| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-shad.yaml http://10.90.0.101:30007/run |
| |
| tosca_definitions_version: tosca_simple_yaml_1_0 |
| imports: |
| - custom_types/oltdevice.yaml |
| - custom_types/onudevice.yaml |
| - custom_types/voltservice.yaml |
| - custom_types/rcordsubscriber.yaml |
| - custom_types/attworkflowdriverwhitelistentry.yaml |
| - custom_types/attworkflowdriverservice.yaml |
| description: Create a simulated OLT Device in VOLTHA |
| topology_template: |
| node_templates: |
| |
| service#volt: |
| type: tosca.nodes.VOLTService |
| properties: |
| name: volt |
| must-exist: true |
| |
| # OLT ------------------------------------------------ |
| olt_device: |
| type: tosca.nodes.OLTDevice |
| properties: |
| name: SHAD OLT |
| device_type: openolt |
| host: 10.90.0.151 |
| port: 9191 |
| switch_datapath_id: of:0000000000000001 |
| switch_port: "2" |
| outer_tpid: "0x8100" |
| uplink: "65536" |
| nas_id: "NAS_ID" |
| requirements: |
| - volt_service: |
| node: service#volt |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Whitelist ------------------------------------------------ |
| service#att: |
| type: tosca.nodes.AttWorkflowDriverService |
| properties: |
| name: att-workflow-driver |
| must-exist: true |
| |
| ALPHe3d1cfe3: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: ALPHe3d1cfe3 |
| pon_port_id: 536870912 |
| device_id: of:000000000a5a0097 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| ISKT71E80080: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: ISKT71E80080 |
| pon_port_id: 536870912 |
| device_id: of:000000000a5a0097 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Subscriber ------------------------------------------------ |
| shad_1: |
| type: tosca.nodes.RCORDSubscriber |
| properties: |
| name: Sub_ALPHe3d1cfe3 |
| status: pre-provisioned |
| c_tag: 115 |
| s_tag: 222 |
| onu_device: ALPHe3d1cfe3 |
| nas_port_id : "PON 1/1/03/1:1.1.1" |
| circuit_id: foo1 |
| remote_id: bar1 |
| |
| shad_2: |
| type: tosca.nodes.RCORDSubscriber |
| properties: |
| name: Sub_ISKT71E80080 |
| status: pre-provisioned |
| c_tag: 222 |
| s_tag: 222 |
| onu_device: ISKT71e80080 |
| nas_port_id : "PON 1/1/04/1:1.1.1" |
| circuit_id: foo2 |
| remote_id: bar2 |