Revert "VOL-1298 OpenOLT - new dir structure for 2.0"
This reverts commit e2502c08c9a4eb220cfbd7f1de064b3c809e1797.
Change-Id: I5fe517aad77e202d04a6747abfb7b3ff46351170
diff --git a/agent/Makefile.in b/Makefile.in
similarity index 99%
rename from agent/Makefile.in
rename to Makefile.in
index e437069..7915e27 100644
--- a/agent/Makefile.in
+++ b/Makefile.in
@@ -183,7 +183,7 @@
## OpenOLT API
##
##
-OPENOLT_PROTOS_DIR = ../protos
+OPENOLT_PROTOS_DIR = ./protos
OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens
protos:
diff --git a/agent/README.md b/agent/README.md
deleted file mode 100644
index 557b16b..0000000
--- a/agent/README.md
+++ /dev/null
@@ -1,355 +0,0 @@
-# OpenOLT agent
-
-The *OpenOLT agent* runs on white box Optical Line Terminals (OLTs) and
-provides a gRPC-based management and control interface to OLTs.
-
-The OpenOLT agent is used by [VOLTHA](https://github.com/opencord/voltha)
-through the [OpenOLT
-adapter](https://github.com/opencord/voltha/tree/master/voltha/adapters/openolt).
-
-OpenOLT agent currently supports Broadcom's Maple/Qumran chipsets.
-
-```text
-
- +---------------------------------+
- | VOLTHA |
- | |
- | +------------------+ |
- | | OpenOLT adapter | |
- +-------+--------+---------+------+
- |
- OpenOLT gRPC API |
- |
-+--------------------- ---------------+
-| | |
-| +------------------+ |
-| | OpenOLT agent | |
-| +--------+---------+ |
-| | |
-| Vendor specific | (e.g. Broadcom |
-| API | BAL API |
-| | |
-| +------------------+ |
-| | Vendor SoC/FPGA | |
-| |(e.g Maple/Qumran)| |
-| +------------------+ |
-| |
-| White box OLT |
-+-------------------------------------+
-
-```
-
-## Hardware requirements
-
-A list of tested devices and optics can be found in the [CORD hardware
-requirements](https://github.com/opencord/docs/blob/master/prereqs/hardware.md#suggested-hardware)
-guide, in the *R-CORD access equipment and optics* section.
-
-## Pre-built debian packages of OpenOLT agent for Accton/Edgecore ASFVOLT16
-
-Accton/Edgecore makes available pre-built debian packages of OpenOLT agent to their customers.
-Contact your Accton/Edgecore representative for more information.
-
-The pre-built debian packages have been tested on [this specific version of
-OpenNetworkingLinux
-(ONL)](https://github.com/opencord/OpenNetworkLinux/releases/download/20180124-olt-kernel-3.7.10/ONL-2.0.0_ONL-OS_2018-01-24.0118-1303f20_AMD64_INSTALLED_INSTALLER).
-
-More info on how to install ONL can be found on the official [ONL
-website](https://opennetlinux.org/docs/deploy).
-
-## Install OpenOLT
-
-Copy the debian package to the OLT. For example:
-
-```shell
-scp openolt.deb root@10.6.0.201:~/.
-```
-
-Install the *openolt.deb* package using *dpkg*:
-
-```shell
-dpkg -i openolt.deb
-```
-
-## Run OpenOLT as a Linux service
-
-Rebooting the OLT (after the installation) will start bal_core_dist and openolt as init.d services:
-
-Rebooting the OLT will start the bal_core_dist and openolt services:
-```shell
-reboot
-```
-The services can also be stopped/started manually:
-```shell
-service bal_core_dist stop
-service openolt stop
-service bal_core_dist start
-service openolt start
-```
-
-Check the status of the services:
-```shell
-service bal_core_dist status
-service openolt status
-```
-
-## Run OpenOLT in foreground
-
-Running the bal_core_dist and/or openolt services in the forground is useful for development and debugging. Make sure to first stop the services if they are running in background.
-
-Open a terminal and run the Broadcom BAL software (*bal_core_dist*):
-
-```shell
-cd /broadcom
-./bal_core_dist -C :55001
-```
-
-While the first executable still runs (even in background), open another
-terminal and run *openolt*:
-
-```shell
-cd /broadcom
-./openolt -C 127.0.0.1:55001
-```
-
-> **NOTE**: the two executables will remain open in the terminals, unless they
-> are put in background.
-
-### Connect from VOLTHA
-
-At the VOLTHA CLI, preprovision and enable the OLT:
-
-```shell
-(voltha) preprovision_olt -t openolt -H YOUR_OLT_MGMT_IP:9191
-(voltha) enable
-```
-
-### Additional notes
-
-* *9191* is the TCP port that the *OpenOLT* agent uses for its gRPC channel
-* In the commands above, you can either use the loopback IP address (127.0.0.1)
- or substitute all its occurrences with the management IP of your OLT
-
-## Build OpenOLT
-
-### Supported BAL API versions
-
-Currently, OpenOLT support the Broadcom BAL APIs, version *2.6.0.1*.
-
-### Proprietary software requirements
-
-The following proprietary source code is required to build the OpenOLT agent.
-
-* `SW-BCM68620_<BAL_VER>.zip` - Broadcom BAL source and Maple SDK
-* `sdk-all-<SDK_VER>.tar.gz` - Broadcom Qumran SDK
-* `ACCTON_BAL_<BAL_VER>-<ACCTON_VER>.patch` - Accton/Edgecore's patch
-* `OPENOLT_BAL_<BAL_VER>.patch` - A patch to Broadcom software to allow
- compilation with C++ based openolt
-
-The versions currently supported by the OpenOLT agent are:
-
-* SW-BCM68620_2_6_0_1.zip
-* sdk-all-6.5.7.tar.gz
-* ACCTON_BAL_2.6.0.1-V201804301043.patch
-* OPENOLT_BAL_2.6.0.1.patch
-
-> NOTE: the repository does not contain the above four source packages. These
-> are needed to build the OpenOLT agent executable. Contact
-> [Broadcom](mailto:dave.baron@broadcom.com) to access the source packages.
-
-### System Requirements
-
-OpenOLT agent builds on *Ubuntu 14.04 LTS*.
-
-### Build procedure
-
-Clone the *openolt* repository either from GitHub or from OpenCORD Gerrit:
-
-```shell
-git clone git@github.com:opencord/openolt.git
-or
-git clone https://gerrit.opencord.org/openolt
-```
-
-Copy the Broadcom source and patch files to the openolt/download directory:
-
-```shell
-cd openolt/download
-cp SW-BCM68620_2_6_0_1.zip sdk-all-6.5.7.tar.gz ACCTON_BAL_2.6.0.1-V201804301043.patch OPENOLT_BAL_2.6.0.1.patch ./download
-```
-
-Run Autoconfig to generate the appropriate makefile scaffolding for the desired target
-
-```shell
-cd openolt
-./configure
-```
-
-Run *make prereq* to install the package dependencies.
-This is usually a one-time thing, unless there is a change in the dependencies.
-
-```shell
-make DEVICE=asfvolt16 prereq
-```
-
-Run *make*. This can take a while to complete the first time, since it builds
-ONL and the Broadcom SDKs. Following runs will be much faster, as they only
-build the OpenOLT agent source.
-
-```shell
-make DEVICE=asfvolt16
-```
-
-If the build process succeeds, libraries and executables will be created in the
-*openolt/build* directory.
-
-Optionally, build the debian package that will be installed on the OLT.
-
-```shell
-make DEVICE=asfvolt16 deb
-```
-
-If the build process succeeds, the *openolt.deb* package will be created as
-well in the *openolt/build* directory.
-
-### Cleanup
-
-To cleanup the repository and start the build procedure again, run:
-
-```shell
-make DEVICE=asfvolt16 clean-all
-```
-
-## FAQ
-
-### How to change speed of ASFVOLT16 NNI interface?
-
-Auto-negotiation on the NNI (uplink) interfaces is not tested. By default, the OpenOLT agent sets the speed of the NNI interfaces to 100G. To downgrade the network interface speed to 40G, add the following lines at the end of the qax.soc (/broadcom/qax.soc) configuration file. A restart of the bal_core_dist and openolt executables is required after the change.
-
-```shell
-port ce128 sp=40000
-```
-
-This change can also be made at run-time from the CLI of the bal_core_dist:
-
-```shell
-d/s/shell
-port ce128 speed=40000
-```
-(It is safe to ignore the error msgs.)
-
-### How do I configure rate limiting?
-
-By default, the full 1G xgs-pon bandwidth is available to an ONU when no rate-limiting is applied. There is experimental support available to change the default bandwith and also rate-limit specific ONUs from the voltha CLI.
-
-
-Configure default rate limit (PIR = 5Mbps):
-
-```shell
-(voltha) xpon
-(voltha-xpon )traffic_descriptor_profile create -n "default" -f 1000 -a 1000 -m 5000
-```
-
-
-Configure ONU BRCM12345678 to be rate-limited to 100Mbps:
-```shell
-(voltha) xpon
-(voltha-xpon )traffic_descriptor_profile create -n "default" -f 50000 -a 70000 -m 100000
-```
-
-### Why does the Broadcom ONU not forward eapol packets?
-
-The firmware on the ONU is likely not setup to forward 802.1x on the linux bridge. Drop down to the shell in the Broadcom ONU's console and configure the Linux bridge to forward 802.1x.
-
-```shell
-> sh
-# echo 8 > /sys/class/net/bronu513/bridge/group_fwd_mask
-```
-
-### How do I check packet counters on the ONU?
-
-LAN port packet counters:
-
-```shell
-bs /b/e port/index=lan{0,1,2,3,4,5,6}
-```
-
-WAN port packt counters:
-```shell
-bs /b/e port/index=wan0
-```
-
-### How do I check packet counters on the OLT's PON interface?
-
-Following is an example of retrieving the interface description for PON intf_id 0 (TODO: document PON interface numbering for Edgecore OLT).
-
-```shell
-ACC.0>b/t clear=no object=interface intf_id=0 intf_type=pon
-[-- API Start: bcmbal_stat_get --]
-[-- API Message Data --]
-object: interface - BAL interface object
-get stat: response: OK
-key:
- intf_id=0
- intf_type=pon
-data:
- rx_bytes=18473516
- rx_packets=176416
- rx_ucast_packets=30627
- rx_mcast_packets=2230
- rx_bcast_packets=143559
- rx_error_packets=0
- rx_unknown_protos=0
- rx_crc_errors=0
- bip_errors=0
- tx_bytes=5261350
- tx_packets=39164
- tx_ucast_packets=30583
- tx_mcast_packets=0
- tx_bcast_packets=8581
- tx_error_packets=0
-[-- API Complete: 0 (OK) --]
-```
-
-#### How do I check packet counters on the OLT's NNI interface?
-
-Following command retrieves NNI intf_id 0:
-
-```shell
-ACC.0>b/t clear=no object=interface intf_id=0 intf_type=nniCollecting statistics
-[-- API Start: bcmbal_stat_get --]
-[-- API Message Data --]
-object: interface - BAL interface object
-get stat: response: OK
-key:
- intf_id=0
- intf_type=nni
-data:
- rx_bytes=8588348
- rx_packets=69774
- rx_ucast_packets=61189
- rx_mcast_packets=0
- rx_bcast_packets=8585
- rx_error_packets=0
- rx_unknown_protos=0
- tx_bytes=35354878
- tx_packets=347167
- tx_ucast_packets=61274
- tx_mcast_packets=4447
- tx_bcast_packets=281446
- tx_error_packets=0
-[-- API Complete: 0 (OK) --]
-```
-
-### How do I list flows installed in the OLT?
-
-In the bal_core_dist CLI:
-
-```shell
-> ~, Debug/, Maple/, Board/, Cld/, Transport/, Logger/, Quit
-> Debug
-.../Debug> Rsc_mgr/, Mac_util/, Switch/, sLeep, sHow_config, os/
-> Mac_util
-.../Mac_util> Print_flows, pRint_flows_for_gem, prInt_flows_for_alloc_id, Epon_helper
-> Print_flow
-```
diff --git a/agent/common/Queue.h b/common/Queue.h
similarity index 100%
rename from agent/common/Queue.h
rename to common/Queue.h
diff --git a/agent/common/core.h b/common/core.h
similarity index 100%
rename from agent/common/core.h
rename to common/core.h
diff --git a/agent/common/main.cc b/common/main.cc
similarity index 100%
rename from agent/common/main.cc
rename to common/main.cc
diff --git a/agent/common/server.cc b/common/server.cc
similarity index 100%
rename from agent/common/server.cc
rename to common/server.cc
diff --git a/agent/common/server.h b/common/server.h
similarity index 100%
rename from agent/common/server.h
rename to common/server.h
diff --git a/agent/common/state.h b/common/state.h
similarity index 100%
rename from agent/common/state.h
rename to common/state.h
diff --git a/agent/config.h.in b/config.h.in
similarity index 100%
rename from agent/config.h.in
rename to config.h.in
diff --git a/agent/configure b/configure
similarity index 100%
rename from agent/configure
rename to configure
diff --git a/agent/configure.ac b/configure.ac
similarity index 100%
rename from agent/configure.ac
rename to configure.ac
diff --git a/agent/device/asfvolt16/vendor.cc b/device/asfvolt16/vendor.cc
similarity index 100%
rename from agent/device/asfvolt16/vendor.cc
rename to device/asfvolt16/vendor.cc
diff --git a/agent/device/asfvolt16/vendor.h b/device/asfvolt16/vendor.h
similarity index 100%
rename from agent/device/asfvolt16/vendor.h
rename to device/asfvolt16/vendor.h
diff --git a/agent/device/device.h b/device/device.h
similarity index 100%
rename from agent/device/device.h
rename to device/device.h
diff --git a/agent/device/generic/vendor.cc b/device/generic/vendor.cc
similarity index 100%
rename from agent/device/generic/vendor.cc
rename to device/generic/vendor.cc
diff --git a/agent/device/generic/vendor.h b/device/generic/vendor.h
similarity index 100%
rename from agent/device/generic/vendor.h
rename to device/generic/vendor.h
diff --git a/agent/device/tlabvolt8/vendor.cc b/device/tlabvolt8/vendor.cc
similarity index 100%
rename from agent/device/tlabvolt8/vendor.cc
rename to device/tlabvolt8/vendor.cc
diff --git a/agent/device/tlabvolt8/vendor.h b/device/tlabvolt8/vendor.h
similarity index 100%
rename from agent/device/tlabvolt8/vendor.h
rename to device/tlabvolt8/vendor.h
diff --git a/agent/download/README.md b/download/README.md
similarity index 100%
rename from agent/download/README.md
rename to download/README.md
diff --git a/agent/mkdebian/build_asfvolt16_deb.sh b/mkdebian/build_asfvolt16_deb.sh
similarity index 100%
rename from agent/mkdebian/build_asfvolt16_deb.sh
rename to mkdebian/build_asfvolt16_deb.sh
diff --git a/agent/mkdebian/debian/asfvolt16.install b/mkdebian/debian/asfvolt16.install
similarity index 100%
rename from agent/mkdebian/debian/asfvolt16.install
rename to mkdebian/debian/asfvolt16.install
diff --git a/agent/mkdebian/debian/asfvolt16.postinst b/mkdebian/debian/asfvolt16.postinst
similarity index 100%
rename from agent/mkdebian/debian/asfvolt16.postinst
rename to mkdebian/debian/asfvolt16.postinst
diff --git a/agent/mkdebian/debian/asfvolt16.postrm b/mkdebian/debian/asfvolt16.postrm
similarity index 100%
rename from agent/mkdebian/debian/asfvolt16.postrm
rename to mkdebian/debian/asfvolt16.postrm
diff --git a/agent/mkdebian/debian/asfvolt16.preinst b/mkdebian/debian/asfvolt16.preinst
similarity index 100%
rename from agent/mkdebian/debian/asfvolt16.preinst
rename to mkdebian/debian/asfvolt16.preinst
diff --git a/agent/mkdebian/debian/changelog b/mkdebian/debian/changelog
similarity index 100%
rename from agent/mkdebian/debian/changelog
rename to mkdebian/debian/changelog
diff --git a/agent/mkdebian/debian/compat b/mkdebian/debian/compat
similarity index 100%
rename from agent/mkdebian/debian/compat
rename to mkdebian/debian/compat
diff --git a/agent/mkdebian/debian/control b/mkdebian/debian/control
similarity index 100%
rename from agent/mkdebian/debian/control
rename to mkdebian/debian/control
diff --git a/agent/mkdebian/debian/copyright b/mkdebian/debian/copyright
similarity index 100%
rename from agent/mkdebian/debian/copyright
rename to mkdebian/debian/copyright
diff --git a/agent/mkdebian/debian/files b/mkdebian/debian/files
similarity index 100%
rename from agent/mkdebian/debian/files
rename to mkdebian/debian/files
diff --git a/agent/mkdebian/debian/logrotate.d/openolt b/mkdebian/debian/logrotate.d/openolt
similarity index 100%
rename from agent/mkdebian/debian/logrotate.d/openolt
rename to mkdebian/debian/logrotate.d/openolt
diff --git a/agent/mkdebian/debian/rules b/mkdebian/debian/rules
similarity index 100%
rename from agent/mkdebian/debian/rules
rename to mkdebian/debian/rules
diff --git a/agent/scripts/init.d/bal_core_dist b/scripts/init.d/bal_core_dist
similarity index 100%
rename from agent/scripts/init.d/bal_core_dist
rename to scripts/init.d/bal_core_dist
diff --git a/agent/scripts/init.d/openolt b/scripts/init.d/openolt
similarity index 100%
rename from agent/scripts/init.d/openolt
rename to scripts/init.d/openolt
diff --git a/agent/sim/core.cc b/sim/core.cc
similarity index 100%
rename from agent/sim/core.cc
rename to sim/core.cc
diff --git a/agent/sim/core.h b/sim/core.h
similarity index 100%
rename from agent/sim/core.h
rename to sim/core.h
diff --git a/agent/src/core.cc b/src/core.cc
similarity index 100%
rename from agent/src/core.cc
rename to src/core.cc
diff --git a/agent/src/error_format.cc b/src/error_format.cc
similarity index 100%
rename from agent/src/error_format.cc
rename to src/error_format.cc
diff --git a/agent/src/error_format.h b/src/error_format.h
similarity index 100%
rename from agent/src/error_format.h
rename to src/error_format.h
diff --git a/agent/src/indications.cc b/src/indications.cc
similarity index 100%
rename from agent/src/indications.cc
rename to src/indications.cc
diff --git a/agent/src/indications.h b/src/indications.h
similarity index 100%
rename from agent/src/indications.h
rename to src/indications.h
diff --git a/agent/src/stats_collection.cc b/src/stats_collection.cc
similarity index 100%
rename from agent/src/stats_collection.cc
rename to src/stats_collection.cc
diff --git a/agent/src/stats_collection.h b/src/stats_collection.h
similarity index 100%
rename from agent/src/stats_collection.h
rename to src/stats_collection.h
diff --git a/agent/src/translation.cc b/src/translation.cc
similarity index 100%
rename from agent/src/translation.cc
rename to src/translation.cc
diff --git a/agent/src/translation.h b/src/translation.h
similarity index 100%
rename from agent/src/translation.h
rename to src/translation.h
diff --git a/agent/src/utils.cc b/src/utils.cc
similarity index 100%
rename from agent/src/utils.cc
rename to src/utils.cc
diff --git a/agent/src/utils.h b/src/utils.h
similarity index 100%
rename from agent/src/utils.h
rename to src/utils.h