blob: d0986f0cee8edec9e55da37a37f1e3064532228f [file] [log] [blame]
Joey Armstrong0ebb7822023-08-17 14:21:41 -04001# -*- makefile -*-
2#Copyright 2018-2023 Open Networking Foundation (ONF) and the ONF Contributors
Shad Ansari01b0e652018-04-05 21:02:53 +00003#
Girish Gowdraa707e7c2019-11-07 11:36:13 +05304#Licensed under the Apache License, Version 2.0 (the "License");
5#you may not use this file except in compliance with the License.
6#You may obtain a copy of the License at
Shad Ansari01b0e652018-04-05 21:02:53 +00007#
Girish Gowdraa707e7c2019-11-07 11:36:13 +05308#http://www.apache.org/licenses/LICENSE-2.0
Shad Ansari01b0e652018-04-05 21:02:53 +00009#
Girish Gowdraa707e7c2019-11-07 11:36:13 +053010#Unless required by applicable law or agreed to in writing, software
11#distributed under the License is distributed on an "AS IS" BASIS,
12#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13#See the License for the specific language governing permissions and
14#limitations under the License.
Shad Ansari01b0e652018-04-05 21:02:53 +000015
16########################################################################
17##
18##
Luca Pretee75aaa52018-04-13 12:19:12 -070019## Config
Shad Ansari01b0e652018-04-05 21:02:53 +000020##
21##
Girish Gowdra5287fde2021-07-31 00:41:45 +000022TOP_DIR=$(shell pwd)
Shad Ansari9acc9732018-10-30 18:01:44 +000023OPENOLTDEVICE ?= generic
Craig Lutgen88a22ad2018-10-04 12:30:46 -050024
Shad Ansari01b0e652018-04-05 21:02:53 +000025#
26# Three vendor proprietary source files are required to build BAL.
27# SW-BCM68620_<VER>.zip - Broadcom BAL source and Maple SDK.
28# sdk-all-<SDK_VER>.tar.gz - Broadcom Qumran SDK.
Craig Lutgenf040dba2018-09-27 11:21:43 -050029# ACCTON_BAL_<BAL_VER>-<DEV_VER>.patch - Accton/Edgecore's patch.
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000030BAL_MAJOR_VER = 3
Girish Gowdra5287fde2021-07-31 00:41:45 +000031BAL_MINOR_VER = 10
32BAL_REV_HOST_VER = 2
33BAL_REV_EMBEDDED_VER = 2
34BAL_API_SO_VER = $(BAL_MAJOR_VER).$(BAL_MINOR_VER).$(BAL_REV_HOST_VER)
35BAL_VER = $(BAL_API_SO_VER).$(BAL_REV_EMBEDDED_VER)
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +053036ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +053037DEV_VER = 20211129
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +053038# Version of Open Network Linux (ONL).
39ONL_KERN_VER_MAJOR = 4.19
Arthur Syu094df162022-04-21 17:50:06 +080040else ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
41BAL_VER = 3.10.0.0
42DEV_VER = 20220425
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +053043else
Girish Gowdra5287fde2021-07-31 00:41:45 +000044DEV_VER = 202111040101
45API_VER = 202111090101
46# Version of Open Network Linux (ONL).
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +053047ONL_KERN_VER_MAJOR = 4.14
48endif
Girish Gowdra5287fde2021-07-31 00:41:45 +000049SDK_VER = 6.5.21
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000050
51# OpenOLT Proto version.
52# This specifies the GIT tag in https://github.com/opencord/voltha-protos
53# repo that we need to refer to, to pick the right version of
54# openolt.proto and tech_profile.proto
Fridolin Siegmund94ab2ff2023-09-04 12:02:47 +020055OPENOLT_PROTO_VER ?= v5.4.10
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +000056
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +053057# Variables used for Inband build
58INBAND = "n"
59VLAN_ID = 4093
60
Jason Huangdc83ba72020-11-16 22:08:43 +080061# NNI ports speed setting
62PORT_100G_SPEED ?= 100000
63PORT_25G_SPEED ?= 25000
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +053064ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w"))
65PORT_QSFP_SPEED ?= 40g
66PORT_SFP_SPEED ?= 10g
67else ifeq ("$(strip $(OPENOLTDEVICE))","rlt-1600x-w")
68PORT_QSFP_SPEED ?= 100g
69PORT_SFP_SPEED ?= 25g
70endif
Jason Huangdc83ba72020-11-16 22:08:43 +080071
Shad Ansari01b0e652018-04-05 21:02:53 +000072# Build directory
73BUILD_DIR = build
Girish Gowdraddf9a162020-01-27 12:56:27 +053074
Orhan Kupusogluec57af02021-05-12 12:38:17 +000075# Rx optical power test app
76RXTX_POWER_EXE = read_rxtx_power
77
Girish Gowdra252f4972020-09-07 21:24:01 -070078# initialiaze path of protoc binary
Girish Gowdra489425a2020-02-22 13:07:42 +053079protoc-bin = $(shell which protoc)
Girish Gowdraddf9a162020-01-27 12:56:27 +053080
Girish Gowdra252f4972020-09-07 21:24:01 -070081# initialiaze path of grpc_cpp_plugin binary
Girish Gowdra489425a2020-02-22 13:07:42 +053082grpc-cpp-plugin-bin = $(shell which grpc_cpp_plugin)
Shad Ansari2cddc552018-06-26 20:34:27 +000083
84USER := $(shell echo $(USER))
Luca Pretee75aaa52018-04-13 12:19:12 -070085#
Shad Ansari01b0e652018-04-05 21:02:53 +000086########################################################################
87##
88##
Girish Gowdra252f4972020-09-07 21:24:01 -070089## Initialize various build flags
Shad Ansari01b0e652018-04-05 21:02:53 +000090##
91##
92HOST_SYSTEM = $(shell uname | cut -f 1 -d_)
93SYSTEM ?= $(HOST_SYSTEM)
Luca Pretee75aaa52018-04-13 12:19:12 -070094
Humera Kouser5ac56612019-07-25 20:23:01 -040095VERSION ?= $(shell cat ../VERSION)
96
97#set ref and commit date only if committed
98LABEL_VCS_URL ?= $(shell git remote get-url $(shell git remote))
99LABEL_VCS_REF = $(shell git rev-parse HEAD)
100LABEL_BUILD_DATE ?= $(shell date -u "+%Y-%m-%dT%H:%M:%SZ")
101LABEL_COMMIT_DATE = $(shell git show -s --format=%cd --date=iso-strict HEAD)
102
Craig Lutgenf040dba2018-09-27 11:21:43 -0500103LIBGRPC_PATH=$(shell pkg-config --libs-only-L grpc | sed s/-L// | sed s/\ //g)
Girish Gowdra252f4972020-09-07 21:24:01 -0700104LIBZ_PATH=$(shell pkg-config --libs-only-L zlib | sed s/-L// | sed s/\ //g)
Craig Lutgenf040dba2018-09-27 11:21:43 -0500105LIBPROTOBUF_PATH=$(shell PKG_CONFIG_ALLOW_SYSTEM_LIBS=true pkg-config --libs-only-L protobuf | sed s/-L// | sed s/\ //g)
106
Girish Gowdra1935e6a2020-10-31 21:48:22 -0700107PCAPPLUSPLUS_INCLUDE_PATH=-I/usr/local/include/pcapplusplus/
108PCAPPLUSPLUS_LIB_PATH=-lPcap++ -lPacket++ -lCommon++
109
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +0530110ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
111CXX = @CXX@-6
112else
113CXX = @CXX@-4.9
114endif
Craig Lutgenf040dba2018-09-27 11:21:43 -0500115CXXFLAGS += @CXXFLAGS@
116CXXFLAGS += $(shell pkg-config --cflags-only-I grpc++)
Girish Gowdra1935e6a2020-10-31 21:48:22 -0700117CXXFLAGS += $(PCAPPLUSPLUS_INCLUDE_PATH)
Humera Kouser5ac56612019-07-25 20:23:01 -0400118CPPFLAGS += @CPPFLAGS@
Shad Ansari01b0e652018-04-05 21:02:53 +0000119CPPFLAGS += `pkg-config --cflags protobuf grpc`
Girish Gowdra252f4972020-09-07 21:24:01 -0700120
121# Enabling SCALE_AND_PERF for higher performance and scaling to 512 subscribers. Enabling the flag will
122# disable the handling in FLOW_CHECKER and also disable flow statistics
Humera Kouser5ac56612019-07-25 20:23:01 -0400123CPPFLAGS += -DVERSION=\"$(VERSION)\" -DBAL_VER=\"$(BAL_VER)\" -DLABEL_VCS_URL=\"$(LABEL_VCS_URL)\" \
124 -DLABEL_VCS_REF=\"$(LABEL_VCS_REF)\" -DLABEL_BUILD_DATE=\"$(LABEL_BUILD_DATE)\" \
Girish Gowdra5287fde2021-07-31 00:41:45 +0000125 -DLABEL_COMMIT_DATE=\"$(LABEL_COMMIT_DATE)\" -DFLOW_CHECKER -USCALE_AND_PERF
Humera Kouser6143c9e2020-06-17 22:37:31 +0530126CPPFLAGS += -I./
Craig Lutgen7ebee132018-11-16 15:31:11 -0600127CXXFLAGS += -std=c++11 -fpermissive -Wno-literal-suffix
Craig Lutgenf040dba2018-09-27 11:21:43 -0500128LDFLAGS += @LDFLAGS@
129LDFLAGS += `pkg-config --libs protobuf grpc++ grpc` -ldl -lgpr
Shad Ansari9acc9732018-10-30 18:01:44 +0000130CXXFLAGSDEVICE = -I./device -I./device/$(OPENOLTDEVICE) -I./device/generic
Craig Lutgenf040dba2018-09-27 11:21:43 -0500131
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000132export CXX CXXFLAGS OPENOLT_PROTO_VER
Luca Pretee75aaa52018-04-13 12:19:12 -0700133
Shad Ansari01b0e652018-04-05 21:02:53 +0000134########################################################################
135##
136##
Luca Pretee75aaa52018-04-13 12:19:12 -0700137## ONL
Shad Ansari01b0e652018-04-05 21:02:53 +0000138##
139##
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000140ONL_REPO = onl
Shad Ansari01b0e652018-04-05 21:02:53 +0000141ONL_DIR = $(BUILD_DIR)/$(ONL_REPO)
Arthur Syu094df162022-04-21 17:50:06 +0800142ONL_COMMIT_ID = 11ed2140
Shad Ansari01b0e652018-04-05 21:02:53 +0000143onl:
144 if [ ! -d "$(ONL_DIR)/OpenNetworkLinux" ]; then \
145 mkdir -p $(ONL_DIR); \
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000146 git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux; \
Arthur Syu094df162022-04-21 17:50:06 +0800147 if [ "$(OPENOLTDEVICE)" = "sda3016ss" ]; then \
148 tar zxvf download/onl_zyxel_sda3016ss.tar.gz -C $(ONL_DIR)/OpenNetworkLinux; \
149 cp download/onl_workaround.patch $(ONL_DIR)/OpenNetworkLinux; \
150 cd $(ONL_DIR)/OpenNetworkLinux; \
151 git checkout $(ONL_COMMIT_ID); \
152 git apply --whitespace=nowarn onl_zyxel_sda3016ss.patch; \
153 git apply --whitespace=nowarn onl_workaround.patch; \
154 export VERSION=8; \
155 make docker; \
156 cd packages/base/amd64/kernels/kernel-4.19-lts-x86-64-all/builds/jessie; tar zcf linux-4.19.81.tgz linux-4.19.81; \
157 mv $(BUILD_DIR)/$(ONL_REPO)/OpenNetworkLinux/packages/base/amd64/kernels/kernel-4.19-lts-x86-64-all/builds/jessie/linux-4.19.81.tgz download/; \
158 else \
159 cp download/Makefile.onl $(ONL_DIR)/Makefile; \
160 install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux; \
161 cp download/disable-certificate-validation*.patch $(ONL_DIR)/OpenNetworkLinux; \
162 if [ "$(OPENOLTDEVICE)" = "rlt-3200g-w" ] || [ "$(OPENOLTDEVICE)" = "rlt-1600g-w" ] || [ "$(OPENOLTDEVICE)" = "rlt-1600x-w" ]; \
163 then \
164 cp $(TOP_DIR)/device/$(OPENOLTDEVICE)/update_kernel_options.sh $(ONL_DIR)/OpenNetworkLinux/.; \
165 chmod 0755 $(ONL_DIR)/OpenNetworkLinux/update_kernel_options.sh; \
166 fi; \
167 make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n BOARD=$(OPENOLTDEVICE); \
Thiyagarajan Subramani3e8bfd92021-04-26 15:07:14 +0530168 fi; \
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530169 else \
170 if [ "$(INBAND)" = n -a "$$(grep "inband" $(ONL_DIR)/onl_build.mode | cut -d= -f 2)" = y ]; then \
171 make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=n; \
172 fi; \
Shad Ansari01b0e652018-04-05 21:02:53 +0000173 fi;
174onl-force:
Shad Ansari9acc9732018-10-30 18:01:44 +0000175 make -C $(ONL_DIR) $(OPENOLTDEVICE)-$(ONL_KERN_VER_MAJOR)
Shad Ansari01b0e652018-04-05 21:02:53 +0000176distclean-onl:
177 sudo rm -rf $(ONL_DIR)
178
Girish Gowdra5287fde2021-07-31 00:41:45 +0000179
Shad Ansari01b0e652018-04-05 21:02:53 +0000180########################################################################
181##
182##
Girish Gowdra5287fde2021-07-31 00:41:45 +0000183## Broadcom LIBRARY OSS API
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000184##
185##
Girish Gowdra5287fde2021-07-31 00:41:45 +0000186BAL_API_DIR = $(TOP_DIR)/$(BUILD_DIR)/bal-oss-api-$(BAL_VER)
187BAL_API_PATCH = ACCTON_BAL_API_$(BAL_VER)-V$(API_VER).patch
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000188
Girish Gowdra5287fde2021-07-31 00:41:45 +0000189$(BUILD_DIR)/libbal_host_api-oss.so:
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000190 if [ ! -d "$(BAL_API_DIR)" ]; then \
191 mkdir -p $(BAL_API_DIR); \
Girish Gowdra5287fde2021-07-31 00:41:45 +0000192 cd $(BAL_API_DIR); \
193 git clone https://github.com/balapi/bal-sdk.git -b $(BAL_VER); \
194 mv bal-sdk bal-sdk-$(BAL_VER); \
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530195 if [ "$(OPENOLTDEVICE)" = "rlt-3200g-w" ] || [ "$(OPENOLTDEVICE)" = "rlt-1600g-w" ] || [ "$(OPENOLTDEVICE)" = "rlt-1600x-w" ]; \
196 then \
197 cd $(BAL_API_DIR)/bal-sdk-$(BAL_VER); \
198 make; \
199 cp build/fs/libbal_host_api-oss.$(BAL_API_SO_VER).so ../../../$(BUILD_DIR)/libbal_host_api-oss.so; \
200 cd .. && ln -s bal-sdk-$(BAL_VER)/build/fs/include include; \
201 cd; \
202 else \
203 cat $(TOP_DIR)/download/$(BAL_API_PATCH) | patch -p1 -d $(BAL_API_DIR)/bal-sdk-$(BAL_VER); \
204 cd $(BAL_API_DIR)/bal-sdk-$(BAL_VER); \
205 make BOARD=$(OPENOLTDEVICE); \
206 cp build/fs/libbal_host_api-oss.$(BAL_API_SO_VER).so ../../../$(BUILD_DIR)/libbal_host_api-oss.so; \
207 cp config/$(OPENOLTDEVICE)/bcm_config.h build/fs/include; \
208 cd .. && ln -s bal-sdk-$(BAL_VER)/build/fs/include include; \
209 cd; \
210 fi; \
Girish Gowdrafc6c0bf2022-01-28 18:31:30 -0800211 else \
212 cd $(BAL_API_DIR)/bal-sdk-$(BAL_VER); \
213 cp build/fs/libbal_host_api-oss.$(BAL_API_SO_VER).so ../../../$(BUILD_DIR)/libbal_host_api-oss.so; \
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530214 if [ "$(OPENOLTDEVICE)" != "rlt-3200g-w" ] && [ "$(OPENOLTDEVICE)" != "rlt-1600g-w" ] && [ "$(OPENOLTDEVICE)" != "rlt-1600x-w" ]; \
215 then \
216 cp config/$(OPENOLTDEVICE)/bcm_config.h build/fs/include; \
217 fi; \
Girish Gowdrafc6c0bf2022-01-28 18:31:30 -0800218 cd .. && ln -s bal-sdk-$(BAL_VER)/build/fs/include include; \
219 cd; \
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000220 fi;
Girish Gowdra5287fde2021-07-31 00:41:45 +0000221
222
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000223bal-api-clean:
Girish Gowdra5287fde2021-07-31 00:41:45 +0000224 if [ -d "$(BAL_API_DIR)" ]; then \
225 rm -rf $(BAL_API_DIR); \
226 fi;
227 rm -rf $(BUILD_DIR)/libbal_host_api-oss.so
228
229########################################################################
230#
231# Choose api type: open api (api-oss) or proprietary api (api-nda-req)
232BAL_API_TYPE = api-oss
Arthur Syu094df162022-04-21 17:50:06 +0800233#BAL_API_TYPE = api-nda_req
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000234
235########################################################################
236##
237##
Girish Gowdra5287fde2021-07-31 00:41:45 +0000238## BAL OSS API
Shad Ansari01b0e652018-04-05 21:02:53 +0000239##
240##
Shad Ansari9acc9732018-10-30 18:01:44 +0000241BAL_DIR = $(BUILD_DIR)/$(OPENOLTDEVICE)-bal
Girish Gowdra5287fde2021-07-31 00:41:45 +0000242BALLIBDIR = $(BUILD_DIR)
243BALLIBNAME = bal_host_$(BAL_API_TYPE)
244BAL_INC = -I$(BAL_API_DIR)/include
Arthur Syu094df162022-04-21 17:50:06 +0800245ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
246BALLIBDIR = $(BAL_DIR)/build/host_reference/host_api
247BAL_INC += -I$(BAL_DIR)/host_driver/bal/bal_include \
248 -I$(BAL_DIR)/host_driver/topology \
249 -I$(BAL_DIR)/host_driver/utils \
250 -I$(BAL_DIR)/host_driver/api \
251 -I$(BAL_DIR)/host_driver/metadata \
252 -I$(BAL_DIR)/host_customized/os_abstraction \
253 -I$(BAL_DIR)/host_customized/os_abstraction/posix \
254 -I$(BAL_DIR)/host_customized/config \
255 -I$(BAL_DIR)/host_driver/api_conn_mgr \
256 -I$(BAL_DIR)/host_driver/conn_mgr \
257 -I$(BAL_DIR)/host_driver/api/host/topology \
258 -I$(BAL_DIR)/host_driver/system_types \
259 -I$(BAL_DIR)/host_driver/transport \
260 -I$(BAL_DIR)/host_reference/cli \
261 -I$(BAL_DIR)/host_reference/api_cli \
262 -I$(BAL_DIR)/host_reference/dev_log \
263 -I$(BAL_DIR)/host_reference/host_api \
264 -I$(BAL_DIR)/lib/cmdline
265endif
Girish Gowdra5287fde2021-07-31 00:41:45 +0000266CXXFLAGS += $(BAL_INC)
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000267CXXFLAGS += -DBCMOS_MSG_QUEUE_DOMAIN_SOCKET -DBCMOS_MSG_QUEUE_UDP_SOCKET -DBCMOS_MEM_CHECK -DBCMOS_SYS_UNITTEST -DENABLE_LOG -DENABLE_CLI
Jason Huangdc83ba72020-11-16 22:08:43 +0800268PORT_SPEED_FILE = $(BAL_DIR)/switch_sdk/$(SDK_VER)/rc/$(OPENOLTDEVICE)/board_files/broadcom/port_speed.soc
Shad Ansaricb004c52018-05-30 18:07:23 +0000269
Girish Gowdra5287fde2021-07-31 00:41:45 +0000270########################################################################
271##
272## BAL proprietary elements - NDA is required with Broadcom
273##
274## For Accton patch - contact Accton corporation
275##
276## Not required when building the OpenOLT agent from github source
277##
278## !!!NOTE: libbal_host_api-nda_req.so is proprietary and must not be
279## published in any open debian package or otherwise made
280## available to third parties that do not have an SLA and
281## NDA with Broadcom
282##
283BAL_SDK_ZIP = SW-BCM686OLT_$(subst .,_,$(BAL_VER)).tgz
284CSG_SDK_ZIP = sdk-all-$(SDK_VER).tar.gz
285ACCTON_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER).patch
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530286RADISYS_PATCH = RADISYS_BAL_$(BAL_VER)_V$(DEV_VER).patch
Girish Gowdra5287fde2021-07-31 00:41:45 +0000287BROADCOM_IP_PATCH = ACCTON_BAL_$(BAL_VER)-V$(DEV_VER)-BROADCOM-IP.patch
288BCM_SWITCH_SDK = $(BAL_DIR)/switch_sdk/$(SDK_VER)
Arthur Syu094df162022-04-21 17:50:06 +0800289ZYXEL_PATCH = ZYXEL_BAL_$(BAL_VER)_V$(DEV_VER).patch
Girish Gowdra5287fde2021-07-31 00:41:45 +0000290
291sdk: onl
Shad Ansari01b0e652018-04-05 21:02:53 +0000292ifeq ("$(wildcard $(BAL_DIR))","")
293 mkdir $(BAL_DIR)
Girish Gowdra5287fde2021-07-31 00:41:45 +0000294 tar zxvf download/$(BAL_SDK_ZIP) --strip 1 -C $(BAL_DIR)
295 cp download/$(CSG_SDK_ZIP) $(BCM_SWITCH_SDK)
Shad Ansari01b0e652018-04-05 21:02:53 +0000296 chmod -R 744 $(BAL_DIR)
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530297ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
298 cat download/$(RADISYS_PATCH) | patch -p1 -d $(BAL_DIR)
Arthur Syu094df162022-04-21 17:50:06 +0800299else ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
300 tar zxf download/sda3016ss_rootfs.tar.gz -C $(BAL_DIR)
301 cat download/$(ZYXEL_PATCH) | patch -p1 -d $(BAL_DIR)
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530302else
Girish Gowdra5287fde2021-07-31 00:41:45 +0000303 cat download/$(ACCTON_PATCH) | patch -p1 -d $(BAL_DIR)
304 cat download/$(BROADCOM_IP_PATCH) | patch -p1 -d $(BAL_DIR)
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530305endif
Girish Gowdra5287fde2021-07-31 00:41:45 +0000306
Jason Huangdc83ba72020-11-16 22:08:43 +0800307ifeq ("$(strip $(OPENOLTDEVICE))","asfvolt16")
308 echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE)
309else ifeq ("$(strip $(OPENOLTDEVICE))","asgvolt64")
310 echo "setenv port_speed_for_100 $(PORT_100G_SPEED)" > $(PORT_SPEED_FILE)
311 echo "setenv port_speed_for_25 $(PORT_25G_SPEED)" >> $(PORT_SPEED_FILE)
312endif
Girish Gowdra5287fde2021-07-31 00:41:45 +0000313
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +0530314ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
Thiyagarajan Subramani3e8bfd92021-04-26 15:07:14 +0530315 chmod 0755 $(BAL_DIR)/onu_mgmt/libomcistack/me_codegen/omci_stack_codegen
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530316 chmod 0755 $(BCM_SWITCH_SDK)/sdk_patches_apply.sh
317 make -C $(BAL_DIR) BOARD=radisys ONL=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux ONL_DEBIAN_SUITE=$(shell lsb_release -c -s)
318 make -C $(BAL_DIR) BOARD=radisys release_board
Arthur Syu094df162022-04-21 17:50:06 +0800319else ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
320 cp download/Dockerfile $(BAL_DIR)
321 tar zxf download/linux-4.19.81.tgz -C $(BAL_DIR)
322 docker build $(BAL_DIR) -t tt_ub18
323 docker run -v $(TOP_DIR)/$(BAL_DIR):/mnt -w /mnt tt_ub18 bash -c 'make'
324 cp download/sda3016_nni_init.conf $(BAL_DIR)/sda3016ss_rootfs/opt/bcm68620/
325 docker run -v $(TOP_DIR)/$(BAL_DIR):/mnt -w /mnt tt_ub18 bash -c 'make release_board'
Thiyagarajan Subramani3e8bfd92021-04-26 15:07:14 +0530326else
Girish Gowdra5287fde2021-07-31 00:41:45 +0000327 make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) ONL_DIR=$(TOP_DIR)/$(ONL_DIR)/OpenNetworkLinux
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000328 make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) release_board
Shad Ansari01b0e652018-04-05 21:02:53 +0000329endif
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +0530330endif
Shad Ansaricb004c52018-05-30 18:07:23 +0000331
Shad Ansaricb004c52018-05-30 18:07:23 +0000332bal-clean:
Arthur Syu094df162022-04-21 17:50:06 +0800333ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
334 docker run -v $(TOP_DIR)/$(BAL_DIR):/mnt -w /mnt tt_ub18 bash -c 'make clean_all'
335else
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000336 make -C $(BAL_DIR) BOARD=$(OPENOLTDEVICE) clean_all
Arthur Syu094df162022-04-21 17:50:06 +0800337endif
Shad Ansari01b0e652018-04-05 21:02:53 +0000338########################################################################
339##
340##
Luca Pretee75aaa52018-04-13 12:19:12 -0700341## OpenOLT API
Shad Ansari01b0e652018-04-05 21:02:53 +0000342##
343##
Shad Ansari56c8ea42018-10-30 19:34:35 +0000344OPENOLT_PROTOS_DIR = ../protos
Shad Ansari19249582018-04-30 04:31:00 +0000345OPENOLT_API_LIB = $(OPENOLT_PROTOS_DIR)/libopenoltapi.a
Girish Gowdra252f4972020-09-07 21:24:01 -0700346CXXFLAGS += -I$(OPENOLT_PROTOS_DIR) -I./device -I./device/$(OPENOLTDEVICE) -I$(OPENOLT_PROTOS_DIR)/googleapis/gens
Shad Ansari19249582018-04-30 04:31:00 +0000347protos:
Girish Gowdrafc6c0bf2022-01-28 18:31:30 -0800348 if [ ! -f "$(OPENOLT_API_LIB)" ]; then \
349 make -C $(OPENOLT_PROTOS_DIR) all; \
350 fi;
Shad Ansaricc01de12018-05-21 22:54:45 +0000351protos-clean:
Shad Ansari19249582018-04-30 04:31:00 +0000352 -make -C $(OPENOLT_PROTOS_DIR) clean
Shad Ansari01b0e652018-04-05 21:02:53 +0000353
354########################################################################
355##
356##
Shad Ansari627b5782018-08-13 22:49:32 +0000357## common
Shad Ansari7193ae22018-08-08 22:23:18 +0000358##
359##
Girish Gowdrafe649702019-10-30 12:49:58 +0530360
361# A hack to force a re-build of common/main.cc everytime.
362# This is needed to bake in the git VCS information in the openolt binary
363# at the time of building the openolt package.
364common/main.o: .FORCE
365.FORCE:
366 $(CXX) $(CXXFLAGS) $(CPPFLAGS) -I./common -c common/main.cc -o common/main.o
367
Shad Ansari627b5782018-08-13 22:49:32 +0000368common/%.o: common/%.cc
Humera Kouser5ac56612019-07-25 20:23:01 -0400369 $(CXX) $(CXXFLAGS) $(CPPFLAGS) -I./common -c $< -o $@
Shad Ansari7193ae22018-08-08 22:23:18 +0000370
371########################################################################
372##
373##
Craig Lutgen88a22ad2018-10-04 12:30:46 -0500374## device
375##
376##
Girish Gowdrab0337eb2022-03-25 16:44:21 -0700377device/%.o: device/%.cc
378 $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -I./common -I./src -c $< -o $@
Craig Lutgen88a22ad2018-10-04 12:30:46 -0500379
Girish Gowdrab0337eb2022-03-25 16:44:21 -0700380device/$(OPENOLTDEVICE)/%.o: device/$(OPENOLTDEVICE)/%.cc
Craig Lutgen88a22ad2018-10-04 12:30:46 -0500381 $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) -c $< -o $@
382
383########################################################################
384##
385##
Shad Ansari627b5782018-08-13 22:49:32 +0000386## openolt
387##
388##
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400389OLT_SW_UPGRADE_DIR = ../olt-sw-upgrade
Girish Gowdrab0337eb2022-03-25 16:44:21 -0700390SRCS = $(wildcard src/*.cc) $(wildcard common/*.cc) $(wildcard device/*.cc) $(wildcard device/$(OPENOLTDEVICE)/*.cc)
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400391ANSIBLE_DIR = /etc/ansible
Shad Ansari01b0e652018-04-05 21:02:53 +0000392OBJS = $(SRCS:.cc=.o)
393DEPS = $(SRCS:.cc=.d)
Arthur Syu094df162022-04-21 17:50:06 +0800394ZYXEL_DOCKER_PATCH = ZYXEL_Docker_V$(DEV_VER).patch
395
396ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
397PREREQ = sdk
398else
399PREREQ = $(BUILD_DIR)/lib$(BALLIBNAME).so sdk protos $(OBJS)
400endif
Shad Ansari01b0e652018-04-05 21:02:53 +0000401.DEFAULT_GOAL := all
Shad Ansari2ae27672019-05-09 00:26:34 +0000402all: $(BUILD_DIR)/openolt
Arthur Syu094df162022-04-21 17:50:06 +0800403$(BUILD_DIR)/openolt: $(PREREQ)
404ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
405 if [ ! -f "Dockerfile" ]; then \
406 git apply --whitespace=nowarn download/$(ZYXEL_DOCKER_PATCH); \
407 fi;
408 if !(docker images | grep -q onl-builder-8-openolt); then \
409 docker build . -t onl-builder-8-openolt; \
410 fi;
411 docker/tools/onlbuilder -8 --isolate -c make -C agent OPENOLTDEVICE=sda3016ss openolt-in-docker
412else
Girish Gowdra1935e6a2020-10-31 21:48:22 -0700413 $(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $@ -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc) $(PCAPPLUSPLUS_LIB_PATH)
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530414ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
415 ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/radisys/release/release_radisys_v$(BAL_VER).tar.gz $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
416else
Jason Huang09b73ea2020-01-08 17:52:05 +0800417 ln -sf $(TOP_DIR)/$(BAL_DIR)/build/fs/$(OPENOLTDEVICE)/release/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz $(BUILD_DIR)/.
Thiyagarajan Subramaniaf1a5fb2022-02-24 18:32:05 +0530418endif
Girish Gowdra252f4972020-09-07 21:24:01 -0700419 ln -sf $(LIBGRPC_PATH)/libz.so.1 $(BUILD_DIR)/libz.so.1
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000420 ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 $(BUILD_DIR)/libstdc++.so.6
421 strip $(BUILD_DIR)/openolt
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530422 echo "inband=n" > $(ONL_DIR)/onl_build.mode
423 if [ $(INBAND) = y ]; then \
424 echo "Building ONL+BAL+OpenoltAgent allinone image"; \
425 make deb; \
426 make inband-onl; \
427 fi;
Arthur Syu094df162022-04-21 17:50:06 +0800428endif
429
430openolt-in-docker: protos $(OBJS)
431 $(CXX) $(LDFLAGS) -L$(BALLIBDIR) $(OBJS) $(OPENOLT_API_LIB) $(LIBPROTOBUF_PATH)/libprotobuf.a -o $(BUILD_DIR)/openolt -l$(BALLIBNAME) $(shell pkg-config --libs protobuf grpc++ grpc) $(PCAPPLUSPLUS_LIB_PATH)
432 ln -sf $(TOP_DIR)/$(BAL_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER)-$(DEV_VER).tar.gz $(BUILD_DIR)/.
433 ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_reference/host_api/strip/libbal_host_$(BAL_API_TYPE).so $(BUILD_DIR)/.
434 ln -sf $(TOP_DIR)/$(BAL_DIR)/build/host_driver/dev_mgmt_daemon/dev_mgmt_daemon $(BUILD_DIR)/.
435 ln -sf $(LIBGRPC_PATH)/libz.so.1 $(BUILD_DIR)/libz.so.1
436 ln -sf /usr/lib/x86_64-linux-gnu/libstdc++.so.6 $(BUILD_DIR)/libstdc++.so.6
437 strip $(BUILD_DIR)/openolt
438 echo "inband=n" > $(ONL_DIR)/onl_build.mode
439 mkdir -p tmp/opt/openolt
440 cp build/libbal_host_$(BAL_API_TYPE).so build/openolt tmp/opt/openolt
441 tar zcf build/release_$(OPENOLTDEVICE)_openolt_V$(BAL_VER)-$(DEV_VER).tar.gz tmp/
442 rm -rf tmp
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530443
Shad Ansari627b5782018-08-13 22:49:32 +0000444src/%.o: src/%.cc
Humera Kouser5ac56612019-07-25 20:23:01 -0400445 $(CXX) $(CXXFLAGS) $(CXXFLAGSDEVICE) $(CPPFLAGS) -I./common -c $< -o $@
Shad Ansari01b0e652018-04-05 21:02:53 +0000446
Orhan Kupusogluec57af02021-05-12 12:38:17 +0000447deb: rxtx-power
Arthur Syu094df162022-04-21 17:50:06 +0800448ifeq ("$(strip $(OPENOLTDEVICE))","sda3016ss")
449 mkdir -p device/$(OPENOLTDEVICE)/mkdebian/tmp
450 cp download/release_$(OPENOLTDEVICE)_custom_V2.0.0.1-$(DEV_VER).tar.gz device/$(OPENOLTDEVICE)/mkdebian/tmp
451 cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER)-$(DEV_VER) device/$(OPENOLTDEVICE)/mkdebian/tmp
452 cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_openolt_V$(BAL_VER)-$(DEV_VER).tar.gz device/$(OPENOLTDEVICE)/mkdebian/tmp
453else
Jason Huang09b73ea2020-01-08 17:52:05 +0800454 cp $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz device/$(OPENOLTDEVICE)/mkdebian/debian
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000455 cp $(BUILD_DIR)/openolt device/$(OPENOLTDEVICE)/mkdebian/debian
Girish Gowdra252f4972020-09-07 21:24:01 -0700456 cp $(BUILD_DIR)/libz.so.1 device/$(OPENOLTDEVICE)/mkdebian/debian
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000457 cp $(BUILD_DIR)/libstdc++.so.6 device/$(OPENOLTDEVICE)/mkdebian/debian
Girish Gowdra5287fde2021-07-31 00:41:45 +0000458 cp $(BUILD_DIR)/libbal_host_api-oss.so device/$(OPENOLTDEVICE)/mkdebian/debian
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000459 cp -a scripts/init.d device/$(OPENOLTDEVICE)/mkdebian/debian
Orhan Kupusogluec57af02021-05-12 12:38:17 +0000460 cp -a $(RXTX_POWER_EXE) device/$(OPENOLTDEVICE)/mkdebian/debian
Arthur Syu094df162022-04-21 17:50:06 +0800461 cp -a scripts/watchdog device/$(OPENOLTDEVICE)/mkdebian/debian
462endif
Thiyagarajan Subramani4e62e172021-06-25 17:31:30 +0530463ifeq ("$(strip $(OPENOLTDEVICE))",$(findstring "$(strip $(OPENOLTDEVICE))", "rlt-3200g-w" "rlt-1600g-w" "rlt-1600x-w"))
464 sed -i '/\/opt\/bcm68650\/svk_init.sh/c\ \/opt\/bcm68650\/svk_init.sh -qsfp_speed=$(PORT_QSFP_SPEED) -sfp_speed=$(PORT_SFP_SPEED)' device/$(OPENOLTDEVICE)/mkdebian/debian/init.d/dev_mgmt_daemon
Thiyagarajan Subramani3e8bfd92021-04-26 15:07:14 +0530465endif
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000466 cd device/$(OPENOLTDEVICE)/mkdebian && ./build_$(OPENOLTDEVICE)_deb.sh
Thiyagarajan Subramani3e8bfd92021-04-26 15:07:14 +0530467 mv device/$(OPENOLTDEVICE)/$(OPENOLTDEVICE)_*.deb $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb
Shad Ansaricb004c52018-05-30 18:07:23 +0000468 make deb-cleanup
Shad Ansari6cd46a62018-05-13 23:20:51 +0000469
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530470inband-onl:
471 # Clean previous ONL build and build freshly
472 sudo rm -rf $(ONL_DIR)
473 mkdir -p $(ONL_DIR)
474 git clone https://github.com/opencomputeproject/OpenNetworkLinux.git $(ONL_DIR)/OpenNetworkLinux
475 cp download/Makefile.onl $(ONL_DIR)/Makefile
476 install -m 755 download/build-onl.sh $(ONL_DIR)/OpenNetworkLinux
477
478 # Check ONL commit equals to Inband patch commit
479 ONL_COMMIT_ID=$(awk \'/COMMIT_ID = /{print $0}\' $(ONL_DIR)/Makefile | awk -F \"=\" \'{print $2}\')
480 INBAND_PATCH_COMMIT_ID=$(echo cp $(TOP_DIR)/inband/patch/*.patch | cut -d- -f 2 | cut -d. -f 1)
481 if [ "$(ONL_COMMIT_ID)" = "$(INBAND_PATCH_COMMIT_ID)" ]; then \
482 echo "ONL commit and inband patch commit matched."; \
483 cp $(TOP_DIR)/inband/patch/*.patch $(ONL_DIR)/OpenNetworkLinux; \
Girish Gowdraa1640802021-11-24 20:24:38 -0800484 cp $(TOP_DIR)/download/disable-certificate-validation-v*.patch $(ONL_DIR)/OpenNetworkLinux; \
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530485 else \
486 echo "ONL commit and inband patch commit does not match. Exiting."; \
487 exit 1; \
488 fi;
489
Girish Gowdra6e745522020-07-15 15:52:13 -0700490 # Update inband.config file with VLAN ID argument passed
491 sed -i 's/asfvolt16_vlan_id_eth2=.*/asfvolt16_vlan_id_eth2=$(VLAN_ID)/' $(TOP_DIR)/inband/config/inband.config
492 sed -i 's/asgvolt64_vlan_id_eth1=.*/asgvolt64_vlan_id_eth1=$(VLAN_ID)/' $(TOP_DIR)/inband/config/inband.config
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530493
494 # Copy Inband config files and olt startup scripts to ONL source code and build
495 cd $(TOP_DIR) && mkdir -p $(ONL_DIR)/OpenNetworkLinux/bal_packages
496 cp $(TOP_DIR)/inband/scripts/* $(ONL_DIR)/OpenNetworkLinux/bal_packages
Girish Gowdra6e745522020-07-15 15:52:13 -0700497 cp $(TOP_DIR)/inband/config/inband.config $(ONL_DIR)/OpenNetworkLinux/bal_packages
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530498 cp $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb $(ONL_DIR)/OpenNetworkLinux/bal_packages/openolt_$(OPENOLTDEVICE).deb
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400499 cp $(OLT_SW_UPGRADE_DIR)/change_labels.sh $(ONL_DIR)/OpenNetworkLinux/bal_packages
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530500
501 # Rebuild ONL packed with already built BAL+Openolt debian package
502 make -C $(ONL_DIR) onl-$(ONL_KERN_VER_MAJOR) INBAND=y
503 echo "inband=y" > $(ONL_DIR)/onl_build.mode
504 make inband-onl-cleanup
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400505# requires 'sudo' privileges
506
507ansible:
508 (ONL_INSTALLED_INSTALLER="$(shell find "$$(cd ./build/onl/OpenNetworkLinux/RELEASE/jessie/amd64; pwd)" -name "ONL-onl-*_AMD64_INSTALLED_INSTALLER")"; \
509 rm -rf $(ANSIBLE_DIR)/roles/upgrade/files; \
510 mkdir -p $(ANSIBLE_DIR)/roles/upgrade/files; \
511 cp ../olt-sw-upgrade/install_onl.sh $(ANSIBLE_DIR)/roles/upgrade/files; \
512 chmod +x $(ANSIBLE_DIR)/roles/upgrade/files/*.sh; \
513 ln -s $$ONL_INSTALLED_INSTALLER $(ANSIBLE_DIR)/roles/upgrade/files/ONL_INSTALLED_INSTALLER)
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530514
Shad Ansari01b0e652018-04-05 21:02:53 +0000515src/%.o: %.cpp
516 $(CXX) -MMD -c $< -o $@
517
Orhan Kupusogluec57af02021-05-12 12:38:17 +0000518rxtx-power: clean-rxtx-power
519 $(CXX) -std=c++11 -DRXTX_POWER_EXE_MODE src/trx_eeprom_reader.cc -o $(RXTX_POWER_EXE) && ls -l $(RXTX_POWER_EXE)
520
521deb-cleanup: clean-rxtx-power
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000522 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).debhelper.log
523 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).postinst.debhelper
524 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).postrm.debhelper
525 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE).substvars
526 @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/$(OPENOLTDEVICE)/
527 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/debhelper-build-stamp
Girish Gowdra252f4972020-09-07 21:24:01 -0700528 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libz.so.1
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000529 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libstdc++.so.6
Girish Gowdra5287fde2021-07-31 00:41:45 +0000530 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/libbal_host_api-oss.so
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000531 @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/init.d/
532 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/openolt
Jason Huang09b73ea2020-01-08 17:52:05 +0800533 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000534 @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/tmp/
535 @rm -f device/$(OPENOLTDEVICE)/$(OPENOLTDEVICE)_$(BAL_VER)+edgecore-V$(DEV_VER)_amd64.changes
Orhan Kupusogluec57af02021-05-12 12:38:17 +0000536 @rm -f device/$(OPENOLTDEVICE)/mkdebian/debian/$(RXTX_POWER_EXE)
Girish Gowdrab8c09fa2021-08-02 10:22:59 -0700537 @rm -rf device/$(OPENOLTDEVICE)/mkdebian/debian/watchdog/
Arthur Syu094df162022-04-21 17:50:06 +0800538 @rm -rf device/$(OPENOLTDEVICE)/mkdebian/tmp/
Shad Ansaricc01de12018-05-21 22:54:45 +0000539
Thiyagarajan Subramanie84935d2020-04-23 17:45:44 +0530540inband-onl-cleanup:
541 @rm -f $(ONL_DIR)/OpenNetworkLinux/*.patch
542 @rm -rf $(ONL_DIR)/OpenNetworkLinux/bal_packages
543
Shad Ansaricb004c52018-05-30 18:07:23 +0000544clean: protos-clean deb-cleanup
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000545 @rm -f $(OBJS) $(DEPS)
546 @rm -rf $(OPENOLT_PROTOS_DIR)/googleapis
Girish Gowdra252f4972020-09-07 21:24:01 -0700547 @rm -f $(BUILD_DIR)/libz.so.1
Girish Gowdra5287fde2021-07-31 00:41:45 +0000548 @rm -f $(BUILD_DIR)/libbal_host_api-oss.so
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000549 @rm -f $(BUILD_DIR)/openolt
Girish Gowdraab7ea552020-01-07 13:25:15 +0530550 @rm -f $(BUILD_DIR)/dev_mgmt_daemon
Jason Huang09b73ea2020-01-08 17:52:05 +0800551 @rm -f $(BUILD_DIR)/release_$(OPENOLTDEVICE)_V$(BAL_VER).$(DEV_VER).tar.gz
Girish Gowdrabc6e0852020-03-26 11:36:12 -0700552 @rm -f $(BUILD_DIR)/openolt_$(OPENOLTDEVICE)-$(VERSION)-$(LABEL_VCS_REF).deb
Shad Ansari19249582018-04-30 04:31:00 +0000553
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000554clean-src: protos-clean
555 @rm -f $(OBJS) $(DEPS)
556
Orhan Kupusogluec57af02021-05-12 12:38:17 +0000557clean-rxtx-power:
558 @rm -f src/$(RXTX_POWER_EXE)
559 @rm -f $(RXTX_POWER_EXE)
560
Thiyagarajan Subramani89fffc02019-05-13 21:33:20 +0000561distclean: clean-src clean
562 @rm -rf $(BUILD_DIR)
Shad Ansaricb004c52018-05-30 18:07:23 +0000563
Humera Kouser9c2bd9f2020-09-25 02:41:29 -0400564.PHONY: onl sdk bal protos inband-onl ansible .FORCE