni_cfg, nni_interface, nni_key);
     nni_cfg.data.state = BCMOLT_INTERFACE_STATE__BEGIN;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__nni_intf_stub, bcmolt_cfg_get__nni_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltNniCfg(nni_cfg), Return(olt_cfg_get_nni_stub_res)));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));

     Status status = SetStateUplinkIf_(intf_id, true);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 5 - SetStateUplinkIf Disable success case
 TEST_F(TestSetStateUplinkIf, SetStateUplinkIfDisableSuccess) {
     bcmos_errno olt_cfg_get_nni_stub_res = BCM_ERR_OK;
     bcmos_errno olt_oper_sub_res = BCM_ERR_OK;

     bcmolt_nni_interface_key nni_key;
     bcmolt_nni_interface_cfg nni_cfg;
     nni_key.id = intf_id;
     BCMOLT_CFG_INIT(&nni_cfg, nni_interface, nni_key);
     nni_cfg.data.state = BCMOLT_INTERFACE_STATE_ACTIVE_WORKING;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__nni_intf_stub, bcmolt_cfg_get__nni_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltNniCfg(nni_cfg), Return(olt_cfg_get_nni_stub_res)));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));

     Status status = SetStateUplinkIf_(intf_id, false);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 6 - SetStateUplinkIf Disable failure case
 TEST_F(TestSetStateUplinkIf, SetStateUplinkIfDisableFailure) {
     bcmos_errno olt_cfg_get_nni_stub_res = BCM_ERR_OK;
     bcmos_errno olt_oper_sub_res = BCM_ERR_INTERNAL;

     bcmolt_nni_interface_key nni_key;
     bcmolt_nni_interface_cfg nni_cfg;
     nni_key.id = intf_id;
     BCMOLT_CFG_INIT(&nni_cfg, nni_interface, nni_key);
     nni_cfg.data.state = BCMOLT_INTERFACE_STATE_ACTIVE_WORKING;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__nni_intf_stub, bcmolt_cfg_get__nni_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltNniCfg(nni_cfg), Return(olt_cfg_get_nni_stub_res)));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_sub_res));

     Status status = SetStateUplinkIf_(intf_id, false);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing DisablePonIf functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestDisablePonIf : public Test {
     protected:
         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - DisablePonIf success case
 TEST_F(TestDisablePonIf, DisablePonIfSuccess) {
     bcmos_errno olt_oper_res = BCM_ERR_OK;
     bcmos_errno bal_cfg_set_res = BCM_ERR_OK;
     NiceMock<BalMocker> balMock;
     uint32_t pon_id=1;

     //ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(bal_cfg_set_res));
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_res));
     state.deactivate();
     Status status = DisablePonIf_(pon_id);

     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - DisablePonIf Failure case
 TEST_F(TestDisablePonIf, DisablePonIfFailed) {
     bcmos_errno olt_oper_res = BCM_ERR_INTERNAL;
     NiceMock<BalMocker> balMock;
     uint32_t pon_id=1;

     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(olt_oper_res));
     state.deactivate();
     Status status = DisablePonIf_(pon_id);

     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 3 - DisablePonIf ONU discovery failure case
 TEST_F(TestDisablePonIf, DisablePonIfOnuDiscoveryFail) {
     NiceMock<BalMocker> balMock;
     uint32_t pon_id=1;
     bcmos_errno bal_cfg_set_res= BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(bal_cfg_set_res));
     state.deactivate();
     Status status = DisablePonIf_(pon_id);

     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing ActivateOnu functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestActivateOnu : public Test {
     protected:
         uint32_t pon_id = 0;
         uint32_t onu_id = 1;
         std::string vendor_id = "TWSH";
         std::string vendor_specific = "80808080";
         uint32_t pir = 1000000;
         NiceMock<BalMocker> balMock;

         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - ActivateOnu success case
 TEST_F(TestActivateOnu, ActivateOnuSuccess) {
     bcmos_errno onu_cfg_get_res = BCM_ERR_INTERNAL;
     bcmos_errno onu_cfg_get_stub_res = BCM_ERR_INTERNAL;
     bcmos_errno onu_cfg_set_res = BCM_ERR_OK;

     bcmolt_onu_cfg onu_cfg;
     bcmolt_onu_key onu_key;
     BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key);
     onu_cfg.data.onu_state = BCMOLT_ONU_STATE_ACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__onu_state_stub, bcmolt_cfg_get__onu_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltOnuCfg(onu_cfg), Return(onu_cfg_get_stub_res)));

     ON_CALL(balMock, bcmolt_cfg_get(_, _)).WillByDefault(Return(onu_cfg_get_res));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(onu_cfg_set_res));

     Status status = ActivateOnu_(pon_id, onu_id, vendor_id.c_str(), vendor_specific.c_str(), pir);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - ActivateOnu failure case
 TEST_F(TestActivateOnu, ActivateOnuFailure) {
     bcmos_errno onu_cfg_get_res = BCM_ERR_INTERNAL;
     bcmos_errno onu_cfg_get_stub_res = BCM_ERR_INTERNAL;
     bcmos_errno onu_cfg_set_res = BCM_ERR_INTERNAL;

     bcmolt_onu_cfg onu_cfg;
     bcmolt_onu_key onu_key;
     BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key);
     onu_cfg.data.onu_state = BCMOLT_ONU_STATE_ACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__onu_state_stub, bcmolt_cfg_get__onu_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltOnuCfg(onu_cfg), Return(onu_cfg_get_stub_res)));

     ON_CALL(balMock, bcmolt_cfg_get(_, _)).WillByDefault(Return(onu_cfg_get_res));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(onu_cfg_set_res));

     Status status = ActivateOnu_(pon_id, onu_id, vendor_id.c_str(), vendor_specific.c_str(), pir);
     ASSERT_FALSE( status.error_message() == Status::OK.error_message() );
 }

 // Test 3 - ActivateOnu - Onu already under processing case
 TEST_F(TestActivateOnu, ActivateOnuProcessing) {
     bcmos_errno onu_cfg_get_res = BCM_ERR_OK;
     bcmos_errno onu_cfg_get_stub_res = BCM_ERR_OK;

     bcmolt_onu_cfg onu_cfg;
     bcmolt_onu_key onu_key;
     BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key);
     onu_cfg.data.onu_state = BCMOLT_ONU_STATE_ACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__onu_state_stub, bcmolt_cfg_get__onu_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltOnuCfg(onu_cfg), Return(onu_cfg_get_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_get(_, _)).WillByDefault(Return(onu_cfg_get_res));

     Status status = ActivateOnu_(pon_id, onu_id, vendor_id.c_str(), vendor_specific.c_str(), pir);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing DeactivateOnu functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestDeactivateOnu : public Test {
     protected:
         uint32_t pon_id = 0;
         uint32_t onu_id = 1;
         std::string vendor_id = "TWSH";
         std::string vendor_specific = "80808080";
         NiceMock<BalMocker> balMock;

         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - DeactivateOnu success case
 TEST_F(TestDeactivateOnu, DeactivateOnuSuccess) {
     bcmos_errno onu_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno onu_oper_sub_res = BCM_ERR_OK;

     bcmolt_onu_cfg onu_cfg;
     bcmolt_onu_key onu_key;
     BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key);
     onu_cfg.data.onu_state = BCMOLT_ONU_STATE_ACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__onu_state_stub, bcmolt_cfg_get__onu_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltOnuCfg(onu_cfg), Return(onu_cfg_get_stub_res)));

     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));

     Status status = DeactivateOnu_(pon_id, onu_id, vendor_id.c_str(), vendor_specific.c_str());
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - DeactivateOnu failure case
 TEST_F(TestDeactivateOnu, DeactivateOnuFailure) {
     bcmos_errno onu_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno onu_oper_sub_res = BCM_ERR_INTERNAL;

     bcmolt_onu_cfg onu_cfg;
     bcmolt_onu_key onu_key;
     BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key);
     onu_cfg.data.onu_state = BCMOLT_ONU_STATE_ACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__onu_state_stub, bcmolt_cfg_get__onu_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltOnuCfg(onu_cfg), Return(onu_cfg_get_stub_res)));

     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));

     Status status = DeactivateOnu_(pon_id, onu_id, vendor_id.c_str(), vendor_specific.c_str());
     ASSERT_FALSE( status.error_message() == Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing DeleteOnu functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestDeleteOnu : public Test {
     protected:
         uint32_t pon_id = 0;
         uint32_t onu_id = 1;
         std::string vendor_id = "TWSH";
         std::string vendor_specific = "80808080";
         NiceMock<BalMocker> balMock;

         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - DeleteOnu success case
 TEST_F(TestDeleteOnu, DeleteOnuSuccess) {
     bcmos_errno onu_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno onu_oper_sub_res = BCM_ERR_OK;
     bcmos_errno onu_cfg_clear_res = BCM_ERR_OK;

     bcmolt_onu_cfg onu_cfg;
     bcmolt_onu_key onu_key;
     BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key);
     onu_cfg.data.onu_state = BCMOLT_ONU_STATE_ACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__onu_state_stub, bcmolt_cfg_get__onu_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltOnuCfg(onu_cfg), Return(onu_cfg_get_stub_res)));

     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(onu_cfg_clear_res));

     Status status = DeleteOnu_(pon_id, onu_id, vendor_id.c_str(), vendor_specific.c_str());
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - DeleteOnu failure case
 TEST_F(TestDeleteOnu, DeleteOnuFailure) {
     bcmos_errno onu_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno onu_oper_sub_res = BCM_ERR_OK;
     bcmos_errno onu_cfg_clear_res = BCM_ERR_INTERNAL;

     bcmolt_onu_cfg onu_cfg;
     bcmolt_onu_key onu_key;
     BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key);
     onu_cfg.data.onu_state = BCMOLT_ONU_STATE_ACTIVE;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__onu_state_stub, bcmolt_cfg_get__onu_state_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltOnuCfg(onu_cfg), Return(onu_cfg_get_stub_res)));

     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(onu_cfg_clear_res));

     Status status = DeleteOnu_(pon_id, onu_id, vendor_id.c_str(), vendor_specific.c_str());
     ASSERT_FALSE( status.error_message() == Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing OmciMsgOut functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestOmciMsgOut : public Test {
     protected:
         uint32_t pon_id = 0;
         uint32_t onu_id = 1;
         std::string pkt = "omci-pkt";
         NiceMock<BalMocker> balMock;

         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - OmciMsgOut success case
 TEST_F(TestOmciMsgOut, OmciMsgOutSuccess) {
     bcmos_errno onu_oper_sub_res = BCM_ERR_OK;

     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));

     Status status = OmciMsgOut_(pon_id, onu_id, pkt);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 1 - OmciMsgOut failure case
 TEST_F(TestOmciMsgOut, OmciMsgOutFailure) {
     bcmos_errno onu_oper_sub_res = BCM_ERR_INTERNAL;

     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));

     Status status = OmciMsgOut_(pon_id, onu_id, pkt);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 #if 0
 ////////////////////////////////////////////////////////////////////////////
 // For testing FlowAdd functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestFlowAdd : public Test {
     protected:
         int32_t access_intf_id = 0;
         int32_t onu_id = 1;
         int32_t uni_id = 0;
         uint32_t port_no = 16;
         uint32_t flow_id = 1;
         std::string flow_type = "upstream";
         int32_t alloc_id = 1024;
         int32_t network_intf_id = 0;
         int32_t gemport_id = 1024;
         int32_t priority_value = 0;
         uint64_t cookie = 0;

         NiceMock<BalMocker> balMock;
         openolt::Flow* flow;
         openolt::Classifier* classifier;
         openolt::Action* action;
         openolt::ActionCmd* cmd;

         bcmolt_flow_key flow_key;
         bcmolt_flow_cfg flow_cfg;

         tech_profile::TrafficQueues* traffic_queues;
         tech_profile::TrafficQueue* traffic_queue_1;
         tech_profile::TrafficQueue* traffic_queue_2;
         tech_profile::DiscardConfig* discard_config_1;
         tech_profile::DiscardConfig* discard_config_2;
         tech_profile::TailDropDiscardConfig* tail_drop_discard_config_1;
         tech_profile::TailDropDiscardConfig* tail_drop_discard_config_2;


         virtual void SetUp() {
             classifier = new openolt::Classifier;
             action = new openolt::Action;
             cmd = new openolt::ActionCmd;

             classifier->set_o_tpid(0);
             classifier->set_o_vid(7);
             classifier->set_i_tpid(0);
             classifier->set_i_vid(0);
             classifier->set_o_pbits(0);
             classifier->set_i_pbits(0);
             classifier->set_eth_type(0);
             classifier->set_ip_proto(0);
             classifier->set_src_port(0);
             classifier->set_dst_port(0);
             classifier->set_pkt_tag_type("single_tag");

             action->set_o_vid(12);
             action->set_o_pbits(0);
             action->set_o_tpid(0);
             action->set_i_vid(0);
             action->set_i_pbits(0);
             action->set_i_tpid(0);

             cmd->set_add_outer_tag(true);
             cmd->set_remove_outer_tag(false);
             cmd->set_trap_to_host(false);
             action->set_allocated_cmd(cmd);

             flow_key.flow_id = 1;
             flow_key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM;
             BCMOLT_CFG_INIT(&flow_cfg, flow, flow_key);
             flow_cfg.data.onu_id=1;
             flow_cfg.key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM;
             flow_cfg.data.svc_port_id=1024;
             flow_cfg.data.priority=0;
             flow_cfg.data.cookie=0;
             flow_cfg.data.ingress_intf.intf_type=BCMOLT_FLOW_INTERFACE_TYPE_PON;
             flow_cfg.data.egress_intf.intf_type=BCMOLT_FLOW_INTERFACE_TYPE_NNI;
             flow_cfg.data.ingress_intf.intf_id=0;
             flow_cfg.data.egress_intf.intf_id=0;
             flow_cfg.data.classifier.o_vid=7;
             flow_cfg.data.classifier.o_pbits=0;
             flow_cfg.data.classifier.i_vid=0;
             flow_cfg.data.classifier.i_pbits=0;
             flow_cfg.data.classifier.ether_type=0;
             flow_cfg.data.classifier.ip_proto=0;
             flow_cfg.data.classifier.src_port=0;
             flow_cfg.data.classifier.dst_port=0;
             flow_cfg.data.classifier.pkt_tag_type=BCMOLT_PKT_TAG_TYPE_SINGLE_TAG;
             flow_cfg.data.egress_qos.type=BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE;
             flow_cfg.data.egress_qos.u.fixed_queue.queue_id=0;
             flow_cfg.data.egress_qos.tm_sched.id=1020;
             flow_cfg.data.action.cmds_bitmask=BCMOLT_ACTION_CMD_ID_ADD_OUTER_TAG;
             flow_cfg.data.action.o_vid=12;
             flow_cfg.data.action.o_pbits=0;
             flow_cfg.data.action.i_vid=0;
             flow_cfg.data.action.i_pbits=0;
             flow_cfg.data.state=BCMOLT_FLOW_STATE_ENABLE;

             traffic_queues = new tech_profile::TrafficQueues;
             traffic_queues->set_intf_id(0);
             traffic_queues->set_onu_id(2);
             traffic_queue_1 = traffic_queues->add_traffic_queues();
             traffic_queue_1->set_gemport_id(1024);
             traffic_queue_1->set_pbit_map("0b00000101");
             traffic_queue_1->set_aes_encryption(true);
             traffic_queue_1->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
             traffic_queue_1->set_priority(0);
             traffic_queue_1->set_weight(0);
             traffic_queue_1->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
             discard_config_1 = new tech_profile::DiscardConfig;
             discard_config_1->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
             tail_drop_discard_config_1 = new tech_profile::TailDropDiscardConfig;
             tail_drop_discard_config_1->set_queue_size(8);
             discard_config_1->set_allocated_tail_drop_discard_config(tail_drop_discard_config_1);
             traffic_queue_1->set_allocated_discard_config(discard_config_1);

             traffic_queues->set_uni_id(0);
             traffic_queues->set_port_no(16);

             traffic_queue_2 = traffic_queues->add_traffic_queues();
             traffic_queue_2->set_gemport_id(1025);
             traffic_queue_2->set_pbit_map("0b00001010");
             traffic_queue_2->set_aes_encryption(true);
             traffic_queue_2->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
             traffic_queue_2->set_priority(1);
             traffic_queue_2->set_weight(0);
             traffic_queue_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
             discard_config_2 = new tech_profile::DiscardConfig;
             discard_config_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
             tail_drop_discard_config_2 = new tech_profile::TailDropDiscardConfig;
             tail_drop_discard_config_2->set_queue_size(8);
             discard_config_2->set_allocated_tail_drop_discard_config(tail_drop_discard_config_2);
             traffic_queue_2->set_allocated_discard_config(discard_config_2);
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - FlowAdd - success case(HSIA-upstream FixedQueue)
 TEST_F(TestFlowAdd, FlowAddHsiaFixedQueueUpstreamSuccess) {
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - FlowAdd - Duplicate Flow case
 TEST_F(TestFlowAdd, FlowAddHsiaFixedQueueUpstreamDuplicate) {
     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 3 - FlowAdd - Failure case(bcmolt_cfg_set returns error)
 TEST_F(TestFlowAdd, FlowAddHsiaFixedQueueUpstreamFailure) {
     gemport_id = 1025;

     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_INTERNAL;

     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 4 - FlowAdd - Failure case(Invalid flow direction)
 TEST_F(TestFlowAdd, FlowAddFailureInvalidFlowDirection) {
     flow_type = "bidirectional";

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 5 - FlowAdd - Failure case(Invalid network setting)
 TEST_F(TestFlowAdd, FlowAddFailureInvalidNWCfg) {
     network_intf_id = -1;

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 6 - FlowAdd - Success case(Single tag & EAP Ether type)
 TEST_F(TestFlowAdd, FlowAddEapEtherTypeSuccess) {
     flow_id = 2;

     classifier->set_eth_type(34958);
     cmd->set_add_outer_tag(false);
     cmd->set_trap_to_host(true);
     action->set_allocated_cmd(cmd);

     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 7 - FlowAdd - Success case(Single tag & DHCP flow)
 TEST_F(TestFlowAdd, FlowAddDhcpSuccess) {
     flow_id = 3;
     gemport_id = 1025;

     classifier->set_ip_proto(17);
     classifier->set_src_port(68);
     classifier->set_dst_port(67);
     cmd->set_add_outer_tag(false);
     cmd->set_trap_to_host(true);
     action->set_allocated_cmd(cmd);

     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 8 - FlowAdd - success case(HSIA-downstream FixedQueue)
 TEST_F(TestFlowAdd, FlowAddHsiaFixedQueueDownstreamSuccess) {
     flow_id = 4;
     flow_type = "downstream";

     classifier->set_o_vid(12);
     classifier->set_i_vid(7);
     classifier->set_pkt_tag_type("double_tag");
     action->set_o_vid(0);
     cmd->set_add_outer_tag(false);
     cmd->set_remove_outer_tag(true);
     action->set_allocated_cmd(cmd);

     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 9 - FlowAdd - success case(HSIA-upstream PriorityQueue)
 TEST_F(TestFlowAdd, FlowAddHsiaPriorityQueueUpstreamSuccess) {
     onu_id = 2;
     flow_id = 5;
     alloc_id = 1025;

     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_queue_2->set_direction(tech_profile::Direction::UPSTREAM);

     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));
     CreateTrafficQueues_(traffic_queues);

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 10 - FlowAdd - success case(HSIA-downstream PriorityQueue)
 TEST_F(TestFlowAdd, FlowAddHsiaPriorityQueueDownstreamSuccess) {
     onu_id = 2;
     flow_id = 6;
     flow_type = "downstream";
     alloc_id = 1025;

     classifier->set_o_vid(12);
     classifier->set_i_vid(7);
     classifier->set_pkt_tag_type("double_tag");
     action->set_o_vid(0);
     cmd->set_add_outer_tag(false);
     cmd->set_remove_outer_tag(true);
     action->set_allocated_cmd(cmd);

     traffic_queue_1->set_direction(tech_profile::Direction::DOWNSTREAM);
     traffic_queue_2->set_direction(tech_profile::Direction::DOWNSTREAM);

     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));
     CreateTrafficQueues_(traffic_queues);

     Status status = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, flow_type, alloc_id, network_intf_id, gemport_id, *classifier, *action, priority_value, cookie);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }
 #endif

 ////////////////////////////////////////////////////////////////////////////
 // For testing OnuPacketOut functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestOnuPacketOut : public Test {
     protected:
         uint32_t pon_id = 0;
         uint32_t onu_id = 1;
         std::string pkt = "omci-pkt";
         NiceMock<BalMocker> balMock;

         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - OnuPacketOut success case
 TEST_F(TestOnuPacketOut, OnuPacketOutSuccess) {
     uint32_t port_no = 16;
     uint32_t gemport_id = 1024;

     bcmos_errno onu_oper_sub_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));

     Status status = OnuPacketOut_(pon_id, onu_id, port_no, gemport_id, pkt);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - OnuPacketOut Port number as 0 case
 TEST_F(TestOnuPacketOut, OnuPacketOutPortNo0) {
     uint32_t port_no = 0;
     uint32_t gemport_id = 1024;

     Status status = OnuPacketOut_(pon_id, onu_id, port_no, gemport_id, pkt);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 3 - OnuPacketOut success, Finding Flow ID from port no and Gem from Flow ID case
 TEST_F(TestOnuPacketOut, OnuPacketOutFindGemFromFlowSuccess) {
     uint32_t port_no = 16;
     uint32_t gemport_id = 0;

     bcmos_errno onu_oper_sub_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));

     Status status = OnuPacketOut_(pon_id, onu_id, port_no, gemport_id, pkt);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 4 - OnuPacketOut success, Failure in finding Gem port case
 TEST_F(TestOnuPacketOut, OnuPacketOutFindGemFromFlowFailure) {
     uint32_t port_no = 64;
     uint32_t gemport_id = 0;

     bcmos_errno onu_oper_sub_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(onu_oper_sub_res));

     Status status = OnuPacketOut_(pon_id, onu_id, port_no, gemport_id, pkt);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 #if 0
 ////////////////////////////////////////////////////////////////////////////
 // For testing FlowRemove functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestFlowRemove : public Test {
     protected:
         NiceMock<BalMocker> balMock;

         virtual void SetUp() {
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - FlowRemove - Failure case
 TEST_F(TestFlowRemove, FlowRemoveFailure) {
     bcmos_errno olt_cfg_clear_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     Status status = FlowRemove_(1, "upstream");
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 2 - FlowRemove - success case
 TEST_F(TestFlowRemove, FlowRemoveSuccess) {
     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     Status status = FlowRemove_(1, "upstream");
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing UplinkPacketOut functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestUplinkPacketOut : public Test {
     protected:
         uint32_t pon_id = 0;
         std::string pkt = "omci-pkt";
         NiceMock<BalMocker> balMock;

         bcmolt_flow_key flow_key;
         bcmolt_flow_cfg flow_cfg;

         virtual void SetUp() {
             flow_key.flow_id = 1;
             flow_key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM;
             BCMOLT_CFG_INIT(&flow_cfg, flow, flow_key);
             flow_cfg.data.onu_id=1;
             flow_cfg.key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM;
             flow_cfg.data.svc_port_id=1024;
             flow_cfg.data.priority=0;
             flow_cfg.data.cookie=0;
             flow_cfg.data.ingress_intf.intf_type=BCMOLT_FLOW_INTERFACE_TYPE_PON;
             flow_cfg.data.egress_intf.intf_type=BCMOLT_FLOW_INTERFACE_TYPE_NNI;
             flow_cfg.data.ingress_intf.intf_id=0;
             flow_cfg.data.egress_intf.intf_id=0;
             flow_cfg.data.classifier.o_vid=7;
             flow_cfg.data.classifier.o_pbits=0;
             flow_cfg.data.classifier.i_vid=0;
             flow_cfg.data.classifier.i_pbits=0;
             flow_cfg.data.classifier.ether_type=0;
             flow_cfg.data.classifier.ip_proto=0;
             flow_cfg.data.classifier.src_port=0;
             flow_cfg.data.classifier.dst_port=0;
             flow_cfg.data.classifier.pkt_tag_type=BCMOLT_PKT_TAG_TYPE_SINGLE_TAG;
             flow_cfg.data.egress_qos.type=BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE;
             flow_cfg.data.egress_qos.u.fixed_queue.queue_id=0;
             flow_cfg.data.egress_qos.tm_sched.id=1020;
             flow_cfg.data.action.cmds_bitmask=BCMOLT_ACTION_CMD_ID_ADD_OUTER_TAG;
             flow_cfg.data.action.o_vid=12;
             flow_cfg.data.action.o_pbits=0;
             flow_cfg.data.action.i_vid=0;
             flow_cfg.data.action.i_pbits=0;
             flow_cfg.data.state=BCMOLT_FLOW_STATE_ENABLE;
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - UplinkPacketOut success case
 TEST_F(TestUplinkPacketOut, UplinkPacketOutSuccess) {
     bcmos_errno send_eth_oper_sub_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(send_eth_oper_sub_res));
     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));

     Status status = UplinkPacketOut_(pon_id, pkt);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - UplinkPacketOut Failure case
 TEST_F(TestUplinkPacketOut, UplinkPacketOutFailure) {
     bcmos_errno send_eth_oper_sub_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_oper_submit(_, _)).WillByDefault(Return(send_eth_oper_sub_res));
     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));

     Status status = UplinkPacketOut_(pon_id, pkt);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 3 - UplinkPacketOut No matching flow id found for Uplink Packetout case
 TEST_F(TestUplinkPacketOut, UplinkPacketOutFailureNoFlowIdFound) {
     flow_cfg.key.flow_type = BCMOLT_FLOW_TYPE_DOWNSTREAM;

     FlowRemove_(2, "upstream");
     FlowRemove_(3, "upstream");
     FlowRemove_(4, "downstream");
     FlowRemove_(5, "upstream");
     FlowRemove_(6, "downstream");

     bcmos_errno flow_cfg_get_stub_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__flow_stub, bcmolt_cfg_get__flow_stub(_, _))
                      .WillRepeatedly(DoAll(SetArg1ToBcmOltFlowCfg(flow_cfg), Return(flow_cfg_get_stub_res)));

     Status status = UplinkPacketOut_(pon_id, pkt);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }
 #endif

 ////////////////////////////////////////////////////////////////////////////
 // For testing CreateTrafficSchedulers functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestCreateTrafficSchedulers : public Test {
     protected:
         NiceMock<BalMocker> balMock;
         tech_profile::TrafficSchedulers* traffic_scheds;
         tech_profile::TrafficScheduler* traffic_sched;
         tech_profile::SchedulerConfig* scheduler;
         tech_profile::TrafficShapingInfo* traffic_shaping_info;

         virtual void SetUp() {
             traffic_scheds = new tech_profile::TrafficSchedulers;
             traffic_scheds->set_intf_id(0);
             traffic_scheds->set_onu_id(1);
             traffic_scheds->set_uni_id(0);
             traffic_scheds->set_port_no(16);
             traffic_sched = traffic_scheds->add_traffic_scheds();
             traffic_sched->set_alloc_id(1024);
             scheduler = new tech_profile::SchedulerConfig;
             scheduler->set_priority(0);
             scheduler->set_weight(0);
             scheduler->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
             traffic_shaping_info = new tech_profile::TrafficShapingInfo;
             traffic_shaping_info->set_cbs(60536);
             traffic_shaping_info->set_pbs(65536);
             traffic_shaping_info->set_gir(10000);
         }

         virtual void TearDown() {
         }

     public:
         static void PushAllocCfgResult(AllocObjectState state, AllocCfgStatus status) {
             if(ALLOC_CFG_FLAG) {
                 alloc_cfg_compltd_key k(0, 1024);
                 alloc_cfg_complete_result res;
                 res.pon_intf_id = 0;
                 res.alloc_id = 1024;
                 res.state = state;
                 res.status = status;

                 bcmos_fastlock_lock(&alloc_cfg_wait_lock);
                 std::map<alloc_cfg_compltd_key,  Queue<alloc_cfg_complete_result> *>::iterator it = alloc_cfg_compltd_map.find(k);
                 if (it == alloc_cfg_compltd_map.end()) {
                     OPENOLT_LOG(ERROR, openolt_log_id, "alloc config key not found for alloc_id = %u, pon_intf = %u\n", 1024, 0);
                 } else {
                     it->second->push(res);
                     OPENOLT_LOG(INFO, openolt_log_id, "Pushed mocked alloc cfg result\n");
                 }
                 bcmos_fastlock_unlock(&alloc_cfg_wait_lock, 0);
             } else {
                 PushAllocCfgResult(state, status);
             }
         }
 };

 // Test 1 - CreateTrafficSchedulers-Upstream success case
 TEST_F(TestCreateTrafficSchedulers, CreateTrafficSchedulersUpstreamSuccess) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     future<Status> future_res = async(launch::async, CreateTrafficSchedulers_, traffic_scheds);
     async(launch::async, TestCreateTrafficSchedulers::PushAllocCfgResult, ALLOC_OBJECT_STATE_ACTIVE, ALLOC_CFG_STATUS_SUCCESS);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - CreateTrafficSchedulers-Upstream failure case(timeout waiting for alloc cfg indication)
 TEST_F(TestCreateTrafficSchedulers, UpstreamAllocCfgTimeout) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 3 - CreateTrafficSchedulers-Upstream failure case(error processing alloc cfg request)
 TEST_F(TestCreateTrafficSchedulers, UpstreamErrorProcessingAllocCfg) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     future<Status> future_res = async(launch::async, CreateTrafficSchedulers_, traffic_scheds);
     async(launch::async, TestCreateTrafficSchedulers::PushAllocCfgResult, ALLOC_OBJECT_STATE_ACTIVE, ALLOC_CFG_STATUS_FAIL);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 4 - CreateTrafficSchedulers-Upstream failure case(alloc object not in active state)
 TEST_F(TestCreateTrafficSchedulers, UpstreamAllocObjNotinActiveState) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     future<Status> future_res = async(launch::async, CreateTrafficSchedulers_, traffic_scheds);
     async(launch::async, TestCreateTrafficSchedulers::PushAllocCfgResult, ALLOC_OBJECT_STATE_INACTIVE, ALLOC_CFG_STATUS_SUCCESS);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 5 - CreateTrafficSchedulers-Upstream Failure case
 TEST_F(TestCreateTrafficSchedulers, CreateTrafficSchedulersUpstreamFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 6 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_BestEffort-Max BW set to 0) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_BestEffortMaxBWZeroFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(0);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 7 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_BestEffort-Max BW < Guaranteed BW) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_BestEffortMaxBWLtGuaranteedBwFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(32000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 8 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_BestEffort-Max BW = Guaranteed BW) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_BestEffortMaxBWEqGuaranteedBwFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(64000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 9 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_NA-Max BW set to 0) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_NAMaxBWZeroFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_NA);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(0);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 10 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_NA-Guaranteed BW set to 0) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_NAGuaranteedBwZeroFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_NA);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(0);
     traffic_shaping_info->set_pir(32000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 11 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_NA-Max BW < Guaranteed BW) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_NAMaxBWLtGuaranteedBwFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_NA);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(32000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 12 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_NA-Max BW = Guaranteed BW) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_NAMaxBWEqGuaranteedBwFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_NA);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(64000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 13 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_None-Max BW set to 0) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_NoneMaxBWZeroFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_None);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(0);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 14 - CreateTrafficSchedulers-Upstream Failure (AdditionalBW_None-Guaranteed BW set to 0) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_NoneGuaranteedBwZeroFailure) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_None);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(0);
     traffic_shaping_info->set_pir(32000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 15 - CreateTrafficSchedulers-Upstream Success (AdditionalBW_None-Max BW > Guaranteed BW) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_NoneMaxBWGtGuaranteedBwSuccess) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_None);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     future<Status> future_res = async(launch::async, CreateTrafficSchedulers_, traffic_scheds);
     async(launch::async, TestCreateTrafficSchedulers::PushAllocCfgResult, ALLOC_OBJECT_STATE_ACTIVE, ALLOC_CFG_STATUS_SUCCESS);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 16 - CreateTrafficSchedulers-Upstream Success (AdditionalBW_None-Max BW < Guaranteed BW) case
 TEST_F(TestCreateTrafficSchedulers, AdditionalBW_NoneMaxBWLtGuaranteedBwSuccess) {
     scheduler->set_direction(tech_profile::Direction::UPSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_None);
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(32000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     future<Status> future_res = async(launch::async, CreateTrafficSchedulers_, traffic_scheds);
     async(launch::async, TestCreateTrafficSchedulers::PushAllocCfgResult, ALLOC_OBJECT_STATE_ACTIVE, ALLOC_CFG_STATUS_SUCCESS);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 17 - CreateTrafficSchedulers-Downstream success case
 TEST_F(TestCreateTrafficSchedulers, CreateTrafficSchedulersDownstreamSuccess) {
     scheduler->set_direction(tech_profile::Direction::DOWNSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::DOWNSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 18 - CreateTrafficSchedulers-Downstream Failure case
 TEST_F(TestCreateTrafficSchedulers, CreateTrafficSchedulersDownstreamFailure) {
     scheduler->set_direction(tech_profile::Direction::DOWNSTREAM);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::DOWNSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     bcmos_errno olt_cfg_set_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 19 - CreateTrafficSchedulers-Invalid direction Failure case
 TEST_F(TestCreateTrafficSchedulers, CreateTrafficSchedulersInvalidDirectionFailure) {
     scheduler->set_direction(tech_profile::Direction::BIDIRECTIONAL);
     scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
     traffic_sched->set_direction(tech_profile::Direction::BIDIRECTIONAL);
     traffic_sched->set_allocated_scheduler(scheduler);
     traffic_shaping_info->set_cir(64000);
     traffic_shaping_info->set_pir(128000);
     traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);

     Status status = CreateTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing RemoveTrafficSchedulers functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestRemoveTrafficSchedulers : public Test {
     protected:
         NiceMock<BalMocker> balMock;
         tech_profile::TrafficSchedulers* traffic_scheds;
         tech_profile::TrafficScheduler* traffic_sched;
         tech_profile::SchedulerConfig* scheduler;
         tech_profile::TrafficShapingInfo* traffic_shaping_info;
         alloc_cfg_complete_result res;
         uint32_t pon_id = 0;

         virtual void SetUp() {
             traffic_scheds = new tech_profile::TrafficSchedulers;
             traffic_scheds->set_intf_id(0);
             traffic_scheds->set_onu_id(1);
             traffic_scheds->set_uni_id(0);
             traffic_scheds->set_port_no(16);
             traffic_sched = traffic_scheds->add_traffic_scheds();
             traffic_sched->set_alloc_id(1025);
             scheduler = new tech_profile::SchedulerConfig;
             scheduler->set_priority(0);
             scheduler->set_weight(0);
             scheduler->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
             scheduler->set_additional_bw(tech_profile::AdditionalBW::AdditionalBW_BestEffort);
             traffic_shaping_info = new tech_profile::TrafficShapingInfo;
             traffic_shaping_info->set_cir(64000);
             traffic_shaping_info->set_pir(128000);
             traffic_shaping_info->set_cbs(60536);
             traffic_shaping_info->set_pbs(65536);
             traffic_shaping_info->set_gir(10000);
             traffic_sched->set_allocated_traffic_shaping_info(traffic_shaping_info);
             bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
             ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));
         }

         virtual void TearDown() {
         }

     public:
         static void PushAllocCfgResult(AllocObjectState state, AllocCfgStatus status) {
             if(ALLOC_CFG_FLAG) {
                 alloc_cfg_compltd_key k(0, 1025);
                 alloc_cfg_complete_result res;
                 res.pon_intf_id = 0;
                 res.alloc_id = 1025;
                 res.state = state;
                 res.status = status;

                 bcmos_fastlock_lock(&alloc_cfg_wait_lock);
                 std::map<alloc_cfg_compltd_key,  Queue<alloc_cfg_complete_result> *>::iterator it = alloc_cfg_compltd_map.find(k);
                 if (it == alloc_cfg_compltd_map.end()) {
                     OPENOLT_LOG(ERROR, openolt_log_id, "alloc config key not found for alloc_id = %u, pon_intf = %u\n", 1025, 0);
                 } else {
                     it->second->push(res);
                     OPENOLT_LOG(INFO, openolt_log_id, "Pushed mocked alloc cfg result\n");
                 }
                 bcmos_fastlock_unlock(&alloc_cfg_wait_lock, 0);
             } else {
                 PushAllocCfgResult(state, status);
             }
         }
 };

 // Test 1 - RemoveTrafficSchedulers-Upstream success case
 TEST_F(TestRemoveTrafficSchedulers, RemoveTrafficSchedulersUpstreamSuccess) {
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_ACTIVE_WORKING;
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     future<Status> future_res = async(launch::async, RemoveTrafficSchedulers_, traffic_scheds);
     async(launch::async, TestRemoveTrafficSchedulers::PushAllocCfgResult, ALLOC_OBJECT_STATE_NOT_CONFIGURED, ALLOC_CFG_STATUS_SUCCESS);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - RemoveTrafficSchedulers-Upstream success case(alloc object is not reset)
 TEST_F(TestRemoveTrafficSchedulers, UpstreamAllocObjNotReset) {
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_ACTIVE_WORKING;
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     future<Status> future_res = async(launch::async, RemoveTrafficSchedulers_, traffic_scheds);
     async(launch::async, TestRemoveTrafficSchedulers::PushAllocCfgResult, ALLOC_OBJECT_STATE_INACTIVE, ALLOC_CFG_STATUS_SUCCESS);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 3 - RemoveTrafficSchedulers-Upstream success case(PON disable case - Don't wait for alloc object delete response)
 TEST_F(TestRemoveTrafficSchedulers, UpstreamAllocObjPonDisable) {
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_OK;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     future<Status> future_res = async(launch::async, RemoveTrafficSchedulers_, traffic_scheds);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 4 - RemoveTrafficSchedulers-Upstream success case(Get PON State failure case)
 TEST_F(TestRemoveTrafficSchedulers, UpstreamAllocObjGetPonStateFailure) {
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);
     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     bcmolt_pon_interface_key pon_key;
     bcmolt_pon_interface_cfg pon_cfg;
     pon_key.pon_ni = pon_id;
     BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key);
     pon_cfg.data.state = BCMOLT_INTERFACE_STATE_INACTIVE;
     bcmos_errno olt_cfg_get_pon_stub_res = BCM_ERR_INTERNAL;
     EXPECT_GLOBAL_CALL(bcmolt_cfg_get__pon_intf_stub, bcmolt_cfg_get__pon_intf_stub(_, _))
                      .WillOnce(DoAll(SetArg1ToBcmOltPonCfg(pon_cfg), Return(olt_cfg_get_pon_stub_res)));

     future<Status> future_res = async(launch::async, RemoveTrafficSchedulers_, traffic_scheds);

     Status status = future_res.get();
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 5 - RemoveTrafficSchedulers-Upstream Failure case
 TEST_F(TestRemoveTrafficSchedulers, RemoveTrafficSchedulersUpstreamFailure) {
     traffic_sched->set_direction(tech_profile::Direction::UPSTREAM);

     bcmos_errno olt_cfg_clear_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     Status status = RemoveTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 6 - RemoveTrafficSchedulers-Downstream Failure case
 TEST_F(TestRemoveTrafficSchedulers, RemoveTrafficSchedulersDownstreamFailure) {
     //Create Scheduler
     scheduler->set_direction(tech_profile::Direction::DOWNSTREAM);
     traffic_sched->set_direction(tech_profile::Direction::DOWNSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     CreateTrafficSchedulers_(traffic_scheds);

     bcmos_errno olt_cfg_clear_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     Status status = RemoveTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 7 - RemoveTrafficSchedulers-Downstream success case
 TEST_F(TestRemoveTrafficSchedulers, RemoveTrafficSchedulersDownstreamSuccess) {
     //Create Scheduler
     scheduler->set_direction(tech_profile::Direction::DOWNSTREAM);
     traffic_sched->set_direction(tech_profile::Direction::DOWNSTREAM);
     traffic_sched->set_allocated_scheduler(scheduler);
     CreateTrafficSchedulers_(traffic_scheds);

     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     Status status = RemoveTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 8 - RemoveTrafficSchedulers-Downstream Scheduler not present case
 TEST_F(TestRemoveTrafficSchedulers, RemoveTrafficSchedulersDownstreamSchedNotpresent) {
     traffic_sched->set_direction(tech_profile::Direction::DOWNSTREAM);

     Status status = RemoveTrafficSchedulers_(traffic_scheds);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing CreateTrafficQueues functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestCreateTrafficQueues : public Test {
     protected:
         NiceMock<BalMocker> balMock;
         tech_profile::TrafficQueues* traffic_queues;
         tech_profile::TrafficQueue* traffic_queue_1;
         tech_profile::TrafficQueue* traffic_queue_2;
         tech_profile::DiscardConfig* discard_config_1;
         tech_profile::DiscardConfig* discard_config_2;
         tech_profile::TailDropDiscardConfig* tail_drop_discard_config_1;
         tech_profile::TailDropDiscardConfig* tail_drop_discard_config_2;

         virtual void SetUp() {
             traffic_queues = new tech_profile::TrafficQueues;
             traffic_queues->set_intf_id(0);
             traffic_queues->set_onu_id(1);
             traffic_queue_1 = traffic_queues->add_traffic_queues();
             traffic_queue_1->set_gemport_id(1024);
             traffic_queue_1->set_pbit_map("0b00000101");
             traffic_queue_1->set_aes_encryption(true);
             traffic_queue_1->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
             traffic_queue_1->set_priority(0);
             traffic_queue_1->set_weight(0);
             traffic_queue_1->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
             discard_config_1 = new tech_profile::DiscardConfig;
             discard_config_1->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
             tail_drop_discard_config_1 = new tech_profile::TailDropDiscardConfig;
             tail_drop_discard_config_1->set_queue_size(8);
             discard_config_1->set_allocated_tail_drop_discard_config(tail_drop_discard_config_1);
             traffic_queue_1->set_allocated_discard_config(discard_config_1);
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - CreateTrafficQueues-Upstream/Downstream FIXED_QUEUE success case
 TEST_F(TestCreateTrafficQueues, CreateUpstreamDownstreamFixedQueueSuccess) {
     Status status;
     traffic_queues->set_uni_id(0);
     traffic_queues->set_port_no(16);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     status = CreateTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );

     traffic_queue_1->set_direction(tech_profile::Direction::DOWNSTREAM);
     status = CreateTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - CreateTrafficQueues-Upstream PRIORITY_TO_QUEUE success case
 TEST_F(TestCreateTrafficQueues, CreateUpstreamPriorityQueueSuccess) {
     traffic_queues->set_uni_id(1);
     traffic_queues->set_port_no(32);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);

     traffic_queue_2 = traffic_queues->add_traffic_queues();
     traffic_queue_2->set_gemport_id(1025);
     traffic_queue_2->set_pbit_map("0b00001010");
     traffic_queue_2->set_aes_encryption(true);
     traffic_queue_2->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
     traffic_queue_2->set_priority(1);
     traffic_queue_2->set_weight(0);
     traffic_queue_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
     discard_config_2 = new tech_profile::DiscardConfig;
     discard_config_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
     tail_drop_discard_config_2 = new tech_profile::TailDropDiscardConfig;
     tail_drop_discard_config_2->set_queue_size(8);
     discard_config_2->set_allocated_tail_drop_discard_config(tail_drop_discard_config_2);
     traffic_queue_2->set_allocated_discard_config(discard_config_2);
     traffic_queue_2->set_direction(tech_profile::Direction::UPSTREAM);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = CreateTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 3 - CreateTrafficQueues-Upstream create tm queue mapping profile failure case
 TEST_F(TestCreateTrafficQueues, CreateUpstreamPriorityQueueTMQMPCreationFailure) {
     traffic_queues->set_uni_id(2);
     traffic_queues->set_port_no(16);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);

     traffic_queue_2 = traffic_queues->add_traffic_queues();
     traffic_queue_2->set_gemport_id(1025);
     traffic_queue_2->set_pbit_map("0b10001010");
     traffic_queue_2->set_aes_encryption(true);
     traffic_queue_2->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
     traffic_queue_2->set_priority(1);
     traffic_queue_2->set_weight(0);
     traffic_queue_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
     discard_config_2 = new tech_profile::DiscardConfig;
     discard_config_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
     tail_drop_discard_config_2 = new tech_profile::TailDropDiscardConfig;
     tail_drop_discard_config_2->set_queue_size(8);
     discard_config_2->set_allocated_tail_drop_discard_config(tail_drop_discard_config_2);
     traffic_queue_2->set_allocated_discard_config(discard_config_2);
     traffic_queue_2->set_direction(tech_profile::Direction::UPSTREAM);

     bcmos_errno olt_cfg_set_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = CreateTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 4 - CreateTrafficQueues-Upstream PRIORITY_TO_QUEUE TM QMP already present case
 TEST_F(TestCreateTrafficQueues, CreateUpstreamPriorityQueueTMQMPAlreadyPresent) {
     traffic_queues->set_uni_id(3);
     traffic_queues->set_port_no(16);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);

     traffic_queue_2 = traffic_queues->add_traffic_queues();
     traffic_queue_2->set_gemport_id(1025);
     traffic_queue_2->set_pbit_map("0b00001010");
     traffic_queue_2->set_aes_encryption(true);
     traffic_queue_2->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
     traffic_queue_2->set_priority(1);
     traffic_queue_2->set_weight(0);
     traffic_queue_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
     discard_config_2 = new tech_profile::DiscardConfig;
     discard_config_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
     tail_drop_discard_config_2 = new tech_profile::TailDropDiscardConfig;
     tail_drop_discard_config_2->set_queue_size(8);
     discard_config_2->set_allocated_tail_drop_discard_config(tail_drop_discard_config_2);
     traffic_queue_2->set_allocated_discard_config(discard_config_2);
     traffic_queue_2->set_direction(tech_profile::Direction::UPSTREAM);

     bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = CreateTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 5 - CreateTrafficQueues-Upstream PRIORITY_TO_QUEUE TM QMP Max count reached case
 TEST_F(TestCreateTrafficQueues, CreateUpstreamPriorityQueueReachedMaxTMQMPCount) {
     int uni_ids[17] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17};
     int port_nos[17] = {16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208, 224, 240, 256, 272};
     std::string pbit_maps[17] = {"0b00001010", "0b10001010", "0b00000001", "0b00000010", "0b00000100", "0b00001000", "0b00010000", "0b00100000", "0b01000000", "0b10000000", "0b10000001", "0b10000010", "0b10000100", "0b10001000", "0b10010000", "0b10100000", "0b11000000"};

     traffic_queue_2 = traffic_queues->add_traffic_queues();
     for(int i=0; i<sizeof(uni_ids)/sizeof(uni_ids[0]); i++) {
         traffic_queues->set_uni_id(uni_ids[i]);
         traffic_queues->set_port_no(port_nos[i]);
         traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);

         traffic_queue_2->set_gemport_id(1025);
         traffic_queue_2->set_pbit_map(pbit_maps[i]);
         traffic_queue_2->set_aes_encryption(true);
         traffic_queue_2->set_sched_policy(tech_profile::SchedulingPolicy::StrictPriority);
         traffic_queue_2->set_priority(1);
         traffic_queue_2->set_weight(0);
         traffic_queue_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
         discard_config_2 = new tech_profile::DiscardConfig;
         discard_config_2->set_discard_policy(tech_profile::DiscardPolicy::TailDrop);
         tail_drop_discard_config_2 = new tech_profile::TailDropDiscardConfig;
         tail_drop_discard_config_2->set_queue_size(8);
         discard_config_2->set_allocated_tail_drop_discard_config(tail_drop_discard_config_2);
         traffic_queue_2->set_allocated_discard_config(discard_config_2);
         traffic_queue_2->set_direction(tech_profile::Direction::UPSTREAM);

         bcmos_errno olt_cfg_set_res = BCM_ERR_OK;
         ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

         Status status = CreateTrafficQueues_(traffic_queues);
         if(i==16)
             ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
         else
             ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
     }
 }

 // Test 6 - CreateTrafficQueues-Upstream FIXED_QUEUE failure case
 TEST_F(TestCreateTrafficQueues, CreateUpstreamFixedQueueFailure) {
     traffic_queues->set_uni_id(0);
     traffic_queues->set_port_no(16);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);

     bcmos_errno olt_cfg_set_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_set(_, _)).WillByDefault(Return(olt_cfg_set_res));

     Status status = CreateTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 ////////////////////////////////////////////////////////////////////////////
 // For testing RemoveTrafficQueues functionality
 ////////////////////////////////////////////////////////////////////////////

 class TestRemoveTrafficQueues : public Test {
     protected:
         NiceMock<BalMocker> balMock;
         tech_profile::TrafficQueues* traffic_queues;
         tech_profile::TrafficQueue* traffic_queue_1;
         tech_profile::TrafficQueue* traffic_queue_2;

         virtual void SetUp() {
             traffic_queues = new tech_profile::TrafficQueues;
             traffic_queues->set_intf_id(0);
             traffic_queues->set_onu_id(1);
             traffic_queue_1 = traffic_queues->add_traffic_queues();
             traffic_queue_1->set_gemport_id(1024);
             traffic_queue_1->set_priority(0);
         }

         virtual void TearDown() {
         }
 };

 // Test 1 - RemoveTrafficQueues-Upstream/Downstream FIXED_QUEUE success case
 TEST_F(TestRemoveTrafficQueues, RemoveUpstreamDownstreamFixedQueueSuccess) {
     Status status;
     traffic_queues->set_uni_id(0);
     traffic_queues->set_port_no(16);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);

     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     status = RemoveTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );

     traffic_queue_1->set_direction(tech_profile::Direction::DOWNSTREAM);
     status = RemoveTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 // Test 2 - RemoveTrafficQueues-Downstream FIXED_QUEUE failure case
 TEST_F(TestRemoveTrafficQueues, RemoveUpstreamDownstreamFixedQueueFailure) {
     Status status;
     traffic_queues->set_uni_id(0);
     traffic_queues->set_port_no(16);
     traffic_queue_1->set_direction(tech_profile::Direction::DOWNSTREAM);

     bcmos_errno olt_cfg_clear_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     status = RemoveTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }

 // Test 3 - RemoveTrafficQueues-Downstream_QUEUE not present case
 TEST_F(TestRemoveTrafficQueues, RemoveDownstreamFixedQueueNotPresent) {
     //Remove scheduler so that is_tm_sched_id_present api call will return false
     tech_profile::TrafficSchedulers* traffic_scheds;
     tech_profile::TrafficScheduler* traffic_sched;
     traffic_scheds = new tech_profile::TrafficSchedulers;
     traffic_scheds->set_intf_id(0);
     traffic_scheds->set_onu_id(1);
     traffic_scheds->set_uni_id(0);
     traffic_scheds->set_port_no(16);
     traffic_sched = traffic_scheds->add_traffic_scheds();
     traffic_sched->set_alloc_id(1024);
     traffic_sched->set_direction(tech_profile::Direction::DOWNSTREAM);

     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));
     RemoveTrafficSchedulers_(traffic_scheds);

     traffic_queues->set_uni_id(0);
     traffic_queues->set_port_no(16);
     traffic_queue_1->set_direction(tech_profile::Direction::DOWNSTREAM);

     Status status = RemoveTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 /* Test 4 - RemoveTrafficQueues-Upstream PRIORITY_TO_QUEUE, not removing TM QMP
 as it is getting referred by some other queues case */
 TEST_F(TestRemoveTrafficQueues, RemoveUpstreamPriorityQueueNotRemovingTMQMP) {
     traffic_queues->set_uni_id(3);
     traffic_queues->set_port_no(16);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_queue_2 = traffic_queues->add_traffic_queues();
     traffic_queue_2->set_gemport_id(1025);
     traffic_queue_2->set_priority(1);
     traffic_queue_2->set_direction(tech_profile::Direction::UPSTREAM);

     Status status = RemoveTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 /* Test 5 - RemoveTrafficQueues-Upstream PRIORITY_TO_QUEUE, removing TM QMP as it
 is not getting referred by any other queues case */
 TEST_F(TestRemoveTrafficQueues, RemoveUpstreamPriorityQueueRemovingTMQMP) {
     traffic_queues->set_uni_id(1);
     traffic_queues->set_port_no(32);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_queue_2 = traffic_queues->add_traffic_queues();
     traffic_queue_2->set_gemport_id(1025);
     traffic_queue_2->set_priority(1);

     bcmos_errno olt_cfg_clear_res = BCM_ERR_OK;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     Status status = RemoveTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() == Status::OK.error_message() );
 }

 /* Test 6 - RemoveTrafficQueues-Upstream PRIORITY_TO_QUEUE, error while removing TM QMP
 having no reference to any other queues case */
 TEST_F(TestRemoveTrafficQueues, RemoveUpstreamPriorityQueueErrorRemovingTMQMP) {
     traffic_queues->set_uni_id(4);
     traffic_queues->set_port_no(64);
     traffic_queue_1->set_direction(tech_profile::Direction::UPSTREAM);
     traffic_queue_2 = traffic_queues->add_traffic_queues();
     traffic_queue_2->set_gemport_id(1025);
     traffic_queue_2->set_priority(1);

     bcmos_errno olt_cfg_clear_res = BCM_ERR_INTERNAL;
     ON_CALL(balMock, bcmolt_cfg_clear(_, _)).WillByDefault(Return(olt_cfg_clear_res));

     Status status = RemoveTrafficQueues_(traffic_queues);
     ASSERT_TRUE( status.error_message() != Status::OK.error_message() );
 }