Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1 | /* |
Girish Gowdra | a707e7c | 2019-11-07 11:36:13 +0530 | [diff] [blame] | 2 | * Copyright 2018-present Open Networking Foundation |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 3 | |
Girish Gowdra | a707e7c | 2019-11-07 11:36:13 +0530 | [diff] [blame] | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 7 | |
Girish Gowdra | a707e7c | 2019-11-07 11:36:13 +0530 | [diff] [blame] | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 9 | |
Girish Gowdra | a707e7c | 2019-11-07 11:36:13 +0530 | [diff] [blame] | 10 | * Unless required by applicable law or agreed to in writing, software |
| 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | * See the License for the specific language governing permissions and |
| 14 | * limitations under the License. |
| 15 | */ |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 16 | |
nikesh.krishnan | 331d38c | 2023-04-06 03:24:53 +0530 | [diff] [blame] | 17 | #include <cerrno> |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 18 | #include <iostream> |
| 19 | #include <memory> |
| 20 | #include <string> |
| 21 | |
| 22 | #include "Queue.h" |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 23 | #include <sstream> |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 24 | #include <chrono> |
| 25 | #include <thread> |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 26 | #include <bitset> |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 27 | #include <inttypes.h> |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 28 | #include <unistd.h> |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 29 | #include <sys/socket.h> |
| 30 | #include <netinet/in.h> |
| 31 | #include <arpa/inet.h> |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 32 | |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 33 | #include "device.h" |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 34 | #include "core.h" |
Girish Gowdra | ddf9a16 | 2020-01-27 12:56:27 +0530 | [diff] [blame] | 35 | #include "core_data.h" |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 36 | #include "indications.h" |
Nicolas Palpacuer | 0f19b1a | 2018-06-07 17:29:31 -0400 | [diff] [blame] | 37 | #include "stats_collection.h" |
Nicolas Palpacuer | 73222e0 | 2018-07-16 12:20:26 -0400 | [diff] [blame] | 38 | #include "error_format.h" |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 39 | #include "state.h" |
Girish Gowdra | ddf9a16 | 2020-01-27 12:56:27 +0530 | [diff] [blame] | 40 | #include "core_utils.h" |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 41 | |
| 42 | extern "C" |
| 43 | { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 44 | #include <bcmolt_api.h> |
| 45 | #include <bcmolt_host_api.h> |
| 46 | #include <bcmolt_api_model_supporting_enums.h> |
| 47 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 48 | #include <bcmolt_api_conn_mgr.h> |
| 49 | //CLI header files |
| 50 | #include <bcmcli_session.h> |
| 51 | #include <bcmcli.h> |
| 52 | #include <bcm_api_cli.h> |
| 53 | |
| 54 | #include <bcmos_common.h> |
| 55 | #include <bcm_config.h> |
Nicolas Palpacuer | f0b0249 | 2018-09-10 10:21:29 -0400 | [diff] [blame] | 56 | // FIXME : dependency problem |
| 57 | // #include <bcm_common_gpon.h> |
Nicolas Palpacuer | 967438f | 2018-09-07 14:41:54 -0400 | [diff] [blame] | 58 | // #include <bcm_dev_log_task.h> |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 59 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 60 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 61 | static std::string intf_technologies[MAX_SUPPORTED_PON]; |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 62 | static const std::string UNKNOWN_TECH("unknown"); |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 63 | static const std::string MIXED_TECH("mixed"); |
| 64 | static std::string board_technology(UNKNOWN_TECH); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 65 | static std::string chip_family(UNKNOWN_TECH); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 66 | static std::string firmware_version = "Openolt.2019.07.01"; |
Nicolas Palpacuer | dff9679 | 2018-09-06 14:59:32 -0400 | [diff] [blame] | 67 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 68 | static bcmos_errno CreateSched(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, \ |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 69 | uint32_t port_no, uint32_t alloc_id, ::tech_profile::AdditionalBW additional_bw, uint32_t weight, \ |
| 70 | uint32_t priority, ::tech_profile::SchedulingPolicy sched_policy, |
| 71 | ::tech_profile::TrafficShapingInfo traffic_shaping_info, uint32_t tech_profile_id); |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 72 | static bcmos_errno RemoveSched(int intf_id, int onu_id, int uni_id, int alloc_id, std::string direction, int tech_profile_id); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 73 | static bcmos_errno CreateQueue(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, \ |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 74 | bcmolt_egress_qos_type qos_type, uint32_t priority, uint32_t gemport_id, uint32_t tech_profile_id); |
Thiyagarajan Subramani | 8154d93 | 2019-11-13 05:29:06 -0500 | [diff] [blame] | 75 | static bcmos_errno RemoveQueue(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, \ |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 76 | bcmolt_egress_qos_type qos_type, uint32_t priority, uint32_t gemport_id, uint32_t tech_profile_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 77 | static bcmos_errno CreateDefaultSched(uint32_t intf_id, const std::string direction); |
| 78 | static bcmos_errno CreateDefaultQueue(uint32_t intf_id, const std::string direction); |
Orhan Kupusoglu | ec57af0 | 2021-05-12 12:38:17 +0000 | [diff] [blame] | 79 | static const std::chrono::milliseconds ONU_RSSI_COMPLETE_WAIT_TIMEOUT = std::chrono::seconds(10); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 80 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 81 | inline const char *get_flow_acton_command(uint32_t command) { |
| 82 | char actions[200] = { }; |
| 83 | char *s_actions_ptr = actions; |
| 84 | if (command & BCMOLT_ACTION_CMD_ID_ADD_OUTER_TAG) strcat(s_actions_ptr, "ADD_OUTER_TAG|"); |
| 85 | if (command & BCMOLT_ACTION_CMD_ID_REMOVE_OUTER_TAG) strcat(s_actions_ptr, "REMOVE_OUTER_TAG|"); |
| 86 | if (command & BCMOLT_ACTION_CMD_ID_XLATE_OUTER_TAG) strcat(s_actions_ptr, "TRANSLATE_OUTER_TAG|"); |
| 87 | if (command & BCMOLT_ACTION_CMD_ID_ADD_INNER_TAG) strcat(s_actions_ptr, "ADD_INNTER_TAG|"); |
| 88 | if (command & BCMOLT_ACTION_CMD_ID_REMOVE_INNER_TAG) strcat(s_actions_ptr, "REMOVE_INNER_TAG|"); |
| 89 | if (command & BCMOLT_ACTION_CMD_ID_XLATE_INNER_TAG) strcat(s_actions_ptr, "TRANSLATE_INNER_TAG|"); |
| 90 | if (command & BCMOLT_ACTION_CMD_ID_REMARK_OUTER_PBITS) strcat(s_actions_ptr, "REMOVE_OUTER_PBITS|"); |
| 91 | if (command & BCMOLT_ACTION_CMD_ID_REMARK_INNER_PBITS) strcat(s_actions_ptr, "REMAKE_INNER_PBITS|"); |
| 92 | return s_actions_ptr; |
| 93 | } |
| 94 | |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 95 | bcmolt_stat_alarm_config set_stat_alarm_config(const config::OnuItuPonAlarm* request) { |
Jason Huang | 5d9ab1a | 2020-04-15 16:53:49 +0800 | [diff] [blame] | 96 | bcmolt_stat_alarm_config alarm_cfg = {}; |
| 97 | bcmolt_stat_alarm_trigger_config trigger_obj = {}; |
| 98 | bcmolt_stat_alarm_soak_config soak_obj = {}; |
| 99 | |
| 100 | switch (request->alarm_reporting_condition()) { |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 101 | case config::OnuItuPonAlarm::RATE_THRESHOLD: |
Jason Huang | 5d9ab1a | 2020-04-15 16:53:49 +0800 | [diff] [blame] | 102 | trigger_obj.type = BCMOLT_STAT_CONDITION_TYPE_RATE_THRESHOLD; |
| 103 | BCMOLT_FIELD_SET(&trigger_obj.u.rate_threshold, stat_alarm_trigger_config_rate_threshold, |
| 104 | rising, request->rate_threshold_config().rate_threshold_rising()); |
| 105 | BCMOLT_FIELD_SET(&trigger_obj.u.rate_threshold, stat_alarm_trigger_config_rate_threshold, |
| 106 | falling, request->rate_threshold_config().rate_threshold_falling()); |
| 107 | BCMOLT_FIELD_SET(&soak_obj, stat_alarm_soak_config, active_soak_time, |
| 108 | request->rate_threshold_config().soak_time().active_soak_time()); |
| 109 | BCMOLT_FIELD_SET(&soak_obj, stat_alarm_soak_config, clear_soak_time, |
| 110 | request->rate_threshold_config().soak_time().clear_soak_time()); |
| 111 | break; |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 112 | case config::OnuItuPonAlarm::RATE_RANGE: |
Jason Huang | 5d9ab1a | 2020-04-15 16:53:49 +0800 | [diff] [blame] | 113 | trigger_obj.type = BCMOLT_STAT_CONDITION_TYPE_RATE_RANGE; |
| 114 | BCMOLT_FIELD_SET(&trigger_obj.u.rate_range, stat_alarm_trigger_config_rate_range, upper, |
| 115 | request->rate_range_config().rate_range_upper()); |
| 116 | BCMOLT_FIELD_SET(&trigger_obj.u.rate_range, stat_alarm_trigger_config_rate_range, lower, |
| 117 | request->rate_range_config().rate_range_lower()); |
| 118 | BCMOLT_FIELD_SET(&soak_obj, stat_alarm_soak_config, active_soak_time, |
| 119 | request->rate_range_config().soak_time().active_soak_time()); |
| 120 | BCMOLT_FIELD_SET(&soak_obj, stat_alarm_soak_config, clear_soak_time, |
| 121 | request->rate_range_config().soak_time().clear_soak_time()); |
| 122 | break; |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 123 | case config::OnuItuPonAlarm::VALUE_THRESHOLD: |
Jason Huang | 5d9ab1a | 2020-04-15 16:53:49 +0800 | [diff] [blame] | 124 | trigger_obj.type = BCMOLT_STAT_CONDITION_TYPE_VALUE_THRESHOLD; |
| 125 | BCMOLT_FIELD_SET(&trigger_obj.u.value_threshold, stat_alarm_trigger_config_value_threshold, |
| 126 | limit, request->value_threshold_config().threshold_limit()); |
| 127 | BCMOLT_FIELD_SET(&soak_obj, stat_alarm_soak_config, active_soak_time, |
| 128 | request->value_threshold_config().soak_time().active_soak_time()); |
| 129 | BCMOLT_FIELD_SET(&soak_obj, stat_alarm_soak_config, clear_soak_time, |
| 130 | request->value_threshold_config().soak_time().clear_soak_time()); |
| 131 | break; |
| 132 | default: |
| 133 | OPENOLT_LOG(ERROR, openolt_log_id, "unsupported alarm reporting condition = %u\n", request->alarm_reporting_condition()); |
| 134 | // For now just log the error and not return error. We can handle this scenario in the future. |
| 135 | break; |
| 136 | } |
| 137 | |
| 138 | BCMOLT_FIELD_SET(&alarm_cfg, stat_alarm_config, trigger, trigger_obj); |
| 139 | BCMOLT_FIELD_SET(&alarm_cfg, stat_alarm_config, soak, soak_obj); |
| 140 | |
| 141 | return alarm_cfg; |
| 142 | } |
| 143 | |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 144 | Status OnuItuPonAlarmSet_(const config::OnuItuPonAlarm* request) { |
Jason Huang | 5d9ab1a | 2020-04-15 16:53:49 +0800 | [diff] [blame] | 145 | bcmos_errno err; |
| 146 | bcmolt_onu_itu_pon_stats_cfg stat_cfg; /* declare main API struct */ |
| 147 | bcmolt_onu_key key = {}; /* declare key */ |
| 148 | bcmolt_stat_alarm_config errors_cfg = {}; |
| 149 | |
| 150 | key.pon_ni = request->pon_ni(); |
| 151 | key.onu_id = request->onu_id(); |
| 152 | |
| 153 | /* Initialize the API struct. */ |
| 154 | BCMOLT_STAT_CFG_INIT(&stat_cfg, onu, itu_pon_stats, key); |
| 155 | |
| 156 | /* |
| 157 | 1. BCMOLT_STAT_CONDITION_TYPE_NONE = 0, The alarm is disabled. |
| 158 | 2. BCMOLT_STAT_CONDITION_TYPE_RATE_THRESHOLD = 1, The alarm is triggered if the stats delta value between samples |
| 159 | crosses the configured threshold boundary. |
| 160 | rising: The alarm is raised if the stats delta value per second becomes greater than this threshold level. |
| 161 | falling: The alarm is cleared if the stats delta value per second becomes less than this threshold level. |
| 162 | 3. BCMOLT_STAT_CONDITION_TYPE_RATE_RANGE = 2, The alarm is triggered if the stats delta value between samples |
| 163 | deviates from the configured range. |
| 164 | upper: The alarm is raised if the stats delta value per second becomes greater than this upper level. |
| 165 | lower: The alarm is raised if the stats delta value per second becomes less than this lower level. |
| 166 | 4. BCMOLT_STAT_CONDITION_TYPE_VALUE_THRESHOLD = 3, The alarm is raised if the stats sample value becomes greater |
| 167 | than this level. The alarm is cleared when the host read the stats. |
| 168 | limit: The alarm is raised if the stats sample value becomes greater than this level. |
| 169 | The alarm is cleared when the host clears the stats. |
| 170 | |
| 171 | active_soak_time: If the alarm condition is raised and stays in the raised state for at least this amount |
| 172 | of time (unit=seconds), the alarm indication is sent to the host. |
| 173 | The OLT delays the alarm indication no less than this delay period. |
| 174 | It can be delayed more than this period because of the statistics sampling interval. |
| 175 | clear_soak_time: After the alarm is raised, if it is cleared and stays in the cleared state for at least |
| 176 | this amount of time (unit=seconds), the alarm indication is sent to the host. |
| 177 | The OLT delays the alarm indication no less than this delay period. It can be delayed more |
| 178 | than this period because of the statistics sampling interval. |
| 179 | */ |
| 180 | |
| 181 | errors_cfg = set_stat_alarm_config(request); |
| 182 | |
| 183 | switch (request->alarm_id()) { |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 184 | case config::OnuItuPonAlarm_AlarmID::OnuItuPonAlarm_AlarmID_RDI_ERRORS: |
Jason Huang | 5d9ab1a | 2020-04-15 16:53:49 +0800 | [diff] [blame] | 185 | //set the rdi_errors alarm |
| 186 | BCMOLT_FIELD_SET(&stat_cfg.data, onu_itu_pon_stats_cfg_data, rdi_errors, errors_cfg); |
| 187 | break; |
| 188 | default: |
| 189 | OPENOLT_LOG(ERROR, openolt_log_id, "could not find the alarm id %d\n", request->alarm_id()); |
| 190 | return bcm_to_grpc_err(BCM_ERR_PARM, "the alarm id is wrong"); |
| 191 | } |
| 192 | |
| 193 | err = bcmolt_stat_cfg_set(dev_id, &stat_cfg.hdr); |
| 194 | if (err != BCM_ERR_OK) { |
| 195 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to set onu itu pon stats, alarm id %d, pon_ni %d, onu_id %d, err = %s\n", |
| 196 | request->alarm_id(), key.pon_ni, key.onu_id, bcmos_strerror(err)); |
| 197 | return bcm_to_grpc_err(err, "set Onu ITU PON stats alarm faild"); |
| 198 | } else { |
| 199 | OPENOLT_LOG(INFO, openolt_log_id, "set onu itu pon stats alarm %d successfully, pon_ni %d, onu_id %d\n", |
| 200 | request->alarm_id(), key.pon_ni, key.onu_id); |
| 201 | } |
| 202 | |
| 203 | return Status::OK; |
| 204 | } |
| 205 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 206 | Status GetDeviceInfo_(::openolt::DeviceInfo* device_info) { |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 207 | device_info->set_vendor(VENDOR_ID); |
| 208 | device_info->set_model(MODEL_ID); |
Nicolas Palpacuer | dff9679 | 2018-09-06 14:59:32 -0400 | [diff] [blame] | 209 | device_info->set_hardware_version(""); |
| 210 | device_info->set_firmware_version(firmware_version); |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 211 | device_info->set_pon_ports(num_of_pon_ports); |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 212 | |
Thiyagarajan Subramani | 5e97353 | 2019-02-02 03:21:43 -0800 | [diff] [blame] | 213 | char serial_number[OPENOLT_FIELD_LEN]; |
| 214 | memset(serial_number, '\0', OPENOLT_FIELD_LEN); |
| 215 | openolt_read_sysinfo("Serial Number", serial_number); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 216 | OPENOLT_LOG(INFO, openolt_log_id, "Fetched device serial number %s\n", serial_number); |
Thiyagarajan Subramani | 5e97353 | 2019-02-02 03:21:43 -0800 | [diff] [blame] | 217 | device_info->set_device_serial_number(serial_number); |
Burak Gurdag | 30db482 | 2021-03-10 21:30:01 +0000 | [diff] [blame] | 218 | device_info->set_previously_connected(state.previously_connected()); |
Thiyagarajan Subramani | 5e97353 | 2019-02-02 03:21:43 -0800 | [diff] [blame] | 219 | |
Girish Gowdru | 771f9ff | 2019-07-24 12:02:10 -0700 | [diff] [blame] | 220 | char device_id[OPENOLT_FIELD_LEN]; |
| 221 | memset(device_id, '\0', OPENOLT_FIELD_LEN); |
Humera Kouser | 6143c9e | 2020-06-17 22:37:31 +0530 | [diff] [blame] | 222 | |
| 223 | if (grpc_server_interface_name != NULL) { |
| 224 | if (get_intf_mac(grpc_server_interface_name, device_id, sizeof(device_id)) != NULL) |
| 225 | { |
| 226 | OPENOLT_LOG(INFO, openolt_log_id, "Fetched mac address %s of an interface %s\n", device_id, grpc_server_interface_name); |
| 227 | } |
| 228 | else |
| 229 | { |
| 230 | OPENOLT_LOG(ERROR, openolt_log_id, "Mac address of an interface %s is NULL\n", grpc_server_interface_name); |
| 231 | } |
| 232 | } |
| 233 | else |
| 234 | { |
| 235 | openolt_read_sysinfo("MAC", device_id); |
| 236 | OPENOLT_LOG(INFO, openolt_log_id, "Fetched device mac address %s\n", device_id); |
| 237 | } |
| 238 | |
Girish Gowdru | 771f9ff | 2019-07-24 12:02:10 -0700 | [diff] [blame] | 239 | device_info->set_device_id(device_id); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 240 | std::map<std::string, ::openolt::DeviceInfo::DeviceResourceRanges*> ranges; |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 241 | for (uint32_t intf_id = 0; intf_id < num_of_pon_ports; ++intf_id) { |
| 242 | std::string intf_technology = intf_technologies[intf_id]; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 243 | ::openolt::DeviceInfo::DeviceResourceRanges *range = ranges[intf_technology]; |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 244 | if(range == nullptr) { |
| 245 | range = device_info->add_ranges(); |
| 246 | ranges[intf_technology] = range; |
| 247 | range->set_technology(intf_technology); |
| 248 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 249 | ::openolt::DeviceInfo::DeviceResourceRanges::Pool* pool; |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 250 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 251 | pool = range->add_pools(); |
| 252 | pool->set_type(::openolt::DeviceInfo::DeviceResourceRanges::Pool::ONU_ID); |
| 253 | pool->set_sharing(::openolt::DeviceInfo::DeviceResourceRanges::Pool::DEDICATED_PER_INTF); |
| 254 | pool->set_start(ONU_ID_START); |
| 255 | pool->set_end(ONU_ID_END); |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 256 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 257 | pool = range->add_pools(); |
| 258 | pool->set_type(::openolt::DeviceInfo::DeviceResourceRanges::Pool::ALLOC_ID); |
| 259 | pool->set_sharing(::openolt::DeviceInfo::DeviceResourceRanges::Pool::DEDICATED_PER_INTF); |
| 260 | pool->set_start(ALLOC_ID_START); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 261 | pool->set_end(ALLOC_ID_END); |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 262 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 263 | pool = range->add_pools(); |
| 264 | pool->set_type(::openolt::DeviceInfo::DeviceResourceRanges::Pool::GEMPORT_ID); |
| 265 | pool->set_sharing(::openolt::DeviceInfo::DeviceResourceRanges::Pool::DEDICATED_PER_INTF); |
| 266 | pool->set_start(GEM_PORT_ID_START); |
| 267 | pool->set_end(GEM_PORT_ID_END); |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 268 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 269 | pool = range->add_pools(); |
| 270 | pool->set_type(::openolt::DeviceInfo::DeviceResourceRanges::Pool::FLOW_ID); |
| 271 | pool->set_sharing(::openolt::DeviceInfo::DeviceResourceRanges::Pool::SHARED_BY_ALL_INTF_ALL_TECH); |
| 272 | pool->set_start(FLOW_ID_START); |
| 273 | pool->set_end(FLOW_ID_END); |
Craig Lutgen | b2601f0 | 2018-10-23 13:04:31 -0500 | [diff] [blame] | 274 | } |
| 275 | |
| 276 | range->add_intf_ids(intf_id); |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 277 | } |
Nicolas Palpacuer | f0b0249 | 2018-09-10 10:21:29 -0400 | [diff] [blame] | 278 | |
| 279 | // FIXME: Once dependency problem is fixed |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 280 | // device_info->set_pon_ports(num_of_pon_ports); |
Nicolas Palpacuer | f0b0249 | 2018-09-10 10:21:29 -0400 | [diff] [blame] | 281 | // device_info->set_onu_id_end(XGPON_NUM_OF_ONUS - 1); |
| 282 | // device_info->set_alloc_id_start(1024); |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 283 | // device_info->set_alloc_id_end(XGPON_NUM_OF_ALLOC_IDS * num_of_pon_ports ? - 1); |
Nicolas Palpacuer | f0b0249 | 2018-09-10 10:21:29 -0400 | [diff] [blame] | 284 | // device_info->set_gemport_id_start(XGPON_MIN_BASE_SERVICE_PORT_ID); |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 285 | // device_info->set_gemport_id_end(XGPON_NUM_OF_GEM_PORT_IDS_PER_PON * num_of_pon_ports ? - 1); |
| 286 | // device_info->set_pon_ports(num_of_pon_ports); |
Nicolas Palpacuer | dff9679 | 2018-09-06 14:59:32 -0400 | [diff] [blame] | 287 | |
| 288 | return Status::OK; |
| 289 | } |
| 290 | |
Thiyagarajan Subramani | 3e8bfd9 | 2021-04-26 15:07:14 +0530 | [diff] [blame] | 291 | void reset_pon_device(bcmolt_odid dev) |
| 292 | { |
| 293 | bcmos_errno err; |
| 294 | bcmolt_device_reset oper; |
| 295 | bcmolt_device_key key = {.device_id = dev}; |
| 296 | |
| 297 | OPENOLT_LOG(INFO, openolt_log_id, "Reset PON device: %d\n", dev); |
| 298 | |
| 299 | BCMOLT_OPER_INIT(&oper, device, reset, key); |
| 300 | err = bcmolt_oper_submit(dev_id, &oper.hdr); |
| 301 | if (err) |
| 302 | { |
| 303 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to reset PON device(%d) failed, err = %s\n", dev, bcmos_strerror(err)); |
| 304 | }else |
| 305 | { |
| 306 | OPENOLT_LOG(INFO, openolt_log_id, "Reset PON device(%d) success\n", dev); |
| 307 | } |
| 308 | } |
| 309 | |
Shad Ansari | 627b578 | 2018-08-13 22:49:32 +0000 | [diff] [blame] | 310 | Status Enable_(int argc, char *argv[]) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 311 | bcmos_errno err; |
| 312 | bcmolt_host_init_parms init_parms = {}; |
| 313 | init_parms.transport.type = BCM_HOST_API_CONN_LOCAL; |
| 314 | unsigned int failed_enable_device_cnt = 0; |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 315 | |
Shad Ansari | edef213 | 2018-08-10 22:14:50 +0000 | [diff] [blame] | 316 | if (!state.is_activated()) { |
Shad Ansari | 627b578 | 2018-08-13 22:49:32 +0000 | [diff] [blame] | 317 | |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 318 | vendor_init(); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 319 | /* Initialize host subsystem */ |
| 320 | err = bcmolt_host_init(&init_parms); |
| 321 | if (BCM_ERR_OK != err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 322 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to init OLT, err = %s\n",bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 323 | return bcm_to_grpc_err(err, "Failed to init OLT"); |
| 324 | } |
| 325 | |
| 326 | bcmcli_session_parm mon_session_parm; |
| 327 | /* Create CLI session */ |
| 328 | memset(&mon_session_parm, 0, sizeof(mon_session_parm)); |
| 329 | mon_session_parm.get_prompt = openolt_cli_get_prompt_cb; |
| 330 | mon_session_parm.access_right = BCMCLI_ACCESS_ADMIN; |
| 331 | bcmos_errno rc = bcmcli_session_open(&mon_session_parm, ¤t_session); |
| 332 | BUG_ON(rc != BCM_ERR_OK); |
| 333 | |
| 334 | /* API CLI */ |
| 335 | bcm_openolt_api_cli_init(NULL, current_session); |
| 336 | |
| 337 | /* Add quit command */ |
| 338 | BCMCLI_MAKE_CMD_NOPARM(NULL, "quit", "Quit", bcm_cli_quit); |
| 339 | |
| 340 | err = bcmolt_apiend_cli_init(); |
| 341 | if (BCM_ERR_OK != err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 342 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to add apiend init, err = %s\n",bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 343 | return bcm_to_grpc_err(err, "Failed to add apiend init"); |
| 344 | } |
| 345 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 346 | bcmos_fastlock_init(&data_lock, 0); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 347 | bcmos_fastlock_init(&acl_id_bitset_lock, 0); |
| 348 | bcmos_fastlock_init(&tm_sched_bitset_lock, 0); |
| 349 | bcmos_fastlock_init(&tm_qmp_bitset_lock, 0); |
| 350 | bcmos_fastlock_init(&flow_id_bitset_lock, 0); |
| 351 | bcmos_fastlock_init(&voltha_flow_to_device_flow_lock, 0); |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 352 | bcmos_fastlock_init(&alloc_cfg_wait_lock, 0); |
Thiyagarajan Subramani | e976fcf | 2021-05-07 22:46:57 +0530 | [diff] [blame] | 353 | bcmos_fastlock_init(&gem_cfg_wait_lock, 0); |
Girish Gowdra | 7a79dae | 2020-02-10 18:22:11 +0530 | [diff] [blame] | 354 | bcmos_fastlock_init(&onu_deactivate_wait_lock, 0); |
Girish Gowdra | 1935e6a | 2020-10-31 21:48:22 -0700 | [diff] [blame] | 355 | bcmos_fastlock_init(&acl_packet_trap_handler_lock, 0); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 356 | bcmos_fastlock_init(&symmetric_datapath_flow_id_lock, 0); |
| 357 | bcmos_fastlock_init(&pon_gem_to_onu_uni_map_lock, 0); |
| 358 | |
Girish Gowdra | 1935e6a | 2020-10-31 21:48:22 -0700 | [diff] [blame] | 359 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 360 | OPENOLT_LOG(INFO, openolt_log_id, "Enable OLT - %s-%s\n", VENDOR_ID, MODEL_ID); |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 361 | |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 362 | //check BCM daemon is connected or not |
| 363 | Status status = check_connection(); |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 364 | if (!status.ok()) { |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 365 | return status; |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 366 | } |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 367 | else { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 368 | Status status = SubscribeIndication(); |
| 369 | if (!status.ok()) { |
| 370 | OPENOLT_LOG(ERROR, openolt_log_id, "SubscribeIndication failed - %s : %s\n", |
| 371 | grpc_status_code_to_string(status.error_code()).c_str(), |
| 372 | status.error_message().c_str()); |
| 373 | return status; |
| 374 | } |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 375 | |
| 376 | //check BAL state in initial stage |
| 377 | status = check_bal_ready(); |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 378 | if (!status.ok()) { |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 379 | return status; |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 380 | } |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 381 | } |
| 382 | |
| 383 | { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 384 | bcmos_errno err; |
| 385 | bcmolt_odid dev; |
| 386 | OPENOLT_LOG(INFO, openolt_log_id, "Enabling PON %d Devices ... \n", BCM_MAX_DEVS_PER_LINE_CARD); |
| 387 | for (dev = 0; dev < BCM_MAX_DEVS_PER_LINE_CARD; dev++) { |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 388 | bcmolt_device_cfg dev_cfg = { }; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 389 | bcmolt_device_key dev_key = { }; |
| 390 | dev_key.device_id = dev; |
| 391 | BCMOLT_CFG_INIT(&dev_cfg, device, dev_key); |
| 392 | BCMOLT_MSG_FIELD_GET(&dev_cfg, system_mode); |
Thiyagarajan Subramani | 4e62e17 | 2021-06-25 17:31:30 +0530 | [diff] [blame] | 393 | |
Girish Gowdra | b0337eb | 2022-03-25 16:44:21 -0700 | [diff] [blame] | 394 | /* FIXME: Single Phoenix BAL patch is prepared for all three variants of Radisys OLT |
| 395 | * in which BCM_MAX_DEVS_PER_LINE_CARD macro need to be redefined as 1 incase of |
| 396 | * "rlt-1600g-w" and "rlt-1600x-w", till then this workaround is required.*/ |
Thiyagarajan Subramani | 4e62e17 | 2021-06-25 17:31:30 +0530 | [diff] [blame] | 397 | if (dev == 1 && (MODEL_ID == "rlt-1600g-w" || MODEL_ID == "rlt-1600x-w")) { |
Girish Gowdra | b0337eb | 2022-03-25 16:44:21 -0700 | [diff] [blame] | 398 | continue; |
| 399 | } |
Thiyagarajan Subramani | 4e62e17 | 2021-06-25 17:31:30 +0530 | [diff] [blame] | 400 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 401 | err = bcmolt_cfg_get(dev_id, &dev_cfg.hdr); |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 402 | if (err == BCM_ERR_NOT_CONNECTED) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 403 | bcmolt_device_key key = {.device_id = dev}; |
| 404 | bcmolt_device_connect oper; |
| 405 | BCMOLT_OPER_INIT(&oper, device, connect, key); |
Thiyagarajan Subramani | 3e8bfd9 | 2021-04-26 15:07:14 +0530 | [diff] [blame] | 406 | |
Girish Gowdra | b0337eb | 2022-03-25 16:44:21 -0700 | [diff] [blame] | 407 | /* BAL saves current state into dram_tune soc file and when dev_mgmt_daemon restarts |
| 408 | * it retains config from soc file. If openolt agent try to connect device without |
| 409 | * device reset device initialization fails hence doing device reset here. */ |
Thiyagarajan Subramani | 3e8bfd9 | 2021-04-26 15:07:14 +0530 | [diff] [blame] | 410 | reset_pon_device(dev); |
Girish Gowdra | b0337eb | 2022-03-25 16:44:21 -0700 | [diff] [blame] | 411 | bcmolt_system_mode sm; |
| 412 | #ifdef DYNAMIC_PON_TRX_SUPPORT |
| 413 | auto sm_res = ponTrx.get_mac_system_mode(dev, ponTrx.get_sfp_presence_data()); |
| 414 | if (!sm_res.second) { |
| 415 | OPENOLT_LOG(ERROR, openolt_log_id, "could not read mac system mode. dev_id = %d\n", dev); |
| 416 | continue; |
| 417 | } |
| 418 | sm = sm_res.first; |
| 419 | #else |
| 420 | sm = DEFAULT_MAC_SYSTEM_MODE; |
| 421 | #endif |
| 422 | BCMOLT_MSG_FIELD_SET (&oper, system_mode, sm); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 423 | if (MODEL_ID == "asfvolt16") { |
| 424 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 425 | } else if (MODEL_ID == "asgvolt64") { |
| 426 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI); |
| 427 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_FOUR_TO_ONE); |
Thiyagarajan Subramani | 4e62e17 | 2021-06-25 17:31:30 +0530 | [diff] [blame] | 428 | } else if (MODEL_ID == "rlt-3200g-w" || MODEL_ID == "rlt-1600g-w") { |
Thiyagarajan Subramani | 3e8bfd9 | 2021-04-26 15:07:14 +0530 | [diff] [blame] | 429 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_NONE); |
| 430 | if(dev == 1) { |
| 431 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_FOUR_TO_ONE); |
| 432 | } |
| 433 | BCMOLT_MSG_FIELD_SET (&oper, ras_ddr_mode, BCMOLT_RAS_DDR_USAGE_MODE_TWO_DDRS); |
| 434 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI); |
Thiyagarajan Subramani | 4e62e17 | 2021-06-25 17:31:30 +0530 | [diff] [blame] | 435 | } else if (MODEL_ID == "rlt-1600x-w") { |
| 436 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_NONE); |
| 437 | BCMOLT_MSG_FIELD_SET (&oper, ras_ddr_mode, BCMOLT_RAS_DDR_USAGE_MODE_TWO_DDRS); |
| 438 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_10_G_XFI); |
Arthur Syu | 094df16 | 2022-04-21 17:50:06 +0800 | [diff] [blame] | 439 | } else if (MODEL_ID == "sda3016ss") { |
| 440 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mode, BCMOLT_INNI_MODE_ALL_12_P_5_G); |
| 441 | BCMOLT_MSG_FIELD_SET(&oper, inni_config.mux, BCMOLT_INNI_MUX_TWO_TO_ONE); |
| 442 | BCMOLT_MSG_FIELD_SET (&oper, ras_ddr_mode, BCMOLT_RAS_DDR_USAGE_MODE_TWO_DDRS); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 443 | } |
| 444 | err = bcmolt_oper_submit(dev_id, &oper.hdr); |
| 445 | if (err) { |
| 446 | failed_enable_device_cnt ++; |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 447 | OPENOLT_LOG(ERROR, openolt_log_id, "Enable PON device %d failed, err = %s\n", dev, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 448 | if (failed_enable_device_cnt == BCM_MAX_DEVS_PER_LINE_CARD) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 449 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to enable all the pon ports, err = %s\n", bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 450 | return Status(grpc::StatusCode::INTERNAL, "Failed to activate all PON ports"); |
| 451 | } |
| 452 | } |
Girish Gowdra | 72bb465 | 2022-01-18 17:04:30 -0800 | [diff] [blame] | 453 | bcmos_usleep(MAC_DEVICE_ACTIVATION_DELAY); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 454 | } |
| 455 | else { |
Thiyagarajan Subramani | 4e62e17 | 2021-06-25 17:31:30 +0530 | [diff] [blame] | 456 | OPENOLT_LOG(WARNING, openolt_log_id, "PON device %d already connected\n", dev); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 457 | state.activate(); |
| 458 | } |
| 459 | } |
| 460 | init_stats(); |
Shad Ansari | 627b578 | 2018-08-13 22:49:32 +0000 | [diff] [blame] | 461 | } |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 462 | } |
Shad Ansari | edef213 | 2018-08-10 22:14:50 +0000 | [diff] [blame] | 463 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 464 | /* Start CLI */ |
| 465 | OPENOLT_LOG(INFO, def_log_id, "Starting CLI\n"); |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 466 | //If already enabled, generate an extra indication ???? |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 467 | return Status::OK; |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 468 | } |
| 469 | |
| 470 | Status Disable_() { |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 471 | //In the earlier implementation Disabling olt is done by disabling the NNI port associated with that. |
| 472 | //In inband scenario instead of using management interface to establish connection with adapter ,NNI interface will be used. |
| 473 | //Disabling NNI port on olt disable causes connection loss between adapter and agent. |
| 474 | //To overcome this disable is implemented by disabling all the PON ports |
| 475 | //associated with the device so as to support both in-band |
| 476 | //and out of band scenarios. |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 477 | |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 478 | Status status; |
| 479 | int failedCount = 0; |
Girish Gowdra | e1db295 | 2021-05-04 00:16:54 -0700 | [diff] [blame] | 480 | OPENOLT_LOG(INFO, openolt_log_id, "Received disable OLT\n"); |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 481 | for (int i = 0; i < NumPonIf_(); i++) { |
| 482 | status = DisablePonIf_(i); |
| 483 | if (!status.ok()) { |
| 484 | failedCount+=1; |
| 485 | BCM_LOG(ERROR, openolt_log_id, "Failed to disable PON interface: %d\n", i); |
| 486 | } |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 487 | } |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 488 | if (failedCount == 0) { |
| 489 | state.deactivate(); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 490 | ::openolt::Indication ind; |
| 491 | ::openolt::OltIndication* olt_ind = new ::openolt::OltIndication; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 492 | olt_ind->set_oper_state("down"); |
| 493 | ind.set_allocated_olt_ind(olt_ind); |
| 494 | BCM_LOG(INFO, openolt_log_id, "Disable OLT, add an extra indication\n"); |
| 495 | oltIndQ.push(ind); |
| 496 | return Status::OK; |
| 497 | } |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 498 | if (failedCount ==NumPonIf_()) { |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 499 | return grpc::Status(grpc::StatusCode::INTERNAL, "failed to disable olt ,all the PON ports are still in enabled state"); |
| 500 | } |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 501 | |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 502 | return grpc::Status(grpc::StatusCode::UNKNOWN, "failed to disable olt ,few PON ports are still in enabled state"); |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 503 | } |
| 504 | |
| 505 | Status Reenable_() { |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 506 | Status status; |
| 507 | int failedCount = 0; |
| 508 | for (int i = 0; i < NumPonIf_(); i++) { |
| 509 | status = EnablePonIf_(i); |
| 510 | if (!status.ok()) { |
| 511 | failedCount+=1; |
| 512 | BCM_LOG(ERROR, openolt_log_id, "Failed to enable PON interface: %d\n", i); |
| 513 | } |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 514 | } |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 515 | if (failedCount == 0) { |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 516 | state.activate(); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 517 | ::openolt::Indication ind; |
| 518 | ::openolt::OltIndication* olt_ind = new ::openolt::OltIndication; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 519 | olt_ind->set_oper_state("up"); |
| 520 | ind.set_allocated_olt_ind(olt_ind); |
| 521 | BCM_LOG(INFO, openolt_log_id, "Reenable OLT, add an extra indication\n"); |
| 522 | oltIndQ.push(ind); |
| 523 | return Status::OK; |
| 524 | } |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 525 | if (failedCount ==NumPonIf_()) { |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 526 | return grpc::Status(grpc::StatusCode::INTERNAL, "failed to re-enable olt ,all the PON ports are still in disabled state"); |
| 527 | } |
| 528 | return grpc::Status(grpc::StatusCode::UNKNOWN, "failed to re-enable olt ,few PON ports are still in disabled state"); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 529 | } |
| 530 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 531 | inline uint64_t get_flow_status(uint16_t flow_id, uint16_t flow_type, uint16_t data_id) { |
| 532 | bcmos_errno err; |
| 533 | bcmolt_flow_key flow_key; |
| 534 | bcmolt_flow_cfg flow_cfg; |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 535 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 536 | flow_key.flow_id = flow_id; |
| 537 | flow_key.flow_type = (bcmolt_flow_type)flow_type; |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 538 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 539 | BCMOLT_CFG_INIT(&flow_cfg, flow, flow_key); |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 540 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 541 | switch (data_id) { |
| 542 | case ONU_ID: //onu_id |
| 543 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, onu_id); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 544 | #ifdef TEST_MODE |
| 545 | // It is impossible to mock the setting of flow_cfg.data.state because |
| 546 | // the actual bcmolt_cfg_get passes the address of flow_cfg.hdr and we cannot |
| 547 | // set the flow_cfg.data. So a new stub function is created and address |
| 548 | // of flow_cfg is passed. This is one-of case where we need to add test specific |
| 549 | // code in production code. |
| 550 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 551 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 552 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 553 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 554 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 555 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get onu_id, err = %s (%d)\n", flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 556 | return err; |
| 557 | } |
| 558 | return flow_cfg.data.onu_id; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 559 | case FLOW_TYPE: |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 560 | #ifdef TEST_MODE |
| 561 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 562 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 563 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 564 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 565 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 566 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get flow_type, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 567 | return err; |
| 568 | } |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 569 | return flow_cfg.key.flow_type; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 570 | case SVC_PORT_ID: //svc_port_id |
| 571 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, svc_port_id); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 572 | #ifdef TEST_MODE |
| 573 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 574 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 575 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 576 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 577 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 578 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get svc_port_id, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 579 | return err; |
| 580 | } |
| 581 | return flow_cfg.data.svc_port_id; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 582 | case PRIORITY: |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 583 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, priority); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 584 | #ifdef TEST_MODE |
| 585 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 586 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 587 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 588 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 589 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 590 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get priority, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 591 | return err; |
| 592 | } |
| 593 | return flow_cfg.data.priority; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 594 | case COOKIE: //cookie |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 595 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, cookie); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 596 | #ifdef TEST_MODE |
| 597 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 598 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 599 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 600 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 601 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 602 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get cookie, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 603 | return err; |
| 604 | } |
| 605 | return flow_cfg.data.cookie; |
| 606 | case INGRESS_INTF_TYPE: //ingress intf_type |
| 607 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, ingress_intf); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 608 | #ifdef TEST_MODE |
| 609 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 610 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 611 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 612 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 613 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 614 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get ingress intf_type, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 615 | return err; |
| 616 | } |
| 617 | return flow_cfg.data.ingress_intf.intf_type; |
| 618 | case EGRESS_INTF_TYPE: //egress intf_type |
| 619 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_intf); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 620 | #ifdef TEST_MODE |
| 621 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 622 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 623 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 624 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 625 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 626 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress intf_type, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 627 | return err; |
| 628 | } |
| 629 | return flow_cfg.data.egress_intf.intf_type; |
| 630 | case INGRESS_INTF_ID: //ingress intf_id |
| 631 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, ingress_intf); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 632 | #ifdef TEST_MODE |
| 633 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 634 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 635 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 636 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 637 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 638 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get ingress intf_id, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 639 | return err; |
| 640 | } |
| 641 | return flow_cfg.data.ingress_intf.intf_id; |
| 642 | case EGRESS_INTF_ID: //egress intf_id |
| 643 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_intf); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 644 | #ifdef TEST_MODE |
| 645 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 646 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 647 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 648 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 649 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 650 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress intf_id, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 651 | return err; |
| 652 | } |
| 653 | return flow_cfg.data.egress_intf.intf_id; |
| 654 | case CLASSIFIER_O_VID: |
| 655 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 656 | #ifdef TEST_MODE |
| 657 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 658 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 659 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 660 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 661 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 662 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier o_vid, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 663 | return err; |
| 664 | } |
| 665 | return flow_cfg.data.classifier.o_vid; |
| 666 | case CLASSIFIER_O_PBITS: |
| 667 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 668 | #ifdef TEST_MODE |
| 669 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 670 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 671 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 672 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 673 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 674 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier o_pbits, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 675 | return err; |
| 676 | } |
| 677 | return flow_cfg.data.classifier.o_pbits; |
| 678 | case CLASSIFIER_I_VID: |
| 679 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 680 | #ifdef TEST_MODE |
| 681 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 682 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 683 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 684 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 685 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 686 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier i_vid, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 687 | return err; |
| 688 | } |
| 689 | return flow_cfg.data.classifier.i_vid; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 690 | case CLASSIFIER_I_PBITS: |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 691 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 692 | #ifdef TEST_MODE |
| 693 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 694 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 695 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 696 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 697 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 698 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier i_pbits, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 699 | return err; |
| 700 | } |
| 701 | return flow_cfg.data.classifier.i_pbits; |
| 702 | case CLASSIFIER_ETHER_TYPE: |
| 703 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 704 | #ifdef TEST_MODE |
| 705 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 706 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 707 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 708 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 709 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 710 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier ether_type, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 711 | return err; |
| 712 | } |
| 713 | return flow_cfg.data.classifier.ether_type; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 714 | case CLASSIFIER_IP_PROTO: |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 715 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 716 | #ifdef TEST_MODE |
| 717 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 718 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 719 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 720 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 721 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 722 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier ip_proto, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 723 | return err; |
| 724 | } |
| 725 | return flow_cfg.data.classifier.ip_proto; |
| 726 | case CLASSIFIER_SRC_PORT: |
| 727 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 728 | #ifdef TEST_MODE |
| 729 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 730 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 731 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 732 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 733 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 734 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier src_port, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 735 | return err; |
| 736 | } |
| 737 | return flow_cfg.data.classifier.src_port; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 738 | case CLASSIFIER_DST_PORT: |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 739 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 740 | #ifdef TEST_MODE |
| 741 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 742 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 743 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 744 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 745 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 746 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier dst_port, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 747 | return err; |
| 748 | } |
| 749 | return flow_cfg.data.classifier.dst_port; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 750 | case CLASSIFIER_PKT_TAG_TYPE: |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 751 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, classifier); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 752 | #ifdef TEST_MODE |
| 753 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 754 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 755 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 756 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 757 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 758 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get classifier pkt_tag_type, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 759 | return err; |
| 760 | } |
| 761 | return flow_cfg.data.classifier.pkt_tag_type; |
| 762 | case EGRESS_QOS_TYPE: |
| 763 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_qos); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 764 | #ifdef TEST_MODE |
| 765 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 766 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 767 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 768 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 769 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 770 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress_qos type, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 771 | return err; |
| 772 | } |
| 773 | return flow_cfg.data.egress_qos.type; |
| 774 | case EGRESS_QOS_QUEUE_ID: |
| 775 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_qos); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 776 | #ifdef TEST_MODE |
| 777 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 778 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 779 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 780 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 781 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 782 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress_qos queue_id, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 783 | return err; |
| 784 | } |
| 785 | switch (flow_cfg.data.egress_qos.type) { |
| 786 | case BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE: |
| 787 | return flow_cfg.data.egress_qos.u.fixed_queue.queue_id; |
| 788 | case BCMOLT_EGRESS_QOS_TYPE_TC_TO_QUEUE: |
| 789 | return flow_cfg.data.egress_qos.u.tc_to_queue.tc_to_queue_id; |
| 790 | case BCMOLT_EGRESS_QOS_TYPE_PBIT_TO_TC: |
| 791 | return flow_cfg.data.egress_qos.u.pbit_to_tc.tc_to_queue_id; |
| 792 | case BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE: |
| 793 | return flow_cfg.data.egress_qos.u.priority_to_queue.tm_q_set_id; |
| 794 | case BCMOLT_EGRESS_QOS_TYPE_NONE: |
| 795 | default: |
| 796 | return -1; |
| 797 | } |
| 798 | case EGRESS_QOS_TM_SCHED_ID: |
| 799 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, egress_qos); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 800 | #ifdef TEST_MODE |
| 801 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 802 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 803 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 804 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 805 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 806 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get egress_qos tm_sched_id, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 807 | return err; |
| 808 | } |
| 809 | return flow_cfg.data.egress_qos.tm_sched.id; |
| 810 | case ACTION_CMDS_BITMASK: |
| 811 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 812 | #ifdef TEST_MODE |
| 813 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 814 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 815 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 816 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 817 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 818 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action cmds_bitmask, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 819 | return err; |
| 820 | } |
| 821 | return flow_cfg.data.action.cmds_bitmask; |
| 822 | case ACTION_O_VID: |
| 823 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 824 | #ifdef TEST_MODE |
| 825 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 826 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 827 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 828 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 829 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 830 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action o_vid, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 831 | return err; |
| 832 | } |
| 833 | return flow_cfg.data.action.o_vid; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 834 | case ACTION_O_PBITS: |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 835 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 836 | #ifdef TEST_MODE |
| 837 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 838 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 839 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 840 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 841 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 842 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action o_pbits, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 843 | return err; |
| 844 | } |
| 845 | return flow_cfg.data.action.o_pbits; |
| 846 | case ACTION_I_VID: |
| 847 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 848 | #ifdef TEST_MODE |
| 849 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 850 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 851 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 852 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 853 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 854 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action i_vid, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 855 | return err; |
| 856 | } |
| 857 | return flow_cfg.data.action.i_vid; |
| 858 | case ACTION_I_PBITS: |
| 859 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, action); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 860 | #ifdef TEST_MODE |
| 861 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 862 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 863 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 864 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 865 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 866 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get action i_pbits, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 867 | return err; |
| 868 | } |
| 869 | return flow_cfg.data.action.i_pbits; |
| 870 | case STATE: |
| 871 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, state); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 872 | #ifdef TEST_MODE |
| 873 | err = bcmolt_cfg_get__flow_stub(dev_id, &flow_cfg); |
| 874 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 875 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 876 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 877 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 878 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get state, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 879 | return err; |
| 880 | } |
| 881 | return flow_cfg.data.state; |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 882 | case GROUP_ID: |
| 883 | BCMOLT_FIELD_SET_PRESENT(&flow_cfg.data, flow_cfg_data, group_id); |
| 884 | err = bcmolt_cfg_get(dev_id, &flow_cfg.hdr); |
| 885 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 886 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to get group_id, err = %s (%d)\n",flow_cfg.hdr.hdr.err_text, err); |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 887 | return err; |
| 888 | } |
| 889 | return flow_cfg.data.group_id; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 890 | default: |
| 891 | return BCM_ERR_INTERNAL; |
| 892 | } |
| 893 | |
| 894 | return err; |
| 895 | } |
| 896 | |
| 897 | Status EnablePonIf_(uint32_t intf_id) { |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 898 | bcmos_errno err = BCM_ERR_OK; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 899 | bcmolt_pon_interface_cfg interface_obj; |
| 900 | bcmolt_pon_interface_key intf_key = {.pon_ni = (bcmolt_interface)intf_id}; |
| 901 | bcmolt_pon_interface_set_pon_interface_state pon_interface_set_state; |
| 902 | bcmolt_interface_state state; |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 903 | bcmolt_status los_status; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 904 | |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 905 | err = get_pon_interface_status((bcmolt_interface)intf_id, &state, &los_status); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 906 | if (err == BCM_ERR_OK) { |
| 907 | if (state == BCMOLT_INTERFACE_STATE_ACTIVE_WORKING) { |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 908 | OPENOLT_LOG(WARNING, openolt_log_id, "PON interface: %d already enabled\n", intf_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 909 | return Status::OK; |
| 910 | } |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 911 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 912 | BCMOLT_CFG_INIT(&interface_obj, pon_interface, intf_key); |
| 913 | BCMOLT_OPER_INIT(&pon_interface_set_state, pon_interface, set_pon_interface_state, intf_key); |
| 914 | BCMOLT_MSG_FIELD_SET(&interface_obj, discovery.control, BCMOLT_CONTROL_STATE_ENABLE); |
| 915 | BCMOLT_MSG_FIELD_SET(&interface_obj, discovery.interval, 5000); |
| 916 | BCMOLT_MSG_FIELD_SET(&interface_obj, discovery.onu_post_discovery_mode, |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 917 | BCMOLT_ONU_POST_DISCOVERY_MODE_NONE); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 918 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.los, true); |
| 919 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.onu_alarms, true); |
| 920 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.tiwi, true); |
| 921 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.ack_timeout, true); |
| 922 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.sfi, true); |
| 923 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.automatic_onu_deactivation.loki, true); |
Burak Gurdag | 5e58779 | 2020-05-06 14:58:02 +0000 | [diff] [blame] | 924 | |
| 925 | // On GPON, power level mode is not set to its default value (i.e. 0) as documented in Broadcom documentation. |
| 926 | // Instead, it is set to 2 which means -6 dbM attenuation. Therefore, we explicitly set it to the default value below. |
Arthur Syu | 094df16 | 2022-04-21 17:50:06 +0800 | [diff] [blame] | 927 | std::string intf_technology = intf_technologies[intf_id]; |
| 928 | if (intf_technology == "GPON") { |
Burak Gurdag | 5e58779 | 2020-05-06 14:58:02 +0000 | [diff] [blame] | 929 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.gpon.power_level.pls_maximum_allocation_size, BCMOLT_PON_POWER_LEVEL_PLS_MAXIMUM_ALLOCATION_SIZE_DEFAULT); |
| 930 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.gpon.power_level.mode, BCMOLT_PON_POWER_LEVEL_MODE_DEFAULT); |
| 931 | } |
| 932 | |
Girish Gowdra | b0337eb | 2022-03-25 16:44:21 -0700 | [diff] [blame] | 933 | // TODO: Currently the PON Type is set automatically when the MAC System Mode is set. But it could be explicitely set here again. |
| 934 | // The data for the PON type is availabe in the PonTrx object (check trx_data) |
| 935 | |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 936 | //Enable AES Encryption |
| 937 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.onu_activation.key_exchange, BCMOLT_CONTROL_STATE_ENABLE); |
| 938 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.onu_activation.authentication, BCMOLT_CONTROL_STATE_ENABLE); |
| 939 | BCMOLT_MSG_FIELD_SET(&interface_obj, itu.onu_activation.fail_due_to_authentication_failure, BCMOLT_CONTROL_STATE_ENABLE); |
| 940 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 941 | BCMOLT_FIELD_SET(&pon_interface_set_state.data, pon_interface_set_pon_interface_state_data, |
| 942 | operation, BCMOLT_INTERFACE_OPERATION_ACTIVE_WORKING); |
| 943 | |
| 944 | err = bcmolt_cfg_set(dev_id, &interface_obj.hdr); |
| 945 | if (err != BCM_ERR_OK) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 946 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to enable discovery onu, PON interface %d, err = %s\n", intf_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 947 | return bcm_to_grpc_err(err, "Failed to enable discovery onu"); |
| 948 | } |
| 949 | err = bcmolt_oper_submit(dev_id, &pon_interface_set_state.hdr); |
| 950 | if (err != BCM_ERR_OK) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 951 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to enable PON interface: %d, err = %s\n", intf_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 952 | return bcm_to_grpc_err(err, "Failed to enable PON interface"); |
| 953 | } |
| 954 | else { |
| 955 | OPENOLT_LOG(INFO, openolt_log_id, "Successfully enabled PON interface: %d\n", intf_id); |
| 956 | OPENOLT_LOG(INFO, openolt_log_id, "Initializing tm sched creation for PON interface: %d\n", intf_id); |
| 957 | CreateDefaultSched(intf_id, downstream); |
| 958 | CreateDefaultQueue(intf_id, downstream); |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 959 | } |
| 960 | |
| 961 | return Status::OK; |
| 962 | } |
| 963 | |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 964 | Status ProbeDeviceCapabilities_() { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 965 | bcmos_errno err; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 966 | bcmolt_device_cfg dev_cfg = { }; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 967 | bcmolt_device_key dev_key = { }; |
| 968 | bcmolt_olt_cfg olt_cfg = { }; |
| 969 | bcmolt_olt_key olt_key = { }; |
| 970 | bcmolt_topology_map topo_map[BCM_MAX_PONS_PER_OLT] = { }; |
| 971 | bcmolt_topology topo = { }; |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 972 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 973 | topo.topology_maps.len = BCM_MAX_PONS_PER_OLT; |
| 974 | topo.topology_maps.arr = &topo_map[0]; |
| 975 | BCMOLT_CFG_INIT(&olt_cfg, olt, olt_key); |
| 976 | BCMOLT_MSG_FIELD_GET(&olt_cfg, bal_state); |
| 977 | BCMOLT_FIELD_SET_PRESENT(&olt_cfg.data, olt_cfg_data, topology); |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 978 | BCMOLT_CFG_LIST_BUF_SET(&olt_cfg, olt, topo.topology_maps.arr, |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 979 | sizeof(bcmolt_topology_map) * topo.topology_maps.len); |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 980 | #ifdef TEST_MODE |
| 981 | // It is impossible to mock the setting of olt_cfg.data.bal_state because |
| 982 | // the actual bcmolt_cfg_get passes the address of olt_cfg.hdr and we cannot |
| 983 | // set the olt_cfg.data.topology. So a new stub function is created and address |
| 984 | // of olt_cfg is passed. This is one-of case where we need to test add specific |
| 985 | // code in production code. |
| 986 | err = bcmolt_cfg_get__olt_topology_stub(dev_id, &olt_cfg); |
| 987 | #else |
Amit Ghosh | fcad4d3 | 2019-11-13 10:24:55 +0000 | [diff] [blame] | 988 | err = bcmolt_cfg_get_mult_retry(dev_id, &olt_cfg.hdr); |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 989 | #endif |
| 990 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 991 | OPENOLT_LOG(ERROR, openolt_log_id, "cfg: Failed to query OLT topology, err = %s\n", bcmos_strerror(err)); |
Amit Ghosh | fcad4d3 | 2019-11-13 10:24:55 +0000 | [diff] [blame] | 992 | return bcm_to_grpc_err(err, "cfg: Failed to query OLT topology"); |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 993 | } |
| 994 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 995 | num_of_nni_ports = olt_cfg.data.topology.num_switch_ports; |
| 996 | num_of_pon_ports = olt_cfg.data.topology.topology_maps.len; |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 997 | |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 998 | OPENOLT_LOG(INFO, openolt_log_id, "OLT capabilitites, oper_state: %s\n", |
| 999 | olt_cfg.data.bal_state == BCMOLT_BAL_STATE_BAL_AND_SWITCH_READY |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1000 | ? "up" : "down"); |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 1001 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1002 | OPENOLT_LOG(INFO, openolt_log_id, "topology nni: %d pon: %d dev: %d\n", |
| 1003 | num_of_nni_ports, |
| 1004 | num_of_pon_ports, |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 1005 | BCM_MAX_DEVS_PER_LINE_CARD); |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 1006 | |
Amit Ghosh | fcad4d3 | 2019-11-13 10:24:55 +0000 | [diff] [blame] | 1007 | uint32_t num_failed_cfg_gets = 0; |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1008 | static std::string openolt_version = firmware_version; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1009 | for (int devid = 0; devid < BCM_MAX_DEVS_PER_LINE_CARD; devid++) { |
| 1010 | dev_key.device_id = devid; |
| 1011 | BCMOLT_CFG_INIT(&dev_cfg, device, dev_key); |
| 1012 | BCMOLT_MSG_FIELD_GET(&dev_cfg, firmware_sw_version); |
| 1013 | BCMOLT_MSG_FIELD_GET(&dev_cfg, chip_family); |
| 1014 | BCMOLT_MSG_FIELD_GET(&dev_cfg, system_mode); |
Amit Ghosh | fcad4d3 | 2019-11-13 10:24:55 +0000 | [diff] [blame] | 1015 | err = bcmolt_cfg_get_mult_retry(dev_id, &dev_cfg.hdr); |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 1016 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 1017 | OPENOLT_LOG(WARNING, openolt_log_id,"Failed to query PON MAC Device %d (errno = %s). Skipping the device.\n", devid, bcmos_strerror(err)); |
Amit Ghosh | fcad4d3 | 2019-11-13 10:24:55 +0000 | [diff] [blame] | 1018 | num_failed_cfg_gets++; |
| 1019 | continue; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1020 | } |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 1021 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1022 | std::string bal_version; |
| 1023 | bal_version += std::to_string(dev_cfg.data.firmware_sw_version.major) |
| 1024 | + "." + std::to_string(dev_cfg.data.firmware_sw_version.minor) |
| 1025 | + "." + std::to_string(dev_cfg.data.firmware_sw_version.revision); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1026 | firmware_version = "BAL." + bal_version + "__" + openolt_version; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1027 | |
| 1028 | switch(dev_cfg.data.system_mode) { |
| 1029 | case 10: board_technology = "GPON"; FILL_ARRAY(intf_technologies,devid*4,(devid+1)*4,"GPON"); break; |
| 1030 | case 11: board_technology = "GPON"; FILL_ARRAY(intf_technologies,devid*8,(devid+1)*8,"GPON"); break; |
| 1031 | case 12: board_technology = "GPON"; FILL_ARRAY(intf_technologies,devid*16,(devid+1)*16,"GPON"); break; |
| 1032 | case 13: board_technology = "XGPON"; FILL_ARRAY(intf_technologies,devid*2,(devid+1)*2,"XGPON"); break; |
| 1033 | case 14: board_technology = "XGPON"; FILL_ARRAY(intf_technologies,devid*4,(devid+1)*4,"XGPON"); break; |
| 1034 | case 15: board_technology = "XGPON"; FILL_ARRAY(intf_technologies,devid*8,(devid+1)*8,"XGPON"); break; |
| 1035 | case 16: board_technology = "XGPON"; FILL_ARRAY(intf_technologies,devid*16,(devid+1)*16,"XGPON"); break; |
| 1036 | case 18: board_technology = "XGS-PON"; FILL_ARRAY(intf_technologies,devid*2,(devid+1)*2,"XGS-PON"); break; |
| 1037 | case 19: board_technology = "XGS-PON"; FILL_ARRAY(intf_technologies,devid*16,(devid+1)*16,"XGS-PON"); break; |
| 1038 | case 20: board_technology = MIXED_TECH; FILL_ARRAY(intf_technologies,devid*2,(devid+1)*2,MIXED_TECH); break; |
Arthur Syu | 094df16 | 2022-04-21 17:50:06 +0800 | [diff] [blame] | 1039 | case 38: |
| 1040 | board_technology = "XGS-PON"; |
| 1041 | FILL_ARRAY2(intf_technologies,devid*16,(devid+1)*16,"XGS-PON"); |
| 1042 | FILL_ARRAY2(intf_technologies,devid*16+1,(devid+1)*16+1,"GPON"); |
| 1043 | break; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1044 | } |
| 1045 | |
| 1046 | switch(dev_cfg.data.chip_family) { |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1047 | case BCMOLT_CHIP_FAMILY_CHIP_FAMILY_6862_X: chip_family = "Maple"; break; |
| 1048 | case BCMOLT_CHIP_FAMILY_CHIP_FAMILY_6865_X: chip_family = "Aspen"; break; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1049 | } |
| 1050 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1051 | OPENOLT_LOG(INFO, openolt_log_id, "device %d, pon: %d, version %s, family: %s, board_technology: %s\n", |
| 1052 | devid, BCM_MAX_PONS_PER_DEV, bal_version.c_str(), chip_family.c_str(), board_technology.c_str()); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1053 | |
| 1054 | bcmos_usleep(500000); |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 1055 | } |
| 1056 | |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1057 | /* If all the devices returned errors then we tell the caller that this is an error else we work with |
Amit Ghosh | fcad4d3 | 2019-11-13 10:24:55 +0000 | [diff] [blame] | 1058 | only the devices that retured success*/ |
| 1059 | if (num_failed_cfg_gets == BCM_MAX_DEVS_PER_LINE_CARD) { |
| 1060 | OPENOLT_LOG(ERROR, openolt_log_id, "device: Query of all the devices failed\n"); |
| 1061 | return bcm_to_grpc_err(err, "device: All devices failed query"); |
| 1062 | } |
| 1063 | |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 1064 | return Status::OK; |
| 1065 | } |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 1066 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1067 | Status SetStateUplinkIf_(uint32_t intf_id, bool set_state) { |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1068 | bcmos_errno err = BCM_ERR_OK; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1069 | bcmolt_nni_interface_key intf_key = {.id = (bcmolt_interface)intf_id}; |
| 1070 | bcmolt_nni_interface_set_nni_state nni_interface_set_state; |
| 1071 | bcmolt_interface_state state; |
Craig Lutgen | d0bae9b | 2018-10-18 18:02:07 -0500 | [diff] [blame] | 1072 | |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 1073 | err = get_nni_interface_status((bcmolt_interface)intf_id, &state); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1074 | if (err == BCM_ERR_OK) { |
| 1075 | if (set_state && state == BCMOLT_INTERFACE_STATE_ACTIVE_WORKING) { |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 1076 | OPENOLT_LOG(WARNING, openolt_log_id, "NNI interface: %d already enabled\n", intf_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1077 | OPENOLT_LOG(INFO, openolt_log_id, "Initializing tm sched creation for NNI interface: %d\n", intf_id); |
| 1078 | CreateDefaultSched(intf_id, upstream); |
| 1079 | CreateDefaultQueue(intf_id, upstream); |
| 1080 | return Status::OK; |
| 1081 | } else if (!set_state && state == BCMOLT_INTERFACE_STATE_INACTIVE) { |
| 1082 | OPENOLT_LOG(INFO, openolt_log_id, "NNI interface: %d already disabled\n", intf_id); |
| 1083 | return Status::OK; |
| 1084 | } |
Craig Lutgen | d0bae9b | 2018-10-18 18:02:07 -0500 | [diff] [blame] | 1085 | } |
| 1086 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1087 | BCMOLT_OPER_INIT(&nni_interface_set_state, nni_interface, set_nni_state, intf_key); |
| 1088 | if (set_state) { |
| 1089 | BCMOLT_FIELD_SET(&nni_interface_set_state.data, nni_interface_set_nni_state_data, |
| 1090 | nni_state, BCMOLT_INTERFACE_OPERATION_ACTIVE_WORKING); |
| 1091 | } else { |
| 1092 | BCMOLT_FIELD_SET(&nni_interface_set_state.data, nni_interface_set_nni_state_data, |
| 1093 | nni_state, BCMOLT_INTERFACE_OPERATION_INACTIVE); |
| 1094 | } |
| 1095 | err = bcmolt_oper_submit(dev_id, &nni_interface_set_state.hdr); |
| 1096 | if (err != BCM_ERR_OK) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 1097 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to %s NNI interface: %d, err = %s\n", |
| 1098 | (set_state)?"enable":"disable", intf_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1099 | return bcm_to_grpc_err(err, "Failed to enable NNI interface"); |
| 1100 | } |
| 1101 | else { |
| 1102 | OPENOLT_LOG(INFO, openolt_log_id, "Successfully %s NNI interface: %d\n", (set_state)?"enable":"disable", intf_id); |
| 1103 | if (set_state) { |
| 1104 | OPENOLT_LOG(INFO, openolt_log_id, "Initializing tm sched creation for NNI interface: %d\n", intf_id); |
| 1105 | CreateDefaultSched(intf_id, upstream); |
| 1106 | CreateDefaultQueue(intf_id, upstream); |
| 1107 | } |
Nicolas Palpacuer | e3fc0d2 | 2018-08-02 16:51:05 -0400 | [diff] [blame] | 1108 | } |
| 1109 | |
| 1110 | return Status::OK; |
| 1111 | } |
| 1112 | |
Elia Battiston | 869a5de | 2022-02-08 11:40:58 +0100 | [diff] [blame] | 1113 | uint32_t GetNniSpeed_(uint32_t intf_id) { |
| 1114 | bcmos_errno err = BCM_ERR_OK; |
| 1115 | |
| 1116 | uint32_t speed; |
| 1117 | err = get_nni_interface_speed((bcmolt_interface)intf_id, &speed); |
| 1118 | if (err != BCM_ERR_OK) { |
| 1119 | OPENOLT_LOG(WARNING, openolt_log_id, "Failed to read speed of NNI interface: %d\n", intf_id); |
| 1120 | return 0; //This will cause the adapter to use the default speed value |
| 1121 | } |
| 1122 | |
| 1123 | return speed; |
| 1124 | } |
| 1125 | |
Nicolas Palpacuer | 05ea0ea | 2018-07-06 11:47:21 -0400 | [diff] [blame] | 1126 | Status DisablePonIf_(uint32_t intf_id) { |
Chaitrashree G S | 73e084d | 2019-11-20 16:18:59 -0500 | [diff] [blame] | 1127 | bcmos_errno err; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1128 | bcmolt_pon_interface_cfg interface_obj; |
Chaitrashree G S | 73e084d | 2019-11-20 16:18:59 -0500 | [diff] [blame] | 1129 | bcmolt_pon_interface_key intf_key = {.pon_ni = (bcmolt_interface)intf_id}; |
| 1130 | bcmolt_pon_interface_set_pon_interface_state pon_interface_set_state; |
Nicolas Palpacuer | 05ea0ea | 2018-07-06 11:47:21 -0400 | [diff] [blame] | 1131 | |
Chaitrashree G S | 73e084d | 2019-11-20 16:18:59 -0500 | [diff] [blame] | 1132 | BCMOLT_CFG_INIT(&interface_obj, pon_interface, intf_key); |
Girish Gowdra | e1db295 | 2021-05-04 00:16:54 -0700 | [diff] [blame] | 1133 | BCMOLT_MSG_FIELD_GET(&interface_obj, state); |
| 1134 | |
| 1135 | err = bcmolt_cfg_get(dev_id, &interface_obj.hdr); |
| 1136 | if (err != BCM_ERR_OK) { |
| 1137 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to fetch pon port status, PON interface %d, err %d err_text=%s \n", intf_id, err, interface_obj.hdr.hdr.err_text); |
| 1138 | return bcm_to_grpc_err(err, "Failed to fetch pon port state"); |
| 1139 | } |
| 1140 | if (interface_obj.data.state == BCMOLT_INTERFACE_STATE_INACTIVE) { |
| 1141 | OPENOLT_LOG(INFO, openolt_log_id, "PON Interface already inactive, PON interface %d\n", intf_id); |
| 1142 | return Status::OK; |
| 1143 | } |
| 1144 | |
| 1145 | BCMOLT_CFG_INIT(&interface_obj, pon_interface, intf_key); |
Chaitrashree G S | 73e084d | 2019-11-20 16:18:59 -0500 | [diff] [blame] | 1146 | BCMOLT_OPER_INIT(&pon_interface_set_state, pon_interface, set_pon_interface_state, intf_key); |
| 1147 | BCMOLT_MSG_FIELD_SET(&interface_obj, discovery.control, BCMOLT_CONTROL_STATE_DISABLE); |
| 1148 | |
| 1149 | err = bcmolt_cfg_set(dev_id, &interface_obj.hdr); |
| 1150 | if (err != BCM_ERR_OK) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1151 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to disable discovery of onu, PON interface %d, err = %s (%d(\n", intf_id, interface_obj.hdr.hdr.err_text, err); |
Chaitrashree G S | 73e084d | 2019-11-20 16:18:59 -0500 | [diff] [blame] | 1152 | return bcm_to_grpc_err(err, "Failed to disable discovery of onu"); |
| 1153 | } |
| 1154 | |
| 1155 | BCMOLT_FIELD_SET(&pon_interface_set_state.data, pon_interface_set_pon_interface_state_data, |
| 1156 | operation, BCMOLT_INTERFACE_OPERATION_INACTIVE); |
| 1157 | |
| 1158 | err = bcmolt_oper_submit(dev_id, &pon_interface_set_state.hdr); |
| 1159 | if (err != BCM_ERR_OK) { |
| 1160 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to disable PON interface: %d\n , err %d\n", intf_id, err); |
Nicolas Palpacuer | 73222e0 | 2018-07-16 12:20:26 -0400 | [diff] [blame] | 1161 | return bcm_to_grpc_err(err, "Failed to disable PON interface"); |
Nicolas Palpacuer | 05ea0ea | 2018-07-06 11:47:21 -0400 | [diff] [blame] | 1162 | } |
| 1163 | |
Chaitrashree G S | 73e084d | 2019-11-20 16:18:59 -0500 | [diff] [blame] | 1164 | OPENOLT_LOG(INFO, openolt_log_id, "Successfully disabled PON interface: %d\n", intf_id); |
Nicolas Palpacuer | 05ea0ea | 2018-07-06 11:47:21 -0400 | [diff] [blame] | 1165 | return Status::OK; |
| 1166 | } |
| 1167 | |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1168 | Status ActivateOnu_(uint32_t intf_id, uint32_t onu_id, |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 1169 | const char *vendor_id, const char *vendor_specific, uint32_t pir, bool omcc_encryption_mode) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1170 | bcmos_errno err = BCM_ERR_OK; |
| 1171 | bcmolt_onu_cfg onu_cfg; |
| 1172 | bcmolt_onu_key onu_key; |
| 1173 | bcmolt_serial_number serial_number; /**< ONU serial number */ |
| 1174 | bcmolt_bin_str_36 registration_id; /**< ONU registration ID */ |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1175 | |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1176 | bcmolt_onu_set_onu_state onu_oper; /* declare main API struct */ |
| 1177 | bcmolt_onu_state onu_state; |
| 1178 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1179 | onu_key.onu_id = onu_id; |
| 1180 | onu_key.pon_ni = intf_id; |
| 1181 | BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key); |
| 1182 | BCMOLT_FIELD_SET_PRESENT(&onu_cfg.data, onu_cfg_data, onu_state); |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1183 | #ifdef TEST_MODE |
Thiyagarajan Subramani | 6dc2005 | 2019-12-05 09:06:36 -0500 | [diff] [blame] | 1184 | // It is impossible to mock the setting of onu_cfg.data.onu_state because |
| 1185 | // the actual bcmolt_cfg_get passes the address of onu_cfg.hdr and we cannot |
| 1186 | // set the onu_cfg.data.onu_state. So a new stub function is created and address |
| 1187 | // of onu_cfg is passed. This is one-of case where we need to add test specific |
| 1188 | // code in production code. |
| 1189 | err = bcmolt_cfg_get__onu_state_stub(dev_id, &onu_cfg); |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1190 | #else |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1191 | err = bcmolt_cfg_get(dev_id, &onu_cfg.hdr); |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1192 | #endif |
| 1193 | OPENOLT_LOG(INFO, openolt_log_id, "Activate ONU : old state = %d, current state = %d\n", |
| 1194 | onu_cfg.data.onu_old_state, onu_cfg.data.onu_state); |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 1195 | if (err == BCM_ERR_OK) { |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1196 | if (onu_cfg.data.onu_state == BCMOLT_ONU_STATE_ACTIVE) { |
| 1197 | OPENOLT_LOG(INFO, openolt_log_id, "ONU is already in ACTIVE state, \ |
| 1198 | not processing this request for pon_intf=%d onu_id=%d\n", intf_id, onu_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1199 | return Status::OK; |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1200 | } else if (onu_cfg.data.onu_state != BCMOLT_ONU_STATE_NOT_CONFIGURED && |
| 1201 | onu_cfg.data.onu_state != BCMOLT_ONU_STATE_INACTIVE) { |
| 1202 | // We need the ONU to be in NOT_CONFIGURED or INACTIVE state to further process the request |
| 1203 | OPENOLT_LOG(ERROR, openolt_log_id, "ONU in an invalid state to process the request, \ |
| 1204 | state=%d pon_intf=%d onu_id=%d\n", onu_cfg.data.onu_state, intf_id, onu_id); |
| 1205 | return bcm_to_grpc_err(err, "Failed to activate ONU, invalid ONU state"); |
| 1206 | } |
| 1207 | } else { |
| 1208 | // This should never happen. BAL GET should succeed for non-existant ONUs too. The state of such ONUs will be NOT_CONFIGURED |
| 1209 | OPENOLT_LOG(ERROR, openolt_log_id, "ONU state query failed pon_intf=%d onu_id=%d\n", intf_id, onu_id); |
| 1210 | return bcm_to_grpc_err(err, "onu get failed"); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1211 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1212 | |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1213 | // If the ONU is not configured at all we need to first configure it |
| 1214 | if (onu_cfg.data.onu_state == BCMOLT_ONU_STATE_NOT_CONFIGURED) { |
| 1215 | OPENOLT_LOG(INFO, openolt_log_id, "Configuring ONU %d on PON %d : vendor id %s, \ |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 1216 | vendor specific %s, pir %d\n", onu_id, intf_id, vendor_id, |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1217 | vendor_specific_to_str(vendor_specific).c_str(), pir); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1218 | |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1219 | memcpy(serial_number.vendor_id.arr, vendor_id, 4); |
| 1220 | memcpy(serial_number.vendor_specific.arr, vendor_specific, 4); |
| 1221 | BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key); |
| 1222 | BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.serial_number, serial_number); |
| 1223 | BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.auto_learning, BCMOS_TRUE); |
| 1224 | /*set burst and data profiles to fec disabled*/ |
Arthur Syu | 094df16 | 2022-04-21 17:50:06 +0800 | [diff] [blame] | 1225 | std::string intf_technology = intf_technologies[intf_id]; |
| 1226 | if (intf_technology == "XGS-PON") { |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1227 | BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.xgpon.ranging_burst_profile, 2); |
| 1228 | BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.xgpon.data_burst_profile, 1); |
Arthur Syu | 094df16 | 2022-04-21 17:50:06 +0800 | [diff] [blame] | 1229 | } else if (intf_technology == "GPON") { |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1230 | BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.gpon.ds_ber_reporting_interval, 1000000); |
| 1231 | BCMOLT_MSG_FIELD_SET(&onu_cfg, itu.gpon.omci_port_id, onu_id); |
| 1232 | } |
| 1233 | err = bcmolt_cfg_set(dev_id, &onu_cfg.hdr); |
| 1234 | if (err != BCM_ERR_OK) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1235 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to configure ONU %d on PON %d, err = %s (%d)\n", onu_id, intf_id, onu_cfg.hdr.hdr.err_text, err); |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1236 | return bcm_to_grpc_err(err, "Failed to configure ONU"); |
| 1237 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1238 | } |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1239 | |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1240 | // TODO: MOVE THIS TO A NEW METHOD |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 1241 | if (omcc_encryption_mode == true) { |
| 1242 | // set the encryption mode for omci port id |
| 1243 | bcmolt_itupon_gem_cfg gem_cfg; |
| 1244 | bcmolt_itupon_gem_key key = {}; |
| 1245 | bcmolt_gem_port_configuration configuration = {}; |
| 1246 | key.pon_ni = intf_id; |
| 1247 | key.gem_port_id = onu_id; |
| 1248 | bcmolt_control_state encryption_mode; |
| 1249 | encryption_mode = BCMOLT_CONTROL_STATE_ENABLE; |
| 1250 | BCMOLT_CFG_INIT(&gem_cfg, itupon_gem, key); |
| 1251 | BCMOLT_FIELD_SET(&gem_cfg.data, itupon_gem_cfg_data, encryption_mode, encryption_mode); |
| 1252 | err = bcmolt_cfg_set(dev_id, &gem_cfg.hdr); |
| 1253 | if(err != BCM_ERR_OK) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1254 | OPENOLT_LOG(ERROR, openolt_log_id, "failed to configure omci gem_port encryption mode = %d, err = %s (%d)\n", onu_id, gem_cfg.hdr.hdr.err_text, err); |
kesavand | c1f2db9 | 2020-08-31 15:32:06 +0530 | [diff] [blame] | 1255 | return bcm_to_grpc_err(err, "Access_Control set ITU PON OMCI Gem port failed"); |
| 1256 | } |
| 1257 | } |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1258 | // Now that the ONU is configured, move the ONU to ACTIVE state |
| 1259 | memset(&onu_cfg, 0, sizeof(bcmolt_onu_cfg)); |
| 1260 | BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key); |
| 1261 | BCMOLT_FIELD_SET_PRESENT(&onu_cfg.data, onu_cfg_data, onu_state); |
| 1262 | BCMOLT_OPER_INIT(&onu_oper, onu, set_onu_state, onu_key); |
| 1263 | BCMOLT_FIELD_SET(&onu_oper.data, onu_set_onu_state_data, |
| 1264 | onu_state, BCMOLT_ONU_OPERATION_ACTIVE); |
| 1265 | err = bcmolt_oper_submit(dev_id, &onu_oper.hdr); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1266 | if (err != BCM_ERR_OK) { |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1267 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to activate ONU %d on PON %d, err = %s\n", onu_id, intf_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1268 | return bcm_to_grpc_err(err, "Failed to activate ONU"); |
| 1269 | } |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1270 | // ONU will eventually get activated after we have submitted the operation request. The adapter will receive an asynchronous |
| 1271 | // ONU_ACTIVATION_COMPLETED_INDICATION |
| 1272 | |
| 1273 | OPENOLT_LOG(INFO, openolt_log_id, "Activated ONU, onu_id %d on PON %d\n", onu_id, intf_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1274 | |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 1275 | return Status::OK; |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1276 | } |
| 1277 | |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1278 | Status DeactivateOnu_(uint32_t intf_id, uint32_t onu_id, |
| 1279 | const char *vendor_id, const char *vendor_specific) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1280 | bcmos_errno err = BCM_ERR_OK; |
| 1281 | bcmolt_onu_set_onu_state onu_oper; /* declare main API struct */ |
| 1282 | bcmolt_onu_cfg onu_cfg; |
| 1283 | bcmolt_onu_key onu_key; /**< Object key. */ |
| 1284 | bcmolt_onu_state onu_state; |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1285 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1286 | onu_key.onu_id = onu_id; |
| 1287 | onu_key.pon_ni = intf_id; |
| 1288 | BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key); |
| 1289 | BCMOLT_FIELD_SET_PRESENT(&onu_cfg.data, onu_cfg_data, onu_state); |
| 1290 | err = bcmolt_cfg_get(dev_id, &onu_cfg.hdr); |
Girish Gowdra | 7a79dae | 2020-02-10 18:22:11 +0530 | [diff] [blame] | 1291 | onu_state = onu_cfg.data.onu_state; |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 1292 | if (err == BCM_ERR_OK) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1293 | switch (onu_state) { |
Thiyagarajan Subramani | 6dc2005 | 2019-12-05 09:06:36 -0500 | [diff] [blame] | 1294 | case BCMOLT_ONU_STATE_ACTIVE: |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1295 | BCMOLT_OPER_INIT(&onu_oper, onu, set_onu_state, onu_key); |
Chaitrashree G S | fd15c8c | 2019-09-09 18:46:15 -0400 | [diff] [blame] | 1296 | BCMOLT_FIELD_SET(&onu_oper.data, onu_set_onu_state_data, |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1297 | onu_state, BCMOLT_ONU_OPERATION_INACTIVE); |
| 1298 | err = bcmolt_oper_submit(dev_id, &onu_oper.hdr); |
| 1299 | if (err != BCM_ERR_OK) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 1300 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to deactivate ONU %d on PON %d, err = %s\n", onu_id, intf_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1301 | return bcm_to_grpc_err(err, "Failed to deactivate ONU"); |
| 1302 | } |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 1303 | OPENOLT_LOG(INFO, openolt_log_id, "Deactivated ONU, onu_id %d on PON %d\n", onu_id, intf_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1304 | break; |
| 1305 | } |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1306 | } else { |
| 1307 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to deactivate ONU %d on PON %d, err = %s\n", onu_id, intf_id, bcmos_strerror(err)); |
| 1308 | return bcm_to_grpc_err(err, "Failed to get onu config"); |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1309 | } |
| 1310 | |
| 1311 | return Status::OK; |
| 1312 | } |
| 1313 | |
| 1314 | Status DeleteOnu_(uint32_t intf_id, uint32_t onu_id, |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 1315 | const char *vendor_id, const char *vendor_specific) { |
Girish Gowdra | 7a79dae | 2020-02-10 18:22:11 +0530 | [diff] [blame] | 1316 | bcmos_errno err = BCM_ERR_OK; |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 1317 | bcmolt_onu_state onu_state; |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1318 | Status st; |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 1319 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1320 | OPENOLT_LOG(INFO, openolt_log_id, "DeleteOnu ONU %d on PON %d : vendor id %s, vendor specific %s\n", |
Craig Lutgen | d0bae9b | 2018-10-18 18:02:07 -0500 | [diff] [blame] | 1321 | onu_id, intf_id, vendor_id, vendor_specific_to_str(vendor_specific).c_str()); |
| 1322 | |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 1323 | // Need to deactivate before removing it (BAL rules) |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1324 | st = DeactivateOnu_(intf_id, onu_id, vendor_id, vendor_specific); |
| 1325 | if (st.error_code() != grpc::StatusCode::OK) { |
| 1326 | return st; |
| 1327 | } |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 1328 | |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1329 | err = get_onu_state((bcmolt_interface)intf_id, onu_id, &onu_state); |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 1330 | if (err == BCM_ERR_OK) { |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1331 | if (onu_state != BCMOLT_ONU_STATE_INACTIVE) { |
| 1332 | OPENOLT_LOG(INFO, openolt_log_id, "waiting for onu deactivate complete response: intf_id=%d, onu_id=%d\n", |
| 1333 | intf_id, onu_id); |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 1334 | err = wait_for_onu_deactivate_complete(intf_id, onu_id); |
| 1335 | if (err) { |
| 1336 | OPENOLT_LOG(ERROR, openolt_log_id, "failed to delete onu intf_id %d, onu_id %d\n", |
| 1337 | intf_id, onu_id); |
| 1338 | return bcm_to_grpc_err(err, "Failed to delete ONU"); |
| 1339 | } |
| 1340 | } |
Girish Gowdra | 2429703 | 2020-03-23 12:32:37 -0700 | [diff] [blame] | 1341 | else { |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 1342 | OPENOLT_LOG(INFO, openolt_log_id, "Onu is Inactive, onu_id: %d, not waiting for onu deactivate complete response\n", |
| 1343 | intf_id); |
| 1344 | } |
| 1345 | } |
| 1346 | else { |
| 1347 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to fetch Onu status, onu_id = %d, intf_id = %d, err = %s\n", |
| 1348 | onu_id, intf_id, bcmos_strerror(err)); |
Girish Gowdra | 7a79dae | 2020-02-10 18:22:11 +0530 | [diff] [blame] | 1349 | return bcm_to_grpc_err(err, "Failed to delete ONU"); |
| 1350 | } |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 1351 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1352 | bcmolt_onu_cfg cfg_obj; |
| 1353 | bcmolt_onu_key key; |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1354 | |
Thiyagarajan Subramani | 6dc2005 | 2019-12-05 09:06:36 -0500 | [diff] [blame] | 1355 | OPENOLT_LOG(INFO, openolt_log_id, "Processing onu cfg clear for onu_id %d and intf_id %d\n", |
Nicolas Palpacuer | 967438f | 2018-09-07 14:41:54 -0400 | [diff] [blame] | 1356 | onu_id, intf_id); |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1357 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1358 | key.onu_id = onu_id; |
| 1359 | key.pon_ni = intf_id; |
| 1360 | BCMOLT_CFG_INIT(&cfg_obj, onu, key); |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1361 | |
Girish Gowdra | 7a79dae | 2020-02-10 18:22:11 +0530 | [diff] [blame] | 1362 | err = bcmolt_cfg_clear(dev_id, &cfg_obj.hdr); |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1363 | if (err != BCM_ERR_OK) |
| 1364 | { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1365 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to clear information for BAL onu_id %d, Interface ID %d, err = %s (%d)\n", onu_id, intf_id, cfg_obj.hdr.hdr.err_text, err); |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1366 | return Status(grpc::StatusCode::INTERNAL, "Failed to delete ONU"); |
| 1367 | } |
| 1368 | |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 1369 | OPENOLT_LOG(INFO, openolt_log_id, "Deleted ONU, onu_id %d on PON %d\n", onu_id, intf_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1370 | return Status::OK; |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 1371 | } |
| 1372 | |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1373 | #define MAX_CHAR_LENGTH 20 |
| 1374 | #define MAX_OMCI_MSG_LENGTH 44 |
| 1375 | Status OmciMsgOut_(uint32_t intf_id, uint32_t onu_id, const std::string pkt) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1376 | bcmolt_bin_str buf = {}; |
| 1377 | bcmolt_onu_cpu_packets omci_cpu_packets; |
| 1378 | bcmolt_onu_key key; |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1379 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1380 | key.pon_ni = intf_id; |
| 1381 | key.onu_id = onu_id; |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1382 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1383 | BCMOLT_OPER_INIT(&omci_cpu_packets, onu, cpu_packets, key); |
| 1384 | BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, packet_type, BCMOLT_PACKET_TYPE_OMCI); |
| 1385 | BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, calc_crc, BCMOS_TRUE); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1386 | |
| 1387 | // ??? |
| 1388 | if ((pkt.size()/2) > MAX_OMCI_MSG_LENGTH) { |
| 1389 | buf.len = MAX_OMCI_MSG_LENGTH; |
| 1390 | } else { |
| 1391 | buf.len = pkt.size()/2; |
| 1392 | } |
| 1393 | |
| 1394 | /* Send the OMCI packet using the BAL remote proxy API */ |
| 1395 | uint16_t idx1 = 0; |
| 1396 | uint16_t idx2 = 0; |
| 1397 | uint8_t arraySend[buf.len]; |
| 1398 | char str1[MAX_CHAR_LENGTH]; |
| 1399 | char str2[MAX_CHAR_LENGTH]; |
| 1400 | memset(&arraySend, 0, buf.len); |
| 1401 | |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1402 | for (idx1=0,idx2=0; idx1<((buf.len)*2); idx1++,idx2++) { |
| 1403 | sprintf(str1,"%c", pkt[idx1]); |
| 1404 | sprintf(str2,"%c", pkt[++idx1]); |
| 1405 | strcat(str1,str2); |
| 1406 | arraySend[idx2] = strtol(str1, NULL, 16); |
| 1407 | } |
| 1408 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1409 | buf.arr = (uint8_t *)malloc((buf.len)*sizeof(uint8_t)); |
| 1410 | memcpy(buf.arr, (uint8_t *)arraySend, buf.len); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1411 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1412 | BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, number_of_packets, 1); |
| 1413 | BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, packet_size, buf.len); |
| 1414 | BCMOLT_MSG_FIELD_SET(&omci_cpu_packets, buffer, buf); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1415 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1416 | bcmos_errno err = bcmolt_oper_submit(dev_id, &omci_cpu_packets.hdr); |
Nicolas Palpacuer | 967438f | 2018-09-07 14:41:54 -0400 | [diff] [blame] | 1417 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 1418 | OPENOLT_LOG(ERROR, openolt_log_id, "Error sending OMCI message to ONU %d on PON %d, err = %s\n", onu_id, intf_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1419 | return bcm_to_grpc_err(err, "send OMCI failed"); |
Nicolas Palpacuer | 967438f | 2018-09-07 14:41:54 -0400 | [diff] [blame] | 1420 | } else { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1421 | OPENOLT_LOG(DEBUG, omci_log_id, "OMCI request msg of length %d sent to ONU %d on PON %d : %s\n", |
Craig Lutgen | 88a22ad | 2018-10-04 12:30:46 -0500 | [diff] [blame] | 1422 | buf.len, onu_id, intf_id, pkt.c_str()); |
Nicolas Palpacuer | 967438f | 2018-09-07 14:41:54 -0400 | [diff] [blame] | 1423 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1424 | free(buf.arr); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1425 | |
| 1426 | return Status::OK; |
| 1427 | } |
| 1428 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1429 | Status OnuPacketOut_(uint32_t intf_id, uint32_t onu_id, uint32_t port_no, uint32_t gemport_id, const std::string pkt) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1430 | bcmolt_pon_interface_cpu_packets pon_interface_cpu_packets; /**< declare main API struct */ |
| 1431 | bcmolt_pon_interface_key key = {.pon_ni = (bcmolt_interface)intf_id}; /**< declare key */ |
| 1432 | bcmolt_bin_str buf = {}; |
| 1433 | bcmolt_gem_port_id gem_port_id_array[1]; |
| 1434 | bcmolt_gem_port_id_list_u8_max_16 gem_port_list = {}; |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1435 | |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1436 | if (port_no > 0) { |
| 1437 | bool found = false; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1438 | if (gemport_id == 0) { |
| 1439 | bcmos_fastlock_lock(&data_lock); |
| 1440 | // Map the port_no to one of the flows that owns it to find a gemport_id for that flow. |
| 1441 | // Pick any flow that is mapped with the same port_no. |
| 1442 | std::map<uint32_t, std::set<uint32_t> >::const_iterator it = port_to_flows.find(port_no); |
| 1443 | if (it != port_to_flows.end() && !it->second.empty()) { |
| 1444 | uint32_t flow_id = *(it->second.begin()); // Pick any flow_id out of the bag set |
| 1445 | std::map<uint32_t, uint32_t>::const_iterator fit = flowid_to_gemport.find(flow_id); |
| 1446 | if (fit != flowid_to_gemport.end()) { |
| 1447 | found = true; |
| 1448 | gemport_id = fit->second; |
| 1449 | } |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1450 | } |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1451 | bcmos_fastlock_unlock(&data_lock, 0); |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1452 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1453 | if (!found) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1454 | OPENOLT_LOG(ERROR, openolt_log_id, "Packet out failed to find destination for ONU %d port_no %u on PON %d\n", |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1455 | onu_id, port_no, intf_id); |
| 1456 | return grpc::Status(grpc::StatusCode::NOT_FOUND, "no flow for port_no"); |
| 1457 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1458 | OPENOLT_LOG(INFO, openolt_log_id, "Gem port %u found for ONU %d port_no %u on PON %d\n", |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1459 | gemport_id, onu_id, port_no, intf_id); |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1460 | } |
| 1461 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1462 | gem_port_id_array[0] = gemport_id; |
| 1463 | gem_port_list.len = 1; |
| 1464 | gem_port_list.arr = gem_port_id_array; |
| 1465 | buf.len = pkt.size(); |
| 1466 | buf.arr = (uint8_t *)malloc((buf.len)*sizeof(uint8_t)); |
| 1467 | memcpy(buf.arr, (uint8_t *)pkt.data(), buf.len); |
| 1468 | |
| 1469 | /* init the API struct */ |
| 1470 | BCMOLT_OPER_INIT(&pon_interface_cpu_packets, pon_interface, cpu_packets, key); |
| 1471 | BCMOLT_MSG_FIELD_SET(&pon_interface_cpu_packets, packet_type, BCMOLT_PACKET_TYPE_ETH); |
| 1472 | BCMOLT_MSG_FIELD_SET(&pon_interface_cpu_packets, calc_crc, BCMOS_TRUE); |
| 1473 | BCMOLT_MSG_FIELD_SET(&pon_interface_cpu_packets, gem_port_list, gem_port_list); |
| 1474 | BCMOLT_MSG_FIELD_SET(&pon_interface_cpu_packets, buffer, buf); |
| 1475 | |
| 1476 | OPENOLT_LOG(INFO, openolt_log_id, "Packet out of length %d sent to gemport %d on pon %d port_no %u\n", |
| 1477 | (uint8_t)pkt.size(), gemport_id, intf_id, port_no); |
| 1478 | |
| 1479 | /* call API */ |
| 1480 | bcmolt_oper_submit(dev_id, &pon_interface_cpu_packets.hdr); |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1481 | } |
| 1482 | else { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1483 | //TODO: Port No is 0, it is coming sender requirement. |
| 1484 | OPENOLT_LOG(INFO, openolt_log_id, "port_no %d onu %d on pon %d\n", |
| 1485 | port_no, onu_id, intf_id); |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1486 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1487 | free(buf.arr); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1488 | |
| 1489 | return Status::OK; |
| 1490 | } |
| 1491 | |
Nicolas Palpacuer | b78def4 | 2018-06-07 12:55:26 -0400 | [diff] [blame] | 1492 | Status UplinkPacketOut_(uint32_t intf_id, const std::string pkt) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1493 | bcmolt_flow_key key = {}; /* declare key */ |
| 1494 | bcmolt_bin_str buffer = {}; |
| 1495 | bcmolt_flow_send_eth_packet oper; /* declare main API struct */ |
Nicolas Palpacuer | b78def4 | 2018-06-07 12:55:26 -0400 | [diff] [blame] | 1496 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1497 | // TODO: flow_id is currently not passed in UplinkPacket message from voltha. |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1498 | bcmolt_flow_id flow_id = INVALID_FLOW_ID; |
Nicolas Palpacuer | b78def4 | 2018-06-07 12:55:26 -0400 | [diff] [blame] | 1499 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1500 | //validate flow_id and find flow_id/flow type: upstream/ingress type: PON/egress type: NNI |
| 1501 | if (get_flow_status(flow_id, BCMOLT_FLOW_TYPE_UPSTREAM, FLOW_TYPE) == BCMOLT_FLOW_TYPE_UPSTREAM && \ |
| 1502 | get_flow_status(flow_id, BCMOLT_FLOW_TYPE_UPSTREAM, INGRESS_INTF_TYPE) == BCMOLT_FLOW_INTERFACE_TYPE_PON && \ |
| 1503 | get_flow_status(flow_id, BCMOLT_FLOW_TYPE_UPSTREAM, EGRESS_INTF_TYPE) == BCMOLT_FLOW_INTERFACE_TYPE_NNI) |
| 1504 | key.flow_id = flow_id; |
| 1505 | else { |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1506 | if (flow_id_counters) { |
| 1507 | std::map<flow_pair, int>::iterator it; |
| 1508 | for(it = flow_map.begin(); it != flow_map.end(); it++) { |
| 1509 | int flow_index = it->first.first; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1510 | if (get_flow_status(flow_index, BCMOLT_FLOW_TYPE_UPSTREAM, FLOW_TYPE) == BCMOLT_FLOW_TYPE_UPSTREAM && \ |
| 1511 | get_flow_status(flow_index, BCMOLT_FLOW_TYPE_UPSTREAM, INGRESS_INTF_TYPE) == BCMOLT_FLOW_INTERFACE_TYPE_PON && \ |
| 1512 | get_flow_status(flow_index, BCMOLT_FLOW_TYPE_UPSTREAM, EGRESS_INTF_TYPE) == BCMOLT_FLOW_INTERFACE_TYPE_NNI) { |
| 1513 | key.flow_id = flow_index; |
| 1514 | break; |
| 1515 | } |
| 1516 | } |
| 1517 | } |
| 1518 | else { |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 1519 | OPENOLT_LOG(ERROR, openolt_log_id, "no flow id found for uplink packetout\n"); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1520 | return grpc::Status(grpc::StatusCode::NOT_FOUND, "no flow id found"); |
| 1521 | } |
| 1522 | } |
Nicolas Palpacuer | b78def4 | 2018-06-07 12:55:26 -0400 | [diff] [blame] | 1523 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1524 | key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM; /* send from uplink direction */ |
Nicolas Palpacuer | b78def4 | 2018-06-07 12:55:26 -0400 | [diff] [blame] | 1525 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1526 | /* Initialize the API struct. */ |
| 1527 | BCMOLT_OPER_INIT(&oper, flow, send_eth_packet, key); |
Nicolas Palpacuer | b78def4 | 2018-06-07 12:55:26 -0400 | [diff] [blame] | 1528 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1529 | buffer.len = pkt.size(); |
| 1530 | buffer.arr = (uint8_t *)malloc((buffer.len)*sizeof(uint8_t)); |
| 1531 | memcpy(buffer.arr, (uint8_t *)pkt.data(), buffer.len); |
| 1532 | if (buffer.arr == NULL) { |
| 1533 | OPENOLT_LOG(ERROR, openolt_log_id, "allocate packet buffer failed\n"); |
| 1534 | return bcm_to_grpc_err(BCM_ERR_PARM, "allocate packet buffer failed"); |
| 1535 | } |
| 1536 | BCMOLT_FIELD_SET(&oper.data, flow_send_eth_packet_data, buffer, buffer); |
| 1537 | |
| 1538 | bcmos_errno err = bcmolt_oper_submit(dev_id, &oper.hdr); |
| 1539 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 1540 | OPENOLT_LOG(ERROR, openolt_log_id, "Error sending packets via nni port %d, flow_id %d, err = %s\n", intf_id, key.flow_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 81c5611 | 2019-12-19 08:29:55 -0500 | [diff] [blame] | 1541 | return bcm_to_grpc_err(BCM_ERR_SYSCALL_ERR, "Error sending packets via nni port"); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1542 | } else { |
| 1543 | OPENOLT_LOG(INFO, openolt_log_id, "sent packets to port %d in upstream direction, flow_id %d \n", intf_id, key.flow_id); |
| 1544 | } |
Nicolas Palpacuer | b78def4 | 2018-06-07 12:55:26 -0400 | [diff] [blame] | 1545 | |
| 1546 | return Status::OK; |
| 1547 | } |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1548 | |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1549 | bool get_aes_flag_for_gem_port(const google::protobuf::Map<unsigned int, bool> &gemport_to_aes, uint32_t gemport_id) { |
| 1550 | bool aes_flag = false; |
| 1551 | for (google::protobuf::Map<unsigned int, bool>::const_iterator it=gemport_to_aes.begin(); it!=gemport_to_aes.end(); it++) { |
| 1552 | if (it->first == gemport_id) { |
| 1553 | aes_flag = it->second; |
| 1554 | break; |
| 1555 | } |
| 1556 | } |
| 1557 | return aes_flag; |
| 1558 | } |
| 1559 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1560 | Status FlowAddWrapper_(const ::openolt::Flow* request) { |
| 1561 | |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1562 | Status st = Status::OK; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1563 | int32_t access_intf_id = request->access_intf_id(); |
| 1564 | int32_t onu_id = request->onu_id(); |
| 1565 | int32_t uni_id = request->uni_id(); |
| 1566 | uint32_t port_no = request->port_no(); |
| 1567 | uint64_t voltha_flow_id = request->flow_id(); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1568 | uint64_t symmetric_voltha_flow_id = 0; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1569 | const std::string flow_type = request->flow_type(); |
| 1570 | int32_t alloc_id = request->alloc_id(); |
| 1571 | int32_t network_intf_id = request->network_intf_id(); |
| 1572 | int32_t gemport_id = request->gemport_id(); |
| 1573 | const ::openolt::Classifier& classifier = request->classifier(); |
| 1574 | const ::openolt::Action& action = request->action(); |
| 1575 | int32_t priority = request->priority(); |
| 1576 | uint64_t cookie = request->cookie(); |
| 1577 | int32_t group_id = request->group_id(); |
| 1578 | uint32_t tech_profile_id = request->tech_profile_id(); |
| 1579 | bool replicate_flow = request->replicate_flow(); |
| 1580 | const google::protobuf::Map<unsigned int, unsigned int> &pbit_to_gemport = request->pbit_to_gemport(); |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1581 | const google::protobuf::Map<unsigned int, bool> &gemport_to_aes = request->gemport_to_aes(); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1582 | uint16_t flow_id; |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1583 | bool enable_encryption; |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1584 | // When following conditions are ALL met, it qualifies as datapath flow. |
| 1585 | // 1. valid access_intf_id, onu_id, uni_id |
| 1586 | // 2. Valid tech_profile_id |
| 1587 | // 3. flow_type that is not MULTICAST |
| 1588 | // 4. Not a trap-to-host flow. |
| 1589 | bool datapathFlow = access_intf_id >= 0 && onu_id >= 0 && uni_id >= 0 && tech_profile_id > 0 |
| 1590 | && flow_type != multicast && !action.cmd().trap_to_host(); |
| 1591 | |
| 1592 | if (datapathFlow) { |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 1593 | const std::string inverse_flow_type = flow_type == upstream? downstream : upstream; |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1594 | symmetric_datapath_flow_id_map_key key(access_intf_id, onu_id, uni_id, tech_profile_id, inverse_flow_type); |
| 1595 | // Find the onu-uni mapping for the pon-gem key |
| 1596 | bcmos_fastlock_lock(&symmetric_datapath_flow_id_lock); |
| 1597 | auto it = symmetric_datapath_flow_id_map.find(key); |
| 1598 | bcmos_fastlock_unlock(&symmetric_datapath_flow_id_lock, 0); |
| 1599 | if (it != symmetric_datapath_flow_id_map.end()) { |
| 1600 | symmetric_voltha_flow_id = it->second; |
| 1601 | } |
| 1602 | } |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1603 | |
| 1604 | // The intf_id variable defaults to access(PON) interface ID. |
| 1605 | // For trap-from-nni flow where access interface ID is not valid , change it to NNI interface ID |
| 1606 | // This intf_id identifies the pool from which we get the flow_id |
| 1607 | uint32_t intf_id = access_intf_id; |
| 1608 | if (onu_id < 1) { |
| 1609 | onu_id = 1; |
| 1610 | } |
| 1611 | if (access_intf_id < 0) { |
| 1612 | intf_id = network_intf_id; |
| 1613 | } |
| 1614 | |
| 1615 | OPENOLT_LOG(INFO, openolt_log_id, "received flow add. voltha_flow_id=%lu, symmetric_voltha_flow_id=%lu, replication=%d\n", voltha_flow_id, symmetric_voltha_flow_id, replicate_flow) |
| 1616 | // This is the case of voltha_flow_id (not symmetric_voltha_flow_id) |
| 1617 | if (is_voltha_flow_installed(voltha_flow_id)) { |
| 1618 | OPENOLT_LOG(INFO, openolt_log_id, "voltha_flow_id=%lu, already installed\n", voltha_flow_id); |
| 1619 | return ::Status(grpc::StatusCode::ALREADY_EXISTS, "voltha-flow-already-installed"); |
| 1620 | } |
| 1621 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1622 | // This is the case of symmetric_voltha_flow_id |
| 1623 | // If symmetric_voltha_flow_id is available and valid in the Flow message, |
| 1624 | // check if it is installed, and use the corresponding device_flow_id |
| 1625 | if (symmetric_voltha_flow_id > 0 && is_voltha_flow_installed(symmetric_voltha_flow_id)) { // symmetric flow found |
| 1626 | OPENOLT_LOG(INFO, openolt_log_id, "symmetric flow and the symmetric flow is installed\n"); |
| 1627 | const device_flow_params *dev_fl_symm_params; |
| 1628 | dev_fl_symm_params = get_device_flow_params(symmetric_voltha_flow_id); |
| 1629 | if (dev_fl_symm_params == NULL) { |
| 1630 | OPENOLT_LOG(ERROR, openolt_log_id, "symmetric flow device params not found symm-voltha-flow=%lu voltha-flow=%lu\n", symmetric_voltha_flow_id, voltha_flow_id) |
| 1631 | return ::Status(grpc::StatusCode::INTERNAL, "symmetric-flow-details-not-found"); |
| 1632 | } |
| 1633 | |
| 1634 | if (!replicate_flow) { // No flow replication |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1635 | flow_id = dev_fl_symm_params[0].flow_id; |
| 1636 | gemport_id = dev_fl_symm_params[0].gemport_id; // overwrite the gemport with symmetric flow gemport |
| 1637 | // Should be same as what is coming in this request. |
| 1638 | enable_encryption = get_aes_flag_for_gem_port(gemport_to_aes, gemport_id); |
| 1639 | ::openolt::Classifier cl = ::openolt::Classifier(classifier); |
| 1640 | cl.set_o_pbits(dev_fl_symm_params[0].pbit); |
| 1641 | st = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, |
| 1642 | flow_type, alloc_id, network_intf_id, gemport_id, cl, |
| 1643 | action, priority, cookie, group_id, tech_profile_id, enable_encryption); |
| 1644 | if (st.error_code() != grpc::StatusCode::OK && st.error_code() != grpc::StatusCode::ALREADY_EXISTS) { |
| 1645 | OPENOLT_LOG(ERROR, openolt_log_id, "failed to install device flow=%u for voltha flow=%lu", flow_id, voltha_flow_id); |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1646 | free_flow_id(flow_id); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1647 | return st; |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1648 | } |
| 1649 | |
| 1650 | device_flow dev_fl; |
| 1651 | dev_fl.is_flow_replicated = false; |
| 1652 | dev_fl.symmetric_voltha_flow_id = symmetric_voltha_flow_id; |
| 1653 | dev_fl.voltha_flow_id = voltha_flow_id; |
Girish Gowdra | 72bb465 | 2022-01-18 17:04:30 -0800 | [diff] [blame] | 1654 | dev_fl.flow_type = flow_type; |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1655 | memcpy(dev_fl.params, dev_fl_symm_params, sizeof(device_flow_params)); |
| 1656 | // update voltha flow to cache |
| 1657 | update_voltha_flow_to_cache(voltha_flow_id, dev_fl); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1658 | } else { // Flow to be replicated |
| 1659 | OPENOLT_LOG(INFO, openolt_log_id,"symmetric flow and replication is needed\n"); |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 1660 | if (pbit_to_gemport.size() > NUMBER_OF_PBITS) { |
| 1661 | OPENOLT_LOG(ERROR, openolt_log_id, "invalid pbit-to-gemport map size=%lu", pbit_to_gemport.size()) |
| 1662 | return ::Status(grpc::StatusCode::OUT_OF_RANGE, "pbit-to-gemport-map-len-invalid-for-flow-replication"); |
| 1663 | } |
| 1664 | for (uint8_t i=0; i<pbit_to_gemport.size(); i++) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1665 | ::openolt::Classifier cl = ::openolt::Classifier(classifier); |
| 1666 | flow_id = dev_fl_symm_params[i].flow_id; |
| 1667 | gemport_id = dev_fl_symm_params[i].gemport_id; |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1668 | enable_encryption = get_aes_flag_for_gem_port(gemport_to_aes, gemport_id); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1669 | cl.set_o_pbits(dev_fl_symm_params[i].pbit); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1670 | st = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, |
Girish Gowdra | de65ab4 | 2020-12-17 23:08:43 -0800 | [diff] [blame] | 1671 | flow_type, alloc_id, network_intf_id, gemport_id, cl, |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1672 | action, priority, cookie, group_id, tech_profile_id, enable_encryption); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1673 | if (st.error_code() != grpc::StatusCode::OK && st.error_code() != grpc::StatusCode::ALREADY_EXISTS) { |
| 1674 | OPENOLT_LOG(ERROR, openolt_log_id, "failed to install device flow=%u for voltha flow=%lu. Undoing any device flows installed.", flow_id, voltha_flow_id); |
| 1675 | // On failure remove any successfully replicated flows installed so far for the voltha_flow_id |
| 1676 | if (i > 0) { |
| 1677 | for (int8_t j = i-1; j >= 0; j--) { |
| 1678 | flow_id = dev_fl_symm_params[j].flow_id; |
| 1679 | FlowRemove_(flow_id, flow_type); |
| 1680 | } |
| 1681 | } |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 1682 | // Note: We should not free the flow_ids here because the symmetric flow is already using that flow id. |
| 1683 | // A call from voltha adapter should invoke a flow remove and then the flow ids would be freed in the process in this particular case |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1684 | return st; |
| 1685 | } |
| 1686 | } |
| 1687 | device_flow dev_fl; |
| 1688 | dev_fl.is_flow_replicated = true; |
| 1689 | dev_fl.symmetric_voltha_flow_id = symmetric_voltha_flow_id; |
| 1690 | dev_fl.voltha_flow_id = voltha_flow_id; |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 1691 | dev_fl.total_replicated_flows = pbit_to_gemport.size(); |
Girish Gowdra | 72bb465 | 2022-01-18 17:04:30 -0800 | [diff] [blame] | 1692 | dev_fl.flow_type = flow_type; |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 1693 | memcpy(dev_fl.params, dev_fl_symm_params, sizeof(device_flow_params)*dev_fl.total_replicated_flows); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1694 | // update voltha flow to cache |
| 1695 | update_voltha_flow_to_cache(voltha_flow_id, dev_fl); |
| 1696 | } |
| 1697 | } else { // No symmetric flow found |
| 1698 | if (!replicate_flow) { // No flow replication |
| 1699 | OPENOLT_LOG(INFO, openolt_log_id, "not a symmetric flow and replication is not needed\n"); |
| 1700 | flow_id = get_flow_id(); |
| 1701 | if (flow_id == INVALID_FLOW_ID) { |
| 1702 | OPENOLT_LOG(ERROR, openolt_log_id, "could not allocated flow id for voltha-flow-id=%lu\n", voltha_flow_id); |
| 1703 | return ::Status(grpc::StatusCode::RESOURCE_EXHAUSTED, "flow-ids-exhausted"); |
| 1704 | } |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1705 | enable_encryption = get_aes_flag_for_gem_port(gemport_to_aes, gemport_id); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1706 | st = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1707 | flow_type, alloc_id, network_intf_id, gemport_id, classifier, |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1708 | action, priority, cookie, group_id, tech_profile_id, enable_encryption); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1709 | if (st.error_code() == grpc::StatusCode::OK) { |
| 1710 | device_flow dev_fl; |
| 1711 | dev_fl.is_flow_replicated = false; |
| 1712 | dev_fl.symmetric_voltha_flow_id = INVALID_FLOW_ID; // Invalid |
| 1713 | dev_fl.voltha_flow_id = voltha_flow_id; |
Girish Gowdra | 72bb465 | 2022-01-18 17:04:30 -0800 | [diff] [blame] | 1714 | dev_fl.flow_type = flow_type; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1715 | dev_fl.params[0].flow_id = flow_id; |
| 1716 | dev_fl.params[0].gemport_id = gemport_id; |
| 1717 | dev_fl.params[0].pbit = classifier.o_pbits(); |
| 1718 | // update voltha flow to cache |
| 1719 | update_voltha_flow_to_cache(voltha_flow_id, dev_fl); |
| 1720 | } else { |
| 1721 | // Free the flow id on failure |
| 1722 | free_flow_id(flow_id); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1723 | return st; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1724 | } |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1725 | } else { // Flow to be replicated |
| 1726 | OPENOLT_LOG(INFO, openolt_log_id,"not a symmetric flow and replication is needed\n"); |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 1727 | if (pbit_to_gemport.size() > NUMBER_OF_PBITS) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1728 | OPENOLT_LOG(ERROR, openolt_log_id, "invalid pbit-to-gemport map size=%lu", pbit_to_gemport.size()) |
| 1729 | return ::Status(grpc::StatusCode::OUT_OF_RANGE, "pbit-to-gemport-map-len-invalid-for-flow-replication"); |
| 1730 | } |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 1731 | uint16_t flow_ids[MAX_NUMBER_OF_REPLICATED_FLOWS]; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1732 | device_flow dev_fl; |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 1733 | if (get_flow_ids(pbit_to_gemport.size(), flow_ids)) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1734 | uint8_t cnt = 0; |
| 1735 | dev_fl.is_flow_replicated = true; |
| 1736 | dev_fl.voltha_flow_id = voltha_flow_id; |
| 1737 | dev_fl.symmetric_voltha_flow_id = INVALID_FLOW_ID; // invalid |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 1738 | dev_fl.total_replicated_flows = pbit_to_gemport.size(); |
Girish Gowdra | 72bb465 | 2022-01-18 17:04:30 -0800 | [diff] [blame] | 1739 | dev_fl.flow_type = flow_type; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1740 | for (google::protobuf::Map<unsigned int, unsigned int>::const_iterator it=pbit_to_gemport.begin(); it!=pbit_to_gemport.end(); it++) { |
| 1741 | dev_fl.params[cnt].flow_id = flow_ids[cnt]; |
| 1742 | dev_fl.params[cnt].pbit = it->first; |
| 1743 | dev_fl.params[cnt].gemport_id = it->second; |
| 1744 | |
| 1745 | ::openolt::Classifier cl = ::openolt::Classifier(classifier); |
| 1746 | flow_id = dev_fl.params[cnt].flow_id; |
| 1747 | gemport_id = dev_fl.params[cnt].gemport_id; |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1748 | enable_encryption = get_aes_flag_for_gem_port(gemport_to_aes, gemport_id); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1749 | cl.set_o_pbits(dev_fl.params[cnt].pbit); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1750 | st = FlowAdd_(access_intf_id, onu_id, uni_id, port_no, flow_id, |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1751 | flow_type, alloc_id, network_intf_id, gemport_id, cl, |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1752 | action, priority, cookie, group_id, tech_profile_id, enable_encryption); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1753 | if (st.error_code() != grpc::StatusCode::OK) { |
| 1754 | OPENOLT_LOG(ERROR, openolt_log_id, "failed to install device flow=%u for voltha flow=%lu. Undoing any device flows installed.", flow_id, voltha_flow_id); |
| 1755 | // Remove any successfully replicated flows installed so far for the voltha_flow_id |
| 1756 | if (cnt > 0) { |
| 1757 | for (int8_t j = cnt-1; j >= 0; j--) { |
| 1758 | flow_id = dev_fl.params[j].flow_id; |
| 1759 | FlowRemove_(flow_id, flow_type); |
| 1760 | } |
| 1761 | } |
| 1762 | // Free up all the flow IDs on failure |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 1763 | free_flow_ids(pbit_to_gemport.size(), flow_ids); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1764 | return st; |
| 1765 | } |
| 1766 | cnt++; |
| 1767 | } |
| 1768 | // On successful flow replication update voltha-flow-id to device-flow map to cache |
| 1769 | update_voltha_flow_to_cache(voltha_flow_id, dev_fl); |
| 1770 | } else { |
| 1771 | OPENOLT_LOG(ERROR, openolt_log_id, "could not allocate flow ids for replication voltha-flow-id=%lu\n", voltha_flow_id); |
| 1772 | return ::Status(grpc::StatusCode::RESOURCE_EXHAUSTED, "flow-ids-exhausted"); |
| 1773 | } |
| 1774 | } |
| 1775 | } |
| 1776 | |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 1777 | if (datapathFlow) { |
| 1778 | // Create the pon-gem to onu-uni mapping |
| 1779 | symmetric_datapath_flow_id_map_key key(access_intf_id, onu_id, uni_id, tech_profile_id, flow_type); |
| 1780 | bcmos_fastlock_lock(&symmetric_datapath_flow_id_lock); |
| 1781 | symmetric_datapath_flow_id_map[key] = voltha_flow_id; |
| 1782 | bcmos_fastlock_unlock(&symmetric_datapath_flow_id_lock, 0); |
| 1783 | } |
| 1784 | |
| 1785 | return st; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1786 | } |
| 1787 | |
| 1788 | |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1789 | Status FlowAdd_(int32_t access_intf_id, int32_t onu_id, int32_t uni_id, uint32_t port_no, |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1790 | uint32_t flow_id, const std::string flow_type, |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 1791 | int32_t alloc_id, int32_t network_intf_id, |
| 1792 | int32_t gemport_id, const ::openolt::Classifier& classifier, |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1793 | const ::openolt::Action& action, int32_t priority_value, uint64_t cookie, |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1794 | int32_t group_id, uint32_t tech_profile_id, bool aes_enabled) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1795 | bcmolt_flow_cfg cfg; |
| 1796 | bcmolt_flow_key key = { }; /**< Object key. */ |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1797 | int32_t o_vid = -1; |
| 1798 | bool single_tag = false; |
| 1799 | uint32_t ether_type = 0; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1800 | bcmolt_classifier c_val = { }; |
| 1801 | bcmolt_action a_val = { }; |
| 1802 | bcmolt_tm_queue_ref tm_val = { }; |
| 1803 | int tm_qmp_id, tm_q_set_id; |
Thiyagarajan Subramani | 8154d93 | 2019-11-13 05:29:06 -0500 | [diff] [blame] | 1804 | bcmolt_egress_qos_type qos_type; |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1805 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1806 | OPENOLT_LOG(INFO, openolt_log_id, "flow add received for flow_id=%u, flow_type=%s\n", flow_id, flow_type.c_str()); |
| 1807 | |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1808 | key.flow_id = flow_id; |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 1809 | if (flow_type == upstream) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1810 | key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM; |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 1811 | } else if (flow_type == downstream) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1812 | key.flow_type = BCMOLT_FLOW_TYPE_DOWNSTREAM; |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 1813 | } else if (flow_type == multicast) { |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1814 | key.flow_type = BCMOLT_FLOW_TYPE_MULTICAST; |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1815 | } else { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1816 | OPENOLT_LOG(ERROR, openolt_log_id, "Invalid flow type %s\n", flow_type.c_str()); |
Nicolas Palpacuer | 73222e0 | 2018-07-16 12:20:26 -0400 | [diff] [blame] | 1817 | return bcm_to_grpc_err(BCM_ERR_PARM, "Invalid flow type"); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1818 | } |
| 1819 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1820 | BCMOLT_CFG_INIT(&cfg, flow, key); |
| 1821 | BCMOLT_MSG_FIELD_SET(&cfg, cookie, cookie); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1822 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1823 | if (action.cmd().trap_to_host()) { |
Girish Gowdra | 1935e6a | 2020-10-31 21:48:22 -0700 | [diff] [blame] | 1824 | Status resp = handle_acl_rule_install(onu_id, flow_id, gemport_id, flow_type, access_intf_id, |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1825 | network_intf_id, classifier); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1826 | return resp; |
| 1827 | } |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1828 | |
| 1829 | if (key.flow_type != BCMOLT_FLOW_TYPE_MULTICAST) { |
| 1830 | |
| 1831 | if (access_intf_id >= 0 && network_intf_id >= 0) { |
| 1832 | if (key.flow_type == BCMOLT_FLOW_TYPE_UPSTREAM) { //upstream |
| 1833 | BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_PON); |
| 1834 | BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_id, access_intf_id); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1835 | BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_NNI); |
| 1836 | BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_id, network_intf_id); |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1837 | } else if (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM) { //downstream |
| 1838 | BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_NNI); |
| 1839 | BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_id, network_intf_id); |
| 1840 | BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_PON); |
| 1841 | BCMOLT_MSG_FIELD_SET(&cfg, egress_intf.intf_id, access_intf_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1842 | } |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1843 | } else { |
| 1844 | OPENOLT_LOG(ERROR, openolt_log_id, "flow network setting invalid\n"); |
| 1845 | return bcm_to_grpc_err(BCM_ERR_PARM, "flow network setting invalid"); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1846 | } |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1847 | |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1848 | if (onu_id >= ONU_ID_START) { |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1849 | BCMOLT_MSG_FIELD_SET(&cfg, onu_id, onu_id); |
| 1850 | } |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1851 | if (gemport_id >= GEM_PORT_ID_START) { |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1852 | BCMOLT_MSG_FIELD_SET(&cfg, svc_port_id, gemport_id); |
| 1853 | } |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 1854 | if (gemport_id >= GEM_PORT_ID_START && port_no != 0) { |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1855 | bcmos_fastlock_lock(&data_lock); |
| 1856 | if (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM) { |
| 1857 | port_to_flows[port_no].insert(key.flow_id); |
| 1858 | flowid_to_gemport[key.flow_id] = gemport_id; |
| 1859 | } |
| 1860 | else |
| 1861 | { |
| 1862 | flowid_to_port[key.flow_id] = port_no; |
| 1863 | } |
| 1864 | bcmos_fastlock_unlock(&data_lock, 0); |
| 1865 | } |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 1866 | |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1867 | if (priority_value >= 0) { |
| 1868 | BCMOLT_MSG_FIELD_SET(&cfg, priority, priority_value); |
| 1869 | } |
Girish Gowdra | 80b0fb9 | 2019-11-15 11:40:39 +0530 | [diff] [blame] | 1870 | |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1871 | } else { // MULTICAST FLOW |
| 1872 | if (group_id >= 0) { |
| 1873 | BCMOLT_MSG_FIELD_SET(&cfg, group_id, group_id); |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 1874 | } |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1875 | BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_type, BCMOLT_FLOW_INTERFACE_TYPE_NNI); |
| 1876 | BCMOLT_MSG_FIELD_SET(&cfg, ingress_intf.intf_id, network_intf_id); |
Shad Ansari | 39739bc | 2018-09-13 21:38:37 +0000 | [diff] [blame] | 1877 | } |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1878 | |
| 1879 | { |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1880 | if (classifier.eth_type()) { |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1881 | ether_type = classifier.eth_type(); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1882 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify ether_type 0x%04x\n", classifier.eth_type()); |
| 1883 | BCMOLT_FIELD_SET(&c_val, classifier, ether_type, classifier.eth_type()); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1884 | } |
| 1885 | |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 1886 | if (classifier.dst_mac().size() > 0) { |
| 1887 | bcmos_mac_address d_mac = {}; |
| 1888 | bcmos_mac_address_init(&d_mac); |
| 1889 | memcpy(d_mac.u8, classifier.dst_mac().data(), sizeof(d_mac.u8)); |
| 1890 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify dst_mac %02x:%02x:%02x:%02x:%02x:%02x\n", d_mac.u8[0], |
| 1891 | d_mac.u8[1], d_mac.u8[2], d_mac.u8[3], d_mac.u8[4], d_mac.u8[5]); |
| 1892 | BCMOLT_FIELD_SET(&c_val, classifier, dst_mac, d_mac); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1893 | } |
| 1894 | |
Girish Gowdra | f83e17a | 2022-02-16 16:27:00 -0800 | [diff] [blame] | 1895 | if (classifier.src_mac().size() > 0) { |
| 1896 | bcmos_mac_address s_mac = {}; |
| 1897 | bcmos_mac_address_init(&s_mac); |
| 1898 | memcpy(s_mac.u8, classifier.src_mac().data(), sizeof(s_mac.u8)); |
| 1899 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify src_mac %02x:%02x:%02x:%02x:%02x:%02x\n", s_mac.u8[0], |
| 1900 | s_mac.u8[1], s_mac.u8[2], s_mac.u8[3], s_mac.u8[4], s_mac.u8[5]); |
| 1901 | BCMOLT_FIELD_SET(&c_val, classifier, src_mac, s_mac); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1902 | } |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1903 | |
| 1904 | if (classifier.ip_proto()) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1905 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify ip_proto %d\n", classifier.ip_proto()); |
| 1906 | BCMOLT_FIELD_SET(&c_val, classifier, ip_proto, classifier.ip_proto()); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1907 | } |
| 1908 | |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1909 | if (classifier.dst_ip()) { |
Girish Gowdra | f7feb4b | 2021-01-08 16:08:52 -0800 | [diff] [blame] | 1910 | bcmos_ipv4_address d_ip = {}; |
| 1911 | bcmos_ipv4_address_init(&d_ip); |
| 1912 | d_ip.u32 = classifier.dst_ip(); |
| 1913 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify dst_ip %04x\n", d_ip.u32); |
| 1914 | BCMOLT_FIELD_SET(&c_val, classifier, dst_ip, d_ip); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1915 | } |
| 1916 | |
Girish Gowdra | f7feb4b | 2021-01-08 16:08:52 -0800 | [diff] [blame] | 1917 | /* |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1918 | if (classifier.src_ip()) { |
Craig Lutgen | 1951231 | 2018-11-02 10:14:46 -0500 | [diff] [blame] | 1919 | BCMBAL_ATTRIBUTE_PROP_SET(&val, classifier, src_ip, classifier.src_ip()); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1920 | } |
| 1921 | */ |
| 1922 | |
| 1923 | if (classifier.src_port()) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1924 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify src_port %d\n", classifier.src_port()); |
| 1925 | BCMOLT_FIELD_SET(&c_val, classifier, src_port, classifier.src_port()); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1926 | } |
| 1927 | |
| 1928 | if (classifier.dst_port()) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1929 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify dst_port %d\n", classifier.dst_port()); |
| 1930 | BCMOLT_FIELD_SET(&c_val, classifier, dst_port, classifier.dst_port()); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1931 | } |
| 1932 | |
| 1933 | if (!classifier.pkt_tag_type().empty()) { |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1934 | if (classifier.o_vid()) { |
| 1935 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify o_vid %d\n", classifier.o_vid()); |
| 1936 | BCMOLT_FIELD_SET(&c_val, classifier, o_vid, classifier.o_vid()); |
| 1937 | } |
| 1938 | |
| 1939 | if (classifier.i_vid()) { |
| 1940 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify i_vid %d\n", classifier.i_vid()); |
| 1941 | BCMOLT_FIELD_SET(&c_val, classifier, i_vid, classifier.i_vid()); |
| 1942 | } |
| 1943 | |
| 1944 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify tag_type %s\n", classifier.pkt_tag_type().c_str()); |
| 1945 | if (classifier.pkt_tag_type().compare("untagged") == 0) { |
| 1946 | BCMOLT_FIELD_SET(&c_val, classifier, pkt_tag_type, BCMOLT_PKT_TAG_TYPE_UNTAGGED); |
| 1947 | } else if (classifier.pkt_tag_type().compare("single_tag") == 0) { |
| 1948 | BCMOLT_FIELD_SET(&c_val, classifier, pkt_tag_type, BCMOLT_PKT_TAG_TYPE_SINGLE_TAG); |
| 1949 | single_tag = true; |
| 1950 | |
| 1951 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify o_pbits 0x%x\n", classifier.o_pbits()); |
Girish Gowdra | 7bcfaf6 | 2020-02-17 19:17:20 +0530 | [diff] [blame] | 1952 | // OpenOlt adapter will send 0xFF in case of no pbit classification |
| 1953 | // If it is any other value (0 to 7), it is for outer pbit classification. |
| 1954 | // OpenFlow protocol does not provide inner pbit classification (in case of double tagged packets), |
| 1955 | // and VOLTHA has not used any workaround to solve this problem (for ex: use metadata field). |
| 1956 | // Also there exists no use case for i-pbit classification, so we can safely ignore this for now. |
| 1957 | if(0xFF != classifier.o_pbits()){ |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1958 | BCMOLT_FIELD_SET(&c_val, classifier, o_pbits, classifier.o_pbits()); |
Girish Gowdra | 80b0fb9 | 2019-11-15 11:40:39 +0530 | [diff] [blame] | 1959 | } |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1960 | } else if (classifier.pkt_tag_type().compare("double_tag") == 0) { |
| 1961 | BCMOLT_FIELD_SET(&c_val, classifier, pkt_tag_type, BCMOLT_PKT_TAG_TYPE_DOUBLE_TAG); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 1962 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1963 | OPENOLT_LOG(DEBUG, openolt_log_id, "classify o_pbits 0x%x\n", classifier.o_pbits()); |
Girish Gowdra | 7bcfaf6 | 2020-02-17 19:17:20 +0530 | [diff] [blame] | 1964 | // Same comments as in case of "single_tag" packets. |
| 1965 | // 0xFF means no pbit classification, otherwise a valid PCP (0 to 7). |
| 1966 | if(0xFF != classifier.o_pbits()){ |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1967 | BCMOLT_FIELD_SET(&c_val, classifier, o_pbits, classifier.o_pbits()); |
Girish Gowdra | 80b0fb9 | 2019-11-15 11:40:39 +0530 | [diff] [blame] | 1968 | } |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1969 | } |
| 1970 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 1971 | BCMOLT_MSG_FIELD_SET(&cfg, classifier, c_val); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1972 | } |
| 1973 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1974 | const ::openolt::ActionCmd& cmd = action.cmd(); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1975 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1976 | if (cmd.add_outer_tag()) { |
| 1977 | OPENOLT_LOG(DEBUG, openolt_log_id, "action add o_tag\n"); |
| 1978 | BCMOLT_FIELD_SET(&a_val, action, cmds_bitmask, BCMOLT_ACTION_CMD_ID_ADD_OUTER_TAG); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 1979 | } |
| 1980 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1981 | if (cmd.remove_outer_tag()) { |
| 1982 | OPENOLT_LOG(DEBUG, openolt_log_id, "action pop o_tag\n"); |
| 1983 | BCMOLT_FIELD_SET(&a_val, action, cmds_bitmask, BCMOLT_ACTION_CMD_ID_REMOVE_OUTER_TAG); |
| 1984 | } |
Girish Gowdra | ddf9a16 | 2020-01-27 12:56:27 +0530 | [diff] [blame] | 1985 | |
Girish Gowdra | f83e17a | 2022-02-16 16:27:00 -0800 | [diff] [blame] | 1986 | if (cmd.translate_outer_tag()) { |
| 1987 | OPENOLT_LOG(DEBUG, openolt_log_id, "action translate o_tag\n"); |
| 1988 | BCMOLT_FIELD_SET(&a_val, action, cmds_bitmask, BCMOLT_ACTION_CMD_ID_XLATE_OUTER_TAG); |
| 1989 | } |
| 1990 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 1991 | if (action.o_vid()) { |
| 1992 | OPENOLT_LOG(DEBUG, openolt_log_id, "action o_vid=%d\n", action.o_vid()); |
| 1993 | o_vid = action.o_vid(); |
| 1994 | BCMOLT_FIELD_SET(&a_val, action, o_vid, action.o_vid()); |
| 1995 | } |
| 1996 | |
| 1997 | if (action.o_pbits()) { |
| 1998 | OPENOLT_LOG(DEBUG, openolt_log_id, "action o_pbits=0x%x\n", action.o_pbits()); |
| 1999 | BCMOLT_FIELD_SET(&a_val, action, o_pbits, action.o_pbits()); |
| 2000 | } |
Girish Gowdra | ddf9a16 | 2020-01-27 12:56:27 +0530 | [diff] [blame] | 2001 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2002 | if (action.i_vid()) { |
| 2003 | OPENOLT_LOG(DEBUG, openolt_log_id, "action i_vid=%d\n", action.i_vid()); |
| 2004 | BCMOLT_FIELD_SET(&a_val, action, i_vid, action.i_vid()); |
| 2005 | } |
| 2006 | |
| 2007 | if (action.i_pbits()) { |
| 2008 | OPENOLT_LOG(DEBUG, openolt_log_id, "action i_pbits=0x%x\n", action.i_pbits()); |
| 2009 | BCMOLT_FIELD_SET(&a_val, action, i_pbits, action.i_pbits()); |
| 2010 | } |
Girish Gowdra | ddf9a16 | 2020-01-27 12:56:27 +0530 | [diff] [blame] | 2011 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2012 | BCMOLT_MSG_FIELD_SET(&cfg, action, a_val); |
| 2013 | |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 2014 | if ((access_intf_id >= 0) && (onu_id >= ONU_ID_START)) { |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2015 | qos_type = get_qos_type(access_intf_id, onu_id, uni_id); |
| 2016 | if (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM) { |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2017 | tm_val.sched_id = get_tm_sched_id(access_intf_id, onu_id, uni_id, downstream, tech_profile_id); |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 2018 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2019 | if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) { |
| 2020 | // Queue 0 on DS subscriber scheduler |
| 2021 | tm_val.queue_id = 0; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2022 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2023 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, qos_type); |
| 2024 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| 2025 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.fixed_queue.queue_id, tm_val.queue_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2026 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2027 | OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, queue_id = %d, sched_id = %d, intf_type %s\n", \ |
| 2028 | downstream.c_str(), tm_val.queue_id, tm_val.sched_id, \ |
| 2029 | GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2030 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2031 | } else if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| 2032 | /* Fetch TM QMP ID mapped to DS subscriber scheduler */ |
| 2033 | tm_qmp_id = tm_q_set_id = get_tm_qmp_id(tm_val.sched_id, access_intf_id, onu_id, uni_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2034 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2035 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, qos_type); |
| 2036 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| 2037 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.priority_to_queue.tm_qmp_id, tm_qmp_id); |
| 2038 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.priority_to_queue.tm_q_set_id, tm_q_set_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2039 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2040 | OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, q_set_id = %d, sched_id = %d, intf_type %s\n", \ |
| 2041 | downstream.c_str(), tm_q_set_id, tm_val.sched_id, \ |
| 2042 | GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
| 2043 | } |
| 2044 | } else if (key.flow_type == BCMOLT_FLOW_TYPE_UPSTREAM) { |
| 2045 | // NNI Scheduler ID |
| 2046 | tm_val.sched_id = get_default_tm_sched_id(network_intf_id, upstream); |
| 2047 | if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) { |
| 2048 | // Queue 0 on NNI scheduler |
| 2049 | tm_val.queue_id = 0; |
| 2050 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, qos_type); |
| 2051 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| 2052 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.fixed_queue.queue_id, tm_val.queue_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2053 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2054 | OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, queue_id = %d, sched_id = %d, intf_type %s\n", \ |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2055 | upstream.c_str(), tm_val.queue_id, tm_val.sched_id, \ |
| 2056 | GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
| 2057 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2058 | } else if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| 2059 | /* Fetch TM QMP ID mapped to US NNI scheduler */ |
| 2060 | tm_qmp_id = tm_q_set_id = get_tm_qmp_id(tm_val.sched_id, access_intf_id, onu_id, uni_id); |
| 2061 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, qos_type); |
| 2062 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| 2063 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.priority_to_queue.tm_qmp_id, tm_qmp_id); |
| 2064 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.priority_to_queue.tm_q_set_id, tm_q_set_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2065 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2066 | OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, q_set_id = %d, sched_id = %d, intf_type %s\n", \ |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2067 | upstream.c_str(), tm_q_set_id, tm_val.sched_id, \ |
| 2068 | GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2069 | } |
Shad Ansari | 39739bc | 2018-09-13 21:38:37 +0000 | [diff] [blame] | 2070 | } |
Girish Gowdra | 80b0fb9 | 2019-11-15 11:40:39 +0530 | [diff] [blame] | 2071 | } else { |
| 2072 | tm_val.sched_id = get_default_tm_sched_id(network_intf_id, upstream); |
| 2073 | tm_val.queue_id = 0; |
| 2074 | |
| 2075 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.type, BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE); |
| 2076 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.tm_sched.id, tm_val.sched_id); |
| 2077 | BCMOLT_MSG_FIELD_SET(&cfg , egress_qos.u.fixed_queue.queue_id, tm_val.queue_id); |
| 2078 | |
| 2079 | OPENOLT_LOG(DEBUG, openolt_log_id, "direction = %s, queue_id = %d, sched_id = %d, intf_type %s\n", \ |
| 2080 | flow_type.c_str(), tm_val.queue_id, tm_val.sched_id, \ |
| 2081 | GET_FLOW_INTERFACE_TYPE(cfg.data.ingress_intf.intf_type)); |
Shad Ansari | 0610195 | 2018-07-25 00:22:09 +0000 | [diff] [blame] | 2082 | } |
| 2083 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2084 | BCMOLT_MSG_FIELD_SET(&cfg, state, BCMOLT_FLOW_STATE_ENABLE); |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2085 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2086 | #ifndef SCALE_AND_PERF |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2087 | // BAL 3.1 supports statistics only for unicast flows. |
| 2088 | if (key.flow_type != BCMOLT_FLOW_TYPE_MULTICAST) { |
| 2089 | BCMOLT_MSG_FIELD_SET(&cfg, statistics, BCMOLT_CONTROL_STATE_ENABLE); |
| 2090 | } |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2091 | #endif // SCALE_AND_PERF |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2092 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2093 | #ifndef SCALE_AND_PERF |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2094 | #ifdef FLOW_CHECKER |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2095 | //Flow Checker, To avoid duplicate flow. |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2096 | if (flow_id_counters != 0) { |
| 2097 | bool b_duplicate_flow = false; |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2098 | std::map<flow_pair, int>::iterator it; |
| 2099 | |
| 2100 | for(it = flow_map.begin(); it != flow_map.end(); it++) { |
| 2101 | b_duplicate_flow = (cfg.data.onu_id == get_flow_status(it->first.first, it->first.second, ONU_ID)) && \ |
| 2102 | (key.flow_type == it->first.second) && \ |
| 2103 | (cfg.data.svc_port_id == get_flow_status(it->first.first, it->first.second, SVC_PORT_ID)) && \ |
| 2104 | (cfg.data.priority == get_flow_status(it->first.first, it->first.second, PRIORITY)) && \ |
| 2105 | (cfg.data.cookie == get_flow_status(it->first.first, it->first.second, COOKIE)) && \ |
| 2106 | (cfg.data.ingress_intf.intf_type == get_flow_status(it->first.first, it->first.second, INGRESS_INTF_TYPE)) && \ |
| 2107 | (cfg.data.ingress_intf.intf_id == get_flow_status(it->first.first, it->first.second, INGRESS_INTF_ID)) && \ |
| 2108 | (cfg.data.egress_intf.intf_type == get_flow_status(it->first.first, it->first.second, EGRESS_INTF_TYPE)) && \ |
| 2109 | (cfg.data.egress_intf.intf_id == get_flow_status(it->first.first, it->first.second, EGRESS_INTF_ID)) && \ |
| 2110 | (c_val.o_vid == get_flow_status(it->first.first, it->first.second, CLASSIFIER_O_VID)) && \ |
| 2111 | (c_val.o_pbits == get_flow_status(it->first.first, it->first.second, CLASSIFIER_O_PBITS)) && \ |
| 2112 | (c_val.i_vid == get_flow_status(it->first.first, it->first.second, CLASSIFIER_I_VID)) && \ |
| 2113 | (c_val.i_pbits == get_flow_status(it->first.first, it->first.second, CLASSIFIER_I_PBITS)) && \ |
| 2114 | (c_val.ether_type == get_flow_status(it->first.first, it->first.second, CLASSIFIER_ETHER_TYPE)) && \ |
| 2115 | (c_val.ip_proto == get_flow_status(it->first.first, it->first.second, CLASSIFIER_IP_PROTO)) && \ |
| 2116 | (c_val.src_port == get_flow_status(it->first.first, it->first.second, CLASSIFIER_SRC_PORT)) && \ |
| 2117 | (c_val.dst_port == get_flow_status(it->first.first, it->first.second, CLASSIFIER_DST_PORT)) && \ |
| 2118 | (c_val.pkt_tag_type == get_flow_status(it->first.first, it->first.second, CLASSIFIER_PKT_TAG_TYPE)) && \ |
| 2119 | (cfg.data.egress_qos.type == get_flow_status(it->first.first, it->first.second, EGRESS_QOS_TYPE)) && \ |
| 2120 | (cfg.data.egress_qos.u.fixed_queue.queue_id == get_flow_status(it->first.first, it->first.second, EGRESS_QOS_QUEUE_ID)) && \ |
| 2121 | (cfg.data.egress_qos.tm_sched.id == get_flow_status(it->first.first, it->first.second, EGRESS_QOS_TM_SCHED_ID)) && \ |
| 2122 | (a_val.cmds_bitmask == get_flow_status(it->first.first, it->first.second, ACTION_CMDS_BITMASK)) && \ |
| 2123 | (a_val.o_vid == get_flow_status(it->first.first, it->first.second, ACTION_O_VID)) && \ |
| 2124 | (a_val.i_vid == get_flow_status(it->first.first, it->first.second, ACTION_I_VID)) && \ |
| 2125 | (a_val.o_pbits == get_flow_status(it->first.first, it->first.second, ACTION_O_PBITS)) && \ |
| 2126 | (a_val.i_pbits == get_flow_status(it->first.first, it->first.second, ACTION_I_PBITS)) && \ |
| 2127 | (cfg.data.state == get_flow_status(it->first.first, it->first.second, STATE)) && \ |
| 2128 | (cfg.data.group_id == get_flow_status(it->first.first, it->first.second, GROUP_ID)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2129 | #ifdef SHOW_FLOW_PARAM |
| 2130 | // Flow Parameter |
| 2131 | FLOW_PARAM_LOG(); |
| 2132 | #endif |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2133 | if (b_duplicate_flow) { |
| 2134 | FLOW_LOG(WARNING, "Flow duplicate", 0); |
| 2135 | return bcm_to_grpc_err(BCM_ERR_ALREADY, "flow exists"); |
| 2136 | } |
| 2137 | } |
| 2138 | } |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2139 | #endif // FLOW_CHECKER |
| 2140 | #endif // SCALE_AND_PERF |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2141 | |
| 2142 | bcmos_errno err = bcmolt_cfg_set(dev_id, &cfg.hdr); |
| 2143 | if (err) { |
| 2144 | FLOW_LOG(ERROR, "Flow add failed", err); |
| 2145 | return bcm_to_grpc_err(err, "flow add failed"); |
| 2146 | } else { |
| 2147 | FLOW_LOG(INFO, "Flow add ok", err); |
| 2148 | bcmos_fastlock_lock(&data_lock); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2149 | flow_map[std::pair<int, int>(key.flow_id,key.flow_type)] = flow_map.size(); |
| 2150 | flow_id_counters = flow_map.size(); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2151 | bcmos_fastlock_unlock(&data_lock, 0); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2152 | |
| 2153 | } |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 2154 | |
| 2155 | /* |
| 2156 | Enable AES encryption on GEM ports if they are used in downstream unicast flows. |
| 2157 | Rationale: We can't do upstream encryption in GPON. This change addresses the common denominator (and also minimum viable) |
| 2158 | use case for both technologies which is downstream unicast GEM port encryption. Since the downstream traffic is inherently |
| 2159 | broadcast to all the ONUs behind a PON port, encrypting the individual subscriber traffic in this direction is important |
| 2160 | and considered good enough in terms of security (See Section 12.1 of G.984.3). For upstream unicast and downstream multicast |
| 2161 | GEM encryption, we need to make additional changes specific to XGSPON. This will be done as a future work. |
| 2162 | */ |
| 2163 | if (aes_enabled && (access_intf_id >= 0) && (gemport_id >= GEM_PORT_ID_START) && (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM)) { |
| 2164 | OPENOLT_LOG(INFO, openolt_log_id, "Setting encryption on pon = %d gem_port = %d through flow_id = %d\n", access_intf_id, gemport_id, flow_id); |
Thiyagarajan Subramani | 19168f5 | 2021-05-25 23:26:41 +0530 | [diff] [blame] | 2165 | enable_encryption_for_gem_port(access_intf_id, gemport_id, board_technology); |
Burak Gurdag | a052359 | 2021-02-24 15:17:47 +0000 | [diff] [blame] | 2166 | } else { |
| 2167 | OPENOLT_LOG(WARNING, openolt_log_id, "Flow config for flow_id = %d is not suitable for setting downstream encryption on pon = %d gem_port = %d. No action taken.\n", flow_id, access_intf_id, gemport_id); |
| 2168 | } |
| 2169 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2170 | return Status::OK; |
| 2171 | } |
| 2172 | |
| 2173 | Status FlowRemoveWrapper_(const ::openolt::Flow* request) { |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 2174 | int32_t access_intf_id = request->access_intf_id(); |
| 2175 | int32_t onu_id = request->onu_id(); |
| 2176 | int32_t uni_id = request->uni_id(); |
| 2177 | uint32_t tech_profile_id = request->tech_profile_id(); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2178 | uint64_t voltha_flow_id = request->flow_id(); |
| 2179 | Status st; |
| 2180 | |
| 2181 | // If Voltha flow is not installed, return fail |
| 2182 | if (! is_voltha_flow_installed(voltha_flow_id)) { |
| 2183 | OPENOLT_LOG(ERROR, openolt_log_id, "voltha_flow_id=%lu not found\n", voltha_flow_id); |
| 2184 | return ::Status(grpc::StatusCode::NOT_FOUND, "voltha-flow-not-found"); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2185 | } |
Nicolas Palpacuer | 0f19b1a | 2018-06-07 17:29:31 -0400 | [diff] [blame] | 2186 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2187 | const device_flow *dev_fl = get_device_flow(voltha_flow_id); |
| 2188 | if (dev_fl == NULL) { |
| 2189 | OPENOLT_LOG(ERROR, openolt_log_id, "device flow for voltha_flow_id=%lu in the cache is NULL\n", voltha_flow_id); |
| 2190 | return ::Status(grpc::StatusCode::INTERNAL, "device-flow-null-in-cache"); |
| 2191 | } |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2192 | std::string flow_type = dev_fl->flow_type; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2193 | if (dev_fl->is_flow_replicated) { |
| 2194 | // Note: Here we are ignoring FlowRemove failures |
Girish Gowdra | 52997cc | 2022-06-02 20:58:50 -0700 | [diff] [blame] | 2195 | for (int i=0; i<dev_fl->total_replicated_flows; i++) { |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2196 | st = FlowRemove_(dev_fl->params[i].flow_id, flow_type); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2197 | if (st.error_code() == grpc::StatusCode::OK) { |
| 2198 | free_flow_id(dev_fl->params[i].flow_id); |
| 2199 | } |
| 2200 | } |
| 2201 | } else { |
| 2202 | // Note: Here we are ignoring FlowRemove failures |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2203 | st = FlowRemove_(dev_fl->params[0].flow_id, flow_type); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2204 | if (st.error_code() == grpc::StatusCode::OK) { |
| 2205 | free_flow_id(dev_fl->params[0].flow_id); |
| 2206 | } |
| 2207 | } |
| 2208 | // remove the flow from cache on voltha flow removal |
| 2209 | remove_voltha_flow_from_cache(voltha_flow_id); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 2210 | |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2211 | symmetric_datapath_flow_id_map_key key(access_intf_id, onu_id, uni_id, tech_profile_id, flow_type); |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 2212 | // Remove onu-uni mapping for the pon-gem key |
| 2213 | bcmos_fastlock_lock(&symmetric_datapath_flow_id_lock); |
| 2214 | symmetric_datapath_flow_id_map.erase(key); |
| 2215 | bcmos_fastlock_unlock(&symmetric_datapath_flow_id_lock, 0); |
| 2216 | |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 2217 | return Status::OK; |
| 2218 | } |
| 2219 | |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2220 | Status FlowRemove_(uint32_t flow_id, const std::string flow_type) { |
| 2221 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2222 | bcmolt_flow_cfg cfg; |
| 2223 | bcmolt_flow_key key = { }; |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2224 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2225 | key.flow_id = (bcmolt_flow_id) flow_id; |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2226 | key.flow_id = flow_id; |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2227 | if (flow_type == upstream) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2228 | key.flow_type = BCMOLT_FLOW_TYPE_UPSTREAM; |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2229 | } else if (flow_type == downstream) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2230 | key.flow_type = BCMOLT_FLOW_TYPE_DOWNSTREAM; |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2231 | } else if(flow_type == multicast) { |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2232 | key.flow_type = BCMOLT_FLOW_TYPE_MULTICAST; |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2233 | } else { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2234 | OPENOLT_LOG(WARNING, openolt_log_id, "Invalid flow type %s\n", flow_type.c_str()); |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2235 | return bcm_to_grpc_err(BCM_ERR_PARM, "Invalid flow type"); |
| 2236 | } |
| 2237 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2238 | OPENOLT_LOG(INFO, openolt_log_id, "flow remove received for flow_id=%u, flow_type=%s\n", |
| 2239 | flow_id, flow_type.c_str()); |
| 2240 | |
Girish Gowdra | 1935e6a | 2020-10-31 21:48:22 -0700 | [diff] [blame] | 2241 | bcmos_fastlock_lock(&acl_packet_trap_handler_lock); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2242 | flow_id_flow_direction fl_id_fl_dir(flow_id, flow_type); |
| 2243 | int32_t gemport_id = -1; |
| 2244 | int32_t intf_id = -1; |
| 2245 | int16_t acl_id = -1; |
| 2246 | if (flow_to_acl_map.count(fl_id_fl_dir) > 0) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2247 | |
| 2248 | acl_id_intf_id ac_id_if_id = flow_to_acl_map[fl_id_fl_dir]; |
| 2249 | acl_id = std::get<0>(ac_id_if_id); |
| 2250 | intf_id = std::get<1>(ac_id_if_id); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2251 | // cleanup acl only if it is a valid acl. If not valid acl, it may be datapath flow. |
| 2252 | if (acl_id >= 0) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2253 | Status resp = handle_acl_rule_cleanup(acl_id, intf_id, flow_type); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2254 | if (resp.ok()) { |
| 2255 | OPENOLT_LOG(INFO, openolt_log_id, "acl removed ok for flow_id = %u with acl_id = %d\n", flow_id, acl_id); |
| 2256 | flow_to_acl_map.erase(fl_id_fl_dir); |
Girish Gowdra | 1935e6a | 2020-10-31 21:48:22 -0700 | [diff] [blame] | 2257 | |
| 2258 | // When flow is being removed, extract the value corresponding to flow_id from trap_to_host_pkt_info_with_vlan_for_flow_id if it exists |
| 2259 | if (trap_to_host_pkt_info_with_vlan_for_flow_id.count(flow_id) > 0) { |
| 2260 | trap_to_host_pkt_info_with_vlan pkt_info_with_vlan = trap_to_host_pkt_info_with_vlan_for_flow_id[flow_id]; |
| 2261 | // Formulate the trap_to_host_pkt_info tuple key |
| 2262 | trap_to_host_pkt_info pkt_info(std::get<0>(pkt_info_with_vlan), |
| 2263 | std::get<1>(pkt_info_with_vlan), |
| 2264 | std::get<2>(pkt_info_with_vlan), |
| 2265 | std::get<3>(pkt_info_with_vlan)); |
| 2266 | // Extract the value corresponding to trap_to_host_pkt_info key from trap_to_host_vlan_ids_for_trap_to_host_pkt_info |
| 2267 | // The value is a list of vlan_ids for the given trap_to_host_pkt_info key |
| 2268 | // Remove the vlan_id from the list that corresponded to the flow being removed. |
| 2269 | if (trap_to_host_vlan_ids_for_trap_to_host_pkt_info.count(pkt_info) > 0) { |
| 2270 | trap_to_host_vlan_ids_for_trap_to_host_pkt_info[pkt_info].remove(std::get<4>(pkt_info_with_vlan)); |
| 2271 | } else { |
| 2272 | OPENOLT_LOG(ERROR, openolt_log_id, "trap-to-host with intf_type = %d, intf_id = %d, pkt_type = %d gemport_id = %d not found in trap_to_host_vlan_ids_for_trap_to_host_pkt_info map", |
| 2273 | std::get<0>(pkt_info_with_vlan), std::get<1>(pkt_info_with_vlan), std::get<2>(pkt_info_with_vlan), std::get<3>(pkt_info_with_vlan)); |
| 2274 | } |
| 2275 | |
| 2276 | } else { |
| 2277 | OPENOLT_LOG(ERROR, openolt_log_id, "flow id = %u not found in trap_to_host_pkt_info_with_vlan_for_flow_id map", flow_id); |
| 2278 | } |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2279 | } else { |
| 2280 | OPENOLT_LOG(ERROR, openolt_log_id, "acl remove error for flow_id = %u with acl_id = %d\n", flow_id, acl_id); |
| 2281 | } |
Girish Gowdra | 1935e6a | 2020-10-31 21:48:22 -0700 | [diff] [blame] | 2282 | bcmos_fastlock_unlock(&acl_packet_trap_handler_lock, 0); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2283 | return resp; |
| 2284 | } |
| 2285 | } |
Girish Gowdra | 1935e6a | 2020-10-31 21:48:22 -0700 | [diff] [blame] | 2286 | bcmos_fastlock_unlock(&acl_packet_trap_handler_lock, 0); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2287 | |
Girish Gowdra | 1935e6a | 2020-10-31 21:48:22 -0700 | [diff] [blame] | 2288 | bcmos_fastlock_lock(&data_lock); |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 2289 | uint32_t port_no = flowid_to_port[key.flow_id]; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2290 | if (key.flow_type == BCMOLT_FLOW_TYPE_DOWNSTREAM) { |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 2291 | flowid_to_gemport.erase(key.flow_id); |
| 2292 | port_to_flows[port_no].erase(key.flow_id); |
| 2293 | if (port_to_flows[port_no].empty()) port_to_flows.erase(port_no); |
| 2294 | } |
| 2295 | else |
| 2296 | { |
| 2297 | flowid_to_port.erase(key.flow_id); |
| 2298 | } |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2299 | bcmos_fastlock_unlock(&data_lock, 0); |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 2300 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2301 | BCMOLT_CFG_INIT(&cfg, flow, key); |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2302 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2303 | bcmos_errno err = bcmolt_cfg_clear(dev_id, &cfg.hdr); |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2304 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2305 | OPENOLT_LOG(ERROR, openolt_log_id, "Error while removing %s flow, flow_id=%d, err = %s (%d)\n", flow_type.c_str(), flow_id, cfg.hdr.hdr.err_text, err); |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2306 | return Status(grpc::StatusCode::INTERNAL, "Failed to remove flow"); |
| 2307 | } |
| 2308 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2309 | bcmos_fastlock_lock(&data_lock); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2310 | if (flow_id_counters != 0) { |
| 2311 | std::map<flow_pair, int>::iterator it; |
| 2312 | for(it = flow_map.begin(); it != flow_map.end(); it++) { |
| 2313 | if (it->first.first == flow_id && it->first.second == key.flow_type) { |
| 2314 | flow_id_counters -= 1; |
| 2315 | flow_map.erase(it); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2316 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2317 | } |
| 2318 | } |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2319 | OPENOLT_LOG(INFO, openolt_log_id, "Flow %d, %s removed\n", flow_id, flow_type.c_str()); |
| 2320 | |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2321 | flow_to_acl_map.erase(fl_id_fl_dir); |
| 2322 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2323 | bcmos_fastlock_unlock(&data_lock, 0); |
| 2324 | |
Nicolas Palpacuer | edfaa0c | 2018-07-05 15:05:27 -0400 | [diff] [blame] | 2325 | return Status::OK; |
| 2326 | } |
| 2327 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2328 | bcmos_errno CreateDefaultSched(uint32_t intf_id, const std::string direction) { |
| 2329 | bcmos_errno err; |
| 2330 | bcmolt_tm_sched_cfg tm_sched_cfg; |
| 2331 | bcmolt_tm_sched_key tm_sched_key = {.id = 1}; |
| 2332 | tm_sched_key.id = get_default_tm_sched_id(intf_id, direction); |
| 2333 | |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 2334 | //check TM scheduler has configured or not |
| 2335 | BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key); |
| 2336 | BCMOLT_MSG_FIELD_GET(&tm_sched_cfg, state); |
Thiyagarajan Subramani | 6dc2005 | 2019-12-05 09:06:36 -0500 | [diff] [blame] | 2337 | #ifdef TEST_MODE |
| 2338 | // It is impossible to mock the setting of tm_sched_cfg.data.state because |
| 2339 | // the actual bcmolt_cfg_get passes the address of tm_sched_cfg.hdr and we cannot |
| 2340 | // set the tm_sched_cfg.data.state. So a new stub function is created and address |
| 2341 | // of tm_sched_cfg is passed. This is one-of case where we need to add test specific |
| 2342 | // code in production code. |
| 2343 | err = bcmolt_cfg_get__tm_sched_stub(dev_id, &tm_sched_cfg); |
| 2344 | #else |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 2345 | err = bcmolt_cfg_get(dev_id, &tm_sched_cfg.hdr); |
Thiyagarajan Subramani | 6dc2005 | 2019-12-05 09:06:36 -0500 | [diff] [blame] | 2346 | #endif |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 2347 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2348 | OPENOLT_LOG(ERROR, openolt_log_id, "cfg: Failed to query TM scheduler, err = %s (%d)\n", tm_sched_cfg.hdr.hdr.err_text, err); |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 2349 | return err; |
| 2350 | } |
| 2351 | else if (tm_sched_cfg.data.state == BCMOLT_CONFIG_STATE_CONFIGURED) { |
| 2352 | OPENOLT_LOG(WARNING, openolt_log_id, "tm scheduler default config has already with id %d\n", tm_sched_key.id); |
| 2353 | return BCM_ERR_OK; |
| 2354 | } |
| 2355 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2356 | // bcmbal_tm_sched_owner |
| 2357 | BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key); |
| 2358 | |
| 2359 | /**< The output of the tm_sched object instance */ |
| 2360 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.type, BCMOLT_TM_SCHED_OUTPUT_TYPE_INTERFACE); |
| 2361 | |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2362 | if (direction == upstream) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2363 | // In upstream it is NNI scheduler |
| 2364 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.interface.interface_ref.intf_type, BCMOLT_INTERFACE_TYPE_NNI); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2365 | } else if (direction == downstream) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2366 | // In downstream it is PON scheduler |
| 2367 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.interface.interface_ref.intf_type, BCMOLT_INTERFACE_TYPE_PON); |
| 2368 | } |
| 2369 | |
| 2370 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.interface.interface_ref.intf_id, intf_id); |
| 2371 | |
| 2372 | // bcmbal_tm_sched_type |
| 2373 | // set the deafult policy to strict priority |
| 2374 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, sched_type, BCMOLT_TM_SCHED_TYPE_SP); |
| 2375 | |
| 2376 | // num_priorities: Max number of strict priority scheduling elements |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2377 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, num_priorities, NUM_OF_PRIORITIES); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2378 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2379 | err = bcmolt_cfg_set(dev_id, &tm_sched_cfg.hdr); |
| 2380 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2381 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create %s scheduler, id %d, intf_id %d, err = %s\n", |
| 2382 | direction.c_str(), tm_sched_key.id, intf_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2383 | return err; |
| 2384 | } |
| 2385 | |
| 2386 | OPENOLT_LOG(INFO, openolt_log_id, "Create %s scheduler success, id %d, intf_id %d\n", \ |
| 2387 | direction.c_str(), tm_sched_key.id, intf_id); |
| 2388 | return BCM_ERR_OK; |
| 2389 | } |
| 2390 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2391 | bcmos_errno CreateSched(std::string direction, uint32_t intf_id, uint32_t onu_id, uint32_t uni_id, uint32_t port_no, |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2392 | uint32_t alloc_id, ::tech_profile::AdditionalBW additional_bw, uint32_t weight, uint32_t priority, |
| 2393 | ::tech_profile::SchedulingPolicy sched_policy, ::tech_profile::TrafficShapingInfo tf_sh_info, |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2394 | uint32_t tech_profile_id) { |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 2395 | |
| 2396 | bcmos_errno err; |
| 2397 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2398 | if (direction == downstream) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2399 | bcmolt_tm_sched_cfg tm_sched_cfg; |
| 2400 | bcmolt_tm_sched_key tm_sched_key = {.id = 1}; |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2401 | tm_sched_key.id = get_tm_sched_id(intf_id, onu_id, uni_id, direction, tech_profile_id); |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 2402 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2403 | // bcmbal_tm_sched_owner |
| 2404 | // In downstream it is sub_term scheduler |
| 2405 | BCMOLT_CFG_INIT(&tm_sched_cfg, tm_sched, tm_sched_key); |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 2406 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2407 | /**< The output of the tm_sched object instance */ |
| 2408 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.type, BCMOLT_TM_SCHED_OUTPUT_TYPE_TM_SCHED); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2409 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2410 | // bcmbal_tm_sched_parent |
| 2411 | // The parent for the sub_term scheduler is the PON scheduler in the downstream |
| 2412 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.tm_sched.tm_sched_id, get_default_tm_sched_id(intf_id, direction)); |
Girish Gowdra | 5287fde | 2021-07-31 00:41:45 +0000 | [diff] [blame] | 2413 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.tm_sched.tm_sched_param.type, BCMOLT_TM_SCHED_PARAM_TYPE_PRIORITY); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2414 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, attachment_point.u.tm_sched.tm_sched_param.u.priority.priority, priority); |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2415 | /* removed by BAL v3.0, N/A - No direct attachment point of type ONU, same functionality may |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2416 | be achieved using the' virtual' type of attachment. |
| 2417 | tm_sched_owner.u.sub_term.intf_id = intf_id; |
| 2418 | tm_sched_owner.u.sub_term.sub_term_id = onu_id; |
| 2419 | */ |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2420 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2421 | // bcmbal_tm_sched_type |
| 2422 | // set the deafult policy to strict priority |
| 2423 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, sched_type, BCMOLT_TM_SCHED_TYPE_SP); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2424 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2425 | // num_priorities: Max number of strict priority scheduling elements |
| 2426 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, num_priorities, 8); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2427 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2428 | // bcmbal_tm_shaping |
| 2429 | if (tf_sh_info.cir() >= 0 && tf_sh_info.pir() > 0) { |
| 2430 | uint32_t cir = tf_sh_info.cir(); |
| 2431 | uint32_t pir = tf_sh_info.pir(); |
| 2432 | uint32_t burst = tf_sh_info.pbs(); |
| 2433 | OPENOLT_LOG(INFO, openolt_log_id, "applying traffic shaping in DL cir=%u, pir=%u, burst=%u\n", |
| 2434 | cir, pir, burst); |
| 2435 | BCMOLT_FIELD_SET_PRESENT(&tm_sched_cfg.data.rate, tm_shaping, pir); |
| 2436 | BCMOLT_FIELD_SET_PRESENT(&tm_sched_cfg.data.rate, tm_shaping, burst); |
| 2437 | // FIXME: Setting CIR, results in BAL throwing error 'tm_sched minimum rate is not supported yet' |
| 2438 | //BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.cir, cir); |
| 2439 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.pir, pir); |
| 2440 | BCMOLT_MSG_FIELD_SET(&tm_sched_cfg, rate.burst, burst); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2441 | } |
| 2442 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2443 | err = bcmolt_cfg_set(dev_id, &tm_sched_cfg.hdr); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2444 | if (err) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2445 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create downstream subscriber scheduler, id %d, \ |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2446 | intf_id %d, onu_id %d, uni_id %d, port_no %u, err = %s (%d)\n", tm_sched_key.id, intf_id, onu_id, uni_id, \ |
| 2447 | port_no, tm_sched_cfg.hdr.hdr.err_text, err); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2448 | return err; |
| 2449 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2450 | OPENOLT_LOG(INFO, openolt_log_id, "Create downstream subscriber sched, id %d, intf_id %d, onu_id %d, \ |
| 2451 | uni_id %d, port_no %u\n", tm_sched_key.id, intf_id, onu_id, uni_id, port_no); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2452 | |
| 2453 | } else { //upstream |
Arthur Syu | 094df16 | 2022-04-21 17:50:06 +0800 | [diff] [blame] | 2454 | std::string intf_technology = intf_technologies[intf_id]; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2455 | bcmolt_itupon_alloc_cfg cfg; |
| 2456 | bcmolt_itupon_alloc_key key = { }; |
| 2457 | key.pon_ni = intf_id; |
| 2458 | key.alloc_id = alloc_id; |
Arthur Syu | 094df16 | 2022-04-21 17:50:06 +0800 | [diff] [blame] | 2459 | int bw_granularity = (intf_technology == "XGS-PON")?XGS_BANDWIDTH_GRANULARITY:GPON_BANDWIDTH_GRANULARITY; |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2460 | /* |
| 2461 | PIR: Maximum Bandwidth |
| 2462 | CIR: Assured Bandwidth |
| 2463 | GIR: Fixed Bandwidth |
| 2464 | */ |
Burak Gurdag | 03919c7 | 2020-02-04 22:46:57 +0000 | [diff] [blame] | 2465 | int pir_bw = tf_sh_info.pir()*125; // conversion from kbps to bytes/sec |
| 2466 | int cir_bw = tf_sh_info.cir()*125; // conversion from kbps to bytes/sec |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2467 | int gir_bw = tf_sh_info.gir()*125; // conversion from kbps to bytes/sec |
| 2468 | int guaranteed_bw = cir_bw+gir_bw; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2469 | //offset to match bandwidth granularity |
| 2470 | int offset_pir_bw = pir_bw%bw_granularity; |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2471 | int offset_gir_bw = gir_bw%bw_granularity; |
| 2472 | int offset_guaranteed_bw = guaranteed_bw%bw_granularity; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2473 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2474 | pir_bw = pir_bw - offset_pir_bw; |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2475 | gir_bw = gir_bw - offset_gir_bw; |
| 2476 | guaranteed_bw = guaranteed_bw - offset_guaranteed_bw; |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2477 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2478 | BCMOLT_CFG_INIT(&cfg, itupon_alloc, key); |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2479 | |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2480 | OPENOLT_LOG(INFO, openolt_log_id, "Creating alloc_id %d with pir = %d bytes/sec, cir = %d bytes/sec, gir = %d bytes/sec, additional_bw = %d.\n", alloc_id, pir_bw, cir_bw, gir_bw, additional_bw); |
| 2481 | |
| 2482 | if (pir_bw == 0) { |
| 2483 | OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth must be at least %d bytes/sec\n", |
| 2484 | (board_technology == "XGS-PON")?XGS_BANDWIDTH_GRANULARITY:GPON_BANDWIDTH_GRANULARITY); |
| 2485 | return BCM_ERR_PARM; |
| 2486 | } else if (pir_bw < guaranteed_bw) { |
| 2487 | OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth (%d) can't be less than Guaranteed bandwidth (%d)\n", |
| 2488 | pir_bw, guaranteed_bw); |
| 2489 | return BCM_ERR_PARM; |
| 2490 | } |
| 2491 | |
| 2492 | // Setting additional bw eligibility and validating bw provisionings |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2493 | switch (additional_bw) { |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2494 | |
| 2495 | case tech_profile::AdditionalBW::AdditionalBW_BestEffort: //AdditionalBW_BestEffort - For T-Cont types 4 & 5 |
| 2496 | if (pir_bw == guaranteed_bw) { |
| 2497 | OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth must be greater than Guaranteed \ |
| 2498 | bandwidth for additional bandwidth eligibility of type Best Effort\n"); |
| 2499 | return BCM_ERR_PARM; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2500 | } |
| 2501 | BCMOLT_MSG_FIELD_SET(&cfg, sla.additional_bw_eligibility, BCMOLT_ADDITIONAL_BW_ELIGIBILITY_BEST_EFFORT); |
| 2502 | break; |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2503 | |
| 2504 | case tech_profile::AdditionalBW::AdditionalBW_NA: //AdditionalBW_NA - For T-Cont types 3 & 5 |
| 2505 | if (guaranteed_bw == 0) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2506 | OPENOLT_LOG(ERROR, openolt_log_id, "Guaranteed bandwidth must be greater than zero for \ |
| 2507 | additional bandwidth eligibility of type Non-Assured (NA)\n"); |
| 2508 | return BCM_ERR_PARM; |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2509 | } else if (pir_bw == guaranteed_bw) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2510 | OPENOLT_LOG(ERROR, openolt_log_id, "Maximum bandwidth must be greater than Guaranteed \ |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2511 | bandwidth for additional bandwidth eligibility of type Non-Assured\n"); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2512 | return BCM_ERR_PARM; |
| 2513 | } |
| 2514 | BCMOLT_MSG_FIELD_SET(&cfg, sla.additional_bw_eligibility, BCMOLT_ADDITIONAL_BW_ELIGIBILITY_NON_ASSURED); |
| 2515 | break; |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2516 | |
| 2517 | case tech_profile::AdditionalBW::AdditionalBW_None: //AdditionalBW_None - For T-Cont types 1 & 2 |
| 2518 | if (guaranteed_bw != pir_bw) { |
| 2519 | OPENOLT_LOG(ERROR, openolt_log_id, "Guaranteed bandwidth must be equal to maximum bandwidth \ |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2520 | for additional bandwidth eligibility of type None\n"); |
| 2521 | return BCM_ERR_PARM; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2522 | } |
| 2523 | BCMOLT_MSG_FIELD_SET(&cfg, sla.additional_bw_eligibility, BCMOLT_ADDITIONAL_BW_ELIGIBILITY_NONE); |
| 2524 | break; |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2525 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2526 | default: |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2527 | OPENOLT_LOG(ERROR, openolt_log_id, "Invalid additional bandwidth eligibility value (%d) supplied.\n", additional_bw); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2528 | return BCM_ERR_PARM; |
Girish Gowdru | e075c64 | 2019-01-23 04:05:53 -0800 | [diff] [blame] | 2529 | } |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2530 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2531 | /* CBR Real Time Bandwidth which require shaping of the bandwidth allocations |
| 2532 | in a fine granularity. */ |
| 2533 | BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_rt_bw, 0); |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2534 | /* Since we can assign minimum 64000 bytes/sec for cbr_rt_bw, we prefer assigning |
| 2535 | gir_bw to cbr_nrt_bw to allow smaller amounts. |
| 2536 | TODO: Specify CBR_RT_BW and CBR_NRT_BW separately from VOLTHA */ |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2537 | /* Fixed Bandwidth with no critical requirement of shaping */ |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2538 | BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_nrt_bw, gir_bw); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2539 | /* Dynamic bandwidth which the OLT is committed to allocate upon demand */ |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2540 | BCMOLT_MSG_FIELD_SET(&cfg, sla.guaranteed_bw, guaranteed_bw); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2541 | /* Maximum allocated bandwidth allowed for this alloc ID */ |
| 2542 | BCMOLT_MSG_FIELD_SET(&cfg, sla.maximum_bw, pir_bw); |
Burak Gurdag | 623fada | 2021-04-20 22:02:36 +0000 | [diff] [blame] | 2543 | |
| 2544 | if (pir_bw == gir_bw) { // T-Cont Type 1 --> set alloc type to NONE |
| 2545 | // the condition cir_bw == 0 is implicitly satistied |
| 2546 | OPENOLT_LOG(INFO, openolt_log_id, "Setting alloc type to NONE since maximum bandwidth is equal to fixed bandwidth\n"); |
| 2547 | BCMOLT_MSG_FIELD_SET(&cfg, sla.alloc_type, BCMOLT_ALLOC_TYPE_NONE); |
| 2548 | } else { // For other T-Cont types, set alloc type to NSR. TODO: read the default from a config file. |
| 2549 | BCMOLT_MSG_FIELD_SET(&cfg, sla.alloc_type, BCMOLT_ALLOC_TYPE_NSR); |
| 2550 | } |
| 2551 | |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2552 | /* Set to True for AllocID with CBR RT Bandwidth that requires compensation |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2553 | for skipped allocations during quiet window */ |
| 2554 | BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_rt_compensation, BCMOS_FALSE); |
| 2555 | /**< Allocation Profile index for CBR non-RT Bandwidth */ |
| 2556 | BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_nrt_ap_index, 0); |
| 2557 | /**< Allocation Profile index for CBR RT Bandwidth */ |
| 2558 | BCMOLT_MSG_FIELD_SET(&cfg, sla.cbr_rt_ap_index, 0); |
| 2559 | /**< Alloc ID Weight used in case of Extended DBA mode */ |
| 2560 | BCMOLT_MSG_FIELD_SET(&cfg, sla.weight, 0); |
| 2561 | /**< Alloc ID Priority used in case of Extended DBA mode */ |
| 2562 | BCMOLT_MSG_FIELD_SET(&cfg, sla.priority, 0); |
| 2563 | BCMOLT_MSG_FIELD_SET(&cfg, onu_id, onu_id); |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2564 | |
Girish Gowdra | cdd5e5f | 2021-12-05 16:48:08 +0530 | [diff] [blame] | 2565 | bcmolt_onu_state onu_state; |
| 2566 | bool wait_for_alloc_cfg_cmplt = false; |
| 2567 | err = get_onu_state((bcmolt_interface)intf_id, (bcmolt_onu_id)onu_id, &onu_state); |
| 2568 | if (err) { |
| 2569 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to fetch onu status, intf_id = %d, onu_id = %d, err = %s\n", |
| 2570 | intf_id, onu_id, bcmos_strerror(err)); |
| 2571 | return err; |
| 2572 | } else if (onu_state == BCMOLT_ONU_STATE_ACTIVE) { |
| 2573 | wait_for_alloc_cfg_cmplt = true; |
| 2574 | } |
| 2575 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2576 | err = bcmolt_cfg_set(dev_id, &cfg.hdr); |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2577 | if (err) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2578 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create upstream bandwidth allocation, intf_id %d, onu_id %d, uni_id %d,\ |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2579 | port_no %u, alloc_id %d, err = %s (%d)\n", intf_id, onu_id,uni_id,port_no,alloc_id, cfg.hdr.hdr.err_text, err); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2580 | return err; |
Girish Gowdra | cdd5e5f | 2021-12-05 16:48:08 +0530 | [diff] [blame] | 2581 | } else if (wait_for_alloc_cfg_cmplt) { |
| 2582 | err = wait_for_alloc_action(intf_id, alloc_id, ALLOC_OBJECT_CREATE); |
| 2583 | if (err) { |
| 2584 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create upstream bandwidth allocation, intf_id %d, onu_id %d, uni_id %d,\ |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 2585 | port_no %u, alloc_id %d, err = %s\n", intf_id, onu_id,uni_id,port_no,alloc_id, bcmos_strerror(err)); |
Girish Gowdra | cdd5e5f | 2021-12-05 16:48:08 +0530 | [diff] [blame] | 2586 | return err; |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2587 | } |
| 2588 | } else { |
Girish Gowdra | cdd5e5f | 2021-12-05 16:48:08 +0530 | [diff] [blame] | 2589 | OPENOLT_LOG(INFO, openolt_log_id, "onu not active, not waiting for alloc cfg complete, onu_state = %d, intf = %d, onu=%d\n", |
| 2590 | onu_state, intf_id, onu_id); |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 2591 | } |
Girish Gowdra | cdd5e5f | 2021-12-05 16:48:08 +0530 | [diff] [blame] | 2592 | |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 2593 | OPENOLT_LOG(INFO, openolt_log_id, "create upstream bandwidth allocation success, intf_id %d, onu_id %d, uni_id %d,\ |
| 2594 | port_no %u, alloc_id %d\n", intf_id, onu_id,uni_id,port_no,alloc_id); |
| 2595 | |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 2596 | } |
| 2597 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2598 | return BCM_ERR_OK; |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2599 | } |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 2600 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2601 | Status CreateTrafficSchedulers_(const ::tech_profile::TrafficSchedulers *traffic_scheds) { |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2602 | uint32_t intf_id = traffic_scheds->intf_id(); |
| 2603 | uint32_t onu_id = traffic_scheds->onu_id(); |
| 2604 | uint32_t uni_id = traffic_scheds->uni_id(); |
| 2605 | uint32_t port_no = traffic_scheds->port_no(); |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2606 | std::string direction; |
| 2607 | unsigned int alloc_id; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2608 | ::tech_profile::SchedulerConfig sched_config; |
| 2609 | ::tech_profile::AdditionalBW additional_bw; |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2610 | uint32_t priority; |
| 2611 | uint32_t weight; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2612 | ::tech_profile::SchedulingPolicy sched_policy; |
| 2613 | ::tech_profile::TrafficShapingInfo traffic_shaping_info; |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2614 | uint32_t tech_profile_id; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2615 | bcmos_errno err; |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2616 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2617 | for (int i = 0; i < traffic_scheds->traffic_scheds_size(); i++) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2618 | ::tech_profile::TrafficScheduler traffic_sched = traffic_scheds->traffic_scheds(i); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2619 | |
| 2620 | direction = GetDirection(traffic_sched.direction()); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2621 | if (direction == "direction-not-supported") { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2622 | return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2623 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2624 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2625 | alloc_id = traffic_sched.alloc_id(); |
| 2626 | sched_config = traffic_sched.scheduler(); |
| 2627 | additional_bw = sched_config.additional_bw(); |
| 2628 | priority = sched_config.priority(); |
| 2629 | weight = sched_config.weight(); |
| 2630 | sched_policy = sched_config.sched_policy(); |
| 2631 | traffic_shaping_info = traffic_sched.traffic_shaping_info(); |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2632 | tech_profile_id = traffic_sched.tech_profile_id(); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2633 | err = CreateSched(direction, intf_id, onu_id, uni_id, port_no, alloc_id, additional_bw, weight, priority, |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2634 | sched_policy, traffic_shaping_info, tech_profile_id); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2635 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2636 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create scheduler, err = %s\n", bcmos_strerror(err)); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2637 | return bcm_to_grpc_err(err, "Failed to create scheduler"); |
| 2638 | } |
Girish Gowdru | 1cdf6ce | 2018-08-27 02:43:02 -0700 | [diff] [blame] | 2639 | } |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 2640 | return Status::OK; |
Shad Ansari | b7b0ced | 2018-05-11 21:53:32 +0000 | [diff] [blame] | 2641 | } |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 2642 | |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2643 | bcmos_errno RemoveSched(int intf_id, int onu_id, int uni_id, int alloc_id, std::string direction, int tech_profile_id) { |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 2644 | |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 2645 | bcmos_errno err; |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2646 | bcmolt_onu_state onu_state; |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 2647 | uint16_t sched_id; |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 2648 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2649 | if (direction == upstream) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2650 | bcmolt_itupon_alloc_cfg cfg; |
| 2651 | bcmolt_itupon_alloc_key key = { }; |
| 2652 | key.pon_ni = intf_id; |
| 2653 | key.alloc_id = alloc_id; |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 2654 | sched_id = alloc_id; |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 2655 | |
Girish Gowdra | cdd5e5f | 2021-12-05 16:48:08 +0530 | [diff] [blame] | 2656 | bcmolt_onu_state onu_state; |
| 2657 | bool wait_for_alloc_cfg_cmplt = false; |
| 2658 | err = get_onu_state((bcmolt_interface)intf_id, (bcmolt_onu_id)onu_id, &onu_state); |
| 2659 | if (err) { |
| 2660 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to fetch onu status, intf_id = %d, onu_id = %d, err = %s\n", |
| 2661 | intf_id, onu_id, bcmos_strerror(err)); |
| 2662 | return err; |
| 2663 | } else if (onu_state == BCMOLT_ONU_STATE_ACTIVE) { |
| 2664 | wait_for_alloc_cfg_cmplt = true; |
| 2665 | } |
| 2666 | |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2667 | BCMOLT_CFG_INIT(&cfg, itupon_alloc, key); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2668 | err = bcmolt_cfg_clear(dev_id, &cfg.hdr); |
| 2669 | if (err) { |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2670 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove scheduler, direction = %s, intf_id %d, alloc_id %d, err = %s (%d)\n", |
| 2671 | direction.c_str(), intf_id, alloc_id, cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2672 | return err; |
Girish Gowdra | cdd5e5f | 2021-12-05 16:48:08 +0530 | [diff] [blame] | 2673 | } else if (wait_for_alloc_cfg_cmplt) { |
| 2674 | err = wait_for_alloc_action(intf_id, alloc_id, ALLOC_OBJECT_DELETE); |
| 2675 | if (err) { |
| 2676 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove upstream bandwidth allocation, intf_id %d, onu_id %d, uni_id %d,\ |
| 2677 | pon_intf %u, alloc_id %d, err = %s\n", intf_id, onu_id,uni_id,intf_id,alloc_id, bcmos_strerror(err)); |
| 2678 | return err; |
| 2679 | } |
Thiyagarajan Subramani | ad46323 | 2020-02-28 19:10:43 +0530 | [diff] [blame] | 2680 | } else { |
Girish Gowdra | cdd5e5f | 2021-12-05 16:48:08 +0530 | [diff] [blame] | 2681 | OPENOLT_LOG(INFO, openolt_log_id, "onu not active, not waiting for alloc cfg complete, onu_state = %d, intf = %d, onu=%d\n", |
| 2682 | onu_state, intf_id, onu_id); |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 2683 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2684 | } else if (direction == downstream) { |
| 2685 | bcmolt_tm_sched_cfg cfg; |
| 2686 | bcmolt_tm_sched_key key = { }; |
Nicolas Palpacuer | 9c35208 | 2018-08-14 16:37:14 -0400 | [diff] [blame] | 2687 | |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2688 | if (is_tm_sched_id_present(intf_id, onu_id, uni_id, direction, tech_profile_id)) { |
| 2689 | key.id = get_tm_sched_id(intf_id, onu_id, uni_id, direction, tech_profile_id); |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 2690 | sched_id = key.id; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2691 | } else { |
| 2692 | OPENOLT_LOG(INFO, openolt_log_id, "schduler not present in %s, err %d\n", direction.c_str(), err); |
| 2693 | return BCM_ERR_OK; |
| 2694 | } |
Girish Gowdra | 9646105 | 2019-11-22 20:13:59 +0530 | [diff] [blame] | 2695 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2696 | BCMOLT_CFG_INIT(&cfg, tm_sched, key); |
| 2697 | err = bcmolt_cfg_clear(dev_id, &(cfg.hdr)); |
| 2698 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2699 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove scheduler, direction = %s, sched_id %d, \ |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2700 | intf_id %d, onu_id %d, tech_profile_id %d, err = %s (%d)\n", direction.c_str(), key.id, intf_id, onu_id, tech_profile_id, cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2701 | return err; |
| 2702 | } |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2703 | } |
| 2704 | |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2705 | OPENOLT_LOG(INFO, openolt_log_id, "Removed sched, direction = %s, id %d, intf_id %d, onu_id %d, tech_profile_id %d\n", |
| 2706 | direction.c_str(), sched_id, intf_id, onu_id, tech_profile_id); |
| 2707 | free_tm_sched_id(intf_id, onu_id, uni_id, direction, tech_profile_id); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2708 | return BCM_ERR_OK; |
| 2709 | } |
| 2710 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2711 | Status RemoveTrafficSchedulers_(const ::tech_profile::TrafficSchedulers *traffic_scheds) { |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2712 | uint32_t intf_id = traffic_scheds->intf_id(); |
| 2713 | uint32_t onu_id = traffic_scheds->onu_id(); |
| 2714 | uint32_t uni_id = traffic_scheds->uni_id(); |
| 2715 | std::string direction; |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2716 | uint32_t tech_profile_id; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2717 | bcmos_errno err; |
| 2718 | |
| 2719 | for (int i = 0; i < traffic_scheds->traffic_scheds_size(); i++) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2720 | ::tech_profile::TrafficScheduler traffic_sched = traffic_scheds->traffic_scheds(i); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2721 | |
| 2722 | direction = GetDirection(traffic_sched.direction()); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2723 | if (direction == "direction-not-supported") { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2724 | return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2725 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2726 | |
| 2727 | int alloc_id = traffic_sched.alloc_id(); |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2728 | int tech_profile_id = traffic_sched.tech_profile_id(); |
| 2729 | err = RemoveSched(intf_id, onu_id, uni_id, alloc_id, direction, tech_profile_id); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2730 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2731 | OPENOLT_LOG(ERROR, openolt_log_id, "Error-removing-traffic-scheduler, err = %s\n",bcmos_strerror(err)); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2732 | return bcm_to_grpc_err(err, "error-removing-traffic-scheduler"); |
| 2733 | } |
| 2734 | } |
| 2735 | return Status::OK; |
| 2736 | } |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2737 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2738 | bcmos_errno CreateTrafficQueueMappingProfile(uint32_t sched_id, uint32_t intf_id, uint32_t onu_id, uint32_t uni_id, \ |
| 2739 | std::string direction, std::vector<uint32_t> tmq_map_profile) { |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2740 | bcmos_errno err; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2741 | bcmolt_tm_qmp_cfg tm_qmp_cfg; |
| 2742 | bcmolt_tm_qmp_key tm_qmp_key; |
| 2743 | bcmolt_arr_u8_8 pbits_to_tmq_id = {0}; |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2744 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2745 | int tm_qmp_id = get_tm_qmp_id(sched_id, intf_id, onu_id, uni_id, tmq_map_profile); |
| 2746 | if (tm_qmp_id == -1) { |
Thiyagarajan Subramani | 6dc2005 | 2019-12-05 09:06:36 -0500 | [diff] [blame] | 2747 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create tm queue mapping profile. Max allowed tm queue mapping profile count is 16.\n"); |
| 2748 | return BCM_ERR_RANGE; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2749 | } |
Girish Gowdru | f26cf88 | 2019-05-01 23:47:58 -0700 | [diff] [blame] | 2750 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2751 | tm_qmp_key.id = tm_qmp_id; |
| 2752 | for (uint32_t priority=0; priority<tmq_map_profile.size(); priority++) { |
| 2753 | pbits_to_tmq_id.arr[priority] = tmq_map_profile[priority]; |
| 2754 | } |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2755 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2756 | BCMOLT_CFG_INIT(&tm_qmp_cfg, tm_qmp, tm_qmp_key); |
| 2757 | BCMOLT_MSG_FIELD_SET(&tm_qmp_cfg, type, BCMOLT_TM_QMP_TYPE_PBITS); |
| 2758 | BCMOLT_MSG_FIELD_SET(&tm_qmp_cfg, pbits_to_tmq_id, pbits_to_tmq_id); |
Jason Huang | 09b73ea | 2020-01-08 17:52:05 +0800 | [diff] [blame] | 2759 | //BCMOLT_MSG_FIELD_SET(&tm_qmp_cfg, ref_count, 0); |
| 2760 | //BCMOLT_MSG_FIELD_SET(&tm_qmp_cfg, state, BCMOLT_CONFIG_STATE_CONFIGURED); |
Girish Gowdru | 7c4ec2d | 2018-10-25 00:29:54 -0700 | [diff] [blame] | 2761 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2762 | err = bcmolt_cfg_set(dev_id, &tm_qmp_cfg.hdr); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2763 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2764 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create tm queue mapping profile, tm_qmp_id %d, err = %s\n", |
| 2765 | tm_qmp_key.id, bcmos_strerror(err)); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2766 | return err; |
| 2767 | } |
Craig Lutgen | 967a1d0 | 2018-11-27 10:41:51 -0600 | [diff] [blame] | 2768 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2769 | OPENOLT_LOG(INFO, openolt_log_id, "Create tm queue mapping profile success, id %d\n", \ |
| 2770 | tm_qmp_key.id); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2771 | return BCM_ERR_OK; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2772 | } |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2773 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2774 | bcmos_errno RemoveTrafficQueueMappingProfile(uint32_t tm_qmp_id) { |
| 2775 | bcmos_errno err; |
| 2776 | bcmolt_tm_qmp_cfg tm_qmp_cfg; |
| 2777 | bcmolt_tm_qmp_key tm_qmp_key; |
| 2778 | tm_qmp_key.id = tm_qmp_id; |
| 2779 | |
| 2780 | BCMOLT_CFG_INIT(&tm_qmp_cfg, tm_qmp, tm_qmp_key); |
| 2781 | err = bcmolt_cfg_clear(dev_id, &tm_qmp_cfg.hdr); |
| 2782 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2783 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove tm queue mapping profile, tm_qmp_id %d, err = %s\n", |
| 2784 | tm_qmp_key.id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2785 | return err; |
| 2786 | } |
| 2787 | |
| 2788 | OPENOLT_LOG(INFO, openolt_log_id, "Remove tm queue mapping profile success, id %d\n", \ |
| 2789 | tm_qmp_key.id); |
| 2790 | return BCM_ERR_OK; |
| 2791 | } |
| 2792 | |
| 2793 | bcmos_errno CreateDefaultQueue(uint32_t intf_id, const std::string direction) { |
| 2794 | bcmos_errno err; |
| 2795 | |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 2796 | /* Create default queues on the given PON/NNI scheduler */ |
| 2797 | for (int queue_id = 0; queue_id < NUMBER_OF_DEFAULT_INTERFACE_QUEUES; queue_id++) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2798 | bcmolt_tm_queue_cfg tm_queue_cfg; |
| 2799 | bcmolt_tm_queue_key tm_queue_key = {}; |
| 2800 | tm_queue_key.sched_id = get_default_tm_sched_id(intf_id, direction); |
| 2801 | tm_queue_key.id = queue_id; |
Thiyagarajan Subramani | 8154d93 | 2019-11-13 05:29:06 -0500 | [diff] [blame] | 2802 | /* DefaultQueues on PON/NNI schedulers are created with egress_qos_type as |
| 2803 | BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE - with tm_q_set_id 32768 */ |
| 2804 | tm_queue_key.tm_q_set_id = BCMOLT_TM_QUEUE_SET_ID_QSET_NOT_USE; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2805 | |
| 2806 | BCMOLT_CFG_INIT(&tm_queue_cfg, tm_queue, tm_queue_key); |
| 2807 | BCMOLT_MSG_FIELD_SET(&tm_queue_cfg, tm_sched_param.type, BCMOLT_TM_SCHED_PARAM_TYPE_PRIORITY); |
| 2808 | BCMOLT_MSG_FIELD_SET(&tm_queue_cfg, tm_sched_param.u.priority.priority, queue_id); |
| 2809 | |
| 2810 | err = bcmolt_cfg_set(dev_id, &tm_queue_cfg.hdr); |
| 2811 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2812 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create %s tm queue, id %d, sched_id %d, tm_q_set_id %d, err = %s\n", \ |
| 2813 | direction.c_str(), tm_queue_key.id, tm_queue_key.sched_id, tm_queue_key.tm_q_set_id, bcmos_strerror(err)); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2814 | return err; |
| 2815 | } |
| 2816 | |
| 2817 | OPENOLT_LOG(INFO, openolt_log_id, "Create %s tm_queue success, id %d, sched_id %d, tm_q_set_id %d\n", \ |
| 2818 | direction.c_str(), tm_queue_key.id, tm_queue_key.sched_id, tm_queue_key.tm_q_set_id); |
| 2819 | } |
| 2820 | return BCM_ERR_OK; |
| 2821 | } |
| 2822 | |
Thiyagarajan Subramani | 8154d93 | 2019-11-13 05:29:06 -0500 | [diff] [blame] | 2823 | bcmos_errno CreateQueue(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2824 | bcmolt_egress_qos_type qos_type, uint32_t priority, uint32_t gemport_id, uint32_t tech_profile_id) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2825 | bcmos_errno err; |
| 2826 | bcmolt_tm_queue_cfg cfg; |
| 2827 | bcmolt_tm_queue_key key = { }; |
| 2828 | OPENOLT_LOG(INFO, openolt_log_id, "creating %s queue. access_intf_id = %d, onu_id = %d, uni_id = %d \ |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2829 | gemport_id = %d, tech_profile_id = %d\n", direction.c_str(), access_intf_id, onu_id, uni_id, gemport_id, tech_profile_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2830 | |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2831 | key.sched_id = (direction == upstream) ? get_default_tm_sched_id(nni_intf_id, direction) : \ |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2832 | get_tm_sched_id(access_intf_id, onu_id, uni_id, direction, tech_profile_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2833 | |
| 2834 | if (priority > 7) { |
| 2835 | return BCM_ERR_RANGE; |
| 2836 | } |
| 2837 | |
| 2838 | /* FIXME: The upstream queues have to be created once only. |
| 2839 | The upstream queues on the NNI scheduler are shared by all subscribers. |
| 2840 | When the first scheduler comes in, the queues get created, and are re-used by all others. |
| 2841 | Also, these queues should be present until the last subscriber exits the system. |
| 2842 | One solution is to have these queues always, i.e., create it as soon as OLT is enabled. |
| 2843 | |
| 2844 | There is one queue per gem port and Queue ID is fetched based on priority_q configuration |
| 2845 | for each GEM in TECH PROFILE */ |
| 2846 | key.id = queue_id_list[priority]; |
| 2847 | |
| 2848 | if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) { |
| 2849 | // Reset the Queue ID to 0, if it is fixed queue, i.e., there is only one queue for subscriber. |
| 2850 | key.id = 0; |
| 2851 | key.tm_q_set_id = BCMOLT_TM_QUEUE_SET_ID_QSET_NOT_USE; |
| 2852 | } |
| 2853 | else if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| 2854 | key.tm_q_set_id = get_tm_qmp_id(key.sched_id, access_intf_id, onu_id, uni_id); |
| 2855 | } |
| 2856 | else { |
| 2857 | key.tm_q_set_id = BCMOLT_TM_QUEUE_KEY_TM_Q_SET_ID_DEFAULT; |
| 2858 | } |
| 2859 | |
| 2860 | OPENOLT_LOG(INFO, openolt_log_id, "queue assigned queue_id = %d\n", key.id); |
| 2861 | |
| 2862 | BCMOLT_CFG_INIT(&cfg, tm_queue, key); |
| 2863 | BCMOLT_MSG_FIELD_SET(&cfg, tm_sched_param.u.priority.priority, priority); |
Girish Gowdra | 5287fde | 2021-07-31 00:41:45 +0000 | [diff] [blame] | 2864 | BCMOLT_MSG_FIELD_SET(&cfg, tm_sched_param.type, BCMOLT_TM_SCHED_PARAM_TYPE_PRIORITY); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2865 | |
| 2866 | err = bcmolt_cfg_set(dev_id, &cfg.hdr); |
| 2867 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2868 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create subscriber tm queue, direction = %s, queue_id %d, \ |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2869 | sched_id %d, tm_q_set_id %d, intf_id %d, onu_id %d, uni_id %d, tech_profile_id %d, err = %s (%d)\n", \ |
| 2870 | direction.c_str(), key.id, key.sched_id, key.tm_q_set_id, access_intf_id, onu_id, uni_id, tech_profile_id, cfg.hdr.hdr.err_text, err); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2871 | return err; |
| 2872 | } |
| 2873 | |
Thiyagarajan Subramani | e976fcf | 2021-05-07 22:46:57 +0530 | [diff] [blame] | 2874 | if (direction == upstream || direction == downstream) { |
Thiyagarajan Subramani | 19168f5 | 2021-05-25 23:26:41 +0530 | [diff] [blame] | 2875 | Status st = install_gem_port(access_intf_id, onu_id, uni_id, gemport_id, board_technology); |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2876 | if (st.error_code() != grpc::StatusCode::ALREADY_EXISTS && st.error_code() != grpc::StatusCode::OK) { |
| 2877 | OPENOLT_LOG(ERROR, openolt_log_id, "failed to created gemport=%d, access_intf=%d, onu_id=%d\n", gemport_id, access_intf_id, onu_id); |
| 2878 | return BCM_ERR_INTERNAL; |
| 2879 | } |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 2880 | if (direction == upstream) { |
| 2881 | // Create the pon-gem to onu-uni mapping |
| 2882 | pon_gem pg(access_intf_id, gemport_id); |
| 2883 | onu_uni ou(onu_id, uni_id); |
| 2884 | bcmos_fastlock_lock(&pon_gem_to_onu_uni_map_lock); |
| 2885 | pon_gem_to_onu_uni_map[pg] = ou; |
| 2886 | bcmos_fastlock_unlock(&pon_gem_to_onu_uni_map_lock, 0); |
| 2887 | } |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2888 | } |
| 2889 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2890 | OPENOLT_LOG(INFO, openolt_log_id, "Created tm_queue, direction %s, id %d, sched_id %d, tm_q_set_id %d, \ |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2891 | intf_id %d, onu_id %d, uni_id %d, tech_profiled_id %d\n", direction.c_str(), key.id, key.sched_id, key.tm_q_set_id, access_intf_id, onu_id, uni_id, tech_profile_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2892 | return BCM_ERR_OK; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2893 | } |
| 2894 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2895 | Status CreateTrafficQueues_(const ::tech_profile::TrafficQueues *traffic_queues) { |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2896 | uint32_t intf_id = traffic_queues->intf_id(); |
| 2897 | uint32_t onu_id = traffic_queues->onu_id(); |
| 2898 | uint32_t uni_id = traffic_queues->uni_id(); |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2899 | uint32_t tech_profile_id = traffic_queues->tech_profile_id(); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2900 | uint32_t sched_id; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2901 | std::string direction; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2902 | bcmos_errno err; |
Thiyagarajan Subramani | 8154d93 | 2019-11-13 05:29:06 -0500 | [diff] [blame] | 2903 | bcmolt_egress_qos_type qos_type = get_qos_type(intf_id, onu_id, uni_id, traffic_queues->traffic_queues_size()); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2904 | |
| 2905 | if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| 2906 | uint32_t queues_priority_q[traffic_queues->traffic_queues_size()] = {0}; |
| 2907 | std::string queues_pbit_map[traffic_queues->traffic_queues_size()]; |
| 2908 | for (int i = 0; i < traffic_queues->traffic_queues_size(); i++) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2909 | ::tech_profile::TrafficQueue traffic_queue = traffic_queues->traffic_queues(i); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2910 | |
| 2911 | direction = GetDirection(traffic_queue.direction()); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2912 | if (direction == "direction-not-supported") { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2913 | return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2914 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2915 | |
| 2916 | queues_priority_q[i] = traffic_queue.priority(); |
| 2917 | queues_pbit_map[i] = traffic_queue.pbit_map(); |
| 2918 | } |
| 2919 | |
| 2920 | std::vector<uint32_t> tmq_map_profile(8, 0); |
| 2921 | tmq_map_profile = get_tmq_map_profile(get_valid_queues_pbit_map(queues_pbit_map, COUNT_OF(queues_pbit_map)), \ |
| 2922 | queues_priority_q, COUNT_OF(queues_priority_q)); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2923 | sched_id = (direction == upstream) ? get_default_tm_sched_id(nni_intf_id, direction) : \ |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2924 | get_tm_sched_id(intf_id, onu_id, uni_id, direction, tech_profile_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2925 | |
| 2926 | int tm_qmp_id = get_tm_qmp_id(tmq_map_profile); |
| 2927 | if (tm_qmp_id == -1) { |
Thiyagarajan Subramani | 6dc2005 | 2019-12-05 09:06:36 -0500 | [diff] [blame] | 2928 | err = CreateTrafficQueueMappingProfile(sched_id, intf_id, onu_id, uni_id, direction, tmq_map_profile); |
| 2929 | if (err != BCM_ERR_OK) { |
| 2930 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create tm queue mapping profile, err = %s\n", bcmos_strerror(err)); |
| 2931 | return bcm_to_grpc_err(err, "Failed to create tm queue mapping profile"); |
| 2932 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2933 | } else if (tm_qmp_id != -1 && get_tm_qmp_id(sched_id, intf_id, onu_id, uni_id) == -1) { |
| 2934 | OPENOLT_LOG(INFO, openolt_log_id, "tm queue mapping profile present already with id %d\n", tm_qmp_id); |
| 2935 | update_sched_qmp_id_map(sched_id, intf_id, onu_id, uni_id, tm_qmp_id); |
| 2936 | } |
| 2937 | } |
| 2938 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2939 | for (int i = 0; i < traffic_queues->traffic_queues_size(); i++) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 2940 | ::tech_profile::TrafficQueue traffic_queue = traffic_queues->traffic_queues(i); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2941 | |
| 2942 | direction = GetDirection(traffic_queue.direction()); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2943 | if (direction == "direction-not-supported") { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2944 | return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 2945 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2946 | |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2947 | err = CreateQueue(direction, intf_id, onu_id, uni_id, qos_type, traffic_queue.priority(), traffic_queue.gemport_id(), tech_profile_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2948 | |
Girish Gowdru | f26cf88 | 2019-05-01 23:47:58 -0700 | [diff] [blame] | 2949 | // If the queue exists already, lets not return failure and break the loop. |
| 2950 | if (err && err != BCM_ERR_ALREADY) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 2951 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to create queue, err = %s\n",bcmos_strerror(err)); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2952 | return bcm_to_grpc_err(err, "Failed to create queue"); |
| 2953 | } |
| 2954 | } |
| 2955 | return Status::OK; |
| 2956 | } |
| 2957 | |
Thiyagarajan Subramani | 8154d93 | 2019-11-13 05:29:06 -0500 | [diff] [blame] | 2958 | bcmos_errno RemoveQueue(std::string direction, uint32_t access_intf_id, uint32_t onu_id, uint32_t uni_id, |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2959 | bcmolt_egress_qos_type qos_type, uint32_t priority, uint32_t gemport_id, uint32_t tech_profile_id) { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2960 | bcmolt_tm_queue_cfg cfg; |
| 2961 | bcmolt_tm_queue_key key = { }; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2962 | bcmos_errno err; |
| 2963 | |
Thiyagarajan Subramani | e976fcf | 2021-05-07 22:46:57 +0530 | [diff] [blame] | 2964 | // Gemports are bi-directional (except in multicast case). We create the gem port when we create the |
| 2965 | // upstream/downstream queue (see CreateQueue function) and it makes sense to delete them when remove the queues. |
| 2966 | // For multicast case we do not manage the install/remove of gem port in agent application. It is managed by BAL. |
| 2967 | if (direction == upstream || direction == downstream) { |
Thiyagarajan Subramani | 19168f5 | 2021-05-25 23:26:41 +0530 | [diff] [blame] | 2968 | Status st = remove_gem_port(access_intf_id, onu_id, uni_id, gemport_id, board_technology); |
Thiyagarajan Subramani | e976fcf | 2021-05-07 22:46:57 +0530 | [diff] [blame] | 2969 | if (st.error_code() != grpc::StatusCode::OK) { |
| 2970 | OPENOLT_LOG(ERROR, openolt_log_id, "failed to remove gemport=%d, access_intf=%d, onu_id=%d\n", gemport_id, access_intf_id, onu_id); |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 2971 | // We should further cleanup proceed, do not return error yet.. |
| 2972 | // return BCM_ERR_INTERNAL; |
Thiyagarajan Subramani | e976fcf | 2021-05-07 22:46:57 +0530 | [diff] [blame] | 2973 | } |
Girish Gowdra | eec0fc9 | 2021-05-12 15:37:55 -0700 | [diff] [blame] | 2974 | if (direction == upstream) { |
| 2975 | // Remove the pon-gem to onu-uni mapping |
| 2976 | pon_gem pg(access_intf_id, gemport_id); |
| 2977 | bcmos_fastlock_lock(&pon_gem_to_onu_uni_map_lock); |
| 2978 | pon_gem_to_onu_uni_map.erase(pg); |
| 2979 | bcmos_fastlock_unlock(&pon_gem_to_onu_uni_map_lock, 0); |
| 2980 | } |
Thiyagarajan Subramani | e976fcf | 2021-05-07 22:46:57 +0530 | [diff] [blame] | 2981 | } |
| 2982 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2983 | if (direction == downstream) { |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 2984 | if (is_tm_sched_id_present(access_intf_id, onu_id, uni_id, direction, tech_profile_id)) { |
| 2985 | key.sched_id = get_tm_sched_id(access_intf_id, onu_id, uni_id, direction, tech_profile_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2986 | key.id = queue_id_list[priority]; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2987 | } else { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2988 | OPENOLT_LOG(INFO, openolt_log_id, "queue not present in DS. Not clearing, access_intf_id %d, onu_id %d, uni_id %d, gemport_id %d, direction %s\n", access_intf_id, onu_id, uni_id, gemport_id, direction.c_str()); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2989 | return BCM_ERR_OK; |
| 2990 | } |
| 2991 | } else { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2992 | /* In the upstream we use pre-created queues on the NNI scheduler that are used by all subscribers. |
| 2993 | They should not be removed. So, lets return OK. */ |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 2994 | return BCM_ERR_OK; |
| 2995 | } |
| 2996 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 2997 | if (qos_type == BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE) { |
| 2998 | key.tm_q_set_id = BCMOLT_TM_QUEUE_SET_ID_QSET_NOT_USE; |
| 2999 | // Reset the queue id to 0 when using fixed queue. |
| 3000 | key.id = 0; |
| 3001 | } |
| 3002 | else if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE) { |
| 3003 | key.tm_q_set_id = get_tm_qmp_id(key.sched_id, access_intf_id, onu_id, uni_id); |
| 3004 | } |
| 3005 | else { |
| 3006 | key.tm_q_set_id = BCMOLT_TM_QUEUE_KEY_TM_Q_SET_ID_DEFAULT; |
| 3007 | } |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3008 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3009 | BCMOLT_CFG_INIT(&cfg, tm_queue, key); |
| 3010 | err = bcmolt_cfg_clear(dev_id, &(cfg.hdr)); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3011 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 3012 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove queue, direction = %s, queue_id %d, sched_id %d, \ |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 3013 | tm_q_set_id %d, intf_id %d, onu_id %d, uni_id %d, err = %s (%d)\n", |
| 3014 | direction.c_str(), key.id, key.sched_id, key.tm_q_set_id, access_intf_id, onu_id, uni_id, cfg.hdr.hdr.err_text, err); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3015 | return err; |
| 3016 | } |
| 3017 | |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3018 | OPENOLT_LOG(INFO, openolt_log_id, "Removed tm_queue, direction %s, id %d, sched_id %d, tm_q_set_id %d, \ |
| 3019 | intf_id %d, onu_id %d, uni_id %d\n", direction.c_str(), key.id, key.sched_id, key.tm_q_set_id, access_intf_id, onu_id, uni_id); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3020 | |
| 3021 | return BCM_ERR_OK; |
| 3022 | } |
| 3023 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3024 | Status RemoveTrafficQueues_(const ::tech_profile::TrafficQueues *traffic_queues) { |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3025 | uint32_t intf_id = traffic_queues->intf_id(); |
| 3026 | uint32_t onu_id = traffic_queues->onu_id(); |
| 3027 | uint32_t uni_id = traffic_queues->uni_id(); |
| 3028 | uint32_t port_no = traffic_queues->port_no(); |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 3029 | uint32_t tech_profile_id = traffic_queues->tech_profile_id(); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3030 | uint32_t sched_id; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3031 | std::string direction; |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3032 | bcmos_errno err; |
Thiyagarajan Subramani | 8154d93 | 2019-11-13 05:29:06 -0500 | [diff] [blame] | 3033 | bcmolt_egress_qos_type qos_type = get_qos_type(intf_id, onu_id, uni_id, traffic_queues->traffic_queues_size()); |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 3034 | Status ret_code = Status::OK; |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3035 | |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3036 | for (int i = 0; i < traffic_queues->traffic_queues_size(); i++) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3037 | ::tech_profile::TrafficQueue traffic_queue = traffic_queues->traffic_queues(i); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3038 | |
| 3039 | direction = GetDirection(traffic_queue.direction()); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 3040 | if (direction == "direction-not-supported") { |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3041 | return bcm_to_grpc_err(BCM_ERR_PARM, "direction-not-supported"); |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 3042 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3043 | |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 3044 | err = RemoveQueue(direction, intf_id, onu_id, uni_id, qos_type, traffic_queue.priority(), traffic_queue.gemport_id(), tech_profile_id); |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3045 | if (err) { |
Thiyagarajan Subramani | 0890b1f | 2019-11-22 07:52:47 -0500 | [diff] [blame] | 3046 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove queue, err = %s\n",bcmos_strerror(err)); |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 3047 | ret_code = bcm_to_grpc_err(err, "Failed to remove one or more queues"); |
| 3048 | // Do not return here. We should continue to remove the remaining queues and its associated gem ports |
Girish Gowdru | c8ed2ef | 2019-02-13 08:18:44 -0800 | [diff] [blame] | 3049 | } |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 3050 | } |
| 3051 | |
Girish Gowdra | fc6c0bf | 2022-01-28 18:31:30 -0800 | [diff] [blame] | 3052 | if (qos_type == BCMOLT_EGRESS_QOS_TYPE_PRIORITY_TO_QUEUE && (direction == upstream || \ |
| 3053 | direction == downstream && is_tm_sched_id_present(intf_id, onu_id, uni_id, direction, tech_profile_id))) { |
| 3054 | sched_id = (direction == upstream) ? get_default_tm_sched_id(nni_intf_id, direction) : \ |
Burak Gurdag | 2f2618c | 2020-04-23 13:20:30 +0000 | [diff] [blame] | 3055 | get_tm_sched_id(intf_id, onu_id, uni_id, direction, tech_profile_id); |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3056 | |
| 3057 | int tm_qmp_id = get_tm_qmp_id(sched_id, intf_id, onu_id, uni_id); |
| 3058 | if (free_tm_qmp_id(sched_id, intf_id, onu_id, uni_id, tm_qmp_id)) { |
Thiyagarajan Subramani | 6dc2005 | 2019-12-05 09:06:36 -0500 | [diff] [blame] | 3059 | err = RemoveTrafficQueueMappingProfile(tm_qmp_id); |
| 3060 | if (err != BCM_ERR_OK) { |
| 3061 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to remove tm queue mapping profile, err = %s\n", bcmos_strerror(err)); |
| 3062 | return bcm_to_grpc_err(err, "Failed to remove tm queue mapping profile"); |
| 3063 | } |
Thiyagarajan Subramani | 89fffc0 | 2019-05-13 21:33:20 +0000 | [diff] [blame] | 3064 | } |
| 3065 | } |
Thiyagarajan Subramani | 8154d93 | 2019-11-13 05:29:06 -0500 | [diff] [blame] | 3066 | clear_qos_type(intf_id, onu_id, uni_id); |
Girish Gowdra | 72cbee9 | 2021-11-05 15:16:18 -0700 | [diff] [blame] | 3067 | return ret_code; |
Jonathan Davis | 70c2181 | 2018-07-19 15:32:10 -0400 | [diff] [blame] | 3068 | } |
Jason Huang | bf45ffb | 2019-10-30 17:29:02 +0800 | [diff] [blame] | 3069 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3070 | Status PerformGroupOperation_(const ::openolt::Group *group_cfg) { |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3071 | |
| 3072 | bcmos_errno err; |
| 3073 | bcmolt_group_key key = {}; |
| 3074 | bcmolt_group_cfg grp_cfg_obj; |
| 3075 | bcmolt_group_members_update grp_mem_upd; |
| 3076 | bcmolt_members_update_command grp_mem_upd_cmd; |
| 3077 | bcmolt_group_member_info member_info = {}; |
| 3078 | bcmolt_group_member_info_list_u8 members = {}; |
| 3079 | bcmolt_intf_ref interface_ref = {}; |
| 3080 | bcmolt_egress_qos egress_qos = {}; |
| 3081 | bcmolt_tm_sched_ref tm_sched_ref = {}; |
| 3082 | bcmolt_action a_val = {}; |
| 3083 | |
| 3084 | uint32_t group_id = group_cfg->group_id(); |
| 3085 | |
| 3086 | OPENOLT_LOG(INFO, openolt_log_id, "PerformGroupOperation request received for Group %d\n", group_id); |
| 3087 | |
| 3088 | if (group_id >= 0) { |
| 3089 | key.id = group_id; |
| 3090 | } |
| 3091 | else { |
| 3092 | OPENOLT_LOG(ERROR, openolt_log_id, "Invalid group id %d.\n", group_id); |
| 3093 | return grpc::Status(grpc::StatusCode::INVALID_ARGUMENT, "Invalid group id"); |
| 3094 | } |
| 3095 | |
| 3096 | BCMOLT_CFG_INIT(&grp_cfg_obj, group, key); |
| 3097 | BCMOLT_FIELD_SET_PRESENT(&grp_cfg_obj.data, group_cfg_data, state); |
| 3098 | |
| 3099 | OPENOLT_LOG(INFO, openolt_log_id, "Checking if Group %d exists...\n",group_id); |
| 3100 | |
| 3101 | err = bcmolt_cfg_get(dev_id, &(grp_cfg_obj.hdr)); |
| 3102 | if (err != BCM_ERR_OK) { |
| 3103 | OPENOLT_LOG(ERROR, openolt_log_id, "Error in querying Group %d, err = %s\n", group_id, bcmos_strerror(err)); |
| 3104 | return bcm_to_grpc_err(err, "Error in querying group"); |
| 3105 | } |
| 3106 | |
| 3107 | members.len = group_cfg->members_size(); |
| 3108 | |
| 3109 | // IMPORTANT: A member cannot be added to a group if the group type is not determined. |
| 3110 | // Group type is determined after a flow is assigned to it. |
| 3111 | // Therefore, a group must be created first, then a flow (with multicast type) must be assigned to it. |
| 3112 | // Only then we can add members to the group. |
| 3113 | |
| 3114 | // if group does not exist, create it and return. |
| 3115 | if (grp_cfg_obj.data.state == BCMOLT_GROUP_STATE_NOT_CONFIGURED) { |
| 3116 | |
| 3117 | if (members.len != 0) { |
| 3118 | OPENOLT_LOG(ERROR, openolt_log_id, "Member list is not empty for non-existent Group %d. Members can be added only after a flow is assigned to this newly-created group.\n", group_id); |
| 3119 | return grpc::Status(grpc::StatusCode::INVALID_ARGUMENT, "Non-empty member list given for non-existent group"); |
| 3120 | } else { |
| 3121 | |
| 3122 | BCMOLT_CFG_INIT(&grp_cfg_obj, group, key); |
| 3123 | BCMOLT_MSG_FIELD_SET(&grp_cfg_obj, cookie, key.id); |
| 3124 | |
| 3125 | /* Setting group actions and action parameters, if any. |
| 3126 | Only remove_outer_tag and translate_inner_tag actions and i_vid action parameter |
| 3127 | are supported for multicast groups in BAL 3.1. |
| 3128 | */ |
| 3129 | const ::openolt::Action& action = group_cfg->action(); |
| 3130 | const ::openolt::ActionCmd &cmd = action.cmd(); |
| 3131 | |
| 3132 | bcmolt_action_cmd_id cmd_bmask = BCMOLT_ACTION_CMD_ID_NONE; |
| 3133 | if (cmd.remove_outer_tag()) { |
| 3134 | OPENOLT_LOG(INFO, openolt_log_id, "Action remove_outer_tag applied to Group %d.\n", group_id); |
| 3135 | cmd_bmask = (bcmolt_action_cmd_id) (cmd_bmask | BCMOLT_ACTION_CMD_ID_REMOVE_OUTER_TAG); |
| 3136 | } |
| 3137 | |
| 3138 | if (cmd.translate_inner_tag()) { |
| 3139 | OPENOLT_LOG(INFO, openolt_log_id, "Action translate_inner_tag applied to Group %d.\n", group_id); |
| 3140 | cmd_bmask = (bcmolt_action_cmd_id) (cmd_bmask | BCMOLT_ACTION_CMD_ID_XLATE_INNER_TAG); |
| 3141 | } |
| 3142 | |
| 3143 | BCMOLT_FIELD_SET(&a_val, action, cmds_bitmask, cmd_bmask); |
| 3144 | |
| 3145 | if (action.i_vid()) { |
| 3146 | OPENOLT_LOG(INFO, openolt_log_id, "Setting action parameter i_vid=%d for Group %d.\n", action.i_vid(), group_id); |
| 3147 | BCMOLT_FIELD_SET(&a_val, action, i_vid, action.i_vid()); |
| 3148 | } |
| 3149 | |
| 3150 | BCMOLT_MSG_FIELD_SET(&grp_cfg_obj, action, a_val); |
| 3151 | |
| 3152 | // Create group |
| 3153 | err = bcmolt_cfg_set(dev_id, &(grp_cfg_obj.hdr)); |
| 3154 | |
| 3155 | if (BCM_ERR_OK != err) { |
| 3156 | BCM_LOG(ERROR, openolt_log_id, "Failed to create Group %d, err = %s (%d)\n", key.id, bcmos_strerror(err), err); |
| 3157 | return bcm_to_grpc_err(err, "Error in creating group"); |
| 3158 | } |
| 3159 | |
| 3160 | BCM_LOG(INFO, openolt_log_id, "Group %d has been created and configured with empty member list.\n", key.id); |
| 3161 | return Status::OK; |
| 3162 | } |
| 3163 | } |
| 3164 | |
| 3165 | // The group already exists. Continue configuring it according to the update member command. |
| 3166 | |
| 3167 | OPENOLT_LOG(INFO, openolt_log_id, "Configuring existing Group %d.\n",group_id); |
| 3168 | |
| 3169 | // MEMBER LIST CONSTRUCTION |
| 3170 | // Note that members.len can be 0 here. if the group already exists and the command is SET then sending |
| 3171 | // empty list to the group is a legit operation and this actually empties the member list. |
| 3172 | members.arr = (bcmolt_group_member_info*)bcmos_calloc((members.len)*sizeof(bcmolt_group_member_info)); |
| 3173 | |
| 3174 | if (!members.arr) { |
| 3175 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to allocate memory for group member list.\n"); |
| 3176 | return grpc::Status(grpc::StatusCode::RESOURCE_EXHAUSTED, "Memory exhausted during member list creation"); |
| 3177 | } |
| 3178 | |
| 3179 | /* SET GROUP MEMBERS UPDATE COMMAND */ |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3180 | ::openolt::Group::GroupMembersCommand command = group_cfg->command(); |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3181 | switch(command) { |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3182 | case ::openolt::Group::SET_MEMBERS : |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3183 | grp_mem_upd_cmd = BCMOLT_MEMBERS_UPDATE_COMMAND_SET; |
| 3184 | OPENOLT_LOG(INFO, openolt_log_id, "Setting %d members for Group %d.\n", members.len, group_id); |
| 3185 | break; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3186 | case ::openolt::Group::ADD_MEMBERS : |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3187 | grp_mem_upd_cmd = BCMOLT_MEMBERS_UPDATE_COMMAND_ADD; |
| 3188 | OPENOLT_LOG(INFO, openolt_log_id, "Adding %d members to Group %d.\n", members.len, group_id); |
| 3189 | break; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3190 | case ::openolt::Group::REMOVE_MEMBERS : |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3191 | grp_mem_upd_cmd = BCMOLT_MEMBERS_UPDATE_COMMAND_REMOVE; |
| 3192 | OPENOLT_LOG(INFO, openolt_log_id, "Removing %d members from Group %d.\n", members.len, group_id); |
| 3193 | break; |
| 3194 | default : |
| 3195 | OPENOLT_LOG(ERROR, openolt_log_id, "Invalid value %d for group member command.\n", command); |
| 3196 | bcmos_free(members.arr); |
| 3197 | return grpc::Status(grpc::StatusCode::INVALID_ARGUMENT, "Invalid group member command"); |
| 3198 | } |
| 3199 | |
| 3200 | // SET MEMBERS LIST |
| 3201 | for (int i = 0; i < members.len; i++) { |
| 3202 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3203 | if (command == ::openolt::Group::REMOVE_MEMBERS) { |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3204 | OPENOLT_LOG(INFO, openolt_log_id, "Removing group member %d from group %d\n",i,key.id); |
| 3205 | } else { |
| 3206 | OPENOLT_LOG(INFO, openolt_log_id, "Adding group member %d to group %d\n",i,key.id); |
| 3207 | } |
| 3208 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3209 | ::openolt::GroupMember *member = (::openolt::GroupMember *) &group_cfg->members()[i]; |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3210 | |
| 3211 | // Set member interface type |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3212 | ::openolt::GroupMember::InterfaceType if_type = member->interface_type(); |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3213 | switch(if_type){ |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3214 | case ::openolt::GroupMember::PON : |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3215 | BCMOLT_FIELD_SET(&interface_ref, intf_ref, intf_type, BCMOLT_INTERFACE_TYPE_PON); |
| 3216 | OPENOLT_LOG(INFO, openolt_log_id, "Interface type PON is assigned to GroupMember %d\n",i); |
| 3217 | break; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3218 | case ::openolt::GroupMember::EPON_1G_PATH : |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3219 | BCMOLT_FIELD_SET(&interface_ref, intf_ref, intf_type, BCMOLT_INTERFACE_TYPE_EPON_1_G); |
| 3220 | OPENOLT_LOG(INFO, openolt_log_id, "Interface type EPON_1G is assigned to GroupMember %d\n",i); |
| 3221 | break; |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3222 | case ::openolt::GroupMember::EPON_10G_PATH : |
Burak Gurdag | c78b9e1 | 2019-11-29 11:14:51 +0000 | [diff] [blame] | 3223 | BCMOLT_FIELD_SET(&interface_ref, intf_ref, intf_type, BCMOLT_INTERFACE_TYPE_EPON_10_G); |
| 3224 | OPENOLT_LOG(INFO, openolt_log_id, "Interface type EPON_10G is assigned to GroupMember %d\n",i); |
| 3225 | break; |
| 3226 | default : |
| 3227 | OPENOLT_LOG(ERROR, openolt_log_id, "Invalid interface type value %d for GroupMember %d.\n",if_type,i); |
| 3228 | bcmos_free(members.arr); |
| 3229 | return grpc::Status(grpc::StatusCode::INVALID_ARGUMENT, "Invalid interface type for a group member"); |
| 3230 | } |
| 3231 | |
| 3232 | // Set member interface id |
| 3233 | if (member->interface_id() >= 0) { |
| 3234 | BCMOLT_FIELD_SET(&interface_ref, intf_ref, intf_id, member->interface_id()); |
| 3235 | OPENOLT_LOG(INFO, openolt_log_id, "Interface %d is assigned to GroupMember %d\n", member->interface_id(), i); |
| 3236 | } else { |
| 3237 | bcmos_free(members.arr); |
| 3238 | return grpc::Status(grpc::StatusCode::INVALID_ARGUMENT, "Invalid interface id for a group member"); |
| 3239 | } |
| 3240 | |
| 3241 | // Set member interface_ref |
| 3242 | BCMOLT_FIELD_SET(&member_info, group_member_info, intf, interface_ref); |
| 3243 | |
| 3244 | // Set member gem_port_id. This must be a multicast gemport. |
| 3245 | if (member->gem_port_id() >= 0) { |
| 3246 | BCMOLT_FIELD_SET(&member_info, group_member_info, svc_port_id, member->gem_port_id()); |
| 3247 | OPENOLT_LOG(INFO, openolt_log_id, "GEM Port %d is assigned to GroupMember %d\n", member->gem_port_id(), i); |
| 3248 | } else { |
| 3249 | bcmos_free(members.arr); |
| 3250 | return grpc::Status(grpc::StatusCode::INVALID_ARGUMENT, "Invalid gem port id for a group member"); |
| 3251 | } |
| 3252 | |
| 3253 | // Set member scheduler id and queue_id |
| 3254 | uint32_t tm_sched_id = get_default_tm_sched_id(member->interface_id(), downstream); |
| 3255 | OPENOLT_LOG(INFO, openolt_log_id, "Scheduler %d is assigned to GroupMember %d\n", tm_sched_id, i); |
| 3256 | BCMOLT_FIELD_SET(&tm_sched_ref, tm_sched_ref, id, tm_sched_id); |
| 3257 | BCMOLT_FIELD_SET(&egress_qos, egress_qos, tm_sched, tm_sched_ref); |
| 3258 | |
| 3259 | // We assume that all multicast traffic destined to a PON port is using the same fixed queue. |
| 3260 | uint32_t tm_queue_id; |
| 3261 | if (member->priority() >= 0 && member->priority() < NUMBER_OF_DEFAULT_INTERFACE_QUEUES) { |
| 3262 | tm_queue_id = queue_id_list[member->priority()]; |
| 3263 | OPENOLT_LOG(INFO, openolt_log_id, "Queue %d is assigned to GroupMember %d\n", tm_queue_id, i); |
| 3264 | BCMOLT_FIELD_SET(&egress_qos, egress_qos, type, BCMOLT_EGRESS_QOS_TYPE_FIXED_QUEUE); |
| 3265 | BCMOLT_FIELD_SET(&egress_qos.u.fixed_queue, egress_qos_fixed_queue, queue_id, tm_queue_id); |
| 3266 | } else { |
| 3267 | OPENOLT_LOG(ERROR, openolt_log_id, "Invalid fixed queue priority/ID %d for GroupMember %d\n", member->priority(), i); |
| 3268 | bcmos_free(members.arr); |
| 3269 | return grpc::Status(grpc::StatusCode::INVALID_ARGUMENT, "Invalid queue priority for a group member"); |
| 3270 | } |
| 3271 | |
| 3272 | BCMOLT_FIELD_SET(&member_info, group_member_info, egress_qos, egress_qos); |
| 3273 | BCMOLT_ARRAY_ELEM_SET(&(members), i, member_info); |
| 3274 | } |
| 3275 | |
| 3276 | BCMOLT_OPER_INIT(&grp_mem_upd, group, members_update, key); |
| 3277 | BCMOLT_MSG_FIELD_SET(&grp_mem_upd, members_cmd.members, members); |
| 3278 | BCMOLT_MSG_FIELD_SET(&grp_mem_upd, members_cmd.command, grp_mem_upd_cmd); |
| 3279 | |
| 3280 | err = bcmolt_oper_submit(dev_id, &(grp_mem_upd.hdr)); |
| 3281 | bcmos_free(members.arr); |
| 3282 | |
| 3283 | if (BCM_ERR_OK != err) { |
| 3284 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to submit members update operation for Group %d err = %s (%d)\n", key.id, bcmos_strerror(err), err); |
| 3285 | return bcm_to_grpc_err(err, "Failed to submit members update operation for the group"); |
| 3286 | } |
| 3287 | |
| 3288 | OPENOLT_LOG(INFO, openolt_log_id, "Successfully submitted members update operation for Group %d\n", key.id); |
| 3289 | |
| 3290 | return Status::OK; |
| 3291 | } |
Burak Gurdag | eb4ca2e | 2020-06-15 07:48:26 +0000 | [diff] [blame] | 3292 | |
| 3293 | Status DeleteGroup_(uint32_t group_id) { |
| 3294 | |
| 3295 | bcmos_errno err = BCM_ERR_OK; |
| 3296 | bcmolt_group_cfg grp_cfg_obj; |
| 3297 | bcmolt_group_key key = {}; |
| 3298 | |
| 3299 | |
| 3300 | OPENOLT_LOG(INFO, openolt_log_id, "Delete request received for group %d\n", group_id); |
| 3301 | |
| 3302 | if (group_id >= 0) { |
| 3303 | key.id = group_id; |
| 3304 | } else { |
| 3305 | OPENOLT_LOG(ERROR, openolt_log_id, "Invalid group id %d.\n", group_id); |
| 3306 | return grpc::Status(grpc::StatusCode::INVALID_ARGUMENT, "Invalid group id"); |
| 3307 | } |
| 3308 | |
| 3309 | /* init the BAL INIT API */ |
| 3310 | BCMOLT_CFG_INIT(&grp_cfg_obj, group, key); |
| 3311 | |
| 3312 | OPENOLT_LOG(DEBUG, openolt_log_id, "Checking if group %d exists...\n",group_id); |
| 3313 | |
| 3314 | // CONFIGURE GROUP MEMBERS |
| 3315 | BCMOLT_FIELD_SET_PRESENT(&grp_cfg_obj.data, group_cfg_data, state); |
| 3316 | err = bcmolt_cfg_get(dev_id, &(grp_cfg_obj.hdr)); |
| 3317 | |
| 3318 | if (err != BCM_ERR_OK) { |
| 3319 | OPENOLT_LOG(ERROR, openolt_log_id, "Error in querying Group %d, err = %s\n", group_id, bcmos_strerror(err)); |
| 3320 | return bcm_to_grpc_err(err, "Error in querying group"); |
| 3321 | } |
| 3322 | |
| 3323 | if (grp_cfg_obj.data.state != BCMOLT_GROUP_STATE_NOT_CONFIGURED) { |
| 3324 | OPENOLT_LOG(DEBUG, openolt_log_id, "Group %d exists. Will be deleted.\n",group_id); |
| 3325 | err = bcmolt_cfg_clear(dev_id, &(grp_cfg_obj.hdr)); |
| 3326 | if (err != BCM_ERR_OK) { |
| 3327 | OPENOLT_LOG(ERROR, openolt_log_id, "Group %d cannot be deleted err = %s (%d).\n", group_id, bcmos_strerror(err), err); |
| 3328 | return bcm_to_grpc_err(err, "Failed to delete group");; |
| 3329 | } |
| 3330 | } else { |
| 3331 | OPENOLT_LOG(ERROR, openolt_log_id, "Group %d does not exist.\n", group_id); |
| 3332 | return Status(grpc::StatusCode::NOT_FOUND, "Group not found"); |
| 3333 | } |
| 3334 | |
| 3335 | OPENOLT_LOG(INFO, openolt_log_id, "Group %d has been deleted successfully.\n", group_id); |
| 3336 | return Status::OK; |
Jason Huang | 1d9cfce | 2020-05-20 22:58:47 +0800 | [diff] [blame] | 3337 | } |
| 3338 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3339 | Status GetLogicalOnuDistanceZero_(uint32_t intf_id, ::openolt::OnuLogicalDistance* response) { |
Jason Huang | 1d9cfce | 2020-05-20 22:58:47 +0800 | [diff] [blame] | 3340 | bcmos_errno err = BCM_ERR_OK; |
| 3341 | uint32_t mld = 0; |
| 3342 | double LD0; |
| 3343 | |
| 3344 | err = getOnuMaxLogicalDistance(intf_id, &mld); |
| 3345 | if (err != BCM_ERR_OK) { |
| 3346 | return bcm_to_grpc_err(err, "Failed to retrieve ONU maximum logical distance"); |
| 3347 | } |
| 3348 | |
| 3349 | LD0 = LOGICAL_DISTANCE(mld*1000, MINIMUM_ONU_RESPONSE_RANGING_TIME, ONU_BIT_TRANSMISSION_DELAY); |
| 3350 | OPENOLT_LOG(INFO, openolt_log_id, "The ONU logical distance zero is %f, (PON %d)\n", LD0, intf_id); |
| 3351 | response->set_intf_id(intf_id); |
| 3352 | response->set_logical_onu_distance_zero(LD0); |
| 3353 | |
| 3354 | return Status::OK; |
| 3355 | } |
| 3356 | |
Girish Gowdra | 252f497 | 2020-09-07 21:24:01 -0700 | [diff] [blame] | 3357 | Status GetLogicalOnuDistance_(uint32_t intf_id, uint32_t onu_id, ::openolt::OnuLogicalDistance* response) { |
Jason Huang | 1d9cfce | 2020-05-20 22:58:47 +0800 | [diff] [blame] | 3358 | bcmos_errno err = BCM_ERR_OK; |
| 3359 | bcmolt_itu_onu_params itu = {}; |
| 3360 | bcmolt_onu_cfg onu_cfg; |
| 3361 | bcmolt_onu_key onu_key = {}; |
| 3362 | uint32_t mld = 0; |
| 3363 | double LDi; |
| 3364 | |
| 3365 | onu_key.pon_ni = intf_id; |
| 3366 | onu_key.onu_id = onu_id; |
| 3367 | |
| 3368 | err = getOnuMaxLogicalDistance(intf_id, &mld); |
| 3369 | if (err != BCM_ERR_OK) { |
| 3370 | return bcm_to_grpc_err(err, "Failed to retrieve ONU maximum logical distance"); |
| 3371 | } |
| 3372 | |
| 3373 | /* Initialize the API struct. */ |
| 3374 | BCMOLT_CFG_INIT(&onu_cfg, onu, onu_key); |
| 3375 | BCMOLT_FIELD_SET_PRESENT(&onu_cfg.data, onu_cfg_data, onu_state); |
| 3376 | BCMOLT_FIELD_SET_PRESENT(&itu, itu_onu_params, ranging_time); |
| 3377 | BCMOLT_FIELD_SET(&onu_cfg.data, onu_cfg_data, itu, itu); |
| 3378 | #ifdef TEST_MODE |
| 3379 | // It is impossible to mock the setting of onu_cfg.data.onu_state because |
| 3380 | // the actual bcmolt_cfg_get passes the address of onu_cfg.hdr and we cannot |
| 3381 | // set the onu_cfg.data.onu_state. So a new stub function is created and address |
| 3382 | // of onu_cfg is passed. This is one-of case where we need to add test specific |
| 3383 | // code in production code. |
| 3384 | err = bcmolt_cfg_get__onu_state_stub(dev_id, &onu_cfg); |
| 3385 | #else |
| 3386 | /* Call API function. */ |
| 3387 | err = bcmolt_cfg_get(dev_id, &onu_cfg.hdr); |
| 3388 | #endif |
| 3389 | if (err != BCM_ERR_OK) { |
| 3390 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to retrieve ONU ranging time for PON %d/ONU id %d, err = %s (%d)\n", intf_id, onu_id, bcmos_strerror(err), err); |
| 3391 | return bcm_to_grpc_err(err, "Failed to retrieve ONU ranging time"); |
| 3392 | } |
| 3393 | |
| 3394 | if (onu_cfg.data.onu_state != BCMOLT_ONU_STATE_ACTIVE) { |
| 3395 | OPENOLT_LOG(ERROR, openolt_log_id, "ONU is not yet activated (PON %d, ONU id %d)\n", intf_id, onu_id); |
| 3396 | return bcm_to_grpc_err(BCM_ERR_PARM, "ONU is not yet activated\n"); |
| 3397 | } |
| 3398 | |
| 3399 | LDi = LOGICAL_DISTANCE(mld*1000, onu_cfg.data.itu.ranging_time, ONU_BIT_TRANSMISSION_DELAY); |
| 3400 | OPENOLT_LOG(INFO, openolt_log_id, "The ONU logical distance is %f, (PON %d, ONU id %d)\n", LDi, intf_id, onu_id); |
| 3401 | response->set_intf_id(intf_id); |
| 3402 | response->set_onu_id(onu_id); |
| 3403 | response->set_logical_onu_distance(LDi); |
| 3404 | |
| 3405 | return Status::OK; |
| 3406 | } |
Burak Gurdag | 74e3ab8 | 2020-12-17 13:35:06 +0000 | [diff] [blame] | 3407 | |
| 3408 | Status GetOnuStatistics_(uint32_t intf_id, uint32_t onu_id, openolt::OnuStatistics* onu_stats) { |
| 3409 | bcmos_errno err; |
| 3410 | |
| 3411 | err = get_onu_statistics((bcmolt_interface_id)intf_id, (bcmolt_onu_id)onu_id, onu_stats); |
| 3412 | |
| 3413 | if (err != BCM_ERR_OK) { |
| 3414 | OPENOLT_LOG(ERROR, openolt_log_id, "retrieval of ONU statistics failed - PON ID = %u, ONU ID = %u, err = %d - %s", intf_id, onu_id, err, bcmos_strerror(err)); |
| 3415 | return grpc::Status(grpc::StatusCode::INTERNAL, "retrieval of ONU statistics failed"); |
| 3416 | } |
| 3417 | |
| 3418 | OPENOLT_LOG(INFO, openolt_log_id, "retrieved ONU statistics for PON ID = %d, ONU ID = %d\n", (int)intf_id, (int)onu_id); |
| 3419 | return Status::OK; |
| 3420 | } |
| 3421 | |
| 3422 | Status GetGemPortStatistics_(uint32_t intf_id, uint32_t gemport_id, openolt::GemPortStatistics* gemport_stats) { |
| 3423 | bcmos_errno err; |
| 3424 | |
| 3425 | err = get_gemport_statistics((bcmolt_interface_id)intf_id, (bcmolt_gem_port_id)gemport_id, gemport_stats); |
| 3426 | |
| 3427 | if (err != BCM_ERR_OK) { |
| 3428 | OPENOLT_LOG(ERROR, openolt_log_id, "retrieval of GEMPORT statistics failed - PON ID = %u, ONU ID = %u, err = %d - %s", intf_id, gemport_id, err, bcmos_strerror(err)); |
| 3429 | return grpc::Status(grpc::StatusCode::INTERNAL, "retrieval of GEMPORT statistics failed"); |
| 3430 | } |
| 3431 | |
| 3432 | OPENOLT_LOG(INFO, openolt_log_id, "retrieved GEMPORT statistics for PON ID = %d, GEMPORT ID = %d\n", (int)intf_id, (int)gemport_id); |
| 3433 | return Status::OK; |
| 3434 | } |
Orhan Kupusoglu | ec57af0 | 2021-05-12 12:38:17 +0000 | [diff] [blame] | 3435 | |
| 3436 | Status GetPonRxPower_(uint32_t intf_id, uint32_t onu_id, openolt::PonRxPowerData* response) { |
| 3437 | bcmos_errno err = BCM_ERR_OK; |
| 3438 | |
| 3439 | // check the PON intf id |
| 3440 | if (intf_id >= MAX_SUPPORTED_PON) { |
| 3441 | err = BCM_ERR_PARM; |
| 3442 | OPENOLT_LOG(ERROR, openolt_log_id, "invalid pon intf_id - intf_id: %d, onu_id: %d\n", |
| 3443 | intf_id, onu_id); |
| 3444 | return bcm_to_grpc_err(err, "invalid pon intf_id"); |
| 3445 | } |
| 3446 | |
| 3447 | bcmolt_onu_rssi_measurement onu_oper; /* declare main API struct */ |
| 3448 | bcmolt_onu_key onu_key; /**< Object key. */ |
| 3449 | onu_rssi_compltd_key key(intf_id, onu_id); |
| 3450 | Queue<onu_rssi_complete_result> queue; |
| 3451 | |
| 3452 | OPENOLT_LOG(INFO, openolt_log_id, "GetPonRxPower - intf_id %d, onu_id %d\n", intf_id, onu_id); |
| 3453 | |
| 3454 | onu_key.onu_id = onu_id; |
| 3455 | onu_key.pon_ni = intf_id; |
| 3456 | /* Initialize the API struct. */ |
| 3457 | BCMOLT_OPER_INIT(&onu_oper, onu, rssi_measurement, onu_key); |
| 3458 | err = bcmolt_oper_submit(dev_id, &onu_oper.hdr); |
| 3459 | if (err == BCM_ERR_OK) { |
| 3460 | // initialize map |
| 3461 | bcmos_fastlock_lock(&onu_rssi_wait_lock); |
| 3462 | onu_rssi_compltd_map.insert({key, &queue}); |
| 3463 | bcmos_fastlock_unlock(&onu_rssi_wait_lock, 0); |
| 3464 | } else { |
| 3465 | OPENOLT_LOG(ERROR, openolt_log_id, "failed to measure rssi rx power - intf_id: %d, onu_id: %d, err = %s (%d): %s\n", |
| 3466 | intf_id, onu_id, bcmos_strerror(err), err, onu_oper.hdr.hdr.err_text); |
| 3467 | return bcm_to_grpc_err(err, "failed to measure rssi rx power"); |
| 3468 | } |
| 3469 | |
| 3470 | onu_rssi_complete_result completed{}; |
| 3471 | if (!queue.pop(completed, ONU_RSSI_COMPLETE_WAIT_TIMEOUT)) { |
| 3472 | // invalidate the queue pointer |
| 3473 | bcmos_fastlock_lock(&onu_rssi_wait_lock); |
| 3474 | onu_rssi_compltd_map[key] = NULL; |
| 3475 | bcmos_fastlock_unlock(&onu_rssi_wait_lock, 0); |
| 3476 | err = BCM_ERR_TIMEOUT; |
| 3477 | OPENOLT_LOG(ERROR, openolt_log_id, "timeout waiting for RSSI Measurement Completed indication intf_id %d, onu_id %d\n", |
| 3478 | intf_id, onu_id); |
| 3479 | } else { |
| 3480 | OPENOLT_LOG(INFO, openolt_log_id, "RSSI Rx power - intf_id: %d, onu_id: %d, status: %s, fail_reason: %d, rx_power_mean_dbm: %f\n", |
| 3481 | completed.pon_intf_id, completed.onu_id, completed.status.c_str(), completed.reason, completed.rx_power_mean_dbm); |
| 3482 | |
| 3483 | response->set_intf_id(completed.pon_intf_id); |
| 3484 | response->set_onu_id(completed.onu_id); |
| 3485 | response->set_status(completed.status); |
| 3486 | response->set_fail_reason(static_cast<::openolt::PonRxPowerData_RssiMeasurementFailReason>(completed.reason)); |
| 3487 | response->set_rx_power_mean_dbm(completed.rx_power_mean_dbm); |
| 3488 | } |
| 3489 | |
| 3490 | // Remove entry from map |
| 3491 | bcmos_fastlock_lock(&onu_rssi_wait_lock); |
| 3492 | onu_rssi_compltd_map.erase(key); |
| 3493 | bcmos_fastlock_unlock(&onu_rssi_wait_lock, 0); |
| 3494 | |
| 3495 | if (err == BCM_ERR_OK) { |
| 3496 | return Status::OK; |
| 3497 | } else { |
| 3498 | return bcm_to_grpc_err(err, "timeout waiting for pon rssi measurement complete indication"); |
| 3499 | } |
| 3500 | } |
nikesh.krishnan | 331d38c | 2023-04-06 03:24:53 +0530 | [diff] [blame] | 3501 | |
| 3502 | Status GetOnuInfo_(uint32_t intf_id, uint32_t onu_id, openolt::OnuInfo *response) |
| 3503 | { |
| 3504 | bcmos_errno err = BCM_ERR_OK; |
| 3505 | |
| 3506 | bcmolt_onu_state onu_state; |
| 3507 | |
| 3508 | bcmolt_status losi; |
| 3509 | bcmolt_status lofi; |
| 3510 | bcmolt_status loami; |
| 3511 | err = get_gpon_onu_info((bcmolt_interface)intf_id, onu_id, &onu_state, &losi, &lofi, &loami); |
| 3512 | |
| 3513 | if (err == BCM_ERR_OK) |
| 3514 | { |
| 3515 | |
| 3516 | response->set_onu_id(onu_id); |
| 3517 | OPENOLT_LOG(DEBUG, openolt_log_id, "onu state %d\n", onu_state); |
| 3518 | OPENOLT_LOG(DEBUG, openolt_log_id, "losi %d\n", losi); |
| 3519 | OPENOLT_LOG(DEBUG, openolt_log_id, "lofi %d\n", lofi); |
| 3520 | OPENOLT_LOG(DEBUG, openolt_log_id, "loami %d\n", loami); |
| 3521 | |
| 3522 | switch (onu_state) |
| 3523 | { |
| 3524 | case bcmolt_onu_state::BCMOLT_ONU_STATE_ACTIVE: |
| 3525 | response->set_state(openolt::OnuInfo_OnuState::OnuInfo_OnuState_ACTIVE); |
| 3526 | break; |
| 3527 | case bcmolt_onu_state::BCMOLT_ONU_STATE_INACTIVE: |
| 3528 | response->set_state(openolt::OnuInfo_OnuState::OnuInfo_OnuState_INACTIVE); |
| 3529 | break; |
| 3530 | case bcmolt_onu_state::BCMOLT_ONU_STATE_UNAWARE: |
| 3531 | response->set_state(openolt::OnuInfo_OnuState::OnuInfo_OnuState_UNKNOWN); |
| 3532 | break; |
| 3533 | case bcmolt_onu_state::BCMOLT_ONU_STATE_NOT_CONFIGURED: |
| 3534 | response->set_state(openolt::OnuInfo_OnuState::OnuInfo_OnuState_NOT_CONFIGURED); |
| 3535 | break; |
| 3536 | case bcmolt_onu_state::BCMOLT_ONU_STATE_DISABLED: |
| 3537 | response->set_state(openolt::OnuInfo_OnuState::OnuInfo_OnuState_DISABLED); |
| 3538 | break; |
| 3539 | } |
| 3540 | switch (losi) |
| 3541 | { |
| 3542 | case bcmolt_status::BCMOLT_STATUS_ON: |
| 3543 | response->set_losi(openolt::AlarmState::ON); |
| 3544 | break; |
| 3545 | case bcmolt_status::BCMOLT_STATUS_OFF: |
| 3546 | response->set_losi(openolt::AlarmState::OFF); |
| 3547 | break; |
| 3548 | } |
| 3549 | |
| 3550 | switch (lofi) |
| 3551 | { |
| 3552 | case bcmolt_status::BCMOLT_STATUS_ON: |
| 3553 | response->set_lofi(openolt::AlarmState::ON); |
| 3554 | break; |
| 3555 | case bcmolt_status::BCMOLT_STATUS_OFF: |
| 3556 | response->set_lofi(openolt::AlarmState::OFF); |
| 3557 | break; |
| 3558 | } |
| 3559 | |
| 3560 | switch (loami) |
| 3561 | { |
| 3562 | case bcmolt_status::BCMOLT_STATUS_ON: |
| 3563 | response->set_loami(openolt::AlarmState::ON); |
| 3564 | break; |
| 3565 | case bcmolt_status::BCMOLT_STATUS_OFF: |
| 3566 | response->set_loami(openolt::AlarmState::OFF); |
| 3567 | break; |
| 3568 | } |
| 3569 | return Status::OK; |
| 3570 | } |
| 3571 | else |
| 3572 | { |
| 3573 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to fetch Onu status, onu_id = %d, intf_id = %d, err = %s\n", |
| 3574 | onu_id, intf_id, bcmos_strerror(err)); |
| 3575 | return bcm_to_grpc_err(err, "Failed to fetch Onu status"); |
| 3576 | } |
| 3577 | } |
| 3578 | |
| 3579 | Status GetPonInterfaceInfo_(uint32_t intf_id, openolt::PonIntfInfo *response) |
| 3580 | { |
| 3581 | bcmos_errno err = BCM_ERR_OK; |
| 3582 | |
| 3583 | bcmolt_status los_status; |
| 3584 | bcmolt_interface_state state; |
| 3585 | err = get_pon_interface_status((bcmolt_interface)intf_id, &state, &los_status); |
| 3586 | OPENOLT_LOG(ERROR, openolt_log_id, "pon state %d\n",state); |
| 3587 | OPENOLT_LOG(ERROR, openolt_log_id, "pon los status %d\n", los_status); |
| 3588 | |
| 3589 | |
| 3590 | if (err == BCM_ERR_OK) |
| 3591 | { |
| 3592 | response->set_intf_id(intf_id) ; |
| 3593 | switch (los_status) |
| 3594 | { |
| 3595 | case bcmolt_status::BCMOLT_STATUS_ON: |
| 3596 | |
| 3597 | response->set_los(openolt::AlarmState::ON); |
| 3598 | break; |
| 3599 | case bcmolt_status::BCMOLT_STATUS_OFF: |
| 3600 | response->set_los(openolt::AlarmState::OFF); |
| 3601 | break; |
| 3602 | } |
| 3603 | |
| 3604 | switch (state) |
| 3605 | { |
| 3606 | case bcmolt_interface_state::BCMOLT_INTERFACE_STATE_ACTIVE_WORKING: |
| 3607 | response->set_state(openolt::PonIntfInfo_PonIntfState::PonIntfInfo_PonIntfState_ACTIVE_WORKING); |
| 3608 | break; |
| 3609 | case bcmolt_interface_state::BCMOLT_INTERFACE_STATE_ACTIVE_STANDBY: |
| 3610 | response->set_state(openolt::PonIntfInfo_PonIntfState::PonIntfInfo_PonIntfState_ACTIVE_STANDBY); |
| 3611 | break; |
| 3612 | |
| 3613 | case bcmolt_interface_state::BCMOLT_INTERFACE_STATE_DISABLED: |
| 3614 | response->set_state(openolt::PonIntfInfo_PonIntfState::PonIntfInfo_PonIntfState_DISABLED); |
| 3615 | break; |
| 3616 | |
| 3617 | case bcmolt_interface_state::BCMOLT_INTERFACE_STATE_INACTIVE: |
| 3618 | |
| 3619 | response->set_state(openolt::PonIntfInfo_PonIntfState::PonIntfInfo_PonIntfState_INACTIVE); |
| 3620 | break; |
| 3621 | default: |
| 3622 | response->set_state(openolt::PonIntfInfo_PonIntfState::PonIntfInfo_PonIntfState_UNKNOWN); |
| 3623 | } |
| 3624 | |
| 3625 | return Status::OK; |
| 3626 | } |
| 3627 | else |
| 3628 | { |
| 3629 | OPENOLT_LOG(ERROR, openolt_log_id, "Failed to fetch PON interface los status intf_id = %d, err = %s\n", |
| 3630 | intf_id, bcmos_strerror(err)); |
| 3631 | return bcm_to_grpc_err(err, "Failed to fetch PON interface los status intf_id"); |
| 3632 | } |
| 3633 | } |