| # Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onf-mcord-pod1-fabric.yaml http://10.90.0.131:30007/run |
| |
| tosca_definitions_version: tosca_simple_yaml_1_0 |
| imports: |
| - custom_types/switch.yaml |
| - custom_types/switchport.yaml |
| - custom_types/portinterface.yaml |
| - custom_types/bngportmapping.yaml |
| - custom_types/attworkflowdriverwhitelistentry.yaml |
| - custom_types/attworkflowdriverservice.yaml |
| - custom_types/serviceinstanceattribute.yaml |
| - custom_types/onosapp.yaml |
| |
| description: Configures the ONF SEBA POD with AT&T workflow |
| |
| topology_template: |
| node_templates: |
| # Fabric configuration |
| switch#leaf_1: |
| type: tosca.nodes.Switch |
| properties: |
| driver: ofdpa3 |
| ipv4Loopback: 192.168.0.201 |
| ipv4NodeSid: 17 |
| isEdgeRouter: True |
| name: AGG_SWITCH |
| ofId: of:0000000000000001 |
| routerMac: 00:00:02:01:06:01 |
| |
| # Setup the OLT switch port |
| port#olt_port: |
| type: tosca.nodes.SwitchPort |
| properties: |
| portId: 2 |
| host_learning: false |
| requirements: |
| - switch: |
| node: switch#leaf_1 |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Port connected to the BNG |
| port#bng_port: |
| type: tosca.nodes.SwitchPort |
| properties: |
| portId: 31 |
| requirements: |
| - switch: |
| node: switch#leaf_1 |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Setup the fabric switch port where the external |
| # router is connected to |
| bngmapping: |
| type: tosca.nodes.BNGPortMapping |
| properties: |
| s_tag: any |
| switch_port: 31 |
| |
| # DHCP L2 Relay config |
| onos_app#dhcpl2relay: |
| type: tosca.nodes.ONOSApp |
| properties: |
| name: dhcpl2relay |
| must-exist: true |
| |
| dhcpl2relay-config-attr: |
| type: tosca.nodes.ServiceInstanceAttribute |
| properties: |
| name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay |
| value: > |
| { |
| "dhcpl2relay" : { |
| "useOltUplinkForServerPktInOut" : false, |
| "dhcpServerConnectPoints" : [ "of:0000000000000001/31" ] |
| } |
| } |
| requirements: |
| - service_instance: |
| node: onos_app#dhcpl2relay |
| relationship: tosca.relationships.BelongsToOne |
| |
| # ONU Whitelist |
| service#att: |
| type: tosca.nodes.AttWorkflowDriverService |
| properties: |
| name: att-workflow-driver |
| must-exist: true |
| |
| BRCM22222222: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: BRCM22222222 |
| # pon_port_id: 536870912 |
| pon_port_id: 12345678 |
| device_id: of:000000000a5a0072 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| ALPHe3d1cfde: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: ALPHe3d1cfde |
| pon_port_id: 536870912 |
| device_id: of:000000000a5a0072 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| ISKT71e801a0: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: ISKT71e801a0 |
| pon_port_id: 536870912 |
| device_id: of:000000000a5a0072 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |