| /* |
| * OSPF Link State Advertisement |
| * Copyright (C) 1999, 2000 Toshiaki Takada |
| * |
| * This file is part of GNU Zebra. |
| * |
| * GNU Zebra is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * GNU Zebra is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with GNU Zebra; see the file COPYING. If not, write to the Free |
| * Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| * 02111-1307, USA. |
| */ |
| |
| #include <zebra.h> |
| |
| #include "linklist.h" |
| #include "prefix.h" |
| #include "if.h" |
| #include "table.h" |
| #include "memory.h" |
| #include "stream.h" |
| #include "log.h" |
| #include "thread.h" |
| #include "hash.h" |
| #include "sockunion.h" /* for inet_aton() */ |
| |
| #include "ospfd/ospfd.h" |
| #include "ospfd/ospf_interface.h" |
| #include "ospfd/ospf_ism.h" |
| #include "ospfd/ospf_asbr.h" |
| #include "ospfd/ospf_lsa.h" |
| #include "ospfd/ospf_lsdb.h" |
| #include "ospfd/ospf_neighbor.h" |
| #include "ospfd/ospf_nsm.h" |
| #include "ospfd/ospf_flood.h" |
| #include "ospfd/ospf_packet.h" |
| #include "ospfd/ospf_spf.h" |
| #include "ospfd/ospf_dump.h" |
| #include "ospfd/ospf_route.h" |
| #include "ospfd/ospf_ase.h" |
| #include "ospfd/ospf_zebra.h" |
| |
| |
| u_int32_t |
| get_metric (u_char *metric) |
| { |
| u_int32_t m; |
| m = metric[0]; |
| m = (m << 8) + metric[1]; |
| m = (m << 8) + metric[2]; |
| return m; |
| } |
| |
| |
| struct timeval |
| tv_adjust (struct timeval a) |
| { |
| while (a.tv_usec >= 1000000) |
| { |
| a.tv_usec -= 1000000; |
| a.tv_sec++; |
| } |
| |
| while (a.tv_usec < 0) |
| { |
| a.tv_usec += 1000000; |
| a.tv_sec--; |
| } |
| |
| return a; |
| } |
| |
| int |
| tv_ceil (struct timeval a) |
| { |
| a = tv_adjust (a); |
| |
| return (a.tv_usec ? a.tv_sec + 1 : a.tv_sec); |
| } |
| |
| int |
| tv_floor (struct timeval a) |
| { |
| a = tv_adjust (a); |
| |
| return a.tv_sec; |
| } |
| |
| struct timeval |
| int2tv (int a) |
| { |
| struct timeval ret; |
| |
| ret.tv_sec = a; |
| ret.tv_usec = 0; |
| |
| return ret; |
| } |
| |
| struct timeval |
| tv_add (struct timeval a, struct timeval b) |
| { |
| struct timeval ret; |
| |
| ret.tv_sec = a.tv_sec + b.tv_sec; |
| ret.tv_usec = a.tv_usec + b.tv_usec; |
| |
| return tv_adjust (ret); |
| } |
| |
| struct timeval |
| tv_sub (struct timeval a, struct timeval b) |
| { |
| struct timeval ret; |
| |
| ret.tv_sec = a.tv_sec - b.tv_sec; |
| ret.tv_usec = a.tv_usec - b.tv_usec; |
| |
| return tv_adjust (ret); |
| } |
| |
| int |
| tv_cmp (struct timeval a, struct timeval b) |
| { |
| return (a.tv_sec == b.tv_sec ? |
| a.tv_usec - b.tv_usec : a.tv_sec - b.tv_sec); |
| } |
| |
| int |
| ospf_lsa_refresh_delay (struct ospf_lsa *lsa) |
| { |
| struct timeval delta, now; |
| int delay = 0; |
| |
| gettimeofday (&now, NULL); |
| delta = tv_sub (now, lsa->tv_orig); |
| |
| if (tv_cmp (delta, int2tv (OSPF_MIN_LS_INTERVAL)) < 0) |
| { |
| delay = tv_ceil (tv_sub (int2tv (OSPF_MIN_LS_INTERVAL), delta)); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type%d:%s]: Refresh timer delay %d seconds", |
| lsa->data->type, inet_ntoa (lsa->data->id), delay); |
| |
| assert (delay > 0); |
| } |
| |
| return delay; |
| } |
| |
| |
| int |
| get_age (struct ospf_lsa *lsa) |
| { |
| int age; |
| struct timeval now; |
| |
| gettimeofday (&now, NULL); |
| age = ntohs (lsa->data->ls_age) + tv_floor (tv_sub (now, lsa->tv_recv)); |
| |
| return age; |
| } |
| |
| |
| /* Fletcher Checksum -- Refer to RFC1008. */ |
| #define MODX 4102 |
| #define LSA_CHECKSUM_OFFSET 15 |
| |
| u_int16_t |
| ospf_lsa_checksum (struct lsa_header *lsa) |
| { |
| u_char *sp, *ep, *p, *q; |
| int c0 = 0, c1 = 0; |
| int x, y; |
| u_int16_t length; |
| |
| lsa->checksum = 0; |
| length = ntohs (lsa->length) - 2; |
| sp = (char *) &lsa->options; |
| |
| for (ep = sp + length; sp < ep; sp = q) |
| { |
| q = sp + MODX; |
| if (q > ep) |
| q = ep; |
| for (p = sp; p < q; p++) |
| { |
| c0 += *p; |
| c1 += c0; |
| } |
| c0 %= 255; |
| c1 %= 255; |
| } |
| |
| x = ((length - LSA_CHECKSUM_OFFSET) * c0 - c1) % 255; |
| if (x <= 0) |
| x += 255; |
| y = 510 - c0 - x; |
| if (y > 255) |
| y -= 255; |
| |
| /* take care endian issue. */ |
| lsa->checksum = htons ((x << 8) + y); |
| |
| return (lsa->checksum); |
| } |
| |
| |
| |
| /* Create OSPF LSA. */ |
| struct ospf_lsa * |
| ospf_lsa_new () |
| { |
| struct ospf_lsa *new; |
| |
| new = XCALLOC (MTYPE_OSPF_LSA, sizeof (struct ospf_lsa)); |
| memset (new, 0, sizeof (struct ospf_lsa)); |
| |
| new->flags = 0; |
| new->lock = 1; |
| new->retransmit_counter = 0; |
| gettimeofday (&new->tv_recv, NULL); |
| new->tv_orig = new->tv_recv; |
| new->refresh_list = -1; |
| |
| return new; |
| } |
| |
| /* Duplicate OSPF LSA. */ |
| struct ospf_lsa * |
| ospf_lsa_dup (struct ospf_lsa *lsa) |
| { |
| struct ospf_lsa *new; |
| |
| if (lsa == NULL) |
| return NULL; |
| |
| new = XCALLOC (MTYPE_OSPF_LSA, sizeof (struct ospf_lsa)); |
| |
| memcpy (new, lsa, sizeof (struct ospf_lsa)); |
| UNSET_FLAG (new->flags, OSPF_LSA_DISCARD); |
| new->lock = 1; |
| new->retransmit_counter = 0; |
| new->data = ospf_lsa_data_dup (lsa->data); |
| |
| /* kevinm: Clear the refresh_list, otherwise there are going |
| to be problems when we try to remove the LSA from the |
| queue (which it's not a member of.) |
| XXX: Should we add the LSA to the refresh_list queue? */ |
| new->refresh_list = -1; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA)) |
| zlog_info ("LSA: duplicated %p (new: %p)", lsa, new); |
| |
| return new; |
| } |
| |
| /* Free OSPF LSA. */ |
| void |
| ospf_lsa_free (struct ospf_lsa *lsa) |
| { |
| assert (lsa->lock == 0); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA)) |
| zlog_info ("LSA: freed %p", lsa); |
| |
| /* Delete LSA data. */ |
| if (lsa->data != NULL) |
| ospf_lsa_data_free (lsa->data); |
| |
| assert (lsa->refresh_list < 0); |
| |
| memset (lsa, 0, sizeof (struct ospf_lsa)); |
| XFREE (MTYPE_OSPF_LSA, lsa); |
| } |
| |
| /* Lock LSA. */ |
| struct ospf_lsa * |
| ospf_lsa_lock (struct ospf_lsa *lsa) |
| { |
| lsa->lock++; |
| return lsa; |
| } |
| |
| /* Unlock LSA. */ |
| void |
| ospf_lsa_unlock (struct ospf_lsa *lsa) |
| { |
| /* This is sanity check. */ |
| if (!lsa) |
| return; |
| |
| lsa->lock--; |
| |
| assert (lsa->lock >= 0); |
| |
| if (lsa->lock == 0) |
| { |
| assert (CHECK_FLAG (lsa->flags, OSPF_LSA_DISCARD)); |
| ospf_lsa_free (lsa); |
| } |
| } |
| |
| /* Check discard flag. */ |
| void |
| ospf_lsa_discard (struct ospf_lsa *lsa) |
| { |
| if (!CHECK_FLAG (lsa->flags, OSPF_LSA_DISCARD)) |
| { |
| SET_FLAG (lsa->flags, OSPF_LSA_DISCARD); |
| ospf_lsa_unlock (lsa); |
| } |
| } |
| |
| /* Create LSA data. */ |
| struct lsa_header * |
| ospf_lsa_data_new (size_t size) |
| { |
| struct lsa_header *new; |
| |
| new = (struct lsa_header *) XMALLOC (MTYPE_OSPF_LSA_DATA, size); |
| memset (new, 0, size); |
| |
| return new; |
| } |
| |
| /* Duplicate LSA data. */ |
| struct lsa_header * |
| ospf_lsa_data_dup (struct lsa_header *lsah) |
| { |
| struct lsa_header *new; |
| |
| new = ospf_lsa_data_new (ntohs (lsah->length)); |
| memcpy (new, lsah, ntohs (lsah->length)); |
| |
| return new; |
| } |
| |
| /* Free LSA data. */ |
| void |
| ospf_lsa_data_free (struct lsa_header *lsah) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA)) |
| zlog_info ("LSA[Type%d:%s]: data freed %p", |
| lsah->type, inet_ntoa (lsah->id), lsah); |
| |
| XFREE (MTYPE_OSPF_LSA_DATA, lsah); |
| } |
| |
| |
| /* LSA general functions. */ |
| |
| const char * |
| dump_lsa_key (struct ospf_lsa *lsa) |
| { |
| static char buf[] = { |
| "Type255,id(255.255.255.255),ar(255.255.255.255)", |
| }; |
| struct lsa_header *lsah; |
| |
| if (lsa != NULL && (lsah = lsa->data) != NULL) |
| { |
| char id[INET_ADDRSTRLEN], ar[INET_ADDRSTRLEN]; |
| strcpy (id, inet_ntoa (lsah->id)); |
| strcpy (ar, inet_ntoa (lsah->adv_router)); |
| |
| sprintf (buf, "Type%d,id(%s),ar(%s)", lsah->type, id, ar); |
| } |
| else |
| strcpy (buf, "NULL"); |
| |
| return buf; |
| } |
| |
| u_int32_t |
| lsa_seqnum_increment (struct ospf_lsa *lsa) |
| { |
| u_int32_t seqnum; |
| |
| seqnum = ntohl (lsa->data->ls_seqnum) + 1; |
| |
| return htonl (seqnum); |
| } |
| |
| void |
| lsa_header_set (struct stream *s, u_char options, |
| u_char type, struct in_addr id, struct in_addr router_id) |
| { |
| struct lsa_header *lsah; |
| |
| lsah = (struct lsa_header *) STREAM_DATA (s); |
| |
| lsah->ls_age = htons (0); |
| lsah->options = options; |
| lsah->type = type; |
| lsah->id = id; |
| lsah->adv_router = router_id; |
| lsah->ls_seqnum = htonl (OSPF_INITIAL_SEQUENCE_NUMBER); |
| |
| ospf_output_forward (s, OSPF_LSA_HEADER_SIZE); |
| } |
| |
| |
| /* router-LSA related functions. */ |
| /* Get router-LSA flags. */ |
| u_char |
| router_lsa_flags (struct ospf_area *area) |
| { |
| u_char flags; |
| |
| flags = area->ospf->flags; |
| |
| /* Set virtual link flag. */ |
| if (ospf_full_virtual_nbrs (area)) |
| SET_FLAG (flags, ROUTER_LSA_VIRTUAL); |
| else |
| /* Just sanity check */ |
| UNSET_FLAG (flags, ROUTER_LSA_VIRTUAL); |
| |
| /* Set Shortcut ABR behabiour flag. */ |
| UNSET_FLAG (flags, ROUTER_LSA_SHORTCUT); |
| if (area->ospf->abr_type == OSPF_ABR_SHORTCUT) |
| if (!OSPF_IS_AREA_BACKBONE (area)) |
| if ((area->shortcut_configured == OSPF_SHORTCUT_DEFAULT && |
| area->ospf->backbone == NULL) || |
| area->shortcut_configured == OSPF_SHORTCUT_ENABLE) |
| SET_FLAG (flags, ROUTER_LSA_SHORTCUT); |
| |
| /* ASBR can't exit in stub area. */ |
| if (area->external_routing == OSPF_AREA_STUB) |
| UNSET_FLAG (flags, OSPF_FLAG_ASBR); |
| |
| return flags; |
| } |
| |
| /* Lookup neighbor other than myself. |
| And check neighbor count, |
| Point-to-Point link must have only 1 neighbor. */ |
| struct ospf_neighbor * |
| ospf_nbr_lookup_ptop (struct ospf_interface *oi) |
| { |
| struct ospf_neighbor *nbr = NULL; |
| struct route_node *rn; |
| |
| /* Search neighbor, there must be one of two nbrs. */ |
| for (rn = route_top (oi->nbrs); rn; rn = route_next (rn)) |
| if ((nbr = rn->info)) |
| if (!IPV4_ADDR_SAME (&nbr->router_id, &oi->ospf->router_id)) |
| if (nbr->state == NSM_Full) |
| { |
| route_unlock_node (rn); |
| break; |
| } |
| |
| /* PtoP link must have only 1 neighbor. */ |
| if (ospf_nbr_count (oi, 0) > 1) |
| zlog_warn ("Point-to-Point link has more than 1 neighobrs."); |
| |
| return nbr; |
| } |
| |
| /* Set a link information. */ |
| void |
| link_info_set (struct stream *s, struct in_addr id, |
| struct in_addr data, u_char type, u_char tos, u_int16_t cost) |
| { |
| /* TOS based routing is not supported. */ |
| stream_put_ipv4 (s, id.s_addr); /* Link ID. */ |
| stream_put_ipv4 (s, data.s_addr); /* Link Data. */ |
| stream_putc (s, type); /* Link Type. */ |
| stream_putc (s, tos); /* TOS = 0. */ |
| stream_putw (s, cost); /* Link Cost. */ |
| } |
| |
| /* Describe Point-to-Point link. */ |
| int |
| lsa_link_ptop_set (struct stream *s, struct ospf_interface *oi) |
| { |
| int links = 0; |
| struct ospf_neighbor *nbr; |
| struct in_addr id, mask; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type1]: Set link Point-to-Point"); |
| |
| if ((nbr = ospf_nbr_lookup_ptop (oi))) |
| if (nbr->state == NSM_Full) |
| { |
| /* For unnumbered point-to-point networks, the Link Data field |
| should specify the interface's MIB-II ifIndex value. */ |
| link_info_set (s, nbr->router_id, oi->address->u.prefix4, |
| LSA_LINK_TYPE_POINTOPOINT, 0, oi->output_cost); |
| links++; |
| } |
| |
| if (oi->connected->destination != NULL) |
| { |
| /* Option 1: |
| link_type = LSA_LINK_TYPE_STUB; |
| link_id = nbr->address.u.prefix4; |
| link_data.s_addr = 0xffffffff; |
| link_cost = o->output_cost; */ |
| |
| id.s_addr = oi->connected->destination->u.prefix4.s_addr; |
| mask.s_addr = 0xffffffff; |
| link_info_set (s, id, mask, LSA_LINK_TYPE_STUB, 0, oi->output_cost); |
| } |
| else |
| { |
| /* Option 2: We need to include link to a stub |
| network regardless of the state of the neighbor */ |
| masklen2ip (oi->address->prefixlen, &mask); |
| id.s_addr = oi->address->u.prefix4.s_addr & mask.s_addr; |
| link_info_set (s, id, mask, LSA_LINK_TYPE_STUB, 0, oi->output_cost); |
| } |
| links++; |
| |
| return links; |
| } |
| |
| /* Describe Broadcast Link. */ |
| int |
| lsa_link_broadcast_set (struct stream *s, struct ospf_interface *oi) |
| { |
| struct ospf_neighbor *dr; |
| struct in_addr id, mask; |
| |
| /* Describe Type 3 Link. */ |
| if (oi->state == ISM_Waiting) |
| { |
| masklen2ip (oi->address->prefixlen, &mask); |
| id.s_addr = oi->address->u.prefix4.s_addr & mask.s_addr; |
| link_info_set (s, id, mask, LSA_LINK_TYPE_STUB, 0, oi->output_cost); |
| return 1; |
| } |
| |
| dr = ospf_nbr_lookup_by_addr (oi->nbrs, &DR (oi)); |
| /* Describe Type 2 link. */ |
| if (dr && (dr->state == NSM_Full || |
| IPV4_ADDR_SAME (&oi->address->u.prefix4, &DR (oi))) && |
| ospf_nbr_count (oi, NSM_Full) > 0) |
| { |
| link_info_set (s, DR (oi), oi->address->u.prefix4, |
| LSA_LINK_TYPE_TRANSIT, 0, oi->output_cost); |
| } |
| /* Describe type 3 link. */ |
| else |
| { |
| masklen2ip (oi->address->prefixlen, &mask); |
| id.s_addr = oi->address->u.prefix4.s_addr & mask.s_addr; |
| link_info_set (s, id, mask, LSA_LINK_TYPE_STUB, 0, oi->output_cost); |
| } |
| return 1; |
| } |
| |
| int |
| lsa_link_loopback_set (struct stream *s, struct ospf_interface *oi) |
| { |
| struct in_addr id, mask; |
| |
| /* Describe Type 3 Link. */ |
| if (oi->state != ISM_Loopback) |
| return 0; |
| |
| mask.s_addr = 0xffffffff; |
| id.s_addr = oi->address->u.prefix4.s_addr; |
| link_info_set (s, id, mask, LSA_LINK_TYPE_STUB, 0, oi->output_cost); |
| return 1; |
| } |
| |
| /* Describe Virtual Link. */ |
| int |
| lsa_link_virtuallink_set (struct stream *s, struct ospf_interface *oi) |
| { |
| struct ospf_neighbor *nbr; |
| |
| if (oi->state == ISM_PointToPoint) |
| if ((nbr = ospf_nbr_lookup_ptop (oi))) |
| if (nbr->state == NSM_Full) |
| { |
| link_info_set (s, nbr->router_id, oi->address->u.prefix4, |
| LSA_LINK_TYPE_VIRTUALLINK, 0, oi->output_cost); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| #define lsa_link_nbma_set(S,O) lsa_link_broadcast_set (S, O) |
| |
| /* this function add for support point-to-multipoint ,see rfc2328 |
| 12.4.1.4.*/ |
| /* from "edward rrr" <edward_rrr@hotmail.com> |
| http://marc.theaimsgroup.com/?l=zebra&m=100739222210507&w=2 */ |
| int |
| lsa_link_ptomp_set (struct stream *s, struct ospf_interface *oi) |
| { |
| int links = 0; |
| struct route_node *rn; |
| struct ospf_neighbor *nbr = NULL; |
| struct in_addr id, mask; |
| |
| mask.s_addr = 0xffffffff; |
| id.s_addr = oi->address->u.prefix4.s_addr; |
| link_info_set (s, id, mask, LSA_LINK_TYPE_STUB, 0, 0); |
| links++; |
| |
| zlog_info ("PointToMultipoint: running ptomultip_set"); |
| |
| /* Search neighbor, */ |
| for (rn = route_top (oi->nbrs); rn; rn = route_next (rn)) |
| if ((nbr = rn->info) != NULL) |
| /* Ignore myself. */ |
| if (!IPV4_ADDR_SAME (&nbr->router_id, &oi->ospf->router_id)) |
| if (nbr->state == NSM_Full) |
| |
| { |
| link_info_set (s, nbr->router_id, oi->address->u.prefix4, |
| LSA_LINK_TYPE_POINTOPOINT, 0, oi->output_cost); |
| links++; |
| zlog_info ("PointToMultipoint: set link to %s", |
| inet_ntoa(oi->address->u.prefix4)); |
| } |
| |
| return links; |
| } |
| |
| /* Set router-LSA link information. */ |
| int |
| router_lsa_link_set (struct stream *s, struct ospf_area *area) |
| { |
| listnode node; |
| int links = 0; |
| |
| for (node = listhead (area->oiflist); node; node = nextnode (node)) |
| { |
| struct ospf_interface *oi = node->data; |
| struct interface *ifp = oi->ifp; |
| |
| /* Check interface is up, OSPF is enable. */ |
| if (if_is_operative (ifp)) |
| { |
| if (oi->state != ISM_Down) |
| { |
| /* Describe each link. */ |
| switch (oi->type) |
| { |
| case OSPF_IFTYPE_POINTOPOINT: |
| links += lsa_link_ptop_set (s, oi); |
| break; |
| case OSPF_IFTYPE_BROADCAST: |
| links += lsa_link_broadcast_set (s, oi); |
| break; |
| case OSPF_IFTYPE_NBMA: |
| links += lsa_link_nbma_set (s, oi); |
| break; |
| case OSPF_IFTYPE_POINTOMULTIPOINT: |
| links += lsa_link_ptomp_set (s, oi); |
| break; |
| case OSPF_IFTYPE_VIRTUALLINK: |
| links += lsa_link_virtuallink_set (s, oi); |
| break; |
| case OSPF_IFTYPE_LOOPBACK: |
| links += lsa_link_loopback_set (s, oi); |
| } |
| } |
| } |
| } |
| |
| return links; |
| } |
| |
| /* Set router-LSA body. */ |
| void |
| ospf_router_lsa_body_set (struct stream *s, struct ospf_area *area) |
| { |
| unsigned long putp; |
| u_int16_t cnt; |
| |
| /* Set flags. */ |
| stream_putc (s, router_lsa_flags (area)); |
| |
| /* Set Zero fields. */ |
| stream_putc (s, 0); |
| |
| /* Keep pointer to # links. */ |
| putp = s->putp; |
| |
| /* Forward word */ |
| stream_putw(s, 0); |
| |
| /* Set all link information. */ |
| cnt = router_lsa_link_set (s, area); |
| |
| /* Set # of links here. */ |
| stream_putw_at (s, putp, cnt); |
| } |
| |
| /* Create new router-LSA. */ |
| struct ospf_lsa * |
| ospf_router_lsa_new (struct ospf_area *area) |
| { |
| struct ospf *ospf = area->ospf; |
| struct stream *s; |
| struct lsa_header *lsah; |
| struct ospf_lsa *new; |
| int length; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type1]: Create router-LSA instance"); |
| |
| /* Create a stream for LSA. */ |
| s = stream_new (OSPF_MAX_LSA_SIZE); |
| lsah = (struct lsa_header *) STREAM_DATA (s); |
| |
| #ifdef HAVE_NSSA |
| /* Set LSA common header fields. */ |
| lsa_header_set (s, LSA_OPTIONS_GET (area) | LSA_NSSA_GET (area), |
| OSPF_ROUTER_LSA, ospf->router_id, ospf->router_id); |
| #else /* ! HAVE_NSSA */ |
| /* Set LSA common header fields. */ |
| lsa_header_set (s, LSA_OPTIONS_GET (area), |
| OSPF_ROUTER_LSA, ospf->router_id, ospf->router_id); |
| #endif /* HAVE_NSSA */ |
| |
| /* Set router-LSA body fields. */ |
| ospf_router_lsa_body_set (s, area); |
| |
| /* Set length. */ |
| length = stream_get_endp (s); |
| lsah->length = htons (length); |
| |
| /* Now, create OSPF LSA instance. */ |
| new = ospf_lsa_new (); |
| new->area = area; |
| SET_FLAG (new->flags, OSPF_LSA_SELF); |
| |
| /* Copy LSA data to store, discard stream. */ |
| new->data = ospf_lsa_data_new (length); |
| memcpy (new->data, lsah, length); |
| stream_free (s); |
| |
| return new; |
| } |
| |
| /* Originate Router-LSA. */ |
| struct ospf_lsa * |
| ospf_router_lsa_originate (struct ospf_area *area) |
| { |
| struct ospf_lsa *new; |
| |
| /* Create new router-LSA instance. */ |
| new = ospf_router_lsa_new (area); |
| |
| /* Sanity check. */ |
| if (new->data->adv_router.s_addr == 0) |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("LSA[Type1]: AdvRouter is 0, discard"); |
| ospf_lsa_discard (new); |
| return NULL; |
| } |
| |
| /* Install LSA to LSDB. */ |
| new = ospf_lsa_install (area->ospf, NULL, new); |
| |
| /* Update LSA origination count. */ |
| area->ospf->lsa_originate_count++; |
| |
| /* Flooding new LSA through area. */ |
| ospf_flood_through_area (area, NULL, new); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: Originate router-LSA %p", |
| new->data->type, inet_ntoa (new->data->id), new); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return new; |
| } |
| |
| /* Refresh router-LSA. */ |
| struct ospf_lsa * |
| ospf_router_lsa_refresh (struct ospf_lsa *lsa) |
| { |
| struct ospf_area *area = lsa->area; |
| struct ospf_lsa *new; |
| |
| /* Sanity check. */ |
| assert (lsa->data); |
| |
| /* Delete LSA from neighbor retransmit-list. */ |
| ospf_ls_retransmit_delete_nbr_area (area, lsa); |
| |
| /* Create new router-LSA instance. */ |
| new = ospf_router_lsa_new (area); |
| new->data->ls_seqnum = lsa_seqnum_increment (lsa); |
| |
| ospf_lsa_install (area->ospf, NULL, new); |
| |
| /* Flood LSA through area. */ |
| ospf_flood_through_area (area, NULL, new); |
| |
| /* Debug logging. */ |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: router-LSA refresh", |
| new->data->type, inet_ntoa (new->data->id)); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return NULL; |
| } |
| |
| int |
| ospf_router_lsa_timer (struct thread *t) |
| { |
| struct ospf_area *area; |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("Timer[router-LSA]: (router-LSA Refresh expire)"); |
| |
| area = THREAD_ARG (t); |
| area->t_router_lsa_self = NULL; |
| |
| /* Now refresh router-LSA. */ |
| if (area->router_lsa_self) |
| ospf_router_lsa_refresh (area->router_lsa_self); |
| /* Newly originate router-LSA. */ |
| else |
| ospf_router_lsa_originate (area); |
| |
| return 0; |
| } |
| |
| void |
| ospf_router_lsa_timer_add (struct ospf_area *area) |
| { |
| /* Keep area's self-originated router-LSA. */ |
| struct ospf_lsa *lsa = area->router_lsa_self; |
| |
| /* Cancel previously scheduled router-LSA timer. */ |
| if (area->t_router_lsa_self) |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type1]: Cancel previous router-LSA timer"); |
| |
| OSPF_TIMER_OFF (area->t_router_lsa_self); |
| |
| /* If router-LSA is originated previously, check the interval time. */ |
| if (lsa) |
| { |
| int delay; |
| if ((delay = ospf_lsa_refresh_delay (lsa)) > 0) |
| { |
| OSPF_AREA_TIMER_ON (area->t_router_lsa_self, |
| ospf_router_lsa_timer, delay); |
| return; |
| } |
| } |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type1]: Scheduling router-LSA origination right away"); |
| |
| /* Immediately refresh router-LSA. */ |
| OSPF_AREA_TIMER_ON (area->t_router_lsa_self, ospf_router_lsa_timer, 0); |
| } |
| |
| int |
| ospf_router_lsa_update_timer (struct thread *thread) |
| { |
| struct ospf *ospf = THREAD_ARG (thread); |
| listnode node; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("Timer[router-LSA Update]: (timer expire)"); |
| |
| ospf->t_router_lsa_update = NULL; |
| |
| for (node = listhead (ospf->areas); node; nextnode (node)) |
| { |
| struct ospf_area *area = getdata (node); |
| struct ospf_lsa *lsa = area->router_lsa_self; |
| struct router_lsa *rl; |
| char *area_str; |
| |
| /* Keep Area ID string. */ |
| area_str = AREA_NAME (area); |
| |
| /* If LSA not exist in this Area, originate new. */ |
| if (lsa == NULL) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info("LSA[Type1]: Create router-LSA for Area %s", area_str); |
| |
| ospf_router_lsa_originate (area); |
| } |
| /* If router-ID is changed, Link ID must change. |
| First flush old LSA, then originate new. */ |
| else if (!IPV4_ADDR_SAME (&lsa->data->id, &ospf->router_id)) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info("LSA[Type%d:%s]: Refresh router-LSA for Area %s", |
| lsa->data->type, inet_ntoa (lsa->data->id), area_str); |
| ospf_lsa_flush_area (lsa, area); |
| ospf_lsa_unlock (area->router_lsa_self); |
| area->router_lsa_self = NULL; |
| |
| /* Refresh router-LSA, (not install) and flood through area. */ |
| ospf_router_lsa_timer_add (area); |
| } |
| else |
| { |
| rl = (struct router_lsa *) lsa->data; |
| /* Refresh router-LSA, (not install) and flood through area. */ |
| if (rl->flags != ospf->flags) |
| ospf_router_lsa_timer_add (area); |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| /* network-LSA related functions. */ |
| /* Originate Network-LSA. */ |
| void |
| ospf_network_lsa_body_set (struct stream *s, struct ospf_interface *oi) |
| { |
| struct in_addr mask; |
| struct route_node *rn; |
| struct ospf_neighbor *nbr; |
| |
| masklen2ip (oi->address->prefixlen, &mask); |
| stream_put_ipv4 (s, mask.s_addr); |
| |
| /* The network-LSA lists those routers that are fully adjacent to |
| the Designated Router; each fully adjacent router is identified by |
| its OSPF Router ID. The Designated Router includes itself in this |
| list. RFC2328, Section 12.4.2 */ |
| |
| for (rn = route_top (oi->nbrs); rn; rn = route_next (rn)) |
| if ((nbr = rn->info) != NULL) |
| if (nbr->state == NSM_Full || nbr == oi->nbr_self) |
| stream_put_ipv4 (s, nbr->router_id.s_addr); |
| } |
| |
| struct ospf_lsa * |
| ospf_network_lsa_new (struct ospf_interface *oi) |
| { |
| struct stream *s; |
| struct ospf_lsa *new; |
| struct lsa_header *lsah; |
| int length; |
| |
| /* If there are no neighbours on this network (the net is stub), |
| the router does not originate network-LSA (see RFC 12.4.2) */ |
| if (oi->full_nbrs == 0) |
| return NULL; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type2]: Create network-LSA instance"); |
| |
| /* Create new stream for LSA. */ |
| s = stream_new (OSPF_MAX_LSA_SIZE); |
| lsah = (struct lsa_header *) STREAM_DATA (s); |
| |
| lsa_header_set (s, (OPTIONS (oi) | LSA_OPTIONS_GET (oi->area)), |
| OSPF_NETWORK_LSA, DR (oi), oi->ospf->router_id); |
| |
| /* Set network-LSA body fields. */ |
| ospf_network_lsa_body_set (s, oi); |
| |
| /* Set length. */ |
| length = stream_get_endp (s); |
| lsah->length = htons (length); |
| |
| /* Create OSPF LSA instance. */ |
| new = ospf_lsa_new (); |
| new->area = oi->area; |
| SET_FLAG (new->flags, OSPF_LSA_SELF); |
| |
| /* Copy LSA to store. */ |
| new->data = ospf_lsa_data_new (length); |
| memcpy (new->data, lsah, length); |
| stream_free (s); |
| |
| return new; |
| } |
| |
| /* Originate network-LSA. */ |
| struct ospf_lsa * |
| ospf_network_lsa_originate (struct ospf_interface *oi) |
| { |
| struct ospf_lsa *new; |
| |
| /* Create new network-LSA instance. */ |
| new = ospf_network_lsa_new (oi); |
| if (new == NULL) |
| return NULL; |
| |
| /* Install LSA to LSDB. */ |
| new = ospf_lsa_install (oi->ospf, oi, new); |
| |
| /* Update LSA origination count. */ |
| oi->ospf->lsa_originate_count++; |
| |
| /* Flooding new LSA through area. */ |
| ospf_flood_through_area (oi->area, NULL, new); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: Originate network-LSA %p", |
| new->data->type, inet_ntoa (new->data->id), new); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return new; |
| } |
| |
| int |
| ospf_network_lsa_refresh (struct ospf_lsa *lsa, struct ospf_interface *oi) |
| { |
| struct ospf_area *area = lsa->area; |
| struct ospf_lsa *new; |
| |
| assert (lsa->data); |
| |
| /* Delete LSA from neighbor retransmit-list. */ |
| ospf_ls_retransmit_delete_nbr_area (area, lsa); |
| |
| /* Create new network-LSA instance. */ |
| new = ospf_network_lsa_new (oi); |
| if (new == NULL) |
| return -1; |
| new->data->ls_seqnum = lsa_seqnum_increment (lsa); |
| |
| ospf_lsa_install (area->ospf, oi, new); |
| |
| /* Flood LSA through aera. */ |
| ospf_flood_through_area (area, NULL, new); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: network-LSA refresh", |
| new->data->type, inet_ntoa (new->data->id)); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return 0; |
| } |
| |
| int |
| ospf_network_lsa_refresh_timer (struct thread *t) |
| { |
| struct ospf_interface *oi; |
| |
| oi = THREAD_ARG (t); |
| oi->t_network_lsa_self = NULL; |
| |
| if (oi->network_lsa_self) |
| /* Now refresh network-LSA. */ |
| ospf_network_lsa_refresh (oi->network_lsa_self, oi); |
| else |
| /* Newly create network-LSA. */ |
| ospf_network_lsa_originate (oi); |
| |
| return 0; |
| } |
| |
| void |
| ospf_network_lsa_timer_add (struct ospf_interface *oi) |
| { |
| /* Keep interface's self-originated network-LSA. */ |
| struct ospf_lsa *lsa = oi->network_lsa_self; |
| |
| /* Cancel previously schedules network-LSA timer. */ |
| if (oi->t_network_lsa_self) |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type2]: Cancel previous network-LSA timer"); |
| OSPF_TIMER_OFF (oi->t_network_lsa_self); |
| |
| /* If network-LSA is originated previously, check the interval time. */ |
| if (lsa) |
| { |
| int delay; |
| if ((delay = ospf_lsa_refresh_delay (lsa)) > 0) |
| { |
| oi->t_network_lsa_self = |
| thread_add_timer (master, ospf_network_lsa_refresh_timer, |
| oi, delay); |
| return; |
| } |
| } |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("Scheduling network-LSA origination right away"); |
| |
| /* Immediately refresh network-LSA. */ |
| oi->t_network_lsa_self = |
| thread_add_event (master, ospf_network_lsa_refresh_timer, oi, 0); |
| } |
| |
| |
| void |
| stream_put_ospf_metric (struct stream *s, u_int32_t metric_value) |
| { |
| u_int32_t metric; |
| char *mp; |
| |
| /* Put 0 metric. TOS metric is not supported. */ |
| metric = htonl (metric_value); |
| mp = (char *) &metric; |
| mp++; |
| stream_put (s, mp, 3); |
| } |
| |
| /* summary-LSA related functions. */ |
| void |
| ospf_summary_lsa_body_set (struct stream *s, struct prefix *p, |
| u_int32_t metric) |
| { |
| struct in_addr mask; |
| |
| masklen2ip (p->prefixlen, &mask); |
| |
| /* Put Network Mask. */ |
| stream_put_ipv4 (s, mask.s_addr); |
| |
| /* Set # TOS. */ |
| stream_putc (s, (u_char) 0); |
| |
| /* Set metric. */ |
| stream_put_ospf_metric (s, metric); |
| } |
| |
| struct ospf_lsa * |
| ospf_summary_lsa_new (struct ospf_area *area, struct prefix *p, |
| u_int32_t metric, struct in_addr id) |
| { |
| struct stream *s; |
| struct ospf_lsa *new; |
| struct lsa_header *lsah; |
| int length; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type3]: Create summary-LSA instance"); |
| |
| /* Create new stream for LSA. */ |
| s = stream_new (OSPF_MAX_LSA_SIZE); |
| lsah = (struct lsa_header *) STREAM_DATA (s); |
| |
| lsa_header_set (s, LSA_OPTIONS_GET (area), OSPF_SUMMARY_LSA, |
| id, area->ospf->router_id); |
| |
| /* Set summary-LSA body fields. */ |
| ospf_summary_lsa_body_set (s, p, metric); |
| |
| /* Set length. */ |
| length = stream_get_endp (s); |
| lsah->length = htons (length); |
| |
| /* Create OSPF LSA instance. */ |
| new = ospf_lsa_new (); |
| new->area = area; |
| SET_FLAG (new->flags, OSPF_LSA_SELF); |
| |
| /* Copy LSA to store. */ |
| new->data = ospf_lsa_data_new (length); |
| memcpy (new->data, lsah, length); |
| stream_free (s); |
| |
| return new; |
| } |
| |
| /* Originate Summary-LSA. */ |
| struct ospf_lsa * |
| ospf_summary_lsa_originate (struct prefix_ipv4 *p, u_int32_t metric, |
| struct ospf_area *area) |
| { |
| struct ospf_lsa *new; |
| struct in_addr id; |
| |
| id = ospf_lsa_unique_id (area->ospf, area->lsdb, OSPF_SUMMARY_LSA, p); |
| |
| /* Create new summary-LSA instance. */ |
| new = ospf_summary_lsa_new (area, (struct prefix *) p, metric, id); |
| |
| /* Instlal LSA to LSDB. */ |
| new = ospf_lsa_install (area->ospf, NULL, new); |
| |
| /* Update LSA origination count. */ |
| area->ospf->lsa_originate_count++; |
| |
| /* Flooding new LSA through area. */ |
| ospf_flood_through_area (area, NULL, new); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: Originate summary-LSA %p", |
| new->data->type, inet_ntoa (new->data->id), new); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return new; |
| } |
| |
| struct ospf_lsa* |
| ospf_summary_lsa_refresh (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| struct ospf_lsa *new; |
| struct summary_lsa *sl; |
| struct prefix p; |
| |
| /* Sanity check. */ |
| assert (lsa->data); |
| |
| sl = (struct summary_lsa *)lsa->data; |
| p.prefixlen = ip_masklen (sl->mask); |
| new = ospf_summary_lsa_new (lsa->area, &p, GET_METRIC (sl->metric), |
| sl->header.id); |
| |
| new->data->ls_seqnum = lsa_seqnum_increment (lsa); |
| |
| /* Re-calculate checksum. */ |
| ospf_lsa_checksum (new->data); |
| |
| ospf_lsa_install (ospf, NULL, new); |
| |
| /* Flood LSA through AS. */ |
| ospf_flood_through_area (new->area, NULL, new); |
| |
| /* Debug logging. */ |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: summary-LSA refresh", |
| new->data->type, inet_ntoa (new->data->id)); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return new; |
| } |
| |
| |
| /* summary-ASBR-LSA related functions. */ |
| void |
| ospf_summary_asbr_lsa_body_set (struct stream *s, struct prefix *p, |
| u_int32_t metric) |
| { |
| struct in_addr mask; |
| |
| masklen2ip (p->prefixlen, &mask); |
| |
| /* Put Network Mask. */ |
| stream_put_ipv4 (s, mask.s_addr); |
| |
| /* Set # TOS. */ |
| stream_putc (s, (u_char) 0); |
| |
| /* Set metric. */ |
| stream_put_ospf_metric (s, metric); |
| } |
| |
| struct ospf_lsa * |
| ospf_summary_asbr_lsa_new (struct ospf_area *area, struct prefix *p, |
| u_int32_t metric, struct in_addr id) |
| { |
| struct stream *s; |
| struct ospf_lsa *new; |
| struct lsa_header *lsah; |
| int length; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type3]: Create summary-LSA instance"); |
| |
| /* Create new stream for LSA. */ |
| s = stream_new (OSPF_MAX_LSA_SIZE); |
| lsah = (struct lsa_header *) STREAM_DATA (s); |
| |
| lsa_header_set (s, LSA_OPTIONS_GET (area), OSPF_ASBR_SUMMARY_LSA, |
| id, area->ospf->router_id); |
| |
| /* Set summary-LSA body fields. */ |
| ospf_summary_asbr_lsa_body_set (s, p, metric); |
| |
| /* Set length. */ |
| length = stream_get_endp (s); |
| lsah->length = htons (length); |
| |
| /* Create OSPF LSA instance. */ |
| new = ospf_lsa_new (); |
| new->area = area; |
| SET_FLAG (new->flags, OSPF_LSA_SELF); |
| |
| /* Copy LSA to store. */ |
| new->data = ospf_lsa_data_new (length); |
| memcpy (new->data, lsah, length); |
| stream_free (s); |
| |
| return new; |
| } |
| |
| /* Originate summary-ASBR-LSA. */ |
| struct ospf_lsa * |
| ospf_summary_asbr_lsa_originate (struct prefix_ipv4 *p, u_int32_t metric, |
| struct ospf_area *area) |
| { |
| struct ospf_lsa *new; |
| struct in_addr id; |
| |
| id = ospf_lsa_unique_id (area->ospf, area->lsdb, OSPF_ASBR_SUMMARY_LSA, p); |
| |
| /* Create new summary-LSA instance. */ |
| new = ospf_summary_asbr_lsa_new (area, (struct prefix *) p, metric, id); |
| |
| /* Install LSA to LSDB. */ |
| new = ospf_lsa_install (area->ospf, NULL, new); |
| |
| /* Update LSA origination count. */ |
| area->ospf->lsa_originate_count++; |
| |
| /* Flooding new LSA through area. */ |
| ospf_flood_through_area (area, NULL, new); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: Originate summary-ASBR-LSA %p", |
| new->data->type, inet_ntoa (new->data->id), new); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return new; |
| } |
| |
| struct ospf_lsa* |
| ospf_summary_asbr_lsa_refresh (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| struct ospf_lsa *new; |
| struct summary_lsa *sl; |
| struct prefix p; |
| |
| /* Sanity check. */ |
| assert (lsa->data); |
| |
| sl = (struct summary_lsa *)lsa->data; |
| p.prefixlen = ip_masklen (sl->mask); |
| new = ospf_summary_asbr_lsa_new (lsa->area, &p, GET_METRIC (sl->metric), |
| sl->header.id); |
| |
| new->data->ls_seqnum = lsa_seqnum_increment (lsa); |
| |
| /* Re-calculate checksum. */ |
| ospf_lsa_checksum (new->data); |
| |
| ospf_lsa_install (ospf, NULL, new); |
| |
| /* Flood LSA through area. */ |
| ospf_flood_through_area (new->area, NULL, new); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: summary-ASBR-LSA refresh", |
| new->data->type, inet_ntoa (new->data->id)); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return new; |
| } |
| |
| /* AS-external-LSA related functions. */ |
| |
| /* Get nexthop for AS-external-LSAs. Return nexthop if its interface |
| is connected, else 0*/ |
| struct in_addr |
| ospf_external_lsa_nexthop_get (struct ospf *ospf, struct in_addr nexthop) |
| { |
| struct in_addr fwd; |
| struct prefix nh; |
| listnode n1; |
| |
| fwd.s_addr = 0; |
| |
| if (!nexthop.s_addr) |
| return fwd; |
| |
| /* Check whether nexthop is covered by OSPF network. */ |
| nh.family = AF_INET; |
| nh.u.prefix4 = nexthop; |
| nh.prefixlen = IPV4_MAX_BITLEN; |
| |
| for (n1 = listhead (ospf->oiflist); n1; nextnode (n1)) |
| { |
| struct ospf_interface *oi = getdata (n1); |
| |
| if (if_is_operative (oi->ifp)) |
| if (oi->address->family == AF_INET) |
| if (prefix_match (oi->address, &nh)) |
| return nexthop; |
| } |
| |
| return fwd; |
| } |
| |
| #ifdef HAVE_NSSA |
| /* NSSA-external-LSA related functions. */ |
| |
| /* Get 1st IP connection for Forward Addr */ |
| |
| struct in_addr |
| ospf_get_ip_from_ifp (struct ospf_interface *oi) |
| { |
| struct in_addr fwd; |
| |
| fwd.s_addr = 0; |
| |
| if (if_is_operative (oi->ifp)) |
| return oi->address->u.prefix4; |
| |
| return fwd; |
| } |
| |
| /* Get 1st IP connection for Forward Addr */ |
| struct in_addr |
| ospf_get_nssa_ip (struct ospf_area *area) |
| { |
| struct in_addr fwd; |
| struct in_addr best_default; |
| listnode n1; |
| |
| fwd.s_addr = 0; |
| best_default.s_addr = 0; |
| |
| for (n1 = listhead (area->ospf->oiflist); n1; nextnode (n1)) |
| { |
| struct ospf_interface *oi = getdata (n1); |
| |
| if (if_is_operative (oi->ifp)) |
| if (oi->area->external_routing == OSPF_AREA_NSSA) |
| if (oi->address && oi->address->family == AF_INET) |
| { |
| if (best_default.s_addr == 0) |
| best_default = oi->address->u.prefix4; |
| if (oi->area == area) |
| return oi->address->u.prefix4; |
| } |
| } |
| if (best_default.s_addr != 0) |
| return best_default; |
| |
| if (best_default.s_addr != 0) |
| return best_default; |
| |
| return fwd; |
| } |
| #endif /* HAVE_NSSA */ |
| |
| #define DEFAULT_DEFAULT_METRIC 20 |
| #define DEFAULT_DEFAULT_ORIGINATE_METRIC 10 |
| #define DEFAULT_DEFAULT_ALWAYS_METRIC 1 |
| |
| #define DEFAULT_METRIC_TYPE EXTERNAL_METRIC_TYPE_2 |
| |
| int |
| metric_type (struct ospf *ospf, u_char src) |
| { |
| return (ospf->dmetric[src].type < 0 ? |
| DEFAULT_METRIC_TYPE : ospf->dmetric[src].type); |
| } |
| |
| int |
| metric_value (struct ospf *ospf, u_char src) |
| { |
| if (ospf->dmetric[src].value < 0) |
| { |
| if (src == DEFAULT_ROUTE) |
| { |
| if (ospf->default_originate == DEFAULT_ORIGINATE_ZEBRA) |
| return DEFAULT_DEFAULT_ORIGINATE_METRIC; |
| else |
| return DEFAULT_DEFAULT_ALWAYS_METRIC; |
| } |
| else if (ospf->default_metric < 0) |
| return DEFAULT_DEFAULT_METRIC; |
| else |
| return ospf->default_metric; |
| } |
| |
| return ospf->dmetric[src].value; |
| } |
| |
| /* Set AS-external-LSA body. */ |
| void |
| ospf_external_lsa_body_set (struct stream *s, struct external_info *ei, |
| struct ospf *ospf) |
| { |
| struct prefix_ipv4 *p = &ei->p; |
| struct in_addr mask, fwd_addr; |
| u_int32_t mvalue; |
| int mtype; |
| int type; |
| |
| /* Put Network Mask. */ |
| masklen2ip (p->prefixlen, &mask); |
| stream_put_ipv4 (s, mask.s_addr); |
| |
| /* If prefix is default, specify DEFAULT_ROUTE. */ |
| type = is_prefix_default (&ei->p) ? DEFAULT_ROUTE : ei->type; |
| |
| mtype = (ROUTEMAP_METRIC_TYPE (ei) != -1) ? |
| ROUTEMAP_METRIC_TYPE (ei) : metric_type (ospf, type); |
| |
| mvalue = (ROUTEMAP_METRIC (ei) != -1) ? |
| ROUTEMAP_METRIC (ei) : metric_value (ospf, type); |
| |
| /* Put type of external metric. */ |
| stream_putc (s, (mtype == EXTERNAL_METRIC_TYPE_2 ? 0x80 : 0)); |
| |
| /* Put 0 metric. TOS metric is not supported. */ |
| stream_put_ospf_metric (s, mvalue); |
| |
| /* Get forwarding address to nexthop if on the Connection List, else 0. */ |
| fwd_addr = ospf_external_lsa_nexthop_get (ospf, ei->nexthop); |
| |
| /* Put forwarding address. */ |
| stream_put_ipv4 (s, fwd_addr.s_addr); |
| |
| /* Put route tag -- This value should be introduced from configuration. */ |
| stream_putl (s, 0); |
| } |
| |
| /* Create new external-LSA. */ |
| struct ospf_lsa * |
| ospf_external_lsa_new (struct ospf *ospf, |
| struct external_info *ei, struct in_addr *old_id) |
| { |
| struct stream *s; |
| struct lsa_header *lsah; |
| struct ospf_lsa *new; |
| struct in_addr id; |
| int length; |
| |
| if (ei == NULL) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_warn ("LSA[Type5]: External info is NULL, could not originated"); |
| return NULL; |
| } |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type5]: Originate AS-external-LSA instance"); |
| |
| /* If old Link State ID is specified, refresh LSA with same ID. */ |
| if (old_id) |
| id = *old_id; |
| /* Get Link State with unique ID. */ |
| else |
| { |
| id = ospf_lsa_unique_id (ospf, ospf->lsdb, OSPF_AS_EXTERNAL_LSA, &ei->p); |
| if (id.s_addr == 0xffffffff) |
| { |
| /* Maybe Link State ID not available. */ |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type5]: Link ID not available, can't originate"); |
| return NULL; |
| } |
| } |
| |
| /* Create new stream for LSA. */ |
| s = stream_new (OSPF_MAX_LSA_SIZE); |
| lsah = (struct lsa_header *) STREAM_DATA (s); |
| |
| /* Set LSA common header fields. */ |
| lsa_header_set (s, OSPF_OPTION_E, OSPF_AS_EXTERNAL_LSA, |
| id, ospf->router_id); |
| |
| /* Set AS-external-LSA body fields. */ |
| ospf_external_lsa_body_set (s, ei, ospf); |
| |
| /* Set length. */ |
| length = stream_get_endp (s); |
| lsah->length = htons (length); |
| |
| /* Now, create OSPF LSA instance. */ |
| new = ospf_lsa_new (); |
| new->area = NULL; |
| SET_FLAG (new->flags, OSPF_LSA_SELF|OSPF_LSA_APPROVED); |
| |
| /* Copy LSA data to store, discard stream. */ |
| new->data = ospf_lsa_data_new (length); |
| memcpy (new->data, lsah, length); |
| stream_free (s); |
| |
| return new; |
| } |
| |
| #ifdef HAVE_NSSA |
| /* As Type-7 */ |
| void |
| ospf_install_flood_nssa (struct ospf *ospf, |
| struct ospf_lsa *lsa, struct external_info *ei) |
| { |
| struct ospf_lsa *new2; |
| struct as_external_lsa *extlsa; |
| listnode node; |
| |
| /* NSSA Originate or Refresh (If anyNSSA) |
| |
| LSA is self-originated. And just installed as Type-5. |
| Additionally, install as Type-7 LSDB for every attached NSSA. |
| |
| P-Bit controls which ABR performs translation to outside world; If |
| we are an ABR....do not set the P-bit, because we send the Type-5, |
| not as the ABR Translator, but as the ASBR owner within the AS! |
| |
| If we are NOT ABR, Flood through NSSA as Type-7 w/P-bit set. The |
| elected ABR Translator will see the P-bit, Translate, and re-flood. |
| |
| Later, ABR_TASK and P-bit will scan Type-7 LSDB and translate to |
| Type-5's to non-NSSA Areas. (it will also attempt a re-install) */ |
| |
| for (node = listhead (ospf->areas); node; nextnode (node)) |
| { |
| struct ospf_area *area = getdata (node); |
| |
| /* make lsa duplicate, lock=1 */ |
| new2 = ospf_lsa_dup (lsa); |
| new2->area = area; |
| new2->data->type = OSPF_AS_NSSA_LSA; |
| |
| /* set P-bit if not ABR */ |
| if (! OSPF_IS_ABR) |
| { |
| SET_FLAG(new2->data->options, OSPF_OPTION_NP); |
| |
| /* set non-zero FWD ADDR |
| |
| draft-ietf-ospf-nssa-update-09.txt |
| |
| if the network between the NSSA AS boundary router and the |
| adjacent AS is advertised into OSPF as an internal OSPF route, |
| the forwarding address should be the next op address as is cu |
| currently done with type-5 LSAs. If the intervening network is |
| not adversited into OSPF as an internal OSPF route and the |
| type-7 LSA's P-bit is set a forwarding address should be |
| selected from one of the router's active OSPF inteface addresses |
| which belong to the NSSA. If no such addresses exist, then |
| no type-7 LSA's with the P-bit set should originate from this |
| router. */ |
| |
| /* kevinm: not updating lsa anymore, just new2 */ |
| extlsa = (struct as_external_lsa *)(new2->data); |
| |
| if (extlsa->e[0].fwd_addr.s_addr == 0) |
| extlsa->e[0].fwd_addr = ospf_get_nssa_ip(area); /* this NSSA area in ifp */ |
| |
| if (IS_DEBUG_OSPF_NSSA) |
| if (extlsa->e[0].fwd_addr.s_addr == 0) |
| { |
| zlog_info ("LSA[Type-7]: Could not build FWD-ADDR"); |
| ospf_lsa_discard(new2); |
| return; |
| } |
| } |
| /* Re-calculate checksum. */ |
| ospf_lsa_checksum (new2->data); |
| |
| /* install also as Type-7 */ |
| ospf_lsa_install (ospf, NULL, new2); /* Remove Old, Lock New = 2 */ |
| |
| /* will send each copy, lock=2+n */ |
| ospf_flood_through_as (ospf, NULL, new2); /* all attached NSSA's, no AS/STUBs */ |
| } |
| } |
| #endif /* HAVE_NSSA */ |
| |
| int |
| is_prefix_default (struct prefix_ipv4 *p) |
| { |
| struct prefix_ipv4 q; |
| |
| q.family = AF_INET; |
| q.prefix.s_addr = 0; |
| q.prefixlen = 0; |
| |
| return prefix_same ((struct prefix *) p, (struct prefix *) &q); |
| } |
| |
| /* Originate an AS-external-LSA, install and flood. */ |
| struct ospf_lsa * |
| ospf_external_lsa_originate (struct ospf *ospf, struct external_info *ei) |
| { |
| struct ospf_lsa *new; |
| |
| /* Added for NSSA project.... |
| |
| External LSAs are originated in ASBRs as usual, but for NSSA systems. |
| there is the global Type-5 LSDB and a Type-7 LSDB installed for |
| every area. The Type-7's are flooded to every IR and every ABR; We |
| install the Type-5 LSDB so that the normal "refresh" code operates |
| as usual, and flag them as not used during ASE calculations. The |
| Type-7 LSDB is used for calculations. Each Type-7 has a Forwarding |
| Address of non-zero. |
| |
| If an ABR is the elected NSSA translator, following SPF and during |
| the ABR task it will translate all the scanned Type-7's, with P-bit |
| ON and not-self generated, and translate to Type-5's throughout the |
| non-NSSA/STUB AS. |
| |
| A difference in operation depends whether this ASBR is an ABR |
| or not. If not an ABR, the P-bit is ON, to indicate that any |
| elected NSSA-ABR can perform its translation. |
| |
| If an ABR, the P-bit is OFF; No ABR will perform translation and |
| this ASBR will flood the Type-5 LSA as usual. |
| |
| For the case where this ASBR is not an ABR, the ASE calculations |
| are based on the Type-5 LSDB; The Type-7 LSDB exists just to |
| demonstrate to the user that there are LSA's that belong to any |
| attached NSSA. |
| |
| Finally, it just so happens that when the ABR is translating every |
| Type-7 into Type-5, it installs it into the Type-5 LSDB as an |
| approved Type-5 (translated from Type-7); at the end of translation |
| if any Translated Type-5's remain unapproved, then they must be |
| flushed from the AS. |
| |
| */ |
| |
| /* Check the AS-external-LSA should be originated. */ |
| if (!ospf_redistribute_check (ospf, ei, NULL)) |
| return NULL; |
| |
| /* Create new AS-external-LSA instance. */ |
| if ((new = ospf_external_lsa_new (ospf, ei, NULL)) == NULL) |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("LSA[Type5:%s]: Could not originate AS-external-LSA", |
| inet_ntoa (ei->p.prefix)); |
| return NULL; |
| } |
| |
| /* Install newly created LSA into Type-5 LSDB, lock = 1. */ |
| ospf_lsa_install (ospf, NULL, new); |
| |
| /* Update LSA origination count. */ |
| ospf->lsa_originate_count++; |
| |
| /* Flooding new LSA. only to AS (non-NSSA/STUB) */ |
| ospf_flood_through_as (ospf, NULL, new); |
| |
| #ifdef HAVE_NSSA |
| /* If there is any attached NSSA, do special handling */ |
| if (ospf->anyNSSA) |
| ospf_install_flood_nssa (ospf, new, ei); /* Install/Flood Type-7 to all NSSAs */ |
| #endif /* HAVE_NSSA */ |
| |
| /* Debug logging. */ |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: Originate AS-external-LSA %p", |
| new->data->type, inet_ntoa (new->data->id), new); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return new; |
| } |
| |
| /* Originate AS-external-LSA from external info with initial flag. */ |
| int |
| ospf_external_lsa_originate_timer (struct thread *thread) |
| { |
| struct ospf *ospf = THREAD_ARG (thread); |
| struct route_node *rn; |
| struct external_info *ei; |
| struct route_table *rt; |
| int type = THREAD_VAL (thread); |
| |
| ospf->t_external_lsa = NULL; |
| |
| /* Originate As-external-LSA from all type of distribute source. */ |
| if ((rt = EXTERNAL_INFO (type))) |
| for (rn = route_top (rt); rn; rn = route_next (rn)) |
| if ((ei = rn->info) != NULL) |
| if (!is_prefix_default ((struct prefix_ipv4 *)&ei->p)) |
| if (!ospf_external_lsa_originate (ospf, ei)) |
| zlog_warn ("LSA: AS-external-LSA was not originated."); |
| |
| return 0; |
| } |
| |
| struct external_info * |
| ospf_default_external_info () |
| { |
| int type; |
| struct route_node *rn; |
| struct prefix_ipv4 p; |
| struct ospf *ospf = ospf_top; |
| |
| p.family = AF_INET; |
| p.prefix.s_addr = 0; |
| p.prefixlen = 0; |
| |
| /* First, lookup redistributed default route. */ |
| for (type = 0; type <= ZEBRA_ROUTE_MAX; type++) |
| if (EXTERNAL_INFO (type) && type != ZEBRA_ROUTE_OSPF) |
| { |
| rn = route_node_lookup (EXTERNAL_INFO (type), (struct prefix *) &p); |
| if (rn != NULL) |
| { |
| route_unlock_node (rn); |
| assert (rn->info); |
| if (ospf_redistribute_check (ospf, rn->info, NULL)) |
| return rn->info; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| int |
| ospf_default_originate_timer (struct thread *thread) |
| { |
| int *origin; |
| struct prefix_ipv4 p; |
| struct in_addr nexthop; |
| struct external_info *ei; |
| struct ospf *ospf = ospf_top; |
| |
| /* Get originate flags. */ |
| origin = THREAD_ARG (thread); |
| |
| p.family = AF_INET; |
| p.prefix.s_addr = 0; |
| p.prefixlen = 0; |
| |
| if (*origin == DEFAULT_ORIGINATE_ALWAYS) |
| { |
| /* If there is no default route via redistribute, |
| then originate AS-external-LSA with nexthop 0 (self). */ |
| nexthop.s_addr = 0; |
| ospf_external_info_add (DEFAULT_ROUTE, p, 0, nexthop); |
| } |
| |
| if ((ei = ospf_default_external_info ())) |
| ospf_external_lsa_originate (ospf, ei); |
| |
| return 0; |
| } |
| |
| /* Flush an AS-external-LSA from LSDB and routing domain. */ |
| void |
| ospf_external_lsa_flush (struct ospf *ospf, |
| u_char type, struct prefix_ipv4 *p, |
| unsigned int ifindex, struct in_addr nexthop) |
| { |
| struct ospf_lsa *lsa; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info ("LSA: Flushing AS-external-LSA %s/%d", |
| inet_ntoa (p->prefix), p->prefixlen); |
| |
| /* First lookup LSA from LSDB. */ |
| if (!(lsa = ospf_external_info_find_lsa (ospf, p))) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_warn ("LSA: There is no such AS-external-LSA %s/%d in LSDB", |
| inet_ntoa (p->prefix), p->prefixlen); |
| return; |
| } |
| |
| /* Sweep LSA from Link State Retransmit List. */ |
| ospf_ls_retransmit_delete_nbr_as (ospf, lsa); |
| |
| /* There must be no self-originated LSA in rtrs_external. */ |
| #if 0 |
| /* Remove External route from Zebra. */ |
| ospf_zebra_delete ((struct prefix_ipv4 *) p, &nexthop); |
| #endif |
| |
| if (!IS_LSA_MAXAGE (lsa)) |
| { |
| /* Unregister LSA from Refresh queue. */ |
| ospf_refresher_unregister_lsa (ospf, lsa); |
| |
| /* Flush AS-external-LSA through AS. */ |
| ospf_lsa_flush_as (ospf, lsa); |
| } |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info ("ospf_external_lsa_flush(): stop"); |
| } |
| |
| void |
| ospf_external_lsa_refresh_default (struct ospf *ospf) |
| { |
| struct prefix_ipv4 p; |
| struct external_info *ei; |
| struct ospf_lsa *lsa; |
| |
| p.family = AF_INET; |
| p.prefixlen = 0; |
| p.prefix.s_addr = 0; |
| |
| ei = ospf_default_external_info (); |
| lsa = ospf_external_info_find_lsa (ospf, &p); |
| |
| if (ei) |
| { |
| if (lsa) |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("LSA[Type5:0.0.0.0]: Refresh AS-external-LSA %p", lsa); |
| ospf_external_lsa_refresh (ospf, lsa, ei, LSA_REFRESH_FORCE); |
| } |
| else |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("LSA[Type5:0.0.0.0]: Originate AS-external-LSA"); |
| ospf_external_lsa_originate (ospf, ei); |
| } |
| } |
| else |
| { |
| if (lsa) |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("LSA[Type5:0.0.0.0]: Flush AS-external-LSA"); |
| ospf_lsa_flush_as (ospf, lsa); |
| } |
| } |
| } |
| |
| void |
| ospf_external_lsa_refresh_type (struct ospf *ospf, u_char type, int force) |
| { |
| struct route_node *rn; |
| struct external_info *ei; |
| |
| if (type != DEFAULT_ROUTE) |
| if (EXTERNAL_INFO(type)) |
| /* Refresh each redistributed AS-external-LSAs. */ |
| for (rn = route_top (EXTERNAL_INFO (type)); rn; rn = route_next (rn)) |
| if ((ei = rn->info)) |
| if (!is_prefix_default (&ei->p)) |
| { |
| struct ospf_lsa *lsa; |
| |
| if ((lsa = ospf_external_info_find_lsa (ospf, &ei->p))) |
| ospf_external_lsa_refresh (ospf, lsa, ei, force); |
| else |
| ospf_external_lsa_originate (ospf, ei); |
| } |
| } |
| |
| /* Refresh AS-external-LSA. */ |
| void |
| ospf_external_lsa_refresh (struct ospf *ospf, struct ospf_lsa *lsa, |
| struct external_info *ei, int force) |
| { |
| struct ospf_lsa *new; |
| int changed; |
| |
| /* Check the AS-external-LSA should be originated. */ |
| if (!ospf_redistribute_check (ospf, ei, &changed)) |
| { |
| ospf_external_lsa_flush (ospf, ei->type, &ei->p, |
| ei->ifindex, ei->nexthop); |
| return; |
| } |
| |
| if (!changed && !force) |
| return; |
| |
| /* Delete LSA from neighbor retransmit-list. */ |
| ospf_ls_retransmit_delete_nbr_as (ospf, lsa); |
| |
| /* Unregister AS-external-LSA from refresh-list. */ |
| ospf_refresher_unregister_lsa (ospf, lsa); |
| |
| new = ospf_external_lsa_new (ospf, ei, &lsa->data->id); |
| |
| if (new == NULL) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_warn ("LSA[Type%d:%s]: Could not be refreshed", lsa->data->type, |
| inet_ntoa (lsa->data->id)); |
| return; |
| } |
| |
| new->data->ls_seqnum = lsa_seqnum_increment (lsa); |
| |
| /* Record timestamp. */ |
| gettimeofday (&new->tv_orig, NULL); |
| |
| /* Re-calculate checksum. */ |
| ospf_lsa_checksum (new->data); |
| |
| ospf_lsa_install (ospf, NULL, new); /* As type-5. */ |
| |
| /* Flood LSA through AS. */ |
| ospf_flood_through_as (ospf, NULL, new); |
| |
| #ifdef HAVE_NSSA |
| /* If any attached NSSA, install as Type-7, flood to all NSSA Areas */ |
| if (ospf->anyNSSA) |
| ospf_install_flood_nssa (ospf, new, ei); /* Install/Flood per new rules */ |
| #endif /* HAVE_NSSA */ |
| |
| /* Register slef-originated LSA to refresh queue. */ |
| ospf_refresher_register_lsa (ospf, new); |
| |
| /* Debug logging. */ |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| { |
| zlog_info ("LSA[Type%d:%s]: AS-external-LSA refresh", |
| new->data->type, inet_ntoa (new->data->id)); |
| ospf_lsa_header_dump (new->data); |
| } |
| |
| return; |
| } |
| |
| |
| /* LSA installation functions. */ |
| |
| /* Install router-LSA to an area. */ |
| struct ospf_lsa * |
| ospf_router_lsa_install (struct ospf *ospf, |
| struct ospf_lsa *new, int rt_recalc) |
| { |
| struct ospf_area *area = new->area; |
| |
| /* RFC 2328 Section 13.2 Router-LSAs and network-LSAs |
| The entire routing table must be recalculated, starting with |
| the shortest path calculations for each area (not just the |
| area whose link-state database has changed). |
| */ |
| if (rt_recalc) |
| ospf_spf_calculate_schedule (ospf); |
| |
| if (IS_LSA_SELF (new)) |
| { |
| /* Set router-LSA refresh timer. */ |
| OSPF_TIMER_OFF (area->t_router_lsa_self); |
| OSPF_AREA_TIMER_ON (area->t_router_lsa_self, |
| ospf_router_lsa_timer, OSPF_LS_REFRESH_TIME); |
| |
| /* Set self-originated router-LSA. */ |
| ospf_lsa_unlock (area->router_lsa_self); |
| area->router_lsa_self = ospf_lsa_lock (new); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_INSTALL)) |
| zlog_info("LSA[Type%d]: ID %s is self-originated", |
| new->data->type, inet_ntoa (new->data->id)); |
| } |
| |
| return new; |
| } |
| |
| #define OSPF_INTERFACE_TIMER_ON(T,F,V) \ |
| if (!(T)) \ |
| (T) = thread_add_timer (master, (F), oi, (V)) |
| |
| /* Install network-LSA to an area. */ |
| struct ospf_lsa * |
| ospf_network_lsa_install (struct ospf *ospf, |
| struct ospf_interface *oi, |
| struct ospf_lsa *new, |
| int rt_recalc) |
| { |
| |
| /* RFC 2328 Section 13.2 Router-LSAs and network-LSAs |
| The entire routing table must be recalculated, starting with |
| the shortest path calculations for each area (not just the |
| area whose link-state database has changed). |
| */ |
| if (rt_recalc) |
| ospf_spf_calculate_schedule (ospf); |
| |
| /* We supposed that when LSA is originated by us, we pass the int |
| for which it was originated. If LSA was received by flooding, |
| the RECEIVED flag is set, so we do not link the LSA to the int. */ |
| if (IS_LSA_SELF (new) && !CHECK_FLAG (new->flags, OSPF_LSA_RECEIVED)) |
| { |
| /* Set LSRefresh timer. */ |
| OSPF_TIMER_OFF (oi->t_network_lsa_self); |
| |
| OSPF_INTERFACE_TIMER_ON (oi->t_network_lsa_self, |
| ospf_network_lsa_refresh_timer, |
| OSPF_LS_REFRESH_TIME); |
| |
| ospf_lsa_unlock (oi->network_lsa_self); |
| oi->network_lsa_self = ospf_lsa_lock (new); |
| } |
| |
| return new; |
| } |
| |
| /* Install summary-LSA to an area. */ |
| struct ospf_lsa * |
| ospf_summary_lsa_install (struct ospf *ospf, struct ospf_lsa *new, |
| int rt_recalc) |
| { |
| if (rt_recalc && !IS_LSA_SELF (new)) |
| { |
| /* RFC 2328 Section 13.2 Summary-LSAs |
| The best route to the destination described by the summary- |
| LSA must be recalculated (see Section 16.5). If this |
| destination is an AS boundary router, it may also be |
| necessary to re-examine all the AS-external-LSAs. |
| */ |
| |
| #if 0 |
| /* This doesn't exist yet... */ |
| ospf_summary_incremental_update(new); */ |
| #else /* #if 0 */ |
| ospf_spf_calculate_schedule (ospf); |
| #endif /* #if 0 */ |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_INSTALL)) |
| zlog_info ("ospf_summary_lsa_install(): SPF scheduled"); |
| } |
| |
| if (IS_LSA_SELF (new)) |
| ospf_refresher_register_lsa (ospf, new); |
| |
| return new; |
| } |
| |
| /* Install ASBR-summary-LSA to an area. */ |
| struct ospf_lsa * |
| ospf_summary_asbr_lsa_install (struct ospf *ospf, struct ospf_lsa *new, |
| int rt_recalc) |
| { |
| if (rt_recalc && !IS_LSA_SELF (new)) |
| { |
| /* RFC 2328 Section 13.2 Summary-LSAs |
| The best route to the destination described by the summary- |
| LSA must be recalculated (see Section 16.5). If this |
| destination is an AS boundary router, it may also be |
| necessary to re-examine all the AS-external-LSAs. |
| */ |
| #if 0 |
| /* These don't exist yet... */ |
| ospf_summary_incremental_update(new); |
| /* Isn't this done by the above call? |
| - RFC 2328 Section 16.5 implies it should be */ |
| /* ospf_ase_calculate_schedule(); */ |
| #else /* #if 0 */ |
| ospf_spf_calculate_schedule (ospf); |
| #endif /* #if 0 */ |
| } |
| |
| /* register LSA to refresh-list. */ |
| if (IS_LSA_SELF (new)) |
| ospf_refresher_register_lsa (ospf, new); |
| |
| return new; |
| } |
| |
| /* Install AS-external-LSA. */ |
| struct ospf_lsa * |
| ospf_external_lsa_install (struct ospf *ospf, struct ospf_lsa *new, |
| int rt_recalc) |
| { |
| ospf_ase_register_external_lsa (new, ospf); |
| /* If LSA is not self-originated, calculate an external route. */ |
| if (rt_recalc) |
| { |
| /* RFC 2328 Section 13.2 AS-external-LSAs |
| The best route to the destination described by the AS- |
| external-LSA must be recalculated (see Section 16.6). |
| */ |
| |
| if (!IS_LSA_SELF (new)) |
| ospf_ase_incremental_update (ospf, new); |
| } |
| |
| /* Register self-originated LSA to refresh queue. */ |
| if (IS_LSA_SELF (new)) |
| ospf_refresher_register_lsa (ospf, new); |
| |
| return new; |
| } |
| |
| void |
| ospf_discard_from_db (struct ospf *ospf, |
| struct ospf_lsdb *lsdb, struct ospf_lsa *lsa) |
| { |
| struct ospf_lsa *old; |
| |
| old = ospf_lsdb_lookup (lsdb, lsa); |
| |
| if (!old) |
| return; |
| |
| if (old->refresh_list >= 0) |
| ospf_refresher_unregister_lsa (ospf, old); |
| |
| switch (old->data->type) |
| { |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| ospf_ls_retransmit_delete_nbr_as (ospf, old); |
| ospf_ase_unregister_external_lsa (old, ospf); |
| break; |
| default: |
| ospf_ls_retransmit_delete_nbr_area (old->area, old); |
| break; |
| } |
| |
| ospf_lsa_maxage_delete (ospf, old); |
| ospf_lsa_discard (old); |
| } |
| |
| struct ospf_lsa * |
| ospf_lsa_install (struct ospf *ospf, struct ospf_interface *oi, |
| struct ospf_lsa *lsa) |
| { |
| struct ospf_lsa *new = NULL; |
| struct ospf_lsa *old = NULL; |
| struct ospf_lsdb *lsdb = NULL; |
| int rt_recalc; |
| |
| /* Set LSDB. */ |
| switch (lsa->data->type) |
| { |
| #ifdef HAVE_NSSA |
| /* kevinm */ |
| case OSPF_AS_NSSA_LSA: |
| if (lsa->area) |
| lsdb = lsa->area->lsdb; |
| else |
| lsdb = ospf->lsdb; |
| break; |
| #endif /* HAVE_NSSA */ |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| lsdb = ospf->lsdb; |
| break; |
| default: |
| lsdb = lsa->area->lsdb; |
| break; |
| } |
| |
| assert (lsdb); |
| |
| /* RFC 2328 13.2. Installing LSAs in the database |
| |
| Installing a new LSA in the database, either as the result of |
| flooding or a newly self-originated LSA, may cause the OSPF |
| routing table structure to be recalculated. The contents of the |
| new LSA should be compared to the old instance, if present. If |
| there is no difference, there is no need to recalculate the |
| routing table. When comparing an LSA to its previous instance, |
| the following are all considered to be differences in contents: |
| |
| o The LSA's Options field has changed. |
| |
| o One of the LSA instances has LS age set to MaxAge, and |
| the other does not. |
| |
| o The length field in the LSA header has changed. |
| |
| o The body of the LSA (i.e., anything outside the 20-byte |
| LSA header) has changed. Note that this excludes changes |
| in LS Sequence Number and LS Checksum. |
| |
| */ |
| /* Look up old LSA and determine if any SPF calculation or incremental |
| update is needed */ |
| old = ospf_lsdb_lookup (lsdb, lsa); |
| |
| /* Do comparision and record if recalc needed. */ |
| rt_recalc = 0; |
| if ( old == NULL || ospf_lsa_different(old, lsa)) |
| rt_recalc = 1; |
| |
| /* discard old LSA from LSDB */ |
| if (old != NULL) |
| ospf_discard_from_db (ospf, lsdb, lsa); |
| |
| /* Insert LSA to LSDB. */ |
| ospf_lsdb_add (lsdb, lsa); |
| lsa->lsdb = lsdb; |
| |
| /* Calculate Checksum if self-originated?. */ |
| if (IS_LSA_SELF (lsa)) |
| ospf_lsa_checksum (lsa->data); |
| |
| /* Do LSA specific installation process. */ |
| switch (lsa->data->type) |
| { |
| case OSPF_ROUTER_LSA: |
| new = ospf_router_lsa_install (ospf, lsa, rt_recalc); |
| break; |
| case OSPF_NETWORK_LSA: |
| assert (oi); |
| new = ospf_network_lsa_install (ospf, oi, lsa, rt_recalc); |
| break; |
| case OSPF_SUMMARY_LSA: |
| new = ospf_summary_lsa_install (ospf, lsa, rt_recalc); |
| break; |
| case OSPF_ASBR_SUMMARY_LSA: |
| new = ospf_summary_asbr_lsa_install (ospf, lsa, rt_recalc); |
| break; |
| case OSPF_AS_EXTERNAL_LSA: |
| new = ospf_external_lsa_install (ospf, lsa, rt_recalc); |
| break; |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_LINK_LSA: |
| if (IS_LSA_SELF (lsa)) |
| lsa->oi = oi; /* Specify outgoing ospf-interface for this LSA. */ |
| else |
| ; /* Incoming "oi" for this LSA has set at LSUpd reception. */ |
| /* Fallthrough */ |
| case OSPF_OPAQUE_AREA_LSA: |
| case OSPF_OPAQUE_AS_LSA: |
| new = ospf_opaque_lsa_install (lsa, rt_recalc); |
| break; |
| #endif /* HAVE_OPAQUE_LSA */ |
| default: /* NSSA, or type-6,8,9....nothing special */ |
| #ifdef HAVE_NSSA |
| new = ospf_external_lsa_install (ospf, lsa, rt_recalc); |
| #endif /* HAVE_NSSA */ |
| break; |
| } |
| |
| if (new == NULL) |
| return new; /* Installation failed, cannot proceed further -- endo. */ |
| |
| /* Debug logs. */ |
| if (IS_DEBUG_OSPF (lsa, LSA_INSTALL)) |
| { |
| char area_str[INET_ADDRSTRLEN]; |
| |
| switch (lsa->data->type) |
| { |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| #ifdef HAVE_NSSA |
| case OSPF_AS_NSSA_LSA: |
| #endif /* HAVE_NSSA */ |
| zlog_info ("LSA[%s]: Install %s", |
| dump_lsa_key (new), |
| LOOKUP (ospf_lsa_type_msg, new->data->type)); |
| break; |
| default: |
| strcpy (area_str, inet_ntoa (new->area->area_id)); |
| zlog_info ("LSA[%s]: Install %s to Area %s", |
| dump_lsa_key (new), |
| LOOKUP (ospf_lsa_type_msg, new->data->type), area_str); |
| break; |
| } |
| } |
| |
| /* If received LSA' ls_age is MaxAge, set LSA on MaxAge LSA list. */ |
| if (IS_LSA_MAXAGE (new) && !IS_LSA_SELF (new)) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info ("LSA[Type%d:%s]: Install LSA, MaxAge", |
| new->data->type, inet_ntoa (new->data->id)); |
| ospf_lsa_maxage (ospf, lsa); |
| } |
| |
| return new; |
| } |
| |
| |
| int |
| ospf_check_nbr_status (struct ospf *ospf) |
| { |
| listnode node; |
| |
| for (node = listhead (ospf->oiflist); node; node = nextnode (node)) |
| { |
| struct ospf_interface *oi = getdata (node); |
| struct route_node *rn; |
| struct ospf_neighbor *nbr; |
| |
| if (ospf_if_is_enable (oi)) |
| for (rn = route_top (oi->nbrs); rn; rn = route_next (rn)) |
| if ((nbr = rn->info) != NULL) |
| if (nbr->state == NSM_Exchange || nbr->state == NSM_Loading) |
| { |
| route_unlock_node (rn); |
| return 0; |
| } |
| } |
| |
| return 1; |
| } |
| |
| |
| #ifdef ORIGINAL_CODING |
| /* This function flood the maxaged LSA to DR. */ |
| void |
| ospf_maxage_flood (struct ospf_lsa *lsa) |
| { |
| switch (lsa->data->type) |
| { |
| case OSPF_ROUTER_LSA: |
| case OSPF_NETWORK_LSA: |
| case OSPF_SUMMARY_LSA: |
| case OSPF_ASBR_SUMMARY_LSA: |
| #ifdef HAVE_NSSA |
| case OSPF_AS_NSSA_LSA: |
| #endif /* HAVE_NSSA */ |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_LINK_LSA: |
| case OSPF_OPAQUE_AREA_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| ospf_flood_through_area (lsa->area, NULL, lsa); |
| break; |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| ospf_flood_through_as (NULL, lsa); |
| break; |
| default: |
| break; |
| } |
| } |
| #endif /* ORIGINAL_CODING */ |
| |
| int |
| ospf_maxage_lsa_remover (struct thread *thread) |
| { |
| struct ospf *ospf = THREAD_ARG (thread); |
| listnode node; |
| listnode next; |
| int reschedule = 0; |
| |
| ospf->t_maxage = NULL; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info ("LSA[MaxAge]: remover Start"); |
| |
| reschedule = !ospf_check_nbr_status (ospf); |
| |
| if (!reschedule) |
| for (node = listhead (ospf->maxage_lsa); node; node = next) |
| { |
| struct ospf_lsa *lsa = getdata (node); |
| next = node->next; |
| |
| if (lsa->retransmit_counter > 0) |
| { |
| reschedule = 1; |
| continue; |
| } |
| |
| /* Remove LSA from the LSDB */ |
| if (CHECK_FLAG (lsa->flags, OSPF_LSA_SELF)) |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info ("LSA[Type%d:%s]: This LSA is self-originated: ", |
| lsa->data->type, inet_ntoa (lsa->data->id)); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info ("LSA[Type%d:%s]: MaxAge LSA removed from list", |
| lsa->data->type, inet_ntoa (lsa->data->id)); |
| |
| /* Flood max age LSA. */ |
| #ifdef ORIGINAL_CODING |
| ospf_maxage_flood (lsa); |
| #else /* ORIGINAL_CODING */ |
| ospf_flood_through (ospf, NULL, lsa); |
| #endif /* ORIGINAL_CODING */ |
| |
| /* Remove from lsdb. */ |
| ospf_discard_from_db (ospf, lsa->lsdb, lsa); |
| ospf_lsdb_delete (lsa->lsdb, lsa); |
| } |
| |
| /* A MaxAge LSA must be removed immediately from the router's link |
| state database as soon as both a) it is no longer contained on any |
| neighbor Link state retransmission lists and b) none of the router's |
| neighbors are in states Exchange or Loading. */ |
| if (reschedule) |
| OSPF_TIMER_ON (ospf->t_maxage, ospf_maxage_lsa_remover, 2); |
| |
| return 0; |
| } |
| |
| int |
| ospf_lsa_maxage_exist (struct ospf *ospf, struct ospf_lsa *new) |
| { |
| listnode node; |
| |
| for (node = listhead (ospf->maxage_lsa); node; nextnode (node)) |
| if (((struct ospf_lsa *) node->data) == new) |
| return 1; |
| |
| return 0; |
| } |
| |
| void |
| ospf_lsa_maxage_delete (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| listnode n; |
| |
| if ((n = listnode_lookup (ospf->maxage_lsa, lsa))) |
| { |
| list_delete_node (ospf->maxage_lsa, n); |
| ospf_lsa_unlock (lsa); |
| } |
| } |
| |
| void |
| ospf_lsa_maxage (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| /* When we saw a MaxAge LSA flooded to us, we put it on the list |
| and schedule the MaxAge LSA remover. */ |
| if (ospf_lsa_maxage_exist (ospf, lsa)) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info ("LSA[Type%d:%s]: %p already exists on MaxAge LSA list", |
| lsa->data->type, inet_ntoa (lsa->data->id), lsa); |
| return; |
| } |
| |
| listnode_add (ospf->maxage_lsa, ospf_lsa_lock (lsa)); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info ("LSA[%s]: MaxAge LSA remover scheduled.", dump_lsa_key (lsa)); |
| |
| OSPF_TIMER_ON (ospf->t_maxage, ospf_maxage_lsa_remover, 2); |
| } |
| |
| int |
| ospf_lsa_maxage_walker_remover (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| #ifdef HAVE_NSSA |
| /* Stay away from any Local Translated Type-7 LSAs */ |
| if (CHECK_FLAG (lsa->flags, OSPF_LSA_LOCAL_XLT)) |
| return 0; |
| #endif /* HAVE_NSSA */ |
| |
| if (IS_LSA_MAXAGE (lsa)) |
| /* Self-originated LSAs should NOT time-out instead, |
| they're flushed and submitted to the max_age list explicitly. */ |
| if (!ospf_lsa_is_self_originated (ospf, lsa)) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_FLOODING)) |
| zlog_info("LSA[%s]: is MaxAge", dump_lsa_key (lsa)); |
| |
| switch (lsa->data->type) |
| { |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_LINK_LSA: |
| case OSPF_OPAQUE_AREA_LSA: |
| case OSPF_OPAQUE_AS_LSA: |
| /* |
| * As a general rule, whenever network topology has changed |
| * (due to an LSA removal in this case), routing recalculation |
| * should be triggered. However, this is not true for opaque |
| * LSAs. Even if an opaque LSA instance is going to be removed |
| * from the routing domain, it does not mean a change in network |
| * topology, and thus, routing recalculation is not needed here. |
| */ |
| break; |
| #endif /* HAVE_OPAQUE_LSA */ |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_NSSA |
| case OSPF_AS_NSSA_LSA: |
| #endif /* HAVE_NSSA */ |
| ospf_ase_incremental_update (ospf, lsa); |
| break; |
| default: |
| ospf_spf_calculate_schedule (ospf); |
| break; |
| } |
| ospf_lsa_maxage (ospf, lsa); |
| } |
| |
| return 0; |
| } |
| |
| /* Periodical check of MaxAge LSA. */ |
| int |
| ospf_lsa_maxage_walker (struct thread *thread) |
| { |
| struct ospf *ospf = THREAD_ARG (thread); |
| struct route_node *rn; |
| struct ospf_lsa *lsa; |
| listnode node; |
| |
| ospf->t_maxage_walker = NULL; |
| |
| for (node = listhead (ospf->areas); node; nextnode (node)) |
| { |
| struct ospf_area *area = node->data; |
| |
| LSDB_LOOP (ROUTER_LSDB (area), rn, lsa) |
| ospf_lsa_maxage_walker_remover (ospf, lsa); |
| LSDB_LOOP (NETWORK_LSDB (area), rn, lsa) |
| ospf_lsa_maxage_walker_remover (ospf, lsa); |
| LSDB_LOOP (SUMMARY_LSDB (area), rn, lsa) |
| ospf_lsa_maxage_walker_remover (ospf, lsa); |
| LSDB_LOOP (ASBR_SUMMARY_LSDB (area), rn, lsa) |
| ospf_lsa_maxage_walker_remover (ospf, lsa); |
| #ifdef HAVE_OPAQUE_LSA |
| LSDB_LOOP (OPAQUE_AREA_LSDB (area), rn, lsa) |
| ospf_lsa_maxage_walker_remover (ospf, lsa); |
| LSDB_LOOP (OPAQUE_LINK_LSDB (area), rn, lsa) |
| ospf_lsa_maxage_walker_remover (ospf, lsa); |
| #endif /* HAVE_OPAQUE_LSA */ |
| } |
| |
| /* for AS-eternal-LSAs. */ |
| if (ospf->lsdb) |
| { |
| LSDB_LOOP (EXTERNAL_LSDB (ospf), rn, lsa) |
| ospf_lsa_maxage_walker_remover (ospf, lsa); |
| #ifdef HAVE_OPAQUE_LSA |
| LSDB_LOOP (OPAQUE_AS_LSDB (ospf), rn, lsa) |
| ospf_lsa_maxage_walker_remover (ospf, lsa); |
| #endif /* HAVE_OPAQUE_LSA */ |
| } |
| |
| OSPF_TIMER_ON (ospf->t_maxage_walker, ospf_lsa_maxage_walker, |
| OSPF_LSA_MAXAGE_CHECK_INTERVAL); |
| return 0; |
| } |
| |
| struct ospf_lsa * |
| ospf_lsa_lookup_by_prefix (struct ospf_lsdb *lsdb, u_char type, |
| struct prefix_ipv4 *p, struct in_addr router_id) |
| { |
| struct ospf_lsa *lsa; |
| struct in_addr mask, id; |
| struct lsa_header_mask |
| { |
| struct lsa_header header; |
| struct in_addr mask; |
| } *hmask; |
| |
| lsa = ospf_lsdb_lookup_by_id (lsdb, type, p->prefix, router_id); |
| if (lsa == NULL) |
| return NULL; |
| |
| masklen2ip (p->prefixlen, &mask); |
| |
| hmask = (struct lsa_header_mask *) lsa->data; |
| |
| if (mask.s_addr != hmask->mask.s_addr) |
| { |
| id.s_addr = p->prefix.s_addr | (~mask.s_addr); |
| lsa = ospf_lsdb_lookup_by_id (lsdb, type, id, router_id); |
| if (!lsa) |
| return NULL; |
| } |
| |
| return lsa; |
| } |
| |
| struct ospf_lsa * |
| ospf_lsa_lookup (struct ospf_area *area, u_int32_t type, |
| struct in_addr id, struct in_addr adv_router) |
| { |
| switch (type) |
| { |
| case OSPF_ROUTER_LSA: |
| case OSPF_NETWORK_LSA: |
| case OSPF_SUMMARY_LSA: |
| case OSPF_ASBR_SUMMARY_LSA: |
| #ifdef HAVE_NSSA |
| case OSPF_AS_NSSA_LSA: |
| #endif /* HAVE_NSSA */ |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_LINK_LSA: |
| case OSPF_OPAQUE_AREA_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| return ospf_lsdb_lookup_by_id (area->lsdb, type, id, adv_router); |
| break; |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_AS_LSA: |
| #endif /* HAVE_OPAQUE_LSA */ |
| return ospf_lsdb_lookup_by_id (ospf_top->lsdb, type, id, adv_router); |
| break; |
| default: |
| break; |
| } |
| |
| return NULL; |
| } |
| |
| struct ospf_lsa * |
| ospf_lsa_lookup_by_id (struct ospf_area *area, u_int32_t type, |
| struct in_addr id) |
| { |
| struct ospf_lsa *lsa; |
| struct route_node *rn; |
| |
| switch (type) |
| { |
| case OSPF_ROUTER_LSA: |
| return ospf_lsdb_lookup_by_id (area->lsdb, type, id, id); |
| break; |
| case OSPF_NETWORK_LSA: |
| for (rn = route_top (NETWORK_LSDB (area)); rn; rn = route_next (rn)) |
| if ((lsa = rn->info)) |
| if (IPV4_ADDR_SAME (&lsa->data->id, &id)) |
| { |
| route_unlock_node (rn); |
| return lsa; |
| } |
| break; |
| case OSPF_SUMMARY_LSA: |
| case OSPF_ASBR_SUMMARY_LSA: |
| /* Currently not used. */ |
| assert (1); |
| return ospf_lsdb_lookup_by_id (area->lsdb, type, id, id); |
| break; |
| case OSPF_AS_EXTERNAL_LSA: |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_LINK_LSA: |
| case OSPF_OPAQUE_AREA_LSA: |
| case OSPF_OPAQUE_AS_LSA: |
| /* Currently not used. */ |
| break; |
| #endif /* HAVE_OPAQUE_LSA */ |
| default: |
| break; |
| } |
| |
| return NULL; |
| } |
| |
| struct ospf_lsa * |
| ospf_lsa_lookup_by_header (struct ospf_area *area, struct lsa_header *lsah) |
| { |
| struct ospf_lsa *match; |
| |
| #ifdef HAVE_OPAQUE_LSA |
| /* |
| * Strictly speaking, the LSA-ID field for Opaque-LSAs (type-9/10/11) |
| * is redefined to have two subfields; opaque-type and opaque-id. |
| * However, it is harmless to treat the two sub fields together, as if |
| * they two were forming a unique LSA-ID. |
| */ |
| #endif /* HAVE_OPAQUE_LSA */ |
| |
| match = ospf_lsa_lookup (area, lsah->type, lsah->id, lsah->adv_router); |
| |
| if (match == NULL) |
| if (IS_DEBUG_OSPF (lsa, LSA) == OSPF_DEBUG_LSA) |
| zlog_info ("LSA[Type%d:%s]: Lookup by header, NO MATCH", |
| lsah->type, inet_ntoa (lsah->id)); |
| |
| return match; |
| } |
| |
| /* return +n, l1 is more recent. |
| return -n, l2 is more recent. |
| return 0, l1 and l2 is identical. */ |
| int |
| ospf_lsa_more_recent (struct ospf_lsa *l1, struct ospf_lsa *l2) |
| { |
| int r; |
| int x, y; |
| |
| if (l1 == NULL && l2 == NULL) |
| return 0; |
| if (l1 == NULL) |
| return -1; |
| if (l2 == NULL) |
| return 1; |
| |
| /* compare LS sequence number. */ |
| x = (int) ntohl (l1->data->ls_seqnum); |
| y = (int) ntohl (l2->data->ls_seqnum); |
| if (x > y) |
| return 1; |
| if (x < y) |
| return -1; |
| |
| /* compare LS checksum. */ |
| r = ntohs (l1->data->checksum) - ntohs (l2->data->checksum); |
| if (r) |
| return r; |
| |
| /* compare LS age. */ |
| if (IS_LSA_MAXAGE (l1) && !IS_LSA_MAXAGE (l2)) |
| return 1; |
| else if (!IS_LSA_MAXAGE (l1) && IS_LSA_MAXAGE (l2)) |
| return -1; |
| |
| /* compare LS age with MaxAgeDiff. */ |
| if (LS_AGE (l1) - LS_AGE (l2) > OSPF_LSA_MAXAGE_DIFF) |
| return -1; |
| else if (LS_AGE (l2) - LS_AGE (l1) > OSPF_LSA_MAXAGE_DIFF) |
| return 1; |
| |
| /* LSAs are identical. */ |
| return 0; |
| } |
| |
| /* If two LSAs are different, return 1, otherwise return 0. */ |
| int |
| ospf_lsa_different (struct ospf_lsa *l1, struct ospf_lsa *l2) |
| { |
| char *p1, *p2; |
| assert (l1); |
| assert (l2); |
| assert (l1->data); |
| assert (l2->data); |
| |
| if (l1->data->options != l2->data->options) |
| return 1; |
| |
| if (IS_LSA_MAXAGE (l1) && !IS_LSA_MAXAGE (l2)) |
| return 1; |
| |
| if (IS_LSA_MAXAGE (l2) && !IS_LSA_MAXAGE (l1)) |
| return 1; |
| |
| if (l1->data->length != l2->data->length) |
| return 1; |
| |
| if (l1->data->length == 0) |
| return 1; |
| |
| assert (l1->data->length > OSPF_LSA_HEADER_SIZE); |
| |
| p1 = (char *) l1->data; |
| p2 = (char *) l2->data; |
| |
| if (memcmp (p1 + OSPF_LSA_HEADER_SIZE, p2 + OSPF_LSA_HEADER_SIZE, |
| ntohs( l1->data->length ) - OSPF_LSA_HEADER_SIZE) != 0) |
| return 1; |
| |
| return 0; |
| } |
| |
| #ifdef ORIGINAL_CODING |
| void |
| ospf_lsa_flush_self_originated (struct ospf_neighbor *nbr, |
| struct ospf_lsa *self, |
| struct ospf_lsa *new) |
| { |
| u_int32_t seqnum; |
| |
| /* Adjust LS Sequence Number. */ |
| seqnum = ntohl (new->data->ls_seqnum) + 1; |
| self->data->ls_seqnum = htonl (seqnum); |
| |
| /* Recalculate LSA checksum. */ |
| ospf_lsa_checksum (self->data); |
| |
| /* Reflooding LSA. */ |
| /* RFC2328 Section 13.3 |
| On non-broadcast networks, separate Link State Update |
| packets must be sent, as unicasts, to each adjacent neighbor |
| (i.e., those in state Exchange or greater). The destination |
| IP addresses for these packets are the neighbors' IP |
| addresses. */ |
| if (nbr->oi->type == OSPF_IFTYPE_NBMA) |
| { |
| struct route_node *rn; |
| struct ospf_neighbor *onbr; |
| |
| for (rn = route_top (nbr->oi->nbrs); rn; rn = route_next (rn)) |
| if ((onbr = rn->info) != NULL) |
| if (onbr != nbr->oi->nbr_self && onbr->status >= NSM_Exchange) |
| ospf_ls_upd_send_lsa (onbr, self, OSPF_SEND_PACKET_DIRECT); |
| } |
| else |
| ospf_ls_upd_send_lsa (nbr, self, OSPF_SEND_PACKET_INDIRECT); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_info ("LSA[Type%d:%s]: Flush self-originated LSA", |
| self->data->type, inet_ntoa (self->data->id)); |
| } |
| #else /* ORIGINAL_CODING */ |
| static int |
| ospf_lsa_flush_schedule (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| if (lsa == NULL || !IS_LSA_SELF (lsa)) |
| return 0; |
| |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("LSA[Type%d:%s]: Schedule self-originated LSA to FLUSH", lsa->data->type, inet_ntoa (lsa->data->id)); |
| |
| /* Force given lsa's age to MaxAge. */ |
| lsa->data->ls_age = htons (OSPF_LSA_MAXAGE); |
| |
| switch (lsa->data->type) |
| { |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_LINK_LSA: |
| case OSPF_OPAQUE_AREA_LSA: |
| case OSPF_OPAQUE_AS_LSA: |
| ospf_opaque_lsa_refresh (lsa); |
| break; |
| #endif /* HAVE_OPAQUE_LSA */ |
| default: |
| ospf_lsa_maxage (ospf, lsa); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| void |
| ospf_flush_self_originated_lsas_now (struct ospf *ospf) |
| { |
| listnode n1, n2; |
| struct ospf_area *area; |
| struct ospf_interface *oi; |
| struct ospf_lsa *lsa; |
| struct route_node *rn; |
| int need_to_flush_ase = 0; |
| |
| for (n1 = listhead (ospf->areas); n1; nextnode (n1)) |
| { |
| if ((area = getdata (n1)) == NULL) |
| continue; |
| |
| if ((lsa = area->router_lsa_self) != NULL) |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("LSA[Type%d:%s]: Schedule self-originated LSA to FLUSH", lsa->data->type, inet_ntoa (lsa->data->id)); |
| |
| ospf_lsa_flush_area (lsa, area); |
| ospf_lsa_unlock (area->router_lsa_self); |
| area->router_lsa_self = NULL; |
| OSPF_TIMER_OFF (area->t_router_lsa_self); |
| } |
| |
| for (n2 = listhead (area->oiflist); n2; nextnode (n2)) |
| { |
| if ((oi = getdata (n2)) == NULL) |
| continue; |
| |
| if ((lsa = oi->network_lsa_self) != NULL |
| && oi->state == ISM_DR |
| && oi->full_nbrs > 0) |
| { |
| if (IS_DEBUG_OSPF_EVENT) |
| zlog_info ("LSA[Type%d:%s]: Schedule self-originated LSA to FLUSH", lsa->data->type, inet_ntoa (lsa->data->id)); |
| |
| ospf_lsa_flush_area (oi->network_lsa_self, area); |
| ospf_lsa_unlock (oi->network_lsa_self); |
| oi->network_lsa_self = NULL; |
| OSPF_TIMER_OFF (oi->t_network_lsa_self); |
| } |
| |
| if (oi->type != OSPF_IFTYPE_VIRTUALLINK |
| && area->external_routing == OSPF_AREA_DEFAULT) |
| need_to_flush_ase = 1; |
| } |
| |
| LSDB_LOOP (SUMMARY_LSDB (area), rn, lsa) |
| ospf_lsa_flush_schedule (ospf, lsa); |
| LSDB_LOOP (ASBR_SUMMARY_LSDB (area), rn, lsa) |
| ospf_lsa_flush_schedule (ospf, lsa); |
| #ifdef HAVE_OPAQUE_LSA |
| LSDB_LOOP (OPAQUE_LINK_LSDB (area), rn, lsa) |
| ospf_lsa_flush_schedule (ospf, lsa); |
| LSDB_LOOP (OPAQUE_AREA_LSDB (area), rn, lsa) |
| ospf_lsa_flush_schedule (ospf, lsa); |
| #endif /* HAVE_OPAQUE_LSA */ |
| } |
| |
| if (need_to_flush_ase) |
| { |
| LSDB_LOOP (EXTERNAL_LSDB (ospf), rn, lsa) |
| ospf_lsa_flush_schedule (ospf, lsa); |
| #ifdef HAVE_OPAQUE_LSA |
| LSDB_LOOP (OPAQUE_AS_LSDB (ospf), rn, lsa) |
| ospf_lsa_flush_schedule (ospf, lsa); |
| #endif /* HAVE_OPAQUE_LSA */ |
| } |
| |
| /* |
| * Make sure that the MaxAge LSA remover is executed immediately, |
| * without conflicting to other threads. |
| */ |
| if (ospf->t_maxage != NULL) |
| { |
| OSPF_TIMER_OFF (ospf->t_maxage); |
| thread_execute (master, ospf_maxage_lsa_remover, ospf, 0); |
| } |
| |
| return; |
| } |
| #endif /* ORIGINAL_CODING */ |
| |
| /* If there is self-originated LSA, then return 1, otherwise return 0. */ |
| /* An interface-independent version of ospf_lsa_is_self_originated */ |
| int |
| ospf_lsa_is_self_originated (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| listnode node; |
| |
| /* This LSA is already checked. */ |
| if (CHECK_FLAG (lsa->flags, OSPF_LSA_SELF_CHECKED)) |
| return CHECK_FLAG (lsa->flags, OSPF_LSA_SELF); |
| |
| /* Make sure LSA is self-checked. */ |
| SET_FLAG (lsa->flags, OSPF_LSA_SELF_CHECKED); |
| |
| /* AdvRouter and Router ID is the same. */ |
| if (IPV4_ADDR_SAME (&lsa->data->adv_router, &ospf->router_id)) |
| SET_FLAG (lsa->flags, OSPF_LSA_SELF); |
| |
| /* LSA is router-LSA. */ |
| else if (lsa->data->type == OSPF_ROUTER_LSA && |
| IPV4_ADDR_SAME (&lsa->data->id, &ospf->router_id)) |
| SET_FLAG (lsa->flags, OSPF_LSA_SELF); |
| |
| /* LSA is network-LSA. Compare Link ID with all interfaces. */ |
| else if (lsa->data->type == OSPF_NETWORK_LSA) |
| for (node = listhead (ospf->oiflist); node; nextnode (node)) |
| { |
| struct ospf_interface *oi = getdata (node); |
| |
| /* Ignore virtual link. */ |
| if (oi->type != OSPF_IFTYPE_VIRTUALLINK) |
| if (oi->address->family == AF_INET) |
| if (IPV4_ADDR_SAME (&lsa->data->id, &oi->address->u.prefix4)) |
| { |
| /* to make it easier later */ |
| SET_FLAG (lsa->flags, OSPF_LSA_SELF); |
| return CHECK_FLAG (lsa->flags, OSPF_LSA_SELF); |
| } |
| } |
| |
| return CHECK_FLAG (lsa->flags, OSPF_LSA_SELF); |
| } |
| |
| /* Get unique Link State ID. */ |
| struct in_addr |
| ospf_lsa_unique_id (struct ospf *ospf, |
| struct ospf_lsdb *lsdb, u_char type, struct prefix_ipv4 *p) |
| { |
| struct ospf_lsa *lsa; |
| struct in_addr mask, id; |
| |
| id = p->prefix; |
| |
| /* Check existence of LSA instance. */ |
| lsa = ospf_lsdb_lookup_by_id (lsdb, type, id, ospf->router_id); |
| if (lsa) |
| { |
| struct as_external_lsa *al = (struct as_external_lsa *) lsa->data; |
| if (ip_masklen (al->mask) == p->prefixlen) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_warn ("ospf_lsa_unique_id(): " |
| "Can't get Link State ID for %s/%d", |
| inet_ntoa (p->prefix), p->prefixlen); |
| /* id.s_addr = 0; */ |
| id.s_addr = 0xffffffff; |
| return id; |
| } |
| /* Masklen differs, then apply wildcard mask to Link State ID. */ |
| else |
| { |
| masklen2ip (p->prefixlen, &mask); |
| |
| id.s_addr = p->prefix.s_addr | (~mask.s_addr); |
| lsa = ospf_lsdb_lookup_by_id (ospf->lsdb, type, |
| id, ospf->router_id); |
| if (lsa) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_GENERATE)) |
| zlog_warn ("ospf_lsa_unique_id(): " |
| "Can't get Link State ID for %s/%d", |
| inet_ntoa (p->prefix), p->prefixlen); |
| /* id.s_addr = 0; */ |
| id.s_addr = 0xffffffff; |
| return id; |
| } |
| } |
| } |
| |
| return id; |
| } |
| |
| |
| #define LSA_ACTION_ORIGN_RTR 1 |
| #define LSA_ACTION_ORIGN_NET 2 |
| #define LSA_ACTION_FLOOD_AREA 3 |
| #define LSA_ACTION_FLOOD_AS 4 |
| #define LSA_ACTION_FLUSH_AREA 5 |
| #define LSA_ACTION_FLUSH_AS 6 |
| |
| struct lsa_action |
| { |
| u_char action; |
| struct ospf_area *area; |
| struct ospf_interface *oi; |
| struct ospf_lsa *lsa; |
| }; |
| |
| int |
| ospf_lsa_action (struct thread *t) |
| { |
| struct lsa_action *data; |
| struct ospf *ospf = ospf_top; |
| |
| data = THREAD_ARG (t); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA) == OSPF_DEBUG_LSA) |
| zlog_info ("LSA[Action]: Performing scheduled LSA action: %d", |
| data->action); |
| |
| switch (data->action) |
| { |
| case LSA_ACTION_ORIGN_RTR: |
| ospf_router_lsa_refresh (data->area->router_lsa_self); |
| break; |
| case LSA_ACTION_ORIGN_NET: |
| ospf_network_lsa_originate (data->oi); |
| break; |
| case LSA_ACTION_FLOOD_AREA: |
| ospf_flood_through_area (data->area, NULL, data->lsa); |
| break; |
| case LSA_ACTION_FLOOD_AS: |
| ospf_flood_through_as (ospf, NULL, data->lsa); |
| break; |
| case LSA_ACTION_FLUSH_AREA: |
| ospf_lsa_flush_area (data->lsa, data->area); |
| break; |
| case LSA_ACTION_FLUSH_AS: |
| ospf_lsa_flush_as (ospf, data->lsa); |
| break; |
| } |
| |
| ospf_lsa_unlock (data->lsa); |
| XFREE (MTYPE_OSPF_MESSAGE, data); |
| return 0; |
| } |
| |
| void |
| ospf_schedule_lsa_flood_area (struct ospf_area *area, struct ospf_lsa *lsa) |
| { |
| struct lsa_action *data; |
| |
| data = XMALLOC (MTYPE_OSPF_MESSAGE, sizeof (struct lsa_action)); |
| memset (data, 0, sizeof (struct lsa_action)); |
| |
| data->action = LSA_ACTION_FLOOD_AREA; |
| data->area = area; |
| data->lsa = ospf_lsa_lock (lsa); |
| |
| thread_add_event (master, ospf_lsa_action, data, 0); |
| } |
| |
| void |
| ospf_schedule_lsa_flush_area (struct ospf_area *area, struct ospf_lsa *lsa) |
| { |
| struct lsa_action *data; |
| |
| data = XMALLOC (MTYPE_OSPF_MESSAGE, sizeof (struct lsa_action)); |
| memset (data, 0, sizeof (struct lsa_action)); |
| |
| data->action = LSA_ACTION_FLUSH_AREA; |
| data->area = area; |
| data->lsa = ospf_lsa_lock (lsa); |
| |
| thread_add_event (master, ospf_lsa_action, data, 0); |
| } |
| |
| |
| /* LSA Refreshment functions. */ |
| void |
| ospf_lsa_refresh (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| struct external_info *ei; |
| assert (CHECK_FLAG (lsa->flags, OSPF_LSA_SELF)); |
| |
| switch (lsa->data->type) |
| { |
| /* Router and Network LSAs are processed differently. */ |
| case OSPF_ROUTER_LSA: |
| case OSPF_NETWORK_LSA: |
| break; |
| case OSPF_SUMMARY_LSA: |
| ospf_summary_lsa_refresh (ospf, lsa); |
| break; |
| case OSPF_ASBR_SUMMARY_LSA: |
| ospf_summary_asbr_lsa_refresh (ospf, lsa); |
| break; |
| case OSPF_AS_EXTERNAL_LSA: |
| ei = ospf_external_info_check (lsa); |
| if (ei) |
| ospf_external_lsa_refresh (ospf, lsa, ei, LSA_REFRESH_FORCE); |
| else |
| ospf_lsa_flush_as (ospf, lsa); |
| break; |
| #ifdef HAVE_OPAQUE_LSA |
| case OSPF_OPAQUE_LINK_LSA: |
| case OSPF_OPAQUE_AREA_LSA: |
| case OSPF_OPAQUE_AS_LSA: |
| ospf_opaque_lsa_refresh (lsa); |
| break; |
| default: |
| break; |
| #endif /* HAVE_OPAQUE_LSA */ |
| } |
| } |
| |
| void |
| ospf_refresher_register_lsa (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| u_int16_t index, current_index; |
| |
| assert (CHECK_FLAG (lsa->flags, OSPF_LSA_SELF)); |
| |
| if (lsa->refresh_list < 0) |
| { |
| int delay; |
| |
| if (LS_AGE (lsa) == 0 && |
| ntohl (lsa->data->ls_seqnum) == OSPF_INITIAL_SEQUENCE_NUMBER) |
| /* Randomize first update by OSPF_LS_REFRESH_SHIFT factor */ |
| delay = OSPF_LS_REFRESH_SHIFT + (random () % OSPF_LS_REFRESH_TIME); |
| else |
| /* Randomize another updates by +-OSPF_LS_REFRESH_JITTER factor */ |
| delay = OSPF_LS_REFRESH_TIME - LS_AGE (lsa) - OSPF_LS_REFRESH_JITTER |
| + (random () % (2*OSPF_LS_REFRESH_JITTER)); |
| |
| if (delay < 0) |
| delay = 0; |
| |
| current_index = ospf->lsa_refresh_queue.index + |
| (time (NULL) - ospf->lsa_refresher_started)/OSPF_LSA_REFRESHER_GRANULARITY; |
| |
| index = (current_index + delay/OSPF_LSA_REFRESHER_GRANULARITY) |
| % (OSPF_LSA_REFRESHER_SLOTS); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_REFRESH)) |
| zlog_info ("LSA[Refresh]: lsa with age %d added to index %d", |
| LS_AGE (lsa), index); |
| if (!ospf->lsa_refresh_queue.qs[index]) |
| ospf->lsa_refresh_queue.qs[index] = list_new (); |
| listnode_add (ospf->lsa_refresh_queue.qs[index], ospf_lsa_lock (lsa)); |
| lsa->refresh_list = index; |
| if (IS_DEBUG_OSPF (lsa, LSA_REFRESH)) |
| zlog_info ("LSA[Refresh]: ospf_refresher_register_lsa(): setting refresh_list on lsa %p (slod %d)", lsa, index); |
| } |
| } |
| |
| void |
| ospf_refresher_unregister_lsa (struct ospf *ospf, struct ospf_lsa *lsa) |
| { |
| assert (CHECK_FLAG (lsa->flags, OSPF_LSA_SELF)); |
| if (lsa->refresh_list >= 0) |
| { |
| list refresh_list = ospf->lsa_refresh_queue.qs[lsa->refresh_list]; |
| listnode_delete (refresh_list, lsa); |
| if (!listcount (refresh_list)) |
| { |
| list_free (refresh_list); |
| ospf->lsa_refresh_queue.qs[lsa->refresh_list] = NULL; |
| } |
| ospf_lsa_unlock (lsa); |
| lsa->refresh_list = -1; |
| } |
| } |
| |
| int |
| ospf_lsa_refresh_walker (struct thread *t) |
| { |
| list refresh_list; |
| listnode node; |
| struct ospf *ospf = THREAD_ARG (t); |
| int i; |
| list lsa_to_refresh = list_new (); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_REFRESH)) |
| zlog_info ("LSA[Refresh]:ospf_lsa_refresh_walker(): start"); |
| |
| |
| i = ospf->lsa_refresh_queue.index; |
| |
| ospf->lsa_refresh_queue.index = |
| (ospf->lsa_refresh_queue.index + |
| (time (NULL) - ospf->lsa_refresher_started) / OSPF_LSA_REFRESHER_GRANULARITY) |
| % OSPF_LSA_REFRESHER_SLOTS; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_REFRESH)) |
| zlog_info ("LSA[Refresh]: ospf_lsa_refresh_walker(): next index %d", |
| ospf->lsa_refresh_queue.index); |
| |
| for (;i != ospf->lsa_refresh_queue.index; |
| i = (i + 1) % OSPF_LSA_REFRESHER_SLOTS) |
| { |
| if (IS_DEBUG_OSPF (lsa, LSA_REFRESH)) |
| zlog_info ("LSA[Refresh]: ospf_lsa_refresh_walker(): refresh index %d", i); |
| |
| refresh_list = ospf->lsa_refresh_queue.qs [i]; |
| |
| ospf->lsa_refresh_queue.qs [i] = NULL; |
| |
| if (refresh_list) |
| { |
| for (node = listhead (refresh_list); node;) |
| { |
| listnode next; |
| struct ospf_lsa *lsa = getdata (node); |
| next = node->next; |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_REFRESH)) |
| zlog_info ("LSA[Refresh]: ospf_lsa_refresh_walker(): refresh lsa %p (slot %d)", lsa, i); |
| |
| list_delete_node (refresh_list, node); |
| ospf_lsa_unlock (lsa); |
| lsa->refresh_list = -1; |
| listnode_add (lsa_to_refresh, lsa); |
| node = next; |
| } |
| list_free (refresh_list); |
| } |
| } |
| |
| ospf->t_lsa_refresher = thread_add_timer (master, ospf_lsa_refresh_walker, |
| ospf, ospf->lsa_refresh_interval); |
| ospf->lsa_refresher_started = time (NULL); |
| |
| for (node = listhead (lsa_to_refresh); node; nextnode (node)) |
| ospf_lsa_refresh (ospf, getdata (node)); |
| |
| list_delete (lsa_to_refresh); |
| |
| if (IS_DEBUG_OSPF (lsa, LSA_REFRESH)) |
| zlog_info ("LSA[Refresh]: ospf_lsa_refresh_walker(): end"); |
| |
| return 0; |
| } |
| |