| /* |
| * Copyright 2018-present Open Networking Foundation |
| |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <iostream> |
| #include <memory> |
| #include <string> |
| |
| #include "Queue.h" |
| #include <sstream> |
| #include <chrono> |
| #include <thread> |
| #include <bitset> |
| #include <inttypes.h> |
| #include <unistd.h> |
| |
| #include "device.h" |
| #include "core.h" |
| #include "indications.h" |
| #include "stats_collection.h" |
| #include "error_format.h" |
| #include "state.h" |
| #include "utils.h" |
| |
| extern "C" |
| { |
| #include <bcmolt_api.h> |
| #include <bcmolt_host_api.h> |
| #include <bcmolt_api_model_supporting_enums.h> |
| |
| #include <bal_version.h> |
| #include <bcmolt_api_conn_mgr.h> |
| //CLI header files |
| #include <bcmcli_session.h> |
| #include <bcmcli.h> |
| #include <bcm_api_cli.h> |
| |
| #include <bcmos_common.h> |
| #include <bcm_config.h> |
| // FIXME : dependency problem |
| // #include <bcm_common_gpon.h> |
| // #include <bcm_dev_log_task.h> |
| } |
| |
| |
| dev_log_id openolt_log_id = bcm_dev_log_id_register("OPENOLT", DEV_LOG_LEVEL_INFO, DEV_LOG_ID_TYPE_BOTH); |
| dev_log_id omci_log_id = bcm_dev_log_id_register("OMCI", DEV_LOG_LEVEL_INFO, DEV_LOG_ID_TYPE_BOTH); |
| |
| #define BAL_RSC_MANAGER_BASE_TM_SCHED_ID 16384 |
| #define MAX_TM_QUEUE_ID 8192 |
| #define MAX_TM_QMP_ID 16 |
| #define TMQ_MAP_PROFILE_SIZE 8 |
| #define MAX_TM_SCHED_ID 1023 |
| #define MAX_SUBS_TM_SCHED_ID (MAX_SUPPORTED_PON == 16 ? MAX_TM_SCHED_ID-4-16 : MAX_TM_SCHED_ID-10-64) |
| #define EAP_ETHER_TYPE 34958 |
| #define XGS_BANDWIDTH_GRANULARITY 16000 |
| #define GPON_BANDWIDTH_GRANULARITY 32000 |
| #define FILL_ARRAY(ARRAY,START,END,VALUE) for(int i=START;i<END;ARRAY[i++]=VALUE); |
| #define COUNT_OF(array) (sizeof(array) / sizeof(array[0])) |
| |
| #define GET_FLOW_INTERFACE_TYPE(type) \ |
| (type == BCMOLT_FLOW_INTERFACE_TYPE_PON) ? "PON" : \ |
| (type == BCMOLT_FLOW_INTERFACE_TYPE_NNI) ? "NNI" : \ |
| (type == BCMOLT_FLOW_INTERFACE_TYPE_HOST) ? "HOST" : "unknown" |
| #define GET_PKT_TAG_TYPE(type) \ |
| (type == BCMOLT_PKT_TAG_TYPE_UNTAGGED) ? "UNTAG" : \ |
| (type == BCMOLT_PKT_TAG_TYPE_SINGLE_TAG) ? "SINGLE_TAG" : \ |
| (type == BCMOLT_PKT_TAG_TYPE_DOUBLE_TAG) ? "DOUBLE_TAG" : "unknown" |
| |
| static unsigned int num_of_nni_ports = 0; |
| static unsigned int num_of_pon_ports = 0; |
| static std::string intf_technologies[MAX_SUPPORTED_PON]; |
| static const std::string UNKNOWN_TECH("unknown"); |
| static const std::string MIXED_TECH("mixed"); |
| static std::string board_technology(UNKNOWN_TECH); |
| static std::string chip_family(UNKNOWN_TECH); |
| static unsigned int OPENOLT_FIELD_LEN = 200; |
| static std::string firmware_version = "Openolt.2019.07.01"; |
| |
| const uint32_t tm_upstream_sched_id_start = (MAX_SUPPORTED_PON == 16 ? \ |
| MAX_TM_SCHED_ID-3 : MAX_TM_SCHED_ID-9); |
| const uint32_t tm_downstream_sched_id_start = (MAX_SUPPORTED_PON == 16 ? \ |
| tm_upstream_sched_id_start-16 : tm_upstream_sched_id_start-64); |
| |
| /* Max Queue ID supported is 7 so based on priority_q configured for GEMPORTS |
| in TECH PROFILE respective Queue ID from this list will be used for both |
| US and DS Queues*/ |
| const uint32_t queue_id_list[8] = {0, 1, 2, 3, 4, 5, 6, 7}; |
| |
| const std::string upstream = "upstream"; |
| const std::string downstream = "downstream"; |
| bcmolt_oltid dev_id = 0; |
| |
| /* Current session */ |
| static bcmcli_session *current_session; |
| static bcmcli_entry *api_parent_dir; |
| bcmos_bool status_bcm_cli_quit = BCMOS_FALSE; |
| bcmos_task bal_cli_thread; |
| const char *bal_cli_thread_name = "bal_cli_thread"; |
| uint16_t flow_id_counters = 0; |
| int flow_id_data[16384][2]; |
| |
| /* QOS Type has been pre-defined as Fixed Queue but it will be updated based on number of GEMPORTS |
| associated for a given subscriber. If GEM count = 1 for a given subscriber, qos_type will be Fixed Queue |
| else Priority to Queue */ |
| bcmolt_egress_qos_type qos_type = BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE; |
| |
| State state; |
| |
| static std::map<uint32_t, uint32_t> flowid_to_port; // For mapping upstream flows to logical ports |
| static std::map<uint32_t, uint32_t> flowid_to_gemport; // For mapping downstream flows into gemports |
| static std::map<uint32_t, std::set<uint32_t> > port_to_flows; // For mapping logical ports to downstream flows |
| |
| /* This represents the Key to 'sched_map' map. |
| Represents (pon_intf_id, onu_id, uni_id, direction) */ |
| typedef std::tuple<uint32_t, uint32_t, uint32_t, std::string> sched_map_key_tuple; |
| /* 'sched_map' maps sched_map_key_tuple to DBA (Upstream) or |
| Subscriber (Downstream) Scheduler ID */ |
| static std::map<sched_map_key_tuple, int> sched_map; |
| |
| /* This represents the Key to 'sched_qmp_id_map' map. |
| Represents (sched_id, pon_intf_id, onu_id, uni_id) */ |
| typedef std::tuple<uint32_t, uint32_t, uint32_t, uint32_t> sched_qmp_id_map_key_tuple; |
| /* 'sched_qmp_id_map' maps sched_qmp_id_map_key_tuple to TM Queue Mapping Profile ID */ |
| static std::map<sched_qmp_id_map_key_tuple, int> sched_qmp_id_map; |
| /* 'qmp_id_to_qmp_map' maps TM Queue Mapping Profile ID to TM Queue Mapping Profile */ |
| static std::map<int, std::vector < uint32_t > > qmp_id_to_qmp_map; |
| |
| std::bitset<MAX_TM_SCHED_ID> tm_sched_bitset; |
| std::bitset<MAX_TM_QMP_ID> tm_qmp_bitset; |
| |
| static bcmos_fastlock data_lock; |
| |
| #define MIN_ALLOC_ID_GPON 256 |
| #define MIN_ALLOC_ID_XGSPON 1024 |
| |
| static bcmos_errno CreateSched(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, \ |
| uint32_t port_no, uint32_t alloc_id, tech_profile::AdditionalBW additional_bw, uint32_t weight, \ |
| uint32_t priority, tech_profile::SchedulingPolicy sched_policy, |
| tech_profile::TrafficShapingInfo traffic_shaping_info); |
| static bcmos_errno RemoveSched(int intf_id, int onu_id, int uni_id, int alloc_id, std::string direction); |
| static bcmos_errno CreateQueue(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, \ |
| uint32_t priority, uint32_t gemport_id); |
| static bcmos_errno RemoveQueue(std::string direction, int intf_id, int onu_id, int uni_id, uint32_t port_no, int alloc_id); |
| static bcmos_errno CreateDefaultSched(uint32_t intf_id, const std::string direction); |
| static bcmos_errno CreateDefaultQueue(uint32_t intf_id, const std::string direction); |
| |
| uint16_t get_dev_id(void) { |
| return dev_id; |
| } |
| |
| // Stubbed defntion of bcmolt_cfg_get required for unit-test |
| extern bcmos_errno bcmolt_cfg_get_stub(bcmolt_oltid olt_id, void* ptr); |
| |
| /** |
| * Returns the default NNI (Upstream direction) or PON (Downstream direction) scheduler |
| * Every NNI port and PON port have default scheduler. |
| * The NNI0 default scheduler ID is 18432, and NNI1 is 18433 and so on. |
| * Similarly, PON0 default scheduler ID is 16384. PON1 is 16385 and so on. |
| * |
| * @param intf_id NNI or PON interface ID |
| * @param direction "upstream" or "downstream" |
| * |
| * @return default scheduler ID for the given interface. |
| */ |
| static inline int get_default_tm_sched_id(int intf_id, std::string direction) { |
| if (direction.compare(upstream) == 0) { |
| return tm_upstream_sched_id_start + intf_id; |
| } else if (direction.compare(downstream) == 0) { |
| return tm_downstream_sched_id_start + intf_id; |
| } |
| else { |
| OPENOLT_LOG(ERROR, openolt_log_id, "invalid direction - %s\n", direction.c_str()); |
| return 0; |
| } |
| } |
| |
| /** |
| * Gets a unique tm_sched_id for a given intf_id, onu_id, uni_id, gemport_id, direction |
| * The tm_sched_id is locally cached in a map, so that it can rendered when necessary. |
| * VOLTHA replays whole configuration on OLT reboot, so caching locally is not a problem |
| * |
| * @param intf_id NNI or PON intf ID |
| * @param onu_id ONU ID |
| * @param uni_id UNI ID |
| * @param gemport_id GEM Port ID |
| * @param direction Upstream or downstream |
| * |
| * @return tm_sched_id |
| */ |
| uint32_t get_tm_sched_id(int pon_intf_id, int onu_id, int uni_id, std::string direction) { |
| sched_map_key_tuple key(pon_intf_id, onu_id, uni_id, direction); |
| int sched_id = -1; |
| |
| std::map<sched_map_key_tuple, int>::const_iterator it = sched_map.find(key); |
| if (it != sched_map.end()) { |
| sched_id = it->second; |
| } |
| if (sched_id != -1) { |
| return sched_id; |
| } |
| |
| bcmos_fastlock_lock(&data_lock); |
| // Complexity of O(n). Is there better way that can avoid linear search? |
| for (sched_id = 0; sched_id < MAX_TM_SCHED_ID; sched_id++) { |
| if (tm_sched_bitset[sched_id] == 0) { |
| tm_sched_bitset[sched_id] = 1; |
| break; |
| } |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| |
| if (sched_id < MAX_TM_SCHED_ID) { |
| bcmos_fastlock_lock(&data_lock); |
| sched_map[key] = sched_id; |
| bcmos_fastlock_unlock(&data_lock, 0); |
| return sched_id; |
| } else { |
| return -1; |
| } |
| } |
| |
| /** |
| * Free tm_sched_id for a given intf_id, onu_id, uni_id, gemport_id, direction |
| * |
| * @param intf_id NNI or PON intf ID |
| * @param onu_id ONU ID |
| * @param uni_id UNI ID |
| * @param gemport_id GEM Port ID |
| * @param direction Upstream or downstream |
| */ |
| void free_tm_sched_id(int pon_intf_id, int onu_id, int uni_id, std::string direction) { |
| sched_map_key_tuple key(pon_intf_id, onu_id, uni_id, direction); |
| std::map<sched_map_key_tuple, int>::const_iterator it; |
| bcmos_fastlock_lock(&data_lock); |
| it = sched_map.find(key); |
| if (it != sched_map.end()) { |
| tm_sched_bitset[it->second] = 0; |
| sched_map.erase(it); |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| } |
| |
| bool is_tm_sched_id_present(int pon_intf_id, int onu_id, int uni_id, std::string direction) { |
| sched_map_key_tuple key(pon_intf_id, onu_id, uni_id, direction); |
| std::map<sched_map_key_tuple, int>::const_iterator it = sched_map.find(key); |
| if (it != sched_map.end()) { |
| return true; |
| } |
| return false; |
| } |
| |
| /** |
| * Check whether given two tm qmp profiles are equal or not |
| * |
| * @param tmq_map_profileA <vector> TM QUEUE MAPPING PROFILE |
| * @param tmq_map_profileB <vector> TM QUEUE MAPPING PROFILE |
| * |
| * @return boolean, true if given tmq_map_profiles are equal else false |
| */ |
| |
| bool check_tm_qmp_equality(std::vector<uint32_t> tmq_map_profileA, std::vector<uint32_t> tmq_map_profileB) { |
| for (uint32_t i = 0; i < TMQ_MAP_PROFILE_SIZE; i++) { |
| if (tmq_map_profileA[i] != tmq_map_profileB[i]) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| /** |
| * Modifies given queues_pbit_map to parsable format |
| * e.g: Modifes "0b00000101" to "10100000" |
| * |
| * @param queues_pbit_map PBIT MAP configured for each GEM in TECH PROFILE |
| * @param size Queue count |
| * |
| * @return string queues_pbit_map |
| */ |
| std::string* get_valid_queues_pbit_map(std::string *queues_pbit_map, uint32_t size) { |
| for(uint32_t i=0; i < size; i++) { |
| /* Deletes 2 characters from index number 0 */ |
| queues_pbit_map[i].erase(0, 2); |
| std::reverse(queues_pbit_map[i].begin(), queues_pbit_map[i].end()); |
| } |
| return queues_pbit_map; |
| } |
| |
| /** |
| * Creates TM QUEUE MAPPING PROFILE for given queues_pbit_map and queues_priority_q |
| * |
| * @param queues_pbit_map PBIT MAP configured for each GEM in TECH PROFILE |
| * @param queues_priority_q PRIORITY_Q configured for each GEM in TECH PROFILE |
| * @param size Queue count |
| * |
| * @return <vector> TM QUEUE MAPPING PROFILE |
| */ |
| std::vector<uint32_t> get_tmq_map_profile(std::string *queues_pbit_map, uint32_t *queues_priority_q, uint32_t size) { |
| std::vector<uint32_t> tmq_map_profile(8,0); |
| |
| for(uint32_t i=0; i < size; i++) { |
| for (uint32_t j = 0; j < queues_pbit_map[i].size(); j++) { |
| if (queues_pbit_map[i][j]=='1') { |
| tmq_map_profile.at(j) = queue_id_list[queues_priority_q[i]]; |
| } |
| } |
| } |
| return tmq_map_profile; |
| } |
| |
| /** |
| * Gets corresponding tm_qmp_id for a given tmq_map_profile |
| * |
| * @param <vector> TM QUEUE MAPPING PROFILE |
| * |
| * @return tm_qmp_id |
| */ |
| int get_tm_qmp_id(std::vector<uint32_t> tmq_map_profile) { |
| int tm_qmp_id = -1; |
| |
| std::map<int, std::vector < uint32_t > >::const_iterator it = qmp_id_to_qmp_map.begin(); |
| while(it != qmp_id_to_qmp_map.end()) { |
| if(check_tm_qmp_equality(tmq_map_profile, it->second)) { |
| tm_qmp_id = it->first; |
| break; |
| } |
| it++; |
| } |
| return tm_qmp_id; |
| } |
| |
| /** |
| * Updates sched_qmp_id_map with given sched_id, pon_intf_id, onu_id, uni_id, tm_qmp_id |
| * |
| * @param upstream/downstream sched_id |
| * @param PON intf ID |
| * @param onu_id ONU ID |
| * @param uni_id UNI ID |
| * @param tm_qmp_id TM QUEUE MAPPING PROFILE ID |
| */ |
| void update_sched_qmp_id_map(uint32_t sched_id,uint32_t pon_intf_id, uint32_t onu_id, \ |
| uint32_t uni_id, int tm_qmp_id) { |
| bcmos_fastlock_lock(&data_lock); |
| sched_qmp_id_map_key_tuple key(sched_id, pon_intf_id, onu_id, uni_id); |
| sched_qmp_id_map.insert(make_pair(key, tm_qmp_id)); |
| bcmos_fastlock_unlock(&data_lock, 0); |
| } |
| |
| /** |
| * Gets corresponding tm_qmp_id for a given sched_id, pon_intf_id, onu_id, uni_id |
| * |
| * @param upstream/downstream sched_id |
| * @param PON intf ID |
| * @param onu_id ONU ID |
| * @param uni_id UNI ID |
| * |
| * @return tm_qmp_id |
| */ |
| int get_tm_qmp_id(uint32_t sched_id,uint32_t pon_intf_id, uint32_t onu_id, uint32_t uni_id) { |
| sched_qmp_id_map_key_tuple key(sched_id, pon_intf_id, onu_id, uni_id); |
| int tm_qmp_id = -1; |
| |
| std::map<sched_qmp_id_map_key_tuple, int>::const_iterator it = sched_qmp_id_map.find(key); |
| if (it != sched_qmp_id_map.end()) { |
| tm_qmp_id = it->second; |
| } |
| return tm_qmp_id; |
| } |
| |
| /** |
| * Gets a unique tm_qmp_id for a given tmq_map_profile |
| * The tm_qmp_id is locally cached in a map, so that it can be rendered when necessary. |
| * VOLTHA replays whole configuration on OLT reboot, so caching locally is not a problem |
| * |
| * @param upstream/downstream sched_id |
| * @param PON intf ID |
| * @param onu_id ONU ID |
| * @param uni_id UNI ID |
| * @param <vector> TM QUEUE MAPPING PROFILE |
| * |
| * @return tm_qmp_id |
| */ |
| int get_tm_qmp_id(uint32_t sched_id,uint32_t pon_intf_id, uint32_t onu_id, uint32_t uni_id, \ |
| std::vector<uint32_t> tmq_map_profile) { |
| int tm_qmp_id; |
| |
| bcmos_fastlock_lock(&data_lock); |
| /* Complexity of O(n). Is there better way that can avoid linear search? */ |
| for (tm_qmp_id = 0; tm_qmp_id < MAX_TM_QMP_ID; tm_qmp_id++) { |
| if (tm_qmp_bitset[tm_qmp_id] == 0) { |
| tm_qmp_bitset[tm_qmp_id] = 1; |
| break; |
| } |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| |
| if (tm_qmp_id < MAX_TM_QMP_ID) { |
| bcmos_fastlock_lock(&data_lock); |
| qmp_id_to_qmp_map.insert(make_pair(tm_qmp_id, tmq_map_profile)); |
| bcmos_fastlock_unlock(&data_lock, 0); |
| update_sched_qmp_id_map(sched_id, pon_intf_id, onu_id, uni_id, tm_qmp_id); |
| return tm_qmp_id; |
| } else { |
| return -1; |
| } |
| } |
| |
| /** |
| * Free tm_qmp_id for a given sched_id, pon_intf_id, onu_id, uni_id |
| * |
| * @param upstream/downstream sched_id |
| * @param PON intf ID |
| * @param onu_id ONU ID |
| * @param uni_id UNI ID |
| * @param tm_qmp_id TM QUEUE MAPPING PROFILE ID |
| * |
| * @return boolean, true if no more reference for TM QMP else false |
| */ |
| bool free_tm_qmp_id(uint32_t sched_id,uint32_t pon_intf_id, uint32_t onu_id, \ |
| uint32_t uni_id, int tm_qmp_id) { |
| bool result; |
| sched_qmp_id_map_key_tuple key(sched_id, pon_intf_id, onu_id, uni_id); |
| std::map<sched_qmp_id_map_key_tuple, int>::const_iterator it = sched_qmp_id_map.find(key); |
| bcmos_fastlock_lock(&data_lock); |
| if (it != sched_qmp_id_map.end()) { |
| sched_qmp_id_map.erase(it); |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| |
| uint32_t tm_qmp_ref_count = 0; |
| std::map<sched_qmp_id_map_key_tuple, int>::const_iterator it2 = sched_qmp_id_map.begin(); |
| while(it2 != sched_qmp_id_map.end()) { |
| if(it2->second == tm_qmp_id) { |
| tm_qmp_ref_count++; |
| } |
| it2++; |
| } |
| |
| if (tm_qmp_ref_count == 0) { |
| std::map<int, std::vector < uint32_t > >::const_iterator it3 = qmp_id_to_qmp_map.find(tm_qmp_id); |
| if (it3 != qmp_id_to_qmp_map.end()) { |
| bcmos_fastlock_lock(&data_lock); |
| tm_qmp_bitset[tm_qmp_id] = 0; |
| qmp_id_to_qmp_map.erase(it3); |
| bcmos_fastlock_unlock(&data_lock, 0); |
| OPENOLT_LOG(INFO, openolt_log_id, "Reference count for tm qmp profile id %d is : %d. So clearing it\n", \ |
| tm_qmp_id, tm_qmp_ref_count); |
| result = true; |
| } |
| } else { |
| OPENOLT_LOG(INFO, openolt_log_id, "Reference count for tm qmp profile id %d is : %d. So not clearing it\n", \ |
| tm_qmp_id, tm_qmp_ref_count); |
| result = false; |
| } |
| return result; |
| } |
| |
| /** |
| * Returns Scheduler/Queue direction as string |
| * |
| * @param direction as specified in tech_profile.proto |
| */ |
| std::string GetDirection(int direction) { |
| switch (direction) |
| { |
| case tech_profile::Direction::UPSTREAM: return upstream; |
| case tech_profile::Direction::DOWNSTREAM: return downstream; |
| default: OPENOLT_LOG(ERROR, openolt_log_id, "direction-not-supported %d\n", direction); |
| return "direction-not-supported"; |
| } |
| } |
| |
| inline const char *get_flow_acton_command(uint32_t command) { |
| char actions[200] = { }; |
| char *s_actions_ptr = actions; |
| if (command & BCMOLT_ACTION_CMD_ID_ADD_OUTER_TAG) strcat(s_actions_ptr, "ADD_OUTER_TAG|"); |
| if (command & BCMOLT_ACTION_CMD_ID_REMOVE_OUTER_TAG) strcat(s_actions_ptr, "REMOVE_OUTER_TAG|"); |
| if (command & BCMOLT_ACTION_CMD_ID_XLATE_OUTER_TAG) strcat(s_actions_ptr, "TRANSLATE_OUTER_TAG|"); |
| if (command & BCMOLT_ACTION_CMD_ID_ADD_INNER_TAG) strcat(s_actions_ptr, "ADD_INNTER_TAG|"); |
| if (command & BCMOLT_ACTION_CMD_ID_REMOVE_INNER_TAG) strcat(s_actions_ptr, "REMOVE_INNER_TAG|"); |
| if (command & BCMOLT_ACTION_CMD_ID_XLATE_INNER_TAG) strcat(s_actions_ptr, "TRANSLATE_INNER_TAG|"); |
| if (command & BCMOLT_ACTION_CMD_ID_REMARK_OUTER_PBITS) strcat(s_actions_ptr, "REMOVE_OUTER_PBITS|"); |
| if (command & BCMOLT_ACTION_CMD_ID_REMARK_INNER_PBITS) strcat(s_actions_ptr, "REMAKE_INNER_PBITS|"); |
| return s_actions_ptr; |
| } |
| |
| char* openolt_read_sysinfo(const char* field_name, char* field_val) |
| { |
| FILE *fp; |
| /* Prepare the command*/ |
| char command[150]; |
| |
| snprintf(command, sizeof command, "bash -l -c \"onlpdump -s\" | perl -ne 'print $1 if /%s: (\\S+)/'", field_name); |
| /* Open the command for reading. */ |
| fp = popen(command, "r"); |
| if (fp == NULL) { |
| /*The client has to check for a Null field value in this case*/ |
| OPENOLT_LOG(INFO, openolt_log_id, "Failed to query the %s\n", field_name); |
| return field_val; |
| } |
| |
| /*Read the field value*/ |
| if (fp) { |
| uint8_t ret; |
| ret = fread(field_val, OPENOLT_FIELD_LEN, 1, fp); |
| if (ret >= OPENOLT_FIELD_LEN) |
| OPENOLT_LOG(INFO, openolt_log_id, "Read data length %u\n", ret); |
| pclose(fp); |
| } |
| return field_val; |
| } |
| |
| Status GetDeviceInfo_(openolt::DeviceInfo* device_info) { |
| device_info->set_vendor(VENDOR_ID); |
| device_info->set_model(MODEL_ID); |
| device_info->set_hardware_version(""); |
| device_info->set_firmware_version(firmware_version); |
| device_info->set_technology(board_technology); |
| device_info->set_pon_ports(num_of_pon_ports); |
| |
| char serial_number[OPENOLT_FIELD_LEN]; |
| memset(serial_number, '\0', OPENOLT_FIELD_LEN); |
| openolt_read_sysinfo("Serial Number", serial_number); |
| OPENOLT_LOG(INFO, openolt_log_id, "Fetched device serial number %s\n", serial_number); |
| device_info->set_device_serial_number(serial_number); |
| |
| char device_id[OPENOLT_FIELD_LEN]; |
| memset(device_id, '\0', OPENOLT_FIELD_LEN); |
| openolt_read_sysinfo("MAC", device_id); |
| OPENOLT_LOG(INFO, openolt_log_id, "Fetched device mac address %s\n", device_id); |
| device_info->set_device_id(device_id); |
| |
| // Legacy, device-wide ranges. To be deprecated when adapter |
| // is upgraded to support per-interface ranges |
| if (board_technology == "XGS-PON") { |
| device_info->set_onu_id_start(1); |
| device_info->set_onu_id_end(255); |
| device_info->set_alloc_id_start(MIN_ALLOC_ID_XGSPON); |
| device_info->set_alloc_id_end(16383); |
| device_info->set_gemport_id_start(1024); |
| device_info->set_gemport_id_end(65535); |
| device_info->set_flow_id_start(1); |
| device_info->set_flow_id_end(16383); |
| } |
| else if (board_technology == "GPON") { |
| device_info->set_onu_id_start(1); |
| device_info->set_onu_id_end(127); |
| device_info->set_alloc_id_start(MIN_ALLOC_ID_GPON); |
| device_info->set_alloc_id_end(767); |
| device_info->set_gemport_id_start(256); |
| device_info->set_gemport_id_end(4095); |
| device_info->set_flow_id_start(1); |
| device_info->set_flow_id_end(16383); |
| } |
| |
| std::map<std::string, openolt::DeviceInfo::DeviceResourceRanges*> ranges; |
| for (uint32_t intf_id = 0; intf_id < num_of_pon_ports; ++intf_id) { |
| std::string intf_technology = intf_technologies[intf_id]; |
| openolt::DeviceInfo::DeviceResourceRanges *range = ranges[intf_technology]; |
| if(range == nullptr) { |
| range = device_info->add_ranges(); |
| ranges[intf_technology] = range; |
| range->set_technology(intf_technology); |
| |
| if (intf_technology == "XGS-PON") { |
| openolt::DeviceInfo::DeviceResourceRanges::Pool* pool; |
| |
| pool = range->add_pools(); |
| pool->set_type(openolt::DeviceInfo::DeviceResourceRanges::Pool::ONU_ID); |
| pool->set_sharing(openolt::DeviceInfo::DeviceResourceRanges::Pool::DEDICATED_PER_INTF); |
| pool->set_start(1); |
| pool->set_end(255); |
| |
| pool = range->add_pools(); |
| pool->set_type(openolt::DeviceInfo::DeviceResourceRanges::Pool::ALLOC_ID); |
| pool->set_sharing(openolt::DeviceInfo::DeviceResourceRanges::Pool::SHARED_BY_ALL_INTF_SAME_TECH); |
| pool->set_start(1024); |
| pool->set_end(16383); |
| |
| pool = range->add_pools(); |
| pool->set_type(openolt::DeviceInfo::DeviceResourceRanges::Pool::GEMPORT_ID); |
| pool->set_sharing(openolt::DeviceInfo::DeviceResourceRanges::Pool::SHARED_BY_ALL_INTF_ALL_TECH); |
| pool->set_start(1024); |
| pool->set_end(65535); |
| |
| pool = range->add_pools(); |
| pool->set_type(openolt::DeviceInfo::DeviceResourceRanges::Pool::FLOW_ID); |
| pool->set_sharing(openolt::DeviceInfo::DeviceResourceRanges::Pool::SHARED_BY_ALL_INTF_ALL_TECH); |
| pool->set_start(1); |
| pool->set_end(16383); |
| } |
| else if (intf_technology == "GPON") { |
| openolt::DeviceInfo::DeviceResourceRanges::Pool* pool; |
| |
| pool = range->add_pools(); |
| pool->set_type(openolt::DeviceInfo::DeviceResourceRanges::Pool::ONU_ID); |
| pool->set_sharing(openolt::DeviceInfo::DeviceResourceRanges::Pool::DEDICATED_PER_INTF); |
| pool->set_start(1); |
| pool->set_end(127); |
| |
| pool = range->add_pools(); |
| pool->set_type(openolt::DeviceInfo::DeviceResourceRanges::Pool::ALLOC_ID); |
| pool->set_sharing(openolt::DeviceInfo::DeviceResourceRanges::Pool::SHARED_BY_ALL_INTF_SAME_TECH); |
| pool->set_start(256); |
| pool->set_end(757); |
| |
| pool = range->add_pools(); |
| pool->set_type(openolt::DeviceInfo::DeviceResourceRanges::Pool::GEMPORT_ID); |
| pool->set_sharing(openolt::DeviceInfo::DeviceResourceRanges::Pool::SHARED_BY_ALL_INTF_ALL_TECH); |
| pool->set_start(256); |
| pool->set_end(4095); |
| |
| pool = range->add_pools(); |
| pool->set_type(openolt::DeviceInfo::DeviceResourceRanges::Pool::FLOW_ID); |
| pool->set_sharing(openolt::DeviceInfo::DeviceResourceRanges::Pool::SHARED_BY_ALL_INTF_ALL_TECH); |
| pool->set_start(1); |
| pool->set_end(16383); |
| } |
| } |
| |
| range->add_intf_ids(intf_id); |
| } |
| |
| // FIXME: Once dependency problem is fixed |
| // device_info->set_pon_ports(num_of_pon_ports); |
| // device_info->set_onu_id_end(XGPON_NUM_OF_ONUS - 1); |
| // device_info->set_alloc_id_start(1024); |
| // device_info->set_alloc_id_end(XGPON_NUM_OF_ALLOC_IDS * num_of_pon_ports ? - 1); |
| // device_info->set_gemport_id_start(XGPON_MIN_BASE_SERVICE_PORT_ID); |
| // device_info->set_gemport_id_end(XGPON_NUM_OF_GEM_PORT_IDS_PER_PON * num_of_pon_ports ? - 1); |
| // device_info->set_pon_ports(num_of_pon_ports); |
| |
| return Status::OK; |
| } |
| |
| Status pushOltOperInd(uint32_t intf_id, const char *type, const char *state) |
| { |
| openolt::Indication ind; |
| openolt::IntfOperIndication* intf_oper_ind = new openolt::IntfOperIndication; |
| |
| intf_oper_ind->set_type(type); |
| intf_oper_ind->set_intf_id(intf_id); |
| intf_oper_ind->set_oper_state(state); |
| ind.set_allocated_intf_oper_ind(intf_oper_ind); |
| oltIndQ.push(ind); |
| return Status::OK; |
| } |
| |
| #define CLI_HOST_PROMPT_FORMAT "BCM.%u> " |
| |
| /* Build CLI prompt */ |
| static void openolt_cli_get_prompt_cb(bcmcli_session *session, char *buf, uint32_t max_len) |
| { |
| snprintf(buf, max_len, CLI_HOST_PROMPT_FORMAT, dev_id); |
| } |
| |
| static int _bal_apiend_cli_thread_handler(long data) |
| { |
| char init_string[]="\n"; |
| bcmcli_session *sess = current_session; |
| bcmos_task_parm bal_cli_task_p_dummy; |
| |
| /* Switch to interactive mode if not stopped in the init script */ |
| if (!bcmcli_is_stopped(sess)) |
| { |
| /* Force a CLI command prompt |
| * The string passed into the parse function |
| * must be modifiable, so a string constant like |
| * bcmcli_parse(current_session, "\n") will not |
| * work. |
| */ |
| bcmcli_parse(sess, init_string); |
| |
| /* Process user input until EOF or quit command */ |
| bcmcli_driver(sess); |
| }; |
| OPENOLT_LOG(INFO, openolt_log_id, "BAL API End CLI terminated\n"); |
| |
| /* Cleanup */ |
| bcmcli_session_close(current_session); |
| bcmcli_token_destroy(NULL); |
| return 0; |
| } |
| |
| /* Init API CLI commands for the current device */ |
| bcmos_errno bcm_openolt_api_cli_init(bcmcli_entry *parent_dir, bcmcli_session *session) |
| { |
| bcmos_errno rc; |
| |
| api_parent_dir = parent_dir; |
| |
| rc = bcm_api_cli_set_commands(session); |
| |
| #ifdef BCM_SUBSYSTEM_HOST |
| /* Subscribe for device change indication */ |
| rc = rc ? rc : bcmolt_olt_sel_ind_register(_api_cli_olt_change_ind); |
| #endif |
| |
| return rc; |
| } |
| |
| static bcmos_errno bcm_cli_quit(bcmcli_session *session, const bcmcli_cmd_parm parm[], uint16_t n_parms) |
| { |
| bcmcli_stop(session); |
| bcmcli_session_print(session, "CLI terminated by 'Quit' command\n"); |
| status_bcm_cli_quit = BCMOS_TRUE; |
| |
| return BCM_ERR_OK; |
| } |
| |
| int get_status_bcm_cli_quit(void) { |
| return status_bcm_cli_quit; |
| } |
| |
| bcmos_errno bcmolt_apiend_cli_init() { |
| bcmos_errno ret; |
| bcmos_task_parm bal_cli_task_p = {}; |
| bcmos_task_parm bal_cli_task_p_dummy; |
| |
| /** before creating the task, check if it is already created by the other half of BAL i.e. Core side */ |
| if (BCM_ERR_OK != bcmos_task_query(&bal_cli_thread, &bal_cli_task_p_dummy)) |
| { |
| /* Create BAL CLI thread */ |
| bal_cli_task_p.name = bal_cli_thread_name; |
| bal_cli_task_p.handler = _bal_apiend_cli_thread_handler; |
| bal_cli_task_p.priority = TASK_PRIORITY_CLI; |
| |
| ret = bcmos_task_create(&bal_cli_thread, &bal_cli_task_p); |
| if (BCM_ERR_OK != ret) |
| { |
| bcmos_printf("Couldn't create BAL API end CLI thread\n"); |
| return ret; |
| } |
| } |
| } |
| |
| Status Enable_(int argc, char *argv[]) { |
| bcmos_errno err; |
| bcmolt_host_init_parms init_parms = {}; |
| init_parms.transport.type = BCM_HOST_API_CONN_LOCAL; |
| unsigned int failed_enable_device_cnt = 0; |
| |
| if (!state.is_activated()) { |
| |
| vendor_init(); |
| /* Initialize host subsystem */ |
| err = bcmolt_host_init(&init_parms); |
| if (BCM_ERR_OK != err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to init OLT\n"); |
| return bcm_to_grpc_err(err, "Failed to init OLT"); |
| } |
| |
| bcmcli_session_parm mon_session_parm; |
| /* Create CLI session */ |
| memset(&mon_session_parm, 0, sizeof(mon_session_parm)); |
| mon_session_parm.get_prompt = openolt_cli_get_prompt_cb; |
| mon_session_parm.access_right = BCMCLI_ACCESS_ADMIN; |
| bcmos_errno rc = bcmcli_session_open(&mon_session_parm, ¤t_session); |
| BUG_ON(rc != BCM_ERR_OK); |
| |
| /* API CLI */ |
| bcm_openolt_api_cli_init(NULL, current_session); |
| |
| /* Add quit command */ |
| BCMCLI_MAKE_CMD_NOPARM(NULL, "quit", "Quit", bcm_cli_quit); |
| |
| err = bcmolt_apiend_cli_init(); |
| if (BCM_ERR_OK != err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to add apiend init\n"); |
| return bcm_to_grpc_err(err, "Failed to add apiend init"); |
| } |
| |
| bcmos_fastlock_init(&data_lock, 0); |
| OPENOLT_LOG(INFO, openolt_log_id, "Enable OLT - %s-%s\n", VENDOR_ID, MODEL_ID); |
| |
| //check BCM daemon is connected or not |
| Status status = check_connection(); |
| if (!status.ok()) |
| return status; |
| else { |
| Status status = SubscribeIndication(); |
| if (!status.ok()) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "SubscribeIndication failed - %s : %s\n", |
| grpc_status_code_to_string(status.error_code()).c_str(), |
| status.error_message().c_str()); |
| return status; |
| } |
| |
| //check BAL state in initial stage |
| status = check_bal_ready(); |
| if (!status.ok()) |
| return status; |
| } |
| |
| { |
| bcmos_errno err; |
| bcmolt_odid dev; |
| OPENOLT_LOG(INFO, openolt_log_id, "Enabling PON %d Devices ... \n", BCM_MAX_DEVS_PER_LINE_CARD); |
| for (dev = 0; dev < BCM_MAX_DEVS_PER_LINE_CARD; dev++) { |
| bcmolt_device_cfg dev_cfg = { }; |
| bcmolt_device_key dev_key = { }; |
| dev_key.device_id = dev; |
| BCMOLT_CFG_INIT(&dev_cfg, device, dev_key); |
| BCMOLT_MSG_FIELD_GET(&dev_cfg, system_mode); |
| err = bcmolt_cfg_get(dev_id, &dev_cfg.hdr); |
| if (err == BCM_ERR_NOT_CONNECTED) { |
| bcmolt_device_key key = {.device_id = dev}; |
| bcmolt_device_connect oper; |
| BCMOLT_OPER_INIT(&oper, device, connect, key); |
| if (MODEL_ID == "asfvolt16") { |
| BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI); |
| BCMOLT_MSG_FIELD_SET (&oper, system_mode, BCMOLT_SYSTEM_MODE_XGS__2_X); |
| } else if (MODEL_ID == "asgvolt64") { |
| BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI); |
| BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_FOUR_TO_ONE); |
| BCMOLT_MSG_FIELD_SET (&oper, system_mode, BCMOLT_SYSTEM_MODE_GPON__16_X); |
| } |
| err = bcmolt_oper_submit(dev_id, &oper.hdr); |
| if (err) { |
| failed_enable_device_cnt ++; |
| OPENOLT_LOG(ERROR, openolt_log_id, "Enable PON device %d failed, err %d\n", dev, err); |
| if (failed_enable_device_cnt == BCM_MAX_DEVS_PER_LINE_CARD) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "failed to enable all the pon ports\n"); |
| return Status(grpc::StatusCode::INTERNAL, "Failed to activate all PON ports"); |
| } |
| } |
| bcmos_usleep(200000); |
| } |
| else { |
| OPENOLT_LOG(WARNING, openolt_log_id, "PON deivce %d already connected\n", dev); |
| state.activate(); |
| } |
| } |
| init_stats(); |
| } |
| } |
| |
| /* Start CLI */ |
| OPENOLT_LOG(INFO, def_log_id, "Starting CLI\n"); |
| //If already enabled, generate an extra indication ???? |
| return Status::OK; |
| } |
| |
| Status Disable_() { |
| // bcmbal_access_terminal_cfg acc_term_obj; |
| // bcmbal_access_terminal_key key = { }; |
| // |
| // if (state::is_activated) { |
| // std::cout << "Disable OLT" << std::endl; |
| // key.access_term_id = DEFAULT_ATERM_ID; |
| // BCMBAL_CFG_INIT(&acc_term_obj, access_terminal, key); |
| // BCMBAL_CFG_PROP_SET(&acc_term_obj, access_terminal, admin_state, BCMBAL_STATE_DOWN); |
| // bcmos_errno err = bcmbal_cfg_set(DEFAULT_ATERM_ID, &(acc_term_obj.hdr)); |
| // if (err) { |
| // std::cout << "ERROR: Failed to disable OLT" << std::endl; |
| // return bcm_to_grpc_err(err, "Failed to disable OLT"); |
| // } |
| // } |
| // //If already disabled, generate an extra indication ???? |
| // return Status::OK; |
| //This fails with Operation Not Supported, bug ??? |
| |
| //TEMPORARY WORK AROUND |
| Status status = SetStateUplinkIf_(nni_intf_id, false); |
| if (status.ok()) { |
| state.deactivate(); |
| OPENOLT_LOG(INFO, openolt_log_id, "Disable OLT, add an extra indication\n"); |
| pushOltOperInd(nni_intf_id, "nni", "up"); |
| } |
| return status; |
| |
| } |
| |
| Status Reenable_() { |
| Status status = SetStateUplinkIf_(0, true); |
| if (status.ok()) { |
| state.activate(); |
| OPENOLT_LOG(INFO, openolt_log_id, "Reenable OLT, add an extra indication\n"); |
| pushOltOperInd(0, "nni", "up"); |
| } |
| return status; |
| } |
| |
| bcmos_errno get_pon_interface_status(bcmolt_interface pon_ni, bcmolt_interface_state *state) { |
| bcmos_errno err; |
| bcmolt_pon_interface_key pon_key; |
| bcmolt_pon_interface_cfg pon_cfg; |
| pon_key.pon_ni = pon_ni; |
| |
| BCMOLT_CFG_INIT(&pon_cfg, pon_interface, pon_key); |
| BCMOLT_FIELD_SET_PRESENT(&pon_cfg.data, pon_interface_cfg_data, state); |
| BCMOLT_FIELD_SET_PRESENT(&pon_cfg.data, pon_interface_cfg_data, itu); |
| err = bcmolt_cfg_get(dev_id, &pon_cfg.hdr); |
| *state = pon_cfg.data.state; |
| return err; |
| } |
| |
| inline uint64_t get_flow_status(uint16_t flow_id, uint16_t flow_type, uint16_t data_id) { |
| bcmos_errno err; |
| bcmolt_flow_key flow_key; |
| bcmolt_flow_cfg flow_cfg; |
| |
| flow_key.flow_id = flow_id; |
| flow_key.flow_type = (bcmolt_flow_type)flow_type; |
| |
| BCMOLT_CFG_INIT(&flow_cfg, flow, flow_key); |
| |
| switch (data_id) { |
| case ONU_ID: //onu_id |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, onu_id); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get onu_id\n"); |
| return err; |
| } |
| return flow_cfg.data.onu_id; |
| case FLOW_TYPE: |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get flow_type\n"); |
| return err; |
| } |
| return flow_cfg.key.flow_type; |
| case SVC_PORT_ID: //svc_port_id |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, svc_port_id); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get svc_port_id\n"); |
| return err; |
| } |
| return flow_cfg.data.svc_port_id; |
| case PRIORITY: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, priority); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get priority\n"); |
| return err; |
| } |
| return flow_cfg.data.priority; |
| case COOKIE: //cookie |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, cookie); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get cookie\n"); |
| return err; |
| } |
| return flow_cfg.data.cookie; |
| case INGRESS_INTF_TYPE: //ingress intf_type |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, ingress_intf); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get ingress intf_type\n"); |
| return err; |
| } |
| return flow_cfg.data.ingress_intf.intf_type; |
| case EGRESS_INTF_TYPE: //egress intf_type |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_intf); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress intf_type\n"); |
| return err; |
| } |
| return flow_cfg.data.egress_intf.intf_type; |
| case INGRESS_INTF_ID: //ingress intf_id |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, ingress_intf); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get ingress intf_id\n"); |
| return err; |
| } |
| return flow_cfg.data.ingress_intf.intf_id; |
| case EGRESS_INTF_ID: //egress intf_id |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_intf); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress intf_id\n"); |
| return err; |
| } |
| return flow_cfg.data.egress_intf.intf_id; |
| case CLASSIFIER_O_VID: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier o_vid\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.o_vid; |
| case CLASSIFIER_O_PBITS: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier o_pbits\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.o_pbits; |
| case CLASSIFIER_I_VID: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier i_vid\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.i_vid; |
| case CLASSIFIER_I_PBITS: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier i_pbits\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.i_pbits; |
| case CLASSIFIER_ETHER_TYPE: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier ether_type\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.ether_type; |
| case CLASSIFIER_IP_PROTO: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier ip_proto\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.ip_proto; |
| case CLASSIFIER_SRC_PORT: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier src_port\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.src_port; |
| case CLASSIFIER_DST_PORT: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier dst_port\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.dst_port; |
| case CLASSIFIER_PKT_TAG_TYPE: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier pkt_tag_type\n"); |
| return err; |
| } |
| return flow_cfg.data.classifier.pkt_tag_type; |
| case EGRESS_QOS_TYPE: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_qos); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress_qos type\n"); |
| return err; |
| } |
| return flow_cfg.data.egress_qos.type; |
| case EGRESS_QOS_QUEUE_ID: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_qos); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress_qos queue_id\n"); |
| return err; |
| } |
| switch (flow_cfg.data.egress_qos.type) { |
| case BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE: |
| return flow_cfg.data.egress_qos.u.fixed_queue.queue_id; |
| case BCMOLT_EGRESS_QOS_TYPE_TC_TO_QUEUE: |
| return flow_cfg.data.egress_qos.u.tc_to_queue.tc_to_queue_id; |
| case BCMOLT_EGRESS_QOS_TYPE_PBIT_TO_TC: |
| return flow_cfg.data.egress_qos.u.pbit_to_tc.tc_to_queue_id; |
| case BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE: |
| return flow_cfg.data.egress_qos.u.priority_to_queue.tm_q_set_id; |
| case BCMOLT_EGRESS_QOS_TYPE_NONE: |
| default: |
| return -1; |
| } |
| case EGRESS_QOS_TM_SCHED_ID: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_qos); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress_qos tm_sched_id\n"); |
| return err; |
| } |
| return flow_cfg.data.egress_qos.tm_sched.id; |
| case ACTION_CMDS_BITMASK: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action cmds_bitmask\n"); |
| return err; |
| } |
| return flow_cfg.data.action.cmds_bitmask; |
| case ACTION_O_VID: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action o_vid\n"); |
| return err; |
| } |
| return flow_cfg.data.action.o_vid; |
| case ACTION_O_PBITS: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action o_pbits\n"); |
| return err; |
| } |
| return flow_cfg.data.action.o_pbits; |
| case ACTION_I_VID: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action i_vid\n"); |
| return err; |
| } |
| return flow_cfg.data.action.i_vid; |
| case ACTION_I_PBITS: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action i_pbits\n"); |
| return err; |
| } |
| return flow_cfg.data.action.i_pbits; |
| case STATE: |
| BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, state); |
| err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get state\n"); |
| return err; |
| } |
| return flow_cfg.data.state; |
| default: |
| return BCM_ERR_INTERNAL; |
| } |
| |
| return err; |
| } |
| |
| Status EnablePonIf_(uint32_t intf_id) { |
| bcmos_errno err = BCM_ERR_OK; |
| bcmolt_pon_interface_cfg interface_obj; |
| bcmolt_pon_interface_key intf_key = {.pon_ni = (bcmolt_interface)intf_id}; |
| bcmolt_pon_interface_set_pon_interface_state pon_interface_set_state; |
| bcmolt_interface_state state; |
| |
| err = get_pon_interface_status((bcmolt_interface)intf_id, &state); |
| if (err == BCM_ERR_OK) { |
| if (state == BCMOLT_INTERFACE_STATE_ACTIVE_WORKING) { |
| OPENOLT_LOG(WARNING, openolt_log_id, "PON interface: %d already enabled\n", intf_id); |
| return Status::OK; |
| } |
| } |
| BCMOLT_CFG_INIT(&interface_obj, pon_interface, intf_key); |
| BCMOLT_OPER_INIT(&pon_interface_set_state, pon_interface, set_pon_interface_state, intf_key); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, discovery.control, BCMOLT_CONTROL_STATE_ENABLE); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, discovery.interval, 5000); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, discovery.onu_post_discovery_mode, |
| BCMOLT_ONU_POST_DISCOVERY_MODE_ACTIVATE); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.los, true); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.onu_alarms, true); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.tiwi, true); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.ack_timeout, true); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.sfi, true); |
| BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.loki, true); |
| BCMOLT_FIELD_SET(&pon_interface_set_state.data, pon_interface_set_pon_interface_state_data, |
| operation, BCMOLT_INTERFACE_OPERATION_ACTIVE_WORKING); |
| |
| err = bcmolt_cfg_set(dev_id, &interface_obj.hdr); |
| if (err != BCM_ERR_OK) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to enable discovery onu, PON interface %d, err %d\n", intf_id, err); |
| return bcm_to_grpc_err(err, "Failed to enable discovery onu"); |
| } |
| err = bcmolt_oper_submit(dev_id, &pon_interface_set_state.hdr); |
| if (err != BCM_ERR_OK) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to enable PON interface: %d\n", intf_id); |
| return bcm_to_grpc_err(err, "Failed to enable PON interface"); |
| } |
| else { |
| OPENOLT_LOG(INFO, openolt_log_id, "Successfully enabled PON interface: %d\n", intf_id); |
| OPENOLT_LOG(INFO, openolt_log_id, "Initializing tm sched creation for PON interface: %d\n", intf_id); |
| CreateDefaultSched(intf_id, downstream); |
| CreateDefaultQueue(intf_id, downstream); |
| } |
| |
| return Status::OK; |
| } |
| |
| Status ProbeDeviceCapabilities_() { |
| bcmos_errno err; |
| bcmolt_device_cfg dev_cfg = { }; |
| bcmolt_device_key dev_key = { }; |
| bcmolt_olt_cfg olt_cfg = { }; |
| bcmolt_olt_key olt_key = { }; |
| bcmolt_topology_map topo_map[BCM_MAX_PONS_PER_OLT] = { }; |
| bcmolt_topology topo = { }; |
| |
| topo.topology_maps.len = BCM_MAX_PONS_PER_OLT; |
| topo.topology_maps.arr = &topo_map[0]; |
| BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key); |
| BCMOLT_MSG_FIELD_GET(&olt_cfg, bal_state); |
| BCMOLT_FIELD_SET_PRESENT(&olt_cfg.data, olt_cfg_data, topology); |
| BCMOLT_CFG_LIST_BUF_SET(&olt_cfg, olt, topo.topology_maps.arr, |
| sizeof(bcmolt_topology_map) * topo.topology_maps.len); |
| err = bcmolt_cfg_get(dev_id, &olt_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "cfg: Failed to query OLT\n"); |
| return bcm_to_grpc_err(err, "cfg: Failed to query OLT"); |
| } |
| |
| num_of_nni_ports = olt_cfg.data.topology.num_switch_ports; |
| num_of_pon_ports = olt_cfg.data.topology.topology_maps.len; |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "OLT capabilitites, oper_state: %s\n", |
| olt_cfg.data.bal_state == BCMOLT_BAL_STATE_BAL_AND_SWITCH_READY |
| ? "up" : "down"); |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "topology nni: %d pon: %d dev: %d\n", |
| num_of_nni_ports, |
| num_of_pon_ports, |
| BCM_MAX_DEVS_PER_LINE_CARD); |
| |
| for (int devid = 0; devid < BCM_MAX_DEVS_PER_LINE_CARD; devid++) { |
| dev_key.device_id = devid; |
| BCMOLT_CFG_INIT(&dev_cfg, device, dev_key); |
| BCMOLT_MSG_FIELD_GET(&dev_cfg, firmware_sw_version); |
| BCMOLT_MSG_FIELD_GET(&dev_cfg, chip_family); |
| BCMOLT_MSG_FIELD_GET(&dev_cfg, system_mode); |
| err = bcmolt_cfg_get(dev_id, &dev_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "device: Failed to query OLT\n"); |
| return bcm_to_grpc_err(err, "device: Failed to query OLT"); |
| } |
| |
| std::string bal_version; |
| bal_version += std::to_string(dev_cfg.data.firmware_sw_version.major) |
| + "." + std::to_string(dev_cfg.data.firmware_sw_version.minor) |
| + "." + std::to_string(dev_cfg.data.firmware_sw_version.revision); |
| firmware_version = "BAL." + bal_version + "__" + firmware_version; |
| |
| switch(dev_cfg.data.system_mode) { |
| case 10: board_technology = "GPON"; FILL_ARRAY(intf_technologies,devid*4,(devid+1)*4,"GPON"); break; |
| case 11: board_technology = "GPON"; FILL_ARRAY(intf_technologies,devid*8,(devid+1)*8,"GPON"); break; |
| case 12: board_technology = "GPON"; FILL_ARRAY(intf_technologies,devid*16,(devid+1)*16,"GPON"); break; |
| case 13: board_technology = "XGPON"; FILL_ARRAY(intf_technologies,devid*2,(devid+1)*2,"XGPON"); break; |
| case 14: board_technology = "XGPON"; FILL_ARRAY(intf_technologies,devid*4,(devid+1)*4,"XGPON"); break; |
| case 15: board_technology = "XGPON"; FILL_ARRAY(intf_technologies,devid*8,(devid+1)*8,"XGPON"); break; |
| case 16: board_technology = "XGPON"; FILL_ARRAY(intf_technologies,devid*16,(devid+1)*16,"XGPON"); break; |
| case 18: board_technology = "XGS-PON"; FILL_ARRAY(intf_technologies,devid*2,(devid+1)*2,"XGS-PON"); break; |
| case 19: board_technology = "XGS-PON"; FILL_ARRAY(intf_technologies,devid*16,(devid+1)*16,"XGS-PON"); break; |
| case 20: board_technology = MIXED_TECH; FILL_ARRAY(intf_technologies,devid*2,(devid+1)*2,MIXED_TECH); break; |
| } |
| |
| switch(dev_cfg.data.chip_family) { |
| case BCMOLT_CHIP_FAMILY_CHIP_FAMILY_6862_X_: chip_family = "Maple"; break; |
| case BCMOLT_CHIP_FAMILY_CHIP_FAMILY_6865_X_: chip_family = "Aspen"; break; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "device %d, pon: %d, version %s object model: %d, family: %s, board_technology: %s\n", |
| devid, BCM_MAX_PONS_PER_DEV, bal_version.c_str(), BAL_API_VERSION, chip_family.c_str(), board_technology.c_str()); |
| |
| bcmos_usleep(500000); |
| } |
| |
| return Status::OK; |
| } |
| #if 0 |
| Status ProbePonIfTechnology_() { |
| // Probe maximum extent possible as configured into BAL driver to determine |
| // which are active in the current BAL topology. And for those |
| // that are active, determine each port's access technology, i.e. "gpon" or "xgspon". |
| for (uint32_t intf_id = 0; intf_id < num_of_pon_ports; ++intf_id) { |
| bcmolt_pon_interface_cfg interface_obj; |
| bcmolt_pon_interface_key interface_key; |
| |
| interface_key.pon_ni = intf_id; |
| BCMOLT_CFG_INIT(&interface_obj, pon_interface, interface_key); |
| if (board_technology == "XGS-PON") |
| BCMOLT_MSG_FIELD_GET(&interface_obj, xgs_ngpon2_trx); |
| else if (board_technology == "GPON") |
| BCMOLT_MSG_FIELD_GET(&interface_obj, gpon_trx); |
| |
| bcmos_errno err = bcmolt_cfg_get(dev_id, &interface_obj.hdr); |
| if (err != BCM_ERR_OK) { |
| intf_technologies[intf_id] = UNKNOWN_TECH; |
| if(err != BCM_ERR_RANGE) OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get PON config: %d err %d\n", intf_id, err); |
| } |
| else { |
| if (board_technology == "XGS-PON") { |
| switch(interface_obj.data.xgpon_trx.transceiver_type) { |
| case BCMOLT_XGPON_TRX_TYPE_LTH_7222_PC: |
| case BCMOLT_XGPON_TRX_TYPE_WTD_RTXM266_702: |
| case BCMOLT_XGPON_TRX_TYPE_LTH_7222_BC_PLUS: |
| case BCMOLT_XGPON_TRX_TYPE_LTH_7226_PC: |
| case BCMOLT_XGPON_TRX_TYPE_LTH_5302_PC: |
| case BCMOLT_XGPON_TRX_TYPE_LTH_7226_A_PC_PLUS: |
| case BCMOLT_XGPON_TRX_TYPE_D272RR_SSCB_DM: |
| intf_technologies[intf_id] = "XGS-PON"; |
| break; |
| } |
| } else if (board_technology == "GPON") { |
| switch(interface_obj.data.gpon_trx.transceiver_type) { |
| case BCMOLT_TRX_TYPE_SPS_43_48_H_HP_CDE_SD_2013: |
| case BCMOLT_TRX_TYPE_LTE_3680_M: |
| case BCMOLT_TRX_TYPE_SOURCE_PHOTONICS: |
| case BCMOLT_TRX_TYPE_LTE_3680_P_TYPE_C_PLUS: |
| case BCMOLT_TRX_TYPE_LTE_3680_P_BC: |
| intf_technologies[intf_id] = "GPON"; |
| break; |
| } |
| } |
| |
| if (board_technology != UNKNOWN_TECH) { |
| board_technology = intf_technologies[intf_id]; |
| } else if (board_technology != MIXED_TECH && board_technology != intf_technologies[intf_id]) { |
| intf_technologies[intf_id] = MIXED_TECH; |
| } |
| |
| } |
| } |
| return Status::OK; |
| } |
| #endif |
| unsigned NumNniIf_() {return num_of_nni_ports;} |
| unsigned NumPonIf_() {return num_of_pon_ports;} |
| |
| bcmos_errno get_nni_interface_status(bcmolt_interface id, bcmolt_interface_state *state) { |
| bcmos_errno err; |
| bcmolt_nni_interface_key nni_key; |
| bcmolt_nni_interface_cfg nni_cfg; |
| nni_key.id = id; |
| |
| BCMOLT_CFG_INIT(&nni_cfg, nni_interface, nni_key); |
| BCMOLT_FIELD_SET_PRESENT(&nni_cfg.data, nni_interface_cfg_data, state); |
| err = bcmolt_cfg_get(dev_id, &nni_cfg.hdr); |
| *state = nni_cfg.data.state; |
| return err; |
| } |
| |
| Status SetStateUplinkIf_(uint32_t intf_id, bool set_state) { |
| bcmos_errno err = BCM_ERR_OK; |
| bcmolt_nni_interface_key intf_key = {.id = (bcmolt_interface)intf_id}; |
| bcmolt_nni_interface_set_nni_state nni_interface_set_state; |
| bcmolt_interface_state state; |
| |
| err = get_nni_interface_status((bcmolt_interface)intf_id, &state); |
| if (err == BCM_ERR_OK) { |
| if (set_state && state == BCMOLT_INTERFACE_STATE_ACTIVE_WORKING) { |
| OPENOLT_LOG(WARNING, openolt_log_id, "NNI interface: %d already enabled\n", intf_id); |
| OPENOLT_LOG(INFO, openolt_log_id, "Initializing tm sched creation for NNI interface: %d\n", intf_id); |
| CreateDefaultSched(intf_id, upstream); |
| CreateDefaultQueue(intf_id, upstream); |
| return Status::OK; |
| } else if (!set_state && state == BCMOLT_INTERFACE_STATE_INACTIVE) { |
| OPENOLT_LOG(INFO, openolt_log_id, "NNI interface: %d already disabled\n", intf_id); |
| return Status::OK; |
| } |
| } |
| |
| BCMOLT_OPER_INIT(&nni_interface_set_state, nni_interface, set_nni_state, intf_key); |
| if (set_state) { |
| BCMOLT_FIELD_SET(&nni_interface_set_state.data, nni_interface_set_nni_state_data, |
| nni_state, BCMOLT_INTERFACE_OPERATION_ACTIVE_WORKING); |
| } else { |
| BCMOLT_FIELD_SET(&nni_interface_set_state.data, nni_interface_set_nni_state_data, |
| nni_state, BCMOLT_INTERFACE_OPERATION_INACTIVE); |
| } |
| err = bcmolt_oper_submit(dev_id, &nni_interface_set_state.hdr); |
| if (err != BCM_ERR_OK) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to %s NNI interface: %d, err %d\n", |
| (set_state)?"enable":"disable", intf_id, err); |
| return bcm_to_grpc_err(err, "Failed to enable NNI interface"); |
| } |
| else { |
| OPENOLT_LOG(INFO, openolt_log_id, "Successfully %s NNI interface: %d\n", (set_state)?"enable":"disable", intf_id); |
| if (set_state) { |
| OPENOLT_LOG(INFO, openolt_log_id, "Initializing tm sched creation for NNI interface: %d\n", intf_id); |
| CreateDefaultSched(intf_id, upstream); |
| CreateDefaultQueue(intf_id, upstream); |
| } |
| } |
| |
| return Status::OK; |
| } |
| |
| Status DisablePonIf_(uint32_t intf_id) { |
| bcmolt_pon_interface_cfg interface_obj; |
| bcmolt_pon_interface_key interface_key; |
| |
| interface_key.pon_ni = intf_id; |
| BCMOLT_CFG_INIT(&interface_obj, pon_interface, interface_key); |
| BCMOLT_MSG_FIELD_GET(&interface_obj, state); |
| bcmos_errno err = bcmolt_cfg_get(dev_id, &interface_obj.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to disable PON interface: %d\n", intf_id); |
| return bcm_to_grpc_err(err, "Failed to disable PON interface"); |
| } |
| |
| return Status::OK; |
| } |
| |
| Status ActivateOnu_(uint32_t intf_id, uint32_t onu_id, |
| const char *vendor_id, const char *vendor_specific, uint32_t pir) { |
| bcmos_errno err = BCM_ERR_OK; |
| bcmolt_onu_cfg onu_cfg; |
| bcmolt_onu_key onu_key; |
| bcmolt_serial_number serial_number; /**< ONU serial number */ |
| bcmolt_bin_str_36 registration_id; /**< ONU registration ID */ |
| |
| onu_key.onu_id = onu_id; |
| onu_key.pon_ni = intf_id; |
| BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key); |
| BCMOLT_FIELD_SET_PRESENT(&onu_cfg.data, onu_cfg_data, onu_state); |
| err = bcmolt_cfg_get(dev_id, &onu_cfg.hdr); |
| if (err == BCM_ERR_OK) { |
| if ((onu_cfg.data.onu_state == BCMOLT_ONU_STATE_PROCESSING || |
| onu_cfg.data.onu_state == BCMOLT_ONU_STATE_ACTIVE) || |
| (onu_cfg.data.onu_state == BCMOLT_ONU_STATE_INACTIVE && |
| onu_cfg.data.onu_old_state == BCMOLT_ONU_STATE_NOT_CONFIGURED)) |
| return Status::OK; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Enabling ONU %d on PON %d : vendor id %s, \ |
| vendor specific %s, pir %d\n", onu_id, intf_id, vendor_id, |
| vendor_specific_to_str(vendor_specific).c_str(), pir); |
| |
| memcpy(serial_number.vendor_id.arr, vendor_id, 4); |
| memcpy(serial_number.vendor_specific.arr, vendor_specific, 4); |
| BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key); |
| BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.serial_number, serial_number); |
| BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.auto_learning, BCMOS_TRUE); |
| /*set burst and data profiles to fec disabled*/ |
| if (board_technology == "XGS-PON") { |
| BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.xgpon.ranging_burst_profile, 2); |
| BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.xgpon.data_burst_profile, 1); |
| } else if (board_technology == "GPON") { |
| BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.gpon.ds_ber_reporting_interval, 1000000); |
| BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.gpon.omci_port_id, onu_id); |
| } |
| err = bcmolt_cfg_set(dev_id, &onu_cfg.hdr); |
| if (err != BCM_ERR_OK) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to set activate ONU %d on PON %d, err %d\n", onu_id, intf_id, err); |
| return bcm_to_grpc_err(err, "Failed to activate ONU"); |
| } |
| |
| return Status::OK; |
| } |
| |
| Status DeactivateOnu_(uint32_t intf_id, uint32_t onu_id, |
| const char *vendor_id, const char *vendor_specific) { |
| bcmos_errno err = BCM_ERR_OK; |
| bcmolt_onu_set_onu_state onu_oper; /* declare main API struct */ |
| bcmolt_onu_cfg onu_cfg; |
| bcmolt_onu_key onu_key; /**< Object key. */ |
| bcmolt_onu_state onu_state; |
| |
| onu_key.onu_id = onu_id; |
| onu_key.pon_ni = intf_id; |
| BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key); |
| BCMOLT_FIELD_SET_PRESENT(&onu_cfg.data, onu_cfg_data, onu_state); |
| err = bcmolt_cfg_get(dev_id, &onu_cfg.hdr); |
| if (err == BCM_ERR_OK) { |
| switch (onu_state) { |
| case BCMOLT_ONU_OPERATION_ACTIVE: |
| BCMOLT_OPER_INIT(&onu_oper, onu, set_onu_state, onu_key); |
| BCMOLT_FIELD_SET(&onu_oper.data, onu_set_onu_state_data, |
| onu_state, BCMOLT_ONU_OPERATION_INACTIVE); |
| err = bcmolt_oper_submit(dev_id, &onu_oper.hdr); |
| if (err != BCM_ERR_OK) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to \ |
| deactivate ONU %d on PON %d, err %d\n", onu_id, intf_id, err); |
| return bcm_to_grpc_err(err, "Failed to deactivate ONU"); |
| } |
| break; |
| } |
| } |
| |
| return Status::OK; |
| } |
| |
| Status DeleteOnu_(uint32_t intf_id, uint32_t onu_id, |
| const char *vendor_id, const char *vendor_specific) { |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "DeleteOnu ONU %d on PON %d : vendor id %s, vendor specific %s\n", |
| onu_id, intf_id, vendor_id, vendor_specific_to_str(vendor_specific).c_str()); |
| |
| // Need to deactivate before removing it (BAL rules) |
| |
| DeactivateOnu_(intf_id, onu_id, vendor_id, vendor_specific); |
| // Sleep to allow the state to propagate |
| // We need the subscriber terminal object to be admin down before removal |
| // Without sleep the race condition is lost by ~ 20 ms |
| std::this_thread::sleep_for(std::chrono::milliseconds(100)); |
| |
| // TODO: Delete the schedulers and queues. |
| |
| bcmolt_onu_cfg cfg_obj; |
| bcmolt_onu_key key; |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Processing subscriber terminal cfg clear for sub_term_id %d and intf_id %d\n", |
| onu_id, intf_id); |
| |
| key.onu_id = onu_id; |
| key.pon_ni = intf_id; |
| BCMOLT_CFG_INIT(&cfg_obj, onu, key); |
| |
| bcmos_errno err = bcmolt_cfg_clear(dev_id, &cfg_obj.hdr); |
| if (err != BCM_ERR_OK) |
| { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to clear information for BAL subscriber_terminal_id %d, Interface ID %d\n", |
| onu_id, intf_id); |
| return Status(grpc::StatusCode::INTERNAL, "Failed to delete ONU"); |
| } |
| |
| return Status::OK; |
| } |
| |
| #define MAX_CHAR_LENGTH 20 |
| #define MAX_OMCI_MSG_LENGTH 44 |
| Status OmciMsgOut_(uint32_t intf_id, uint32_t onu_id, const std::string pkt) { |
| bcmolt_bin_str buf = {}; |
| bcmolt_onu_cpu_packets omci_cpu_packets; |
| bcmolt_onu_key key; |
| |
| key.pon_ni = intf_id; |
| key.onu_id = onu_id; |
| |
| BCMOLT_OPER_INIT(&omci_cpu_packets, onu, cpu_packets, key); |
| BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, packet_type, BCMOLT_PACKET_TYPE_OMCI); |
| BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, calc_crc, BCMOS_TRUE); |
| |
| // ??? |
| if ((pkt.size()/2) > MAX_OMCI_MSG_LENGTH) { |
| buf.len = MAX_OMCI_MSG_LENGTH; |
| } else { |
| buf.len = pkt.size()/2; |
| } |
| |
| /* Send the OMCI packet using the BAL remote proxy API */ |
| uint16_t idx1 = 0; |
| uint16_t idx2 = 0; |
| uint8_t arraySend[buf.len]; |
| char str1[MAX_CHAR_LENGTH]; |
| char str2[MAX_CHAR_LENGTH]; |
| memset(&arraySend, 0, buf.len); |
| |
| for (idx1=0,idx2=0; idx1<((buf.len)*2); idx1++,idx2++) { |
| sprintf(str1,"%c", pkt[idx1]); |
| sprintf(str2,"%c", pkt[++idx1]); |
| strcat(str1,str2); |
| arraySend[idx2] = strtol(str1, NULL, 16); |
| } |
| |
| buf.arr = (uint8_t *)malloc((buf.len)*sizeof(uint8_t)); |
| memcpy(buf.arr, (uint8_t *)arraySend, buf.len); |
| |
| BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, number_of_packets, 1); |
| BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, packet_size, buf.len); |
| BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, buffer, buf); |
| |
| bcmos_errno err = bcmolt_oper_submit(dev_id, &omci_cpu_packets.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, omci_log_id, "Error sending OMCI message to ONU %d on PON %d\n", onu_id, intf_id); |
| return bcm_to_grpc_err(err, "send OMCI failed"); |
| } else { |
| OPENOLT_LOG(DEBUG, omci_log_id, "OMCI request msg of length %d sent to ONU %d on PON %d : %s\n", |
| buf.len, onu_id, intf_id, pkt.c_str()); |
| } |
| free(buf.arr); |
| |
| return Status::OK; |
| } |
| |
| Status OnuPacketOut_(uint32_t intf_id, uint32_t onu_id, uint32_t port_no, uint32_t gemport_id, const std::string pkt) { |
| bcmolt_pon_interface_cpu_packets pon_interface_cpu_packets; /**< declare main API struct */ |
| bcmolt_pon_interface_key key = {.pon_ni = (bcmolt_interface)intf_id}; /**< declare key */ |
| bcmolt_bin_str buf = {}; |
| bcmolt_gem_port_id gem_port_id_array[1]; |
| bcmolt_gem_port_id_list_u8_max_16 gem_port_list = {}; |
| |
| if (port_no > 0) { |
| bool found = false; |
| if (gemport_id == 0) { |
| bcmos_fastlock_lock(&data_lock); |
| // Map the port_no to one of the flows that owns it to find a gemport_id for that flow. |
| // Pick any flow that is mapped with the same port_no. |
| std::map<uint32_t, std::set<uint32_t> >::const_iterator it = port_to_flows.find(port_no); |
| if (it != port_to_flows.end() && !it->second.empty()) { |
| uint32_t flow_id = *(it->second.begin()); // Pick any flow_id out of the bag set |
| std::map<uint32_t, uint32_t>::const_iterator fit = flowid_to_gemport.find(flow_id); |
| if (fit != flowid_to_gemport.end()) { |
| found = true; |
| gemport_id = fit->second; |
| } |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| |
| if (!found) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Packet out failed to find destination for ONU %d port_no %u on PON %d\n", |
| onu_id, port_no, intf_id); |
| return grpc::Status(grpc::StatusCode::NOT_FOUND, "no flow for port_no"); |
| } |
| OPENOLT_LOG(INFO, openolt_log_id, "Gem port %u found for ONU %d port_no %u on PON %d\n", |
| gemport_id, onu_id, port_no, intf_id); |
| } |
| |
| gem_port_id_array[0] = gemport_id; |
| gem_port_list.len = 1; |
| gem_port_list.arr = gem_port_id_array; |
| buf.len = pkt.size(); |
| buf.arr = (uint8_t *)malloc((buf.len)*sizeof(uint8_t)); |
| memcpy(buf.arr, (uint8_t *)pkt.data(), buf.len); |
| |
| /* init the API struct */ |
| BCMOLT_OPER_INIT(&pon_interface_cpu_packets, pon_interface, cpu_packets, key); |
| BCMOLT_MSG_FIELD_SET(&pon_interface_cpu_packets, packet_type, BCMOLT_PACKET_TYPE_ETH); |
| BCMOLT_MSG_FIELD_SET(&pon_interface_cpu_packets, calc_crc, BCMOS_TRUE); |
| BCMOLT_MSG_FIELD_SET(&pon_interface_cpu_packets, gem_port_list, gem_port_list); |
| BCMOLT_MSG_FIELD_SET(&pon_interface_cpu_packets, buffer, buf); |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Packet out of length %d sent to gemport %d on pon %d port_no %u\n", |
| (uint8_t)pkt.size(), gemport_id, intf_id, port_no); |
| |
| /* call API */ |
| bcmolt_oper_submit(dev_id, &pon_interface_cpu_packets.hdr); |
| } |
| else { |
| //TODO: Port No is 0, it is coming sender requirement. |
| OPENOLT_LOG(INFO, openolt_log_id, "port_no %d onu %d on pon %d\n", |
| port_no, onu_id, intf_id); |
| } |
| free(buf.arr); |
| |
| return Status::OK; |
| } |
| |
| Status UplinkPacketOut_(uint32_t intf_id, const std::string pkt) { |
| bcmolt_flow_key key = {}; /* declare key */ |
| bcmolt_bin_str buffer = {}; |
| bcmolt_flow_send_eth_packet oper; /* declare main API struct */ |
| |
| // TODO: flow_id is currently not passed in UplinkPacket message from voltha. |
| bcmolt_flow_id flow_id = 0; |
| |
| //validate flow_id and find flow_id/flow type: upstream/ingress type: PON/egress type: NNI |
| if (get_flow_status(flow_id, BCMOLT_FLOW_TYPE_UPSTREAM, FLOW_TYPE) == BCMOLT_FLOW_TYPE_UPSTREAM && \ |
| get_flow_status(flow_id, BCMOLT_FLOW_TYPE_UPSTREAM, INGRESS_INTF_TYPE) == BCMOLT_FLOW_INTERFACE_TYPE_PON && \ |
| get_flow_status(flow_id, BCMOLT_FLOW_TYPE_UPSTREAM, EGRESS_INTF_TYPE) == BCMOLT_FLOW_INTERFACE_TYPE_NNI) |
| key.flow_id = flow_id; |
| else { |
| if (flow_id_counters != 0) { |
| for (int flowid=0; flowid < flow_id_counters; flowid++) { |
| int flow_index = flow_id_data[flowid][0]; |
| if (get_flow_status(flow_index, BCMOLT_FLOW_TYPE_UPSTREAM, FLOW_TYPE) == BCMOLT_FLOW_TYPE_UPSTREAM && \ |
| get_flow_status(flow_index, BCMOLT_FLOW_TYPE_UPSTREAM, INGRESS_INTF_TYPE) == BCMOLT_FLOW_INTERFACE_TYPE_PON && \ |
| get_flow_status(flow_index, BCMOLT_FLOW_TYPE_UPSTREAM, EGRESS_INTF_TYPE) == BCMOLT_FLOW_INTERFACE_TYPE_NNI) { |
| key.flow_id = flow_index; |
| break; |
| } |
| } |
| } |
| else { |
| return grpc::Status(grpc::StatusCode::NOT_FOUND, "no flow id found"); |
| } |
| } |
| |
| key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM; /* send from uplink direction */ |
| |
| /* Initialize the API struct. */ |
| BCMOLT_OPER_INIT(&oper, flow, send_eth_packet, key); |
| |
| buffer.len = pkt.size(); |
| buffer.arr = (uint8_t *)malloc((buffer.len)*sizeof(uint8_t)); |
| memcpy(buffer.arr, (uint8_t *)pkt.data(), buffer.len); |
| if (buffer.arr == NULL) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "allocate packet buffer failed\n"); |
| return bcm_to_grpc_err(BCM_ERR_PARM, "allocate packet buffer failed"); |
| } |
| BCMOLT_FIELD_SET(&oper.data, flow_send_eth_packet_data, buffer, buffer); |
| |
| bcmos_errno err = bcmolt_oper_submit(dev_id, &oper.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Error sending packets via nni port %d, flow_id %d err %d\n", intf_id, key.flow_id, err); |
| } else { |
| OPENOLT_LOG(INFO, openolt_log_id, "sent packets to port %d in upstream direction, flow_id %d \n", intf_id, key.flow_id); |
| } |
| |
| return Status::OK; |
| } |
| |
| uint32_t GetPortNum_(uint32_t flow_id) { |
| bcmos_fastlock_lock(&data_lock); |
| uint32_t port_no = 0; |
| std::map<uint32_t, uint32_t >::const_iterator it = flowid_to_port.find(flow_id); |
| if (it != flowid_to_port.end()) { |
| port_no = it->second; |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| return port_no; |
| } |
| |
| #define FLOW_LOG(level,msg,err) \ |
| do { \ |
| OPENOLT_LOG(level, openolt_log_id, "--------> %s (flow_id %d) err: %d <--------\n", msg, key.flow_id, err); \ |
| OPENOLT_LOG(level, openolt_log_id, "intf_id %d, onu_id %d, uni_id %d, port_no %u, cookie %"PRIu64"\n", \ |
| access_intf_id, onu_id, uni_id, port_no, cookie); \ |
| OPENOLT_LOG(level, openolt_log_id, "flow_type %s, queue_id %d, sched_id %d\n", flow_type.c_str(), \ |
| cfg.data.egress_qos.u.fixed_queue.queue_id, cfg.data.egress_qos.tm_sched.id); \ |
| OPENOLT_LOG(level, openolt_log_id, "Ingress(intfd_type %s, intf_id %d), Egress(intf_type %s, intf_id %d)\n", \ |
| GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type), cfg.data.ingress_intf.intf_id, \ |
| GET_FLOW_INTERFACE_TYPE(cfg.data.egress_intf.intf_type), cfg.data.egress_intf.intf_id); \ |
| OPENOLT_LOG(level, openolt_log_id, "classifier(o_vid %d, o_pbits %d, i_vid %d, i_pbits %d, ether type 0x%x)\n", \ |
| c_val.o_vid, c_val.o_pbits, c_val.i_vid, c_val.i_pbits, classifier.eth_type()); \ |
| OPENOLT_LOG(level, openolt_log_id, "classifier(ip_proto 0x%x, gemport_id %d, src_port %d, dst_port %d, pkt_tag_type %s)\n", \ |
| c_val.ip_proto, gemport_id, c_val.src_port, c_val.dst_port, GET_PKT_TAG_TYPE(c_val.pkt_tag_type)); \ |
| OPENOLT_LOG(level, openolt_log_id, "action(cmds_bitmask %s, o_vid %d, o_pbits %d, i_vid %d, i_pbits %d)\n\n", \ |
| get_flow_acton_command(a_val.cmds_bitmask), a_val.o_vid, a_val.o_pbits, a_val.i_vid, a_val.i_pbits); \ |
| } while(0) |
| |
| #define FLOW_PARAM_LOG() \ |
| do { \ |
| OPENOLT_LOG(INFO, openolt_log_id, "--------> flow comparison (now before) <--------\n"); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "flow_id (%d %d)\n", \ |
| key.flow_id, flow_index); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "onu_id (%d %lu)\n", \ |
| cfg.data.onu_id , get_flow_status(flow_index, flow_id_data[flowid][1], ONU_ID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "type (%d %lu)\n", \ |
| key.flow_type, get_flow_status(flow_index, flow_id_data[flowid][1], FLOW_TYPE)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "svc_port_id (%d %lu)\n", \ |
| cfg.data.svc_port_id, get_flow_status(flow_index, flow_id_data[flowid][1], SVC_PORT_ID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "priority (%d %lu)\n", \ |
| cfg.data.priority, get_flow_status(flow_index, flow_id_data[flowid][1], PRIORITY)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "cookie (%lu %lu)\n", \ |
| cfg.data.cookie, get_flow_status(flow_index, flow_id_data[flowid][1], COOKIE)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "ingress intf_type (%s %s)\n", \ |
| GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type), \ |
| GET_FLOW_INTERFACE_TYPE(get_flow_status(flow_index, flow_id_data[flowid][1], INGRESS_INTF_TYPE))); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "ingress intf id (%d %lu)\n", \ |
| cfg.data.ingress_intf.intf_id , get_flow_status(flow_index, flow_id_data[flowid][1], INGRESS_INTF_ID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "egress intf_type (%d %lu)\n", \ |
| cfg.data.egress_intf.intf_type , get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_INTF_TYPE)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "egress intf_id (%d %lu)\n", \ |
| cfg.data.egress_intf.intf_id , get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_INTF_ID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier o_vid (%d %lu)\n", \ |
| c_val.o_vid , get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_O_VID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier o_pbits (%d %lu)\n", \ |
| c_val.o_pbits , get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_O_PBITS)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier i_vid (%d %lu)\n", \ |
| c_val.i_vid , get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_I_VID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier i_pbits (%d %lu)\n", \ |
| c_val.i_pbits , get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_I_PBITS)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier ether_type (0x%x 0x%lx)\n", \ |
| c_val.ether_type , get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_ETHER_TYPE)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier ip_proto (%d %lu)\n", \ |
| c_val.ip_proto , get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_IP_PROTO)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier src_port (%d %lu)\n", \ |
| c_val.src_port , get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_SRC_PORT)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier dst_port (%d %lu)\n", \ |
| c_val.dst_port , get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_DST_PORT)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier pkt_tag_type (%s %s)\n", \ |
| GET_PKT_TAG_TYPE(c_val.pkt_tag_type), \ |
| GET_PKT_TAG_TYPE(get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_PKT_TAG_TYPE))); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier egress_qos type (%d %lu)\n", \ |
| cfg.data.egress_qos.type , get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_QOS_TYPE)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier egress_qos queue_id (%d %lu)\n", \ |
| cfg.data.egress_qos.u.fixed_queue.queue_id, \ |
| get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_QOS_QUEUE_ID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier egress_qos sched_id (%d %lu)\n", \ |
| cfg.data.egress_qos.tm_sched.id, \ |
| get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_QOS_TM_SCHED_ID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "classifier cmds_bitmask (%s %s)\n", \ |
| get_flow_acton_command(a_val.cmds_bitmask), \ |
| get_flow_acton_command(get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_CMDS_BITMASK))); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "action o_vid (%d %lu)\n", \ |
| a_val.o_vid , get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_O_VID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "action i_vid (%d %lu)\n", \ |
| a_val.i_vid , get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_I_VID)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "action o_pbits (%d %lu)\n", \ |
| a_val.o_pbits , get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_O_PBITS)); \ |
| OPENOLT_LOG(INFO, openolt_log_id, "action i_pbits (%d %lu)\n\n", \ |
| a_val.i_pbits, get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_I_PBITS)); \ |
| } while(0) |
| |
| #define FLOW_CHECKER |
| //#define SHOW_FLOW_PARAM |
| |
| Status FlowAdd_(int32_t access_intf_id, int32_t onu_id, int32_t uni_id, uint32_t port_no, |
| uint32_t flow_id, const std::string flow_type, |
| int32_t alloc_id, int32_t network_intf_id, |
| int32_t gemport_id, const ::openolt::Classifier& classifier, |
| const ::openolt::Action& action, int32_t priority_value, uint64_t cookie) { |
| bcmolt_flow_cfg cfg; |
| bcmolt_flow_key key = { }; /**< Object key. */ |
| int32_t o_vid = -1; |
| bool single_tag = false; |
| uint32_t ether_type = 0; |
| bcmolt_classifier c_val = { }; |
| bcmolt_action a_val = { }; |
| bcmolt_tm_queue_ref tm_val = { }; |
| int tm_qmp_id, tm_q_set_id; |
| |
| key.flow_id = flow_id; |
| if (flow_type.compare(upstream) == 0 ) { |
| key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM; |
| } else if (flow_type.compare(downstream) == 0) { |
| key.flow_type = BCMOLT_FLOW_TYPE_DOWNSTREAM; |
| } else { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Invalid flow type %s\n", flow_type.c_str()); |
| return bcm_to_grpc_err(BCM_ERR_PARM, "Invalid flow type"); |
| } |
| |
| BCMOLT_CFG_INIT(&cfg, flow, key); |
| BCMOLT_MSG_FIELD_SET(&cfg, cookie, cookie); |
| |
| if (access_intf_id >= 0 && network_intf_id >= 0) { |
| if (key.flow_type == BCMOLT_FLOW_TYPE_UPSTREAM) { //upstream |
| BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_PON); |
| BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_id, access_intf_id); |
| if (classifier.eth_type() == EAP_ETHER_TYPE || //EAPOL packet |
| (classifier.ip_proto() == 17 && classifier.src_port() == 68 && classifier.dst_port() == 67)) { //DHCP packet |
| BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_HOST); |
| } else { |
| BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_NNI); |
| BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_id, network_intf_id); |
| } |
| } else if (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM) { //downstream |
| BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_NNI); |
| BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_id, network_intf_id); |
| BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_PON); |
| BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_id, access_intf_id); |
| } |
| } else { |
| OPENOLT_LOG(ERROR, openolt_log_id, "flow network setting invalid\n"); |
| return bcm_to_grpc_err(BCM_ERR_PARM, "flow network setting invalid"); |
| } |
| |
| if (onu_id >= 0) { |
| BCMOLT_MSG_FIELD_SET(&cfg, onu_id, onu_id); |
| } |
| if (gemport_id >= 0) { |
| BCMOLT_MSG_FIELD_SET(&cfg, svc_port_id, gemport_id); |
| } |
| if (gemport_id >= 0 && port_no != 0) { |
| bcmos_fastlock_lock(&data_lock); |
| if (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM) { |
| port_to_flows[port_no].insert(key.flow_id); |
| flowid_to_gemport[key.flow_id] = gemport_id; |
| } |
| else |
| { |
| flowid_to_port[key.flow_id] = port_no; |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| } |
| if (priority_value >= 0) { |
| BCMOLT_MSG_FIELD_SET(&cfg, priority, priority_value); |
| } |
| |
| { |
| /* removed by BAL v3.0 |
| if (classifier.o_tpid()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify o_tpid 0x%04x\n", classifier.o_tpid()); |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, classifier, o_tpid, classifier.o_tpid()); |
| } |
| */ |
| if (classifier.o_vid()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify o_vid %d\n", classifier.o_vid()); |
| BCMOLT_FIELD_SET(&c_val, classifier, o_vid, classifier.o_vid()); |
| } |
| /* removed by BAL v3.0 |
| if (classifier.i_tpid()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify i_tpid 0x%04x\n", classifier.i_tpid()); |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, classifier, i_tpid, classifier.i_tpid()); |
| } |
| */ |
| if (classifier.i_vid()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify i_vid %d\n", classifier.i_vid()); |
| BCMOLT_FIELD_SET(&c_val, classifier, i_vid, classifier.i_vid()); |
| } |
| |
| if (classifier.eth_type()) { |
| ether_type = classifier.eth_type(); |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify ether_type 0x%04x\n", classifier.eth_type()); |
| BCMOLT_FIELD_SET(&c_val, classifier, ether_type, classifier.eth_type()); |
| } |
| |
| /* |
| if (classifier.dst_mac()) { |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, classifier, dst_mac, classifier.dst_mac()); |
| } |
| |
| if (classifier.src_mac()) { |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, classifier, src_mac, classifier.src_mac()); |
| } |
| */ |
| |
| if (classifier.ip_proto()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify ip_proto %d\n", classifier.ip_proto()); |
| BCMOLT_FIELD_SET(&c_val, classifier, ip_proto, classifier.ip_proto()); |
| } |
| |
| /* |
| if (classifier.dst_ip()) { |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, classifier, dst_ip, classifier.dst_ip()); |
| } |
| |
| if (classifier.src_ip()) { |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, classifier, src_ip, classifier.src_ip()); |
| } |
| */ |
| |
| if (classifier.src_port()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify src_port %d\n", classifier.src_port()); |
| BCMOLT_FIELD_SET(&c_val, classifier, src_port, classifier.src_port()); |
| } |
| |
| if (classifier.dst_port()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify dst_port %d\n", classifier.dst_port()); |
| BCMOLT_FIELD_SET(&c_val, classifier, dst_port, classifier.dst_port()); |
| } |
| |
| if (!classifier.pkt_tag_type().empty()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify tag_type %s\n", classifier.pkt_tag_type().c_str()); |
| if (classifier.pkt_tag_type().compare("untagged") == 0) { |
| BCMOLT_FIELD_SET(&c_val, classifier, pkt_tag_type, BCMOLT_PKT_TAG_TYPE_UNTAGGED); |
| } else if (classifier.pkt_tag_type().compare("single_tag") == 0) { |
| BCMOLT_FIELD_SET(&c_val, classifier, pkt_tag_type, BCMOLT_PKT_TAG_TYPE_SINGLE_TAG); |
| single_tag = true; |
| |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify o_pbits 0x%x\n", classifier.o_pbits()); |
| BCMOLT_FIELD_SET(&c_val, classifier, o_pbits, classifier.o_pbits()); |
| } else if (classifier.pkt_tag_type().compare("double_tag") == 0) { |
| BCMOLT_FIELD_SET(&c_val, classifier, pkt_tag_type, BCMOLT_PKT_TAG_TYPE_DOUBLE_TAG); |
| |
| OPENOLT_LOG(DEBUG, openolt_log_id, "classify o_pbits 0x%x\n", classifier.o_pbits()); |
| BCMOLT_FIELD_SET(&c_val, classifier, o_pbits, classifier.o_pbits()); |
| } |
| } |
| BCMOLT_MSG_FIELD_SET(&cfg, classifier, c_val); |
| } |
| |
| if (cfg.data.egress_intf.intf_type != BCMOLT_FLOW_INTERFACE_TYPE_HOST) { |
| const ::openolt::ActionCmd& cmd = action.cmd(); |
| |
| if (cmd.add_outer_tag()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "action add o_tag\n"); |
| BCMOLT_FIELD_SET(&a_val, action, cmds_bitmask, BCMOLT_ACTION_CMD_ID_ADD_OUTER_TAG); |
| } |
| |
| if (cmd.remove_outer_tag()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "action pop o_tag\n"); |
| BCMOLT_FIELD_SET(&a_val, action, cmds_bitmask, BCMOLT_ACTION_CMD_ID_REMOVE_OUTER_TAG); |
| } |
| /* removed by BAL v3.0 |
| if (cmd.trap_to_host()) { |
| OPENOLT_LOG(INFO, openolt_log_id, "action trap-to-host\n"); |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, action, cmds_bitmask, BCMBAL_ACTION_CMD_ID_TRAP_TO_HOST); |
| } |
| */ |
| if (action.o_vid()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "action o_vid=%d\n", action.o_vid()); |
| o_vid = action.o_vid(); |
| BCMOLT_FIELD_SET(&a_val, action, o_vid, action.o_vid()); |
| } |
| |
| if (action.o_pbits()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "action o_pbits=0x%x\n", action.o_pbits()); |
| BCMOLT_FIELD_SET(&a_val, action, o_pbits, action.o_pbits()); |
| } |
| /* removed by BAL v3.0 |
| if (action.o_tpid()) { |
| OPENOLT_LOG(INFO, openolt_log_id, "action o_tpid=0x%04x\n", action.o_tpid()); |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, action, o_tpid, action.o_tpid()); |
| } |
| */ |
| if (action.i_vid()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "action i_vid=%d\n", action.i_vid()); |
| BCMOLT_FIELD_SET(&a_val, action, i_vid, action.i_vid()); |
| } |
| |
| if (action.i_pbits()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "action i_pbits=0x%x\n", action.i_pbits()); |
| BCMOLT_FIELD_SET(&a_val, action, i_pbits, action.i_pbits()); |
| } |
| /* removed by BAL v3.0 |
| if (action.i_tpid()) { |
| OPENOLT_LOG(DEBUG, openolt_log_id, "action i_tpid=0x%04x\n", action.i_tpid()); |
| BCMBAL_ATTRIBUTE_PROP_SET(&val, action, i_tpid, action.i_tpid()); |
| } |
| */ |
| BCMOLT_MSG_FIELD_SET(&cfg, action, a_val); |
| } |
| |
| if ((access_intf_id >= 0) && (onu_id >= 0)) { |
| if(single_tag && ether_type == EAP_ETHER_TYPE) { |
| tm_val.sched_id = (flow_type.compare(upstream) == 0) ? \ |
| get_default_tm_sched_id(network_intf_id, upstream) : \ |
| get_default_tm_sched_id(access_intf_id, downstream); |
| tm_val.queue_id = 0; |
| |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.fixed_queue.queue_id, tm_val.queue_id); |
| |
| OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, queue_id = %d, sched_id = %d, intf_type %s\n", \ |
| flow_type.c_str(), tm_val.queue_id, tm_val.sched_id, \ |
| GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
| } else { |
| if (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM) { |
| tm_val.sched_id = get_tm_sched_id(access_intf_id, onu_id, uni_id, downstream); |
| |
| if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) { |
| // Queue 0 on DS subscriber scheduler |
| tm_val.queue_id = 0; |
| |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, qos_type); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.fixed_queue.queue_id, tm_val.queue_id); |
| |
| OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, queue_id = %d, sched_id = %d, intf_type %s\n", \ |
| downstream.c_str(), tm_val.queue_id, tm_val.sched_id, \ |
| GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
| |
| } else if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| /* Fetch TM QMP ID mapped to DS subscriber scheduler */ |
| tm_qmp_id = tm_q_set_id = get_tm_qmp_id(tm_val.sched_id, access_intf_id, onu_id, uni_id); |
| |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, qos_type); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.priority_to_queue.tm_qmp_id, tm_qmp_id); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.priority_to_queue.tm_q_set_id, tm_q_set_id); |
| |
| OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, q_set_id = %d, sched_id = %d, intf_type %s\n", \ |
| downstream.c_str(), tm_q_set_id, tm_val.sched_id, \ |
| GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
| } |
| } else if (key.flow_type == BCMOLT_FLOW_TYPE_UPSTREAM) { |
| // NNI Scheduler ID |
| tm_val.sched_id = get_default_tm_sched_id(network_intf_id, upstream); |
| if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) { |
| // Queue 0 on NNI scheduler |
| tm_val.queue_id = 0; |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, qos_type); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.fixed_queue.queue_id, tm_val.queue_id); |
| |
| OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, queue_id = %d, sched_id = %d, intf_type %s\n", \ |
| upstream.c_str(), tm_val.queue_id, tm_val.sched_id, \ |
| GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
| |
| } else if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| /* Fetch TM QMP ID mapped to US NNI scheduler */ |
| tm_qmp_id = tm_q_set_id = get_tm_qmp_id(tm_val.sched_id, access_intf_id, onu_id, uni_id); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, qos_type); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.priority_to_queue.tm_qmp_id, tm_qmp_id); |
| BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.priority_to_queue.tm_q_set_id, tm_q_set_id); |
| |
| OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, q_set_id = %d, sched_id = %d, intf_type %s\n", \ |
| upstream.c_str(), tm_q_set_id, tm_val.sched_id, \ |
| GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
| } |
| } |
| } |
| } |
| |
| BCMOLT_MSG_FIELD_SET(&cfg, state, BCMOLT_FLOW_STATE_ENABLE); |
| BCMOLT_MSG_FIELD_SET(&cfg, statistics, BCMOLT_CONTROL_STATE_ENABLE); |
| #ifdef FLOW_CHECKER |
| //Flow Checker, To avoid duplicate flow. |
| if (flow_id_counters != 0) { |
| bool b_duplicate_flow = false; |
| for (int flowid=0; flowid < flow_id_counters; flowid++) { |
| int flow_index = flow_id_data[flowid][0]; |
| b_duplicate_flow = (cfg.data.onu_id == get_flow_status(flow_index, flow_id_data[flowid][1], ONU_ID)) && \ |
| (key.flow_type == flow_id_data[flowid][1]) && \ |
| (cfg.data.svc_port_id == get_flow_status(flow_index, flow_id_data[flowid][1], SVC_PORT_ID)) && \ |
| (cfg.data.priority == get_flow_status(flow_index, flow_id_data[flowid][1], PRIORITY)) && \ |
| (cfg.data.cookie == get_flow_status(flow_index, flow_id_data[flowid][1], COOKIE)) && \ |
| (cfg.data.ingress_intf.intf_type == get_flow_status(flow_index, flow_id_data[flowid][1], INGRESS_INTF_TYPE)) && \ |
| (cfg.data.ingress_intf.intf_id == get_flow_status(flow_index, flow_id_data[flowid][1], INGRESS_INTF_ID)) && \ |
| (cfg.data.egress_intf.intf_type == get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_INTF_TYPE)) && \ |
| (cfg.data.egress_intf.intf_id == get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_INTF_ID)) && \ |
| (c_val.o_vid == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_O_VID)) && \ |
| (c_val.o_pbits == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_O_PBITS)) && \ |
| (c_val.i_vid == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_I_VID)) && \ |
| (c_val.i_pbits == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_I_PBITS)) && \ |
| (c_val.ether_type == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_ETHER_TYPE)) && \ |
| (c_val.ip_proto == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_IP_PROTO)) && \ |
| (c_val.src_port == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_SRC_PORT)) && \ |
| (c_val.dst_port == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_DST_PORT)) && \ |
| (c_val.pkt_tag_type == get_flow_status(flow_index, flow_id_data[flowid][1], CLASSIFIER_PKT_TAG_TYPE)) && \ |
| (cfg.data.egress_qos.type == get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_QOS_TYPE)) && \ |
| (cfg.data.egress_qos.u.fixed_queue.queue_id == get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_QOS_QUEUE_ID)) && \ |
| (cfg.data.egress_qos.tm_sched.id == get_flow_status(flow_index, flow_id_data[flowid][1], EGRESS_QOS_TM_SCHED_ID)) && \ |
| (a_val.cmds_bitmask == get_flow_status(flowid, flow_id_data[flowid][1], ACTION_CMDS_BITMASK)) && \ |
| (a_val.o_vid == get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_O_VID)) && \ |
| (a_val.i_vid == get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_I_VID)) && \ |
| (a_val.o_pbits == get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_O_PBITS)) && \ |
| (a_val.i_pbits == get_flow_status(flow_index, flow_id_data[flowid][1], ACTION_I_PBITS)) && \ |
| (cfg.data.state == get_flow_status(flowid, flow_id_data[flowid][1], STATE)); |
| #ifdef SHOW_FLOW_PARAM |
| // Flow Parameter |
| FLOW_PARAM_LOG(); |
| #endif |
| |
| if (b_duplicate_flow) { |
| FLOW_LOG(WARNING, "Flow duplicate", 0); |
| return bcm_to_grpc_err(BCM_ERR_ALREADY, "flow exists"); |
| } |
| } |
| } |
| #endif |
| |
| bcmos_errno err = bcmolt_cfg_set(dev_id, &cfg.hdr); |
| if (err) { |
| FLOW_LOG(ERROR, "Flow add failed", err); |
| return bcm_to_grpc_err(err, "flow add failed"); |
| } else { |
| FLOW_LOG(INFO, "Flow add ok", err); |
| bcmos_fastlock_lock(&data_lock); |
| flow_id_data[flow_id_counters][0] = key.flow_id; |
| flow_id_data[flow_id_counters][1] = key.flow_type; |
| flow_id_counters += 1; |
| bcmos_fastlock_unlock(&data_lock, 0); |
| } |
| |
| return Status::OK; |
| } |
| |
| Status FlowRemove_(uint32_t flow_id, const std::string flow_type) { |
| |
| bcmolt_flow_cfg cfg; |
| bcmolt_flow_key key = { }; |
| |
| key.flow_id = (bcmolt_flow_id) flow_id; |
| key.flow_id = flow_id; |
| if (flow_type.compare(upstream) == 0 ) { |
| key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM; |
| } else if (flow_type.compare(downstream) == 0) { |
| key.flow_type = BCMOLT_FLOW_TYPE_DOWNSTREAM; |
| } else { |
| OPENOLT_LOG(WARNING, openolt_log_id, "Invalid flow type %s\n", flow_type.c_str()); |
| return bcm_to_grpc_err(BCM_ERR_PARM, "Invalid flow type"); |
| } |
| |
| bcmos_fastlock_lock(&data_lock); |
| uint32_t port_no = flowid_to_port[key.flow_id]; |
| if (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM) { |
| flowid_to_gemport.erase(key.flow_id); |
| port_to_flows[port_no].erase(key.flow_id); |
| if (port_to_flows[port_no].empty()) port_to_flows.erase(port_no); |
| } |
| else |
| { |
| flowid_to_port.erase(key.flow_id); |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| |
| BCMOLT_CFG_INIT(&cfg, flow, key); |
| |
| bcmos_errno err = bcmolt_cfg_clear(dev_id, &cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Error %d while removing flow %d, %s\n", |
| err, flow_id, flow_type.c_str()); |
| return Status(grpc::StatusCode::INTERNAL, "Failed to remove flow"); |
| } |
| |
| bcmos_fastlock_lock(&data_lock); |
| for (int flowid=0; flowid < flow_id_counters; flowid++) { |
| if (flow_id_data[flowid][0] == flow_id && flow_id_data[flowid][1] == key.flow_type) { |
| flow_id_counters -= 1; |
| for (int i=flowid; i < flow_id_counters; i++) { |
| flow_id_data[i][0] = flow_id_data[i + 1][0]; |
| flow_id_data[i][1] = flow_id_data[i + 1][1]; |
| } |
| break; |
| } |
| } |
| bcmos_fastlock_unlock(&data_lock, 0); |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Flow %d, %s removed\n", flow_id, flow_type.c_str()); |
| return Status::OK; |
| } |
| |
| bcmos_errno CreateDefaultSched(uint32_t intf_id, const std::string direction) { |
| bcmos_errno err; |
| bcmolt_tm_sched_cfg tm_sched_cfg; |
| bcmolt_tm_sched_key tm_sched_key = {.id = 1}; |
| tm_sched_key.id = get_default_tm_sched_id(intf_id, direction); |
| |
| //check TM scheduler has configured or not |
| BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key); |
| BCMOLT_MSG_FIELD_GET(&tm_sched_cfg, state); |
| err = bcmolt_cfg_get(dev_id, &tm_sched_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "cfg: Failed to query TM scheduler\n"); |
| return err; |
| } |
| else if (tm_sched_cfg.data.state == BCMOLT_CONFIG_STATE_CONFIGURED) { |
| OPENOLT_LOG(WARNING, openolt_log_id, "tm scheduler default config has already with id %d\n", tm_sched_key.id); |
| return BCM_ERR_OK; |
| } |
| |
| // bcmbal_tm_sched_owner |
| BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key); |
| |
| /**< The output of the tm_sched object instance */ |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.type, BCMOLT_TM_SCHED_OUTPUT_TYPE_INTERFACE); |
| |
| if (direction.compare(upstream) == 0) { |
| // In upstream it is NNI scheduler |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.interface.interface_ref.intf_type, BCMOLT_INTERFACE_TYPE_NNI); |
| } else if (direction.compare(downstream) == 0) { |
| // In downstream it is PON scheduler |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.interface.interface_ref.intf_type, BCMOLT_INTERFACE_TYPE_PON); |
| } |
| |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.interface.interface_ref.intf_id, intf_id); |
| |
| // bcmbal_tm_sched_type |
| // set the deafult policy to strict priority |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, sched_type, BCMOLT_TM_SCHED_TYPE_SP); |
| |
| // num_priorities: Max number of strict priority scheduling elements |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, num_priorities, 8); |
| |
| // bcmbal_tm_shaping |
| uint32_t cir = 1000000; |
| uint32_t pir = 1000000; |
| uint32_t burst = 65536; |
| OPENOLT_LOG(INFO, openolt_log_id, "applying traffic shaping in %s pir=%u, burst=%u\n", |
| direction.c_str(), pir, burst); |
| BCMOLT_FIELD_SET_PRESENT(&tm_sched_cfg.data.rate, tm_shaping, pir); |
| BCMOLT_FIELD_SET_PRESENT(&tm_sched_cfg.data.rate, tm_shaping, burst); |
| // FIXME: Setting CIR, results in BAL throwing error 'tm_sched minimum rate is not supported yet' |
| // BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.cir, cir); |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.pir, pir); |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.burst, burst); |
| |
| err = bcmolt_cfg_set(dev_id, &tm_sched_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create %s scheduler, id %d, intf_id %d, err %d\n", \ |
| direction.c_str(), tm_sched_key.id, intf_id, err); |
| return err; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Create %s scheduler success, id %d, intf_id %d\n", \ |
| direction.c_str(), tm_sched_key.id, intf_id); |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno CreateSched(std::string direction, uint32_t intf_id, uint32_t onu_id, uint32_t uni_id, uint32_t port_no, |
| uint32_t alloc_id, tech_profile::AdditionalBW additional_bw, uint32_t weight, uint32_t priority, |
| tech_profile::SchedulingPolicy sched_policy, tech_profile::TrafficShapingInfo tf_sh_info) { |
| |
| bcmos_errno err; |
| |
| if (direction == downstream) { |
| bcmolt_tm_sched_cfg tm_sched_cfg; |
| bcmolt_tm_sched_key tm_sched_key = {.id = 1}; |
| tm_sched_key.id = get_tm_sched_id(intf_id, onu_id, uni_id, direction); |
| |
| // bcmbal_tm_sched_owner |
| // In downstream it is sub_term scheduler |
| BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key); |
| |
| /**< The output of the tm_sched object instance */ |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.type, BCMOLT_TM_SCHED_OUTPUT_TYPE_TM_SCHED); |
| |
| // bcmbal_tm_sched_parent |
| // The parent for the sub_term scheduler is the PON scheduler in the downstream |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.tm_sched.tm_sched_id, get_default_tm_sched_id(intf_id, direction)); |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.tm_sched.tm_sched_param.u.priority.priority, priority); |
| /* removed by BAL v3.0, N/A - No direct attachment point of type ONU, same functionality may |
| be achieved using the' virtual' type of attachment. |
| tm_sched_owner.u.sub_term.intf_id = intf_id; |
| tm_sched_owner.u.sub_term.sub_term_id = onu_id; |
| */ |
| |
| // bcmbal_tm_sched_type |
| // set the deafult policy to strict priority |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, sched_type, BCMOLT_TM_SCHED_TYPE_SP); |
| |
| // num_priorities: Max number of strict priority scheduling elements |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, num_priorities, 8); |
| |
| // bcmbal_tm_shaping |
| if (tf_sh_info.cir() >= 0 && tf_sh_info.pir() > 0) { |
| uint32_t cir = tf_sh_info.cir(); |
| uint32_t pir = tf_sh_info.pir(); |
| uint32_t burst = tf_sh_info.pbs(); |
| OPENOLT_LOG(INFO, openolt_log_id, "applying traffic shaping in DL cir=%u, pir=%u, burst=%u\n", |
| cir, pir, burst); |
| BCMOLT_FIELD_SET_PRESENT(&tm_sched_cfg.data.rate, tm_shaping, pir); |
| BCMOLT_FIELD_SET_PRESENT(&tm_sched_cfg.data.rate, tm_shaping, burst); |
| // FIXME: Setting CIR, results in BAL throwing error 'tm_sched minimum rate is not supported yet' |
| //BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.cir, cir); |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.pir, pir); |
| BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.burst, burst); |
| } |
| |
| err = bcmolt_cfg_set(dev_id, &tm_sched_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create downstream subscriber scheduler, id %d, \ |
| intf_id %d, onu_id %d, uni_id %d, port_no %u\n", tm_sched_key.id, intf_id, onu_id, \ |
| uni_id, port_no); |
| return err; |
| } |
| OPENOLT_LOG(INFO, openolt_log_id, "Create downstream subscriber sched, id %d, intf_id %d, onu_id %d, \ |
| uni_id %d, port_no %u\n", tm_sched_key.id, intf_id, onu_id, uni_id, port_no); |
| |
| } else { //upstream |
| bcmolt_itupon_alloc_cfg cfg; |
| bcmolt_itupon_alloc_key key = { }; |
| key.pon_ni = intf_id; |
| key.alloc_id = alloc_id; |
| int bw_granularity = (board_technology == "XGS-PON")?XGS_BANDWIDTH_GRANULARITY:GPON_BANDWIDTH_GRANULARITY; |
| int pir_bw = tf_sh_info.pir(); |
| int cir_bw = tf_sh_info.cir(); |
| //offset to match bandwidth granularity |
| int offset_pir_bw = pir_bw%bw_granularity; |
| int offset_cir_bw = cir_bw%bw_granularity; |
| |
| pir_bw = pir_bw - offset_pir_bw; |
| cir_bw = cir_bw - offset_cir_bw; |
| |
| BCMOLT_CFG_INIT(&cfg, itupon_alloc, key); |
| |
| switch (additional_bw) { |
| case 2: //AdditionalBW_BestEffort |
| if (pir_bw == 0) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth was set to 0, must be at least \ |
| %d bytes/sec\n", (board_technology == "XGS-PON")?XGS_BANDWIDTH_GRANULARITY:GPON_BANDWIDTH_GRANULARITY); |
| } else if (pir_bw < cir_bw) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth (%d) can't be less than Guaranteed \ |
| bandwidth (%d)\n", pir_bw, cir_bw); |
| return BCM_ERR_PARM; |
| } else if (pir_bw == cir_bw) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth must be greater than Guaranteed \ |
| bandwidth for additional bandwidth eligibility of type best_effort\n"); |
| return BCM_ERR_PARM; |
| } |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.additional_bw_eligibility, BCMOLT_ADDITIONAL_BW_ELIGIBILITY_BEST_EFFORT); |
| break; |
| case 1: //AdditionalBW_NA |
| if (pir_bw == 0) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth was set to 0, must be at least \ |
| %d bytes/sec\n", (board_technology == "XGS-PON")?XGS_BANDWIDTH_GRANULARITY:GPON_BANDWIDTH_GRANULARITY); |
| return BCM_ERR_PARM; |
| } else if (cir_bw == 0) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Guaranteed bandwidth must be greater than zero for \ |
| additional bandwidth eligibility of type Non-Assured (NA)\n"); |
| return BCM_ERR_PARM; |
| } else if (pir_bw < cir_bw) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth (%d) can't be less than Guaranteed \ |
| bandwidth (%d)\n", pir_bw, cir_bw); |
| return BCM_ERR_PARM; |
| } else if (pir_bw == cir_bw) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth must be greater than Guaranteed \ |
| bandwidth for additional bandwidth eligibility of type non_assured\n"); |
| return BCM_ERR_PARM; |
| } |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.additional_bw_eligibility, BCMOLT_ADDITIONAL_BW_ELIGIBILITY_NON_ASSURED); |
| break; |
| case 0: //AdditionalBW_None |
| if (pir_bw == 0) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth was set to 0, must be at least \ |
| 16000 bytes/sec\n"); |
| return BCM_ERR_PARM; |
| } else if (cir_bw == 0) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth must be equal to Guaranteed bandwidth \ |
| for additional bandwidth eligibility of type None\n"); |
| return BCM_ERR_PARM; |
| } else if (pir_bw > cir_bw) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth must be equal to Guaranteed bandwidth \ |
| for additional bandwidth eligibility of type None\n"); |
| OPENOLT_LOG(ERROR, openolt_log_id, "set Maximum bandwidth (%d) to Guaranteed \ |
| bandwidth in None eligibility\n", pir_bw); |
| cir_bw = pir_bw; |
| } else if (pir_bw < cir_bw) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth (%d) can't be less than Guaranteed \ |
| bandwidth (%d)\n", pir_bw, cir_bw); |
| OPENOLT_LOG(ERROR, openolt_log_id, "set Maximum bandwidth (%d) to Guaranteed \ |
| bandwidth in None eligibility\n", pir_bw); |
| cir_bw = pir_bw; |
| } |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.additional_bw_eligibility, BCMOLT_ADDITIONAL_BW_ELIGIBILITY_NONE); |
| break; |
| default: |
| return BCM_ERR_PARM; |
| } |
| /* CBR Real Time Bandwidth which require shaping of the bandwidth allocations |
| in a fine granularity. */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_rt_bw, 0); |
| /* Fixed Bandwidth with no critical requirement of shaping */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_nrt_bw, 0); |
| /* Dynamic bandwidth which the OLT is committed to allocate upon demand */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.guaranteed_bw, cir_bw); |
| /* Maximum allocated bandwidth allowed for this alloc ID */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.maximum_bw, pir_bw); |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.alloc_type, BCMOLT_ALLOC_TYPE_NSR); |
| /* Set to True for AllocID with CBR RT Bandwidth that requires compensation |
| for skipped allocations during quiet window */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_rt_compensation, BCMOS_FALSE); |
| /**< Allocation Profile index for CBR non-RT Bandwidth */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_nrt_ap_index, 0); |
| /**< Allocation Profile index for CBR RT Bandwidth */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_rt_ap_index, 0); |
| /**< Alloc ID Weight used in case of Extended DBA mode */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.weight, 0); |
| /**< Alloc ID Priority used in case of Extended DBA mode */ |
| BCMOLT_MSG_FIELD_SET(&cfg, sla.priority, 0); |
| BCMOLT_MSG_FIELD_SET(&cfg, onu_id, onu_id); |
| |
| err = bcmolt_cfg_set(dev_id, &cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create upstream bandwidth allocation, intf_id %d, onu_id %d, uni_id %d,\ |
| port_no %u, alloc_id %d, err %d\n", intf_id, onu_id,uni_id,port_no,alloc_id, err); |
| return err; |
| } |
| OPENOLT_LOG(INFO, openolt_log_id, "Create upstream bandwidth allocation, intf_id %d, onu_id %d, uni_id %d, port_no %u, \ |
| alloc_id %d\n", intf_id,onu_id,uni_id,port_no,alloc_id); |
| } |
| |
| return BCM_ERR_OK; |
| } |
| |
| Status CreateTrafficSchedulers_(const tech_profile::TrafficSchedulers *traffic_scheds) { |
| uint32_t intf_id = traffic_scheds->intf_id(); |
| uint32_t onu_id = traffic_scheds->onu_id(); |
| uint32_t uni_id = traffic_scheds->uni_id(); |
| uint32_t port_no = traffic_scheds->port_no(); |
| std::string direction; |
| unsigned int alloc_id; |
| tech_profile::SchedulerConfig sched_config; |
| tech_profile::AdditionalBW additional_bw; |
| uint32_t priority; |
| uint32_t weight; |
| tech_profile::SchedulingPolicy sched_policy; |
| tech_profile::TrafficShapingInfo traffic_shaping_info; |
| bcmos_errno err; |
| |
| for (int i = 0; i < traffic_scheds->traffic_scheds_size(); i++) { |
| tech_profile::TrafficScheduler traffic_sched = traffic_scheds->traffic_scheds(i); |
| |
| direction = GetDirection(traffic_sched.direction()); |
| if (direction.compare("direction-not-supported") == 0) |
| return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
| |
| alloc_id = traffic_sched.alloc_id(); |
| sched_config = traffic_sched.scheduler(); |
| additional_bw = sched_config.additional_bw(); |
| priority = sched_config.priority(); |
| weight = sched_config.weight(); |
| sched_policy = sched_config.sched_policy(); |
| traffic_shaping_info = traffic_sched.traffic_shaping_info(); |
| err = CreateSched(direction, intf_id, onu_id, uni_id, port_no, alloc_id, additional_bw, weight, priority, |
| sched_policy, traffic_shaping_info); |
| if (err) { |
| return bcm_to_grpc_err(err, "Failed to create scheduler"); |
| } |
| } |
| return Status::OK; |
| } |
| |
| bcmos_errno RemoveSched(int intf_id, int onu_id, int uni_id, int alloc_id, std::string direction) { |
| |
| bcmos_errno err; |
| |
| if (direction == upstream) { |
| bcmolt_itupon_alloc_cfg cfg; |
| bcmolt_itupon_alloc_key key = { }; |
| key.pon_ni = intf_id; |
| key.alloc_id = alloc_id; |
| |
| BCMOLT_CFG_INIT(&cfg, itupon_alloc, key); |
| err = bcmolt_cfg_clear(dev_id, &cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove scheduler sched, direction = %s, intf_id %d, alloc_id %d, err %d\n", \ |
| direction.c_str(), intf_id, alloc_id, err); |
| return err; |
| } |
| OPENOLT_LOG(INFO, openolt_log_id, "Removed sched, direction = %s, intf_id %d, alloc_id %d\n", \ |
| direction.c_str(), intf_id, alloc_id); |
| } else if (direction == downstream) { |
| bcmolt_tm_sched_cfg cfg; |
| bcmolt_tm_sched_key key = { }; |
| |
| if (is_tm_sched_id_present(intf_id, onu_id, uni_id, direction)) { |
| key.id = get_tm_sched_id(intf_id, onu_id, uni_id, direction); |
| } else { |
| OPENOLT_LOG(INFO, openolt_log_id, "schduler not present in %s, err %d\n", direction.c_str(), err); |
| return BCM_ERR_OK; |
| } |
| BCMOLT_CFG_INIT(&cfg, tm_sched, key); |
| err = bcmolt_cfg_clear(dev_id, &(cfg.hdr)); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove scheduler, direction = %s, id %d, intf_id %d, onu_id %d\n", \ |
| direction.c_str(), key.id, intf_id, onu_id); |
| return err; |
| } |
| OPENOLT_LOG(INFO, openolt_log_id, "Removed sched, direction = %s, id %d, intf_id %d, onu_id %d\n", \ |
| direction.c_str(), key.id, intf_id, onu_id); |
| } |
| |
| free_tm_sched_id(intf_id, onu_id, uni_id, direction); |
| return BCM_ERR_OK; |
| } |
| |
| Status RemoveTrafficSchedulers_(const tech_profile::TrafficSchedulers *traffic_scheds) { |
| uint32_t intf_id = traffic_scheds->intf_id(); |
| uint32_t onu_id = traffic_scheds->onu_id(); |
| uint32_t uni_id = traffic_scheds->uni_id(); |
| std::string direction; |
| bcmos_errno err; |
| |
| for (int i = 0; i < traffic_scheds->traffic_scheds_size(); i++) { |
| tech_profile::TrafficScheduler traffic_sched = traffic_scheds->traffic_scheds(i); |
| |
| direction = GetDirection(traffic_sched.direction()); |
| if (direction.compare("direction-not-supported") == 0) |
| return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
| |
| int alloc_id = traffic_sched.alloc_id(); |
| err = RemoveSched(intf_id, onu_id, uni_id, alloc_id, direction); |
| if (err) { |
| return bcm_to_grpc_err(err, "error-removing-traffic-scheduler"); |
| } |
| } |
| return Status::OK; |
| } |
| |
| bcmos_errno CreateTrafficQueueMappingProfile(uint32_t sched_id, uint32_t intf_id, uint32_t onu_id, uint32_t uni_id, \ |
| std::string direction, std::vector<uint32_t> tmq_map_profile) { |
| bcmos_errno err; |
| bcmolt_tm_qmp_cfg tm_qmp_cfg; |
| bcmolt_tm_qmp_key tm_qmp_key; |
| bcmolt_arr_u8_8 pbits_to_tmq_id = {0}; |
| |
| int tm_qmp_id = get_tm_qmp_id(sched_id, intf_id, onu_id, uni_id, tmq_map_profile); |
| if (tm_qmp_id == -1) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create tm queue mapping profile. Max allowed profile count is 16.\n"); |
| } |
| |
| tm_qmp_key.id = tm_qmp_id; |
| for (uint32_t priority=0; priority<tmq_map_profile.size(); priority++) { |
| pbits_to_tmq_id.arr[priority] = tmq_map_profile[priority]; |
| } |
| |
| BCMOLT_CFG_INIT(&tm_qmp_cfg, tm_qmp, tm_qmp_key); |
| BCMOLT_MSG_FIELD_SET(&tm_qmp_cfg, type, BCMOLT_TM_QMP_TYPE_PBITS); |
| BCMOLT_MSG_FIELD_SET(&tm_qmp_cfg, pbits_to_tmq_id, pbits_to_tmq_id); |
| BCMOLT_MSG_FIELD_SET(&tm_qmp_cfg, ref_count, 0); |
| BCMOLT_MSG_FIELD_SET(&tm_qmp_cfg, state, BCMOLT_CONFIG_STATE_CONFIGURED); |
| |
| err = bcmolt_cfg_set(dev_id, &tm_qmp_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create tm queue mapping profile, id %d\n", \ |
| tm_qmp_key.id); |
| return err; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Create tm queue mapping profile success, id %d\n", \ |
| tm_qmp_key.id); |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno RemoveTrafficQueueMappingProfile(uint32_t tm_qmp_id) { |
| bcmos_errno err; |
| bcmolt_tm_qmp_cfg tm_qmp_cfg; |
| bcmolt_tm_qmp_key tm_qmp_key; |
| tm_qmp_key.id = tm_qmp_id; |
| |
| BCMOLT_CFG_INIT(&tm_qmp_cfg, tm_qmp, tm_qmp_key); |
| err = bcmolt_cfg_clear(dev_id, &tm_qmp_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove tm queue mapping profile, id %d\n", \ |
| tm_qmp_key.id); |
| return err; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Remove tm queue mapping profile success, id %d\n", \ |
| tm_qmp_key.id); |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno CreateDefaultQueue(uint32_t intf_id, const std::string direction) { |
| bcmos_errno err; |
| |
| /* Create 4 Queues on given PON/NNI scheduler */ |
| for (int queue_id = 0; queue_id < 4; queue_id++) { |
| bcmolt_tm_queue_cfg tm_queue_cfg; |
| bcmolt_tm_queue_key tm_queue_key = {}; |
| tm_queue_key.sched_id = get_default_tm_sched_id(intf_id, direction); |
| tm_queue_key.id = queue_id; |
| if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) |
| tm_queue_key.tm_q_set_id = BCMOLT_TM_QUEUE_SET_ID_QSET_NOT_USE; |
| else |
| tm_queue_key.tm_q_set_id = BCMOLT_TM_QUEUE_KEY_TM_Q_SET_ID_DEFAULT; |
| |
| BCMOLT_CFG_INIT(&tm_queue_cfg, tm_queue, tm_queue_key); |
| BCMOLT_MSG_FIELD_SET(&tm_queue_cfg, tm_sched_param.type, BCMOLT_TM_SCHED_PARAM_TYPE_PRIORITY); |
| BCMOLT_MSG_FIELD_SET(&tm_queue_cfg, tm_sched_param.u.priority.priority, queue_id); |
| |
| err = bcmolt_cfg_set(dev_id, &tm_queue_cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create %s tm queue, id %d, sched_id %d, tm_q_set_id %d\n", \ |
| direction.c_str(), tm_queue_key.id, tm_queue_key.sched_id, tm_queue_key.tm_q_set_id); |
| return err; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Create %s tm_queue success, id %d, sched_id %d, tm_q_set_id %d\n", \ |
| direction.c_str(), tm_queue_key.id, tm_queue_key.sched_id, tm_queue_key.tm_q_set_id); |
| } |
| return BCM_ERR_OK; |
| } |
| |
| bcmos_errno CreateQueue(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, uint32_t priority, |
| uint32_t gemport_id) { |
| bcmos_errno err; |
| bcmolt_tm_queue_cfg cfg; |
| bcmolt_tm_queue_key key = { }; |
| OPENOLT_LOG(INFO, openolt_log_id, "creating %s queue. access_intf_id = %d, onu_id = %d, uni_id = %d \ |
| gemport_id = %d\n", direction.c_str(), access_intf_id, onu_id, uni_id, gemport_id); |
| |
| key.sched_id = (direction.compare(upstream) == 0) ? get_default_tm_sched_id(nni_intf_id, direction) : \ |
| get_tm_sched_id(access_intf_id, onu_id, uni_id, direction); |
| |
| if (priority > 7) { |
| return BCM_ERR_RANGE; |
| } |
| |
| /* FIXME: The upstream queues have to be created once only. |
| The upstream queues on the NNI scheduler are shared by all subscribers. |
| When the first scheduler comes in, the queues get created, and are re-used by all others. |
| Also, these queues should be present until the last subscriber exits the system. |
| One solution is to have these queues always, i.e., create it as soon as OLT is enabled. |
| |
| There is one queue per gem port and Queue ID is fetched based on priority_q configuration |
| for each GEM in TECH PROFILE */ |
| key.id = queue_id_list[priority]; |
| |
| if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) { |
| // Reset the Queue ID to 0, if it is fixed queue, i.e., there is only one queue for subscriber. |
| key.id = 0; |
| key.tm_q_set_id = BCMOLT_TM_QUEUE_SET_ID_QSET_NOT_USE; |
| } |
| else if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| key.tm_q_set_id = get_tm_qmp_id(key.sched_id, access_intf_id, onu_id, uni_id); |
| } |
| else { |
| key.tm_q_set_id = BCMOLT_TM_QUEUE_KEY_TM_Q_SET_ID_DEFAULT; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "queue assigned queue_id = %d\n", key.id); |
| |
| BCMOLT_CFG_INIT(&cfg, tm_queue, key); |
| BCMOLT_MSG_FIELD_SET(&cfg, tm_sched_param.u.priority.priority, priority); |
| |
| err = bcmolt_cfg_set(dev_id, &cfg.hdr); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create subscriber tm queue, direction = %s, id %d, \ |
| sched_id %d, tm_q_set_id %d, intf_id %d, onu_id %d, uni_id %d, err %d\n", \ |
| direction.c_str(), key.id, key.sched_id, key.tm_q_set_id, access_intf_id, onu_id, uni_id, err); |
| return err; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Created tm_queue, direction %s, id %d, sched_id %d, tm_q_set_id %d, \ |
| intf_id %d, onu_id %d, uni_id %d\n", direction.c_str(), key.id, key.sched_id, key.tm_q_set_id, access_intf_id, onu_id, uni_id); |
| return BCM_ERR_OK; |
| } |
| |
| Status CreateTrafficQueues_(const tech_profile::TrafficQueues *traffic_queues) { |
| uint32_t intf_id = traffic_queues->intf_id(); |
| uint32_t onu_id = traffic_queues->onu_id(); |
| uint32_t uni_id = traffic_queues->uni_id(); |
| uint32_t sched_id; |
| std::string direction; |
| bcmos_errno err; |
| |
| qos_type = (traffic_queues->traffic_queues_size() > 1) ? \ |
| BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE : BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE; |
| |
| if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| uint32_t queues_priority_q[traffic_queues->traffic_queues_size()] = {0}; |
| std::string queues_pbit_map[traffic_queues->traffic_queues_size()]; |
| for (int i = 0; i < traffic_queues->traffic_queues_size(); i++) { |
| tech_profile::TrafficQueue traffic_queue = traffic_queues->traffic_queues(i); |
| |
| direction = GetDirection(traffic_queue.direction()); |
| if (direction.compare("direction-not-supported") == 0) |
| return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
| |
| queues_priority_q[i] = traffic_queue.priority(); |
| queues_pbit_map[i] = traffic_queue.pbit_map(); |
| } |
| |
| std::vector<uint32_t> tmq_map_profile(8, 0); |
| tmq_map_profile = get_tmq_map_profile(get_valid_queues_pbit_map(queues_pbit_map, COUNT_OF(queues_pbit_map)), \ |
| queues_priority_q, COUNT_OF(queues_priority_q)); |
| sched_id = (direction.compare(upstream) == 0) ? get_default_tm_sched_id(nni_intf_id, direction) : \ |
| get_tm_sched_id(intf_id, onu_id, uni_id, direction); |
| |
| int tm_qmp_id = get_tm_qmp_id(tmq_map_profile); |
| if (tm_qmp_id == -1) { |
| CreateTrafficQueueMappingProfile(sched_id, intf_id, onu_id, uni_id, direction, tmq_map_profile); |
| } else if (tm_qmp_id != -1 && get_tm_qmp_id(sched_id, intf_id, onu_id, uni_id) == -1) { |
| OPENOLT_LOG(INFO, openolt_log_id, "tm queue mapping profile present already with id %d\n", tm_qmp_id); |
| update_sched_qmp_id_map(sched_id, intf_id, onu_id, uni_id, tm_qmp_id); |
| } |
| } |
| |
| for (int i = 0; i < traffic_queues->traffic_queues_size(); i++) { |
| tech_profile::TrafficQueue traffic_queue = traffic_queues->traffic_queues(i); |
| |
| direction = GetDirection(traffic_queue.direction()); |
| if (direction.compare("direction-not-supported") == 0) |
| return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
| |
| err = CreateQueue(direction, intf_id, onu_id, uni_id, traffic_queue.priority(), traffic_queue.gemport_id()); |
| |
| // If the queue exists already, lets not return failure and break the loop. |
| if (err && err != BCM_ERR_ALREADY) { |
| return bcm_to_grpc_err(err, "Failed to create queue"); |
| } |
| } |
| return Status::OK; |
| } |
| |
| bcmos_errno RemoveQueue(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, uint32_t priority, |
| uint32_t gemport_id) { |
| bcmolt_tm_queue_cfg cfg; |
| bcmolt_tm_queue_key key = { }; |
| bcmos_errno err; |
| |
| if (direction == downstream) { |
| if (is_tm_sched_id_present(access_intf_id, onu_id, uni_id, direction)) { |
| key.sched_id = get_tm_sched_id(access_intf_id, onu_id, uni_id, direction); |
| key.id = queue_id_list[priority]; |
| } else { |
| OPENOLT_LOG(INFO, openolt_log_id, "queue not present in DS. Not clearing, access_intf_id %d, onu_id %d, uni_id %d, gemport_id %d, direction %s\n", access_intf_id, onu_id, uni_id, gemport_id, direction.c_str()); |
| return BCM_ERR_OK; |
| } |
| } else { |
| /* In the upstream we use pre-created queues on the NNI scheduler that are used by all subscribers. |
| They should not be removed. So, lets return OK. */ |
| return BCM_ERR_OK; |
| } |
| |
| if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) { |
| key.tm_q_set_id = BCMOLT_TM_QUEUE_SET_ID_QSET_NOT_USE; |
| // Reset the queue id to 0 when using fixed queue. |
| key.id = 0; |
| } |
| else if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| key.tm_q_set_id = get_tm_qmp_id(key.sched_id, access_intf_id, onu_id, uni_id); |
| } |
| else { |
| key.tm_q_set_id = BCMOLT_TM_QUEUE_KEY_TM_Q_SET_ID_DEFAULT; |
| } |
| |
| BCMOLT_CFG_INIT(&cfg, tm_queue, key); |
| err = bcmolt_cfg_clear(dev_id, &(cfg.hdr)); |
| if (err) { |
| OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove queue, direction = %s, id %d, sched_id %d, \ |
| tm_q_set_id %d, intf_id %d, onu_id %d, uni_id %d\n", |
| direction.c_str(), key.id, key.sched_id, key.tm_q_set_id, access_intf_id, onu_id, uni_id); |
| return err; |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "Removed tm_queue, direction %s, id %d, sched_id %d, tm_q_set_id %d, \ |
| intf_id %d, onu_id %d, uni_id %d\n", direction.c_str(), key.id, key.sched_id, key.tm_q_set_id, access_intf_id, onu_id, uni_id); |
| |
| return BCM_ERR_OK; |
| } |
| |
| Status RemoveTrafficQueues_(const tech_profile::TrafficQueues *traffic_queues) { |
| uint32_t intf_id = traffic_queues->intf_id(); |
| uint32_t onu_id = traffic_queues->onu_id(); |
| uint32_t uni_id = traffic_queues->uni_id(); |
| uint32_t port_no = traffic_queues->port_no(); |
| uint32_t sched_id; |
| std::string direction; |
| bcmos_errno err; |
| |
| qos_type = (traffic_queues->traffic_queues_size() > 1) ? \ |
| BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE : BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE; |
| |
| for (int i = 0; i < traffic_queues->traffic_queues_size(); i++) { |
| tech_profile::TrafficQueue traffic_queue = traffic_queues->traffic_queues(i); |
| |
| direction = GetDirection(traffic_queue.direction()); |
| if (direction.compare("direction-not-supported") == 0) |
| return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
| |
| err = RemoveQueue(direction, intf_id, onu_id, uni_id, traffic_queue.priority(), traffic_queue.gemport_id()); |
| if (err) { |
| return bcm_to_grpc_err(err, "Failed to remove queue"); |
| } |
| } |
| |
| if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE && (direction.compare(upstream) == 0 || direction.compare(downstream) == 0 && is_tm_sched_id_present(intf_id, onu_id, uni_id, direction))) { |
| sched_id = (direction.compare(upstream) == 0) ? get_default_tm_sched_id(nni_intf_id, direction) : \ |
| get_tm_sched_id(intf_id, onu_id, uni_id, direction); |
| |
| int tm_qmp_id = get_tm_qmp_id(sched_id, intf_id, onu_id, uni_id); |
| if (free_tm_qmp_id(sched_id, intf_id, onu_id, uni_id, tm_qmp_id)) { |
| RemoveTrafficQueueMappingProfile(tm_qmp_id); |
| } |
| } |
| return Status::OK; |
| } |
| |
| Status check_connection() { |
| int maxTrials = 60; |
| while (!bcmolt_api_conn_mgr_is_connected(dev_id)) { |
| sleep(1); |
| if (--maxTrials == 0) |
| return grpc::Status(grpc::StatusCode::UNAVAILABLE, "check connection failed"); |
| else |
| OPENOLT_LOG(INFO, openolt_log_id, "waiting for daemon connection ...\n"); |
| } |
| OPENOLT_LOG(INFO, openolt_log_id, "daemon is connected\n"); |
| return Status::OK; |
| } |
| |
| Status check_bal_ready() { |
| bcmos_errno err; |
| int maxTrials = 30; |
| bcmolt_olt_cfg olt_cfg = { }; |
| bcmolt_olt_key olt_key = { }; |
| |
| BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key); |
| BCMOLT_MSG_FIELD_GET(&olt_cfg, bal_state); |
| |
| while (olt_cfg.data.bal_state != BCMOLT_BAL_STATE_BAL_AND_SWITCH_READY) { |
| if (--maxTrials == 0) |
| return grpc::Status(grpc::StatusCode::UNAVAILABLE, "check bal ready failed"); |
| sleep(5); |
| #ifdef TEST_MODE |
| // It is impossible to mock the setting of olt_cfg.data.bal_state because |
| // the actual bcmolt_cfg_get passes the address of olt_cfg.hdr and we cannot |
| // set the olt_cfg.data.bal_state. So a new stub function is created and address |
| // of olt_cfg is passed. This is one-of case where we need to add specific |
| // code in product code. |
| if (bcmolt_cfg_get_stub(dev_id, &olt_cfg)) { |
| #else |
| if (bcmolt_cfg_get(dev_id, &olt_cfg.hdr)) { |
| #endif |
| continue; |
| } |
| else |
| OPENOLT_LOG(INFO, openolt_log_id, "waiting for BAL ready ...\n"); |
| } |
| |
| OPENOLT_LOG(INFO, openolt_log_id, "BAL is ready\n"); |
| return Status::OK; |
| } |