| # Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-fabric.yaml http://10.192.4.241:30007/run |
| |
| tosca_definitions_version: tosca_simple_yaml_1_0 |
| imports: |
| - custom_types/switch.yaml |
| - custom_types/switchport.yaml |
| - custom_types/portinterface.yaml |
| - custom_types/vrouterserviceinstance.yaml |
| - custom_types/vrouterstaticroute.yaml |
| |
| description: Configures the ONF SEBA POD with AT&T workflow |
| |
| topology_template: |
| node_templates: |
| # Fabric configuration |
| switch#leaf_1: |
| type: tosca.nodes.Switch |
| properties: |
| driver: ofdpa3 |
| ipv4Loopback: 192.168.9.24 |
| ipv4NodeSid: 17 |
| isEdgeRouter: false |
| name: Fabric Switch - 1 |
| ofId: of:0000cc37ab5b6da8 |
| routerMac: 00:00:00:00:00:03 |
| |
| # Setup the OLT switch port |
| port#olt_port: |
| type: tosca.nodes.SwitchPort |
| properties: |
| portId: 7 |
| host_learning: false |
| requirements: |
| - switch: |
| node: switch#leaf_1 |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Setup the OLT switch port interface |
| interface#olt_interface: |
| type: tosca.nodes.PortInterface |
| properties: |
| ips: 10.8.2.254/24 |
| name: olt_interface |
| requirements: |
| - port: |
| node: port#olt_port |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Setup the fabric switch port where the external |
| # router is connected to |
| port#upstream_port: |
| type: tosca.nodes.SwitchPort |
| properties: |
| portId: 8 |
| requirements: |
| - switch: |
| node: switch#leaf_1 |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Setup the fabric switch port interface where the |
| # external router is connected to |
| interface#upstream_interface: |
| type: tosca.nodes.PortInterface |
| properties: |
| name: upstream_interface |
| vlanUntagged: 40 |
| ips: 10.8.3.254/24 |
| requirements: |
| - port: |
| node: port#upstream_port |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Add a vRouter (ONOS) |
| vrouter#my_vrouter: |
| type: tosca.nodes.VRouterServiceInstance |
| properties: |
| name: my_vrouter |
| |
| # Add a static route to the vRouter (ONOS) |
| route#my_route: |
| type: tosca.nodes.VRouterStaticRoute |
| properties: |
| prefix: "0.0.0.0/0" |
| next_hop: "10.8.3.1" |
| requirements: |
| - vrouter: |
| node: vrouter#my_vrouter |
| relationship: tosca.relationships.BelongsToOne |