| Luca Prete | a67d353 | 2018-09-14 10:16:10 -0700 | [diff] [blame] | 1 | # Copyright 2017-present Open Networking Foundation |
| 2 | # |
| 3 | # Licensed under the Apache License, Version 2.0 (the "License"); |
| 4 | # you may not use this file except in compliance with the License. |
| 5 | # You may obtain a copy of the License at |
| 6 | # |
| 7 | # http://www.apache.org/licenses/LICENSE-2.0 |
| 8 | # |
| 9 | # Unless required by applicable law or agreed to in writing, software |
| 10 | # distributed under the License is distributed on an "AS IS" BASIS, |
| 11 | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 12 | # See the License for the specific language governing permissions and |
| 13 | # limitations under the License. |
| 14 | |
| 15 | # curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @flex-pod1-olt-fabric.yaml http://10.192.4.241:30007/run |
| 16 | |
| 17 | tosca_definitions_version: tosca_simple_yaml_1_0 |
| 18 | imports: |
| 19 | - custom_types/switch.yaml |
| 20 | - custom_types/switchport.yaml |
| 21 | - custom_types/portinterface.yaml |
| 22 | - custom_types/vrouterserviceinstance.yaml |
| 23 | - custom_types/vrouterstaticroute.yaml |
| 24 | |
| 25 | description: Configures the ONF SEBA POD with AT&T workflow |
| 26 | |
| 27 | topology_template: |
| 28 | node_templates: |
| 29 | # Fabric configuration |
| 30 | switch#leaf_1: |
| 31 | type: tosca.nodes.Switch |
| 32 | properties: |
| 33 | driver: ofdpa3 |
| 34 | ipv4Loopback: 192.168.9.24 |
| 35 | ipv4NodeSid: 17 |
| 36 | isEdgeRouter: false |
| 37 | name: Fabric Switch - 1 |
| 38 | ofId: of:0000cc37ab5b6da8 |
| 39 | routerMac: 00:00:00:00:00:03 |
| 40 | |
| 41 | # Setup the OLT switch port |
| 42 | port#olt_port: |
| 43 | type: tosca.nodes.SwitchPort |
| 44 | properties: |
| 45 | portId: 7 |
| 46 | host_learning: false |
| 47 | requirements: |
| 48 | - switch: |
| 49 | node: switch#leaf_1 |
| 50 | relationship: tosca.relationships.BelongsToOne |
| 51 | |
| 52 | # Setup the OLT switch port interface |
| 53 | interface#olt_interface: |
| 54 | type: tosca.nodes.PortInterface |
| 55 | properties: |
| 56 | ips: 10.8.2.254/24 |
| 57 | name: olt_interface |
| 58 | requirements: |
| 59 | - port: |
| 60 | node: port#olt_port |
| 61 | relationship: tosca.relationships.BelongsToOne |
| 62 | |
| 63 | # Setup the fabric switch port where the external |
| 64 | # router is connected to |
| 65 | port#upstream_port: |
| 66 | type: tosca.nodes.SwitchPort |
| 67 | properties: |
| 68 | portId: 8 |
| 69 | requirements: |
| 70 | - switch: |
| 71 | node: switch#leaf_1 |
| 72 | relationship: tosca.relationships.BelongsToOne |
| 73 | |
| 74 | # Setup the fabric switch port interface where the |
| 75 | # external router is connected to |
| 76 | interface#upstream_interface: |
| 77 | type: tosca.nodes.PortInterface |
| 78 | properties: |
| 79 | name: upstream_interface |
| 80 | vlanUntagged: 40 |
| 81 | ips: 10.8.3.254/24 |
| 82 | requirements: |
| 83 | - port: |
| 84 | node: port#upstream_port |
| 85 | relationship: tosca.relationships.BelongsToOne |
| 86 | |
| 87 | # Add a vRouter (ONOS) |
| 88 | vrouter#my_vrouter: |
| 89 | type: tosca.nodes.VRouterServiceInstance |
| 90 | properties: |
| 91 | name: my_vrouter |
| 92 | |
| 93 | # Add a static route to the vRouter (ONOS) |
| 94 | route#my_route: |
| 95 | type: tosca.nodes.VRouterStaticRoute |
| 96 | properties: |
| 97 | prefix: "0.0.0.0/0" |
| 98 | next_hop: "10.8.3.1" |
| 99 | requirements: |
| 100 | - vrouter: |
| 101 | node: vrouter#my_vrouter |
| 102 | relationship: tosca.relationships.BelongsToOne |