blob: 89967fe2ca4cf604ac2586c3ffe4e674dc775a7e [file] [log] [blame]
#Copyright 2018-present Open Networking Foundation
#
#Licensed under the Apache License, Version 2.0 (the "License");
#you may not use this file except in compliance with the License.
#You may obtain a copy of the License at
#
#http://www.apache.org/licenses/LICENSE-2.0
#
#Unless required by applicable law or agreed to in writing, software
#distributed under the License is distributed on an "AS IS" BASIS,
#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#See the License for the specific language governing permissions and
#limitations under the License.
########################################################################
##
##
## Config
##
##
TOP_DIR=$(shell pwd)
OPENOLTDEVICE ?= generic
#
# Three vendor proprietary source files are required to build BAL.
# SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK.
# sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK.
# ACCTON_BAL_<BAL_VER>-<DEV_VER>.patch - Accton/Edgecore's patch.
BAL_MAJOR_VER = 3
BAL_MINOR_VER = 10
BAL_REV_HOST_VER = 2
BAL_REV_EMBEDDED_VER = 2
BAL_API_SO_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_HOST_VER)
BAL_VER = $(BAL_API_SO_VER).$(BAL_REV_EMBEDDED_VER)
ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
DEV_VER = 20211129
# Version of Open Network Linux (ONL).
ONL_KERN_VER_MAJOR = 4.19
else ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
BAL_VER = 3.10.0.0
DEV_VER = 20220425
else
DEV_VER = 202111040101
API_VER = 202111090101
# Version of Open Network Linux (ONL).
ONL_KERN_VER_MAJOR = 4.14
endif
SDK_VER = 6.5.21
# OpenOLT Proto version.
# This specifies the GIT tag in https://github.com/opencord/voltha-protos
# repo that we need to refer to, to pick the right version of
# openolt.proto and tech_profile.proto
OPENOLT_PROTO_VER ?= v5.2.1
# Variables used for Inband build
INBAND = "n"
VLAN_ID = 4093
# NNI ports speed setting
PORT_100G_SPEED ?= 100000
PORT_25G_SPEED ?= 25000
ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w"))
PORT_QSFP_SPEED ?= 40g
PORT_SFP_SPEED ?= 10g
else ifeq ("$(strip $(OPENOLTDEVICE))","rlt-1600x-w")
PORT_QSFP_SPEED ?= 100g
PORT_SFP_SPEED ?= 25g
endif
# Build directory
BUILD_DIR = build
# Rx optical power test app
RXTX_POWER_EXE = read_rxtx_power
# initialiaze path of protoc binary
protoc-bin = $(shell which protoc)
# initialiaze path of grpc_cpp_plugin binary
grpc-cpp-plugin-bin = $(shell which grpc_cpp_plugin)
USER := $(shell echo $(USER))
#
########################################################################
##
##
## Initialize various build flags
##
##
HOST_SYSTEM = $(shell uname | cut -f 1 -d_)
SYSTEM ?= $(HOST_SYSTEM)
VERSION ?= $(shell cat ../VERSION)
#set ref and commit date only if committed
LABEL_VCS_URL ?= $(shell git remote get-url $(shell git remote))
LABEL_VCS_REF = $(shell git rev-parse HEAD)
LABEL_BUILD_DATE ?= $(shell date -u "+%Y-%m-%dT%H:%M:%SZ")
LABEL_COMMIT_DATE = $(shell git show -s --format=%cd --date=iso-strict HEAD)
LIBGRPC_PATH=$(shell pkg-config --libs-only-L grpc | sed s/-L// | sed s/\ //g)
LIBZ_PATH=$(shell pkg-config --libs-only-L zlib | sed s/-L// | sed s/\ //g)
LIBPROTOBUF_PATH=$(shell PKG_CONFIG_ALLOW_SYSTEM_LIBS=true pkg-config --libs-only-L protobuf | sed s/-L// | sed s/\ //g)
PCAPPLUSPLUS_INCLUDE_PATH=-I/usr/local/include/pcapplusplus/
PCAPPLUSPLUS_LIB_PATH=-lPcap++ -lPacket++ -lCommon++
ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
CXX = @CXX@-6
else
CXX = @CXX@-4.9
endif
CXXFLAGS += @CXXFLAGS@
CXXFLAGS += $(shell pkg-config --cflags-only-I grpc++)
CXXFLAGS += $(PCAPPLUSPLUS_INCLUDE_PATH)
CPPFLAGS += @CPPFLAGS@
CPPFLAGS += `pkg-config --cflags protobuf grpc`
# Enabling SCALE_AND_PERF for higher performance and scaling to 512 subscribers. Enabling the flag will
# disable the handling in FLOW_CHECKER and also disable flow statistics
CPPFLAGS += -DVERSION=\"$(VERSION)\" -DBAL_VER=\"$(BAL_VER)\" -DLABEL_VCS_URL=\"$(LABEL_VCS_URL)\" \
-DLABEL_VCS_REF=\"$(LABEL_VCS_REF)\" -DLABEL_BUILD_DATE=\"$(LABEL_BUILD_DATE)\" \
-DLABEL_COMMIT_DATE=\"$(LABEL_COMMIT_DATE)\" -DFLOW_CHECKER -USCALE_AND_PERF
CPPFLAGS += -I./
CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix
LDFLAGS += @LDFLAGS@
LDFLAGS += `pkg-config --libs protobuf grpc++ grpc` -ldl -lgpr
CXXFLAGSDEVICE = -I./device -I./device/$(OPENOLTDEVICE) -I./device/generic
export CXX CXXFLAGS OPENOLT_PROTO_VER
########################################################################
##
##
## ONL
##
##
ONL_REPO = onl
ONL_DIR = $(BUILD_DIR)/$(ONL_REPO)
ONL_COMMIT_ID = 11ed2140
onl:
if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \
mkdir -p $(ONL_DIR); \
git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux; \
if [ "$(OPENOLTDEVICE)" = "sda3016ss" ]; then \
tar zxvf download/onl_zyxel_sda3016ss.tar.gz -C $(ONL_DIR)/OpenNetworkLinux; \
cp download/onl_workaround.patch $(ONL_DIR)/OpenNetworkLinux; \
cd $(ONL_DIR)/OpenNetworkLinux; \
git checkout $(ONL_COMMIT_ID); \
git apply --whitespace=nowarn onl_zyxel_sda3016ss.patch; \
git apply --whitespace=nowarn onl_workaround.patch; \
export VERSION=8; \
make docker; \
cd packages/base/amd64/kernels/kernel-4.19-lts-x86-64-all/builds/jessie; tar zcf linux-4.19.81.tgz linux-4.19.81; \
mv $(BUILD_DIR)/$(ONL_REPO)/OpenNetworkLinux/packages/base/amd64/kernels/kernel-4.19-lts-x86-64-all/builds/jessie/linux-4.19.81.tgz download/; \
else \
cp download/Makefile.onl $(ONL_DIR)/Makefile; \
install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux; \
cp download/disable-certificate-validation*.patch $(ONL_DIR)/OpenNetworkLinux; \
if [ "$(OPENOLTDEVICE)" = "rlt-3200g-w" ] || [ "$(OPENOLTDEVICE)" = "rlt-1600g-w" ] || [ "$(OPENOLTDEVICE)" = "rlt-1600x-w" ]; \
then \
cp $(TOP_DIR)/device/$(OPENOLTDEVICE)/update_kernel_options.sh $(ONL_DIR)/OpenNetworkLinux/.; \
chmod 0755 $(ONL_DIR)/OpenNetworkLinux/update_kernel_options.sh; \
fi; \
make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n BOARD=$(OPENOLTDEVICE); \
fi; \
else \
if [ "$(INBAND)" = n -a "$$(grep "inband" $(ONL_DIR)/onl_build.mode | cut -d= -f 2)" = y ]; then \
make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n; \
fi; \
fi;
onl-force:
make -C $(ONL_DIR) $(OPENOLTDEVICE)-$(ONL_KERN_VER_MAJOR)
distclean-onl:
sudo rm -rf $(ONL_DIR)
########################################################################
##
##
## Broadcom LIBRARY OSS API
##
##
BAL_API_DIR = $(TOP_DIR)/$(BUILD_DIR)/bal-oss-api-$(BAL_VER)
BAL_API_PATCH = ACCTON_BAL_API_$(BAL_VER)-V$(API_VER).patch
$(BUILD_DIR)/libbal_host_api-oss.so:
if [ ! -d "$(BAL_API_DIR)" ]; then \
mkdir -p $(BAL_API_DIR); \
cd $(BAL_API_DIR); \
git clone https://github.com/balapi/bal-sdk.git -b $(BAL_VER); \
mv bal-sdk bal-sdk-$(BAL_VER); \
if [ "$(OPENOLTDEVICE)" = "rlt-3200g-w" ] || [ "$(OPENOLTDEVICE)" = "rlt-1600g-w" ] || [ "$(OPENOLTDEVICE)" = "rlt-1600x-w" ]; \
then \
cd $(BAL_API_DIR)/bal-sdk-$(BAL_VER); \
make; \
cp build/fs/libbal_host_api-oss.$(BAL_API_SO_VER).so ../../../$(BUILD_DIR)/libbal_host_api-oss.so; \
cd .. && ln -s bal-sdk-$(BAL_VER)/build/fs/include include; \
cd; \
else \
cat $(TOP_DIR)/download/$(BAL_API_PATCH) | patch -p1 -d $(BAL_API_DIR)/bal-sdk-$(BAL_VER); \
cd $(BAL_API_DIR)/bal-sdk-$(BAL_VER); \
make BOARD=$(OPENOLTDEVICE); \
cp build/fs/libbal_host_api-oss.$(BAL_API_SO_VER).so ../../../$(BUILD_DIR)/libbal_host_api-oss.so; \
cp config/$(OPENOLTDEVICE)/bcm_config.h build/fs/include; \
cd .. && ln -s bal-sdk-$(BAL_VER)/build/fs/include include; \
cd; \
fi; \
else \
cd $(BAL_API_DIR)/bal-sdk-$(BAL_VER); \
cp build/fs/libbal_host_api-oss.$(BAL_API_SO_VER).so ../../../$(BUILD_DIR)/libbal_host_api-oss.so; \
if [ "$(OPENOLTDEVICE)" != "rlt-3200g-w" ] && [ "$(OPENOLTDEVICE)" != "rlt-1600g-w" ] && [ "$(OPENOLTDEVICE)" != "rlt-1600x-w" ]; \
then \
cp config/$(OPENOLTDEVICE)/bcm_config.h build/fs/include; \
fi; \
cd .. && ln -s bal-sdk-$(BAL_VER)/build/fs/include include; \
cd; \
fi;
bal-api-clean:
if [ -d "$(BAL_API_DIR)" ]; then \
rm -rf $(BAL_API_DIR); \
fi;
rm -rf $(BUILD_DIR)/libbal_host_api-oss.so
########################################################################
#
# Choose api type: open api (api-oss) or proprietary api (api-nda-req)
BAL_API_TYPE = api-oss
#BAL_API_TYPE = api-nda_req
########################################################################
##
##
## BAL OSS API
##
##
BAL_DIR = $(BUILD_DIR)/$(OPENOLTDEVICE)-bal
BALLIBDIR = $(BUILD_DIR)
BALLIBNAME = bal_host_$(BAL_API_TYPE)
BAL_INC = -I$(BAL_API_DIR)/include
ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
BALLIBDIR = $(BAL_DIR)/build/host_reference/host_api
BAL_INC += -I$(BAL_DIR)/host_driver/bal/bal_include \
-I$(BAL_DIR)/host_driver/topology \
-I$(BAL_DIR)/host_driver/utils \
-I$(BAL_DIR)/host_driver/api \
-I$(BAL_DIR)/host_driver/metadata \
-I$(BAL_DIR)/host_customized/os_abstraction \
-I$(BAL_DIR)/host_customized/os_abstraction/posix \
-I$(BAL_DIR)/host_customized/config \
-I$(BAL_DIR)/host_driver/api_conn_mgr \
-I$(BAL_DIR)/host_driver/conn_mgr \
-I$(BAL_DIR)/host_driver/api/host/topology \
-I$(BAL_DIR)/host_driver/system_types \
-I$(BAL_DIR)/host_driver/transport \
-I$(BAL_DIR)/host_reference/cli \
-I$(BAL_DIR)/host_reference/api_cli \
-I$(BAL_DIR)/host_reference/dev_log \
-I$(BAL_DIR)/host_reference/host_api \
-I$(BAL_DIR)/lib/cmdline
endif
CXXFLAGS += $(BAL_INC)
CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST -DENABLE_LOG -DENABLE_CLI
PORT_SPEED_FILE = $(BAL_DIR)/switch_sdk/$(SDK_VER)/rc/$(OPENOLTDEVICE)/board_files/broadcom/port_speed.soc
########################################################################
##
## BAL proprietary elements - NDA is required with Broadcom
##
## For Accton patch - contact Accton corporation
##
## Not required when building the OpenOLT agent from github source
##
## !!!NOTE: libbal_host_api-nda_req.so is proprietary and must not be
## published in any open debian package or otherwise made
## available to third parties that do not have an SLA and
## NDA with Broadcom
##
BAL_SDK_ZIP = SW-BCM686OLT_$(subst .,_,$(BAL_VER)).tgz
CSG_SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch
RADISYS_PATCH = RADISYS_BAL_$(BAL_VER)_V$(DEV_VER).patch
BROADCOM_IP_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER)-BROADCOM-IP.patch
BCM_SWITCH_SDK = $(BAL_DIR)/switch_sdk/$(SDK_VER)
ZYXEL_PATCH = ZYXEL_BAL_$(BAL_VER)_V$(DEV_VER).patch
sdk: onl
ifeq ("$(wildcard $(BAL_DIR))","")
mkdir $(BAL_DIR)
tar zxvf download/$(BAL_SDK_ZIP) --strip 1 -C $(BAL_DIR)
cp download/$(CSG_SDK_ZIP) $(BCM_SWITCH_SDK)
chmod -R 744 $(BAL_DIR)
ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
cat download/$(RADISYS_PATCH) | patch -p1 -d $(BAL_DIR)
else ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
tar zxf download/sda3016ss_rootfs.tar.gz -C $(BAL_DIR)
cat download/$(ZYXEL_PATCH) | patch -p1 -d $(BAL_DIR)
else
cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR)
cat download/$(BROADCOM_IP_PATCH) | patch -p1 -d $(BAL_DIR)
endif
ifeq ("$(strip $(OPENOLTDEVICE))","asfvolt16")
echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE)
else ifeq ("$(strip $(OPENOLTDEVICE))","asgvolt64")
echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE)
echo "setenv port_speed_for_25 $(PORT_25G_SPEED)" >> $(PORT_SPEED_FILE)
endif
ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
chmod 0755 $(BAL_DIR)/onu_mgmt/libomcistack/me_codegen/omci_stack_codegen
chmod 0755 $(BCM_SWITCH_SDK)/sdk_patches_apply.sh
make -C $(BAL_DIR) BOARD=radisys ONL=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux ONL_DEBIAN_SUITE=$(shell lsb_release -c -s)
make -C $(BAL_DIR) BOARD=radisys release_board
else ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
cp download/Dockerfile $(BAL_DIR)
tar zxf download/linux-4.19.81.tgz -C $(BAL_DIR)
docker build $(BAL_DIR) -t tt_ub18
docker run -v $(TOP_DIR)/$(BAL_DIR):/mnt -w /mnt tt_ub18 bash -c 'make'
cp download/sda3016_nni_init.conf $(BAL_DIR)/sda3016ss_rootfs/opt/bcm68620/
docker run -v $(TOP_DIR)/$(BAL_DIR):/mnt -w /mnt tt_ub18 bash -c 'make release_board'
else
make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) ONL_DIR=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux
make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board
endif
endif
bal-clean:
ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
docker run -v $(TOP_DIR)/$(BAL_DIR):/mnt -w /mnt tt_ub18 bash -c 'make clean_all'
else
make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) clean_all
endif
########################################################################
##
##
## OpenOLT API
##
##
OPENOLT_PROTOS_DIR = ../protos
OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I./device -I./device/$(OPENOLTDEVICE) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens
protos:
if [ ! -f "$(OPENOLT_API_LIB)" ]; then \
make -C $(OPENOLT_PROTOS_DIR) all; \
fi;
protos-clean:
-make -C $(OPENOLT_PROTOS_DIR) clean
########################################################################
##
##
## common
##
##
# A hack to force a re-build of common/main.cc everytime.
# This is needed to bake in the git VCS information in the openolt binary
# at the time of building the openolt package.
common/main.o: .FORCE
.FORCE:
$(CXX) $(CXXFLAGS) $(CPPFLAGS) -I./common -c common/main.cc -o common/main.o
common/%.o: common/%.cc
$(CXX) $(CXXFLAGS) $(CPPFLAGS) -I./common -c $< -o $@
########################################################################
##
##
## device
##
##
device/%.o: device/%.cc
$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -I./common -I./src -c $< -o $@
device/$(OPENOLTDEVICE)/%.o: device/$(OPENOLTDEVICE)/%.cc
$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@
########################################################################
##
##
## openolt
##
##
OLT_SW_UPGRADE_DIR = ../olt-sw-upgrade
SRCS = $(wildcard src/*.cc) $(wildcard common/*.cc) $(wildcard device/*.cc) $(wildcard device/$(OPENOLTDEVICE)/*.cc)
ANSIBLE_DIR = /etc/ansible
OBJS = $(SRCS:.cc=.o)
DEPS = $(SRCS:.cc=.d)
ZYXEL_DOCKER_PATCH = ZYXEL_Docker_V$(DEV_VER).patch
ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
PREREQ = sdk
else
PREREQ = $(BUILD_DIR)/lib$(BALLIBNAME).so sdk protos $(OBJS)
endif
.DEFAULT_GOAL := all
all: $(BUILD_DIR)/openolt
$(BUILD_DIR)/openolt: $(PREREQ)
ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
if [ ! -f "Dockerfile" ]; then \
git apply --whitespace=nowarn download/$(ZYXEL_DOCKER_PATCH); \
fi;
if !(docker images | grep -q onl-builder-8-openolt); then \
docker build . -t onl-builder-8-openolt; \
fi;
docker/tools/onlbuilder -8 --isolate -c make -C agent OPENOLTDEVICE=sda3016ss openolt-in-docker
else
$(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $@ -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc) $(PCAPPLUSPLUS_LIB_PATH)
ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/radisys/release/release_radisys_v$(BAL_VER).tar.gz $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
else
ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/$(OPENOLTDEVICE)/release/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz $(BUILD_DIR)/.
endif
ln -sf $(LIBGRPC_PATH)/libz.so.1 $(BUILD_DIR)/libz.so.1
ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 $(BUILD_DIR)/libstdc++.so.6
strip $(BUILD_DIR)/openolt
echo "inband=n" > $(ONL_DIR)/onl_build.mode
if [ $(INBAND) = y ]; then \
echo "Building ONL+BAL+OpenoltAgent allinone image"; \
make deb; \
make inband-onl; \
fi;
endif
openolt-in-docker: protos $(OBJS)
$(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $(BUILD_DIR)/openolt -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc) $(PCAPPLUSPLUS_LIB_PATH)
ln -sf $(TOP_DIR)/$(BAL_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER)-$(DEV_VER).tar.gz $(BUILD_DIR)/.
ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_reference/host_api/strip/libbal_host_$(BAL_API_TYPE).so $(BUILD_DIR)/.
ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_driver/dev_mgmt_daemon/dev_mgmt_daemon $(BUILD_DIR)/.
ln -sf $(LIBGRPC_PATH)/libz.so.1 $(BUILD_DIR)/libz.so.1
ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 $(BUILD_DIR)/libstdc++.so.6
strip $(BUILD_DIR)/openolt
echo "inband=n" > $(ONL_DIR)/onl_build.mode
mkdir -p tmp/opt/openolt
cp build/libbal_host_$(BAL_API_TYPE).so build/openolt tmp/opt/openolt
tar zcf build/release_$(OPENOLTDEVICE)_openolt_V$(BAL_VER)-$(DEV_VER).tar.gz tmp/
rm -rf tmp
src/%.o: src/%.cc
$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) $(CPPFLAGS) -I./common -c $< -o $@
deb: rxtx-power
ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
mkdir -p device/$(OPENOLTDEVICE)/mkdebian/tmp
cp download/release_$(OPENOLTDEVICE)_custom_V2.0.0.1-$(DEV_VER).tar.gz device/$(OPENOLTDEVICE)/mkdebian/tmp
cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER)-$(DEV_VER) device/$(OPENOLTDEVICE)/mkdebian/tmp
cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_openolt_V$(BAL_VER)-$(DEV_VER).tar.gz device/$(OPENOLTDEVICE)/mkdebian/tmp
else
cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz device/$(OPENOLTDEVICE)/mkdebian/debian
cp $(BUILD_DIR)/openolt device/$(OPENOLTDEVICE)/mkdebian/debian
cp $(BUILD_DIR)/libz.so.1 device/$(OPENOLTDEVICE)/mkdebian/debian
cp $(BUILD_DIR)/libstdc++.so.6 device/$(OPENOLTDEVICE)/mkdebian/debian
cp $(BUILD_DIR)/libbal_host_api-oss.so device/$(OPENOLTDEVICE)/mkdebian/debian
cp -a scripts/init.d device/$(OPENOLTDEVICE)/mkdebian/debian
cp -a $(RXTX_POWER_EXE) device/$(OPENOLTDEVICE)/mkdebian/debian
cp -a scripts/watchdog device/$(OPENOLTDEVICE)/mkdebian/debian
endif
ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
sed -i '/\/opt\/bcm68650\/svk_init.sh/c\ \/opt\/bcm68650\/svk_init.sh -qsfp_speed=$(PORT_QSFP_SPEED) -sfp_speed=$(PORT_SFP_SPEED)' device/$(OPENOLTDEVICE)/mkdebian/debian/init.d/dev_mgmt_daemon
endif
cd device/$(OPENOLTDEVICE)/mkdebian && ./build_$(OPENOLTDEVICE)_deb.sh
mv device/$(OPENOLTDEVICE)/$(OPENOLTDEVICE)_*.deb $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb
make deb-cleanup
inband-onl:
# Clean previous ONL build and build freshly
sudo rm -rf $(ONL_DIR)
mkdir -p $(ONL_DIR)
git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux
cp download/Makefile.onl $(ONL_DIR)/Makefile
install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux
# Check ONL commit equals to Inband patch commit
ONL_COMMIT_ID=$(awk \'/COMMIT_ID = /{print $0}\' $(ONL_DIR)/Makefile | awk -F \"=\" \'{print $2}\')
INBAND_PATCH_COMMIT_ID=$(echo cp $(TOP_DIR)/inband/patch/*.patch | cut -d- -f 2 | cut -d. -f 1)
if [ "$(ONL_COMMIT_ID)" = "$(INBAND_PATCH_COMMIT_ID)" ]; then \
echo "ONL commit and inband patch commit matched."; \
cp $(TOP_DIR)/inband/patch/*.patch $(ONL_DIR)/OpenNetworkLinux; \
cp $(TOP_DIR)/download/disable-certificate-validation-v*.patch $(ONL_DIR)/OpenNetworkLinux; \
else \
echo "ONL commit and inband patch commit does not match. Exiting."; \
exit 1; \
fi;
# Update inband.config file with VLAN ID argument passed
sed -i 's/asfvolt16_vlan_id_eth2=.*/asfvolt16_vlan_id_eth2=$(VLAN_ID)/' $(TOP_DIR)/inband/config/inband.config
sed -i 's/asgvolt64_vlan_id_eth1=.*/asgvolt64_vlan_id_eth1=$(VLAN_ID)/' $(TOP_DIR)/inband/config/inband.config
# Copy Inband config files and olt startup scripts to ONL source code and build
cd $(TOP_DIR) && mkdir -p $(ONL_DIR)/OpenNetworkLinux/bal_packages
cp $(TOP_DIR)/inband/scripts/* $(ONL_DIR)/OpenNetworkLinux/bal_packages
cp $(TOP_DIR)/inband/config/inband.config $(ONL_DIR)/OpenNetworkLinux/bal_packages
cp $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb $(ONL_DIR)/OpenNetworkLinux/bal_packages/openolt_$(OPENOLTDEVICE).deb
cp $(OLT_SW_UPGRADE_DIR)/change_labels.sh $(ONL_DIR)/OpenNetworkLinux/bal_packages
# Rebuild ONL packed with already built BAL+Openolt debian package
make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=y
echo "inband=y" > $(ONL_DIR)/onl_build.mode
make inband-onl-cleanup
# requires 'sudo' privileges
ansible:
(ONL_INSTALLED_INSTALLER="$(shell find "$$(cd ./build/onl/OpenNetworkLinux/RELEASE/jessie/amd64; pwd)" -name "ONL-onl-*_AMD64_INSTALLED_INSTALLER")"; \
rm -rf $(ANSIBLE_DIR)/roles/upgrade/files; \
mkdir -p $(ANSIBLE_DIR)/roles/upgrade/files; \
cp ../olt-sw-upgrade/install_onl.sh $(ANSIBLE_DIR)/roles/upgrade/files; \
chmod +x $(ANSIBLE_DIR)/roles/upgrade/files/*.sh; \
ln -s $$ONL_INSTALLED_INSTALLER $(ANSIBLE_DIR)/roles/upgrade/files/ONL_INSTALLED_INSTALLER)
src/%.o: %.cpp
$(CXX) -MMD -c $< -o $@
rxtx-power: clean-rxtx-power
$(CXX) -std=c++11 -DRXTX_POWER_EXE_MODE src/trx_eeprom_reader.cc -o $(RXTX_POWER_EXE) && ls -l $(RXTX_POWER_EXE)
deb-cleanup: clean-rxtx-power
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).debhelper.log
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).postinst.debhelper
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).postrm.debhelper
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).substvars
@rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE)/
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/debhelper-build-stamp
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libz.so.1
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libstdc++.so.6
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libbal_host_api-oss.so
@rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/init.d/
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/openolt
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
@rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/tmp/
@rm -f device/$(OPENOLTDEVICE)/$(OPENOLTDEVICE)_$(BAL_VER)+edgecore-V$(DEV_VER)_amd64.changes
@rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(RXTX_POWER_EXE)
@rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/watchdog/
@rm -rf device/$(OPENOLTDEVICE)/mkdebian/tmp/
inband-onl-cleanup:
@rm -f $(ONL_DIR)/OpenNetworkLinux/*.patch
@rm -rf $(ONL_DIR)/OpenNetworkLinux/bal_packages
clean: protos-clean deb-cleanup
@rm -f $(OBJS) $(DEPS)
@rm -rf $(OPENOLT_PROTOS_DIR)/googleapis
@rm -f $(BUILD_DIR)/libz.so.1
@rm -f $(BUILD_DIR)/libbal_host_api-oss.so
@rm -f $(BUILD_DIR)/openolt
@rm -f $(BUILD_DIR)/dev_mgmt_daemon
@rm -f $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
@rm -f $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb
clean-src: protos-clean
@rm -f $(OBJS) $(DEPS)
clean-rxtx-power:
@rm -f src/$(RXTX_POWER_EXE)
@rm -f $(RXTX_POWER_EXE)
distclean: clean-src clean
@rm -rf $(BUILD_DIR)
.PHONY: onl sdk bal protos inband-onl ansible .FORCE