Basic gradle build structure
Change-Id: I07a8097955ad77d002663fcc62cc9a1988f2eaf5
diff --git a/build.gradle b/build.gradle
new file mode 100644
index 0000000..519db66
--- /dev/null
+++ b/build.gradle
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+import org.opencord.gradle.rules.*
+import org.yaml.snakeyaml.Yaml
+
+allprojects {
+ apply plugin: 'base'
+ apply plugin: 'de.gesellix.docker'
+ //apply plugin: 'com.tmiyamon.config'
+
+ docker {
+ // dockerHost = System.env.DOCKER_HOST ?: 'unix:///var/run/docker.sock'
+ // dockerHost = System.env.DOCKER_HOST ?: 'https://192.168.99.100:2376'
+ // certPath = System.getProperty('docker.cert.path') ?: "${System.getProperty('user.home')}/.docker/machine/machines/default"
+ // authConfigPlain = [
+ // "username" : "joe",
+ // "password" : "some-pw-as-needed",
+ // "email" : "joe@acme.com",
+ // "serveraddress" : "https://index.docker.io/v1/"
+ // ]
+ }
+}
+
+ext {
+
+ // Upstream registry to simplify filling out the comps table below
+ upstreamReg = project.hasProperty('upstreamReg') ? project.getProperty('upstreamReg') : 'docker.io'
+
+ // Target registry to be used to publish docker images needed for deployment
+ targetReg = project.hasProperty('targetReg') ? project.getProperty('targetReg') : 'localhost:5000'
+
+ // The tag used to tag the docker images push to the target registry
+ targetTag = project.hasProperty('targetTag') ? project.getProperty('targetTag') : 'candidate'
+
+ // Component table
+ comps = [
+ ]
+
+ // Deployment target config file (yaml format); this can be overwritten from the command line
+ // using the -PdeployConfig=<file-path> syntax.
+ deployConfig = project.hasProperty('deployConfig') ? project.getProperty('deployConfig') : './config/default.yml'
+
+}
+
+// ------------- PlaceHolders ----------------
+
+task updateDocker (type: Exec) {
+ commandLine 'sudo', 'utils/enable-remote-docker-registry', "$targetReg"
+}
+
+task prime {
+ // TODO this is a place-holder.
+ dependsOn updateDocker
+ doFirst {
+ println "Using deployment config: $deployConfig"
+ File configFile = new File(deployConfig)
+ def yaml = new Yaml()
+ def config = yaml.load(configFile.newReader())
+ println "Config: $config"
+ println "Access some data in config:\n\tSeed server IP=${config.seedServer.ip}"
+ }
+}
+
+// ---------------- Useful tasks ----------------
+
+task fetchUpstreamImages {
+ comps.each { name, spec -> if (spec.type == 'image') { dependsOn "fetch" + name } }
+}
+
+task fetchGitSubmodules {
+ comps.each { name, spec -> if (spec.type == 'gitmodule') { dependsOn "gitupdate" + name } }
+}
+
+task fetch {
+ dependsOn fetchUpstreamImages
+ dependsOn fetchGitSubmodules
+}
+
+task publishImages {
+ comps.each { name, spec -> if (spec.type == 'image') { dependsOn "publish" + name } }
+}
+
+task publish {
+ dependsOn publishImages
+}
+
+tasks.addRule(new DockerFetchRule(project))
+tasks.addRule(new DockerPublishRule(project))
+tasks.addRule(new DockerTagRule(project))
+tasks.addRule(new GitSubmoduleUpdateRule(project))
+
+task deploy {
+ // TODO this is a place-holder.
+ doFirst {
+ println "Using deployment config: $deployConfig"
+ File configFile = new File(deployConfig)
+ def yaml = new Yaml()
+ def config = yaml.load(configFile.newReader())
+ println "Config: $config"
+ println "Access some data in config:\n\tSeed server IP=${config.seedServer.ip}"
+ }
+}
+
diff --git a/buildSrc/build.gradle b/buildSrc/build.gradle
new file mode 100644
index 0000000..cbb6652
--- /dev/null
+++ b/buildSrc/build.gradle
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+apply plugin: 'groovy'
+
+repositories {
+ // maven { url 'https://repo.gradle.org/gradle/libs' }
+ maven { url 'https://plugins.gradle.org/m2/' }
+ // mavenCentral()
+}
+
+dependencies {
+ compile gradleApi()
+ compile localGroovy()
+ compile 'de.gesellix:gradle-docker-plugin:2016-05-05T13-15-11'
+ compile 'org.yaml:snakeyaml:1.10'
+ //compile 'gradle.plugin.com.tmiyamon:gradle-config:0.2.1'
+}
diff --git a/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerFetchRule.groovy b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerFetchRule.groovy
new file mode 100644
index 0000000..a9bb91b
--- /dev/null
+++ b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerFetchRule.groovy
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.opencord.gradle.rules
+
+import org.gradle.api.Rule
+import de.gesellix.gradle.docker.tasks.DockerPullTask
+
+
+/**
+ * Gradle Rule class to fetch a docker image
+ */
+class DockerFetchRule implements Rule {
+
+ def project
+
+ DockerFetchRule(project) {
+ this.project = project
+ }
+
+ String getDescription() {
+ 'Rule Usage: fetch<component-name>'
+ }
+
+ void apply(String taskName) {
+ if (taskName.startsWith('fetch')) {
+ project.task(taskName, type: DockerPullTask) {
+ ext.compName = taskName - 'fetch'
+ def spec = project.comps[ext.compName]
+ imageName = spec.name + '@' + spec.digest
+ }
+ }
+ }
+}
diff --git a/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerPublishRule.groovy b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerPublishRule.groovy
new file mode 100644
index 0000000..a1d8164
--- /dev/null
+++ b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerPublishRule.groovy
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.opencord.gradle.rules
+
+import org.gradle.api.Rule
+import de.gesellix.gradle.docker.tasks.DockerPushTask
+
+
+/**
+ * Gradle Rule class to publish (push) a docker image to a private repo
+ */
+class DockerPublishRule implements Rule {
+
+ def project
+
+ DockerPublishRule(project) {
+ this.project = project
+ }
+
+ String getDescription() {
+ 'Rule Usage: publish<component-name>'
+ }
+
+ void apply(String taskName) {
+ if (taskName.startsWith('publish')) {
+ project.task(taskName, type: DockerPushTask) {
+ ext.compName = taskName - 'publish'
+ println "Publish rule: $taskName + $compName"
+ def tagTask = "tag$compName"
+ println "Tagtask: $tagTask"
+ dependsOn tagTask
+ def spec = project.comps[ext.compName]
+ repositoryName = spec.name + ':' + project.targetTag
+ registry = project.targetReg
+ }
+ }
+ }
+}
diff --git a/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerTagRule.groovy b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerTagRule.groovy
new file mode 100644
index 0000000..474e16d
--- /dev/null
+++ b/buildSrc/src/main/groovy/org/opencord/gradle/rules/DockerTagRule.groovy
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.opencord.gradle.rules
+
+import org.gradle.api.Rule
+import de.gesellix.gradle.docker.tasks.DockerTagTask
+
+
+/**
+ * Gradle Rule class to tag a docker image
+ */
+class DockerTagRule implements Rule {
+
+ def project
+
+ DockerTagRule(project) {
+ this.project = project
+ }
+
+ String getDescription() {
+ 'Rule Usage: tag<component-name>'
+ }
+
+ void apply(String taskName) {
+ if (taskName.startsWith('tag') && !taskName.equals('tag')) {
+ project.task(taskName, type: DockerTagTask) {
+ ext.compName = taskName - 'tag'
+ def spec = project.comps[compName]
+ imageId = spec.name + '@' + spec.digest
+ tag = compName + ':' + project.targetTag
+ }
+ }
+ }
+}
diff --git a/buildSrc/src/main/groovy/org/opencord/gradle/rules/GitSubmoduleUpdateRule.groovy b/buildSrc/src/main/groovy/org/opencord/gradle/rules/GitSubmoduleUpdateRule.groovy
new file mode 100644
index 0000000..3b46424
--- /dev/null
+++ b/buildSrc/src/main/groovy/org/opencord/gradle/rules/GitSubmoduleUpdateRule.groovy
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 the original author or authors.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package org.opencord.gradle.rules
+
+import org.gradle.api.Rule
+import org.gradle.api.tasks.Exec
+
+
+/**
+ * Gradle Rule class to fetch a docker image
+ */
+class GitSubmoduleUpdateRule implements Rule {
+
+ def project
+
+ GitSubmoduleUpdateRule(project) {
+ this.project = project
+ }
+
+ String getDescription() {
+ 'Rule Usage: gitupdate<component-name>'
+ }
+
+ void apply(String taskName) {
+ if (taskName.startsWith('gitupdate')) {
+ project.task(taskName, type: Exec) {
+ ext.compName = taskName - 'gitupdate'
+ def spec = project.comps[ext.compName]
+ workingDir = '.'
+ commandLine '/usr/bin/git', 'submodule', 'update', '--init', '--recursive', spec.componentDir
+ }
+ }
+ }
+}
diff --git a/config/default.yml b/config/default.yml
new file mode 100644
index 0000000..0be591e
--- /dev/null
+++ b/config/default.yml
@@ -0,0 +1,47 @@
+# Deployment configuration for VirtualBox based head node.
+#
+# This deployment configuration can be utilized with the head node created
+# via `vargrant up headnode` from the gerrit.opencord.org/maas repository.
+---
+seedServer:
+ ip: '10.100.198.201'
+
+ # User name and password used by Ansible to connect to the host for remote
+ # provisioning
+ user: 'vagrant'
+ password: 'vagrant'
+
+ # Specifies tasks within the head node provisioning not to execute, including:
+ #
+ # switch_support - don't download the switch ONL images as there are no
+ # switches in this configuration
+ # interface_config - don't update the network configuration of the headnode
+ # as it is configured by vagrant to the proper settings
+ skipTags:
+ - 'switch_support'
+ - 'interface_config'
+
+ management_ip: '10.1.0.1/24'
+ management_iface: 'eth2'
+ external_iface: 'eth0'
+ management_network: '10.1.0.0/24'
+
+ # Specifies the extra settings required for this configuration
+ #
+ # virtualbox_support - install support for managing virtual box based
+ # compute nodes
+ virtualbox_support: 1
+ power_helper_user: 'cord'
+
+docker:
+ imageVersion: candidate
+
+otherServers:
+ # Specifies the configuration for dynamically added compute nodes
+ location: 'http://gerrit.opencord.org/maas'
+ rolesPath: 'roles'
+ role: 'compute-node'
+ fabric:
+ network: '10.1.1.1/24'
+ range_low: '10.1.1.2'
+ range_high: '10.1.1.253'
diff --git a/config/onlab_develop_pod.yml b/config/onlab_develop_pod.yml
new file mode 100644
index 0000000..f095e6c
--- /dev/null
+++ b/config/onlab_develop_pod.yml
@@ -0,0 +1,42 @@
+# Deployment configuration for a phyical hardware POD
+---
+seedServer:
+ ip: '10.90.0.2'
+ # User name and password used by Ansible to connect to the host for remote
+ # provisioning
+ user: 'admin'
+ password: 'onos_test'
+ # Network address information for the head node:
+ #
+ # fabric_ip - the IP address and mask bits to be used to configure the network
+ # interface connected to the leaf - spine fabric
+ #
+ # management_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node to the POD internal
+ # management network. The head node will deliver DHCP addresses to
+ # the other compute nodes over this interface
+ #
+ # external_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node (and the POD) to the
+ # Internet. All traffic in the POD to external hosts will be
+ # NAT-ed through this interface
+ fabric_ip: '10.6.1.1/24'
+ management_ip: '10.6.0.1/24'
+ external_ip: '47.135.132.21/24'
+ management_iface: 'em2'
+ external_iface: 'em1'
+ skipTags:
+ - 'interface_config'
+
+docker:
+ imageVersion: candidate
+
+otherNodes:
+ # Experimental
+ #
+ # Specifies the subnet and address range that will be used to allocate IP addresses
+ # to the compute nodes as they are deployed into the POD.
+ fabric:
+ network: 10.6.1.1/24
+ range_low: 10.6.1.2
+ range_high: 10.6.1.253
diff --git a/gradle.properties b/gradle.properties
new file mode 100644
index 0000000..1a644c7
--- /dev/null
+++ b/gradle.properties
@@ -0,0 +1 @@
+org.gradle.daemon=true
diff --git a/gradle/wrapper/gradle-wrapper.jar b/gradle/wrapper/gradle-wrapper.jar
new file mode 100644
index 0000000..2c6137b
--- /dev/null
+++ b/gradle/wrapper/gradle-wrapper.jar
Binary files differ
diff --git a/gradle/wrapper/gradle-wrapper.properties b/gradle/wrapper/gradle-wrapper.properties
new file mode 100644
index 0000000..cf051c0
--- /dev/null
+++ b/gradle/wrapper/gradle-wrapper.properties
@@ -0,0 +1,6 @@
+#Thu May 05 16:09:18 PDT 2016
+distributionBase=GRADLE_USER_HOME
+distributionPath=wrapper/dists
+zipStoreBase=GRADLE_USER_HOME
+zipStorePath=wrapper/dists
+distributionUrl=https\://services.gradle.org/distributions/gradle-2.13-all.zip
diff --git a/gradlew b/gradlew
new file mode 100755
index 0000000..9d82f78
--- /dev/null
+++ b/gradlew
@@ -0,0 +1,160 @@
+#!/usr/bin/env bash
+
+##############################################################################
+##
+## Gradle start up script for UN*X
+##
+##############################################################################
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS=""
+
+APP_NAME="Gradle"
+APP_BASE_NAME=`basename "$0"`
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD="maximum"
+
+warn ( ) {
+ echo "$*"
+}
+
+die ( ) {
+ echo
+ echo "$*"
+ echo
+ exit 1
+}
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+case "`uname`" in
+ CYGWIN* )
+ cygwin=true
+ ;;
+ Darwin* )
+ darwin=true
+ ;;
+ MINGW* )
+ msys=true
+ ;;
+esac
+
+# Attempt to set APP_HOME
+# Resolve links: $0 may be a link
+PRG="$0"
+# Need this for relative symlinks.
+while [ -h "$PRG" ] ; do
+ ls=`ls -ld "$PRG"`
+ link=`expr "$ls" : '.*-> \(.*\)$'`
+ if expr "$link" : '/.*' > /dev/null; then
+ PRG="$link"
+ else
+ PRG=`dirname "$PRG"`"/$link"
+ fi
+done
+SAVED="`pwd`"
+cd "`dirname \"$PRG\"`/" >/dev/null
+APP_HOME="`pwd -P`"
+cd "$SAVED" >/dev/null
+
+CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+ if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+ # IBM's JDK on AIX uses strange locations for the executables
+ JAVACMD="$JAVA_HOME/jre/sh/java"
+ else
+ JAVACMD="$JAVA_HOME/bin/java"
+ fi
+ if [ ! -x "$JAVACMD" ] ; then
+ die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+ fi
+else
+ JAVACMD="java"
+ which java >/dev/null 2>&1 || die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+fi
+
+# Increase the maximum file descriptors if we can.
+if [ "$cygwin" = "false" -a "$darwin" = "false" ] ; then
+ MAX_FD_LIMIT=`ulimit -H -n`
+ if [ $? -eq 0 ] ; then
+ if [ "$MAX_FD" = "maximum" -o "$MAX_FD" = "max" ] ; then
+ MAX_FD="$MAX_FD_LIMIT"
+ fi
+ ulimit -n $MAX_FD
+ if [ $? -ne 0 ] ; then
+ warn "Could not set maximum file descriptor limit: $MAX_FD"
+ fi
+ else
+ warn "Could not query maximum file descriptor limit: $MAX_FD_LIMIT"
+ fi
+fi
+
+# For Darwin, add options to specify how the application appears in the dock
+if $darwin; then
+ GRADLE_OPTS="$GRADLE_OPTS \"-Xdock:name=$APP_NAME\" \"-Xdock:icon=$APP_HOME/media/gradle.icns\""
+fi
+
+# For Cygwin, switch paths to Windows format before running java
+if $cygwin ; then
+ APP_HOME=`cygpath --path --mixed "$APP_HOME"`
+ CLASSPATH=`cygpath --path --mixed "$CLASSPATH"`
+ JAVACMD=`cygpath --unix "$JAVACMD"`
+
+ # We build the pattern for arguments to be converted via cygpath
+ ROOTDIRSRAW=`find -L / -maxdepth 1 -mindepth 1 -type d 2>/dev/null`
+ SEP=""
+ for dir in $ROOTDIRSRAW ; do
+ ROOTDIRS="$ROOTDIRS$SEP$dir"
+ SEP="|"
+ done
+ OURCYGPATTERN="(^($ROOTDIRS))"
+ # Add a user-defined pattern to the cygpath arguments
+ if [ "$GRADLE_CYGPATTERN" != "" ] ; then
+ OURCYGPATTERN="$OURCYGPATTERN|($GRADLE_CYGPATTERN)"
+ fi
+ # Now convert the arguments - kludge to limit ourselves to /bin/sh
+ i=0
+ for arg in "$@" ; do
+ CHECK=`echo "$arg"|egrep -c "$OURCYGPATTERN" -`
+ CHECK2=`echo "$arg"|egrep -c "^-"` ### Determine if an option
+
+ if [ $CHECK -ne 0 ] && [ $CHECK2 -eq 0 ] ; then ### Added a condition
+ eval `echo args$i`=`cygpath --path --ignore --mixed "$arg"`
+ else
+ eval `echo args$i`="\"$arg\""
+ fi
+ i=$((i+1))
+ done
+ case $i in
+ (0) set -- ;;
+ (1) set -- "$args0" ;;
+ (2) set -- "$args0" "$args1" ;;
+ (3) set -- "$args0" "$args1" "$args2" ;;
+ (4) set -- "$args0" "$args1" "$args2" "$args3" ;;
+ (5) set -- "$args0" "$args1" "$args2" "$args3" "$args4" ;;
+ (6) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" ;;
+ (7) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" ;;
+ (8) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" ;;
+ (9) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" "$args8" ;;
+ esac
+fi
+
+# Split up the JVM_OPTS And GRADLE_OPTS values into an array, following the shell quoting and substitution rules
+function splitJvmOpts() {
+ JVM_OPTS=("$@")
+}
+eval splitJvmOpts $DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS
+JVM_OPTS[${#JVM_OPTS[*]}]="-Dorg.gradle.appname=$APP_BASE_NAME"
+
+exec "$JAVACMD" "${JVM_OPTS[@]}" -classpath "$CLASSPATH" org.gradle.wrapper.GradleWrapperMain "$@"
diff --git a/gradlew.bat b/gradlew.bat
new file mode 100644
index 0000000..72d362d
--- /dev/null
+++ b/gradlew.bat
@@ -0,0 +1,90 @@
+@if "%DEBUG%" == "" @echo off
+@rem ##########################################################################
+@rem
+@rem Gradle startup script for Windows
+@rem
+@rem ##########################################################################
+
+@rem Set local scope for the variables with windows NT shell
+if "%OS%"=="Windows_NT" setlocal
+
+@rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+set DEFAULT_JVM_OPTS=
+
+set DIRNAME=%~dp0
+if "%DIRNAME%" == "" set DIRNAME=.
+set APP_BASE_NAME=%~n0
+set APP_HOME=%DIRNAME%
+
+@rem Find java.exe
+if defined JAVA_HOME goto findJavaFromJavaHome
+
+set JAVA_EXE=java.exe
+%JAVA_EXE% -version >NUL 2>&1
+if "%ERRORLEVEL%" == "0" goto init
+
+echo.
+echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+echo.
+echo Please set the JAVA_HOME variable in your environment to match the
+echo location of your Java installation.
+
+goto fail
+
+:findJavaFromJavaHome
+set JAVA_HOME=%JAVA_HOME:"=%
+set JAVA_EXE=%JAVA_HOME%/bin/java.exe
+
+if exist "%JAVA_EXE%" goto init
+
+echo.
+echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME%
+echo.
+echo Please set the JAVA_HOME variable in your environment to match the
+echo location of your Java installation.
+
+goto fail
+
+:init
+@rem Get command-line arguments, handling Windows variants
+
+if not "%OS%" == "Windows_NT" goto win9xME_args
+if "%@eval[2+2]" == "4" goto 4NT_args
+
+:win9xME_args
+@rem Slurp the command line arguments.
+set CMD_LINE_ARGS=
+set _SKIP=2
+
+:win9xME_args_slurp
+if "x%~1" == "x" goto execute
+
+set CMD_LINE_ARGS=%*
+goto execute
+
+:4NT_args
+@rem Get arguments from the 4NT Shell from JP Software
+set CMD_LINE_ARGS=%$
+
+:execute
+@rem Setup the command line
+
+set CLASSPATH=%APP_HOME%\gradle\wrapper\gradle-wrapper.jar
+
+@rem Execute Gradle
+"%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" org.gradle.wrapper.GradleWrapperMain %CMD_LINE_ARGS%
+
+:end
+@rem End local scope for the variables with windows NT shell
+if "%ERRORLEVEL%"=="0" goto mainEnd
+
+:fail
+rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of
+rem the _cmd.exe /c_ return code!
+if not "" == "%GRADLE_EXIT_CONSOLE%" exit 1
+exit /b 1
+
+:mainEnd
+if "%OS%"=="Windows_NT" endlocal
+
+:omega