blob: e437069983a89c2f079e3e63fab22e5a37ead76c [file] [log] [blame]
# Copyright (C) 2018 Open Networking Foundation
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
########################################################################
##
##
## Config
##
##
DEVICE ?= generic
#
# Three vendor proprietary source files are required to build BAL.
# SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK.
# sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK.
# ACCTON_BAL_<BAL_VER>-<DEV_VER>.patch - Accton/Edgecore's patch.
BAL_MAJOR_VER = 02.06
BAL_VER = 2.6.0.1
SDK_VER = 6.5.7
DEV_VER ?= 201804301043
#
# Version of Open Network Linux (ONL).
ONL_KERN_VER_MAJOR = 3.7
ONL_KERN_VER_MINOR = 10
#
# Build directory
BUILD_DIR = build
#
# GRPC installation
GRPC_ADDR = https://github.com/grpc/grpc
GRPC_DST = /tmp/grpc
GRPC_VER = v1.10.x
USER := $(shell echo $(USER))
#
########################################################################
##
##
## Install prerequisites
##
##
HOST_SYSTEM = $(shell uname | cut -f 1 -d_)
SYSTEM ?= $(HOST_SYSTEM)
LIBGRPC_PATH=$(shell pkg-config --libs-only-L grpc | sed s/-L// | sed s/\ //g)
LIBPROTOBUF_PATH=$(shell PKG_CONFIG_ALLOW_SYSTEM_LIBS=true pkg-config --libs-only-L protobuf | sed s/-L// | sed s/\ //g)
CXX = @CXX@
CXXFLAGS += @CXXFLAGS@
CXXFLAGS += $(shell pkg-config --cflags-only-I grpc++)
CPPFLAGS += `pkg-config --cflags protobuf grpc`
CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix
LDFLAGS += @LDFLAGS@
LDFLAGS += `pkg-config --libs protobuf grpc++ grpc` -ldl -lgpr
CXXFLAGSDEVICE = -I./device -I./device/$(DEVICE) -I./device/generic
export CXX CXXFLAGS
prereq:
sudo apt-get -q -y install git pkg-config build-essential autoconf libtool libgflags-dev libgtest-dev clang libc++-dev unzip docker.io
sudo apt-get install -y build-essential autoconf libssl-dev gawk debhelper dh-systemd init-system-helpers
# Install GRPC, libprotobuf and protoc
rm -rf $(GRPC_DST)
git clone -b $(GRPC_VER) $(GRPC_ADDR) $(GRPC_DST)
cd $(GRPC_DST) && git submodule update --init
cd $(GRPC_DST)/third_party/protobuf && ./autogen.sh && ./configure
make -C $(GRPC_DST)/third_party/protobuf
sudo make -C $(GRPC_DST)/third_party/protobuf install
sudo ldconfig
make -C $(GRPC_DST)
sudo make -C $(GRPC_DST) install
sudo ldconfig
docker:
echo $(USER)
sudo groupadd -f docker
ifneq "$(USER)" ""
sudo usermod -aG docker $(USER)
endif
########################################################################
##
##
## ONL
##
##
ONL_KERN_VER = $(ONL_KERN_VER_MAJOR).$(ONL_KERN_VER_MINOR)
ONL_REPO = $(DEVICE)-onl
ONL_DIR = $(BUILD_DIR)/$(ONL_REPO)
onl:
if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \
mkdir -p $(ONL_DIR); \
git clone https://gerrit.opencord.org/$(ONL_REPO) $(ONL_DIR); \
make -C $(ONL_DIR) $(DEVICE)-$(ONL_KERN_VER_MAJOR); \
fi;
onl-force:
make -C $(ONL_DIR) $(DEVICE)-$(ONL_KERN_VER_MAJOR)
distclean-onl:
sudo rm -rf $(ONL_DIR)
########################################################################
##
##
## BAL
##
##
BAL_ZIP = SW-BCM68620_$(subst .,_,$(BAL_VER)).zip
SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch
OPENOLT_BAL_PATCH = OPENOLT_BAL_$(BAL_VER).patch
BAL_DIR = $(BUILD_DIR)/$(DEVICE)-bal
ONL_KERNDIR = $(PWD)/$(ONL_DIR)/OpenNetworkLinux/packages/base/amd64/kernels/kernel-$(ONL_KERN_VER_MAJOR)-x86-64-all/builds
MAPLE_KERNDIR = $(BAL_DIR)/bcm68620_release/$(DEVICE)/kernels
BCM_SDK = $(BAL_DIR)/bal_release/3rdparty/bcm-sdk
BALLIBDIR = $(BAL_DIR)/bal_release/build/core/src/apps/bal_api_dist_shared_lib
BALLIBNAME = bal_api_dist
BAL_INC = -I$(BAL_DIR)/bal_release/src/common/os_abstraction \
-I$(BAL_DIR)/bal_release/src/common/os_abstraction/posix \
-I$(BAL_DIR)/bal_release/src/common/config \
-I$(BAL_DIR)/bal_release/src/core/platform \
-I$(BAL_DIR)/bal_release/src/core/main \
-I$(BAL_DIR)/bal_release/src/common/include \
-I$(BAL_DIR)/bal_release/src/lib/libbalapi \
-I$(BAL_DIR)/bal_release/src/balapiend \
-I$(BAL_DIR)/bal_release/src/common/dev_log \
-I$(BAL_DIR)/bal_release/src/common/bal_dist_utils \
-I$(BAL_DIR)/bal_release/src/lib/libtopology \
-I$(BAL_DIR)/bal_release/src/lib/libcmdline \
-I$(BAL_DIR)/bal_release/src/lib/libutils \
-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/utils \
-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/model \
-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/api \
-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_reference/cli
CXXFLAGS += $(BAL_INC) -I $(BAL_DIR)/lib/cmdline
CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST -DENABLE_LOG
sdk: onl
ifeq ("$(wildcard $(BAL_DIR))","")
mkdir $(BAL_DIR)
unzip download/$(BAL_ZIP) -d $(BAL_DIR)
cp download/$(SDK_ZIP) $(BCM_SDK)
chmod -R 744 $(BAL_DIR)
cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR)
mkdir -p $(MAPLE_KERNDIR)
ln -s $(ONL_KERNDIR)/linux-$(ONL_KERN_VER) $(MAPLE_KERNDIR)/linux-$(ONL_KERN_VER)
ln -s $(ONL_DIR)/OpenNetworkLinux/packages/base/any/kernels/archives/linux-$(ONL_KERN_VER).tar.xz $(MAPLE_KERNDIR)/linux-$(ONL_KERN_VER).tar.xz
ln -s $(ONL_DIR)/OpenNetworkLinux/packages/base/any/kernels/$(ONL_KERN_VER_MAJOR)/configs/x86_64-all/x86_64-all.config $(MAPLE_KERNDIR)/x86_64-all.config
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) maple_sdk_dir
cat download/$(OPENOLT_BAL_PATCH) | patch -p1 -d $(BAL_DIR)
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) maple_sdk
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) switch_sdk_dir
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) switch_sdk
KERNDIR=$(ONL_KERNDIR)/linux-$(ONL_KERN_VER) BOARD=$(DEVICE) ARCH=x86_64 SDKBUILD=build_bcm_user make -C $(BCM_SDK)/build-$(DEVICE)/sdk-all-$(SDK_VER)/systems/linux/user/x86-generic_64-2_6
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) bal
echo 'auto_create_interface_tm=y' >> $(BAL_DIR)/bal_release/3rdparty/maple/cur/$(DEVICE)/board_files/broadcom/bal_config.ini
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) release_board
endif
bal: sdk
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) bal
echo 'auto_create_interface_tm=y' >> $(BAL_DIR)/bal_release/3rdparty/maple/cur/asfvolt16/board_files/broadcom/bal_config.ini
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) release_board
bal-clean:
make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) clean_bal
########################################################################
##
##
## OpenOLT API
##
##
OPENOLT_PROTOS_DIR = ../protos
OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens
protos:
make -C $(OPENOLT_PROTOS_DIR) all
protos-clean:
-make -C $(OPENOLT_PROTOS_DIR) clean
########################################################################
##
##
## common
##
##
common/%.o: common/%.cc
$(CXX) $(CXXFLAGS) -I./common -c $< -o $@
########################################################################
##
##
## device
##
##
device/$(DEVICE)/%.o: device/$(DEVICE)/%.cc
$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@
device/generic/%.o: device/generic/%.cc
$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@
########################################################################
##
##
## sim
##
##
SIM_SRCS = $(wildcard sim/*.cc) $(wildcard common/*.cc)
SIM_OBJS = $(SIM_SRCS:.cc=.o)
SIM_DEPS = $(SIM_SRCS:.cc=.d)
sim: sim/openoltsim
sim/openoltsim: protos $(SIM_OBJS)
$(CXX) -pthread -L/usr/local/lib $(SIM_OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -lgrpc++ -lgrpc -lpthread -ldl
sim/%.o: sim/%.cc
$(CXX) -std=c++11 -fpermissive -Wno-literal-suffix -I./common -I$(OPENOLT_PROTOS_DIR) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens -c $< -o $@
clean-sim:
rm -f sim/openoltsim $(SIM_OBJS) $(SIM_DEPS)
########################################################################
##
##
## openolt
##
##
SRCS = $(wildcard src/*.cc) $(wildcard common/*.cc) $(wildcard device/$(DEVICE)/*.cc)
OBJS = $(SRCS:.cc=.o)
DEPS = $(SRCS:.cc=.d)
.DEFAULT_GOAL := all
all: $(BUILD_DIR)/openolt
$(BUILD_DIR)/openolt: sdk protos $(OBJS)
$(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $@ -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc)
ln -sf $(PWD)/$(BAL_DIR)/bcm68620_release/$(DEVICE)/release/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(DEV_VER).tar.gz $(BUILD_DIR)/.
ln -sf $(PWD)/$(BAL_DIR)/bcm68620_release/$(DEVICE)/release/broadcom/libbal_api_dist.so $(BUILD_DIR)/.
ln -sf $(PWD)/$(BAL_DIR)/bal_release/build/core/src/apps/bal_core_dist/bal_core_dist $(BUILD_DIR)/.
ln -sf $(LIBGRPC_PATH)/libgrpc.so.6 $(BUILD_DIR)/libgrpc.so.6
ln -sf $(LIBGRPC_PATH)/libgrpc++.so.1 $(BUILD_DIR)/libgrpc++.so.1
src/%.o: src/%.cc
$(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -I./common -c $< -o $@
deb:
cp $(BUILD_DIR)/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(DEV_VER).tar.gz mkdebian/debian
cp $(BUILD_DIR)/openolt mkdebian/debian
cp $(BUILD_DIR)/libgrpc.so.6 mkdebian/debian
cp $(BUILD_DIR)/libgrpc++.so.1 mkdebian/debian
cp -a scripts/init.d mkdebian/debian
cd mkdebian && ./build_$(DEVICE)_deb.sh
mv *.deb $(BUILD_DIR)/openolt.deb
make deb-cleanup
src/%.o: %.cpp
$(CXX) -MMD -c $< -o $@
deb-cleanup:
rm -f mkdebian/debian/$(DEVICE).debhelper.log
rm -f mkdebian/debian/$(DEVICE).postinst.debhelper
rm -f mkdebian/debian/$(DEVICE).postrm.debhelper
rm -f mkdebian/debian/$(DEVICE).substvars
rm -rf mkdebian/debian/$(DEVICE)/
rm -f mkdebian/debian/libgrpc++.so.1
rm -f mkdebian/debian/libgrpc.so.6
rm -f mkdebian/debian/openolt
rm -f mkdebian/debian/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(DEV_VER).tar.gz
rm -rf mkdebian/debian/tmp/
rm -f $(DEVICE)_$(BAL_VER)+edgecore-V$(DEV_VER)_amd64.changes
clean: protos-clean deb-cleanup
rm -f $(OBJS) $(DEPS)
rm -rf protos/googleapis
rm -f $(BUILD_DIR)/libgrpc.so.6 $(BUILD_DIR)/libgrpc++.so.1
rm -f $(BUILD_DIR)/libbal_api_dist.so
rm -f $(BUILD_DIR)/openolt
rm -f $(BUILD_DIR)/bal_core_dist
rm -f $(BUILD_DIR)/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(DEV_VER).tar.gz
rm -f $(BUILD_DIR)/openolt.deb
distclean:
rm -rf $(BUILD_DIR)
.PHONY: onl sdk bal protos prereq sim