blob: f095e6cb0a6f7361a93ebf853213b4c4b708767f [file] [log] [blame]
Andy Bavieradea0fd2016-07-06 05:26:26 -04001# Deployment configuration for a phyical hardware POD
2---
3seedServer:
4 ip: '10.90.0.2'
5 # User name and password used by Ansible to connect to the host for remote
6 # provisioning
7 user: 'admin'
8 password: 'onos_test'
9 # Network address information for the head node:
10 #
11 # fabric_ip - the IP address and mask bits to be used to configure the network
12 # interface connected to the leaf - spine fabric
13 #
14 # management_ip - the IP address and mask bits to be used to configure the network
15 # interface connecting the head node to the POD internal
16 # management network. The head node will deliver DHCP addresses to
17 # the other compute nodes over this interface
18 #
19 # external_ip - the IP address and mask bits to be used to configure the network
20 # interface connecting the head node (and the POD) to the
21 # Internet. All traffic in the POD to external hosts will be
22 # NAT-ed through this interface
23 fabric_ip: '10.6.1.1/24'
24 management_ip: '10.6.0.1/24'
25 external_ip: '47.135.132.21/24'
26 management_iface: 'em2'
27 external_iface: 'em1'
28 skipTags:
29 - 'interface_config'
30
31docker:
32 imageVersion: candidate
33
34otherNodes:
35 # Experimental
36 #
37 # Specifies the subnet and address range that will be used to allocate IP addresses
38 # to the compute nodes as they are deployed into the POD.
39 fabric:
40 network: 10.6.1.1/24
41 range_low: 10.6.1.2
42 range_high: 10.6.1.253