blob: 50636d7c32416135739cc04046da35516f027c53 [file] [log] [blame]
Girish Gowdraa707e7c2019-11-07 11:36:13 +05301#Copyright 2018-present Open Networking Foundation
Shad Ansari01b0e652018-04-05 21:02:53 +00002#
Girish Gowdraa707e7c2019-11-07 11:36:13 +05303#Licensed under the Apache License, Version 2.0 (the "License");
4#you may not use this file except in compliance with the License.
5#You may obtain a copy of the License at
Shad Ansari01b0e652018-04-05 21:02:53 +00006#
Girish Gowdraa707e7c2019-11-07 11:36:13 +05307#http://www.apache.org/licenses/LICENSE-2.0
Shad Ansari01b0e652018-04-05 21:02:53 +00008#
Girish Gowdraa707e7c2019-11-07 11:36:13 +05309#Unless required by applicable law or agreed to in writing, software
10#distributed under the License is distributed on an "AS IS" BASIS,
11#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12#See the License for the specific language governing permissions and
13#limitations under the License.
Shad Ansari01b0e652018-04-05 21:02:53 +000014
15########################################################################
16##
17##
Luca Pretee75aaa52018-04-13 12:19:12 -070018## Config
Shad Ansari01b0e652018-04-05 21:02:53 +000019##
20##
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000021TOP_DIR=`pwd`
Shad Ansari9acc9732018-10-30 18:01:44 +000022OPENOLTDEVICE ?= generic
Craig Lutgen88a22ad2018-10-04 12:30:46 -050023
Shad Ansari01b0e652018-04-05 21:02:53 +000024#
25# Three vendor proprietary source files are required to build BAL.
26# SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK.
27# sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK.
Craig Lutgenf040dba2018-09-27 11:21:43 -050028# ACCTON_BAL_<BAL_VER>-<DEV_VER>.patch - Accton/Edgecore's patch.
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000029BAL_MAJOR_VER = 3
Jason Huangc6362792020-03-04 16:33:19 +080030BAL_MINOR_VER = 4
Girish Gowdrafc10f0d2020-11-30 13:06:35 -080031BAL_REV_A_VER = 9
32BAL_REV_B_VER = 6
Jason Huang09b73ea2020-01-08 17:52:05 +080033BAL_API_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_REV_B_VER)
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000034BAL_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_A_VER).$(BAL_REV_B_VER)
35SDK_VER = 6.5.13
Girish Gowdra315344d2020-12-17 08:51:46 -080036DEV_VER ?= 202012040101
Shad Ansari01b0e652018-04-05 21:02:53 +000037#
38# Version of Open Network Linux (ONL).
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000039ONL_KERN_VER_MAJOR = 4.14
40
41# OpenOLT Proto version.
42# This specifies the GIT tag in https://github.com/opencord/voltha-protos
43# repo that we need to refer to, to pick the right version of
44# openolt.proto and tech_profile.proto
Burak Gurdag30db4822021-03-10 21:30:01 +000045OPENOLT_PROTO_VER ?= v4.0.15
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000046
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +053047# Variables used for Inband build
48INBAND = "n"
49VLAN_ID = 4093
50
Jason Huangdc83ba72020-11-16 22:08:43 +080051# NNI ports speed setting
52PORT_100G_SPEED ?= 100000
53PORT_25G_SPEED ?= 25000
54
Shad Ansari01b0e652018-04-05 21:02:53 +000055# Build directory
56BUILD_DIR = build
Girish Gowdraddf9a162020-01-27 12:56:27 +053057
Girish Gowdra252f4972020-09-07 21:24:01 -070058# initialiaze path of protoc binary
Girish Gowdra489425a2020-02-22 13:07:42 +053059protoc-bin = $(shell which protoc)
Girish Gowdraddf9a162020-01-27 12:56:27 +053060
Girish Gowdra252f4972020-09-07 21:24:01 -070061# initialiaze path of grpc_cpp_plugin binary
Girish Gowdra489425a2020-02-22 13:07:42 +053062grpc-cpp-plugin-bin = $(shell which grpc_cpp_plugin)
Shad Ansari2cddc552018-06-26 20:34:27 +000063
64USER := $(shell echo $(USER))
Luca Pretee75aaa52018-04-13 12:19:12 -070065#
Shad Ansari01b0e652018-04-05 21:02:53 +000066########################################################################
67##
68##
Girish Gowdra252f4972020-09-07 21:24:01 -070069## Initialize various build flags
Shad Ansari01b0e652018-04-05 21:02:53 +000070##
71##
72HOST_SYSTEM = $(shell uname | cut -f 1 -d_)
73SYSTEM ?= $(HOST_SYSTEM)
Luca Pretee75aaa52018-04-13 12:19:12 -070074
Humera Kouser5ac56612019-07-25 20:23:01 -040075VERSION ?= $(shell cat ../VERSION)
76
77#set ref and commit date only if committed
78LABEL_VCS_URL ?= $(shell git remote get-url $(shell git remote))
79LABEL_VCS_REF = $(shell git rev-parse HEAD)
80LABEL_BUILD_DATE ?= $(shell date -u "+%Y-%m-%dT%H:%M:%SZ")
81LABEL_COMMIT_DATE = $(shell git show -s --format=%cd --date=iso-strict HEAD)
82
Craig Lutgenf040dba2018-09-27 11:21:43 -050083LIBGRPC_PATH=$(shell pkg-config --libs-only-L grpc | sed s/-L// | sed s/\ //g)
Girish Gowdra252f4972020-09-07 21:24:01 -070084LIBZ_PATH=$(shell pkg-config --libs-only-L zlib | sed s/-L// | sed s/\ //g)
Craig Lutgenf040dba2018-09-27 11:21:43 -050085LIBPROTOBUF_PATH=$(shell PKG_CONFIG_ALLOW_SYSTEM_LIBS=true pkg-config --libs-only-L protobuf | sed s/-L// | sed s/\ //g)
86
Girish Gowdra1935e6a2020-10-31 21:48:22 -070087PCAPPLUSPLUS_INCLUDE_PATH=-I/usr/local/include/pcapplusplus/
88PCAPPLUSPLUS_LIB_PATH=-lPcap++ -lPacket++ -lCommon++
89
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000090CXX = @CXX@-4.9
Craig Lutgenf040dba2018-09-27 11:21:43 -050091CXXFLAGS += @CXXFLAGS@
92CXXFLAGS += $(shell pkg-config --cflags-only-I grpc++)
Girish Gowdra1935e6a2020-10-31 21:48:22 -070093CXXFLAGS += $(PCAPPLUSPLUS_INCLUDE_PATH)
Humera Kouser5ac56612019-07-25 20:23:01 -040094CPPFLAGS += @CPPFLAGS@
Shad Ansari01b0e652018-04-05 21:02:53 +000095CPPFLAGS += `pkg-config --cflags protobuf grpc`
Girish Gowdra252f4972020-09-07 21:24:01 -070096
97# Enabling SCALE_AND_PERF for higher performance and scaling to 512 subscribers. Enabling the flag will
98# disable the handling in FLOW_CHECKER and also disable flow statistics
99# Setting SW_UTIL_SHELL=y will enable QAX debug shell when compiling for Broadcom chip based OLT
Humera Kouser5ac56612019-07-25 20:23:01 -0400100CPPFLAGS += -DVERSION=\"$(VERSION)\" -DBAL_VER=\"$(BAL_VER)\" -DLABEL_VCS_URL=\"$(LABEL_VCS_URL)\" \
101 -DLABEL_VCS_REF=\"$(LABEL_VCS_REF)\" -DLABEL_BUILD_DATE=\"$(LABEL_BUILD_DATE)\" \
Girish Gowdra252f4972020-09-07 21:24:01 -0700102 -DLABEL_COMMIT_DATE=\"$(LABEL_COMMIT_DATE)\" -DFLOW_CHECKER -USCALE_AND_PERF -DSW_UTIL_SHELL=n
Humera Kouser6143c9e2020-06-17 22:37:31 +0530103CPPFLAGS += -I./
Craig Lutgen7ebee132018-11-16 15:31:11 -0600104CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix
Craig Lutgenf040dba2018-09-27 11:21:43 -0500105LDFLAGS += @LDFLAGS@
106LDFLAGS += `pkg-config --libs protobuf grpc++ grpc` -ldl -lgpr
Shad Ansari9acc9732018-10-30 18:01:44 +0000107CXXFLAGSDEVICE = -I./device -I./device/$(OPENOLTDEVICE) -I./device/generic
Craig Lutgenf040dba2018-09-27 11:21:43 -0500108
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000109export CXX CXXFLAGS OPENOLT_PROTO_VER
Luca Pretee75aaa52018-04-13 12:19:12 -0700110
Shad Ansari01b0e652018-04-05 21:02:53 +0000111########################################################################
112##
113##
Luca Pretee75aaa52018-04-13 12:19:12 -0700114## ONL
Shad Ansari01b0e652018-04-05 21:02:53 +0000115##
116##
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000117ONL_REPO = onl
Shad Ansari01b0e652018-04-05 21:02:53 +0000118ONL_DIR = $(BUILD_DIR)/$(ONL_REPO)
Shad Ansari01b0e652018-04-05 21:02:53 +0000119onl:
120 if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \
121 mkdir -p $(ONL_DIR); \
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000122 git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux; \
123 cp download/Makefile.onl $(ONL_DIR)/Makefile; \
124 install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux; \
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530125 make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n; \
126 else \
127 if [ "$(INBAND)" = n -a "$$(grep "inband" $(ONL_DIR)/onl_build.mode | cut -d= -f 2)" = y ]; then \
128 make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n; \
129 fi; \
Shad Ansari01b0e652018-04-05 21:02:53 +0000130 fi;
131onl-force:
Shad Ansari9acc9732018-10-30 18:01:44 +0000132 make -C $(ONL_DIR) $(OPENOLTDEVICE)-$(ONL_KERN_VER_MAJOR)
Shad Ansari01b0e652018-04-05 21:02:53 +0000133distclean-onl:
134 sudo rm -rf $(ONL_DIR)
135
136########################################################################
137##
138##
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000139## Broadcom LIBRARY APIs
140##
141##
142BAL_API_DIR = $(BUILD_DIR)/bal-api-$(BAL_API_VER)
143
144bal-api-$(BAL_API_VER):
145 if [ ! -d "$(BAL_API_DIR)" ]; then \
146 mkdir -p $(BAL_API_DIR); \
147 git clone https://github.com/balapi/bal-api-$(BAL_API_VER).git $(BAL_API_DIR); \
148 fi;
149bal-api-clean:
150 rm $(BAL_API_DIR)
151
152########################################################################
153##
154##
Luca Pretee75aaa52018-04-13 12:19:12 -0700155## BAL
Shad Ansari01b0e652018-04-05 21:02:53 +0000156##
157##
Jason Huang09b73ea2020-01-08 17:52:05 +0800158BAL_ZIP = SW-BCM686OLT_$(subst .,_,$(BAL_VER)).tgz
Shad Ansari01b0e652018-04-05 21:02:53 +0000159SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
Craig Lutgenf040dba2018-09-27 11:21:43 -0500160ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch
Shad Ansari9acc9732018-10-30 18:01:44 +0000161BAL_DIR = $(BUILD_DIR)/$(OPENOLTDEVICE)-bal
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000162BCM_SDK = $(BAL_DIR)/switch_sdk/$(SDK_VER)
163BALLIBDIR = $(BAL_DIR)/build/host_reference/host_api
164BALLIBNAME = bal_host_api
165BAL_INC = -I$(BAL_DIR)/host_driver/bal/bal_include \
166 -I$(BAL_DIR)/host_driver/topology \
167 -I$(BAL_DIR)/host_driver/utils \
168 -I$(BAL_DIR)/host_driver/api \
Jason Huangc6362792020-03-04 16:33:19 +0800169 -I$(BAL_DIR)/host_driver/metadata \
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000170 -I$(BAL_DIR)/host_customized/os_abstraction \
171 -I$(BAL_DIR)/host_customized/os_abstraction/posix \
172 -I$(BAL_DIR)/host_customized/config \
173 -I$(BAL_DIR)/host_driver/api_conn_mgr \
174 -I$(BAL_DIR)/host_driver/conn_mgr \
175 -I$(BAL_DIR)/host_driver/api/host/topology \
176 -I$(BAL_DIR)/host_reference/cli \
177 -I$(BAL_DIR)/host_reference/api_cli \
178 -I$(BAL_API_DIR)/include \
179 -I$(BAL_API_DIR)/include/object_model
Shad Ansari01b0e652018-04-05 21:02:53 +0000180CXXFLAGS += $(BAL_INC) -I $(BAL_DIR)/lib/cmdline
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000181CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST -DENABLE_LOG -DENABLE_CLI
Jason Huangdc83ba72020-11-16 22:08:43 +0800182PORT_SPEED_FILE = $(BAL_DIR)/switch_sdk/$(SDK_VER)/rc/$(OPENOLTDEVICE)/board_files/broadcom/port_speed.soc
Shad Ansaricb004c52018-05-30 18:07:23 +0000183
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000184sdk: onl bal-api-$(BAL_API_VER)
Shad Ansari01b0e652018-04-05 21:02:53 +0000185ifeq ("$(wildcard $(BAL_DIR))","")
186 mkdir $(BAL_DIR)
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000187 tar zxvf download/$(BAL_ZIP) --strip 1 -C $(BAL_DIR)
Shad Ansari01b0e652018-04-05 21:02:53 +0000188 cp download/$(SDK_ZIP) $(BCM_SDK)
189 chmod -R 744 $(BAL_DIR)
190 cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR)
Jason Huangdc83ba72020-11-16 22:08:43 +0800191ifeq ("$(strip $(OPENOLTDEVICE))","asfvolt16")
192 echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE)
193else ifeq ("$(strip $(OPENOLTDEVICE))","asgvolt64")
194 echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE)
195 echo "setenv port_speed_for_25 $(PORT_25G_SPEED)" >> $(PORT_SPEED_FILE)
196endif
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000197 make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) ONL_DIR=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux OPEN_SOURCE=y
198 make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board
Shad Ansari01b0e652018-04-05 21:02:53 +0000199endif
Shad Ansaricb004c52018-05-30 18:07:23 +0000200
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000201bal-release: sdk
202 make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board
Shad Ansaricb004c52018-05-30 18:07:23 +0000203
204bal-clean:
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000205 make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) clean_all
Shad Ansari01b0e652018-04-05 21:02:53 +0000206
207########################################################################
208##
209##
Luca Pretee75aaa52018-04-13 12:19:12 -0700210## OpenOLT API
Shad Ansari01b0e652018-04-05 21:02:53 +0000211##
212##
Shad Ansari56c8ea42018-10-30 19:34:35 +0000213OPENOLT_PROTOS_DIR = ../protos
Shad Ansari19249582018-04-30 04:31:00 +0000214OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
Girish Gowdra252f4972020-09-07 21:24:01 -0700215CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I./device -I./device/$(OPENOLTDEVICE) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens
Shad Ansari19249582018-04-30 04:31:00 +0000216protos:
217 make -C $(OPENOLT_PROTOS_DIR) all
Shad Ansaricc01de12018-05-21 22:54:45 +0000218protos-clean:
Shad Ansari19249582018-04-30 04:31:00 +0000219 -make -C $(OPENOLT_PROTOS_DIR) clean
Shad Ansari01b0e652018-04-05 21:02:53 +0000220
221########################################################################
222##
223##
Shad Ansari627b5782018-08-13 22:49:32 +0000224## common
Shad Ansari7193ae22018-08-08 22:23:18 +0000225##
226##
Girish Gowdrafe649702019-10-30 12:49:58 +0530227
228# A hack to force a re-build of common/main.cc everytime.
229# This is needed to bake in the git VCS information in the openolt binary
230# at the time of building the openolt package.
231common/main.o: .FORCE
232.FORCE:
233 $(CXX) $(CXXFLAGS) $(CPPFLAGS) -I./common -c common/main.cc -o common/main.o
234
Shad Ansari627b5782018-08-13 22:49:32 +0000235common/%.o: common/%.cc
Humera Kouser5ac56612019-07-25 20:23:01 -0400236 $(CXX) $(CXXFLAGS) $(CPPFLAGS) -I./common -c $< -o $@
Shad Ansari7193ae22018-08-08 22:23:18 +0000237
238########################################################################
239##
240##
Craig Lutgen88a22ad2018-10-04 12:30:46 -0500241## device
242##
243##
Shad Ansari9acc9732018-10-30 18:01:44 +0000244device/$(OPENOLTDEVICE)/%.o: device/$(OPENOLTDEVICE)/%.cc
Craig Lutgen88a22ad2018-10-04 12:30:46 -0500245 $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@
246
247device/generic/%.o: device/generic/%.cc
248 $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@
249
250########################################################################
251##
252##
Shad Ansari627b5782018-08-13 22:49:32 +0000253## openolt
254##
255##
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400256OLT_SW_UPGRADE_DIR = ../olt-sw-upgrade
Shad Ansari9acc9732018-10-30 18:01:44 +0000257SRCS = $(wildcard src/*.cc) $(wildcard common/*.cc) $(wildcard device/$(OPENOLTDEVICE)/*.cc)
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400258ANSIBLE_DIR = /etc/ansible
Shad Ansari01b0e652018-04-05 21:02:53 +0000259OBJS = $(SRCS:.cc=.o)
260DEPS = $(SRCS:.cc=.d)
261.DEFAULT_GOAL := all
Shad Ansari2ae27672019-05-09 00:26:34 +0000262all: $(BUILD_DIR)/openolt
Shad Ansaricb004c52018-05-30 18:07:23 +0000263$(BUILD_DIR)/openolt: sdk protos $(OBJS)
Girish Gowdra1935e6a2020-10-31 21:48:22 -0700264 $(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $@ -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc) $(PCAPPLUSPLUS_LIB_PATH)
Jason Huang09b73ea2020-01-08 17:52:05 +0800265 ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/$(OPENOLTDEVICE)/release/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz $(BUILD_DIR)/.
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000266 ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_reference/host_api/strip/libbal_host_api.so $(BUILD_DIR)/.
267 ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_driver/dev_mgmt_daemon/dev_mgmt_daemon $(BUILD_DIR)/.
Girish Gowdra252f4972020-09-07 21:24:01 -0700268 ln -sf $(LIBGRPC_PATH)/libz.so.1 $(BUILD_DIR)/libz.so.1
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000269 ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 $(BUILD_DIR)/libstdc++.so.6
270 strip $(BUILD_DIR)/openolt
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530271 echo "inband=n" > $(ONL_DIR)/onl_build.mode
272 if [ $(INBAND) = y ]; then \
273 echo "Building ONL+BAL+OpenoltAgent allinone image"; \
274 make deb; \
275 make inband-onl; \
276 fi;
277
Shad Ansari627b5782018-08-13 22:49:32 +0000278src/%.o: src/%.cc
Humera Kouser5ac56612019-07-25 20:23:01 -0400279 $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) $(CPPFLAGS) -I./common -c $< -o $@
Shad Ansari01b0e652018-04-05 21:02:53 +0000280
Shad Ansari6cd46a62018-05-13 23:20:51 +0000281deb:
Jason Huang09b73ea2020-01-08 17:52:05 +0800282 cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz device/$(OPENOLTDEVICE)/mkdebian/debian
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000283 cp $(BUILD_DIR)/openolt device/$(OPENOLTDEVICE)/mkdebian/debian
Girish Gowdra252f4972020-09-07 21:24:01 -0700284 cp $(BUILD_DIR)/libz.so.1 device/$(OPENOLTDEVICE)/mkdebian/debian
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000285 cp $(BUILD_DIR)/libstdc++.so.6 device/$(OPENOLTDEVICE)/mkdebian/debian
286 cp $(BUILD_DIR)/libbal_host_api.so device/$(OPENOLTDEVICE)/mkdebian/debian
287 cp -a scripts/init.d device/$(OPENOLTDEVICE)/mkdebian/debian
Girish Gowdra6e745522020-07-15 15:52:13 -0700288 cp -a scripts/watchdog device/$(OPENOLTDEVICE)/mkdebian/debian
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000289 cd device/$(OPENOLTDEVICE)/mkdebian && ./build_$(OPENOLTDEVICE)_deb.sh
Girish Gowdrabc6e0852020-03-26 11:36:12 -0700290 mv device/$(OPENOLTDEVICE)/*.deb $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb
Shad Ansaricb004c52018-05-30 18:07:23 +0000291 make deb-cleanup
Shad Ansari6cd46a62018-05-13 23:20:51 +0000292
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530293inband-onl:
294 # Clean previous ONL build and build freshly
295 sudo rm -rf $(ONL_DIR)
296 mkdir -p $(ONL_DIR)
297 git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux
298 cp download/Makefile.onl $(ONL_DIR)/Makefile
299 install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux
300
301 # Check ONL commit equals to Inband patch commit
302 ONL_COMMIT_ID=$(awk \'/COMMIT_ID = /{print $0}\' $(ONL_DIR)/Makefile | awk -F \"=\" \'{print $2}\')
303 INBAND_PATCH_COMMIT_ID=$(echo cp $(TOP_DIR)/inband/patch/*.patch | cut -d- -f 2 | cut -d. -f 1)
304 if [ "$(ONL_COMMIT_ID)" = "$(INBAND_PATCH_COMMIT_ID)" ]; then \
305 echo "ONL commit and inband patch commit matched."; \
306 cp $(TOP_DIR)/inband/patch/*.patch $(ONL_DIR)/OpenNetworkLinux; \
307 else \
308 echo "ONL commit and inband patch commit does not match. Exiting."; \
309 exit 1; \
310 fi;
311
Girish Gowdra6e745522020-07-15 15:52:13 -0700312 # Update inband.config file with VLAN ID argument passed
313 sed -i 's/asfvolt16_vlan_id_eth2=.*/asfvolt16_vlan_id_eth2=$(VLAN_ID)/' $(TOP_DIR)/inband/config/inband.config
314 sed -i 's/asgvolt64_vlan_id_eth1=.*/asgvolt64_vlan_id_eth1=$(VLAN_ID)/' $(TOP_DIR)/inband/config/inband.config
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530315
316 # Copy Inband config files and olt startup scripts to ONL source code and build
317 cd $(TOP_DIR) && mkdir -p $(ONL_DIR)/OpenNetworkLinux/bal_packages
318 cp $(TOP_DIR)/inband/scripts/* $(ONL_DIR)/OpenNetworkLinux/bal_packages
Girish Gowdra6e745522020-07-15 15:52:13 -0700319 cp $(TOP_DIR)/inband/config/inband.config $(ONL_DIR)/OpenNetworkLinux/bal_packages
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530320 cp $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb $(ONL_DIR)/OpenNetworkLinux/bal_packages/openolt_$(OPENOLTDEVICE).deb
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400321 cp $(OLT_SW_UPGRADE_DIR)/change_labels.sh $(ONL_DIR)/OpenNetworkLinux/bal_packages
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530322
323 # Rebuild ONL packed with already built BAL+Openolt debian package
324 make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=y
325 echo "inband=y" > $(ONL_DIR)/onl_build.mode
326 make inband-onl-cleanup
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400327# requires 'sudo' privileges
328
329ansible:
330 (ONL_INSTALLED_INSTALLER="$(shell find "$$(cd ./build/onl/OpenNetworkLinux/RELEASE/jessie/amd64; pwd)" -name "ONL-onl-*_AMD64_INSTALLED_INSTALLER")"; \
331 rm -rf $(ANSIBLE_DIR)/roles/upgrade/files; \
332 mkdir -p $(ANSIBLE_DIR)/roles/upgrade/files; \
333 cp ../olt-sw-upgrade/install_onl.sh $(ANSIBLE_DIR)/roles/upgrade/files; \
334 chmod +x $(ANSIBLE_DIR)/roles/upgrade/files/*.sh; \
335 ln -s $$ONL_INSTALLED_INSTALLER $(ANSIBLE_DIR)/roles/upgrade/files/ONL_INSTALLED_INSTALLER)
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530336
Shad Ansari01b0e652018-04-05 21:02:53 +0000337src/%.o: %.cpp
338 $(CXX) -MMD -c $< -o $@
339
Shad Ansaricb004c52018-05-30 18:07:23 +0000340deb-cleanup:
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000341 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).debhelper.log
342 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).postinst.debhelper
343 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).postrm.debhelper
344 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).substvars
345 @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE)/
346 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/debhelper-build-stamp
Girish Gowdra252f4972020-09-07 21:24:01 -0700347 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libz.so.1
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000348 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libstdc++.so.6
349 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libbal_host_api.so
350 @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/init.d/
351 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/openolt
Jason Huang09b73ea2020-01-08 17:52:05 +0800352 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000353 @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/tmp/
354 @rm -f device/$(OPENOLTDEVICE)/$(OPENOLTDEVICE)_$(BAL_VER)+edgecore-V$(DEV_VER)_amd64.changes
Shad Ansaricc01de12018-05-21 22:54:45 +0000355
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530356inband-onl-cleanup:
357 @rm -f $(ONL_DIR)/OpenNetworkLinux/*.patch
358 @rm -rf $(ONL_DIR)/OpenNetworkLinux/bal_packages
359
Shad Ansaricb004c52018-05-30 18:07:23 +0000360clean: protos-clean deb-cleanup
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000361 @rm -f $(OBJS) $(DEPS)
362 @rm -rf $(OPENOLT_PROTOS_DIR)/googleapis
Girish Gowdra252f4972020-09-07 21:24:01 -0700363 @rm -f $(BUILD_DIR)/libz.so.1
Girish Gowdraab7ea552020-01-07 13:25:15 +0530364 @rm -f $(BUILD_DIR)/libbal_host_api.so
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000365 @rm -f $(BUILD_DIR)/openolt
Girish Gowdraab7ea552020-01-07 13:25:15 +0530366 @rm -f $(BUILD_DIR)/dev_mgmt_daemon
Jason Huang09b73ea2020-01-08 17:52:05 +0800367 @rm -f $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
Girish Gowdrabc6e0852020-03-26 11:36:12 -0700368 @rm -f $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb
Shad Ansari19249582018-04-30 04:31:00 +0000369
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000370clean-src: protos-clean
371 @rm -f $(OBJS) $(DEPS)
372
373distclean: clean-src clean
374 @rm -rf $(BUILD_DIR)
Shad Ansaricb004c52018-05-30 18:07:23 +0000375
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400376.PHONY: onl sdk bal protos inband-onl ansible .FORCE