Makefile - openolt - Gitiles

 # Copyright (C) 2018 Open Networking Foundation
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation, either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.

 ########################################################################
 ##
 ##
 ##        Config
 ##
 ##
 DEVICE = asfvolt16
 #
 # Three vendor proprietary source files are required to build BAL.
 # SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK.
 # sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK.
 # ACCTON_BAL_<BAL_VER>-<ACCTON_VER>.patch - Accton/Edgecore's patch.
 BAL_MAJOR_VER = 02.06
 BAL_VER = 2.6.0.1
 SDK_VER = 6.5.7
 ACCTON_VER = 201804301043
 #
 # Version of Open Network Linux (ONL).
 ONL_KERN_VER_MAJOR = 3.7
 ONL_KERN_VER_MINOR = 10
 #
 # Build directory
 BUILD_DIR = build
 #
 # GRPC installation
 GRPC_ADDR = https://github.com/grpc/grpc
 GRPC_DST = /tmp/grpc
 GRPC_VER = v1.10.x

 USER := $(shell echo $(USER))
 #
 ########################################################################
 ##
 ##
 ##        Install prerequisites
 ##
 ##
 HOST_SYSTEM = $(shell uname | cut -f 1 -d_)
 SYSTEM ?= $(HOST_SYSTEM)

 CXX = g++
 CPPFLAGS += `pkg-config --cflags protobuf grpc`
 CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix
 LDFLAGS += -L/usr/local/lib `pkg-config --libs grpc++ grpc` -ldl

 prereq:
 	sudo apt-get -q -y install git pkg-config build-essential autoconf libtool libgflags-dev libgtest-dev clang libc++-dev unzip docker.io
 	sudo apt-get install -y build-essential autoconf libssl-dev gawk debhelper dh-systemd init-system-helpers

 	# Install GRPC, libprotobuf and protoc
 	rm -rf $(GRPC_DST)
 	git clone -b $(GRPC_VER) $(GRPC_ADDR) $(GRPC_DST)
 	cd $(GRPC_DST) && git submodule update --init
 	cd $(GRPC_DST)/third_party/protobuf && ./autogen.sh && ./configure
 	make -C $(GRPC_DST)/third_party/protobuf
 	sudo make -C $(GRPC_DST)/third_party/protobuf install
 	sudo ldconfig
 	make -C $(GRPC_DST)
 	sudo make -C $(GRPC_DST) install
 	sudo ldconfig

 docker:
 	echo $(USER)
 	sudo groupadd -f docker
 ifneq "$(USER)" ""
 	sudo usermod -aG docker $(USER)
 endif

 ########################################################################
 ##
 ##
 ##        ONL
 ##
 ##
 ONL_KERN_VER = $(ONL_KERN_VER_MAJOR).$(ONL_KERN_VER_MINOR)
 ONL_REPO = $(DEVICE)-onl
 ONL_DIR = $(BUILD_DIR)/$(ONL_REPO)
 onl:
 	if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \
 		mkdir -p $(ONL_DIR); \
 		git clone https://gerrit.opencord.org/$(ONL_REPO) $(ONL_DIR); \
 		make -C $(ONL_DIR) $(DEVICE)-$(ONL_KERN_VER_MAJOR); \
 	fi;
 onl-force:
 	make -C $(ONL_DIR) $(DEVICE)-$(ONL_KERN_VER_MAJOR)
 distclean-onl:
 	sudo rm -rf $(ONL_DIR)

 ########################################################################
 ##
 ##
 ##        BAL
 ##
 ##
 BAL_ZIP = SW-BCM68620_$(subst .,_,$(BAL_VER)).zip
 SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
 ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(ACCTON_VER).patch
 OPENOLT_BAL_PATCH = OPENOLT_BAL_$(BAL_VER).patch
 BAL_DIR = $(BUILD_DIR)/$(DEVICE)-bal
 ONL_KERNDIR = $(PWD)/$(ONL_DIR)/OpenNetworkLinux/packages/base/amd64/kernels/kernel-$(ONL_KERN_VER_MAJOR)-x86-64-all/builds
 MAPLE_KERNDIR = $(BAL_DIR)/bcm68620_release/$(DEVICE)/kernels
 BCM_SDK = $(BAL_DIR)/bal_release/3rdparty/bcm-sdk
 BALLIBDIR = $(BAL_DIR)/bal_release/build/core/src/apps/bal_api_dist_shared_lib
 BALLIBNAME = bal_api_dist
 BAL_INC = -I$(BAL_DIR)/bal_release/src/common/os_abstraction \
 	-I$(BAL_DIR)/bal_release/src/common/os_abstraction/posix \
 	-I$(BAL_DIR)/bal_release/src/common/config \
 	-I$(BAL_DIR)/bal_release/src/core/platform \
 	-I$(BAL_DIR)/bal_release/src/core/main \
 	-I$(BAL_DIR)/bal_release/src/common/include \
 	-I$(BAL_DIR)/bal_release/src/lib/libbalapi \
 	-I$(BAL_DIR)/bal_release/src/balapiend \
 	-I$(BAL_DIR)/bal_release/src/common/dev_log \
 	-I$(BAL_DIR)/bal_release/src/common/bal_dist_utils  \
 	-I$(BAL_DIR)/bal_release/src/lib/libtopology \
 	-I$(BAL_DIR)/bal_release/src/lib/libcmdline \
 	-I$(BAL_DIR)/bal_release/src/lib/libutils \
 	-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/utils \
 	-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/model \
 	-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/api \
 	-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_reference/cli
 CXXFLAGS += $(BAL_INC) -I $(BAL_DIR)/lib/cmdline
 CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST

 sdk: onl
 ifeq ("$(wildcard $(BAL_DIR))","")
 	mkdir $(BAL_DIR)
 	unzip download/$(BAL_ZIP) -d $(BAL_DIR)
 	cp download/$(SDK_ZIP) $(BCM_SDK)
 	chmod -R 744 $(BAL_DIR)
 	cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR)
 	mkdir -p $(MAPLE_KERNDIR)
 	ln -s $(ONL_KERNDIR)/linux-$(ONL_KERN_VER) $(MAPLE_KERNDIR)/linux-$(ONL_KERN_VER)
 	ln -s $(ONL_DIR)/OpenNetworkLinux/packages/base/any/kernels/archives/linux-$(ONL_KERN_VER).tar.xz $(MAPLE_KERNDIR)/linux-$(ONL_KERN_VER).tar.xz
 	ln -s $(ONL_DIR)/OpenNetworkLinux/packages/base/any/kernels/$(ONL_KERN_VER_MAJOR)/configs/x86_64-all/x86_64-all.config $(MAPLE_KERNDIR)/x86_64-all.config
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) maple_sdk_dir
 	cat download/$(OPENOLT_BAL_PATCH) | patch -p1 -d $(BAL_DIR)
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) maple_sdk
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) switch_sdk_dir
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) switch_sdk
 	KERNDIR=$(ONL_KERNDIR)/linux-$(ONL_KERN_VER) BOARD=$(DEVICE) ARCH=x86_64 SDKBUILD=build_bcm_user make -C $(BCM_SDK)/build-$(DEVICE)/sdk-all-$(SDK_VER)/systems/linux/user/x86-generic_64-2_6
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) bal
 	echo 'auto_create_interface_tm=y' >> $(BAL_DIR)/bal_release/3rdparty/maple/cur/$(DEVICE)/board_files/broadcom/bal_config.ini
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) release_board
 endif

 bal: sdk
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) bal
 	echo 'auto_create_interface_tm=y' >> $(BAL_DIR)/bal_release/3rdparty/maple/cur/asfvolt16/board_files/broadcom/bal_config.ini
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) release_board

 bal-clean:
 	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) clean_bal

 ########################################################################
 ##
 ##
 ##        OpenOLT API
 ##
 ##
 OPENOLT_PROTOS_DIR = ./protos
 OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
 CXXFLAGS += -I./$(OPENOLT_PROTOS_DIR) -I $(OPENOLT_PROTOS_DIR)/googleapis/gens
 protos:
 	make -C $(OPENOLT_PROTOS_DIR) all
 protos-clean:
 	-make -C $(OPENOLT_PROTOS_DIR) clean

 ########################################################################
 ##
 ##
 ##        openoltsim
 ##
 ##
 SIM_SRCS = $(wildcard openoltsim/*.cc)
 SIM_OBJS = $(SIM_SRCS:.cc=.o)
 SIM_DEPS = $(SIM_SRCS:.cc=.d)
 openoltsim: $(BUILD_DIR)/openoltsim
 $(BUILD_DIR)/openoltsim: protos $(SIM_OBJS)
 	$(CXX) -pthread -L/usr/local/lib $(SIM_OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -lgrpc++ -lgrpc -lpthread -ldl

 ########################################################################
 ##
 ##
 ##        Main
 ##
 ##
 SRCS = $(wildcard src/*.cc)
 OBJS = $(SRCS:.cc=.o)
 DEPS = $(SRCS:.cc=.d)
 .DEFAULT_GOAL := all
 all: $(BUILD_DIR)/openolt
 $(BUILD_DIR)/openolt: sdk protos $(OBJS)
 	$(CXX) -pthread -L/usr/local/lib -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -l$(BALLIBNAME) -lgrpc++ -lgrpc -lpthread -ldl
 	ln -sf $(PWD)/$(BAL_DIR)/bcm68620_release/$(DEVICE)/release/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz $(BUILD_DIR)/.
 	ln -sf $(PWD)/$(BAL_DIR)/bcm68620_release/$(DEVICE)/release/broadcom/libbal_api_dist.so $(BUILD_DIR)/.
 	ln -sf $(PWD)/$(BAL_DIR)/bal_release/build/core/src/apps/bal_core_dist/bal_core_dist $(BUILD_DIR)/.
 	ln -sf $(shell ldconfig -p | grep libgrpc.so.6 | tr ' ' '\n' | grep /) $(BUILD_DIR)/libgrpc.so.6
 	ln -sf $(shell ldconfig -p | grep libgrpc++.so.1 | tr ' ' '\n' | grep /) $(BUILD_DIR)/libgrpc++.so.1

 deb:
 	cp $(BUILD_DIR)/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz mkdebian/debian
 	cp $(BUILD_DIR)/openolt mkdebian/debian
 	cp $(BUILD_DIR)/libgrpc.so.6 mkdebian/debian
 	cp $(BUILD_DIR)/libgrpc++.so.1 mkdebian/debian
 	cd mkdebian && ./build_$(DEVICE)_deb.sh
 	mv *.deb $(BUILD_DIR)/openolt.deb
 	make deb-cleanup

 src/%.o: %.cpp
 	$(CXX) -MMD -c $< -o $@

 deb-cleanup:
 	rm -f mkdebian/debian/$(DEVICE).debhelper.log
 	rm -f mkdebian/debian/$(DEVICE).postinst.debhelper
 	rm -f mkdebian/debian/$(DEVICE).postrm.debhelper
 	rm -f mkdebian/debian/$(DEVICE).substvars
 	rm -rf mkdebian/debian/$(DEVICE)/
 	rm -f mkdebian/debian/libgrpc++.so.1
 	rm -f mkdebian/debian/libgrpc.so.6
 	rm -f mkdebian/debian/openolt
 	rm -f mkdebian/debian/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz
 	rm -rf mkdebian/debian/tmp/
 	rm -f $(DEVICE)_$(BAL_VER)+edgecore-V$(ACCTON_VER)_amd64.changes

 clean: protos-clean deb-cleanup
 	rm -f $(OBJS) $(DEPS)
 	rm -rf protos/googleapis
 	rm -f $(BUILD_DIR)/libgrpc.so.6 $(BUILD_DIR)/libgrpc++.so.1
 	rm -f $(BUILD_DIR)/libbal_api_dist.so
 	rm -f $(BUILD_DIR)/openolt
 	rm -f $(BUILD_DIR)/bal_core_dist
 	rm -f $(BUILD_DIR)/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz
 	rm -f $(BUILD_DIR)/openolt.deb

 distclean:
 	rm -rf $(BUILD_DIR)

 .PHONY: onl sdk bal protos prereq openoltsim
	# Copyright (C) 2018 Open Networking Foundation
	#
	# This program is free software: you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation, either version 3 of the License, or
	# (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program. If not, see <http://www.gnu.org/licenses/>.

	########################################################################
	##
	##
	## Config
	##
	##
	DEVICE = asfvolt16
	#
	# Three vendor proprietary source files are required to build BAL.
	# SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK.
	# sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK.
	# ACCTON_BAL_<BAL_VER>-<ACCTON_VER>.patch - Accton/Edgecore's patch.
	BAL_MAJOR_VER = 02.06
	BAL_VER = 2.6.0.1
	SDK_VER = 6.5.7
	ACCTON_VER = 201804301043
	#
	# Version of Open Network Linux (ONL).
	ONL_KERN_VER_MAJOR = 3.7
	ONL_KERN_VER_MINOR = 10
	#
	# Build directory
	BUILD_DIR = build
	#
	# GRPC installation
	GRPC_ADDR = https://github.com/grpc/grpc
	GRPC_DST = /tmp/grpc
	GRPC_VER = v1.10.x

	USER := $(shell echo $(USER))
	#
	########################################################################
	##
	##
	## Install prerequisites
	##
	##
	HOST_SYSTEM = $(shell uname \| cut -f 1 -d_)
	SYSTEM ?= $(HOST_SYSTEM)

	CXX = g++
	CPPFLAGS += `pkg-config --cflags protobuf grpc`
	CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix
	LDFLAGS += -L/usr/local/lib `pkg-config --libs grpc++ grpc` -ldl

	prereq:
	sudo apt-get -q -y install git pkg-config build-essential autoconf libtool libgflags-dev libgtest-dev clang libc++-dev unzip docker.io
	sudo apt-get install -y build-essential autoconf libssl-dev gawk debhelper dh-systemd init-system-helpers

	# Install GRPC, libprotobuf and protoc
	rm -rf $(GRPC_DST)
	git clone -b $(GRPC_VER) $(GRPC_ADDR) $(GRPC_DST)
	cd $(GRPC_DST) && git submodule update --init
	cd $(GRPC_DST)/third_party/protobuf && ./autogen.sh && ./configure
	make -C $(GRPC_DST)/third_party/protobuf
	sudo make -C $(GRPC_DST)/third_party/protobuf install
	sudo ldconfig
	make -C $(GRPC_DST)
	sudo make -C $(GRPC_DST) install
	sudo ldconfig

	docker:
	echo $(USER)
	sudo groupadd -f docker
	ifneq "$(USER)" ""
	sudo usermod -aG docker $(USER)
	endif

	########################################################################
	##
	##
	## ONL
	##
	##
	ONL_KERN_VER = $(ONL_KERN_VER_MAJOR).$(ONL_KERN_VER_MINOR)
	ONL_REPO = $(DEVICE)-onl
	ONL_DIR = $(BUILD_DIR)/$(ONL_REPO)
	onl:
	if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \
	mkdir -p $(ONL_DIR); \
	git clone https://gerrit.opencord.org/$(ONL_REPO) $(ONL_DIR); \
	make -C $(ONL_DIR) $(DEVICE)-$(ONL_KERN_VER_MAJOR); \
	fi;
	onl-force:
	make -C $(ONL_DIR) $(DEVICE)-$(ONL_KERN_VER_MAJOR)
	distclean-onl:
	sudo rm -rf $(ONL_DIR)

	########################################################################
	##
	##
	## BAL
	##
	##
	BAL_ZIP = SW-BCM68620_$(subst .,_,$(BAL_VER)).zip
	SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
	ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(ACCTON_VER).patch
	OPENOLT_BAL_PATCH = OPENOLT_BAL_$(BAL_VER).patch
	BAL_DIR = $(BUILD_DIR)/$(DEVICE)-bal
	ONL_KERNDIR = $(PWD)/$(ONL_DIR)/OpenNetworkLinux/packages/base/amd64/kernels/kernel-$(ONL_KERN_VER_MAJOR)-x86-64-all/builds
	MAPLE_KERNDIR = $(BAL_DIR)/bcm68620_release/$(DEVICE)/kernels
	BCM_SDK = $(BAL_DIR)/bal_release/3rdparty/bcm-sdk
	BALLIBDIR = $(BAL_DIR)/bal_release/build/core/src/apps/bal_api_dist_shared_lib
	BALLIBNAME = bal_api_dist
	BAL_INC = -I$(BAL_DIR)/bal_release/src/common/os_abstraction \
	-I$(BAL_DIR)/bal_release/src/common/os_abstraction/posix \
	-I$(BAL_DIR)/bal_release/src/common/config \
	-I$(BAL_DIR)/bal_release/src/core/platform \
	-I$(BAL_DIR)/bal_release/src/core/main \
	-I$(BAL_DIR)/bal_release/src/common/include \
	-I$(BAL_DIR)/bal_release/src/lib/libbalapi \
	-I$(BAL_DIR)/bal_release/src/balapiend \
	-I$(BAL_DIR)/bal_release/src/common/dev_log \
	-I$(BAL_DIR)/bal_release/src/common/bal_dist_utils \
	-I$(BAL_DIR)/bal_release/src/lib/libtopology \
	-I$(BAL_DIR)/bal_release/src/lib/libcmdline \
	-I$(BAL_DIR)/bal_release/src/lib/libutils \
	-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/utils \
	-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/model \
	-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_driver/api \
	-I$(BAL_DIR)/bal_release/3rdparty/maple/sdk/host_reference/cli
	CXXFLAGS += $(BAL_INC) -I $(BAL_DIR)/lib/cmdline
	CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST

	sdk: onl
	ifeq ("$(wildcard $(BAL_DIR))","")
	mkdir $(BAL_DIR)
	unzip download/$(BAL_ZIP) -d $(BAL_DIR)
	cp download/$(SDK_ZIP) $(BCM_SDK)
	chmod -R 744 $(BAL_DIR)
	cat download/$(ACCTON_PATCH) \| patch -p1 -d $(BAL_DIR)
	mkdir -p $(MAPLE_KERNDIR)
	ln -s $(ONL_KERNDIR)/linux-$(ONL_KERN_VER) $(MAPLE_KERNDIR)/linux-$(ONL_KERN_VER)
	ln -s $(ONL_DIR)/OpenNetworkLinux/packages/base/any/kernels/archives/linux-$(ONL_KERN_VER).tar.xz $(MAPLE_KERNDIR)/linux-$(ONL_KERN_VER).tar.xz
	ln -s $(ONL_DIR)/OpenNetworkLinux/packages/base/any/kernels/$(ONL_KERN_VER_MAJOR)/configs/x86_64-all/x86_64-all.config $(MAPLE_KERNDIR)/x86_64-all.config
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) maple_sdk_dir
	cat download/$(OPENOLT_BAL_PATCH) \| patch -p1 -d $(BAL_DIR)
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) maple_sdk
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) switch_sdk_dir
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) switch_sdk
	KERNDIR=$(ONL_KERNDIR)/linux-$(ONL_KERN_VER) BOARD=$(DEVICE) ARCH=x86_64 SDKBUILD=build_bcm_user make -C $(BCM_SDK)/build-$(DEVICE)/sdk-all-$(SDK_VER)/systems/linux/user/x86-generic_64-2_6
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) bal
	echo 'auto_create_interface_tm=y' >> $(BAL_DIR)/bal_release/3rdparty/maple/cur/$(DEVICE)/board_files/broadcom/bal_config.ini
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) release_board
	endif

	bal: sdk
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) bal
	echo 'auto_create_interface_tm=y' >> $(BAL_DIR)/bal_release/3rdparty/maple/cur/asfvolt16/board_files/broadcom/bal_config.ini
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) release_board

	bal-clean:
	make -C $(BAL_DIR)/bal_release BOARD=$(DEVICE) clean_bal

	########################################################################
	##
	##
	## OpenOLT API
	##
	##
	OPENOLT_PROTOS_DIR = ./protos
	OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
	CXXFLAGS += -I./$(OPENOLT_PROTOS_DIR) -I $(OPENOLT_PROTOS_DIR)/googleapis/gens
	protos:
	make -C $(OPENOLT_PROTOS_DIR) all
	protos-clean:
	-make -C $(OPENOLT_PROTOS_DIR) clean

	########################################################################
	##
	##
	## openoltsim
	##
	##
	SIM_SRCS = $(wildcard openoltsim/*.cc)
	SIM_OBJS = $(SIM_SRCS:.cc=.o)
	SIM_DEPS = $(SIM_SRCS:.cc=.d)
	openoltsim: $(BUILD_DIR)/openoltsim
	$(BUILD_DIR)/openoltsim: protos $(SIM_OBJS)
	$(CXX) -pthread -L/usr/local/lib $(SIM_OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -lgrpc++ -lgrpc -lpthread -ldl

	########################################################################
	##
	##
	## Main
	##
	##
	SRCS = $(wildcard src/*.cc)
	OBJS = $(SRCS:.cc=.o)
	DEPS = $(SRCS:.cc=.d)
	.DEFAULT_GOAL := all
	all: $(BUILD_DIR)/openolt
	$(BUILD_DIR)/openolt: sdk protos $(OBJS)
	$(CXX) -pthread -L/usr/local/lib -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) /usr/local/lib/libprotobuf.a -o $@ -l$(BALLIBNAME) -lgrpc++ -lgrpc -lpthread -ldl
	ln -sf $(PWD)/$(BAL_DIR)/bcm68620_release/$(DEVICE)/release/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz $(BUILD_DIR)/.
	ln -sf $(PWD)/$(BAL_DIR)/bcm68620_release/$(DEVICE)/release/broadcom/libbal_api_dist.so $(BUILD_DIR)/.
	ln -sf $(PWD)/$(BAL_DIR)/bal_release/build/core/src/apps/bal_core_dist/bal_core_dist $(BUILD_DIR)/.
	ln -sf $(shell ldconfig -p \| grep libgrpc.so.6 \| tr ' ' '\n' \| grep /) $(BUILD_DIR)/libgrpc.so.6
	ln -sf $(shell ldconfig -p \| grep libgrpc++.so.1 \| tr ' ' '\n' \| grep /) $(BUILD_DIR)/libgrpc++.so.1

	deb:
	cp $(BUILD_DIR)/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz mkdebian/debian
	cp $(BUILD_DIR)/openolt mkdebian/debian
	cp $(BUILD_DIR)/libgrpc.so.6 mkdebian/debian
	cp $(BUILD_DIR)/libgrpc++.so.1 mkdebian/debian
	cd mkdebian && ./build_$(DEVICE)_deb.sh
	mv *.deb $(BUILD_DIR)/openolt.deb
	make deb-cleanup

	src/%.o: %.cpp
	$(CXX) -MMD -c $< -o $@

	deb-cleanup:
	rm -f mkdebian/debian/$(DEVICE).debhelper.log
	rm -f mkdebian/debian/$(DEVICE).postinst.debhelper
	rm -f mkdebian/debian/$(DEVICE).postrm.debhelper
	rm -f mkdebian/debian/$(DEVICE).substvars
	rm -rf mkdebian/debian/$(DEVICE)/
	rm -f mkdebian/debian/libgrpc++.so.1
	rm -f mkdebian/debian/libgrpc.so.6
	rm -f mkdebian/debian/openolt
	rm -f mkdebian/debian/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz
	rm -rf mkdebian/debian/tmp/
	rm -f $(DEVICE)_$(BAL_VER)+edgecore-V$(ACCTON_VER)_amd64.changes

	clean: protos-clean deb-cleanup
	rm -f $(OBJS) $(DEPS)
	rm -rf protos/googleapis
	rm -f $(BUILD_DIR)/libgrpc.so.6 $(BUILD_DIR)/libgrpc++.so.1
	rm -f $(BUILD_DIR)/libbal_api_dist.so
	rm -f $(BUILD_DIR)/openolt
	rm -f $(BUILD_DIR)/bal_core_dist
	rm -f $(BUILD_DIR)/release_$(DEVICE)_V$(BAL_MAJOR_VER).$(ACCTON_VER).tar.gz
	rm -f $(BUILD_DIR)/openolt.deb

	distclean:
	rm -rf $(BUILD_DIR)

	.PHONY: onl sdk bal protos prereq openoltsim