blob: 607f2f2a3e6c40587d97df246c4eca757cb207e0 [file] [log] [blame]
# Copyright 2017-present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbsim-2.yaml http://10.90.0.120:30007/run
tosca_definitions_version: tosca_simple_yaml_1_0
imports:
- custom_types/oltdevice.yaml
- custom_types/onudevice.yaml
- custom_types/voltservice.yaml
- custom_types/bngportmapping.yaml
- custom_types/attworkflowdriverwhitelistentry.yaml
- custom_types/attworkflowdriverservice.yaml
- custom_types/rcordsubscriber.yaml
- custom_types/serviceinstanceattribute.yaml
- custom_types/onosapp.yaml
description: Create a simulated OLT Device in VOLTHA
topology_template:
node_templates:
service#volt:
type: tosca.nodes.VOLTService
properties:
name: volt
must-exist: true
olt_device:
type: tosca.nodes.OLTDevice
properties:
name: BBSIM_OLT
device_type: bbsimolt
host: bbsim.voltha.svc
port: 50060
switch_datapath_id: of:0000000000000002
switch_port: "3"
outer_tpid: "0x8100"
uplink: "65536"
nas_id: "NAS_ID"
serial_number: "bbsim.voltha.svc:50060"
requirements:
- volt_service:
node: service#volt
relationship: tosca.relationships.BelongsToOne
# map the BNG to a port
# this is not really used by BBSIM as there's no data-plane traffic,
# but it's required by NEM to configure the crossconnect
bngmapping:
type: tosca.nodes.BNGPortMapping
properties:
s_tag: any
switch_port: 1
# DHCP L2 Relay config
onos_app#dhcpl2relay:
type: tosca.nodes.ONOSApp
properties:
name: dhcpl2relay
must-exist: true
dhcpl2relay-config-attr:
type: tosca.nodes.ServiceInstanceAttribute
properties:
name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
value: >
{
"dhcpl2relay" : {
"useOltUplinkForServerPktInOut" : true
}
}
requirements:
- service_instance:
node: onos_app#dhcpl2relay
relationship: tosca.relationships.BelongsToOne
# Whitelist
service#att:
type: tosca.nodes.AttWorkflowDriverService
properties:
name: att-workflow-driver
must-exist: true
BBSM00000100:
type: tosca.nodes.AttWorkflowDriverWhiteListEntry
properties:
serial_number: BBSM00000100
pon_port_id: 536870913
device_id: of:0000000000000012
requirements:
- owner:
node: service#att
relationship: tosca.relationships.BelongsToOne
BBSM00000101:
type: tosca.nodes.AttWorkflowDriverWhiteListEntry
properties:
serial_number: BBSM00000101
pon_port_id: 536870913
device_id: of:0000000000000012
requirements:
- owner:
node: service#att
relationship: tosca.relationships.BelongsToOne
# Pre-provision the subscriber
bbsim_subscriber_0:
type: tosca.nodes.RCORDSubscriber
properties:
name: Sub_BBSM00000100
status: pre-provisioned
c_tag: 900
s_tag: 999
onu_device: BBSM00000100
circuit_id: circuit0
remote_id: remote0
nas_port_id: PON 2/1/01/1:1.1.0
bbsim_subscriber_1:
type: tosca.nodes.RCORDSubscriber
properties:
name: Sub_BBSM00000101
status: pre-provisioned
c_tag: 901
s_tag: 999
onu_device: BBSM00000101
circuit_id: circuit1
remote_id: remote1
nas_port_id: PON 2/1/01/1:1.1.1