| #Copyright 2018-present Open Networking Foundation |
| # |
| #Licensed under the Apache License, Version 2.0 (the "License"); |
| #you may not use this file except in compliance with the License. |
| #You may obtain a copy of the License at |
| # |
| #http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| #Unless required by applicable law or agreed to in writing, software |
| #distributed under the License is distributed on an "AS IS" BASIS, |
| #WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| #See the License for the specific language governing permissions and |
| #limitations under the License. |
| |
| ######################################################################## |
| ## |
| ## |
| ## Config |
| ## |
| ## |
| TOP_DIR=`pwd` |
| OPENOLTDEVICE ?= generic |
| |
| # |
| # Three vendor proprietary source files are required to build BAL. |
| # SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK. |
| # sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK. |
| # ACCTON_BAL_<BAL_VER>-<DEV_VER>.patch - Accton/Edgecore's patch. |
| BAL_MAJOR_VER = 3 |
| BAL_MINOR_VER = 4 |
| BAL_REV_A_VER = 9 |
| BAL_REV_B_VER = 6 |
| BAL_API_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_REV_B_VER) |
| BAL_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_REV_B_VER) |
| SDK_VER = 6.5.13 |
| DEV_VER ?= 202008310101 |
| # |
| # Version of Open Network Linux (ONL). |
| ONL_KERN_VER_MAJOR = 4.14 |
| |
| # OpenOLT Proto version. |
| # This specifies the GIT tag in https://github.com/opencord/voltha-protos |
| # repo that we need to refer to, to pick the right version of |
| # openolt.proto and tech_profile.proto |
| OPENOLT_PROTO_VER ?= v4.0.3 |
| |
| # Variables used for Inband build |
| INBAND = "n" |
| VLAN_ID = 4093 |
| |
| # NNI ports speed setting |
| PORT_100G_SPEED ?= 100000 |
| PORT_25G_SPEED ?= 25000 |
| |
| # Build directory |
| BUILD_DIR = build |
| |
| # initialiaze path of protoc binary |
| protoc-bin = $(shell which protoc) |
| |
| # initialiaze path of grpc_cpp_plugin binary |
| grpc-cpp-plugin-bin = $(shell which grpc_cpp_plugin) |
| |
| USER := $(shell echo $(USER)) |
| # |
| ######################################################################## |
| ## |
| ## |
| ## Initialize various build flags |
| ## |
| ## |
| HOST_SYSTEM = $(shell uname | cut -f 1 -d_) |
| SYSTEM ?= $(HOST_SYSTEM) |
| |
| VERSION ?= $(shell cat ../VERSION) |
| |
| #set ref and commit date only if committed |
| LABEL_VCS_URL ?= $(shell git remote get-url $(shell git remote)) |
| LABEL_VCS_REF = $(shell git rev-parse HEAD) |
| LABEL_BUILD_DATE ?= $(shell date -u "+%Y-%m-%dT%H:%M:%SZ") |
| LABEL_COMMIT_DATE = $(shell git show -s --format=%cd --date=iso-strict HEAD) |
| |
| LIBGRPC_PATH=$(shell pkg-config --libs-only-L grpc | sed s/-L// | sed s/\ //g) |
| LIBZ_PATH=$(shell pkg-config --libs-only-L zlib | sed s/-L// | sed s/\ //g) |
| LIBPROTOBUF_PATH=$(shell PKG_CONFIG_ALLOW_SYSTEM_LIBS=true pkg-config --libs-only-L protobuf | sed s/-L// | sed s/\ //g) |
| |
| PCAPPLUSPLUS_INCLUDE_PATH=-I/usr/local/include/pcapplusplus/ |
| PCAPPLUSPLUS_LIB_PATH=-lPcap++ -lPacket++ -lCommon++ |
| |
| CXX = @CXX@-4.9 |
| CXXFLAGS += @CXXFLAGS@ |
| CXXFLAGS += $(shell pkg-config --cflags-only-I grpc++) |
| CXXFLAGS += $(PCAPPLUSPLUS_INCLUDE_PATH) |
| CPPFLAGS += @CPPFLAGS@ |
| CPPFLAGS += `pkg-config --cflags protobuf grpc` |
| |
| # Enabling SCALE_AND_PERF for higher performance and scaling to 512 subscribers. Enabling the flag will |
| # disable the handling in FLOW_CHECKER and also disable flow statistics |
| # Setting SW_UTIL_SHELL=y will enable QAX debug shell when compiling for Broadcom chip based OLT |
| CPPFLAGS += -DVERSION=\"$(VERSION)\" -DBAL_VER=\"$(BAL_VER)\" -DLABEL_VCS_URL=\"$(LABEL_VCS_URL)\" \ |
| -DLABEL_VCS_REF=\"$(LABEL_VCS_REF)\" -DLABEL_BUILD_DATE=\"$(LABEL_BUILD_DATE)\" \ |
| -DLABEL_COMMIT_DATE=\"$(LABEL_COMMIT_DATE)\" -DFLOW_CHECKER -USCALE_AND_PERF -DSW_UTIL_SHELL=n |
| CPPFLAGS += -I./ |
| CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix |
| LDFLAGS += @LDFLAGS@ |
| LDFLAGS += `pkg-config --libs protobuf grpc++ grpc` -ldl -lgpr |
| CXXFLAGSDEVICE = -I./device -I./device/$(OPENOLTDEVICE) -I./device/generic |
| |
| export CXX CXXFLAGS OPENOLT_PROTO_VER |
| |
| ######################################################################## |
| ## |
| ## |
| ## ONL |
| ## |
| ## |
| ONL_REPO = onl |
| ONL_DIR = $(BUILD_DIR)/$(ONL_REPO) |
| onl: |
| if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \ |
| mkdir -p $(ONL_DIR); \ |
| git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux; \ |
| cp download/Makefile.onl $(ONL_DIR)/Makefile; \ |
| install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux; \ |
| make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n; \ |
| else \ |
| if [ "$(INBAND)" = n -a "$$(grep "inband" $(ONL_DIR)/onl_build.mode | cut -d= -f 2)" = y ]; then \ |
| make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n; \ |
| fi; \ |
| fi; |
| onl-force: |
| make -C $(ONL_DIR) $(OPENOLTDEVICE)-$(ONL_KERN_VER_MAJOR) |
| distclean-onl: |
| sudo rm -rf $(ONL_DIR) |
| |
| ######################################################################## |
| ## |
| ## |
| ## Broadcom LIBRARY APIs |
| ## |
| ## |
| BAL_API_DIR = $(BUILD_DIR)/bal-api-$(BAL_API_VER) |
| |
| bal-api-$(BAL_API_VER): |
| if [ ! -d "$(BAL_API_DIR)" ]; then \ |
| mkdir -p $(BAL_API_DIR); \ |
| git clone https://github.com/balapi/bal-api-$(BAL_API_VER).git $(BAL_API_DIR); \ |
| fi; |
| bal-api-clean: |
| rm $(BAL_API_DIR) |
| |
| ######################################################################## |
| ## |
| ## |
| ## BAL |
| ## |
| ## |
| BAL_ZIP = SW-BCM686OLT_$(subst .,_,$(BAL_VER)).tgz |
| SDK_ZIP = sdk-all-$(SDK_VER).tar.gz |
| ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch |
| BAL_DIR = $(BUILD_DIR)/$(OPENOLTDEVICE)-bal |
| BCM_SDK = $(BAL_DIR)/switch_sdk/$(SDK_VER) |
| BALLIBDIR = $(BAL_DIR)/build/host_reference/host_api |
| BALLIBNAME = bal_host_api |
| BAL_INC = -I$(BAL_DIR)/host_driver/bal/bal_include \ |
| -I$(BAL_DIR)/host_driver/topology \ |
| -I$(BAL_DIR)/host_driver/utils \ |
| -I$(BAL_DIR)/host_driver/api \ |
| -I$(BAL_DIR)/host_driver/metadata \ |
| -I$(BAL_DIR)/host_customized/os_abstraction \ |
| -I$(BAL_DIR)/host_customized/os_abstraction/posix \ |
| -I$(BAL_DIR)/host_customized/config \ |
| -I$(BAL_DIR)/host_driver/api_conn_mgr \ |
| -I$(BAL_DIR)/host_driver/conn_mgr \ |
| -I$(BAL_DIR)/host_driver/api/host/topology \ |
| -I$(BAL_DIR)/host_reference/cli \ |
| -I$(BAL_DIR)/host_reference/api_cli \ |
| -I$(BAL_API_DIR)/include \ |
| -I$(BAL_API_DIR)/include/object_model |
| CXXFLAGS += $(BAL_INC) -I $(BAL_DIR)/lib/cmdline |
| CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST -DENABLE_LOG -DENABLE_CLI |
| PORT_SPEED_FILE = $(BAL_DIR)/switch_sdk/$(SDK_VER)/rc/$(OPENOLTDEVICE)/board_files/broadcom/port_speed.soc |
| |
| sdk: onl bal-api-$(BAL_API_VER) |
| ifeq ("$(wildcard $(BAL_DIR))","") |
| mkdir $(BAL_DIR) |
| tar zxvf download/$(BAL_ZIP) --strip 1 -C $(BAL_DIR) |
| cp download/$(SDK_ZIP) $(BCM_SDK) |
| chmod -R 744 $(BAL_DIR) |
| cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR) |
| ifeq ("$(strip $(OPENOLTDEVICE))","asfvolt16") |
| echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE) |
| else ifeq ("$(strip $(OPENOLTDEVICE))","asgvolt64") |
| echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE) |
| echo "setenv port_speed_for_25 $(PORT_25G_SPEED)" >> $(PORT_SPEED_FILE) |
| endif |
| make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) ONL_DIR=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux OPEN_SOURCE=y |
| make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board |
| endif |
| |
| bal-release: sdk |
| make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board |
| |
| bal-clean: |
| make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) clean_all |
| |
| ######################################################################## |
| ## |
| ## |
| ## OpenOLT API |
| ## |
| ## |
| OPENOLT_PROTOS_DIR = ../protos |
| OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a |
| CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I./device -I./device/$(OPENOLTDEVICE) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens |
| protos: |
| make -C $(OPENOLT_PROTOS_DIR) all |
| protos-clean: |
| -make -C $(OPENOLT_PROTOS_DIR) clean |
| |
| ######################################################################## |
| ## |
| ## |
| ## common |
| ## |
| ## |
| |
| # A hack to force a re-build of common/main.cc everytime. |
| # This is needed to bake in the git VCS information in the openolt binary |
| # at the time of building the openolt package. |
| common/main.o: .FORCE |
| .FORCE: |
| $(CXX) $(CXXFLAGS) $(CPPFLAGS) -I./common -c common/main.cc -o common/main.o |
| |
| common/%.o: common/%.cc |
| $(CXX) $(CXXFLAGS) $(CPPFLAGS) -I./common -c $< -o $@ |
| |
| ######################################################################## |
| ## |
| ## |
| ## device |
| ## |
| ## |
| device/$(OPENOLTDEVICE)/%.o: device/$(OPENOLTDEVICE)/%.cc |
| $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@ |
| |
| device/generic/%.o: device/generic/%.cc |
| $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@ |
| |
| ######################################################################## |
| ## |
| ## |
| ## openolt |
| ## |
| ## |
| OLT_SW_UPGRADE_DIR = ../olt-sw-upgrade |
| SRCS = $(wildcard src/*.cc) $(wildcard common/*.cc) $(wildcard device/$(OPENOLTDEVICE)/*.cc) |
| ANSIBLE_DIR = /etc/ansible |
| OBJS = $(SRCS:.cc=.o) |
| DEPS = $(SRCS:.cc=.d) |
| .DEFAULT_GOAL := all |
| all: $(BUILD_DIR)/openolt |
| $(BUILD_DIR)/openolt: sdk protos $(OBJS) |
| $(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $@ -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc) $(PCAPPLUSPLUS_LIB_PATH) |
| ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/$(OPENOLTDEVICE)/release/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz $(BUILD_DIR)/. |
| ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_reference/host_api/strip/libbal_host_api.so $(BUILD_DIR)/. |
| ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_driver/dev_mgmt_daemon/dev_mgmt_daemon $(BUILD_DIR)/. |
| ln -sf $(LIBGRPC_PATH)/libz.so.1 $(BUILD_DIR)/libz.so.1 |
| ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 $(BUILD_DIR)/libstdc++.so.6 |
| strip $(BUILD_DIR)/openolt |
| echo "inband=n" > $(ONL_DIR)/onl_build.mode |
| if [ $(INBAND) = y ]; then \ |
| echo "Building ONL+BAL+OpenoltAgent allinone image"; \ |
| make deb; \ |
| make inband-onl; \ |
| fi; |
| |
| src/%.o: src/%.cc |
| $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) $(CPPFLAGS) -I./common -c $< -o $@ |
| |
| deb: |
| cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz device/$(OPENOLTDEVICE)/mkdebian/debian |
| cp $(BUILD_DIR)/openolt device/$(OPENOLTDEVICE)/mkdebian/debian |
| cp $(BUILD_DIR)/libz.so.1 device/$(OPENOLTDEVICE)/mkdebian/debian |
| cp $(BUILD_DIR)/libstdc++.so.6 device/$(OPENOLTDEVICE)/mkdebian/debian |
| cp $(BUILD_DIR)/libbal_host_api.so device/$(OPENOLTDEVICE)/mkdebian/debian |
| cp -a scripts/init.d device/$(OPENOLTDEVICE)/mkdebian/debian |
| cp -a scripts/watchdog device/$(OPENOLTDEVICE)/mkdebian/debian |
| cd device/$(OPENOLTDEVICE)/mkdebian && ./build_$(OPENOLTDEVICE)_deb.sh |
| mv device/$(OPENOLTDEVICE)/*.deb $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb |
| make deb-cleanup |
| |
| inband-onl: |
| # Clean previous ONL build and build freshly |
| sudo rm -rf $(ONL_DIR) |
| mkdir -p $(ONL_DIR) |
| git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux |
| cp download/Makefile.onl $(ONL_DIR)/Makefile |
| install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux |
| |
| # Check ONL commit equals to Inband patch commit |
| ONL_COMMIT_ID=$(awk \'/COMMIT_ID = /{print $0}\' $(ONL_DIR)/Makefile | awk -F \"=\" \'{print $2}\') |
| INBAND_PATCH_COMMIT_ID=$(echo cp $(TOP_DIR)/inband/patch/*.patch | cut -d- -f 2 | cut -d. -f 1) |
| if [ "$(ONL_COMMIT_ID)" = "$(INBAND_PATCH_COMMIT_ID)" ]; then \ |
| echo "ONL commit and inband patch commit matched."; \ |
| cp $(TOP_DIR)/inband/patch/*.patch $(ONL_DIR)/OpenNetworkLinux; \ |
| else \ |
| echo "ONL commit and inband patch commit does not match. Exiting."; \ |
| exit 1; \ |
| fi; |
| |
| # Update inband.config file with VLAN ID argument passed |
| sed -i 's/asfvolt16_vlan_id_eth2=.*/asfvolt16_vlan_id_eth2=$(VLAN_ID)/' $(TOP_DIR)/inband/config/inband.config |
| sed -i 's/asgvolt64_vlan_id_eth1=.*/asgvolt64_vlan_id_eth1=$(VLAN_ID)/' $(TOP_DIR)/inband/config/inband.config |
| |
| # Copy Inband config files and olt startup scripts to ONL source code and build |
| cd $(TOP_DIR) && mkdir -p $(ONL_DIR)/OpenNetworkLinux/bal_packages |
| cp $(TOP_DIR)/inband/scripts/* $(ONL_DIR)/OpenNetworkLinux/bal_packages |
| cp $(TOP_DIR)/inband/config/inband.config $(ONL_DIR)/OpenNetworkLinux/bal_packages |
| cp $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb $(ONL_DIR)/OpenNetworkLinux/bal_packages/openolt_$(OPENOLTDEVICE).deb |
| cp $(OLT_SW_UPGRADE_DIR)/change_labels.sh $(ONL_DIR)/OpenNetworkLinux/bal_packages |
| |
| # Rebuild ONL packed with already built BAL+Openolt debian package |
| make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=y |
| echo "inband=y" > $(ONL_DIR)/onl_build.mode |
| make inband-onl-cleanup |
| # requires 'sudo' privileges |
| |
| ansible: |
| (ONL_INSTALLED_INSTALLER="$(shell find "$$(cd ./build/onl/OpenNetworkLinux/RELEASE/jessie/amd64; pwd)" -name "ONL-onl-*_AMD64_INSTALLED_INSTALLER")"; \ |
| rm -rf $(ANSIBLE_DIR)/roles/upgrade/files; \ |
| mkdir -p $(ANSIBLE_DIR)/roles/upgrade/files; \ |
| cp ../olt-sw-upgrade/install_onl.sh $(ANSIBLE_DIR)/roles/upgrade/files; \ |
| chmod +x $(ANSIBLE_DIR)/roles/upgrade/files/*.sh; \ |
| ln -s $$ONL_INSTALLED_INSTALLER $(ANSIBLE_DIR)/roles/upgrade/files/ONL_INSTALLED_INSTALLER) |
| |
| src/%.o: %.cpp |
| $(CXX) -MMD -c $< -o $@ |
| |
| deb-cleanup: |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).debhelper.log |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).postinst.debhelper |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).postrm.debhelper |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).substvars |
| @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE)/ |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/debhelper-build-stamp |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libz.so.1 |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libstdc++.so.6 |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libbal_host_api.so |
| @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/init.d/ |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/openolt |
| @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz |
| @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/tmp/ |
| @rm -f device/$(OPENOLTDEVICE)/$(OPENOLTDEVICE)_$(BAL_VER)+edgecore-V$(DEV_VER)_amd64.changes |
| |
| inband-onl-cleanup: |
| @rm -f $(ONL_DIR)/OpenNetworkLinux/*.patch |
| @rm -rf $(ONL_DIR)/OpenNetworkLinux/bal_packages |
| |
| clean: protos-clean deb-cleanup |
| @rm -f $(OBJS) $(DEPS) |
| @rm -rf $(OPENOLT_PROTOS_DIR)/googleapis |
| @rm -f $(BUILD_DIR)/libz.so.1 |
| @rm -f $(BUILD_DIR)/libbal_host_api.so |
| @rm -f $(BUILD_DIR)/openolt |
| @rm -f $(BUILD_DIR)/dev_mgmt_daemon |
| @rm -f $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz |
| @rm -f $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb |
| |
| clean-src: protos-clean |
| @rm -f $(OBJS) $(DEPS) |
| |
| distclean: clean-src clean |
| @rm -rf $(BUILD_DIR) |
| |
| .PHONY: onl sdk bal protos inband-onl ansible .FORCE |