tosca-configs/att-workflow/onlab-pod1-qa-fabric.yaml

# Copyright 2017-present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# curl -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @onlab-pod1-qa-fabric.yaml http://10.90.0.101:30007/run

tosca_definitions_version: tosca_simple_yaml_1_0
imports:
  - custom_types/switch.yaml
  - custom_types/switchport.yaml
  - custom_types/portinterface.yaml
  - custom_types/bngportmapping.yaml
  - custom_types/attworkflowdriverwhitelistentry.yaml
  - custom_types/attworkflowdriverservice.yaml
  - custom_types/serviceinstanceattribute.yaml
  - custom_types/onosapp.yaml
  - custom_types/technologyprofile.yaml

description: Configures the ONF SEBA POD with AT&T workflow

topology_template:
  node_templates:
    # Fabric configuration
    switch#leaf_1:
      type: tosca.nodes.Switch
      properties:
        driver: ofdpa3
        ipv4Loopback: 192.168.0.201
        ipv4NodeSid: 17
        isEdgeRouter: True
        name: AGG_SWITCH
        ofId: of:0000000000000001
        routerMac: 00:00:02:01:06:01

    # Setup the OLT switch port
    port#olt_port:
      type: tosca.nodes.SwitchPort
      properties:
        portId: 1
        host_learning: false
      requirements:
        - switch:
            node: switch#leaf_1
            relationship: tosca.relationships.BelongsToOne

    # Port connected to the BNG
    port#bng_port:
      type: tosca.nodes.SwitchPort
      properties:
        portId: 31
      requirements:
        - switch:
            node: switch#leaf_1
            relationship: tosca.relationships.BelongsToOne

    # Setup the fabric switch port where the external
    # router is connected to
    bngmapping:
      type: tosca.nodes.BNGPortMapping
      properties:
        s_tag: any
        switch_port: 31

    # DHCP L2 Relay config
    onos_app#dhcpl2relay:
      type: tosca.nodes.ONOSApp
      properties:
        name: dhcpl2relay
        must-exist: true

    dhcpl2relay-config-attr:
      type: tosca.nodes.ServiceInstanceAttribute
      properties:
        name: /onos/v1/network/configuration/apps/org.opencord.dhcpl2relay
        value: >
          {
            "dhcpl2relay" : {
              "useOltUplinkForServerPktInOut" : false,
              "dhcpServerConnectPoints" : [ "of:0000000000000001/31" ]
            }
          }
      requirements:
        - service_instance:
            node: onos_app#dhcpl2relay
            relationship: tosca.relationships.BelongsToOne

    # ONU Whitelist
    service#att:
      type: tosca.nodes.AttWorkflowDriverService
      properties:
        name: att-workflow-driver
        must-exist: true

    BRCM22222222:
      type: tosca.nodes.AttWorkflowDriverWhiteListEntry
      properties:
        serial_number: BRCM22222222
        # pon_port_id: 536870912
        pon_port_id: 12345678
        device_id: of:000000000a5a0072
      requirements:
        - owner:
            node: service#att
            relationship: tosca.relationships.BelongsToOne

    ALPHe3d1cfde:
      type: tosca.nodes.AttWorkflowDriverWhiteListEntry
      properties:
        serial_number: ALPHe3d1cfde
        pon_port_id: 536870912
        device_id: of:000000000a5a0072
      requirements:
        - owner:
            node: service#att
            relationship: tosca.relationships.BelongsToOne

    ISKT71e80080:
      type: tosca.nodes.AttWorkflowDriverWhiteListEntry
      properties:
        serial_number: ISKT71e80080
        pon_port_id: 536870912
        device_id: of:000000000a5a0072
      requirements:
        - owner:
            node: service#att
            relationship: tosca.relationships.BelongsToOne

    technologyProfile:
      type: tosca.nodes.TechnologyProfile
      properties:
        profile_id: 64
        technology: xgspon
        profile_value: >
          {
            "name": "4QueueHybridProfileMap1",
            "profile_type": "XPON",
            "version": 1,
            "num_gem_ports": 4,
            "instance_control": {
              "onu": "multi-instance",
              "uni": "single-instance",
              "max_gem_payload_size": "auto"
            },
            "us_scheduler": {
              "additional_bw": "auto",
              "direction": "UPSTREAM",
              "priority": 0,
              "weight": 0,
              "q_sched_policy": "hybrid"
            },
            "ds_scheduler": {
              "additional_bw": "auto",
              "direction": "DOWNSTREAM",
              "priority": 0,
              "weight": 0,
              "q_sched_policy": "hybrid"
            },
            "upstream_gem_port_attribute_list": [
              {
                "pbit_map": "0b00000101",
                "aes_encryption": "True",
                "scheduling_policy": "WRR",
                "priority_q": 4,
                "weight": 25,
                "discard_policy": "TailDrop",
                "max_q_size": "auto",
                "discard_config": {
                  "max_threshold": 0,
                  "min_threshold": 0,
                  "max_probability": 0
                }
              },
              {
                "pbit_map": "0b00011010",
                "aes_encryption": "True",
                "scheduling_policy": "WRR",
                "priority_q": 3,
                "weight": 75,
                "discard_policy": "TailDrop",
                "max_q_size": "auto",
                "discard_config": {
                  "min_threshold": 0,
                  "max_threshold": 0,
                  "max_probability": 0
                }
              },
              {
                "pbit_map": "0b00100000",
                "aes_encryption": "True",
                "scheduling_policy": "StrictPriority",
                "priority_q": 2,
                "weight": 0,
                "discard_policy": "TailDrop",
                "max_q_size": "auto",
                "discard_config": {
                  "min_threshold": 0,
                  "max_threshold": 0,
                  "max_probability": 0
                }
              },
              {
                "pbit_map": "0b11000000",
                "aes_encryption": "True",
                "scheduling_policy": "StrictPriority",
                "priority_q": 1,
                "weight": 25,
                "discard_policy": "TailDrop",
                "max_q_size": "auto",
                "discard_config": {
                  "min_threshold": 0,
                  "max_threshold": 0,
                  "max_probability": 0
                }
              }
            ],
            "downstream_gem_port_attribute_list": [
              {
                "pbit_map": "0b00000101",
                "aes_encryption": "True",
                "scheduling_policy": "WRR",
                "priority_q": 4,
                "weight": 10,
                "discard_policy": "TailDrop",
                "max_q_size": "auto",
                "discard_config": {
                  "min_threshold": 0,
                  "max_threshold": 0,
                  "max_probability": 0
                }
              },
              {
                "pbit_map": "0b00011010",
                "aes_encryption": "True",
                "scheduling_policy": "WRR",
                "priority_q": 3,
                "weight": 90,
                "discard_policy": "TailDrop",
                "max_q_size": "auto",
                "discard_config": {
                  "min_threshold": 0,
                  "max_threshold": 0,
                  "max_probability": 0
                }
              },
              {
                "pbit_map": "0b00100000",
                "aes_encryption": "True",
                "scheduling_policy": "StrictPriority",
                "priority_q": 2,
                "weight": 0,
                "discard_policy": "TailDrop",
                "max_q_size": "auto",
                "discard_config": {
                  "min_threshold": 0,
                  "max_threshold": 0,
                  "max_probability": 0
                }
              },
              {
                "pbit_map": "0b11000000",
                "aes_encryption": "True",
                "scheduling_policy": "StrictPriority",
                "priority_q": 1,
                "weight": 25,
                "discard_policy": "TailDrop",
                "max_q_size": "auto",
                "discard_config": {
                  "min_threshold": 0,
                  "max_threshold": 0,
                  "max_probability": 0
                }
              }
            ]
          }