| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @bbsim-2.yaml http://10.90.0.120:30007/run |
| |
| tosca_definitions_version: tosca_simple_yaml_1_0 |
| imports: |
| - custom_types/oltdevice.yaml |
| - custom_types/onudevice.yaml |
| - custom_types/voltservice.yaml |
| - custom_types/bngportmapping.yaml |
| - custom_types/attworkflowdriverwhitelistentry.yaml |
| - custom_types/attworkflowdriverservice.yaml |
| - custom_types/rcordsubscriber.yaml |
| - custom_types/serviceinstanceattribute.yaml |
| - custom_types/onosapp.yaml |
| description: Create a simulated OLT Device in VOLTHA |
| topology_template: |
| node_templates: |
| |
| service#volt: |
| type: tosca.nodes.VOLTService |
| properties: |
| name: volt |
| must-exist: true |
| |
| olt_device: |
| type: tosca.nodes.OLTDevice |
| properties: |
| name: BBSIM_OLT |
| device_type: bbsimolt |
| host: bbsim.voltha.svc |
| port: 50060 |
| switch_datapath_id: of:0000000000000002 |
| switch_port: "3" |
| outer_tpid: "0x8100" |
| uplink: "65536" |
| nas_id: "NAS_ID" |
| serial_number: "bbsim.voltha.svc:50060" |
| requirements: |
| - volt_service: |
| node: service#volt |
| relationship: tosca.relationships.BelongsToOne |
| |
| # map the BNG to a port |
| # this is not really used by BBSIM as there's no data-plane traffic, |
| # but it's required by NEM to configure the crossconnect |
| bngmapping: |
| type: tosca.nodes.BNGPortMapping |
| properties: |
| s_tag: any |
| switch_port: 1 |
| |
| # DHCP L2 Relay config |
| onos_app#dhcpl2relay: |
| type: tosca.nodes.ONOSApp |
| properties: |
| name: dhcpl2relay |
| must-exist: true |
| |
| dhcpl2relay-config-attr: |
| type: tosca.nodes.ServiceInstanceAttribute |
| properties: |
| name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay |
| value: > |
| { |
| "dhcpl2relay" : { |
| "useOltUplinkForServerPktInOut" : true |
| } |
| } |
| requirements: |
| - service_instance: |
| node: onos_app#dhcpl2relay |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Whitelist |
| service#att: |
| type: tosca.nodes.AttWorkflowDriverService |
| properties: |
| name: att-workflow-driver |
| must-exist: true |
| |
| BBSM00000100: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: BBSM00000100 |
| pon_port_id: 536870913 |
| device_id: of:0000000000000012 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| BBSM00000101: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: BBSM00000101 |
| pon_port_id: 536870913 |
| device_id: of:0000000000000012 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Pre-provision the subscriber |
| bbsim_subscriber_0: |
| type: tosca.nodes.RCORDSubscriber |
| properties: |
| name: Sub_BBSM00000100 |
| status: pre-provisioned |
| c_tag: 900 |
| s_tag: 999 |
| onu_device: BBSM00000100 |
| circuit_id: circuit0 |
| remote_id: remote0 |
| nas_port_id: PON 2/1/01/1:1.1.0 |
| |
| bbsim_subscriber_1: |
| type: tosca.nodes.RCORDSubscriber |
| properties: |
| name: Sub_BBSM00000101 |
| status: pre-provisioned |
| c_tag: 901 |
| s_tag: 999 |
| onu_device: BBSM00000101 |
| circuit_id: circuit1 |
| remote_id: remote1 |
| nas_port_id: PON 2/1/01/1:1.1.1 |