| # Copyright (C) 2018 Open Networking Foundation |
| # |
| # This program is free software: you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation, either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| ######################################################################## |
| ## |
| ## |
| ## Config |
| ## |
| ## |
| DEVICE = asfvolt16 |
| # |
| # Three vendor proprietary source files are required to build BAL. |
| # SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK. |
| # sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK. |
| # ACCTON_BAL_<BAL_VER>-<ACCTON_VER>.patch - Accton/Edgecore's patch. |
| BAL_MAJOR_VER = 02.06 |
| BAL_VER = 2.6.0.1 |
| SDK_VER = 6.5.7 |
| ACCTON_VER = 201804301043 |
| # |
| # Version of Open Network Linux (ONL). |
| ONL_KERN_VER_MAJOR = 3.7 |
| ONL_KERN_VER_MINOR = 10 |
| # |
| # Build directory |
| BUILD_DIR = build |
| # |
| # GRPC installation |
| GRPC_ADDR = https://github.com/grpc/grpc |
| GRPC_DST = /tmp/grpc |
| GRPC_VER = v1.10.x |
| |
| USER := $(shell echo $(USER)) |
| # |
| ######################################################################## |
| ## |
| ## |
| ## Install prerequisites |
| ## |
| ## |
| HOST_SYSTEM = $(shell uname | cut -f 1 -d_) |
| SYSTEM ?= $(HOST_SYSTEM) |
| |
| CXX = g++ |
| CPPFLAGS += `pkg-config --cflags protobuf grpc` |
| CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix |
| LDFLAGS += -L/usr/local/lib `pkg-config --libs grpc++ grpc` -ldl |
| |
| prereq: |
| sudo apt-get -q -y install git pkg-config build-essential autoconf libtool libgflags-dev libgtest-dev clang libc++-dev unzip docker.io |
| sudo apt-get install -y build-essential autoconf libssl-dev gawk debhelper dh-systemd init-system-helpers |
| |
| # Install GRPC, libprotobuf and protoc |
| rm -rf $(GRPC_DST) |
| git clone -b $(GRPC_VER) $(GRPC_ADDR) $(GRPC_DST) |
| cd $(GRPC_DST) && git submodule update --init |
| cd $(GRPC_DST)/third_party/protobuf && ./autogen.sh && ./configure |
| make -C $(GRPC_DST)/third_party/protobuf |
| sudo make -C $(GRPC_DST)/third_party/protobuf install |
| sudo ldconfig |
| make -C $(GRPC_DST) |
| sudo make -C $(GRPC_DST) install |
| sudo ldconfig |
| |
| docker: |
| echo $(USER) |
| sudo groupadd -f docker |
| ifneq "$(USER)" "" |
| sudo usermod -aG docker $(USER) |
| endif |
| |
| ######################################################################## |
| ## |
| ## |
| ## ONL |
| ## |
| ## |
| ONL_KERN_VER = $(ONL_KERN_VER_MAJOR).$(ONL_KERN_VER_MINOR) |
| ONL_REPO = $(DEVICE)-onl |
| ONL_DIR = $(BUILD_DIR)/$(ONL_REPO) |
| onl: |
| if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \ |
| mkdir -p $(ONL_DIR); \ |
| git clone https://gerrit.opencord.org/$(ONL_REPO) $(ONL_DIR); \ |
| make -C $(ONL_DIR) $(DEVICE)-$(ONL_KERN_VER_MAJOR); \ |
| fi; |
| onl-force: |
| make -C $(ONL_DIR) $(DEVICE)-$(ONL_KERN_VER_MAJOR) |
| distclean-onl: |
| sudo rm -rf $(ONL_DIR) |
| |
| ######################################################################## |
| ## |
| ## |
| ## BAL |
| ## |
| ## |
| BAL_ZIP = SW-BCM68620_$(subst .,_,$(BAL_VER)).zip |
| SDK_ZIP = sdk-all-$(SDK_VER).tar.gz |
| ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(ACCTON_VER).patch |
| OPENOLT_BAL_PATCH = OPENOLT_BAL_$(BAL_VER).patch |
| BAL_DIR = $(BUILD_DIR)/$(DEVICE)-bal |
| ONL_KERNDIR = $(PWD)/$(ONL_DIR)/OpenNetworkLinux/packages/base/amd64/kernels/kernel-$(ONL_KERN_VER_MAJOR)-x86-64-all/builds |
| MAPLE_KERNDIR = $(BAL_DIR)/bcm68620_release/$(DEVICE)/kernels |
| BCM_SDK = $(BAL_DIR)/bal_release/3rdparty/bcm-sdk |
| BALLIBDIR = $(BAL_DIR)/bal_release/build/core/src/apps/bal_api_dist_shared_lib |
| BALLIBNAME = bal_api_dist |
| BAL_INC = -I$(BAL_DIR)/bal_release/src/common/os_abstraction \ |
| -I$(BAL_DIR)/bal_release/src/common/os_abstraction/posix \ |
| -I$(BAL_DIR)/bal_release/src/common/config \ |
| -I$(BAL_DIR)/bal_release/src/core/platform \ |
| -I$(BAL_DIR)/bal_release/src/core/main \ |
| -I$(BAL_DIR)/bal_release/src/common/include \ |
| -I$(BAL_DIR)/bal_release/src/lib/libbalapi \ |
| -I$(BAL_DIR)/bal_release/src/balapiend \ |
| -I$(BAL_DIR)/bal_release/src/common/dev_log \ |
| -I$(BAL_DIR)/bal_release/src/common/bal_dist_utils \ |
| -I$(BAL_DIR)/bal_release/src/lib/libtopology \ |
| -I$(BAL_DIR)/bal_release/src/lib/libcmdline \ |
| -I$(BAL_DIR)/bal_release/src/lib/libutils \ |
| -I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/utils \ |
| -I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/model \ |
| -I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/api \ |
| -I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_reference/cli |
| CXXFLAGS += $(BAL_INC) -I $(BAL_DIR)/lib/cmdline |
| CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST |
| |
| sdk: onl |
| ifeq ("$(wildcard $(BAL_DIR))","") |
| mkdir $(BAL_DIR) |
| unzip download/$(BAL_ZIP) -d $(BAL_DIR) |
| cp download/$(SDK_ZIP) $(BCM_SDK) |
| chmod -R 744 $(BAL_DIR) |
| cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR) |
| mkdir -p $(MAPLE_KERNDIR) |
| ln -s $(ONL_KERNDIR)/linux-$(ONL_KERN_VER) $(MAPLE_KERNDIR)/linux-$(ONL_KERN_VER) |
| ln -s $(ONL_DIR)/OpenNetworkLinux/packages/base/any/kernels/archives/linux-$(ONL_KERN_VER).tar.xz $(MAPLE_KERNDIR)/linux-$(ONL_KERN_VER).tar.xz |
| ln -s $(ONL_DIR)/OpenNetworkLinux/packages/base/any/kernels/$(ONL_KERN_VER_MAJOR)/configs/x86_64-all/x86_64-all.config $(MAPLE_KERNDIR)/x86_64-all.config |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) maple_sdk_dir |
| cat download/$(OPENOLT_BAL_PATCH) | patch -p1 -d $(BAL_DIR) |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) maple_sdk |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) switch_sdk_dir |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) switch_sdk |
| KERNDIR=$(ONL_KERNDIR)/linux-$(ONL_KERN_VER) BOARD=$(DEVICE) ARCH=x86_64 SDKBUILD=build_bcm_user make -C $(BCM_SDK)/build-$(DEVICE)/sdk-all-$(SDK_VER)/systems/linux/user/x86-generic_64-2_6 |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) bal |
| echo 'auto_create_interface_tm=y' >> $(BAL_DIR)/bal_release/3rdparty/maple/cur/$(DEVICE)/board_files/broadcom/bal_config.ini |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) release_board |
| endif |
| |
| bal: sdk |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) bal |
| echo 'auto_create_interface_tm=y' >> $(BAL_DIR)/bal_release/3rdparty/maple/cur/asfvolt16/board_files/broadcom/bal_config.ini |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) release_board |
| |
| bal-clean: |
| make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) clean_bal |
| |
| ######################################################################## |
| ## |
| ## |
| ## OpenOLT API |
| ## |
| ## |
| OPENOLT_PROTOS_DIR = ./protos |
| OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a |
| CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens |
| protos: |
| make -C $(OPENOLT_PROTOS_DIR) all |
| protos-clean: |
| -make -C $(OPENOLT_PROTOS_DIR) clean |
| |
| ######################################################################## |
| ## |
| ## |
| ## common |
| ## |
| ## |
| common/%.o: common/%.cc |
| $(CXX) $(CXXFLAGS) -I./common -c $< -o $@ |
| |
| ######################################################################## |
| ## |
| ## |
| ## sim |
| ## |
| ## |
| SIM_SRCS = $(wildcard sim/*.cc) $(wildcard common/*.cc) |
| SIM_OBJS = $(SIM_SRCS:.cc=.o) |
| SIM_DEPS = $(SIM_SRCS:.cc=.d) |
| sim: sim/openoltsim |
| sim/openoltsim: protos $(SIM_OBJS) |
| $(CXX) -pthread -L/usr/local/lib $(SIM_OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -lgrpc++ -lgrpc -lpthread -ldl |
| sim/%.o: sim/%.cc |
| $(CXX) -std=c++11 -fpermissive -Wno-literal-suffix -I./common -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens -c $< -o $@ |
| clean-sim: |
| rm -f sim/openoltsim $(SIM_OBJS) $(SIM_DEPS) |
| |
| ######################################################################## |
| ## |
| ## |
| ## openolt |
| ## |
| ## |
| SRCS = $(wildcard src/*.cc) $(wildcard common/*.cc) |
| OBJS = $(SRCS:.cc=.o) |
| DEPS = $(SRCS:.cc=.d) |
| .DEFAULT_GOAL := all |
| all: $(BUILD_DIR)/openolt |
| $(BUILD_DIR)/openolt: sdk protos $(OBJS) |
| $(CXX) -pthread -L/usr/local/lib -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -l$(BALLIBNAME) -lgrpc++ -lgrpc -lpthread -ldl |
| ln -sf $(PWD)/$(BAL_DIR)/bcm68620_release/$(DEVICE)/release/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz $(BUILD_DIR)/. |
| ln -sf $(PWD)/$(BAL_DIR)/bcm68620_release/$(DEVICE)/release/broadcom/libbal_api_dist.so $(BUILD_DIR)/. |
| ln -sf $(PWD)/$(BAL_DIR)/bal_release/build/core/src/apps/bal_core_dist/bal_core_dist $(BUILD_DIR)/. |
| ln -sf $(shell ldconfig -p | grep libgrpc.so.6 | tr ' ' '\n' | grep /) $(BUILD_DIR)/libgrpc.so.6 |
| ln -sf $(shell ldconfig -p | grep libgrpc++.so.1 | tr ' ' '\n' | grep /) $(BUILD_DIR)/libgrpc++.so.1 |
| src/%.o: src/%.cc |
| $(CXX) $(CXXFLAGS) -I./common -c $< -o $@ |
| |
| deb: |
| cp $(BUILD_DIR)/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz mkdebian/debian |
| cp $(BUILD_DIR)/openolt mkdebian/debian |
| cp $(BUILD_DIR)/libgrpc.so.6 mkdebian/debian |
| cp $(BUILD_DIR)/libgrpc++.so.1 mkdebian/debian |
| cd mkdebian && ./build_$(DEVICE)_deb.sh |
| mv *.deb $(BUILD_DIR)/openolt.deb |
| make deb-cleanup |
| |
| src/%.o: %.cpp |
| $(CXX) -MMD -c $< -o $@ |
| |
| deb-cleanup: |
| rm -f mkdebian/debian/$(DEVICE).debhelper.log |
| rm -f mkdebian/debian/$(DEVICE).postinst.debhelper |
| rm -f mkdebian/debian/$(DEVICE).postrm.debhelper |
| rm -f mkdebian/debian/$(DEVICE).substvars |
| rm -rf mkdebian/debian/$(DEVICE)/ |
| rm -f mkdebian/debian/libgrpc++.so.1 |
| rm -f mkdebian/debian/libgrpc.so.6 |
| rm -f mkdebian/debian/openolt |
| rm -f mkdebian/debian/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz |
| rm -rf mkdebian/debian/tmp/ |
| rm -f $(DEVICE)_$(BAL_VER)+edgecore-V$(ACCTON_VER)_amd64.changes |
| |
| clean: protos-clean deb-cleanup |
| rm -f $(OBJS) $(DEPS) |
| rm -rf protos/googleapis |
| rm -f $(BUILD_DIR)/libgrpc.so.6 $(BUILD_DIR)/libgrpc++.so.1 |
| rm -f $(BUILD_DIR)/libbal_api_dist.so |
| rm -f $(BUILD_DIR)/openolt |
| rm -f $(BUILD_DIR)/bal_core_dist |
| rm -f $(BUILD_DIR)/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz |
| rm -f $(BUILD_DIR)/openolt.deb |
| |
| distclean: |
| rm -rf $(BUILD_DIR) |
| |
| .PHONY: onl sdk bal protos prereq sim |