Basic gradle build structure
Change-Id: I07a8097955ad77d002663fcc62cc9a1988f2eaf5
diff --git a/config/default.yml b/config/default.yml
new file mode 100644
index 0000000..0be591e
--- /dev/null
+++ b/config/default.yml
@@ -0,0 +1,47 @@
+# Deployment configuration for VirtualBox based head node.
+#
+# This deployment configuration can be utilized with the head node created
+# via `vargrant up headnode` from the gerrit.opencord.org/maas repository.
+---
+seedServer:
+ ip: '10.100.198.201'
+
+ # User name and password used by Ansible to connect to the host for remote
+ # provisioning
+ user: 'vagrant'
+ password: 'vagrant'
+
+ # Specifies tasks within the head node provisioning not to execute, including:
+ #
+ # switch_support - don't download the switch ONL images as there are no
+ # switches in this configuration
+ # interface_config - don't update the network configuration of the headnode
+ # as it is configured by vagrant to the proper settings
+ skipTags:
+ - 'switch_support'
+ - 'interface_config'
+
+ management_ip: '10.1.0.1/24'
+ management_iface: 'eth2'
+ external_iface: 'eth0'
+ management_network: '10.1.0.0/24'
+
+ # Specifies the extra settings required for this configuration
+ #
+ # virtualbox_support - install support for managing virtual box based
+ # compute nodes
+ virtualbox_support: 1
+ power_helper_user: 'cord'
+
+docker:
+ imageVersion: candidate
+
+otherServers:
+ # Specifies the configuration for dynamically added compute nodes
+ location: 'http://gerrit.opencord.org/maas'
+ rolesPath: 'roles'
+ role: 'compute-node'
+ fabric:
+ network: '10.1.1.1/24'
+ range_low: '10.1.1.2'
+ range_high: '10.1.1.253'
diff --git a/config/onlab_develop_pod.yml b/config/onlab_develop_pod.yml
new file mode 100644
index 0000000..f095e6c
--- /dev/null
+++ b/config/onlab_develop_pod.yml
@@ -0,0 +1,42 @@
+# Deployment configuration for a phyical hardware POD
+---
+seedServer:
+ ip: '10.90.0.2'
+ # User name and password used by Ansible to connect to the host for remote
+ # provisioning
+ user: 'admin'
+ password: 'onos_test'
+ # Network address information for the head node:
+ #
+ # fabric_ip - the IP address and mask bits to be used to configure the network
+ # interface connected to the leaf - spine fabric
+ #
+ # management_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node to the POD internal
+ # management network. The head node will deliver DHCP addresses to
+ # the other compute nodes over this interface
+ #
+ # external_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node (and the POD) to the
+ # Internet. All traffic in the POD to external hosts will be
+ # NAT-ed through this interface
+ fabric_ip: '10.6.1.1/24'
+ management_ip: '10.6.0.1/24'
+ external_ip: '47.135.132.21/24'
+ management_iface: 'em2'
+ external_iface: 'em1'
+ skipTags:
+ - 'interface_config'
+
+docker:
+ imageVersion: candidate
+
+otherNodes:
+ # Experimental
+ #
+ # Specifies the subnet and address range that will be used to allocate IP addresses
+ # to the compute nodes as they are deployed into the POD.
+ fabric:
+ network: 10.6.1.1/24
+ range_low: 10.6.1.2
+ range_high: 10.6.1.253