blob: 76f16a9200e7f617caf9ecc32826892a598b83c1 [file] [log] [blame]
# Copyright 2017-present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod2-fabric.yaml http://10.90.0.120:30007/run
tosca_definitions_version: tosca_simple_yaml_1_0
imports:
- custom_types/switch.yaml
- custom_types/switchport.yaml
- custom_types/portinterface.yaml
- custom_types/bngportmapping.yaml
- custom_types/attworkflowdriverwhitelistentry.yaml
- custom_types/attworkflowdriverservice.yaml
- custom_types/serviceinstanceattribute.yaml
description: Configures the ONF SEBA POD2 with AT&T workflow
topology_template:
node_templates:
# Fabric configuration
switch#leaf_1:
type: tosca.nodes.Switch
properties:
driver: ofdpa3
ipv4Loopback: 192.168.0.201
ipv4NodeSid: 17
isEdgeRouter: True
name: AGG_SWITCH
ofId: of:0000000000000002
routerMac: 00:00:02:01:06:01
# Setup the OLT switch port
port#olt_port:
type: tosca.nodes.SwitchPort
properties:
portId: 1
host_learning: false
requirements:
- switch:
node: switch#leaf_1
relationship: tosca.relationships.BelongsToOne
# Port connected to the BNG
port#bng_port:
type: tosca.nodes.SwitchPort
properties:
portId: 32
requirements:
- switch:
node: switch#leaf_1
relationship: tosca.relationships.BelongsToOne
# Setup the fabric switch port where the external
# router is connected to
bngmapping:
type: tosca.nodes.BNGPortMapping
properties:
s_tag: any
switch_port: 32
# DHCP L2 Relay config
dhcpl2relay-config-attr:
type: tosca.nodes.ServiceInstanceAttribute
properties:
name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
value: >
{
"dhcpl2relay" : {
"useOltUplinkForServerPktInOut" : false,
"dhcpServerConnectPoints" : [ "of:0000000000000002/32" ]
}
}
requirements:
- service_instance:
node: onos_app#dhcpl2relay
relationship: tosca.relationships.BelongsToOne
# ONU Whitelist
service#att:
type: tosca.nodes.AttWorkflowDriverService
properties:
name: att-workflow-driver
must-exist: true
ALPHe3d1cfe3:
type: tosca.nodes.AttWorkflowDriverWhiteListEntry
properties:
serial_number: ALPHe3d1cfe3
pon_port_id: 536870912
device_id: of:000000000a5a007a
requirements:
- owner:
node: service#att
relationship: tosca.relationships.BelongsToOne
ISKT71e80080:
type: tosca.nodes.AttWorkflowDriverWhiteListEntry
properties:
serial_number: ISKT71e80080
pon_port_id: 536870927
device_id: of:000000000a5a007a
requirements:
- owner:
node: service#att
relationship: tosca.relationships.BelongsToOne