| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-qa-fabric.yaml http://10.90.0.101:30007/run |
| |
| tosca_definitions_version: tosca_simple_yaml_1_0 |
| imports: |
| - custom_types/switch.yaml |
| - custom_types/switchport.yaml |
| - custom_types/portinterface.yaml |
| - custom_types/bngportmapping.yaml |
| - custom_types/attworkflowdriverwhitelistentry.yaml |
| - custom_types/attworkflowdriverservice.yaml |
| - custom_types/serviceinstanceattribute.yaml |
| - custom_types/onosapp.yaml |
| - custom_types/technologyprofile.yaml |
| |
| description: Configures the ONF SEBA POD with AT&T workflow |
| |
| topology_template: |
| node_templates: |
| # Fabric configuration |
| switch#leaf_1: |
| type: tosca.nodes.Switch |
| properties: |
| driver: ofdpa3 |
| ipv4Loopback: 192.168.0.201 |
| ipv4NodeSid: 17 |
| isEdgeRouter: True |
| name: AGG_SWITCH |
| ofId: of:0000000000000001 |
| routerMac: 00:00:02:01:06:01 |
| |
| # Setup the OLT switch port |
| port#olt_port: |
| type: tosca.nodes.SwitchPort |
| properties: |
| portId: 1 |
| host_learning: false |
| requirements: |
| - switch: |
| node: switch#leaf_1 |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Port connected to the BNG |
| port#bng_port: |
| type: tosca.nodes.SwitchPort |
| properties: |
| portId: 31 |
| requirements: |
| - switch: |
| node: switch#leaf_1 |
| relationship: tosca.relationships.BelongsToOne |
| |
| # Setup the fabric switch port where the external |
| # router is connected to |
| bngmapping: |
| type: tosca.nodes.BNGPortMapping |
| properties: |
| s_tag: any |
| switch_port: 31 |
| |
| # DHCP L2 Relay config |
| onos_app#dhcpl2relay: |
| type: tosca.nodes.ONOSApp |
| properties: |
| name: dhcpl2relay |
| must-exist: true |
| |
| dhcpl2relay-config-attr: |
| type: tosca.nodes.ServiceInstanceAttribute |
| properties: |
| name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay |
| value: > |
| { |
| "dhcpl2relay" : { |
| "useOltUplinkForServerPktInOut" : false, |
| "dhcpServerConnectPoints" : [ "of:0000000000000001/31" ] |
| } |
| } |
| requirements: |
| - service_instance: |
| node: onos_app#dhcpl2relay |
| relationship: tosca.relationships.BelongsToOne |
| |
| # ONU Whitelist |
| service#att: |
| type: tosca.nodes.AttWorkflowDriverService |
| properties: |
| name: att-workflow-driver |
| must-exist: true |
| |
| ISKT71e801a0: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: ISKT71e801a0 |
| pon_port_id: 536870912 |
| device_id: of:000000000a5a0072 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| ALPHe3d1cfde: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: ALPHe3d1cfde |
| pon_port_id: 536870912 |
| device_id: of:000000000a5a0072 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| ISKT71e80080: |
| type: tosca.nodes.AttWorkflowDriverWhiteListEntry |
| properties: |
| serial_number: ISKT71e80080 |
| pon_port_id: 536870912 |
| device_id: of:000000000a5a0072 |
| requirements: |
| - owner: |
| node: service#att |
| relationship: tosca.relationships.BelongsToOne |
| |
| technologyProfile: |
| type: tosca.nodes.TechnologyProfile |
| properties: |
| profile_id: 64 |
| technology: xgspon |
| profile_value: > |
| { |
| "name": "4QueueHybridProfileMap1", |
| "profile_type": "XPON", |
| "version": 1.0, |
| "num_gem_ports": 1, |
| "instance_control": { |
| "onu": "multi-instance", |
| "uni": "single-instance", |
| "max_gem_payload_size": "auto" |
| }, |
| "us_scheduler": { |
| "additional_bw": "auto", |
| "direction": "UPSTREAM", |
| "priority": 0, |
| "weight": 0, |
| "q_sched_policy": "hybrid" |
| }, |
| "ds_scheduler": { |
| "additional_bw": "auto", |
| "direction": "DOWNSTREAM", |
| "priority": 0, |
| "weight": 0, |
| "q_sched_policy": "hybrid" |
| }, |
| "upstream_gem_port_attribute_list": [{ |
| "pbit_map": "0b11111111", |
| "aes_encryption": "True", |
| "scheduling_policy": "StrictPriority", |
| "priority_q": 1, |
| "weight": 0, |
| "discard_policy": "TailDrop", |
| "max_q_size": "auto", |
| "discard_config": { |
| "min_threshold": 0, |
| "max_threshold": 0, |
| "max_probability": 0 |
| } |
| } |
| ], |
| "downstream_gem_port_attribute_list": [{ |
| "pbit_map": "0b11111111", |
| "aes_encryption": "True", |
| "scheduling_policy": "StrictPriority", |
| "priority_q": 1, |
| "weight": 0, |
| "discard_policy": "TailDrop", |
| "max_q_size": "auto", |
| "discard_config": { |
| "min_threshold": 0, |
| "max_threshold": 0, |
| "max_probability": 0 |
| } |
| } |
| ] |
| } |